Tivoli Version 6 Release 2. Reporting and Monitoring installation and configuration updates February, 2011

Transcription

1 Tioli Version 6 Release 2 Reporting and Monitoring installation and configuration updates February, 2011

2

3 Tioli Version 6 Release 2 Reporting and Monitoring installation and configuration updates February, 2011

4 ii IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

5 Contents Installing and configuring the Reporting and Monitoring feature Installing the reporting and monitoring feature... 1 Planning to install the Tioli Storage Manager reporting and monitoring feature System requirements for Tioli Storage Manager reporting and monitoring Work sheet for installation information... 6 Installing the Tioli Storage Manager reporting and monitoring feature on AIX and Linux... 7 Before reinstalling: confirm a complete uninstallation Installing the Tioli Storage Manager reporting and monitoring feature using the installation wizard Installing the Tioli Storage Manager reporting and monitoring feature using the console mode Installing the Tioli Storage Manager reporting and monitoring feature on Windows systems.. 13 Taking the first steps after you install the Tioli Storage Manager reporting and monitoring feature Accessing DB2 and configuring the Tioli Enterprise Portal serer on Aix and Linux systems Configuring Tioli Enterprise Portal serer on AIX and Linux systems Configuring the Tioli Enterprise Portal serer 19 Configuring Tioli Data Warehouse on Aix and Linux systems Configuring Tioli Data Warehouse Configuring summarization and pruning on AIX and Linux systems Configuring summarization and pruning on Windows systems Configuring historical data collection Configuring historical data collection Installing a reporting and monitoring agent.. 27 Installing a reporting and monitoring agent on a Tioli Storage Manager serer Installing a reporting and monitoring agent on an existing Tioli Monitoring serer Creating and configuring the reporting and monitoring agent instance using CandleManage Creating and configuring the reporting and monitoring agent instance using the command-line interface Creating and configuring the reporting and monitoring agent instance on Windows systems Configuring a data source for the reporting and monitoring feature using the Tioli Integrated Portal Installing software for custom reporting Uninstalling the Tioli Storage Manager reporting and monitoring feature Uninstalling the Tioli Storage Manager reporting and monitoring feature Uninstalling the Tioli Storage Manager reporting and monitoring feature Copyright IBM Corp. 1993, 2011 iii

6 i IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

7 Installing and configuring the Reporting and Monitoring feature Installing the reporting and monitoring feature AIX Linux Windows IBM Tioli Storage Manager reporting and monitoring proides information and reports about the IBM Tioli Storage Manager serers and client actiity. The Tioli Storage Manager reporting and monitoring feature installs the following components: IBM Tioli Monitoring, which includes the following components: IBM DB2 IBM Tioli Monitoring, which includes: - Tioli Enterprise Portal - Tioli Data Warehouse - Tioli Enterprise Monitoring Serer - Summarization Pruning Agent - Warehouse Proxy Agent Tioli Storage Manager reporting and monitoring agent To iew historical reports, (no access to current data on the Tioli Enterprise Portal) you must install the Administration Center. For details on installing the Administration Center, see Installing and configuring the Administration Center. For more details on how the Tioli Storage Manager data flows between components see the IBM Tioli Storage Manager Administrator's Guide for your operating system. To create your own reports, you must also install the Business Intelligence and Reporting Tools (BIRT) software. The Tioli Storage Manager reporting and monitoring feature does not hae an option to create custom reports using Tioli Storage Manager. For more details on using custom reporting, see Installing software for custom reporting on page 37. Related information IBM Tioli Storage Manager reporting and monitoring feature information roadmap Copyright IBM Corp. 1993,

8 Planning to install the Tioli Storage Manager reporting and monitoring feature AIX Linux Windows Before installing the Tioli Storage Manager reporting and monitoring feature, there are some decisions you must make. You hae IBM Tioli Monitoring currently installed on a serer If you are currently using IBM Tioli Monitoring, the Tioli Storage Manager reporting and monitoring feature can be installed on your existing IBM Tioli Monitoring serer but the following requirements must be met: The IBM Tioli Monitoring serer must be a fully-licensed ersion of IBM Tioli Monitoring. The IBM Tioli Monitoring serer must be at the 6.2 FP1 or later leel. Because the Tioli Enterprise Monitoring Serer controls the reporting and monitoring agent, the agent must be installed on your existing Tioli Enterprise Monitoring Serer. You can install the reporting and monitoring agent on any IBM Tioli Monitoring serer, but it is required on the Tioli Enterprise Monitoring Serer. For this type of reporting and monitoring installation, the Reporting and monitoring feature option would not be checked on the installation wizard and the IBM Tioli Monitoring serer is identified when prompted by the installation script. You would not check the Agent only option. The ersion of IBM Tioli Monitoring that you install with the reporting and monitoring feature can only be used for Tioli Storage Manager reporting and monitoring functions, and not for other functions such as monitoring operating systems, or other non-tioli products or data. You do not hae IBM Tioli Monitoring installed on a serer In this situation, you must install all components of the Tioli Storage Manager reporting and monitoring feature on one serer. The Tioli Storage Manager serer must be installed on a separate system. Besides the Reporting and monitoring feature component, the Reporting and monitoring agent component is also installed on the Tioli Storage Manager reporting and monitoring serer. Requirements for the Tioli Storage Manager reporting and monitoring agent configuration The only time you configure the reporting and monitoring agent on the serer where you installed the Reporting and monitoring feature component is when you hae the following conditions: If you hae an IT enironment that has less than 10 Tioli Storage Manager serers. If you want to establish a prototype of the Tioli Storage Manager serer to test the installation first. 2 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

9 Collecting data from multiple Tioli Storage Manager serers using this configuration requires creation of multiple reporting and monitoring agent instances and results in using large amounts of memory. For reporting and monitoring, you need an additional 4 GB or more of memory on the Tioli Storage Manager serer to proide optimum performance. For an IT enironment that has more than 10 Tioli Storage Manager serers, install the reporting and monitoring agent on each Tioli Storage Manager serer that you want to monitor. This configuration allows for the most efficient use of memory on both the Tioli Storage Manager serer and the IBM Tioli Monitoring serer. Installation scenarios for the reporting and monitoring feature Depending on the type of reporting installation you are performing, you install different components. The following situations describe three installation scenarios and list the components you install for each scenario: You hae Tioli Storage Manager, ersion 5.5 or 6.1 and you want to install the reporting and monitoring feature only. You install the reporting and monitoring agent on your Tioli Storage Manager serer. You install the following components on a different system which will be your Tioli Storage Manager reporting and monitoring serer: - Tioli Storage Manager reporting and monitoring feature - Reporting and monitoring agent - Reporting and monitoring languages - Tioli Storage Manager Administration Center For details on installing the Administration Center, see Installing and configuring the Administration Center. It is not aailable through the Tioli Storage Manager reporting and monitoring feature installation wizard. You are installing Tioli Storage Manager, ersion 6.2 for the first time and you want to install both Tioli Storage Manager serer and the Tioli Storage Manager reporting and monitoring feature. 1. You install Tioli Storage Manager, ersion 6.2 and the reporting and monitoring agent on one system. 2. You install the following components on a different system which will be your Tioli Storage Manager serer: Tioli Storage Manager reporting and monitoring feature Reporting and monitoring agent Reporting and monitoring languages Tioli Storage Manager Administration Center For details on installing the Administration Center, see Installing and configuring the Administration Center. It is not aailable through the Tioli Storage Manager reporting and monitoring feature installation wizard. You hae Tioli Storage Manager, ersion 5.5 or 6.1 installed and you want to upgrade to Tioli Storage Manager, ersion You upgrade your Tioli Storage Manager, ersion 5.5 or 6.1 serer to Tioli Storage Manager, ersion 6.2 and install the Tioli Storage Manager reporting and monitoring agent on this system. Installing and configuring the Reporting and Monitoring feature 3

10 2. You install the following components on a different system which will be your Tioli Storage Manager reporting and monitoring serer: Tioli Storage Manager reporting and monitoring feature Tioli Storage Manager reporting and monitoring agent Tioli Storage Manager reporting and monitoring languages Tioli Storage Manager Administration Center For details on installing the Administration Center, see Installing and configuring the Administration Center. It is not aailable through the Tioli Storage Manager reporting and monitoring feature installation wizard. System requirements for Tioli Storage Manager reporting and monitoring AIX Linux Windows There are hardware and software requirements your system must meet before the reporting and monitoring feature is installed. Hardware requirements These tables list the minimum hardware and software requirements needed to install the Tioli Storage Manager V6.2 reporting and monitoring feature. Use these requirements as a starting point, but you can find the latest information at Table 1 describes the hardware requirements for the Tioli Storage Manager reporting and monitoring feature. Table 1. Hardware requirements Type of hardware Hardware requirements Hardware Dual core Intel Pentium compatible processor or multiprocessor-based computer with a 2Ghz or greater processor Minimum 64-bit system for AIX Network interface card Disk space 30 GB free disk space (minimum). Requirements increase as historical data is gathered and stored in Tioli Data Warehouse. Memory Linux Windows Minimum, 10 GB free space made aailable in the home directory where the warehouse data is stored. 3 GB minimum AIX 4 GB minimum If Tioli Storage Manager monitoring agents are installed on the Tioli Monitoring serer, memory requirements increase quickly as the number of Tioli Storage Manager serers are monitored from that one IBM Tioli Monitoring serer. If a Tioli Storage Manager monitoring agent is installed on a Tioli Storage Manager serer, there is only a single instance of the agent is running on the Tioli Storage Manager serer and no increases in memory requirements are needed by the IBM Tioli Monitoring serer. 4 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

11 Table 1. Hardware requirements (continued) Type of hardware Hardware requirements Monitor Set your monitor resolution to 1024 x 768 (minimum) to iew the entire window. Software requirements Table 2 describes the minimum software requirements for the Tioli Storage Manager reporting and monitoring feature. Table 2. Software requirements Type of software Minimum software requirements Operating System Web browser Libraries See Table 3 on page 6 for a complete list of supported operating systems and components. A Web browser to log on and use the console. The Web browser can be installed on the same or a separate system. The following browsers can be used: Microsoft Internet Explorer 6.x (Windows systems only) Microsoft Internet Explorer 7.x Firefox 2.0 Firefox 3.0 If your browser meets these requirements but does not display correctly, consider using a different browser. Linux GNU C libraries, Version or later that is installed on the Tioli Storage Manager system. Red Hat Enterprise Linux and SUSE Linux Enterprise Serers: For Linux x86_32 serer: compat-libstdc (Red Hat Enterprise Linux) libstdc (Suse Linux) Communication Protocol Other software X Window System or X11 GUI For Linux x86_64 serer: Libaio.so.1 Libstdc++so.5 At least one of the following communication protocols: Named Pipes TCP/IP Version 4 or Version 6 Eclipse 3.3 and Business Intelligence and Reporting Tools (BIRT), ersion are required for creating custom reports AIX Linux Supplied with AIX and Linux software AIX Linux If you are accessing the Tioli Storage Manager reporting and monitoring serer remotely, you must tunnel the X11 serer back to your system. Windows If you are on a Windows system, you must hae an X11 Windows serer running. Installing and configuring the Reporting and Monitoring feature 5

12 Table 3 lists the operating systems that are supported by Tioli Monitoring and the reporting and monitoring feature. Table 3. Supported operating systems Feature: (IBM Tioli Monitoring serer, Operating systems reporting component, and data collection agent) Data collection agent only Windows 2003 SP2 x86 X X 32-bit Windows 2003 R2 SP2 X X x86 32-bit Windows 2003 SP2 x86 X X 64-bit Windows 2003 R2 SP2 X X x86 64-bit Windows 2008 x86 32-bit X X Windows 2008 x86 64-bit X X AIX 5.3 X X AIX 6.1 X X RHEL 5 x86 32-bit X X RHEL 5 x86_64 X SLES 10 x86 32-bit X X SLES 10 x86_64 X Important: If you are installing a reporting and monitoring agent, and you preiously installed an IBM Tioli Monitoring serer, you must install the reporting and monitoring agent on the existing Tioli Enterprise Monitoring Serer. The reporting and monitoring feature is only supported with IBM Tioli Monitoring, ersion 6.2 FP1 or later. Related tasks Installing a reporting and monitoring agent on page 27 Installing software for custom reporting on page 37 Work sheet for installation information AIX Linux Windows Use the work sheet to record information that you need during installation and administration of the Tioli Storage Manager reporting and monitoring feature. Table 4. Work sheet for installation information for Tioli Storage Manager reporting and monitoring Item Description Default alue* db2 user ID The user name and password for the administrator for the IBM Tioli Data Warehouse database. This user has permission to do all the administratie tasks in DB2. Windows User name: db2admin Password: AIX Linux User name: db2inst1 Password: 6 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

13 Table 4. Work sheet for installation information for Tioli Storage Manager reporting and monitoring (continued) Item Description Default alue* encryption key The encryption key needs to be the same for any agent trying to access the Tioli Enterprise Monitoring serer. IBMTioliMonitoringEncryptionKey Must be exactly 32 characters in length sysadmin ITMUser User name and password for access to the Tioli Enterprise Portal. User name and password for access to the Tioli Data Warehouse. This user has access to read the information from the WAREHOUS database. Windows User name: sysadmin Password: Windows User name: Password: ITMuser AIX Linux User name: itmuser Password: Attention: AIX Linux You are only prompted for this during configuration of the warehouse, not at installation time. DB2 port default port number *Best practices are to use the default alues listed here. If you change these alues ensure that you document them because they are needed later. Installing the Tioli Storage Manager reporting and monitoring feature on AIX and Linux AIX Linux You can install the Tioli Storage Manager reporting and monitoring feature on an AIX and Linux system using the Tioli Storage Manager reporting and monitoring installation wizard or using the console mode. Confirm your system meets the system hardware and software and component requirements. See System requirements for Tioli Storage Manager reporting and monitoring on page 4. Confirm you hae the required access priileges. See Work sheet for installation information on page 6. If you hae uninstalled a preious ersion of the Tioli Storage Manager reporting and monitoring feature, before you reinstall, confirm that the DB2 users, db2inst1 and db2fenc1 do not exist. See the section, Before reinstalling: confirm a complete uninstallation. Installing and configuring the Reporting and Monitoring feature 7

14 Before reinstalling: confirm a complete uninstallation AIX Linux Windows If you hae installed a preious ersion of the Tioli Storage Manager reporting and monitoring feature, ensure that you hae performed a successful uninstall before reinstalling: To learn more about uninstalling isit: Uninstalling on AIX and Linux, and Uninstalling on Windows systems Related tasks Installing the Tioli Storage Manager reporting and monitoring feature using the installation wizard Installing the Tioli Storage Manager reporting and monitoring feature using the console mode on page 10 Installing the Tioli Storage Manager reporting and monitoring feature using the installation wizard AIX Linux You can install the Tioli Storage Manager reporting and monitoring feature using the Tioli Storage Manager reporting and monitoring installation wizard. See Installing the Tioli Storage Manager reporting and monitoring feature on AIX and Linux on page 7 for prerequisites. If you are installing the Tioli Storage Manager reporting and monitoring feature from a DVD, complete the following steps: 1. Insert the Tioli Storage Manager reporting and monitoring feature DVD into the DVD drie. 2. Ensure that the DVD is mounted on directory /ddrom and change to that directory. If you downloaded the program from Passport Adantage as an executable file or as a tar file, complete the following steps: 1. Change to the directory where you downloaded the executable file. Tip: This file system requires approximately 6.5 GB to 7 GB of free disk space. 2. AIX Change the file permissions by entering the following command: chmod +x Cxxxxxx.bin where xxxxxx is the part number, for example: CZ1N1ML. 3. Begin extracting the required files by running the following command: AIX./Cxxxxxx.bin Attention: AIX There are two self-extracted packages for AIX. These steps need to be run for each package. Linux tar -xf Cxxxxxx.tar where xxxxxx is the part number, for example: CZ1N1ML. 8 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

15 Attention: If you are installing on a remote system using an X display, and the local system does not hae an X serer running, the installation may fail. If this happens, you must run the wizard in console mode: Installing the Tioli Storage Manager reporting and monitoring feature using the console mode on page 10. To install the Tioli Storage Manager reporting and monitoring feature, complete the following steps: 1. After all the files hae been extracted, to start the installation GUI wizard, issue the following command:./install.bin The Tioli Storage Manager reporting and monitoring installation wizard displays. 2. Select the language for the wizard at the bottom of the page and click OK. 3. Accept the license agreement in order to proceed. Click Next. 4. On the Component Selection page, depending on the purpose of this installation, select one of the following options: For an IBM Tioli Monitoring serer, select the Reporting and monitoring feature option. This option installs the following components: IBM DB2 9.5 IBM Tioli Monitoring Reporting and monitoring agent For the reporting and monitoring agent only, select the Reporting and monitoring agent only option. Use this option to monitor a Tioli Storage Manager serer, and install the agent on the Tioli Storage Manager serer you want to monitor. Remember: For all Linux platforms that are only supported on the reporting and monitoring agent, you must use this option. See the Supported operating systems table in the following link for more on supported platforms: System requirements for Tioli Storage Manager reporting and monitoring on page 4 If you want a language other than English, choose one of the following options: If you chose to install the Reporting and monitoring feature, select the Language package for feature option, and the Language package for monitoring agent only option. If you chose to install the Reporting and monitoring agent only option, install the Language package for monitoring agent only option. Attention: The installer checks the ersion leel of any components you hae preiously installed. You can get the message: No components to install in the following scenarios: If you are installing the Reporting and monitoring feature, the feature language package, and the monitoring agent language package, and they are all at the same leel or higher. If you are installing just the reporting and monitoring agent and the agent language package and they are all at the same leel or higher. If you get this message, select Enter to exit out of the installer. Installing and configuring the Reporting and Monitoring feature 9

16 5. If you selected the option to install the Reporting and monitoring feature component, accept the Tioli Monitoring license agreement in order to proceed. Click Next. 6. Select the destination directory for this installation. If you are installing into an existing IBM Tioli Monitoring enironment, choose the existing instance directory where that code is installed. 7. The DB2 Enterprise Serer Edition page is displayed. In the DB2 Administrator password field, enter the password, and enter it again for erification purposes. Passwords must be exactly eight characters in length. Leae all other selections with the default. Click Next. 8. The Encryption page is displayed, with the 32-character encryption key. Click Next to continue. Make note of this key for later use, or refer to the installation information work sheet for the default key when you need it again. 9. Accept the default installation location and click Next. 10. You are presented with the pre-installation summary of your configuration. Perform one of the following tasks: To start the installation, click Install. To make corrections or changes, click Preious. At the end of the installation, the Installation Results page presents a message with the installation results. If there were any errors during the installation, the summary panel lists the errors and directs you to an error log file. To iew historical reports, you must install the Administration Center. If you hae not installed the Administration Center, install it next. See Installing and configuring the Administration Center for details. If you plan to install the Tioli Storage Manager reporting and monitoring agent on the Tioli Storage Manager serer, this installation must be done before continuing to the other configuration steps. Related tasks: Accessing DB2 and configuring the Tioli Enterprise Portal serer on Aix and Linux systems on page 16 Configuring Tioli Data Warehouse on Aix and Linux systems on page 20 Configuring summarization and pruning on AIX and Linux systems on page 22 Configuring historical data collection on page 24 Installing the Tioli Storage Manager reporting and monitoring feature using the console mode AIX Linux You can install the Tioli Storage Manager reporting and monitoring feature using the command-line console mode installation. See Installing the Tioli Storage Manager reporting and monitoring feature on AIX and Linux on page 7 for prerequisites. If you are installing the Tioli Storage Manager reporting and monitoring feature from a DVD, complete the following steps: 1. Insert the Tioli Storage Manager reporting and monitoring feature DVD into the DVD drie. 10 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

17 2. Ensure that the DVD is mounted on directory /ddrom and change to that directory. If you downloaded the program from Passport Adantage as an executable file or as a tar file, complete the following steps: 1. Change to the directory where you downloaded the executable file. Tip: This file system requires approximately 6.5 GB to 7 GB of free disk space. 2. AIX Change the file permissions by entering the following command: chmod +x Cxxxxxx.bin where xxxxxx is the part number, for example: CZ1N1ML. 3. Begin extracting the required files by running the following command: AIX./Cxxxxxx.bin Attention: AIX There are two self-extracted packages for AIX. These steps need to be run for each package. Linux tar -xf Cxxxxxx.tar where xxxxxx is the part number, for example: CZ1N1ML. Attention: If you are installing on a remote system using an X display, and the local system does not hae an X serer running, the installation may fail. If this happens, you must unset the DISPLAY enironment ariable and restart the installation. To install the Tioli Storage Manager reporting and monitoring feature in console mode, complete the following steps: 1. Run the following command from the install directory. This command starts the text-based install program. install.bin -i console 2. Choose the locale by entering the number for your language. Press Enter for English (the default) and to continue. 3. Type 1 to accept the license agreement. Press Enter to proceed. 4. Choose one of the following options, and enter your selection. Type 1- Reporting and monitoring feature from the Component Selection window to install the following components: DB2 9.5 IBM Tioli Monitoring Tioli Storage Manager reporting and monitoring agent Type 2- Reporting and monitoring agent only to install only the reporting and monitoring agent on an existing Tioli Storage Manager serer. Remember: For all Linux platforms that are only supported on the reporting and monitoring agent, you must use this option. See the Supported operating systems table in the following link for more on supported platforms: System requirements for Tioli Storage Manager reporting and monitoring on page 4 5. If you want a language other than English, choose one of the following options: Installing and configuring the Reporting and Monitoring feature 11

18 If you chose to install the feature, type 3 and 4, separated by commas. If you chose to install the Reporting and monitoring agent only option, type 4 Press Enter. Attention: The installer checks the ersion leel of any components you hae preiously installed. You can get the message: No components to install in the following scenarios: If you are installing the Reporting and monitoring feature, the feature language package, and the monitoring agent language package, and they are all at the same leel or higher. If you are installing just the reporting and monitoring agent and the agent language package and they are all at the same leel or higher. If you get this message, select Enter to exit out of the installer. 6. If you selected the option to install the Reporting and monitoring feature component, accept the Tioli Monitoring license agreement to proceed. 7. Press enter to accept the destination directory. If you are installing into an existing IBM Tioli Monitoring enironment, choose the exact directory where that code is installed. 8. Enter the DB2 administrator password. Passwords must be exactly 8 characters in length. Press Enter. 9. Re-enter the password you selected. Press Enter. 10. Press Enter to accept the default encryption key. 11. Press Enter. The pre-installation summary displays. 12. Press Enter to accept the pre-installation summary of your configuration and start the installation. 13. Press Enter to exit the console mode installation program. To iew historical reports, you hae to install the Administration Center. If you hae not installed the Administration Center, install it next. See Installing and configuring the Administration Center for details. After the Tioli Storage Manager reporting and monitoring console mode installation has completed, you must complete the following tasks before you can collect historical data. If you plan to install the Tioli Storage Manager monitoring agent on the Tioli Storage Manager serer, that must be done before continuing to the other configuration steps. Accessing DB2 and configuring the Tioli Enterprise Portal serer on Aix and Linux systems on page 16 Configuring Tioli Data Warehouse on Aix and Linux systems on page 20 Configuring summarization and pruning on AIX and Linux systems on page 22 Configuring historical data collection on page IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

19 Installing the Tioli Storage Manager reporting and monitoring feature on Windows systems Windows You can install the Tioli Storage Manager reporting and monitoring feature using the Tioli Storage Manager reporting and monitoring installation wizard. Confirm that your system meets the minimum hardware, software and system component requirements. See System requirements for Tioli Storage Manager reporting and monitoring on page 4. Confirm you hae the required access priileges. See Work sheet for installation information on page 6. To install the Tioli Storage Manager reporting and monitoring feature, complete the following steps: 1. Start the Tioli Storage Manager reporting and monitoring feature installation wizard using one of these methods: If you are installing the Tioli Storage Manager reporting and monitoring feature using the DVD, insert the DVD into a DVD drie, naigate to that drie, and click the install.exe file to begin the installation wizard.. If you downloaded the program from the Passport Adantage site as an executable file, or downloaded the package file from the Tioli Storage Manager FTP downloads site at: ftp://public.dhe.ibm.com/storage/tiolistorage-management/maintenance/, complete these steps to start the installation wizard: a. Verify that the executable file is in the directory where you want the extracted files to be located, and that you hae enough space to store the installation files when they are extracted from the product package. Use short path names for the directory to aoid problems with the 255 character path limit on Windows systems. For example: C:\tsm_images. For space requirements see the Passport Adantage download document. Important: Ensure that there are no spaces, and no non-asci characters in the file name or path. b. Naigate to the directory where you placed the executable or package file. c. Extract the installation files. d. Double-click the install.exe file to start the installation wizard. 2. Select the language for the installation wizard at the bottom of the page and click OK. 3. Accept the first of two license agreements to proceed, and click Next. 4. On the Component Selection page, select the components that you want to install and click Next. To iew the product in a language other than English, select the Language package for feature option and the Language pack for agent only option. Installing and configuring the Reporting and Monitoring feature 13

20 Attention: The installer checks the ersion leel of any components that you hae preiously installed. You might get the message: No components to install in the following scenarios: If you are installing the Reporting and monitoring feature, the feature language package, and the monitoring agent language package, and they are all at the same leel or higher. If you are installing just the reporting and monitoring agent and the agent language package and they are all at the same leel or higher. If you get this message, select Enter to exit out of the installer. 5. If you selected the option to install the Reporting and monitoring feature component, accept the second license agreement to proceed, and click Next. 6. Select the destination directory for this installation. If you are installing into an existing IBM Tioli Monitoring enironment, choose the existing instance directory and click Next. The default directory is C:\IBM Note: You cannot change the installation directory after you click Next. You must uninstall and begin again if you want to change the installation directory. 7. The DB2 Enterprise Serer Edition page is displayed. In the DB2 Administrator password field, type a password for the ITMuser, and then enter it again for erification purposes. Leae as the default port number alue, and click Next. Tip: The DB2 password must be 8-14characters in length, and the IBM Tioli Monitoring user password cannot exceed 14 characters in length. 8. The Encryption page is displayed, with the 32-character encryption key prefilled. Click Next to proceed. Make note of this key for later use, or refer to the installation work sheet when you need this information later. 9. The WebSphere Business Monitor Data Access Setup page is displayed. In the Sysadmin ID password field, enter the password twice. Click Next. This ID is the user ID and password for the Tioli Enterprise Portal, where you can monitor real-time data. 10. The Database Access Setup page is displayed. In the Database user ID password field, enter the password twice and click Next. This ID is the user ID and password for the Tioli Enterprise Portal Serer database. Tip: The password cannot exceed 14 characters in length. 11. You are presented with the pre-installation summary of your configuration. Perform one of the following tasks: To start the installation, click Install. To make corrections or changes, click Preious. At the end of the installation, the Installation Results page presents a message with the installation results. If there were any errors during the installation, the summary page lists the errors and directs you to an error log file. Note: If you installed using the default directory, the log file can be found at: C:\IBM\log.txt. To iew historical reports, you must install the Administration Center. If you hae not installed the Administration Center yet, install it next. See Installing and configuring the Administration Center for details. 14 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

21 After the Tioli Storage Manager reporting and monitoring installation wizard has completed the installation, you must complete the following tasks before you can collect historical data. If you plan to install the reporting and monitoring agent on the Tioli Storage Manager serer, that must be done before continuing to the other configuration steps. 1. Configure the Tioli Enterprise Portal Serer. 2. Configure the Tioli Data Warehouse database. 3. Configure the reporting and monitoring agent. 4. Configure the summarization and pruning agent. 5. Configure the historical data collection configuration. Related tasks Configuring the Tioli Enterprise Portal serer on page 19 Configuring Tioli Data Warehouse on page 21 Installing a reporting and monitoring agent on page 27 Configuring summarization and pruning on Windows systems on page 23 Taking the first steps after you install the Tioli Storage Manager reporting and monitoring feature AIX Linux Windows After you install the Tioli Storage Manager reporting and monitoring feature, there are seeral configuration tasks that you need to perform to enable reporting for historical data collection. Important: AIX Linux All post installation configuration steps must be performed as the root user. 1. AIX Linux Configure DB2 to access the Tioli Data Warehouse. See Accessing IBM DB2 on Aix and Linux systems on page AIX Linux Configure the Tioli Enterprise Portal Serer to iew real-time monitoring information for the configured Tioli Storage Manager serers and clients. You must also configure the portal to collect and iew historical data. See Accessing DB2 and configuring the Tioli Enterprise Portal serer on Aix and Linux systems on page Windows Configure the Tioli Enterprise Portal Serer to iew real-time monitoring information for the configured Tioli Storage Manager serers and clients. You must also configure the portal to collect and iew historical data. See Configuring the Tioli Enterprise Portal serer on page AIX Linux Configure the IBM Tioli Data Warehouse and the Summarization and Pruning Agent to collect and iew reports on the historical data using the Manage Tioli Enterprise Monitoring Serices application. See Configuring Tioli Data Warehouse on Aix and Linux systems on page 20 See Configuring summarization and pruning on AIX and Linux systems on page Windows Configure the IBM Tioli Data Warehouse and the Summarization and Pruning Agent in order to collect and iew reports on the historical data using the Manage Tioli Enterprise Monitoring Serices application. See Configuring Tioli Data Warehouse on page 21 Installing and configuring the Reporting and Monitoring feature 15

22 See Configuring summarization and pruning on Windows systems on page AIX Linux Configure the Tioli Enterprise Portal to begin collecting the historical data. See Configuring historical data collection on page Windows Configure the Tioli Enterprise Portal to begin collecting historical data. See Configuring historical data collection on page Install the Tioli Storage Manager monitoring agent on each of the Tioli Storage Manager serers where you plan to configure a monitoring agent instance to run. See Installing a reporting and monitoring agent on page 27. Tip: When you hae less than 10 Tioli Storage Manager serers to monitor, use the Tioli Storage Manager monitoring agent that is already installed on your Tioli Monitoring serer to get information from the Tioli Storage Manager serers. This process is the best practice if you want the Tioli Storage Manager reporting and monitoring serer to receie information about more than 10 Tioli Storage Manager serers. 9. AIX Linux Create and configure the Tioli Storage Manager monitoring agent instance using the Candle Manage program or the command line. See Creating and configuring the reporting and monitoring agent instance using CandleManage on page 30. See Creating and configuring the reporting and monitoring agent instance using the command-line interface on page Windows Create and configure each Tioli Storage Manager monitoring agent instance using the Manage Tioli Enterprise Monitoring Serices application on the Tioli Storage Manager serer. See Creating and configuring the reporting and monitoring agent instance on Windows systems on page Configure the data source for the using the Tioli Integrated Portal. See Configuring a data source for the reporting and monitoring feature using the Tioli Integrated Portal on page 36. Accessing DB2 and configuring the Tioli Enterprise Portal serer on Aix and Linux systems AIX Linux Configure the Tioli Enterprise Portal serer so that you can monitor real-time data as well as collect and iew historical data. First, ensure that you hae permissions to access the DB2 database. Accessing IBM DB2 on Aix and Linux systems: AIX Linux Before you start the post installation steps, ensure that you hae permissions to access IBM DB2. Important: All post installation steps must be performed as the root user. Complete the following steps to ensure that you hae access to DB2 and permission to issue DB2 commands. 16 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

23 1. To determine what group has DB2 access, and what members are in the group, complete these steps: a. Issue the following command to determine what group has db2 admin priilege: db2 get dbm cfg grep SYSADM The command output should look similar to this example: /#db2 get dbm cfg grep SYSADM SYSADM group name(sysadm_group) = DB2GRP1 b. Check the /etc/group file to see the members of this group: cat /etc/group The command output should look similar to this example: /#cat /etc/group at:!:25: audio:x:17: bin:x:1:daemon cdrom:x:20: console:x:21: daemon:x:2: dialout:x:16:ctdb2 disk:x:6: floppy:x:19: ftp:x:49: mail:x:12: man:x:62: modem:x:43: news:x:13: db2grp1:x:12312:root,joe,admin c. Look for a line similar to the last line in this example. This line, which starts with db2grp1 means that root, joe and admin are members of the db2grp1 group. If root is not on this line, add it to the end of the line. To do this complete the following steps: 1) Edit the /etc/group file. 2) Add root to the end of the line that starts with the text, db2grp1. If there are already one or more users at the end of this line, add root to the end of the line, preceded by a comma. 2. To ensure that you hae permissions to issue DB2 commands, complete the following steps: a. Verify that the db2profile script exists in the /home/db2inst1/sqllib directory. b. Edit the.profile or.bashrc file, depending on the shell being used. c. Append the following line to the file, if it is not already there, and note the space after the period and before the slash:. /home/db2inst1/sqllib/db2profile d. After saing the file, log out of the system and then log back in. 3. Run the DB2 start command: /home/db2inst1/sqllib/adm/db2start. Tip: If you see this message, then DB2 was already running. If it was not running, the command starts the DB2 serer. 09/15/ :14: SQL1026N The database manager is already actie. SQL1026N The database manager is already actie. 4. Open the following file in a text editor: Installing and configuring the Reporting and Monitoring feature 17

24 Linux /etc/init.d/itmagents1 AIX /etc/rc.itm1 5. Locate the line that has the function, start_all(). It is near the top of the file. 6. Add the db2start command to this function if it is not already there: Linux /bin/su - root -c "/home/db2inst1/sqllib/adm/db2start >/de/null 2>&1" AIX /usr/bin/su - root -c "/home/db2inst1/sqllib/adm/db2start > 7. Delete the following default sk command, if it exists: /de/null 2>&1" Linux /bin/su - root -c "/opt/tioli/tsm/reporting/itm/bin/itmcmd agent start sk >/de/null 2>&1" AIX /usr/bin/su - root -c "/opt/tioli/tsm/reporting/itm/bin/itmcmd agent start sk >/de/null 2>&1" 8. Sae the file. After setting up DB2 access, configure the Tioli Enterprise Portal serer. Configuring Tioli Enterprise Portal serer on AIX and Linux systems AIX Linux Configure the Tioli Enterprise Portal serer to send the historical data to the IBM Tioli Data Warehouse database to collect and iew historical data as well as monitor real-time data. Before starting this task, ensure that you hae started DB2: Accessing IBM DB2 on Aix and Linux systems on page 16 Configure the portal serer using the CandleManage program: 1. Start the Tioli Enterprise Monitoring Serices: a. Go to the directory where the CandleManage program is located by issuing the following command: cd /opt/tioli/tsm/reporting/itm/bin b. Start the CandleManage program, by issuing the following command:./candlemanage & Note: CandleManage is a graphical user interface used for managing IBM Tioli Monitoring on UNIX systems and requires X-Windows. c. Right-click Tioli Enterprise Monitoring Serer and select Start serice. 2. Right-click Tioli Enterprise Portal Serer and select Configure. 3. From the Common Eent Console Configuration window, click OK to open the Configure Tioli Enterprise Portal Serer window. Select the Agent Parameters tab. 18 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

25 4. To iew historical data, type the following passwords in the password fields: a. The DB2 admin ID db2inst1 b. The TEPS DB user ID itmuser c. The Warehouse DB user ID itmuser 5. Click Sae, and return to the CandleManage menu. 6. Right-click on Tioli Enterprise Portal Serer > Start serice to start the portal serer. After configuring the portal, configure the Tioli Data Warehouse. Related tasks Configuring Tioli Data Warehouse on Aix and Linux systems on page 20 Configuring the Tioli Enterprise Portal serer Windows Configure the Tioli Enterprise Portal serer to send collect and send historical data to the IBM Tioli Data Warehouse database, so you can iew the historical data. Tioli Enterprise Portal allows you to monitor real-time data. By default, the Tioli Enterprise Portal serer is configured for you to monitor the real-time data. You do not hae to do anything with the serer to be able to iew the real-time data in the portal. Before starting these steps, ensure that DB2 is started. You can do this by checking the Windows system tray in the lower-right corner of your desktop; you should see either a red or green dot. If the dot is green, DB2 is running. If it is red, right-click on the red dot and select Start DB2. Tip: If you do not see the icons in the system tray, you can look for them in your serices window instead. Complete the following steps to configure and start the Tioli Enterprise Portal serer: 1. Click Start > Programs > IBM Tioli Monitoring > Manage Tioli Monitoring Serices. 2. Right-click Tioli Enterprise Portal Serer and select Reconfigure. The Tioli Enterprise Portal Serer Configuration window opens. 3. Click OK to open the Tioli Enterprise Portal Serer Configuration window. 4. Click OK to accept the defaults. 5. Click Yes to Do you want to reconfigure the warehouse connection information for the Tioli Enterprise Portal Serer. 6. The Warehouse Proxy Database Selection window opens. Select DB2 and click OK. 7. Type the DB2 admin password in the Admin Password field, accept the default alues for remaining fields, and click OK. 8. The message: Successfully configured warehouse data source displays. If you do not receie this message, you did not enter the correct passwords. Check your passwords on the installation worksheets and re-enter them. 9. Click OK when the Common Eent Console Configuration window opens, to accept the default alues. Installing and configuring the Reporting and Monitoring feature 19

26 10. Return to the Manage Tioli Monitoring Serices window, right-click Manage Tioli Enterprise Portal Serer, and click Start. Related tasks Configuring Tioli Data Warehouse on page 21 Configuring Tioli Data Warehouse on Aix and Linux systems AIX Linux The IBM Tioli Data Warehouse database (an IBM DB2 database named WAREHOUS) holds the historical reports that are collected by the Tioli Storage Manager reporting and monitoring agent. After installing the Tioli Storage Manager reporting and monitoring feature, you must create and configure this DB2 database from the DB2 command line. Complete the following tasks before creating the DB2 warehouse database: Ensure that you hae configured the Tioli Enterprise Portal serer. Decide where to store this database. By default, it is stored in your home directory. Ensure that the directory has at least 10 GB of disc space aailable. If needed, update the directory to increase its size, or change the default location where DB2 is storing the database to a directory with the required disc space. Ensure that you hae configured the root profile using the information in this topic: Accessing IBM DB2 on Aix and Linux systems on page 16. If you need to change the location to a different directory, run the following commands: db2 attach to db2inst1 db2 update dbm cfg using DFTDBPATH /dbpath Where /dbpath is the desired directory for the database. db2stop db2start 1. Create the DB2 WAREHOUS database by issuing the following commands: db2 create database WAREHOUS using codeset utf-8 territory US db2 connect to WAREHOUS 2. To allow historical data to be collected, place the following commands into an SQL script file and then run the script. Complete the following steps to add the commands and run the SQL script: a. Create an SQL script file, for example: KHD_DB2_crt_BP_TBSP.sql b. Add the following commands to the SQL file, then sae it and exit: -- CREATE a Bufferpool of page size 8K CREATE BUFFERPOOL ITMBUF8K IMMEDIATE SIZE 2501 PAGESIZE 8 K; -- CREATE a Regular Tablespace using the 8K Bufferpool CREATE REGULAR TABLESPACE ITMREG8K PAGESIZE 8 K MANAGED BY SYSTEM USING ( itmreg8k ) BUFFERPOOL ITMBUF8k; -- CREATE a System tablespace using the 8K Bufferpool CREATE SYSTEM TEMPORARY TABLESPACE ITMSYS8K PAGESIZE 8 K MANAGED BY SYSTEM USING ( itmsys8k ) BUFFERPOOL ITMBUF8k; -- CREATE a User tablespace using the 8K Bufferpool 20 IBM Tioli : Reporting and Monitoring installation and configuration updates February, 2011

27 CREATE USER TEMPORARY TABLESPACE ITMUSER8K PAGESIZE 8 K MANAGED BY SYSTEM USING ( itmuser8k ) BUFFERPOOL ITMBUF8k; c. Enter the following command to run the SQL script and set up the WAREHOUS database: db2 -stf KHD_DB2_crt_BP_TBSP.sql 3. Enter the following commands to grant access to the itmuser user ID: db2 "GRANT CONNECT ON DATABASE TO USER itmuser" db2 "GRANT CREATETAB ON DATABASE TO USER itmuser" 4. Configure the warehouse proxy by completing the following steps: a. Start the CandleManage Program. b. In the Manage Tioli Enterprise Monitoring Serices window, right-click the Warehouse Proxy and click Configure. 5. In the Configure Warehouse Proxy window, select the TEMS Connection tab, and remoe the checkmark in the No TEMS checkbox field. 6. In the TEMS Hostname field, specify the hostname of the TEMS serer. 7. In the Configure Warehouse Proxy window, select the Agent Parameters tab. 8. In the section JBDC Driers, select Add. 9. Go to the directory /opt/tioli/tsm/reporting/db2/jaa, select the following drier files and click Open: db2jcc.jar db2jcc_license_cu.jar 10. Enter jdbc:db2://localhost:<port number>/warehous in the Warehouse URL field. Port is the default. 11. Enter com.ibm.db2.jcc.db2drier in the Warehouse drier field. 12. In the Warehouse User ID field, type itmuser and enter the password. 13. Click Test DB connection to test the database connection. 14. Click Sae to return to the CandleManage menu. 15. Right-click Warehouse Proxy and select Start Serice. To complete the steps to enable reporting for historical data collection, configure and actiate the Summarization and Pruning agent. Related tasks Linux AIX Configuring summarization and pruning on AIX and Linux systems on page 22 Configuring Tioli Data Warehouse Windows After installing the Tioli Storage Manager reporting and monitoring feature and configuring the Tioli Enterprise Portal serer, you must manually configure the IBM Tioli Data Warehouse for historical reporting. Ensure that you hae configured the Tioli Enterprise Portal serer before completing this task. To configure Tioli Data Warehouse for historical reporting, complete the following steps: 1. To start the Tioli Monitoring Serices application, click Start > All Programs > IBM Tioli Monitoring > Manage Tioli Monitoring Serices. 2. Right-click the Warehouse Proxy and click Reconfigure. Installing and configuring the Reporting and Monitoring feature 21