LEEB HARDNESS TESTER TH130/132/134

Transcription

1 LEEB HARDNESS TESTER TH130/132/134 Impact size, easy operation Wide measuring range in HLD, direct display of converted hardness values in, HRB, HRC,HRA,, HS High applicability, can be used for hardness testing of most metals Test at any angle even upside down Optional printer TA250 available Easy measurement on large & heavy workpieces Measuring in confined spaces of large workpieces TH130: integrated with D impact device for normal hardness testing TH132: integrated with C impact device for hardness testing on thin, light and face-hardened workpieces TH134: integrated with DL impact device for hardness testing of deep grooves and mould-face (such as tooth surface) workpieces Refer to page 8 for technical specifications of various impact devices Impact device TH130 D integrated TH132 C integrated TH134 DL integrated Hardness scales Measuring range/materials Output Surface Roughness of Work piece Min. radius of Work piece (convex / concave) HLD,, HRC, HRA,, HS 6HLD(760 30HLD) 99 average readings RS232 to printer 1.6 (Ra) Rmin = 50mm(with support ring Rmin= 10mm) HLD,, HRC,, HS 12HLC 99 average readings RS 232 to printer 0.4 (Ra) Rmin = 11mm (with support rings) HLDL,, HRC, HRB,, HS 12HLDL 99 average readings RS232 to printer 1.6 (Ra) Rmin = 10mm Main Unit 1 Test block 1 Charger 1 Connecting cable for TH130 1 Protection pocket 1 Min. Work piece weight Min. Work piece thickness with coupling 2~5kg on stable support 0.05~2kg with compact coupling 0.5~1.5kg on stable support 0.02~0.5kg with compact coupling 1mm 2~5kg on stable support 0.05~2kg with compact coupling Printer TA230 (see page 47) Min. Thickness of hardened layers 0.2mm Indentation depth Charging time Continuous working time Overall dimensions 3h 60 h Rechargeable Li-ion batteries g 175g 200g TH134 needle impact device integrated 1

2 LEEB HARDNESS TESTER TH150/152/154 ISO 9001 Fashionable face and compact size Available of conversion among HL, HRB, HRC,,, HS Large LCD with backlight up to 256 data Connecting with printer by RS232 Low battery indication Test at any direction, even upside down TH150: integrated with D impact device for normal hardness testing TH152: integrated with C impact device for hardness testing on thin, light and face-hardened workpieces TH154: integrated with DL impact device for hardness testing of deep grooves and mould-face (such as tooth surface) workpieces Refer to page 8 for technical specifications of various impact devices Impact device TH150 D integrated TH152 C integrated TH154 DL integrated Hardness scales Measuring range / materials Output Surface Roughness of Work piece HLD,, HRC, HRB,, HS 6HLD( ( Ra) 30HLD) HLC,, HRC, HRB,, HS 12HLC 256 average readings RS232 to printer 0.4 ( Ra) HLDL,, HRC, HRB,, HS 12HLDL 1.6 ( Ra) Main Unit 1 Test block 1 Battery 3V Li CR1/2 AA 1 Connecting cable 1 Min. radius of Work piece (convex/concave) Min. Work piece weight Rmin = 11mm (with support ring Rmin= 10mm) 2~5kg on stable support0.05~2kg with compact coupling Rmin=11mm (with support ring ) 0.5~1.5kg on stable support0.02~0.5kg with compact coupling Rmin = 50mm (with support ring Rmin=10mm) 2~5kg on stable support0.05~2kg with compact coupling Printer TA230 (see page 47) Min. Work piece thickness with coupling 1mm Min. Thickness of hardened layers 0.2mm Indentation depth Continuous working time Dimensions 300 h (without backlight) Batteries 3V Li-ion CR1/2 AA mm mm mm 150 g 145g 170 g 2 TH154 needle impact device integrated

3 LEEB HARDNESS TESTER TH170 USB communication interface Automatic identification of Impact test direction of 270 average readings in 9 files Upper and lower limit setting Automatically switch off Backlight for convenient use in darkness Battery capacity display AAA 1.5V battery Integrated calibration function Standard Impact Device Hardness scales Measuring range / materials Measuring direction Output Surface Roughness of Work piece Min. radius of Work piece (convex/concave) Min. work piece weight Min. Work piece thickness with coupling Min. Thickness of hardened layers Indentation depth Continuous working time Dimensions D integrated HLD,, HRC, HRB,, HS 360 6HLD(760 30HLD) 270 average readings in 9 group files USB ( Ra) Rmin = 50mm (with support ring Rmin= 10mm) 2~5kg on stable support 0.05~2kg with compact coupling 150 h (without backlight) AAA 1.5V batteries (2pcs) g Main unit 1 Test block 1 Battery AAA 1.5V 2 Connecting cable 1 Optional accessories 3

4 LEEB HARDNESS TESTER TH160 ISO 9001 Large LCD with back-light, showing all functions and parameters On-Board memory holds groups of data Automatic identification Impact Devices and test direction (Except G impact device) Time and date setting; auto-clock Integrated thermal printer, print all test results and histogram Li Battery, low voltage indication and sound alarm Upper / lower limits setting and sound alarm Software to connect with PC Direct display of hardness scales HRB, HRC, HRA,,, HS, HL Conversion to tensile strength (U.T.S.) for all metallic materials Wide measuring range Six Impact Devices are available for special applications Hardness scale Measuring range Tensile strength U.T.S. range Statistics function Standard Impact Device Optional Impact Devices Min. Radius of Workpiece (convex/concave) Max. Workpiece Hardness Min. Workpiece weight Min. Workpiece thickness Min. thickness of hardened surface Continuous Working time Charging time Humidity Overall dimensions HL, HRC, HRB, HRA,,, HS groups (Impact times: 32-1) 374~2652 MPa Average / Max / Min value calculation, limits setting and alarm D DC/DL/C/D+15/G (See page 8) Rmin = 50mm (with support ring Rmin= 10mm) Rechargeable Li Battery About 100h (without printing and backlight) 2.5~4 hours 90% g (including Impact Device and printer) 4 Main unit with removable printer 1 Impact device type D 1 Test block HLD 1 Charger 1 Connecting cable 1 Printing paper Special Impact Devices (See page 8) Dataview software Dataview for TH160

5 LEEB HARDNESS TESTER TH140 Large LCD with backlight, showing all functions and parameters On-Board memory holds groups of data Software to connect with PC Upper and lower limit and sound alarm Press HELP key can obtain operating tips in any displaying interface Direct display of hardness scales HRB, HRC, HRA,,, HS,HL Conversion to tensile strength (U.T.S) For all metallic materials Test at any angle, even upside down Removable printer included Wide measuring range Six Impact Devices are available for special application Battery indication and sound alarm Hardness scale Measuring range Tensile strength U.T.S. range Standard Impact Device Optional Impact Devices Min. Radius of Workpiece (convex/concave) Max. Workpiece Hardness Min. Workpiece weight Min. Workpiece thickness Min. thickness of hardened layers Continuous Working time Charging time Humidity Overall dimensions HL, HRC, HRB, HRA,,, HS group (Impact times:32-1) 374~2652 MPa D DC/D+15/G/C/DL (See page 8) Rmin = 50mm (with special support ring Rmin= 10mm) Rechargeable NiMH Battery, 5 1.2V 600mAh About 50h, (without printing and backlight) 2~3.5 hours 90% mm 530 g (including Impact Device and printer) 5 Main unit 1 Impact device type D 1 Test block HLD 1 Charger 1 Table support for main unit1 Connecting cable 1 Printing paper Special Impact Devices (See page 8) Dataview software Dataview for TH140

6 LEEB HARDNESS TESTER HLN-11A ISO 9001 Wide measuring range, for all metallic materials Direct display of hardness scales HRB, HRC,,,HS, HL Conversion to tensile strength (U.T.S.) Test at any angle, even upside down Removable printer included Six Impact Devices are available for special applications Large LCD display showing all functions and parameters Battery low indication charging indication on the keyboard by LED Fault indication in details (E1-E5) Hardness scales Measuring range Tensile strength U.T.S range Standard impact Device Optional Impact Devices Min. Radius of workpiece (convex / concave) Max. Workpiece Hardness Min. workpiece weight Min. Workpiece thickness Min. Thickness of hardened layers Charging time Continuous working time Humidity Dimensions HL, HRC, HRB,,, HS 374~1999 MPa D DC/D+15/G/C/DL (See page 8) Rmin=50mm (with support ring Rmin=10mm) Rechargeable NiMH batteries 5 3 hours 1.2V 600mAh About 50h (without printing and backlight) 90% mm 615g (including impact device and printer) Main unit 1 Impact Device type D 1 Test block HLD 1 Charger 1 Table support for main unit 1 Printing paper Special Impact Devices (See page 8) 6

7 LEEB HARDNESS TESTER Table 1: measuring range of TIME Leeb hardness tester Material Hardness scale D/DC D+15 Impace device C G E DL HRC HRB Steel and cast steel HRA HS Steel CWT, ST HRC HRB Stainless steel HRC GC,IRON HRC NC,IRON C,ALUM HRB BRASS HRB BRONZE COPPER Table 2: and repeatability No. Impact device Standard test block values Repeatability D DC DL HLD HLD HLDC HLDC HLDL HLDL 6HLD 10HLD 6HLDC 10HLDC 12HLDL 6HLD 10HLD 6HLDC 10HLDC 12HLDL 4 D HLD HLD+15 12HLD+15 12HLD+15 5 G HLG HLG 12HLG 12HLG 6 C HLC HLC 12HLC 12HLC 7

8 LEEB HARDNESS TESTER ISO 9001 Technical specification of impact devices D DC DL C D+15 G Technical specification Impact device Impacting energy Mass of impact body Hardness of spherical test tip Diameter of spherical test tip Material of spherical test tip Diameter of impact device Length of impact device of impact device Max. hardness of workpiece Surface roughness of workpiece Min. weight of workpiece Direct measurement Needing stable support Needing compact coupling Min. thickness of workpiece with compact coupling Min. thickness of hardened layer Size of impact indentation Hardness Indentation diameter 300 Indentation depth Hardness Indentation diameter 600 Indentation depth Hardness Indentation diameter 800 Indentation depth Application guide of impact devices D/DC/DL 11mJ 5.5g/5.5g/7.2g mm Tungsten carbide 20/20/6mm 147/86/202mm 75/50/60g 940/940/ >5kg 2~5kg 0.05~2kg 0.54mm mm D type for general purpose, DC type for inner face of holes or small spaces, DL type for long and narrow channel or holes D+15 11mJ 7.8g mm Tungsten carbide 20mm 162mm 80g >5kg 2~5kg 0.05~2kg 0.54mm mm D+15 type for grooves or concave C 2.7mJ 3.0g mm Tungsten carbide 20mm 141mm 75g >1.5kg 0.5~1.5kg 0.02~0.5kg 1mm 0.2mm 0.38mm mm C type for small or light workpieces and surface hardener layer G 90mJ 20g 1600 Tungsten carbide 30mm g >15kg 5~15kg 0.5~5kg 10mm 1.2mm 1.03mm mm G type for big and heavy workpieces with rough surface 8

9 LEEB HARDNESS TESTER Optional Support Rings Function: they are used for tested surface whose curvature radius is less than 30mm (D, DC, D+15, C impact devices) or less than 50mm (G impact device). UN Z HZ K HK Support Rings No. Type Sketch of non-conventional supporting ring Remarks 1 Z10-15 For testing cylindrical outside surface R10 R15 2 Z For testing cylindrical outside surface R14.5 R30 3 Z25-50 For testing cylindrical outside surface R25 R50 4 HZ11-13 For testing cylindrical inside surface R11 R13 5 HZ For testing cylindrical inside surface R12.5 R17 6 HZ For testing cylindrical inside surface R16.5 R30 7 K10-15 For testing spherical outside surface SR10 SR15 8 K For testing spherical outside surface SR14.5 SR30 9 HK11-13 For testing spherical inside surface SR11 SR13 10 HK For testing spherical inside surface SR12.5 SR17 11 HK For testing spherical inside surface SR16.5 SR30 12 UN For testing cylindrical outside surface, radius adjustable R10 9