RMF TANDEM 900 OFF-LINE FILTER SYSTEMS

Transcription

1 RMF TANDEM 900 OFF-LINE FILTER SYSTEMS RMF Tandem 900 Off-line filter Systems can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated pump-motor unit draws fluid out of the tank, filters it and pumps clean oil back into he system. RMF Tandem Off-line filters can continue to work even when the main system is not in use. Element change can also be done without interfering with the main system. The standard range offers filter units for reservoirs with a capacity of up to 20,000 litres. Choices of electrical are available to suit all industrial requirements and a large selection of filter elements makes it possible to customize the unit to every specific application. If required pre-filters can fitted to every type. The RMF Tandem 900 Off-line filter units are very simple to install. RMF Tandem filters are characterized by their extremely efficient filter elements with 25 micron first prefilter after then 10 micron second prefilter and a fineness of 3 micron all in one element. If required different micron sizes are available to suit any specific application. RMF Tandem 900 filters are characterized by their extremely efficient filter elements in first Water Absorbing second 10 micron prefilter and a fineness of 3 micron all in one element. The RMF Tandem 900 filters can also be equipped with special water absorbing prefilters in case of extreme water contamination. RMF Tandem 900-Aqua filters are characterized by their extremely efficient filter elements The RMF Tandem 900-Aqua filters can also be equipped with special water absorbing filters in case of extreme water contamination. RMF TANDEM 900 ECONOMICAL The hydraulic market accepts that 80% of mechanical failures are caused by contamination in the system. The RMF Tandem 900 filters attack this contamination at source and in addition to solid particles. These filters are also capable of removing water from the oil. This prevents the catalytic reaction of water and solid particle contamination, resulting in extended useable oil life. The use of RMF Tandem 900 filters means less defects, less maintenance, and less wear and tear of the hydraulic components.

2 RMF TANDEM 900 ADVANTAGES Less malfunctions The tolerances between moving parts in servo valves and proportional valves are constantly reducing. The result is that even the smallest amounts of silt can cause damage to the system. RMF Tandem 900 filters remove this silt. Protection of expensive main stream filters RMF Tandem 900 filters are applied in Off-line configurations and constantly clean the oil from the reservoir. The oil which reaches the main stream filter is therefore cleaner and allows longer usage life of this expensive filter. The main stream filter then acts primarily as an emergency filter. Less frequent oil changes Increasingly strict environmental laws in the area of oil changes, oil storage and the disposal of used oil lead to corresponding cost increases. RMF Tandem 900 filters mean less oil changes, and therefore less costs. Extended usable life of the oil Frequent oil changes are generally the result of chemical deterioration of the oil caused by the oil oxidation process. This process is brought into action by the presence of silt. If water is also present, this acts as a catalyst and the oxidation process is accelerated. RMF Tandem 900 filters remove silt AND water from the oil. Less machine down time Reduction of defects caused by worn components and less frequent oil changes mean an increase in production time. RMF TANDEM 900 CHARACTERISTICS The oil filters have: - a filter fineness in the range of 1 25 μ; - large particle collection capacity; - high filtration capacity due to depth effect; - large water absorption capacity; - a full range of filter elements.

3 RMF Systems filters: - do not adversely affect viscosity or additives; - do not remove additives; - reduce the oxidation process; - reduce the forming of acids; - SAVE COSTS. Measuring points To facilitate quality control of the oil, the RMF Tandem 900 oil filters are equipped with two quick connect measuring points to which a particle counter can be attached. This offers the possibility of measuring the oil cleanliness level on-site and under working conditions. The measuring points also allow oil samples to be drawn for external analysis. The solution RMF Industrial Products inc. offer the most complete and efficient filter series available today. RMF Industrial Products inc.is THE solution to your contamination problems: simple to fit, equipped with extremely efficient filters and offering the opportunity for simple control of oil cleanliness. RMF TANDEM 900 APPLICATIONS RMF Off-line filter units can be fitted to every imaginable industrial application where hydraulic and/or lubrication systems are present, a large selection in electrical motors is available, ranging from single phase, three phase to explosion proof. In recent years RMF Industrial Products have developed a great deal of experience in cleaning and keeping clean hydraulic and lubrication systems in the: - steel industry; - plastic moulding industry; - maritime industry; - petro chemical industry; - paper industry -millitary industry - enerji industry mining industry

4 RMF TANDEM 900 ADVANTAGES Extremely clean oil due to high filtration efficiency. Prevention of channel forming by radial filtration direction. Increased flow capacity. Large dirt holding capacity. Large water holding capacity. Compact and easy-maintenance design. Environmentally friendly elements available. Longer usage life for oil and components. Reduces cost of ownership.teknik Özellikler

5 Filter model RMF Tandem 900 RMF Tadem RMF Tandem 900-Aqua No. of filter housings Material filter housing 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel Seal material filter unit Buna-N standard Buna-N standard Buna-N standard Nominal flow 50 l/min up to 150l/min 50 l/min up to 150l/min 50 l/min up to 150l/min By-pass opening pressure 6 bar 6 bar 6 bar No. of filter elements Length filter elements 900 mm x 200mm (standard) 900 mm x 200 mm (standard) 900 mm x 200 mm (standard) Max. pressure filter housing 10 Bar 10 Bar 10 Bar Max. oil temperature 100 C 100 C 100 C Dirt indicator Pressure gauge ( red / green ) ( red / green ) ( red / green ) Gauge glycerine filles Connection pump suction port 1 BSP female 1 BSP female 1 BSP female Diameter hose suction side Connection return port Diameter hose return side Minimum overhead clearance 1000 mm 1000 mm 1000 mm for element removal Pump type Hydraulic gear pump Power supply E-motor Various electrical power supplies possible Max. tank volume ± l ± l ± l D.H.C gr 2 Bar 3000 gr at 2 Bar Waterabsorbing Kapasite 4000 ml ml

6 RMF Tandem 900 Filter Element Befor RMF Tandem 900 Special High Flow Filter System RMF Tandem 900 Housing l / min 10 pieces of RMF Tandem 900 inside After RMF Tandem 900 RMF Tandem 900-Aqua