Dimensional drawing. Connection type IME08-1B5NOZT0S IME08-1B5NSZT0S IME08-1B5POZT0S IME08-1B5PSZT0S. 3 x 0.14 mm². brn. L+ Schließer/ Öffner M.
|
|
|
- Clyde Robertson
- 7 years ago
- Views:
Transcription
1 Inductive sensor, IE series, IE08, DC-wire, Standard series, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 50 4 Enclosure rating IP 67 Installation flush 4 8x 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-B5NO IE08-B5NS IE08-B5PO IE08-B5PS IE08-B5NO IE08-B5NS IE08-B5PO IE08-B5PS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 SICK
2 IE08 Technical specifications IE08- B5NO B5NO B5NS B5NS B5PO B5PO B5PS B5PS Sensing range S n.5 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-B5NO IE08-B5NO IE08-B5NS IE08-B5NS IE08-B5PO IE08-B5PO IE08-B5PS IE08-B5PS SICK
3 Inductive sensor, IE series, IE08, DC-wire, Standard series, Non-flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- 0 plated with fine thread 8 x mm Enclosure rating IP Installation non-flush 0 8x 4 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-N5NO IE08-N5NS IE08-N5PO IE08-N5PS IE08-N5NO IE08-N5NS IE08-N5PO IE08-N5PS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 SICK
4 IE08 Technical specifications IE08- N5N O N5NO N5NS N5NS N5PO N5PO N5PS N5PS Sensing range S n.5 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-N5NO IE08-N5NO IE08-N5NS IE08-N5NS IE08-N5PO IE08-N5PO IE08-N5PS IE08-N5PS SICK 4
5 Inductive sensor, IE series, IE08, DC-wire, Short version, Flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 4 5 Enclosure rating IP 67 Installation flush 5 8x 4 Connection Display LED Fastening nuts ( x); width across, metal IE08-B5NO IE08-B5NS IE08-B5PO IE08-B5PS IE08-B5NO IE08-B5NS IE08-B5PO IE08-B5PS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 5 SICK
6 IE08 Technical specifications IE08- B5NO B5NO B5NS B5NS B5PO B5PO B5PS B5PS Sensing range S n.5 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-B5NO IE08-B5NO IE08-B5NS IE08-B5NS IE08-B5PO IE08-B5PO IE08-B5PS IE08-B5PS SICK 6
7 Inductive sensor, IE series, IE08, DC-wire, Short version, Non-flush Inductive sensor Sensing range.5 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- plated with fine thread 8 x mm Enclosure rating IP Installation non-flush 8x 4 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-N5NO IE08-N5NS IE08-N5PO IE08-N5PS IE08-N5NO IE08-N5NS IE08-N5PO IE08-N5PS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 7 SICK
8 IE08 Technical specifications IE08- N5N O N5NO N5NS N5NS N5PO N5PO N5PS N5PS Sensing range S n.5 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-N5NO IE08-N5NO IE08-N5NS IE08-N5NS IE08-N5PO IE08-N5PO IE08-N5PS IE08-N5PS SICK 8
9 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Quasi-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 50 4 Enclosure rating IP 67 Installation quasi-flush 4 8x 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-0BNO IE08-0BNS IE08-0BPO IE08-0BPS IE08-0BNO IE08-0BNS IE08-0BPO IE08-0BPS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 9 SICK
10 IE08 Technical specifications IE08-0BNO 0BNO 0BNS 0BNS 0BPO 0BPO 0BPS 0BPS Sensing range S n mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Quasi-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-0BNO IE08-0BNO IE08-0BNS IE08-0BNS IE08-0BPO IE08-0BPO IE08-0BPS IE08-0BPS SICK 0
11 Inductive sensor, IE series, IE08, DC-wire, Advanced series, Non-flush Inductive sensor Sensing range 4 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- 0 plated with fine thread 8 x mm Enclosure rating IP Installation non-flush 0 8x 4 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-04NNO IE08-04NNS IE08-04NPO IE08-04NPS IE08-04NNO IE08-04NNS IE08-04NPO IE08-04NPS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 SICK
12 IE08 Technical specifications IE08-04NN O 04NNO 04NNS 04NNS 04NPO 04NPO 04NPS 04NPS Sensing range S n 4 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-04NNO IE08-04NNO IE08-04NNS IE08-04NNS IE08-04NPO IE08-04NPO IE08-04NPS IE08-04NPS SICK
13 Inductive sensor, IE series, IE08, DC-wire, Advanced short series, Quasi-flush Inductive sensor Sensing range mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickelplated with fine thread 8 x mm 4 5 Enclosure rating IP 67 Installation quasi-flush 5 8x 4 Connection Display LED Fastening nuts ( x); width across, metal IE08-0BNO IE08-0BNS IE08-0BPO IE08-0BPS IE08-0BNO IE08-0BNS IE08-0BPO IE08-0BPS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 SICK
14 IE08 Technical specifications IE08-0BNO 0BNO 0BNS 0BNS 0BPO 0BPO 0BPS 0BPS Sensing range S n mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Quasi-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-0BNO IE08-0BNO IE08-0BNS IE08-0BNS IE08-0BPO IE08-0BPO IE08-0BPS IE08-0BPS SICK 4
15 Inductive sensor, IE series, IE08, DC-wire, Advanced short series, Non-flush Inductive sensor Sensing range 4 mm Short-circuit protection (pulsed) Dimensional drawing 8x Robust brass housing, nickel- plated with fine thread 8 x mm Enclosure rating IP Installation non-flush 8x 4 5 Connection Display LED Fastening nuts ( x); width across, metal IE08-04NNO IE08-04NNS IE08-04NPO IE08-04NPS IE08-04NNO IE08-04NNS IE08-04NPO IE08-04NPS Accessories Connector, 8, -pin 8, -pin x 0.4 mm² 4 5 SICK
16 IE08 Technical specifications IE08-04NN O 04NNO 04NNS 04NNS 04NPO 04NPO 04NPS 04NPS Sensing range S n 4 mm Electrical configuration DC -wire Supply voltage V s DC V Ripple U pp 0 % Voltage drop U d V ) Power consumption 0 ma ) Continuous current I a 00 ma Time delay before availability t v 00 ms Hysteresis H, of s r % Repeatability R % (U b and T a constant) ) Temperature drift, of s r ± 0 % EC According to EN Switching output NPN PNP Output function Normally closed Normally open Installation Non-flush Connector, 8, -pin Cable, PVC, m Enclosure rating IP 67 4) ax. switching frequency 500 Hz Dimensions 8 x 5) Short-circuit protection Reverse polarity protection Power-up pulse suppression Shock/vibration stress 0 g, ms/ Hz, mm Ambient temperature T a -0 C C Housing material Brass nickel-plated, plastic Tightening torque 6 Nm ) at I a max ) without load ) of s r 4) according to EN ) Thread diameter x pitch (mm) (pulsed) Reduction factor R The following are reference values, which may vary from type to type: St7 (Fe) Stainless steal (VA) Approx. 0.8 Aluminum (solid) Approx Copper (Cu) Approx. 0.4 Ordering information Type Part Number IE08-04NNO IE08-04NNO IE08-04NNS IE08-04NNS IE08-04NPO IE08-04NPO IE08-04NPS IE08-04NPS SICK 6
Inductive proximity sensors IM 12 series, sensing range 2 / 4 mm DC 3-wire, metal housing
Inductive proximity sensors IM series, sensing range / mm wire, metal housing Mx, 60 Dimensions in mm Mx 5 5 50 0, 60 Standard series Features Can be installed flush or nonflush in metal or output Normally
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30
Proximity Sensors Inductive Thermoplastic Polyester Housing Types EI, DC, M 12, M 18, M 30 Euronorm thermoplastic polyester housing, cylindrical Diameter: M 12, M 18, M 30. Sensing distance: 2 to 15 mm
Laser diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049
W150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
Inductive sensors. Compact, fast, reliable. Edition 2013
Inductive sensors. Compact, fast, reliable. Edition 2013 Indispensable in all machines Non-contacting, inductive proximity sensors play a major role in automation technology all over the world. For several
Magnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
W 36: Mastering complex tasks reliably
Lichtschranken W Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches W : astering complex tasks reliably Through-beam photoelectric switches for temperatures
Ordering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
Technical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 8 mm
Model Number Features Increased operating distance 8 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications
Digital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
Capacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Invative all-rounders. Capacitive sensors can detect metallic,
OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS
OPERATING PRINCIPLES FOR PHOTOELECTRIC SENSORS Photoelectric These sensors use light sensitive elements to detect objects and are made up of an emitter (light source) and a receiver. Four types of photoelectric
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Technical Data. Dimensions
0102 Model Number Features Comfort series 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Cross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
Ordering Information. Short Barrel Inductive Prox E2E3-WIREDC. Short Barrel 3-Wire Prox Sensors Meet IP67
R Short Barrel Inductive Prox E2E3-WIREDC Short Barrel 3-Wire Prox Sensors Meet IP67 H Thick nickel-plated brass barrel has wrench flats for easy installation H Solid potted internal circuitry withstands
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
Color Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
sensors Miniature Sensors - S100 The universal miniature photoelectric sensor
Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and
Photoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
Table of Contents, Magnetic Field Sensors. Introduction to Magnetic Field Sensors... 380
Proximity Switches Table of Contents, Magnetic Field Sensors Proximity Sensors.3 Magnetic Field Sensors.2.3 Introduction to Magnetic Field Sensors... 380 Operating Distance and Responsiveness Mounting
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
Operating instructions Capacitive sensors
Operating instructions Capacitive sensors UK 700 / 00 0 / 009 Contents Safety instructions Functions and features Installation. Notes on flush and non-flush installation Electrical connection. Wiring.
Conductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
intelligent solutions
Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology
OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
Online data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
W 260: Standard photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic Photoelectric reflex switches W 0: Standard photoelectric switch series for a broad range of
E2EL Ø 6,5 M8 / Plug M8 M8 / Plug M12 E2EL
High Frequency Inductive Proximity Sensor Increased response frequency for high speed applications Max 5 khz, switching frequency M8 or dia 6.5 mm housing Brass or stainless steel housing Ordering Information
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011
, 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.
BOS 73K... BOS 74K...
BFB/BOS When there s no space for a photoelectric sensor, there is only one solution: user fiber optics! If there are no particular demands for toughness an ambient temperature or chemical resistance,
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
W 2: Subminiature photoelectric switch series: extremely small and extremely strong
Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches Through-beam photoelectric switches W : Subminiature photoelectric switch series:
E2FM. Inductive Proximity Sensor in full metal housing. Application. Continuous Impact Test. Brush Test
Inductive Proximity Sensor in full metal housing Full body stainless steel housing for highest mechanical protection Low frequency modulation for metal chip immunity Flame retardant cable for high protection
LUT Luminescence scanners: Seeing what no-one else can
LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.
Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
Inductive Proximity Sensors
M12 Inductive Proximity Sensors Standard Length Mini's Extended Sensing 3 Wire DC 2 Wire DC 2 Wire AC (Wiring Schematic) 3 Wire DC PNP Normally Open (1) IMM32122C IMM35124C IMN32122C IMN35124C IMN32122M12
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
Capacitive sensors. Versatile, contactless, durable Edition 2012/2013
Capacitive sensors Versatile, contactless, durable Edition 2012/2013 With capacitive sensors from Baumer you can complete almost any task. Visibly better: Baumer sensors. The Baumer Group is an internationally
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
Thru-Beam 80 to 320 mm 0.05 to 0.08 mm
Series 7069A Fiber Optics The 7069A coupled with the appropriate cable forms a fiber optic sensor controller system capable of detecting objects as small as 0.01mm dia. and color marks on backgrounds of
Part number NPN E2EM-X2C1 E2EM-X2C2 PNP E2EM-X2B1 E2EM-X2B2 NPN E2EM-X4C1 E2EM-X4C2 PNP E2EM-X4B1 E2EM-X4B2
R Extended Range Inductive Prox Greater Sensing Distance Offers Greater Design Flexibility H Sensing distances approximately 1.5 to 2 times larger than that of any conventional Sensor H Reduces problems
SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
photoelectric highlights www.automation.datalogic.com
photoelectric miniature sensors S8 series The new S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The
technical data (according to IEC 60947-5-2)
Photoelectric sensors: Series 3#30 & 3#31 ü Complete miniature sensor series mm in rugged Crastin housings ü Shock & vibration resistant due to fully vacuum-potted electronics ü Diffuse sensors with precise
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
crm+130/iu/tc/e Extract from our online catalogue: Current to: 2016-04-21
Extract from our online catalogue: crm+130/iu/tc/e Current to: 2016-04-21 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
Sensing method Appearance a Connection o method Sensing distance Model NPN output PNP output Through-beam Pre-wired (see note 3) Connector.
Photoelectric Sensor with Built-in Amplifier Photoelectric Sensor with built-in amplifier is applicable to a wide variety of lines and ensures a longer sensing distance than any other model. User-friendly
Fast, reliable, ultra-precise. My-Com precision switches.
Fast, reliable, ultra-precise.. Unrivaled 1 μm repeat accuracy Setting reference points, monitoring tolerances, controlling, adjusting. Fast, reliable, ultra-precise. Uncompromising accuracy tried and
U-shaped Micro Photoelectric Sensor
SERIES U-shaped Micro Photoelectric Extremely small size enables space saving and quick installation! Extremely small Ultra-small type PM- 24(-R) contributes to the miniaturization of your equipment. Even
How To Make An Ultrasonic Sensor
crm+ ultrasonic sensors Microsonic : TR Electronic: Tel: +49 231 975151-0 USA: 248-244-2280 Fax: +49 231 975151-51 Canada: 519-452-1233 www.microsonic.de www.trelectronic.com info@microsonic.de Description
Adjustment functions for both span and shift have been incorporated
SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8
Small U-shaped Micro Photoelectric Sensor. Enables space saving and quick installation!
4 Small Micro Photoelectric Amplifier Built-in PM-44 SERIES PM-4 SERIES General terms and conditions... F- selection guide... P.44~ Related Information Glossary of terms / General precautions... P.39~
W 27-2: The photoelectric switch series with expanded possibilities
W - Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W -: The photoelectric switch series with expanded possibilities metres
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
Introduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!
Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be
96 Variants. The GlobalProx range increases in popularity. 12 PNP Normally-open 12 PNP Normally-closed 12 NPN Normally-open 12 NPN Normally-closed
BCS00K9 BCS00LK BCS00LL BCS00LM BCS00LN BCS00LP BCS00LR BCS00LT BCS00LU BCS00LW BCS00LY BCS00LZ BCS00M0 BCS00M1 BCS00M2 BCS00M3 BCS00M4 BCS00M5 BCS00M6 BCS00M7 BCS00M8 BCS00M9 BCS00MA BCS00MC BCS00ME BCS00MF
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
Technical Data. Dimensions
0102 Model Number Features 15 mm quasi flush Usable up to SIL2 acc. to IEC 61508 Accessories BF 30 Mounting flange, 30 mm V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable V1-W-N-2M-PUR Female
Technical Data. General specifications Switching element function Rated operating distance s n 15 mm
0102 Model Number Features Comfort series 15 mm flush Accessories MHW 01 Modular mounting bracket MH 04-2057B Mounting aid for VariKont and +U1+ Technical Data General specifications Switching element
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
Technical Data. General specifications Switching element function Rated operating distance s n 5 mm
0102 Model Number Features 5 mm non-flush Usable up to SIL 2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 5 mm Installation non-flush
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
Electronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
Technical Data. General specifications Switching element function Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
New XUY roller sensors
Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors
Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications
Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
crm+25/d/tc/e Extract from our online catalogue: Current to: 2015-10-26
Extract from our online catalogue: crm+25/d/tc/e Current to: 2015-10-26 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de
PM SERIES. Extremely small size enables space saving and quick installation! U-shaped Micro Photoelectric Sensor. Extremely small
EQ-00 VF NX MS-AJ RT-0 PX- CY PHOTOELECTRIC SENSORS Mounting Stand SERIES U-shaped Micro Photoelectric PNP output type available Extremely small Ultra-small type -4(-R) contributes to the miniaturization
How To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Temperature monitoring (PTC) Supply voltage 208-480 V AC Supply circuit = measuring circuit 2 change-over contacts Width 45 mm Control
MONITORING RELAYS. w VOLTAGE MONITORING RELAY UR5U1011. w SCHRACK-INFO. w TECHNICAL DATA
w VOLTAGE MONITORING RELAY UR5U1011 w SCHRACK-INFO AC/DC voltage monitoring in 1-phase mains Undervoltage monitoring 1 change over contact Width 17.5 mm Installation design w TECHNICAL DATA 502 1. Functions
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
Operating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004
Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical
W 18-3: Incorporated application Know-how, expanded functionality, high level of equipment availability
Photoelectric proximity switches, FGS Photoelectric reflex switches Through-beam photoelectric switches W -: Incorporated application Know-how, expanded functionality, high level of equipment availability
W 160: Miniature series for optimum solutions
W 0 Photoelectric switches Photoelectric proximity switches, BGB Photoelectric proximity switches, energetic W 0: iniature series for optimum solutions Photoelectric reflex switches Through-beam photoelectric
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
E3Z. Ordering Information. Photoelectric Sensor with Built-in Amplifier. Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity
Photoelectric Sensor with Built-in Amplifier Compact Sensor Offers Long Sensing Distance and Superior Noise-Immunity H Photo-IC provides long sensing distance: 15 m for through-beam, 4 m for retroreflective,
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
Photoelectric sensors V180-2, Photoelectric retro-reflective sensor, Standard optics
ONLINE DATA SHEET www.mysick.com Photoelectric sensors V180-2, Photoelectric retro-reflective sensor, Standard optics VL180-2P42436 Photoelectric sensors V180-2, Photoelectric retro-reflective sensor,
CONFIGURABLE SAFETY RELAYS
MSI-s/R, MSI-sx/Rx Configurable MSI provide important functions for the efficient flow of automated production processes Special features Combined guarding types by connecting up to 4 AOPDs Additional
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection