Link-5 VHF. User Guide ENGLISH. lowrance.com

Transcription

1 Link-5 VHF User Guide ENGLISH lowrance.com

2 Copyright 2012 Navico All rights reserved. Lowrance is a registered trademark of Navico No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice. All screens in this manual are simulated. For free owner s manuals and the most current information on this product, its operation and accessories, visit our web site: Important safety information Please read carefully before installation and use. DANGER WARNING CAUTION CAUTION This is the safety alert symbol. It is used to alert you to potential personal injury hazards, Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

3 Section 1 - General Information Features Customizing your Lowrance VHF Radio How to Display and Navigate Menus How to Enter Alphanumeric Data LCD Symbols and Meanings Basic Operation and Key Functions...9 Section 2 - The Radio Menu (MENU) Radio Menu Options (Menu) Maintain Your Buddy List (BUDDY LIST) Add an Entry Edit an Entry Delete an Entry Local or Distance Sensitivity (LOCAL/DIST) Set DISTANT Sensitivity Set LOCAL Sensitivity Backlighting (BACKLIGHT) and Contrast (CONTRAST) Set the Backlighting Level Set the Contrast Level GPS Data and Time (GPS/DATA) Manually Enter Position and UTC Time (MANUAL) Local Time (TIME OFFSET) Time Format Options (TIME FORMAT) Time Display Options (TIME DISPLAY) Position Display Options (LL display) Course & Speed Display Options (COG/SOG) GPS Alert Options (ALERT) GPS Simulator (SIMULATOR) Reset to Factory Defaults (RESET) Section 3 - Radio Setup Menu (RADIO SETUP) Radio Setup Menu (RADIO SETUP) Channel (UIC) Channel Names (CH NAME) RING & BEEP Volume (RING VOLUME) and (KEY BEEP) Internal Speaker Connections (INT SPEAKER) Set the Priority Channel (WATCH MODE) Weather Alert (Wx ALERT) NMEA protocol (COM PORT) Lowrance - Link-5 Operation and Installation Instructions 3

4 Section 4 - DSC Setup Menu (DSC SETUP) DSC Setup - Menu Options Enter or View Your USER MMSI (USER MMSI) Enter your MMSI View your MMSI Maintain Your Groups (GROUP SETUP) Create a Group (GROUP SETUP) Edit Group Name Details Delete a Group Response to Individual Calls (INDIV REPLY) ATIS MMSI & ATIS Functionality Enter or Edit YOUR ATIS MMSI View your ATIS MMSI Enable ATIS Functionality (ATIS FUNC) DSC functionality options (DSC FUNC) Response Type to LL Polling Calls (LL REPLY) Automatic Channel switching (AUTO SWITCH) DSC Test Reply (TEST REPLY) Set the inactivity timer (TIMEOUT) Section 5 - Sending and Receiving DSC Calls What is DSC? Sending DSC calls Make a Routine Call (INDIVIDUAL) Retrying a Routine Call Acknowledgement of an Individual Incoming Call (INDIV) Recall the Most Recent Incoming Call (LAST CALL) Call a Group (GROUP) Call All Ships (ALL SHIPS) Call using the Call Log (CALL LOG) Call using the Distress Log (DISTR LOG) Call using the Sent Call Log (SENT CALL) Request the LL Position of a Buddy (LL REQUEST) Make a DSC test call (DSC TEST) Receiving DSC Calls Receiving an All Ships Call (ALL SHIPS) Receiving an Individual Call (INDIV) Receiving a Group Call (GROUP) Receiving a Geographic Call (GEOGRAPH) Receiving a Polled Position Call (POSITION) Lowrance - Link-5 Operation and Installation Instructions

5 Section 6 - Distress Calls Sending a Distress Call Receiving a Distress Call (DISTRESS!) Distress Acknowledgement (DISTRESS ACK) Distress Relay Individual (INDIV DISTR RELAY) Section 7 - Installation...45 Installation Options Location Requirements Checklist Gimbal Installation Change the Viewing Angle Recessed Installation Install the Microphone Bulkhead Mount Fix the DSC label Connect the Radio Cables Set Up the Radio Enter Your User MMSI The Completed Installation Appendix A - Technical Specifications...52 Appendix B - Troubleshooting...54 Appendix C - US & ROW VHF Marine Channel Charts...55 C-1 International Channel Chart Special Notes on International Channel Usage...56 C-2 USA Channel Chart Special Notes on USA Channel Usage...58 C-3 CANADA Channel Chart Special Notes on Canada Channel Usage...60 C-4 US & Canada WEATHER Channels Appendix D - EU VHF Marine Channel Charts...62 D-1 EU International Channel Chart Special Notes on EU International Channel Usage...63 D-2 Inland Waterways Country Specific table - ATIS ON D-3 Special Channels Appendix E - MMSI, FCC and License Information...68 FCC Compliance...68 Lowrance - Link-5 Operation and Installation Instructions 5

6 Section 1 - General Information 1-1 Features Congratulations on your purchase of this Lowrance Link-5 marine band VHF radio. Your Link-5 provides the following useful features: Prominent channel display Adjustable contrast settings for the LCD Adjustable keypad backlighting for easy night-time use Waterproof and submersible to comply with JIS-7 GPS latitude and longitude (LL) and time display (when connected to a GPS) Choice of High or Low (25 W or 1 W) transmission power 6 key handset mic with built-in speaker Powerful 4 W external audio output Access to all currently-available marine VHF channel banks (USA, Canada, International) including weather channels where available (model dependant) Special CH16/9 key for quick access to the priority (international distress) channel Special 3CH key to select your three favourite channels Dedicated Wx (Weather) key PSCAN (similar to dual watch) facility DSC (Digital Select Calling) capability that meets Global DSC Class D Standards Separate CH70 receiver included built in DISTRESS call button to automatically transmit the MMSI and position until an acknowledgement is received Easy access to a buddy list of up to 20 favourite people MMSI storage for three favourite groups Group Call and All Ships Call facility LL position polling information Weather alert facility where available (US models) ATIS facility for inland waterways (EU models) With DSC Auto-Switch disable and DSC Test function 6 Lowrance - Link-5 Operation and Installation Instructions

7 1-2 Customizing your Lowrance VHF Radio You can customize the radio to suit your individual preferences. Some preferences can be set directly through the keys as explained in this Section. Other preferences are set up through the built-in menus and these are explained in the other Sections. You can check the software version of the radio and the User MMSI each time the radio is turned on, the screen will display the software version and the USER MMSI if one is programmed into the radio. 1-3 How to Display and Navigate Menus 1. Press MENU (or CALL). Note that only four menu items can be displayed at any one time on the screen. 2. Some line items may show an or indicator. This means there is more information available to show. Scroll (rotate the Rotary knob, or use + / - keys on the hand mic) to scroll up and down the menu until the cursor is positioned at the desired option. Press ENT (press the Push To Select) to display that option. 3. Make any entries or changes as explained in the following section. 4. Press ENT to confirm changes. Otherwise, press EXIT to keep the original entry. 5. Press EXIT to backup one screen (this key is equivalent to an ESC function on a PC). 1-4 How to Enter Alphanumeric Data If your radio does not have the optional alphanumeric microphone, you can Rotate the Rotary knob, or use + / - keys on the microphone key to enter alphanumeric data. Press - to count through numbers, or hold down to scroll rapidly to the desired number. Press + to step through the alphabet, or hold down to scroll rapidly to the desired character. If you make an error, press - until < is displayed, then press ENT to backup and correct the entry. 1-5 LCD Symbols and Meanings Link-5 LCD showing all segments: Typical Link-5 startup screen: LINK5 AUS/NZ VER:V1.999 DSC IS ON ID: Lowrance - Link-5 Operation and Installation Instructions 7

8 This simulation shows the locations of all the following information symbols: Symbol TX Meaning Transmitting. HI LO Transmission power. High (HI) 25W or Low (LO) 1W. WX WX ALT BUSY PRI D LOCAL DSC USA INT CAN X B A CH1 CH2 CH3 ATIS A typical display: Weather channel. Weather Alert. Alarm beeps will sound (US models only). Receiver busy with an incoming signal. Priority channel is selected. Duplex operation. Otherwise, blank for Simplex operation. Local calling is selected. Otherwise, blank for distance calling. DSC capability is available. Incoming DSC call. Low Battery warning (activates at 10.5 V). Channel selected. Selected channel bank for VHF radio operations and regulations. DSC Auto channel switch function is disabled (OFF) (see section 4-8) Channel suffix, if applicable. Shows which of the 3 favourite channels, if any, are selected. Otherwise blank. EU models only - must be enabled when in European inland waterways. The latitude and longitude of the vessel and the local time are shown. A transmission on Channel 16 is being made at high power The International channel bank is loaded. Channel 16 is set as the Priority channel. It is also set as favourite channel 1. DSC functionality is enabled. There is an incoming DSC call so the receiver is busy. 8 Lowrance - Link-5 Operation and Installation Instructions

9 1-6 Basic Operation and Key Functions All possible keys and their functions are listed here. Note that some of the keys may not be available depending on your Lowrance VHF radio model. 6 Key handset mic Link-5 base station radio Key: VOL/PWR SQL Function: Volume and Power. Turn clockwise to power on. Continue to turn until a comfortable volume is reached. VOL/PWR will also adjust the settings of an external speaker, if connected. Squelch or Threshold Level. Sets the threshold level for the minimum receiver signal. Turn fully counterclockwise until random noise is heard, then turn slowly clockwise until the random noise disappears. Make another 1/4 turn clockwise for best reception in open sea conditions. In areas of high noise (eg. close to large cities) reception may improve if sensitivity is reduced. Either turn SQL slowly clockwise or use the LOCAL setting. See section / 9 Priority Channel. Also on the handset mic. Press to cancel all other modes and to tune into the priority channel. Press again to return to your original channel. The default Priority Channel is CH16. DISTRESS PTT For US models: To make Channel 09 the priority channel, hold down 16/9 until a beep sounds and 09 is displayed. Send a DSC Distress Call. DSC must be active and an MMSI must be programmed. See Section 6. Press To Talk. (Located on the handset mic). Press PTT to transmit at any time on an allowable channel. This automatically exits you from menu mode and stops scanning. You must release PTT to receive a signal. If PTT sticks, a built-in timer will automatically shut down a transmission after five Lowrance - Link-5 Operation and Installation Instructions 9

10 PUSH TO SELECT ACCEPT OPT ACK EXIT QUIT CALL RESEND MENU WX INFO 3CH 10 minutes and sound a short error beep. Enter (ENT). Use ENT when navigating menus, to confirm entries and edits. Received DSC Call mode: Press to change immediately to the requested channel Received Individual Call mode: Press to view any incoming individual call reply options Send DISTRESS Call mode: Press to view and select any available options Receive Individual Call, LL Request, DSC Test Call, or Distress relay (US only) mode: Press to acknowledge an incoming call when an ACK is requested Escape (ESC). Use EXIT when navigating menus, to clear incorrect entries, to exit from a menu without saving changes, and to back up to the previous screen. DSC Call mode only: Press to return to the previous screen DSC Call Menu. Press to enter the DSC Call Menu and make DSC calls. See Section 6. DISTRESS CALL mode only: Press to resend a distress alert again Radio and DSC Setup Menu. Press to enter the DSC Setup Menu and to customize your radio. See Section 2-5. Weather Channel. For US models: In USA and Canadian waters, press to hear the most recently selected weather station. The WX symbol is displayed on the LCD. Rotate the dial or + / - on the handset mic to change to a different weather channel. Press WX again to return to the most recent channel. If the weather alert mode (ALT) is ON and an alert tone of 1050 Hz is broadcast from the weather station, it is picked up automatically and the alarm sounds. Press any key to hear the weather alert voice message. For all other models: The Wx key can be programmed to a weather channel of your choice. Select a channel you wish to use as your weather channel, then press and hold the Wx key for a few seconds. The radio will beep to confirm your choice. You now have quick access to your favourite channel by pressing the Wx key. DISTRESS CALL mode only: Press to review distress call information. Three Favourite Channels. Also on the handset mic. Press to toggle between your favourite channels. The CH1, CH2, or CH3 symbol appears on the LCD to show which favourite channel is selected. To scan only one of your favourite channels, press 3CH then immediately press and release SCAN. If you want to scan all three favourite channels, press 3CH then immediately press and hold SCAN. To add a favourite channel for the first time, select that channel then hold 3CH to store it in the CH1 location. Repeat the procedure to store two more favourite channels in the CH2 and CH3 locations respectively. If you try and add another favourite channel it will overwrite the existing CH3. CH1 Lowrance - Link-5 Operation and Installation Instructions

11 PAUSE SCAN and CH2 remain unless you delete them. To delete a favourite channel, select that channel then hold down 3CH until the CH1, CH2 or CH3 symbol disappears off the LCD. DISTRESS CALL mode only: Pause the automated distress alert resend countdown timer. Scan. Press to scan between your current channel and the priority channel in DUAL or TRI WATCH mode. The weather channel is also scanned if the USA channel bank is selected and the weather alert mode (ALT) is ON. Hold down SCAN to enter ALL SCAN mode where the priority channel is checked every 1.5 seconds. DISTR. CANCEL Rotary knob SILENCE When a signal is received, scanning stops at that channel and BUSY appears on the screen. If the signal ceases for more than 5 seconds, the scan restarts. Press ENT to temporarily skip over (lock out) an always busy channel when in ALL SCAN mode and resume the scan. If a channel is skipped, the word SKIP ON will momentarily replace the channel name shown on the LCD to designate a skipped channel. The channel name will then have * appended to the end of the channel name. Note that it is not possible to skip over the priority channel. To cancel a skipped channel, select the channel while in normal mode (non-scan mode) then press the ENT key - SKIP OFF will be displayed momentarily and the channel will be restored. Alternatively, you can re-power the radio. Press SCAN to stop at the current channel. Press EXIT to cancel scan mode and return to normal operation. DISTRESS CALL mode only: Press to send a distress cancel call. Channel Select. Turn to select a channel. The current channel is shown on the LCD in BIG digits and an A or B designator suffix (if applicable) in small letters below the channel number. See Appendix C for a complete listing of channel charts. Push to activate the ENT function. You can also use the rotary knob for alphanumeric entry. Turn to step through alphanumeric characters one at a time, then push to confirm each selection. If you make an error, select the < character then push to backup. DSC Call mode only: Rotate the rotary knob to silence the call alert when a DSC call is received. + / - Channel Select. (Located on the handset mic). The current channel is shown on the screen in BIG digits with an appropriate designator suffix A or B in small letters below the channel number. Press + or - to step through the available channels one at a time, or hold down to scroll rapidly through all the available channels. See Appendix C for a complete listing of channel charts. Lowrance - Link-5 Operation and Installation Instructions 11

12 H/L Alphanumeric Entry. This key can be used for both menu selection and for alphanumeric entry. Press + or - to scroll the cursor up or down to menu options when navigating menus. When editing an item containing only numbers, press - to count through the numbers or hold down to scroll rapidly. To enter a character, press + to step through the alphabet or hold down to scroll rapidly. Transmission Power. (Located on the handset mic). High (HI) 25 W or Low (LO) 1 W. Press to toggle between high or low transmission power for the entire channel bank. The HI or LO selection is shown on the LCD. Some channels allow only low power transmissions. Error beeps will sound if the power transmission setting is incorrect. Some channels allow only low power transmissions initially, but can be changed to high power by holding down H/L and PTT at the same time. See Appendix C for a complete listing of channel charts. INFO PAUSE RESEND ACCEPT/OPT/ACK/ENT QUIT DISTR CANCEL Close-up of the Link-5 base station radio, showing the keys 12 Lowrance - Link-5 Operation and Installation Instructions

13 Section 2 - The Radio Menu (MENU) 2-1 Radio Menu Options (Menu) The following options are available through the MENU key: BUDDY LIST LOCAL/DIST BACKLIGHT CONTRAST Maintain your buddy list. See Section 2-2. Set radio sensitivity. See Section 2-3. Set backlight level. See Section 2-4. Set contrast level. See Section 2-4. GPS/DATA DSC SETUP MANUAL SETTING USER MMSI GROUP SETUP ATIS MMSI * ATIS FUNC * INDIV REPLY DSC FUNC LL REPLY AUTO SWITCH TEST REPLY TIMEOUT Set position & UTC manually. See Section 2-5. Set local time and time format. See Section 2-5. DSC Setup Menu. See Section 4. Make DSC calls. See Section 5. RADIO SETUP GPS SIM RESET * Model dependant UIC * CH NAME RING VOLUME KEY BEEP INT SPEAKER WATCH MODE * WX ALERT * COM PORT Radio Setup Menu. See Section 3. Turn the GPS Simulator on/off. See Section 2-6. Reset factory settings. See Section 2-7. Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data. Lowrance - Link-5 Operation and Installation Instructions 13

14 2-2 Maintain Your Buddy List (BUDDY LIST) MENU SELECT BUDDY LIST LOCAL/DIST BACKLIGHT Use the Buddy List to store the names and associated MMSI s of 20 favourite people. Names are stored in the order of entry, with the most recent entry shown first. The following sections show how to add, edit, and delete entries on your BUDDY LIST. Section 5 explains how to call a buddy Add an Entry BUDDY LIST MANUAL NEW ALEX TOM ENTER NAME ENTER MMSI ENTER NAME BOB ENTER MMSI BOB STORE CANCEL 1. Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT. 2. Enter the buddy name, one character at a time (this may be alphanumeric) then press ENT repeatedly until the cursor moves to the MMSI entry line. 3. Enter the MMSI associated with that buddy name (this must be numeric) then press ENT. If the MMSI is for a Coast Station, enter the 7 digits then press ENT twice. 4. The new buddy name and MMSI are displayed. Press ENT to store the new entry, which is displayed at the top of your buddy list. Note: When the BUDDY LIST is full (20 entries), you can make a new entry and the buddy at the end of the list is automatically erased Edit an Entry BUDDY LIST MANUAL NEW ALEX TOM ALEX EDIT DELETE EDIT NAME ALEX EDIT MMSI ALEX STORE CANCEL 1. Select BUDDY LIST. Press ENT to display the list of entries. 2. Scroll down (if required) to the entry and press ENT. 3. Select EDIT. The cursor is at the first character of the name. 4. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor moves to the MMSI line. 5. When you are finished, press ENT (repeatedly if necessary) to display the next screen. 6. Press ENT to store the changes. The buddy list is displayed again. If more changes are required, repeat Steps 2 through 6. Otherwise, press EXIT to cancel. 14 Lowrance - Link-5 Operation and Installation Instructions

15 2-2-3 Delete an Entry BUDDY LIST MANUAL NEW ALEX TOM BUDDY LIST MANUAL NEW ALEX TOM TOM EDIT DELETE DELETE BUDDY TOM YES NO 1. Select BUDDY LIST. Press ENT to display the list of entries. 2. Scroll down (if required) to the entry you want to delete and press ENT. 3. Select DELETE then select YES. 4. The entry is deleted immediately and the buddy list is displayed again. 2-3 Local or Distance Sensitivity (LOCAL/DIST) MENU SELECT BUDDY LIST LOCAL/DIST BACKLIGHT See also SQL (Squelch Control) in Section Set DISTANT Sensitivity SENSITIVITY DISTANT LOCAL Use LOCAL/DIST to improve the sensitivity of the receiver either locally (LOCAL) or over distances (DIST). LOCAL is not recommended for use in open sea conditions. It is designed for use in areas of high radio noise; for example, close to cities. 1. Select LOCAL/DIST then select DIST. 2. Press ENT to activate the DIST setting. This disables local sensitivity and the menu is displayed again Set LOCAL Sensitivity SENSITIVITY DISTANT LOCAL 1. Select LOCAL/DIST then scroll to LOCAL. 2. Press ENT to activate the LOCAL setting. This disables distance sensitivity and the menu is displayed again. LOCAL is displayed on the LCD as a reminder that local sensitivity is selected. 2-4 Backlighting (BACKLIGHT) and Contrast (CONTRAST) MENU SELECT LOCAL/DIST BACKLIGHT CONTRAST Use BACKLIGHT to set the backlight levels for the LCD, keypad and microphone keypad to a comfortable level. Use CONTRAST to set the contrast level for the LCD. Lowrance - Link-5 Operation and Installation Instructions 15

16 2-4-1 Set the Backlighting Level BACKLIGHT LO HI PRESS ENT 1. Select BACKLIGHT. 2. Select a comfortable backlight level using + or - to change the setting. 3. Press ENT to enable the setting and return to the menu. Note: The DISTRESS key backlighting cannot be switched off Set the Contrast Level CONTRAST LO HI PRESS ENT 1. Select CONTRAST. 2-5 GPS Data and Time (GPS/DATA) MENU SELECT BACKLIGHT CONTRAST GPS/DATA 2. Select a comfortable contrast level using + or - to change the setting. 3. Press ENT to enable the setting and return to the menu. If the boat has an operational GPS navigation receiver, the VHF radio automatically detects and updates the vessel position and the local time. However, if the GPS navigation receiver is disconnected or absent, you can specify the vessel position and the local time manually, using the GPS/DATA option. This information is important because it will be used if a DSC distress call is transmitted. You can also select GPS Alert and GPS Simulator options Manually Enter Position and UTC Time (MANUAL) Note that this function is available only if an operational GPS receiver is not connected. GPS/DATA MANUAL SETTING MANUAL LL. 'N. 'E MAN : UTC PORT OPS 10:12AM UTC M 'N 'W 1. Select GPS/DATA, then MANUAL. 2. Enter the latitude, then the longitude, then the UTC. 3. Press ENT when all the information is correct. 16 The vessel s latitude and longitude are shown on the screen, with the UTC time. The prefix M indicates a manual entry. The manual entries are cancelled if a real GPS position is received. Lowrance - Link-5 Operation and Installation Instructions

17 2-5-2 Local Time (TIME OFFSET) The local time can be set by entering the time offset between UTC and local time as follows. GPS/DATA MANUAL SETTING SETTING TIME OFFSET TIME FORMAT TIME DISPL TIME OFFSET +01:30 02:30PM LOC 1. Select GPS/DATA, then SETTING. 2. Select TIME OFFSET to enter the difference between UTC and local time. 15 minute increments can be used with a maximum offset of ±13 hours. L M Y L M L In this example, a difference of +1.5 hours has been entered and the local time is displayed with the suffix LOC. X W V U T S R Q P O N Z A B C D E F G H I K L M Y Q S Z A G K N C T R Z V K S A B I L P G E Z H W U T Q C K R P* A B F E L D U S R Z B T Z H I I X C* D* E X R E B I W C D F R Q H Z E* A F* N G S C K C M E* M Q * H M R Z E H M* C G K V* S D Q O A B F I I K L I X C M W P G Z L A F* H M W O C L M * D W M* U S H I* Q B K L M * Z * P K M International Date Line M STANDARD TIME ZONES Corrected to January 2011 Zone boundaries are approximate Daylight Saving Time (Summer Time), usually one hour in advance of Standard Time, is kept in some places Map outline Mountain High Maps Compiled by HM Nautical Almanac Office W 120 W 90 W 60 W 30 W 0 30 E 60 E 90 E 120 E 150 E Time Format Options (TIME FORMAT) Time can be shown in 12 or 24 hour format. P Q O h m Z 0 A 1 B 2 C 3 C* 3 30 D 4 Standard Time = Universal Time value from table Universal Time = Standard Time + value from table h m h m h m h m h m h m D* 4 30 G 7 L 11 N + 1 Q* V + 9 E 5 H 8 L* O + 2 R + 5 V* E* 5 30 I 9 M 12 P + 3 S + 6 W +10 E 5 45 I* 9 30 M P* T + 7 X +11 F 6 K 10 M* 13 Q + 4 U + 8 Y +12 F* 6 30 K* M 14 No Standard Time legally adopted K M International Date Line M WORLD MAP OF TIME ZONES GPS/DATA MANUAL SETTING SETTING TIME OFFSET TIME FORMAT TIME DISPL TIME FORMAT 12 Hr 24 Hr 07:15AM LOC Lowrance - Link-5 Operation and Installation Instructions 17

18 1. Select GPS/DATA, then SETTING. 2. Select TIME FORMAT. 3. Select 12 Hr or 24 Hr as desired. In this example, 12 hour format has been selected and the LCD shows the AM or PM suffix Time Display Options (TIME DISPLAY) If you have entered the time manually as described in the previous sections, the time is always shown on the screen with the prefix M. However, if the vessel position is being updated through a GPS navigation receiver, you can switch the time display on the screen ON or OFF as follows: SETTING TIME OFFSET TIME FORMAT TIME DISPL Lowrance - Link-5 Operation and Installation Instructions 1. Select GPS/DATA, then SETTING. 2. Select TIME DISPLAY. 3. Select ON (on) or OFF (off ) as desired. In this example, OFF has been selected and the screen no longer shows the time. If the time display is set ON, course and speed data are not displayed on the LCD (see section 2-5-6) Position Display Options (LL display) If you have entered the vessel position manually as described in the previous section, the vessel position is always shown on the screen with the suffix M. However, if the time is being updated through a GPS navigation receiver, you can switch the vessel position display on the screen on or off as follows: SETTING TIME FORMA TIME DISPLY LL DISPLY Course & Speed Display Options (COG/SOG) 1. Select GPS/DATA, then SETTING. 2. Select LL DISPLAY. 3. Select ON (on) or OFF (off ) as desired. In this example, OFF has been selected and the screen no longer shows the vessel position. Use this option to display course over ground (COG) and speed over ground (SOG) data on the screen. SETTING TIME DISPL LL DISPLY COG/SOG TIME DISPLY ON OFF LL DISPLAY ON OFF COG/SOG ON OFF 1. Select GPS/DATA, then SETTING. 2. Select COG/SOG. 3. Select ON (on) or OFF (off ) as desired. In this example, ON has been selected and the screen shows the bearing and speed. If COG/SOG is set ON (on), the time is not displayed on the screen (see section 2-5-4).

19 2-5-7 GPS Alert Options (ALERT) The GPS alert is usually set to ON (on) so that if the GPS navigation receiver is disconnected, the alarm sounds. SETTING LL DISPLY COG/SOG GPS ALERT 2-6 GPS Simulator (SIMULATOR) 1. Select GPS/DATA, then SETTING. 2. Select GPS ALERT. 3. Select ON (on) or OFF (off ) as desired. The GPS Simulator is set to OFF whenever the radio is switched ON, or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on. MENU SELECT DSC SETUP RADIO SETUP GPS SIM GPS ALERT ON OFF 1. Select GPS SIM, then select ON (on) or OFF (off ) as desired. Whenever the GPS Simulator is turned ON (on), simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This data is updated automatically during the simulation. Important: It is not possible to send a DSC transmission when in Simulator mode. 2-7 Reset to Factory Defaults (RESET) Use this setting to return every setting to the factory defaults except all MMSI settings, entries in your buddy list and any edited channel names. MENU SELECT RADIO SETU GPS SIM RESET RESET RADIO ARE YOU SURE YES NO 1. Select RESET. The radio asks for confirmation. 2. Select YES to reset the radio and return to the menu. Lowrance - Link-5 Operation and Installation Instructions 19

20 Section 3 - Radio Setup Menu (RADIO SETUP) 3-1 Radio Setup Menu (RADIO SETUP) The following options are available through MENU key: UIC * Channel band. See Section 3-2. CH NAME RING VOLUME KEY BEEP INT SPEAKER WATCH MODE * WX ALERT * COM PORT * Model dependant Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data. 3-2 Channel (UIC) Edit or delete channel names. See Section 3-3. Note: UIC may not be available on all models. Set the volume level of the incoming call notification beeps. See section 3-4. Set the volume level of the beeps. See section 3-4. Switch ON/OFF (on/off ) the radio s internal speakers. See section 3-5. Selects Priority Channel operation with Dual or Tri watch scanning. See section 3-6. Selects if the WX Alert scanning mode is ON (on) or OFF (off ). See section 3-7. Select NMEA protocol for communications between the VHF radio and any other instruments. See section 3-8. Toggle between USA, International or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel. All the channel charts are shown in Appendix C. RADIO SETUP UIC CH NAME RING VOLUM UIC USA INT L CANADA 20 Lowrance - Link-5 Operation and Installation Instructions

21 3-3 Channel Names (CH NAME) The channel charts are listed in Appendix C with their default name tags. CH NAME gives you the option to edit or delete the channel name tags displayed on the screen. RADIO SETUP CH NAME RING VOLUME KEY BEEP CH NAME TELEPHONE 01 TELEPHONE EDIT DELETE EDIT CH NAME TELEPHONE EDIT CH NAME PHONE1 YES NO 1. Select RADIO SETUP, then CH NAME. 2. Use + or - to step through the channels with their name tags until you see the channel name tag you want to change, then press ENT. In this example, the channel name TELEPHONE associated with channel 01 is being changed to PHONE1. 3. Select EDIT and press ENT to edit the existing name tag. Input the new name over the existing name. It can be a maximum of 12 characters. To delete the channel name, select DELETE and press ENT. 4. Press ENT (repeatedly if necessary) to display the YES/NO confirmation. 5. Press ENT to confirm the new channel name tag or the deletion, then press EXIT to return to the menu. 3-4 RING & BEEP Volume (RING VOLUME) and (KEY BEEP) Set the volume level of the incoming signal beeps (RING VOLUME) and/or the error and warning beeps (KEY BEEP) to HIGH (high) or LOW (low) as follows: RADIO SETUP CH NAME RING VOLUME KEY BEEP RING VOLUME HIGH LOW KEY BEEP HIGH LOW OFF 1. Select RADIO SETUP, then RING VOLUME or BEEP VOLUME as appropriate. 2. Select a HIGH or LOW volume. (It is possible to turn the beeps off completely by selecting KEY BEEP then OFF.) 3. Press ENT to enable the new volume setting and return to the menu. 3-5 Internal Speaker Connections (INT SPEAKER) Switch the radio s internal speaker ON (on) or OFF (off ). The external speaker is always ON (on) if a speaker is plugged into the external speaker jack. Lowrance - Link-5 Operation and Installation Instructions 21

22 RADIO SETUP RING VOLUM KEY BEEP INT SPEAKE 3-6 Set the Priority Channel (WATCH MODE) 1. Select RADIO SETUP, then INT SPEAKER. 2. Select ON (on) or OFF (off ) then press ENT to enable the setting and return to the menu. For EU models, watch mode is similar to a dual watch, scanning between the priority channel CH16 and the working channel. If you have US model and are operating on USA or Canadian channel banks, you can set the priority channel to cover both CH16 and CH09 as well as the working channel, as follows: RADIO SETUP KEY BEEP INT SPEAKER WATCH MODE 3-7 Weather Alert (Wx ALERT) US models ONLY 1. Select RADIO SETUP, then WATCH MODE. 2. Select ONLY 16CH for dual watch mode, or 16CH+9CH for tri watch mode. The NOAA provides several weather forecast channels on USA and Canadian channel banks. If severe weather such as storms or hurricanes are forecast, the NOAA broadcasts a weather alert on 1050 Hz. You can set up the radio to pick up weather alerts, as follows: RADIO SETUP INT SPEAKE WATCH MODE WX ALERT 1. Select RADIO SETUP, then WX ALERT. 2. Select ON (on) or OFF (off ) then press ENT to enable the setting and return to the menu. When a weather alert is broadcast, the alarm will sound. Press any key to hear the weather alert voice message. 3-8 NMEA protocol (COM PORT) This radio uses NMEA0183 protocol to receive GPS data from a compatible GPS unit. The COM Port must be configured correctly before use. The radio can be added to a group of instruments using NMEA protocol. RADIO SETUP WATCH MODE WX ALERT COM PORT INT SPEAKER ON OFF WATCH MODE ONLY 16CH 16CH+9CH WX ALERT ON OFF NMEA CHECKSUM ON OFF CHECKSUM ON is the default setting. 1. Select RADIO SETUP, then COM PORT. 2. Select CHECKSUM ON (on) or OFF (off ) then press ENT to enable the setting and return to the menu. The COM Port uses 4800 baud rate and can receive the following GPS data sentence: RMC, GGA, GLL, GNS. Additionally, this radio will output the following NMEA DSC data: DSC (for DSC call), DSE ( for enhanced position). 22 Lowrance - Link-5 Operation and Installation Instructions

23 Section 4 - DSC Setup Menu (DSC SETUP) 4-1 DSC Setup - Menu Options The following options are available through MENU key: Enter or view your user MMSI. See section 4-2. USER MMSI (If you do not have a user MMSI, see Appendix D.) Enter or change the name and/or details of a group. GROUP SETUP See section 4-3. Enter, change or view your ATIS MMSI. ATIS MMSI * See section 4-5. Enable/disable the ATIS function. ATIS FUNC * See section Choose an automatic or manual response to calls. INDIV REPLY See section 4-4. DSC FUNC Turn the DSC operation ON/OFF (on/off ). See section 4-6. LL REPLY Select the type of response to an LL polling request. See section 4-7. AUTO SWITCH Enable/disable automatic channel switching with DSC message See section 4-8. TEST REPLY Choose an automatic or manual response to DSC test call. See section 4-9. TIMEOUT Set the inactivity timer for Automated and Non-Automated items. See section * Model dependant 4-2 Enter or View Your USER MMSI (USER MMSI) You must enter your user MMSI before you can access the DSC functions. This is a once-only operation Enter your MMSI WARNING A valid USER MMSI must be entered into this radio before these DSC functions can be used. See below for instructions on how to Enter Your USER MMSI (USER MMSI). You can display and read your user MMSI at any time, but you get only one opportunity to enter your user MMSI. Contact Lowrance if you need to change your MMSI after initial input. DSC SETUP USER MMSI GROUP SETUP INDIV REPL INPUT USER MMSI USER MMSI STORE CANCEL USER MMSI INPUT AGAIN Lowrance - Link-5 Operation and Installation Instructions 23

24 1. Select DSC SETUP, then USER MMSI. 2. If this is the first time that you are entering your user MMSI, a dashed line appears. Enter your user MMSI along the dashed line using the rotary knob as described in Section 1-4. Press ENT to confirm each correct entry and to move to the next digit. If you make an error, press - until < appears, then press ENT to backup and correct the entry. 3. Press ENT to store your user MMSI. 4. You may need to enter your user MMSI again as a password check, then press ENT to permanently store the user MMSI and return to the menu View your MMSI You can view your stored user MMSI at anytime by selecting MMSI/GPS in the CALL menu. WARNING NO MMSI DSC DISABLED ENT>>SILENCE Alternatively, the user MMSI is displayed each time the radio is turned on. If a user MMSI is not programmed into the radio, the radio will display a warning and sound an audible alarm at startup warning you that all DSC functions are disabled (model dependant). 4-3 Maintain Your Groups (GROUP SETUP) Use GROUP SETUP to create, edit, or delete 1, 2, or 3 groups of frequently called people stored in alphanumeric order. A group MMSI always starts with Create a Group (GROUP SETUP) DSC SETUP USER MMSI GROUP SETUP INDIV REPL GROUP SETUP MANUAL NEW GROUP NAME GROUP MMSI 0 FISHER STORE CANCEL 1. Select DSC SETUP, then GROUP SETUP. 2. If this is the first time that you are entering a group name, a line of nine zeros appears. Otherwise, any existing group names are displayed. Press ENT to display the input screen. 3. Enter the group name along the dashed line. It can be alphanumeric. Press ENT to confirm each correct entry and to move to the next digit. When you have finished, press ENT repeatedly until the cursor moves to the MMSI line. If you make an error, press - until < appears, then press ENT to backup and correct the entry. 4. Enter the group MMSI. Note that the first number is always 0. Press ENT. 5. The group name and group MMSI are shown in a confirmation screen. Press ENT to store the details and return to the GROUP SETUP screen. 24 Lowrance - Link-5 Operation and Installation Instructions

25 4-3-2 Edit Group Name Details GROUP SETUP MANUAL NEW FISHER1 FRIENDS1 FISHER1 EDIT DELETE EDIT NAME FISHER1 EDIT MMSI FISHER STORE CANCEL 1. Select DSC SETUP, then GROUP SETUP. The existing group names are displayed. Press + or - to scroll to the incorrect entry then press ENT. 2. Press ENT to edit. The group name details are displayed, with the cursor at the first character of the name. 3. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor moves to the MMSI line. 4. When you are finished, press ENT (repeatedly if necessary) to display the next screen. 5. Press ENT to store the changes and return to the GROUP SETUP screen Delete a Group GROUP SETUP MANUAL NEW FISHER2 FRIENDS1 FISHER2 EDIT DELETE DELETE GROUP FISHER2 YES NO 1. Select DSC SETUP, then GROUP SETUP. The existing group names are displayed. 2. Press + or - to scroll to the incorrect entry then press ENT. 3. Select DELETE and press ENT. The radio asks for confirmation. 4. Press ENT to delete the group and return to the GROUP SETUP screen. 4-4 Response to Individual Calls (INDIV REPLY) You can respond to incoming individual calls with an automatic response or with a manual response. Note - this does not apply for Routine Calls. An AUTOmatic response sends an acknowledgement and then sets the request link channel, ready for a conversation after 10 seconds of receiving the call. USA default. A manual response asks if you want to acknowledge the call, and then asks if you want to converse with the caller. This is the default setting for EU models. DSC SETUP USER MMSI GROUP SETUP INDIV REPL INDIV REPLY MANUAL AUTO 3. Press ENT to confirm your choice and return to the menu. 1. Select DSC SETUP, then INDIV REPLY. 2. Select AUTO for an automatic response, or MANUAL for a manual response. Lowrance - Link-5 Operation and Installation Instructions 25

26 4-5 ATIS MMSI & ATIS Functionality EU models ONLY ATIS is only available in certain EU models. You must enter your ATIS MMSI to access ATIS functionality. ATIS must be used if you are navigating inland waterways within Europe. An ATIS MMSI is different to your DSC MMSI. ATIS sends a digital message each time that you release the PTT key. Inland waterways rules require 1 W Tx power on Channels 06, 08, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74 and Enter or Edit YOUR ATIS MMSI DSC SETUP GROUP SETU INDIV REPLY ATIS MMSI INPUT ATIS MMSI INPUT ATIS MMSI STORE CANCEL INPUT AGAIN ATIS MMSI ATIS MMSI STORE CANCEL Note: An ATIS MMSI always starts with the number To enter or edit your ATIS MMSI: 2. Select DSC SETUP, then ATIS MMSI. 3. If this is the first time that you are entering your ATIS MMSI, a dashed line appears. Enter your ATIS MMSI along the dashed line using the rotary knob as described in Section 1-4. The first number is always 9. Press ENT to confirm each correct entry and to move to the next digit. If you make an error, press - until < appears, then press ENT to backup and correct the entry. If you are editing an existing ATIS MMSI, this will be displayed. Make the required changes. 4. Press ENT to store your user ATIS MMSI. 5. You may need to enter your ATIS MMSI again as a password check, then press ENT to permanently store the ATIS MMSI and return to the menu View your ATIS MMSI You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the main menu, DSC SETUP. 26 Lowrance - Link-5 Operation and Installation Instructions

27 4-5-3 Enable ATIS Functionality (ATIS FUNC) ATIS functionality can only be activated if an ATIS MMSI has been entered. See DSC SETUP INDIV REPL ATIS MMSI ATIS FUNC ATIS FUNC ON OFF DSC IS ON 1. Select DSC SETUP, then ATIS FUNC. ATIS Note: It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. If you want to activate ATIS, you must first switch DSC off. A note on the LCD will remind you if DSC is already ON. 2. Select ON to enable the ATIS functionality - DSC must be turned off first. The ATIS annunciator appears on the screen. 4-6 DSC functionality options (DSC FUNC) DSC functionality can be disabled but this is not recommended unless you are going to turn ATIS on. DSC SETUP GROUP SETU. INDIV REPLY DSC FUNC DSC FUNC ON OFF ATIS IS ON 1. Select DSC SETUP, then DSC FUNC. Note: It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. If you want to activate DSC, you must first switch ATIS off. A note on the LCD will remind you if ATIS is already ON. 2. Select ON to enable the DSC functionality - ATIS (if applicable) must be turned off first. The DSC annunciator appears on the screen. There are two annunciators on the screen to show you the current mode: if the DSC annunciator is shown, DSC is operational, if the ATIS annunciator is shown, ATIS is operational. 4-7 Response Type to LL Polling Calls (LL REPLY) You can set the radio to respond to an LL polling request in one of three ways: AUTO MANUAL OFF automatically replies to any incoming LL polling requests from any of your buddies. choose to manually reply to any incoming buddy polling requests. ignores all incoming buddy LL polling requests. Lowrance - Link-5 Operation and Installation Instructions 27

28 DSC SETUP INDIV REPL DSC FUNC LL REPLY LL REPLY MANUAL AUTO OFF 1. Select DSC SETUP, then LL REPLY. 2. Select your response and press ENT to confirm and return to the menu. 4-8 Automatic Channel switching (AUTO SWITCH) When a DSC call is received, it may include a request to change to a specific channel for subsequent communications. If a channel switch request is included, your options are: allow the radio to switch to the requested channel immediately by pressing the ENT button, or do nothing to allow the radio to automatically switch to the requested channel after a delay of 10 seconds, or cancel the automatic switch and remain on the current channel by pressing the EXIT button. However, automatic switching to a subsequent communications channel on receipt of a DSC call might in some cases disrupt important ongoing communications if the working channel changes without the operator knowing. You can prevent the radio from automatically switching from the current working channel by setting the AUTO SWITCH feature to OFF. If the AUTO SWITCH feature is set to OFF, an X will be displayed on the LCD to remind you that this feature is set to off. Additionally, the text AUTO SW OFF will be included in an All Ships or Group call replacing the text AUTO CHxx DSC SETUP DSC FUNC LL REPLY AUTO SWITC AUTO SWITCH ON OFF 1. Select DSC SETUP, then AUTO SWITCH. 2. Select ON (on) to enable automatic channel switching. 3. Select OFF (off) to disable automatic channel switching. 28 Lowrance - Link-5 Operation and Installation Instructions

29 4-9 DSC Test Reply (TEST REPLY) You can respond to incoming DSC TEST calls with an automatic response or with a manual response. MANUAL AUTO manual responce is required, press ENT to confirm or press EXIT to cancel. automatically replies after a 10 second delay with an ACK to any incoming DSC TEST call. DSC SETUP LL REPLY AUTO SWITCH TEST REPLY TEST REPLY MANUAL AUTO 4-10 Set the inactivity timer (TIMEOUT) You can set the inactivity timer with the following options: AUTOMATED NON AUTO you can set the inactivity timer to automatically timeout after a period of inactivity for the following two categories: NON-DISTRESS or DISTRESS Timeout options are: DISTRESS: NO TIMEOUT; 5 MINS; 10 MINS (default is NO TIMEOUT) NON-DISTR: NO TIMEOUT; 10 MINS; 15 MINS (default is 15 MINS) you can set the inactivity timer to exit any non-automated procedure activity. Timeout options are: NO TIMEOUT; 10 MINS; 15 MINS (default is 10 MINS) Note: If NO TIMEOUT is selected, then you must press the EXIT key to exit the procedure. Example: to set a 10 minute TIMEOUT for non-automated functions: 1. Select TIMEOUT, then select NON AUTO 2. Select desired timeout period: NO TIMEOUT, 10 MINS or 15 MINS DSC SETUP AUTO SWITC TEST REPLY TIMEOUT TIMEOUT AUTOMATED NON AUTO NON AUTO NO TIMEOUT 10 MINS 15 MINS In this example, 10 MINS has been selected, meaning the radio will exit any non-automated procedure after a period of 10 minutes of non-activity. Lowrance - Link-5 Operation and Installation Instructions 29

30 Section 5 - Sending and Receiving DSC Calls 5-1 What is DSC? DSC (Digital Selective Calling) is a semi-automated method of establishing VHF, MF, and HF radio calls. It has been designated as an international standard by the IMO (International Maritime Organization) and is part of the GMDSS (Global Maritime Distress and Safety System). Currently, you are required to monitor the VHF Distress Channel 16, but DSC will eventually replace listening watches on distress frequencies and will be used to broadcast routine and urgent maritime safety information. DSC enables you to send and receive calls from any vessel or coast station that is equipped with DSC functionality, and within geographic range. Calls can be categorised as distress, urgency, safety, or routine, and DSC selects a working channel automatically. 5-2 Sending DSC calls WARNING A valid USER MMSI must be entered into this radio before these DSC functions can be used. See 4-2 Enter Your USER MMSI (USER MMSI). Press CALL to show the types of DSC call that can be made. The following options are available through CALL key: INDIVIDUAL Make an individual call or acknowledgement to a new caller or a buddy. See Section 5-2-1, 5-2-2, and LAST CALL Show the details of the most recent incoming call. See Section GROUP Make a call to one of your three groups. See Section ALL SHIPS Make an All Ships call. See Section CALL LOG Show the details of the 20 most recent incoming calls. See Section DISTR LOG Show the details of the 10 most recent distress calls. See Section SENT CALL Show the details of the 20 most recent sent calls. See Section LL REQUEST Request the LL position of a buddy. See Section DSC TEST Make a DSC TEST call. See Section MMSI/GPS Show the programmed MMSI and GPS information See Section Lowrance - Link-5 Operation and Installation Instructions

31 DSC CALL INDIVIDUAL LAST CALL GROUP Note that only three DSC call types can be shown at any one time on the screen. Press + or - to scroll up and down the DSC call types until the cursor is positioned at the desired option. Then press ENT. The DSC call types are: Make a Routine Call (INDIVIDUAL) You can call any other person that has another DSC equipped radio. DSC CALL INDIVIDUAL LAST CALL GROUP INDIVIDUAL ROUTINE SAFETY URGENCY MANUAL MMSI INDIVIDUAL ROUTINE INTER-SHIP INDIVIDUAL ROUTINE SEND? INDIVIDUAL ROUTINE CALLING INDIVIDUAL ROUTINE WAIT... 00:00 INDIVIDUAL ROUTINE ACK FROM 00:00 1. Press CALL to enter DSC mode, then select INDIVIDUAL. This allows you to call another person. 2. Press ENT, the arrow is pointing to <ROUTINE>. However, you can select one of the following call priorities: ROUTINE, SAFETY, URGENCY. To make a Routine call, press ENT to select MANUAL NEW to call a person that is not in your buddy list, otherwise select the name of your buddy. Press ENT. If you selected MANUAL NEW, you need to enter the user MMSI and then press ENT. Note: If the MMSI is for a Coast Station, enter the 7 digits then press ENT twice. 3. Select the Inter-ship working channel and press ENT. The radio automatically lists all Inter-ship (Simplex) channels that can be used. Note: If you wish to use a Duplex channel (Duplex channels cannot usually be called), rotate the dial until Manual appears, then select your channel of choice. If the call is to a Coast Station (MMSI begins with 00), the radio will recognize this and specify the correct channel to talk on. 4. The radio summarizes the call details and asks for confirmation to send the call (SEND?). Press ENT to send the call. The radio goes to CH70 and the TX annunciator is displayed on the screen while the DSC call is being sent. 5. The radio then waits for an acknowledgement and displays the elapsed time since the call was sent. 6. If the call is acknowledged (ACK), press PTT to talk. If there is no reply, retry making the call. See Section Lowrance - Link-5 Operation and Installation Instructions 31

32 5-2-2 Retrying a Routine Call SEND AGAIN? YES NO 1. If there is no reply to your call after 30 seconds (UNABLE TO ACKNOWLEDGE) the radio asks if you want to retry the call (SEND AGAIN?). 2. Select YES and press ENT to retry the call. The radio will repeat this cycle twice. If the call still cannot be placed, the radio returns to normal operation Acknowledgement of an Individual Incoming Call (INDIV) When an incoming call is received, the alarm sounds for 2 minutes and INDIVIDUAL is displayed. INDIVIDUAL ROUTINE FROM :01 ROUTINE FROM CH12 REQUEST 00: CH12 REQUEST 12:45 UTC 00:03 CH12 REQUEST 12:45 UTC ENT->OPTION 00:04 12:45 UTC ENT->OPTION KEY->SILENCE 00:05 ENT->OPTION KEY->SILENCE EXIT->ESC 00:06 OPTION ACK CHANGE CHAN 3. Rotate the SILENCE knob (CH SELECT) to silence the alarm. 4. Push +/- button or rotate the CH knob to scroll any further information about the call 5. Press OPT (ENT) for options on how you want to respond to the call. Options are: ACK to acknowledge the call CHANGE CHAN to acknowledge and request a channel change UNABLE ACK* respond to the call with unable to use the requested channel (* Note: this option is not available with ROUTINE calls) 6. Or press QUIT (EXIT) to return to standby. 32 Lowrance - Link-5 Operation and Installation Instructions

33 5-2-4 Recall the Most Recent Incoming Call (LAST CALL) This facility is useful and used frequently. DSC CALL INDIVIDUAL LAST CALL GROUP BOBBY D INDIVIDUAL ROUTINE 10:22 UTC BOBBY D INDIVIDUAL ROUTINE INTER-SHIP BOBBY D INDIVIDUAL ROUTINE SEND? 1. Press CALL to enter DSC mode. then select LAST CALL. Press ENT to display the contact details of the most recent incoming call. 2. Press ENT to recall the caller. Select the working channel and press ENT. See details about the working channel in section 5-2-1, paragraph 3 above. 3. The radio summarizes the call details and asks for confirmation to send the call (SEND?). Press ENT to send the call, and continue as explained in Section Call a Group (GROUP) DSC CALL INDIVIDUAL LAST CALL GROUP GROUP RD GROUP GROUP #2 GROUP#3 RD GROUP ROUTINE INTER-SHIP RD GROUP ROUTINE SEND? 1. Press CALL to enter DSC mode, then select GROUP. The radio displays the names of your groups you setup in section Select the group that you want to call (the Group MMSI must already be setup). 3. Select the working channel and press ENT. See details about the working channel in section 5-2-1, paragraph 3 above. 4. The radio summarizes the call details and asks for confirmation to send the call (SEND?). Press ENT to send the call, and continue as explained in Section Call All Ships (ALL SHIPS) DSC CALL LAST CALL GROUP ALL SHIPS ALL SHIPS SAFETY URGENCY ALL SHIPS URGENCY INTER-SHIP ALL SHIPS URGENCY SEND? 1. Press CALL to enter DSC mode, then select ALL SHIPS. 2. Select one of the following call priorities: SAFETY to send safety information to all other vessels in range URGENCY for use when a serious situation or problem arises that could lead to a distress situation Lowrance - Link-5 Operation and Installation Instructions 33

34 3. Set the working channel. See details about the working channel in section 5-2-1, paragraph 3 above. 4. The radio then asks for confirmation of the ALL SHIPS call. Press ENT to send the call. Continue as explained in Section Call using the Call Log (CALL LOG) The Call Log contains the contact details for the 20 most recent incoming calls, so that you call any of them again quickly. DSC CALL GROUP ALL SHIPS CALL LOG 01 BOBBY D INDIVIDUAL ROUTINE 10:45 UTC BOBBY D CALL BACK DELETE BOBBY D INDIVIDUAL ROUTINE INTER-SHIP BOBBY D INDIVIDUAL ROUTINE SEND? 1. Press CALL to enter DSC mode, then select CALL LOG. The radio displays the contact details for the most recent incoming call as the first entry (01). 2. Press ENT to advance to next screen. 3. Again press ENT to confirm the call back, then set the working channel. See details about the working channel in section 5-2-1, paragraph 3 above. 4. Press ENT to send the call. Continue as explained in Section Call using the Distress Log (DISTR LOG) The Distress Log contains the Distress Log data for the last 20 relayed Distress Calls so that you can call any of them quickly. Always try to make voice contact on CH16 first, as follows: DSC CALL ALL SHIPS CALL LOG DISTR LOG 01 BOBBY D DISTRESS UNDESIG ENT->OPTION BOBBY D CALL BACK DELETE INFO BOBBY D INDIVIDUAL ROUTINE INTER-SHIP BOBBY D INDIVIDUAL ROUTINE SEND? CALL BACK DELETE INFO Press CALL to enter DSC mode, then select DISTR LOG. The most recent Distress Call received is the first entry (01) in the Distress Log. Select the entry that you want to call. 2. Press ENT to list OPTION and select one of the following options on how you want to respond to the call: to call the station press ENT, then set the channel and continue as explained in Section to delete the entry from the call log, select YES to confirm. to display more information about the station, such as the location and name or MMSI of the vessel in Distress and the nature of the emergency (if specified). Lowrance - Link-5 Operation and Installation Instructions

35 5-2-9 Call using the Sent Call Log (SENT CALL) The Call Log contains the contact details for the 20 most recent sent calls, so that you review details of the call. DSC CALL CALL LOG DISTR LOG SENT CALL 01 BOBBY D INDIVIDUAL ROUTINE 10:45 UTC BOBBY D CALL BACK DELETE BOBBY D INDIVIDUAL ROUTINE INTER-SHIP BOBBY D INDIVIDUAL ROUTINE SEND? 1. Press CALL to enter DSC mode, then select SENT LOG. Scroll down to the desired sent call details. 2. The radio displays the details for the most recent sent call as the first entry (01) in the call log. In the example, the contact details for the most recent call are displayed. 3. Press ENT to advance to next screen. You now have the following options: CALL BACK DELETE to CALL the contact. to delete the entry from the call log, select YES to confirm Request the LL Position of a Buddy (LL REQUEST) DSC CALL DISTR LOG SENT CALL LL REQUEST LL REQUEST SAM TOM BUDDY #3 SAM LL REQUEST SEND? SAM LL REQUEST CALLING... SAM LL REQUEST WAIT.. 00:17 1. Press CALL to enter DSC mode, then select LL REQUEST. 2. Select the buddy whose LL position you want to request then press ENT to send the request. (See Section for the acknowledgement.) 3. The working channel name is displayed while the radio waits for an acknowledgement from your buddy. If there is no reply after 30 seconds the radio asks if you want to retry. Continue as explained in Section Lowrance - Link-5 Operation and Installation Instructions 35

36 Make a DSC test call (DSC TEST) You can test your radio s DSC operation by sending a DSC TEST CALL to a Buddy or other station equipped with a DSC radio. Note: You should not use a routine DSC call to test your radio and you should minimize the use of the safety channel for test purposes Send a DSC TEST call 1. Select DSC CALL then DSC TEST. 2. Select the buddy you want to call from your buddy list, or Select MANUAL NEW then enter the MMSI of the individual you want to call. 3. Press ENT to accept the selection. 4. Press ENT again to SEND the call. Channel 70 is selected automatically and the TX symbol is shown on the LCD while the call is being sent. DSC CALL SENT CALL LL REQUEST DSC TEST DSC TEST MANUAL NEW SAM TOM TOM DSC TEST SEND? TOM DSC TEST WAIT.. 00:17 5. The radio waits for an acknowledgement (WAITING ACK). If the call is acknowledged (DSC TEST ACK), notification is displayed. 6. If there is no reply after 30 seconds, the radio asks you if you want to retry Receiving an incoming DSC TEST call reply (DSC TEST ACK) TEST ACK FROM :22 1. When you receive notification of a DSC TEST reply, press any key to cancel the alert. 2. If the radio recognizes the user MMSI as one of your buddies, the buddy s name is displayed in place of the user MMSI. 3. Scroll to view further information (if available), or press EXIT to cancel Acknowledging an incoming DSC TEST call The radio sounds a friendly two-tone alert when it detects an incoming DSC TEST call. 1. If the radio recognizes the MMSI as one of your buddies, your buddy s name is displayed in place of the MMSI. 2. The radio will automatically acknowledge the call if TEST REPLY is set to AUTO (See section 4-9) and after a TIMEOUT period set for AUTO REPLY. (See section 4-10) 3. Scroll to view further information (if available), or press EXIT to cancel. 36 Lowrance - Link-5 Operation and Installation Instructions

37 TEST CALL FROM :01 CALL FROM AUTO ACK 00: AUTO ACK IN 10S 00:03 Note: These additional information screens are available by rotating the CH knob. AUTO ACK IN 10S 10:12 UTC 00:04 IN 10S 10:12 UTC ENT > ACK 00:05 10:12 UTC ENT > ACK KEY->SILENCE 00:06 4. If TEST REPLY is set to MANUAL, a manual responce is required, press ACK (ENT) to confirm or press QUIT (EXIT) to cancel. (see Section 4-9) TEST CALL FROM :12 CALL FROM AUTO ACK 00: AUTO ACK IS OFF 00:18 Note: These additional information screens are available by rotating the CH knob. AUTO ACK IS OFF 10:12 UTC 00:20 IN 30S 10:12 UTC ENT > ACK 00:23 10:12 UTC ENT > ACK KEY->SILENCE 00: Receiving DSC Calls Several types of DSC calls can be received from vessels within range at various priority levels: DISTRESS See Section 6. ALL SHIPS Urgency, Safety, Routine or Distress priority (see Section 5-3-1) INDIVIDUAL Urgency, Safety, Routine or Distress priority (see Section 5-3-2) GROUP Routine priority only (see Section 5-3-3) GEOGRAPHIC Routine priority only (see Section 5-3-4) POLLED POSITION Routine or Safety priority (see Section 5-3-5) DSC TEST CALL DSC Test Call (see Section ) In addition to the audible alert, the telephone icon will flash on the screen. Lowrance - Link-5 Operation and Installation Instructions 37

38 5-3-1 Receiving an All Ships Call (ALL SHIPS) 1. When you receive notification of an ALL SHIP call, rotate the SILENCE knob (CH SELECT) to silence the alarm. The priority level and the user MMSI are displayed on the screen. If the radio recognises the user MMSI as one of your buddies, the buddy s name is displayed in place of the user MMSI. 2. Press ACCEPT (ENT) to switch to the designated channel immediately or press QUIT (EXIT) to return to the current working channel. Note: The radio will automatically switch to the designated channel after 10 seconds if no key is pressed and AUTO SWITCH = ON (see Section 4-8): ALL SHIP SAFETY FROM TOM 00:01 SAFETY FROM TOM AUTO SWITCH 00:02 TOM AUTO SWITCH CH14 IN 10S 00:03 Note: These additional information screens are available by rotating the CH knob. AUTO SWITCH CH14 IN 10S 10:12 UTC 00:04 CH14 IN 10S 10:12 UTC ENT > ACCEPT 00:05 10:12 UTC ENT > ACCEPT KEY->SILENCE 00:06 However, If AUTO SWITCH =OFF, then AUTO SW OFF will be displayed and manual channel change is required: ALL SHIP SAFETY FROM TOM 00:12 SAFETY FROM TOM AUTO SW OFF 00:15 TOM AUTO SW OFF CH14 REQUEST 00:18 Note: These additional information screens are available by rotating the CH knob. AUTO SW OFF CH14 REQUEST 10:12 UTC 00:20 CH14 REQUEST 10:12 UTC ENT > ACCEPT 00:23 10:12 UTC ENT > ACCEPT KEY->SILENCE 00:25 3. No acknowledgement is needed. Press PTT to initiate voice contact. 4. The call data is stored in the Call Log (see Section 5-2-7) Receiving an Individual Call (INDIV) 1. When you receive notification of an INDIV call, rotate the SILENCE knob (CH SELECT) to silence the alarm. INDIV calls are almost always Routine priority. If the radio recognises the user MMSI as one of your buddies, the buddy s name is displayed in place of the user MMSI. 38 Lowrance - Link-5 Operation and Installation Instructions

39 INDIVIDUAL SAFETY FROM TOM 00:12 SAFETY FROM TOM AUTO SW OFF 00:15 TOM AUTO SW OFF CH67 REQUEST 00:18 Note: These additional information screens are available by rotating the CH knob. AUTO SW OFF CH67 REQUEST 10:12 UTC 00:20 CH67 REQUEST 10:12 UTC ENT > OPTION 00:23 10:12 UTC ENT > OPTION KEY->SILENCE 00:25 2. Press OPT (ENT) for options on how you want to respond to the call. Options are: ACK respond to the call with requested channel CHANGE CHAN respond to the call with but request a different channel UNABLE ACK* respond to the call with unable to use the requested channel (* Note: this option is not available with ROUTINE calls) 3. Or press QUIT (EXIT) to return to standby. 4. The call data is stored in the Call Log (see Section 5-2-7) Receiving a Group Call (GROUP) 1. When you receive notification of a GROUP call, rotate the SILENCE knob (CH SELECT) to silence the alarm. The priority level is always routine and the group is identified on the screen. The group will be one of the three groups of frequently called people that you set up earlier (see Section 4-3). 2. PressACCEPT (ENT) to switch to the designated channel immediately or press QUIT (EXIT) to return to the current working channel. Note: The radio will automatically switch to the designated channel after 10 seconds if no key is pressed and AUTO SWITCH = ON (see Section 4-8): GP CALL FROM TOM 00:01 CALL FROM TOM AUTO SWITCH 00:02 TOM AUTO SWITCH CH13 IN 10S 00:03 Note: These additional information screens are available by rotating the CH knob. AUTO SWITCH CH13 IN 10S 10:12 UTC 00:04 CH13 IN 10S 10:12 UTC ENT > ACCEPT 00:05 10:12 UTC ENT > ACCEPT KEY->SILENCE 00:06 Lowrance - Link-5 Operation and Installation Instructions 39

40 However, If AUTO SWITCH =OFF, then AUTO SW OFF will be displayed and manual channel change is required: GP CALL FROM TOM 00:12 CALL FROM TOM AUTO SW OFF 00:22 TOM AUTO SW OFF CH13 REQUEST 00:25 Note: These additional information screens are available by rotating the CH knob. AUTO SW OFF CH13 REQUEST 10:12 UTC 00:28 CH13 REQUEST 10:12 UTC ENT > ACCEPT 00:32 10:12 UTC ENT > ACCEPT KEY->SILENCE 00:35 3. The call data is stored in the Call Log (see Section 5-2-7) Receiving a Geographic Call (GEOGRAPH) A geographic call is received by vessels within a specific geographic boundary area. 1. When you receive notification of an GEOGRAPH call, rotate the SILENCE knob (CH SELECT) to silence the alarm. If the radio recognises the user MMSI as one of your buddies, the buddy s name is displayed in place of the user MMSI. 2. Press ACCEPT (ENT) to switch to the designated channel immediately or press QUIT (EXIT) to return to the current working channel. GEOGRAPHICAL CALL FROM TOM 00:12 CALL FROM TOM CH13 REQUEST 00:22 TOM CH13 REQUEST 10:11 UTC 00:25 Note: These additional information screens are available by rotating the CH knob. CH13 REQUEST 10:11 UTC ENT > ACCEPT 00:28 10:11 UTC ENT > ACCEPT KEY->SILENCE 00:32 3. Monitor the working channel for an announcement from the calling vessel Receiving a Polled Position Call (POSITION) When you receive GPS position data from a buddy in response to your LL request (see Section ), you are recommended to make a written note of the position, especially if it is a good fishing position. If enhanced LL position information is available from your buddy, this is shown on the screen until the screen display changes. POSITION REPLY FROM TOM 00:12 REPLY FROM TOM 12'23.456'N 00:22 TOM N 123' E 00: N E KEY->SILENCE 00:28 40 Lowrance - Link-5 Operation and Installation Instructions

41 Section 6 - Distress Calls WARNING A valid USER MMSI must be entered into this radio before these DSC functions can be used. See section 4-2 Enter Your USER MMSI (USER MMSI). 6-1 Sending a Distress Call 1. Open the red cover labelled DISTRESS to expose the red Distress key. 2. TO SEND AN IMMEDIATE DISTRESS CALL (Undesignated): HOLD DOWN the DISTRESS key for about 3 seconds, until you see the distress call sending message (DISTRESS CALL SENDING) on the screen. The whole display starts to flash and beep loudly. DISTRES CALL UNDEFINED FIRE FLOODING DISTRES CALL >UNDEFINED HOLD DISTRES 2 SECONDS.. DISTRESS CALL SENDING... Or, if time is available, specify the nature of the distress 3. TO SEND A DISTRESS CALL with Distress type: 4. Press and release the DISTRESS key to display the following categories. Use the CH knob to scroll to the category that describes your situation: UNDESIGNATED (Undesignated) FIRE (Fire) FLOODING (Flooding) COLLISION (Collision) GROUNDING (Grounding) LISTING (Listing) SINKING (Sinking) ADRIFT (Adrift) ABANDONING (Abandoning) PIRACY (Piracy) OVER BOARD (Over Board) 5. Hold down the DISTRESS key for about 3 seconds, until you see the distress call sending message (DISTRESS CALL SENDING) on the screen. The whole display starts to flash and beep loudly. Lowrance - Link-5 Operation and Installation Instructions 41

42 6. After the Distress Call is sent, the radio waits for an acknowledgment. 7. The Distress Call is automatically re-sent every 3.5 to 4.5 minutes until a distress acknowledgement is received or: Press RESEND (CALL) to immediately resend the Distress Call Press PAUSE (3CH) to pause the automatic Distress Call resend timer Press DISTR.CANCEL (SCAN) to cancel the Distress Call Press INFO (WX) to view details of the sent Distress Call Press OPT (ENT) to view and select the available options: DISTRES CALL SENT! WAIT.. ENT > OPTION RESEND:03:30 OPTION RESEND PAUSE RESEND:03:20 OPTION PAUSE CANCEL RESEND:03:10 Options are: RESEND PAUSE CANCEL to resend the Distress call immediately. to PAUSE the RESEND countdown timer. Press Exit to continue. to CANCEL the Distress Call and transmit a DISTRESS CANCEL call. Use the PTT microphone to report your situation: OPTION PAUSE CANCEL RESEND:03:20 SEND CANCEL? YES NO RESEND:03:20 DISTR CANCEL SENDING.. DISTR CANCEL SENT PTT-->REASON DISTR CANCEL COMPLETED EXIT > ESC 8. After a DISTRESS ACK is received, rotate the SILENCE knob (CH SELECT) to silence the alarm, then use the PTT microphone to report your situation. 9. The following information (if available) is contained in the DIstress Call: - Nature Of Distress (if available) - Position information. The latest GPS or manual input position is held for 23.5 hours, or until the power is turned OFF. 42 Lowrance - Link-5 Operation and Installation Instructions

43 6-2 Receiving a Distress Call (DISTRESS!) 1. An alert sounds when a distress call (DISTRESS!) is received. Rotate the SILENCE knob (CH SELECT) to silence the alarm. You do not need to send an acknowledgement. DISTRESS FLOODING :01 FLOODING N 00: N W 00: N W 10:12 UTC 00: W 10:12 UTC AUTO SWITCH 00:05 10:12 UTC AUTO SWITCH CH16 IN 10S 00:06 Note: These additional information screens are available by rotating the CH knob. AUTO SWITCH CH16 IN 10S KEY >SILENCE 00:07 CH16 IN 10S KEY >SILENCE EXIT > ESC 00:08 KEY >SILENCE EXIT > ESC ENT > ACCEPT 00:09 2. The radio will automatically select CH16 after 10 seconds if no user intervention, or press ACCEPT (ENT) to change to CH16 immediately. Details of the distress call are shown on the screen. Details include the user MMSI and nature of the emergency (if specified), also the time and the location (if specified). If the location and time are not specified, these are replaced with sequences of 9s and 8s respectively. 3. Press PTT to establish voice contact. This radio is capable of receiving enhanced LL position data if the radio transmitting the Distress Call is sending this. This provides the position of the distressed vessel to within 20 m (60ft). 6-3 Distress Acknowledgement (DISTRESS ACK) An alert sounds when a Distress Relay (DISTRESS RELAY) is received. Rotate the SILENCE knob (CH SELECT) to silence the alarm. DISTRESS ACK FROM :01 ACK FROM FLOODING 00: FLOODING :03 FLOODING N 00:04 Try to make voice contact with the calling vessel. Maintain a listening watch on CH16 and standby to lend assistance Lowrance - Link-5 Operation and Installation Instructions 43

44 For a Distress Acknowledgement (DISTRESS ACK) sent from the Search and Rescue (SAR) authorities of your country, your radio automatically cancels Distress Mode transmissions and CH16 appears. Press PTT to establish voice contact with the Search and Rescue (SAR) authority. The Search and Rescue (SAR) authorities of your country are the only instance allowed to send a Distress Acknowledgement (DISTRESS ACK). 6-4 Distress Relay Individual (INDIV DISTR RELAY) When an incoming Individual Distress Relay call is received, the alarm sounds and INDIV DISTR RELAY is displayed. 1. Rotate the SILENCE knob (CH SELECT) to silence the alarm. 2. Push +/- button or rotate the CH knob to scroll any further information about the call 3. ALL MODELS: Press ACCEPT (ENT) key to immediately accept the channel change before the 10s timer expires 4. US MODELS: Press ACK (ENT) key to ACK the call after the 10s delay (when INDIV REPLY is set to MANUAL) 5. Or press QUIT (EXIT) to return to standby. The call data is stored in the Call Log (see Section 5-2-7). Individual Distress Relay functionality will vary depending on your radio model: ALL models: Prior to 10s Auto Channel change timer expires, display shows: INDIV DISTR RELAY FROM :00 FLOODING N 00:03 CH16 IN 10S KEY >SILENCE EXIT > ESC 00:06 KEY >SILENCE EXIT > ESC ENT > ACCEPT 00:07 EU only models: ACCEPT (ENT) key is pressed, or 10s Auto Channel change timer expires: INDIV DISTR RELAY FROM :00 FLOODING N 00:03 02:43UTC E CHANNEL IS 00:06 AUTO CHANGED KEY >SILENCE EXIT > ESC 00:07 US only models: ACT (ENT) key is pressed, or MANUAL / AUTO ACK (depending on INDIV REPLY setting): INDIV DISTR RELAY FROM :00 FLOODING N 00:03 AUTO CHANGED KEY >SILENCE ENT > ACK 00:07 KEY >SILENCE ENT > ACK EXIT > ESC 00:07 44 Lowrance - Link-5 Operation and Installation Instructions

45 Section 7 - Installation This Lowrance radio is designed to generate a digital maritime distress call to facilitate search and rescue. To be effective as a safety device, this radio must be used only within the geographic range of a shore-based VHF marine Channel 70 distress and safety watch system. The geographic range may vary but under normal conditions is approximately 20 nautical miles. Installation Options There are two ways to install the radio. You can choose: A deck or overhead mounted gimbal installation. The reversible mounting gimbal is fixed to a suitable site and the radio is placed into it. The radio can be removed for storage and the viewing angle can be adjusted. A recessed installation. The radio is recessed into a cavity cut into a bulkhead. The radio fixture is permanent and the viewing angle cannot be adjusted. Location Requirements Please check these before doing any cutting or drilling. Whichever installation method you choose, ensure that the chosen location: Is at least 3 (1 m) from the antenna Allows easy connection to (at least) a 10 Amp fused 13.6 V DC electrical source and the antenna Is at least 1.5 (45 cms) from the compass to avoid creating magnetic deviation of the compass during radio operation Has a suitable space close by for installing the microphone bulkhead mount Provides easy access to the controls on the front panel Provides reasonable access to the wiring at the back of the radio Provides enough room to fix the DSC warning label The VHF has a large LCD screen with an optimum viewing angle of approx. +/-20 deg. Ensure the chosen location provides a suitable view of the display. Ideally, the user should be directly in front of the display or no more than +/-20 deg from the front of the display. Note: If unsure, temporarily power up the radio and check for a suitable location. Lowrance - Link-5 Operation and Installation Instructions Side Top

46 Checklist The following items should be supplied in the box. Check before starting the installation and contact your dealer if an item is missing. Note: An antenna is not provided. Consult your Lowrance dealer for advice if necessary. 1. Mounting gimbal for the VHF radio 2. GPS connection cable 3. Two mounting knobs 4. Microphone bulkhead mount 5. Four countersunk self-tapping screws for the mounting gimbal 6. Four flat screws for the mounting gimbal 7. Four spring washers for the mounting gimbal 8. Four plain washers for the mounting gimbal 9. Four nuts for the mounting gimbal 10. Two self-tapping screws for the microphone bulkhead mount 11. Two flat screws for the microphone bulkhead mount 12. Two spring washers for the microphone bulkhead mount 13. Two plain washers for the microphone bulkhead mount 14. Two nuts for the microphone bulkhead mount 15. Four M5x32 screws for recessed installation 16. Four nuts for the recessed installation Not pictured: Installation template Warranty card DSC Warning label sticker This Operation and Installation manual One 7 Amp spare fuse in case of accidental reverse of battery polarity Base unit and microphone Lowrance - Link-5 Operation and Installation Instructions

47 Gimbal Installation 1. Hold the mounting gimbal at the chosen location and use a soft pencil to mark the screw hole positions onto the mounting surface. 2. If you can t reach behind the mounting surface to attach the nuts, use the self-tapping screws instead of the flat screws shown in the picture. If you re drilling into fibreglass, use a drill bit smaller than 3/16 (5mm) to drill the pilot holes. Otherwise, drill the four screw holes where marked, using a 3/16 (5mm) drill bit. Drill completely through the mounting surface. 3. Use a Philips screwdriver and the set of four flat screws, spring washers, plain washers, and nuts to attach the mounting gimbal to the location site. 4. Slide the radio into the mounting gimbal. 5. Insert the two mounting knobs through the holes and tighten them sufficiently to hold the radio at the desired viewing angle. Change the Viewing Angle The viewing angle on the gimbal mount has a 20º tilt range. To change the current viewing angle on the gimbal mount: 1. Support the radio, then cautiously loosen the mounting knobs until the radio can be moved. 2. Re-position the radio then tighten the mounting knobs again. Recessed Installation 1. Tape the installation template onto the chosen location site. 2. Cut out the area marked by the solid dark line. (The dashed line indicates the total area Lowrance - Link-5 Operation and Installation Instructions 47

48 that will be covered by the radio fascia after installation.) Drill the 4 mounting holes. 3. Remove the installation template and slide the radio into the cavity. 4. Screw each M5x32 screw through the screw hole in the mounting bracket, then attach the stopper. If your bulkhead exceeds 0.51 (13mm), the stopper can be discarded if necessary. 5. Tighten the M5x32 screws until the radio is held firmly against the rear of the bulkhead. Install the Microphone Bulkhead Mount 1. Hold the microphone bulkhead mount at the chosen location and use a soft pencil to mark the screw hole positions on the mounting surface. Ensure that the microphone curly cable will comfortably reach this location BEFORE you drill. 2. Drill the two pilot screw holes where marked. 3. Use a short length Philips screwdriver and the set of two flat screws, spring washers, plain washers, and nuts to secure the microphone bulkhead mount at the location site. 4. Hang the microphone on its mount. 0.47" (12 mm) 0.96" (24.5 mm) 1.16" (29.5 mm) 0.47" (12 mm) 0.96" (24.5 mm) 1.16" (29.5 mm) 48 Lowrance - Link-5 Operation and Installation Instructions

49 Connect the Radio Cables CAUTION A DSC warning label is supplied with this radio. To comply with FCC regulations, this warning label must be affixed in a location that is clearly visible from the operating controls of this radio. Make sure that the chosen location is clean and dry before applying this label. The connectors are on the rear of the base unit, as follows: v w x z Fix the DSC label GPS/COM connector. For connection to GPS device via NMEA (If you re not using this, be sure to put the protective cap securely over the connector to protect it from moisture and dust). GPS/COM cable. For above connector. See the following table for wiring and color codes. Red Power wire. Connect this to the Positive (+) battery terminal. Check that a 7 Amp fuse is installed on this power cable close to the battery. Black Power wire. Connect this to the Negative (-) battery terminal. External Speaker connector. Connect to an external speaker BEFORE powering on the radio. Use a 4 Ohm 4 Watt external speaker. White wire to speaker (+). Bare wire to speaker (-) NOTE: Ensure wires are electrically insulated if not used. ANT. A radio antenna is not supplied. A suitable radio antenna must be mounted and connected before operating this radio. Consult your dealer for advice if necessary. GND. A ground connection is not usually required. v z x w Lowrance - Link-5 Operation and Installation Instructions 49

50 Wiring for GPS/COM connector Pin Wire Function Notes 1 Red No connection (Not used) 2 Orange OUT (+) (To ) 3 White Program/clone (Not used) 4 Green IN (-) (From ) 5 Yellow IN (+) (From ) 6 Black OUT (-) (Ground) 7 Blue No connection (Not used) 8 Grey No connection (Not used) 8 Grey 2 Orange 5 Yellow 3 White 7 Blue 4 Green 1 Bare wire 6 Black Set Up the Radio CAUTION You can t make any DSC transmissions until you ve obtained a user MMSI and entered it into your radio. The user MMSI is a unique nine digit number, similar to a personal telephone number. It is used on marine transceivers that are capable of using DSC (Digital Select Calling). If you don t have a user MMSI contact the appropriate authorities in your country. If you re unsure who to contact, consult your Lowrance dealer. A Group MMSI begins with 0 followed by 8 numeric digits (0xxxxxxxx) A Coast Station MMSI begins with 00 followed by 7 numeric digits. You just need to add the 7 digits and the radio will add the beginning 00 for you Enter Your User MMSI See section 4-2 Enter Your USER MMSI (USER MMSI). 50 Lowrance - Link-5 Operation and Installation Instructions

51 The Completed Installation GPS product External speaker VHF Antenna Antenna cable Link-5 Base unit with speaker microphone GPS / COM NMEA connection cable Fuse on Red power cable External speaker cable Black power cable 12V dc Battery CAUTION Under extreme operating conditions, the temperature of the rear heat-sink on this radio may exceed normal surface temperatures. Caution is advised to prevent possible skin burns. Lowrance - Link-5 Operation and Installation Instructions 51

52 Appendix A - Technical Specifications LOWRANCE Link-5 GENERAL Power supply: 12 V DC battery system Low battery alert: 10.6 V DC +/- 5% Current drain - Transmit 5 A at 25 W Tx / 1.5 A at 1 W Tx (@ 12 V DC) Receive Less than 250 ma in standby Temperature range: -20ºC to +55ºC (-4ºF to 131ºF) Usable channels: International, USA, Canada, Weather (country specific) Mode: 16K0G3E (FM) / 16K0G2B (DSC) DSC mode: Class D (Global) with dual receiver (individual CH70) Standards: ITU-R M (US models), EN (EU models) PHYSICAL LCD display (viewing): Contrast control: Dimming control: Antenna connector: Waterproof: Dimensions: Weight: 46 x 26 mm (1.8 x 1.0 ), matrix FSTN Yes Yes SO-239 (50 ohm) JIS-7 Compass safe distance: 0.5 m (1.5 ) Frequency stability: Frequency control: GPS/NMEA input: 161(W) x 75(H) x 147(D) mm - without bracket 1.29 kg (2.8 lbs) - without microphone +/- 10 ppm PLL Yes Comm. port: 4800 baud NMEA 0183 DSC: GPS/NMEA input: GPS data sentences can be received: NMEA output: NMEA output sentences: Yes, CLASS-D (Global - separate CH70 receiver built in) Yes RMC, GGA, GLL, GNS Yes DSC ( for DSC call), DSE (for enhanced position). 52 Lowrance - Link-5 Operation and Installation Instructions

53 FEATURES Flush mount kit Local/Distant control: Position polling: Group call: Call logs: Channel naming: Tri watch: Favourite channel scan: All scan: User programmable MMSI: MMSI and NAME directory: Yes Yes Yes Yes Yes - 20 individual and 10 distress Yes Yes Yes Yes Yes Yes - 20 numbers & group TRANSMITTER Frequency: Output power: Transmitter protection: Max Frequency deviation: Spurious & harmonics: Modulation distortion: MHz 25 W / 1 W selectable Open / short circuit of antenna +/- 5 khz better than 0.25 µ W Less than 4%@ 1kHz for a +/-3 khz deviation RECEIVER Frequency: MHz 12dB SINAD sensitivity: 0.25 µv (distant) / 0.8 µv (local) 20db SINAD sensitivity: 0.35 µv Adjacent CH selectivity: more than 70 db Spurious response: more than 70 db Intermodulation rejection ratio: more than 68 db Residual noise level: more than -40 db unsquelched Audio output power: 2 W (with 8 ohm at 10% distortion) 4 W with 4 ohm external speaker Note: Specifications are subject to change without notice. Lowrance - Link-5 Operation and Installation Instructions 53

54 Appendix B - Troubleshooting 1. The transceiver will not power up. A fuse may have blown OR there is no voltage getting to the transceiver. a. Check the power cable for cuts, breaks, or squashed sections. b. After checking the wiring, replace the 7 Amp fuse (1 spare fuse is supplied). c. Check the battery voltage. This must be greater than 10.5 V. 2. The transceiver blows the fuse when the power is switched on. The power wires may have been reversed. a. Check that the red wire is connected to the positive battery terminal, and the black wire is connected to the negative battery terminal. 3. The speaker makes popping or whining noises when the engine is running. Electrical noise may be interfering with the transceiver. a. Re-route the power cables away from the engine. b. Add a noise suppressor to the power cable. c. Use resistive spark plug wires and/or use an alternator whine filter. 4. No sound from the external speaker. a. Check that the external speaker cable is physically connected. b. Check the soldering of the external speaker cable. 5. Transmissions are always on low power, even when high (HI) power is selected. The antenna may be faulty. a. Test the transceiver with a different antenna. b. Have the antenna checked out. 6. Battery symbol is displayed. The power supply is too low or too high. a. Check the battery voltage. This should be at least 10.5 V ± 0.5 V DC. b. Check the alternator on the vessel. 7. No position information is displayed. The GPS cable may faulty or the GPS setting may be incorrect. a. Check that the GPS cable is physically connected. b. Check the polarity of the GPS cable. c. Check the baud rate setting of the GPS if applicable. The baud rate setting should be 4800 and parity should be set to NONE. 54 Lowrance - Link-5 Operation and Installation Instructions

55 Appendix C - US & ROW VHF Marine Channel Charts The following channel charts are provided for reference only and may not be correct for all regions. It is the operators responsibility to ensure correct channels and frequencies are used for local regulations. C-1 International Channel Chart CH TX (MHz) RX (MHz) MODE TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS/VTS S Inter-ship Safety Yes No SAFETY D Port Operations No Yes PORT OPS S Commercial (inter-ship only) Yes No COMMERCIAL S Inter-ship Yes Yes CALLING S Commercial Yes Yes COMMERCIAL S Port Operations Yes Yes VTS S Port Operations Yes Yes PORT OPS/VTS S Inter-ship Navigation Safety (bridge-to bridge) Yes No BRIDGE COM S Port Operations Yes Yes PORT OPS/VTS REMARK S Port Operations Yes Yes PORT OPS 1 1W only S International Distress, Safety, and Calling Yes Yes DISTRESS S State Controlled Yes Yes SAR 1 1W only D Port Operations No Yes PORT OPS D Ship to Shore No Yes SHIP-SHORE D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Port Operations No Yes PORT OPS Lowrance - Link-5 Operation and Installation Instructions 55

56 D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS D Public Correspondence No Yes TELEPHONE D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS S Commercial, bridge-to-bridge Yes No BRIDGE COM S Inter-ship Yes No SHIP-SHIP S Port Operations Yes Yes PORT OPS Digital Selective Calling - DSC DSC S Port Operations Yes Yes PORT OPS S Inter-ship Yes No SHIP-SHIP S Port Operations Yes Yes PORT OPS S Port Operations Yes Yes PORT OPS S Ship to Shore Yes No SHIP-SHORE D Ship to Shore No Yes SHIP-SHORE D Port Operations No Yes PORT OPS D Port Operations No Yes PORT OPS D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE Special Notes on International Channel Usage 1. LOW POWER (1W) only. 2. Channel 70 is designated for use exclusively for Digital Selective Calling (DSC), such as Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. Note: The INTERNATIONAL channel bank is not legal for use in U.S. or Canada waters. Select the INTERNATIONAL channel bank for use in Australia, New Zealand and other Asia Pacific regions, and all other regions where otherwise not specified. KEY: S = Simplex operating channel; D = Duplex operating channel. 56 Lowrance - Link-5 Operation and Installation Instructions

57 C-2 USA Channel Chart CH TX (MHz) RX (MHz) MODE TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG 01A S Port Operations, Selected VTS Areas Yes Yes PORT OPS/VTS 03A S US Government, Coast Guard Yes Yes UNAUTHORIZED 4 05A S Port Operations, Selected VTS Areas Yes Yes PORT OPS/VTS S Inter-ship Safety Yes No SAFETY 07A S Commercial Yes Yes COMMERCIAL S Commercial (inter-ship only) Yes No COMMERCIAL S Recreational Calling Channel Yes Yes CALLING S Commercial Yes Yes COMMERCIAL S Commercial, VTS in Selected Areas Yes Yes VTS S Port Operations, Selected VTS Areas Yes Yes PORT OPS/VTS S Inter-ship Navigation Safety (bridge-to bridge), 1W with Power-up REMARK Yes No BRIDGE COM 3 1W S Port Operations, Selected VTS Areas Yes Yes PORT OPS/VTS S Environmental S International Distress, Safety, and Calling ENVIRONMEN- TAL Yes Yes DISTRESS 2 RX only S State Controlled Yes Yes SAR 1 1W only 18A S Commercial Yes Yes COMMERCIAL 19A S Commercial Yes Yes COMMERCIAL D Port Operations, Canadian Coast Guard No Yes PORT OPS 20A S Port Operations Yes Yes PORT OPS 21A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 4 22A S Coast Guard Liaison Yes Yes COAST GUARD 23A S U.S. Government, Coast Guard Yes Yes UNAUTHORIZED D Public Correspondence, Marine operator No Yes TELEPHONE D Public Correspondence, Marine operator No Yes TELEPHONE D Public Correspondence, Marine operator No Yes TELEPHONE D Public Correspondence, Marine operator No Yes TELEPHONE D Public Correspondence, Marine operator No Yes TELEPHONE 61A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 4 63A S Port Operations, VTS in Selected Areas Yes Yes PORT OPS/VTS 64A S U.S. Government, Canadian Commercial Fishing Yes Yes UNAUTHORIZED 4 65A S Port Operations Yes Yes PORT OPS 66A S Port Operations Yes Yes PORT OPS S Commercial, bridge-to-bridge, 1W with Power-up Yes No BRIDGE COM 3 1W Lowrance - Link-5 Operation and Installation Instructions 57

58 S Boat Operations, Recreational Yes No SHIP - SHIP S Boat Operations, Recreational Yes Yes PLEASURE Digital Selective Calling - DSC DSC S Boat Operations, Recreational Yes Yes PLEASURE S Boat Operations, Recreational Yes No SHIP - SHIP S Port Operations Yes Yes PORT OPS S Port Operations Yes Yes PORT OPS S Port Operations Yes Yes PORT OPS 1 1W only 78A S Boat Operations, Recreational Yes No SHIP - SHIP 79A S Commercial Yes Yes COMMERCIAL 80A S Commercial Yes Yes COMMERCIAL 81A S Special Notes on USA Channel Usage 1. LOW POWER (1 W) only. 2. Receive Only. U.S. Government, Environmental Protection Agency Operations 3. LOW POWER (1 W) initially. Override to HIGH POWER by holding down H/L key before transmitting. Used normally in bridge-to-bridge communications. 4. Lightly shaded simplex channels 03A, 21A, 23A, 61A, 64A, 81A, 82A, and 83A cannot be lawfully used in U.S. waters unless special authorization is obtained from the U.S. Coast Guard. Not for use by the general public. 5. The letter A illuminated by the channel number indicates the USA channel is simplex. This same channel is always duplex when selecting International. There is no A reference for International channels. The letter B is only used for some Canadian Receive only channels. 6. Channel 70 is designated for use exclusively for Digital Selective Calling (DSC), such as Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. KEY: S = Simplex operating channel; D = Duplex operating channel. Yes Yes UNAUTHORIZED 4 82A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 4 83A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED D Public Correspondence, Marine Operator No Yes TELEPHONE 84A S Public Correspondence, Marine Operator D Public Correspondence, Marine Operator No Yes TELEPHONE 85A S Public Correspondence, Marine Operator D Public Correspondence, Marine Operator No Yes TELEPHONE 86A S Public Correspondence, Marine Operator D Public Correspondence, Marine Operator No Yes TELEPHONE 87A S Public Correspondence, Marine Operator D Public Correspondence, Marine Operator No Yes TELEPHONE 88A S Commercial, Inter-ship Only Yes No COMMERCIAL 58 Lowrance - Link-5 Operation and Installation Instructions

59 C-3 CANADA Channel Chart CH TX (MHz) RX (MHz) MODE TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE 04A S Canadian Coast Guard, SAR Yes Yes CANADIAN CG 05A S Port Operations, VTS in Selected Areas Yes Yes PORT OPS/VTS S Inter-ship Safety Yes No SAFETY 07A S Commercial Yes Yes COMMERCIAL S Commercial (inter-ship only) Yes No COMMERCIAL S Recreational Calling Channel Yes Yes CALLING S Commercial Yes Yes COMMERCIAL S Commercial, VTS in Selected Areas Yes Yes VTS S Port Operations, VTS in Selected Areas Yes Yes PORT OPS/VTS S Inter-ship Navigation Safety (bridge-to bridge) 1W with power-up REMARK Yes No BRIDGE COM 3 1W S Port Operations, VTS in Selected Areas Yes Yes PORT OPS/VTS S Commercial Yes Yes COMMERCIAL 1 1W only S International Distress, Safety, and Calling Yes Yes DISTRESS S State Controlled Yes Yes SAR 1 1W only 18A S Commercial Yes Yes COMMERCIAL 19A S Canadian Coast Guard Yes Yes CANADIAN CG D Canadian Coast Guard No Yes CANADIAN CG 1 1W only D Port Operations No Yes PORT OPS 21A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 21B S Port Operations PORT OPS RX only 22A S Canadian Coast Guard Liaison Yes Yes CANADIAN CG D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE 25B S Public Correspondence TELEPHONE RX only D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE D Public Correspondence No Yes TELEPHONE 28B S Public Correspondence TELEPHONE RX only D Public Correspondence No Yes TELEPHONE 61A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 4 Lowrance - Link-5 Operation and Installation Instructions 59

60 62A S Canadian Coast Guard Yes Yes CANADIAN CG D Public Correspondence, Duplex No Yes TELEPHONE 64A S U.S. Government, Canadian Commercial Fishing Yes Yes UNAUTHORIZED 4 65A S Port Operations Yes Yes PORT OPS 66A S Port Operations Yes Yes PORT OPS 1 1W only S Commercial, SAR Yes No COMMERCIAL S Boat Operations, Recreational Yes No SHIP - SHIP S Commercial Fishing Only Yes Yes COMMERCIAL S Digital Selective Calling - DSC DSC S Boat Operations, Recreational Yes Yes PLEASURE S Inter-ship Yes No SHIP - SHIP S Commercial Fishing Only Yes Yes COMMERCIAL S Commercial Fishing Only Yes Yes COMMERCIAL S Port Operations Yes Yes PORT OPS 1 1W only 78A S Boat Operations, Recreational Yes No SHIP - SHIP 79A S Commercial Yes Yes COMMERCIAL 80A S Commercial Yes Yes COMMERCIAL 81A S U.S. Government Operations Yes Yes UNAUTHORIZED 4 82A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED D Canadian Coast Guard Yes Yes CANADIAN CG 83A S U.S. Government, Canadian Coast Guard Yes Yes UNAUTHORIZED 4 83B S Canadian Coast Guard, RX Only CANADIAN CG D Public Correspondence, Marine Operator No Yes TELEPHONE D Public Correspondence, Marine Operator No Yes TELEPHONE D Public Correspondence, Marine Operator No Yes TELEPHONE D Public Correspondence, Marine Operator No Yes TELEPHONE D Public Correspondence, Marine Operator No Yes TELEPHONE Special Notes on Canada Channel Usage 1. LOW POWER (1 W) only. 2. Receive Only. 3. LOW POWER (1 W) initially. Override to HIGH POWER by holding down H/L key before transmitting. Used normally in bridge-to-bridge communications. 4. Lightly shaded simplex channels 21A, 23A, 61A, 64A, 81A, 82A, and 83A cannot be lawfully used in Canada waters unless special authorization is obtained from the Canadian Coast Guard. Not for use by the general public. 60 Lowrance - Link-5 Operation and Installation Instructions

61 5. The letter A illuminated by the channel number indicates the Canada channel is simplex. This same channel is always duplex when selecting International. There is no A reference for International channels. The letter B is only used for some Canadian Receive only channels. 6. Channel 70 is designated for use exclusively for Digital Selective Calling (DSC), such as Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. Note: The CANADA mode is not legal to use in U.S. waters. KEY: S = Simplex operating channel; D = Duplex operating channel. C-4 US & Canada WEATHER Channels CH RX (MHz) TRAFFIC TYPE NAME REMARK WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX NOAA Weather Channel NOAA WX RX only WX CANADIAN Weather Channel CANADA WX RX only WX CANADIAN Weather Channel CANADA WX RX only WX NOAA Weather Channel NOAA WX RX only Lowrance - Link-5 Operation and Installation Instructions 61

62 Appendix D - EU VHF Marine Channel Charts The following channel charts are provided for reference only and may not be correct for all regions. It is the operators responsibility to ensure correct channels and frequencies are used for local regulations. For specific channel information for your country, please refer to local authorities. D-1 EU International Channel Chart CH TX (MHz) RX (MHz) MODE TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP S Inter-ship Safety Yes No SAFETY D Public Correspondence, Port Op No Yes PHONE-PORTOP S Commercial (inter-ship only) Yes No SHIP-SHIP S Inter-ship Yes Yes SHIP-SHIP S Inter-ship Yes Yes SHIP-SHIP S Port Operations Yes Yes PORT OPS S Port Operations Yes Yes PORT OPS S Inter-ship Navigation Safety (bridge-to bridge) Yes No SAFETY COM S Port Operations Yes Yes PORT OPS REMARK S Inter-ship Yes Yes PORT OPS 1 1W only S International Distress, Safety, and Calling Yes Yes DISTRESS S Inter-ship Yes Yes PORT OPS 1 1W only D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP 62 Lowrance - Link-5 Operation and Installation Instructions

63 D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP S Commercial, bridge-to-bridge Yes No SHIP-SHIP S Port Operations Yes No PORT OPS S Inter-ship Yes Yes SHIP-SHIP Digital Selective Calling - DSC DSC S Port Operations Yes Yes PORT OPS S Inter-ship Yes No SHIP-SHIP S Inter-ship Yes Yes SHIP-SHIP S Port Operations Yes Yes PORT OPS S Port Operations Yes Yes PORT OPS 1 1W only S Port Operations Yes Yes PORT OPS 1 1W only S Inter-ship Yes No SHIP-SHIP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP D Public Correspondence, Port Op No Yes PHONE-PORTOP S Port Operations No Yes PORT OPS S Port Operations No Yes PORT OPS 3 Special Notes on EU International Channel Usage 1. LOW POWER (1W) only. 2. Channel 70 is designated for use exclusively for Digital Selective Calling (DSC), such as Distress, Safety, and Ship Calls. No voice communication is allowed on CH70. This channel is only available on DSC enabled radios. 3. Maybe Duplex in some regions KEY: S = Simplex operating channel; D = Duplex operating channel. Lowrance - Link-5 Operation and Installation Instructions 63

64 D-2 Inland Waterways Country Specific table - ATIS ON For specific channel information for your country, please refer to local authorities. CH SPECIFIC FOOT- NOTES TRANSMITTING FREQUENCY (MHZ) SHIP LAND SHIP-TO-SHIP SHIP-TO PORT NAUTICAL INFORMATION 60 a) x 01 a) x 61 a) x 02 a) x 62 a) x 03 a) x 63 a) x 04 a) x 64 a) x 05 a) x 65 a) x 06 a) b) x 66 a) x 07 a) x 67 a) c) x 08 a) q) x 68 a) x 09 a) b) c) x 69 a) x 10 e) x 70 a) Digital selective calling for distress, safety and calling x x x 72 a) r) x 13 f) x 73 f) g) x 14 q) x 74 a) x 15 h) x 75 o) x 16 i) x 76 j) d) o) x 17 h) x 64 Lowrance - Link-5 Operation and Installation Instructions

65 77 a) k) x x x x 79 a) x x x 21 a) x 81 a) x x 82 l) m) x 23 m) x 83 a) m) x 24 m) x 84 m) x 25 m) x 85 a) m) x 26 m) x 86 a) m) x 27 m) x 87 a) d) x 28 m) x 88 a) p) x AIS 1 a) n) AIS 2 a) n) General remarks to Country Specific table: 1 The channels for service categories ship-to-ship and nautical information may also be used for vessel traffic -sys tems by traffic centres. 2 In some countries, frequencies certain channels are used for an other service category or other radio services. These countries are Austria, Bulgaria, Croatia, the Federal Republic of Yugosla via, Hun gary, Moldova, Romania, the Russian Federation, the Slovak Republic, the Czech Republic (with exemption of channels 08, 09, 72, 74 and 86), Ukraine and the Federal Republic of Yugosla via. The Administra tions concerned should make any possible attempt to make these fre quencies channels as soon as possible available for the radiotelephone service on Inland Waterways and/or the required service catego ry. Lowrance - Link-5 Operation and Installation Instructions 65

66 Explanation of specific footnotes in Country Specific table: a. In the countries mentioned under remark 2, it is strictly prohibited to use this channel. b. This channel is not allowed to be used between Rhine km 150 and km 350. c. In the Netherlands, this channel is used by for its on-scene communi cations during safety operati ons on the North Sea, IJsselmeer, Wadden zee, Ooster- and Wester schelde. d. This channel may also be used for piloting, mooring, tugging and for other nautical purposes. e. This channel is the first ship-to-ship channel, unless the competent authority has designated an other channel. In the countries mentioned under remark 2, it is allowed that the output power is set to a value between 6 and 25 W until 1 January f. In the countries mentioned under remark 2, this channel is used for service category ship-to-port authorities. g. In the Netherlands, this channel is used by its national coastgu ard for communicati ons during oil pollution operations on the North Sea and for safety messages for the North Sea, Wadden zee, IJsselmeer, Ooster- and Westerschelde. h. This channel may be used only for service category on-board communications. i. This channel may be used only for communications between sea going vessels and participating land stations in case of distress and safety communica ti ons within the maritime sea-areas. In the countries mentioned under remark 2, this channel may be used only for distress, safety and calling. j. The output power shall be reduced automatically to a value between 0.5 and 1 W. k. This channel may be used for communications with a social charac ter. l. In the Netherlands and Belgium, this channel may be used for trans mit ting mes sages concerning bunkering and victualling. The output power has to be reduced manually to a value between 0.5 and 1 W. m. This channel may also be used for public correspondence. n. This channel will be used for an automatic ship identifi cation and surveillance sys tem (AIS) capable of providing worldw ide operating on seas and Inland Waterways. o. The availability of this channel is on a voluntary basis. All existing equipment shall be capable to of operating on this channel within a ten-year period after the entry into force of this Arrangement. p. After permission of the competent authority, this channel may be used only for spe cial events on a temporary basis. q. In the Czech Republic this channel is used for service category nautical information. r. In the Czech Republic this channel is used for service category ship-to-port authorities. 66 Lowrance - Link-5 Operation and Installation Instructions

67 D-3 Special Channels 2 CH SEND (MHz) RECEIVE (MHz) TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG UK Coast Guard Users Yes Yes UK COAST GRD M UK Marina Channel M1 Yes Yes UK MARINA M UK Marina Channel M2 Yes Yes UK MARINA INT L, Duplex (Holland) No Yes NL MARINA 96H INT L (Belgium) No Yes BEL G MARINA L INT L (Skandinavia) Yes No LEISURE 1 L INT L (Skandinavia) Yes No LEISURE 2 L INT L (Skandinavia not in Denmark) Yes No LEISURE3 F INT L (Skandinavia) Yes No FISHING 1 F INT L (Skandinavia) Yes No FISHING 2 F INT L (Skandinavia) call back Yes No FISHING 3 AIS AIS AIS AIS Note: 1. Lightly Shaded Simplex channel CH00 is only available in the UK to Coast Guard users with written authorization. 2. The special channels above maybe fitted to your radio. These are only licensed for use in the country indicated. No attempt should be made to use them in any other country. Countries of Intended use in the EU: AT - Austria BE - Belgium BG - Bulgaria CY - Cyprus CZ - Czech Republic DK - Denmark EE - Estonia FI - Finland FR - France DE - Germany GR - Greece HU - Hungary IS - Iceland IE - Ireland IT - Italy LI - Liechtenstein LV - Latvia LT - Lithuania LU - Luxembourg MT - Malta NL - Netherlands NO - Norway PL - Poland PT - Portugal RO - Romania SK - Slovakia SI - Slovenia ES - Spain SE - Sweden CH - Switzerland TR - Turkey UK - United Kingdom Lowrance - Link-5 Operation and Installation Instructions 67

68 Appendix E - MMSI, FCC and License Information You must obtain a user MMSI (Marine Mobile Service Identity) and enter it into your radio before you can use the DSC functions. Contact the appropriate authorities in your country. If you are unsure who to contact, consult your Lowrance dealer. The user MMSI is a unique nine digit number, similar to a personal telephone number. It is used on marine transceivers that are capable of using DSC (Digital Select Calling). Depending upon your location, you may need a radio station license for this radio. You may also need an individual operator s license. Lowrance recommends that you check the requirements of your national radio communications authorities before operating DSC functions. To enable the DSC functions in this radio: Enter your valid MMSI: MENU > DSC SETUP > USER MMSI Ensure DSC is turned ON: MENU > DSC SETUP > DSC FUNC FCC Compliance This device complies with Part 15 of the U.S. Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the factory customer service department for help. FCC and IC RF Emissions Notice This radio transceiver when transmitting emits Radio Frequency energy. The FCC and IC have developed guidelines for RF exposure safety. The antenna should be mounted in such a way that it maintains a separation distance as described in the table below from the user or bystanders when transmitting: Separation distance: Antenna system gain: 35 inches (89 cm) 3 dbi 25 inches (63 cm) 0 dbi 68 Lowrance - Link-5 Operation and Installation Instructions

69 Notes: Lowrance - Link-5 Operation and Installation Instructions 69

70

71

72 1177 * *