INAR - RS" IDC INAR - RS TAB INAR - RS PIN INAR - RS EDGE
|
|
|
- Ursula Cooper
- 9 years ago
- Views:
Transcription
1 TERMINALI INAR - RS INAR - RS TERMINALS INAR - RS SCHUHE COSSES INAR - RS TERMINALI INAR - RS IDC INAR - RS IDC TERMINALS INAR - RS IDC COSSES INAR - RS" IDC 8.14 TERMINALI INAR - RS FEMMINA INAR-RS RECEPTACLES TERMINALS INAR - RS HOHLSTECKER CLIPS INAR - RS 8.16 TERMINALI INAR - RS TAB INAR - RS TAB TERMINALS INAR - RS TAB COSSES INAR - RS" TAB 8.19 TERMINALI INAR - RS PIN INAR - RS PIN TERMINALS INAR - RS PIN COSSES INAR - RS" PIN TERMINALI INAR - RS EDGE INAR - RS EDGE TERMINALS INAR - RS EDGE COSSES INAR - RS" EDGE 8.26 TERMINALI INAR - RS SPRING INAR - RS SPRING TERMINALS INAR - RS SPRING COSSES INAR - RS" SPRING 8.28 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
2 TERMINALI INAR - RS IDC INAR - RS IDC TERMINALS INAR-RS IDC COSSES INAR-RS IDC Tab. 1 RS slot - ø IDC slot - mm 2 Filo a Trefoli Lead wire ø Isolante ø Insulation Tipo Type A 1 A 2 L 1 e 0,12 0,40 (AWG 36-26) 0,35 0,75 1,4 2,4 X B 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,35 0,75 1,4 2,4 X B 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,5 1 1,5 2,7 X A 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,35 0,75 1,4 2,4 X B 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,35 0,75 1,4 2,4 X B 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,5 1 1,5 2,7 X A 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,12-0,40 (AWG 36-26) 0,5-1 1,5-2,7 X C 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,25-1,04 (AWG 30-18) 0,5-0,75 2,1-2,5 X C 3,6 0,5 7, Cu Zn 20000x Cu Zn PRE-TIN 0,4 0,6 (AWG 26-22) 0,5 1 AWG ,6 1,05 (AWG 22-18) 0,5 1 AWG ,5 2,7 X B 3,6 0,5 7, Cu Zn Tin Plated (flash NI) 20000x4 1,5 2,7 X A 3,6 0,5 7, Cu Zn Tin Plated (flash NI) 20000x Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
3 TERMINALI INAR - RS FISSACAVO INAR - RS CABLE FASTENING TERMINALS KABELKLEMME INAR-RS COSSES INAR-RS CAVALIERS Tab. 2 ø Isolante ø Insulation A 1 A 2 L 1 e 1,5 2,7 X 3,6 0,5 6, Cu Zn 20000x5 1,5 2,7 X 3,6 0,5 6, Cu Zn 20000x5 1,4 2,4 X 3,6 0,6 6, Cu Zn 20000x5 8 TERMINALI INAR - RS FEMMINA INAR - RS RECEPTACLES INAR-RS HOHLSTECKER CLIPS INAR-RS Tab. 3 Filo a Trefoli - mm 2 Lead wire - mm 2 Spessore maschio Tab thick A 1 A 2 L 1 e 0,12 0,40 (AWG 36-26) 0,5 0,5 3,6 0,5 7, CuZn 50000x4 AWG CuZn PRE-TIN 0,25 1,04 (AWG 30-18) 0,5 0,75 0,5 3,6 0,5 7, CuZn 50000x4 AWG CuZn PRE-TIN 0,12 0,40 (AWG 36-26) 0,5 0,8 3,6 0,5 10, CuZn 50000x2 AWG CuZn PRE-TIN 0,25 1,04 (AWG 30-18) 0,5 0,75 0,8 3,6 0,5 10, CuZn 50000x2 NOTE: it can be product also in version suitable to connect alluminuim magnet wire AWG CuZn PRE-TIN Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
4 TERMINALI INAR - RS FEMMINA INAR - RS RECEPTACLES INAR-RS HOHLSTECKER CLIPS INAR-RS Tab. 4 Filo a Trefoli - mm 2 Lead wire - mm 2 Spessore maschio Tab thick A 1 A 2 L 1 e 0,25 1,04 (AWG 30-18) 0,5 0,75 0,8 3,6 0,5 12, CuZn 50000x2 NOTE: it can be product also in version suitable to connect alluminuim magnet wire AWG CuZn PRE-TIN Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
5 TERMINALI INAR - RS FEMMINA INAR - RS RECEPTACLES INAR-RS HOHLSTECKER CLIPS INAR-RS Tab. 5 Spessore maschio Tab thick A 1 A 2 L 1 e 0,12 0,40 (AWG 36-26) 0,4 3,6 0,5 8, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,4 0,5 3,6 0,5 10, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,5 3,6 0,5 8, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,8 3,6 0,5 8, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 0,8 3,6 0,5 10, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,4 0,5 3,6 0,5 10, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,8 3,6 0,5 10, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 0,8 3,6 0,5 12, Cu Zn 20000x Cu Zn PRE-TIN 8 0,6 1,05 (AWG 22-18) 0,4 0,5 3,6 0,5 10, Cu Zn Tin Plated (flash NI) 20000x4 0,6 1,05 (AWG 22-18) 0,8 3,6 0,5 10, Cu Zn Tin Plated (flash NI) 20000x4 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
6 TERMINALI INAR - RS FEMMINA INAR - RS RECEPTACLES INAR-RS HOHLSTECKER CLIPS INAR-RS Tab. 6 Spessore maschio Tab thick A 1 A 2 L 1 e 0,12 0,40 (AWG ,5 0,8 X 3,7 0, CuZn 3000x CuZn PRE-TIN 0,25 1,04 (AWG 30-18) 0,5 0,8 X 3,7 0, CuZn 3000x CuZn PRE-TIN 0,12 0,40 (AWG 36-26) 0,5 0,8 X 3,7 0, CuZn 3000x5 0,60 1,05 (AWG 22-18) 0,5 0,8 X 3,6 0, Cu Zn Tin Plated (flash NI) 0,25 1,04 (AWG 30-18) 0,5 0,8 X 4,0 0, Cu Zn Tin Plated (flash NI) 3000x5 3000x Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
7 TERMINALI INAR - RS TAB 2,8 INAR - RS TAB TERMINALS 2,8 INAR-RS TAB 2,8 COSSES INA-RS TAB 2,8 Tab. 7 A 1 A 2 A 3 L 1 Senza foro Without hole e 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 12, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 15, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 15,6 X Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 16, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 16,7 X Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 23, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 12, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 15, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 15,6 X Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 16, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 16, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 16,7 X Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 23, Cu Zn 20000x Cu Zn PRE-TIN 8 0,6 1,05 (AWG 22-18) X 3,6 0,5 2,8 16, Cu Zn Tin Plated (flash NI) 20000x4 0,6 1,05 (AWG 22-18) X 3,6 0,5 2,8 16,7 X Cu Zn Tin Plated (flash NI) 20000x4 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
8 TERMINALI INAR - RS TAB 2,8 INAR - RS TAB TERMINALS 2,8 INAR-RS TAB 2,8 COSSES INA-RS TAB 2,8 Tab. 8 A 1 A 2 A 3 L 1 Senza foro Without hole e 0,12 0,40 (AWG 36-26) X 3,6 0,5 2,8 16, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 2,8 16, Cu Zn 20000x4 NOTE: it can be product also in version suitable to connect alluminuim magnet wire Cu Zn PRE-TIN Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
9 TERMINALI INAR - RS TAB 4,8 INAR - RS TAB TERMINALS 4,8 INAR-RS TAB 4,8 COSSES INA-RS TAB 4,8 Tab. 9 A 1 A 2 Tipo Type L 1 e 0,12 0,40 (AWG 36-26) X 3,6 4,8 B 16, Cu Zn 12000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 4,8 B 16, Cu Zn 12000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 4,8 A 16, Cu Zn 12000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 4,8 A 18, Cu Zn 12000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 4,8 A 25, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 B 16, Cu Zn 12000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 B 16, Cu Zn 12000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 A 16, Cu Zn 12000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 A 18, Cu Zn 12000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 A 25, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 4,8 A 25, Cu Zn 10000x Cu Zn PRE-TIN 8 0,40 0,60 (AWG 26-22) X 3,6 4,8 A 16, Cu Zn Tin Plated (flash NI) 12000x4 0,40 0,60 (AWG 26-22) X 3,6 4,8 A 18, Cu Zn Tin Plated (flash NI) 12000x3 0,60 0,80 (AWG 22-20) X 3,6 4,8 A 16, Cu Zn Tin Plated (flash NI) 12000x4 0,60 0,80 (AWG 22-20) X 3,6 4,8 A 18, Cu Zn Tin Plated (flash NI) 12000x3 0,60 1,05 (AWG 22-18) X 3,6 4,8 A 16, Cu Zn Tin Plated (flash NI) 12000x4 0,60 1,05 (AWG 22-18) X 3,6 4,8 A 18, Cu Zn Tin Plated (flash NI) 12000x3 1,0 1,4 (AWG 18-16) X 4 4,8 A 16, Cu Zn Tin Plated (flash NI) 12000x4 1,0 1,4 (AWG 18-16) X 4 4,8 A 18, Cu Zn Tin Plated (flash NI) 12000x3 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
10 TERMINALI INAR - RS TAB 4,8 DOPPI INAR - RS TAB TERMINALS 4,8 DOUBLE INAR-RS TAB 4,8 DOPPELT COSSES INA-RS TAB 4,8 DOUBLES Tab. 10 A 1 A 2 A 3 A 4 L 1 e 0,12 0,40 (AWG 36-26) X 3,6 0,5 4,8 0,8 16, Cu Zn 6000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 4,8 0,8 25, Cu Zn 6000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 4,8 0,8 16, Cu Zn 6000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 4,8 0,8 25, Cu Zn 6000x Cu Zn PRE-TIN Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
11 TERMINALI INAR - RS TAB 6,3 INAR - RS TAB TERMINALS 6,3 INAR-RS TAB 6,3 COSSES INA-RS TAB 6,3 Tab. 11 A 1 A 2 A 3 A 4 L 1 e 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0, Cu Zn 10000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0, Cu Zn 10000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0,8 20, Cu Zn 10000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0,8 20, Cu Zn 10000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0,8 25, Cu Zn 10000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0,8 25, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0,8 20, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0,8 25, Cu Zn 10000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0,8 25, Cu Zn 10000x Cu Zn PRE-TIN 8 0,4 0,6 (AWG 26-22) X 3,6 0,5 6,3 0,8 20, Cu Zn Tin Plated (flash NI) 10000x4 0,4 0,6 (AWG 26-22) X 3,6 0,5 6,3 0,8 20, Cu Zn Tin Plated (flash NI) 10000x4 0,6 1,05 (AWG 22-18) X 3,6 0,5 6,3 0, Cu Zn Tin Plated (flash NI) 10000x4 0,6 1,05 (AWG 22-18) X 3,6 0,5 6,3 0, Cu Zn Tin Plated (flash NI) 10000x4 0,6 1,05 (AWG 22-18) X 3,6 0,5 6,3 0,8 25, Cu Zn Tin Plated (flash NI) 10000x4 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
12 TERMINALI INAR - RS TAB 6,3 PASSO 5 INAR - RS TAB TERMINALS 6,3 RAST 5 INAR-RS TAB 6,3 RAST 5 COSSES INA-RS TAB 6,3 RAST 5 Tab. 12 A 1 A 2 A 3 A 4 L 1 e 0,12 0,40 (AWG 36-26) X 3,6 0,5 6,3 0, Cu Zn 4000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 6,3 0, Cu Zn 4000x Cu Zn PRE-TIN TERMINALI INAR - RS TAB 3,2 INAR - RS TAB TERMINALS 3,2 INAR-RS TAB 3,2 COSSES INA-RS TAB 3,2 Tab. 13 A 1 A 2 A 3 A 4 L 1 e 0,80 1,50 (AWG 20-15) X 4 0,5 3,25 1,13 16, Cu Zn 12000x Cu Zn PRE-TIN 1,0 1,40 (AWG 18-15) X 4 0,5 3,25 1,13 16, Cu Zn Tin Plated (flash NI) 12000x Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
13 TERMINALI INAR - RS PIN INAR - RS PIN TERMINALS INAR-RS PIN COSSES INAR-RS PIN Tab. 14 A 1 A 2 A 3 L 1 e 0,12 0,40 (AWG 36-26) 3,6 0,5 1, Cu Zn 20000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 3,6 0,5 1, Cu Zn 20000x4 [h] Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 3,6 0,5 1,6 14, Cu Zn 20000x4 [h] Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 3,6 0,5 1,2 23, Cu Zn 20000x3 [h] Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 3,6 0,5 1, Cu Zn 20000x4 [h] Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 3,6 0,5 1, Cu Zn 20000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 3,6 0,5 1,6 14, Cu Zn 20000x4 [h] Cu Zn PRE-TIN Nota Note 8 0,6 1,05 (AWG 22-18) 3,6 0,5 1,6 14, Cu Zn Tin Plated (flash NI) [h]: Senza nervatura di rinforzo./without stiffening rib x4 [h] Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
![0,12 0,40 (AWG 36-26) 3,6 0,5 1,6 14,5 0011517001 Cu Zn 20000x4 [h] 0011517101 Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) 3,6 0,5 1,2 23,5 0011727001 Cu Zn 20000x3 [h] 0011727101 Cu Zn PRE-TIN 0,25 1,04](/docs-images/46/21140213/images/page_13.jpg "(AWG 30-18) 3,6 0,5 1,2 13 0011808001 Cu Zn 20000x4 [h] 0011808101 Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 3,6 0,5 1,2 13 0011439001 Cu Zn 20000x4 0011439101 Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) 3,6 0,5")
14 TERMINALI INAR - RS EDGE INAR - RS EDGE TERMINALS INAR-RS EDGE COSSES INAR-RS EDGE Tab. 15 A 1 A 2 A 3 L 1 e 0,12 0,40 (AWG 36-26) X 3,6 0,5 1,5 16, Cu Zn 5000x Cu Zn PRE-TIN 0,12 0,40 (AWG 36-26) X 3,6 0,5 1,5 18, Cu Zn 5000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 1,5 18, Cu Zn 5000x Cu Zn PRE-TIN 0,25 1,04 (AWG 30-18) X 3,6 0,5 1,5 18, Cu Zn 5000x Cu Zn PRE-TIN 0,4 0,6 (AWG 26-22) X 3,6 0,5 1,5 18, Cu Zn Tin Plated (flash Ni) 5000x Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
15 TERMINALI INAR - RS INAR - RS TERMINALS INAR-RS SCHUHE COSSES INAR-RS Tab. 16 A 1 A 2 L 1 e 0,8 1,5 (AWG 20-15) X 4 0,5 9, Cu Zn 15000x Cu Zn PRE-TIN 0,6 1,05 (AWG 22-18) X 3,6 0,5 9, Cu Zn Tin Plated (flash NI) 15000x4 1 1,4 (AWG 18-15) X 4 0,5 9, Cu Zn Tin Plated (flash NI) 15000x4 8 Le dimensioni sono in millimetri, salvo diversamente specificato. Dimensions are in millimeters unless otherwise specified. Le specifiche sono soggette a cambiamenti. Specifications subject to change. Le quote dimensionali riportate sono solo di riferimento
16 TERMINALI INAR - RS SPRING INAR - RS SPRING TERMINALS INAR-RS SPRING COSSES INAR-RS SPRING Tab. 17 A 1 A 2 A 3 L 1 e 0,25 1,04 (AWG 30-18) X 3,6 0,5 2, Cu Zn 6000x3 0,25 1,04 (AWG 30-18) X 3,6 0,5 2, Cu Zn 6000x3 0,25 1,04 (AWG 30-18) X 3,6 0,5 2, Cu Ni Si 6000x3 0,25 1,04 (AWG 30-18) X 3,6 0,5 1,4 21, Cu Zn 6000x3 0,25 1,04 (AWG 30-18) X 3,6 0,5 1,4 21, Cu Ni Si 6000x3 0,6 1,05 (AWG 22-18) X 3,6 0,5 2, Cu Zn Tin Plated (flash NI) 6000x Le dimensioni sono in millimetri, salvo diversamente specificato. Le specifiche sono soggette a cambiamenti. Le quote dimensionali riportate sono solo di riferimento. Dimensions are in millimeters unless otherwise specified. Specifications subject to change.
VERRIEGELBARE PRODUKTE
PRODOTTI ANTISFILAMENTO SECURITY CONNECTIONS PRODUKTE PRODUITS SECURITÉ TERMINALI MULTIPLI ANTISFI- LAMENTO 4,8 TERMINALI FEMMINA DIRITTI ANTISFILAMENTO 6,3 SECURITY STRAIGHT RECEPTA- CLES FOR MULTI-WAY
SERIE 6,3 TERMINALI e CONNETTORI.250 Quick Connect Terminals and Connectors
Descrizione/ Description Connettori utilizzati per giunzioni singole. I terminali maschi e femmina sono della serie 6,3 I connettori sono disponibili anche in materiale -V0 e materiale conforme alla Direttiva
PRESE -SPINE -CAVI A NORME ISO sockets plugs cables ISO standard
PRESE SPINE CAVI A NORME ISO 827175/3 SPINA A 5 POLI 24 V (ABS) 24 V 5 pins plug (ABS) IN MATERIALE TERMOPLASTICO NERO, AGGANCIO RAPIDO, CONTATTI FEMMINA IN OTTONE NICHELATO (CONFORME ISO 7638) Hygrade
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. [email protected] - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
RELAYS E ACCESSORI FUSIBILI E PORTAFUSIBILI
6 RELAYS E ACCESSORI FUSIBILI E PORTAFUSIBILI relays and accessories fuses and fuseholders 103 MICRO RELAYS 12V. PER AUTO 12V micro relays for cars DIMENSIONI / dimensions: 26x15x23 mm COD. ART. 201006
MADE IN ITALY. Sistemi di connessione per fotovoltaico Connection systems for photovoltaic. TÜV certification EN 50521:2008 SC3
Sistemi di connessione per fotovoltaico Connection systems for photovoltaic TÜV certification EN 505:008 SC Tipologia di prodotto Definizione modelli Informazioni Valori nominali Indice Index Datasheet
HAND CRIMP TOOL M22520/2-01
HAND CRIMP TOOL M22520/2-01 This Hand Crimp Tool has been designed for use with the following Datamate crimp sockets (when used with Positioner T5747): M80-0110001... Large bore crimp socket (22 AWG),
LED LENTI E CABLAGGI LED LENSES AND CABLES
80 LED LENTI E CABLAGGI 81 82 LED LENTI E CABLAGGI - NOVITÀ / - NEWS ANGOLO / ANGLE COLORE SUPPORTO PACKAGE COLOUR DIMENSIONI DIMENSIONS 1TN lente quadrupla senza supporto per alloggio MR11 quadruple lens
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
FASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
13/30 SERIES / SERIE 13/30 ADAPTERS / ADATTATORI ADAPTERS ADATTATORI. BELCO SPA, Via Lodi 86 21042 - Caronno Pertusella (VA) - ITALY
13/30 SERIES / SERIE 13/30 ADAPTERS / ADATTATORI ADAPTERS ADATTATORI 4.1/9.5 MALE/MASCHIO - N FEMALE/FEMMINA 4.1/9.5 Contact/Contatto 4.1/9.5: N Contact/ Contatto N: Ni 5µm min. 4.1/9.5 FEMALE/FEMMINA
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
INFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
COB panel supports for multipole connectors
TCQ + TSFS (...CMS, alternative) CMS TSFS Use The system makes it possible to use multipole connectors within electric panels without the traditional metallic housing as protection is assured by the electric
6.0 FIXATION CLIPS. Fixation clips. Fixation clips 6.0. WKK: producer of fixation clips
6.0 Fixation clips Fixation clips 6.0 WKK: producer of fixation clips Through our subsidiary WKK Automotive, WKK has access to its own production facility for the development and production of plastic
AMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
Ring Rod System RING ROD SYSTEM CIRCULAR FRAME. Dial medicali. Prodotti Ultraspecialistici per la Chirurgia Ortopedica
RING ROD SYSTEM CIRCULAR FRAME Ring Rod System Dial medicali RING ROD SYSTEM CIRCULAR FRAME Il sistema RRS è un moderno Fissatore Esterno Circolare che consente di eseguire con componenti semplici e pre-assemblati,
Application Specification SIAMEZE * Standard and 114-13166 Fine Range Terminals 18 Mar 11 Rev C
Application Specification SIAMEZE * Standard and 4-66 Fine Range Terminals 8 Mar Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description
Samba OPLC SM35-J-R20 Installation Guide The Unitronics SM35-J-R20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include: 1 HSC/Shaft-encoder Input, 2 Analog inputs (only
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
HARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
RSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz RSS Installation
QUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs [email protected] BOKU Important considerations Very
Powermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
SOLARE SOLAR TUBI CORRUGATI PER IMPIANTI A PANNELLI SOLARI CORRUGATED TUBES FOR SOLAR PANEL INSTALLATIONS. Set di due tubi corrugati e formabili CSST
E TUBI CORRUGATI PER IMPIANTI A PANNELLI I Set di due tubi corrugati e formabili CSST (Corrugated Stainless Steel Tubing) in acciaio INOX Rivestiti con isolante termico in EPDM espanso a celle chiuse Completi
IMMS-CCC. IMMS-CCC Hardwire Central Interface. Installation Instructions
IMMS-CCC IMMS-CCC Hardwire Central Interface Installation Instructions TABLE OF CONTENTS... Choose a Location... 1 Connections... 2 Operations... 3 Software Configuration... 4 Troubleshooting... 5 Loopback
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool. Tool P/N HT-0095
HT-0095 Mini PV Receptacles 22-32 AWG Crimping Hand Tool Tool P/N HT-0095 FCI MANUAL P/N 415988-001 Issued: Date (03/12/99) Page 1 of 18 HT-0095 Issued: Date (03/12/99) Page 2 of 18 Introduction Table
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
Contenitori Enclosures
- 19 - Contenitori Enclosures Contenitori in materiale termoplastico per ausiliari di comando Ø 22 Thermoplastic enclosures suitable for control units Ø 22 Dati tecnici generali / General Technical Data
PINZE E CAVI AVVIAMENTO. Charging Clips and Booster Cables Pinces Batterie et Cables Demarrage Zangen und Starthilfekabel
Charging Clips and Pinces Batterie et Cables Demarrage Zangen und Starthilfekabel Charging clips 63 AMP. 0A SEZIONE CAVO CABLE SECTION SECTION DU CÂBLE KABEL QUERSCHNITT 6 0 DESCRIZIONE BESCHREIBUNG 0
Assembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
PASSASPINA E VASCHETTE CANCELLERIA CABLE HOLDERS AND STATIONERY TRAYS
S E Z I O N E 0-2 0 1 4 COLORI/FINITURE STANDARD STANDARD COLOURS/FINISHINGS COLORE NERO cod. 09004 BLACK Colour 09004 COLORE ANTRACITE cod. 07016 ANTHRACYTE Colour 07016 art./09004 (34/09004) COLORE GRIGIO
1394 locking cables. Your locking cables for AVT IEEE 1394 cameras
Your locking cables for AVT IEEE 1394 cameras AVT locking cables are ideal for connection of IEEE 1394 cameras in any industrial application. The high quality cables guarantee low damping and best signal
Trailblazer, Envoy, Rainier, Ascender
6. After removing the trim plate bezel simply remove the four ¼ screws holding the instrument cluster in place. Pull the cluster out and unplug the single wiring harness connection in the back. Trailblazer,
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
PX Series. from 18 to 29 m
PX Series from 18 to 29 m The GSR PX series is known for the exceptional strength and rigidity of the aerial platform and its simple and intuitive operation. The high product quality and excellent performance
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
Detector transparent with Color Inserts. FAA 500 TR P Trim Ring transparent with Color Inserts. FCA 500 / FCA 500 E Detector Bases
Detector Color Detector transparent with Color Inserts FAA 500 TR W Trim Ring FAA 500 TR P Trim Ring transparent with Color Inserts FAA 500 BB Ceiling Mount Back Box FCA 500 / FCA 500 E Detector Bases
SCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET
SCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET MODELLO MODEL CAPACITA 1/20 e 1/25 CAPACITY 1/20 and 1/25 INVERSIONE REVERSE ACTION DIAMETRO CESTO DRUM DIAMETER PROFONDITA CESTO
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
AC-3200 ALUMINUM PLATE SYSTEM (DRY JOINT)
ALUMINUM PLATE SYSTEM (DRY JOINT) C D E G P J L A H M B Q F A B C D E F G H J K L M N P Q R HORIZONTAL JOINT DETAIL VERTICAL JOINT DETAIL COPING DETAIL (1) COPING DETAIL (2) COPING DETAIL (3) OUTSIDE CORNER
RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. 0.
Receiver AC-RX2/CS RF data receiver super-reactive ASK modulation, low cost and low consumption ideal for Microchip HCS KEELOQ decoder/encoder family. Pin-out 38.1 3 Component Side 1 2 3 7 11 13 14 15
ELECTRONIC LOCKING SYSTEMS
ELECTRONIC LOCKING SYSTEMS Electronic Locking Systems Electronic locks for display cases, lockers and sliding doors This small intelligent electronic cabinet lock has a wide range of uses. Based on a
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION
MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION Part Number: 99821002 Rev 21 FEBRUARY 2011 REGISTERED TO ISO 9001:2008 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301
Emergency lighting units EM powerled
M BASIC 1 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing SEV for output voltage < 60 V DC ow-profile casing (21 x 30 mm cross-section) 5-year
SAFE. DESIGNED in italy CASSEFORTI PER HOTEL HOTEL SAFES
SAFE DESIGNED in italy CASSEFORTI PER HOTEL HOTEL SAFES SAFE TOP OPEN SAFE DRAWER Innovativa tastiera touch e display led integrato nella porta New touch keypad and stealthy LED display L apertura dall
NS. COD. CODE COMPATIBILE COMPATIBLE. DIM. EST. mm EXT. SIZE mm DESCRIZIONE / DESCRIPTION IMMAGINE / IMAGE. Alpeninox 600090 Zanussi 0A8039
02315 600090 0A8039 Canotto portamolla per armadi Spring sleeve for cabinets 02314 935318 Canotto inox per armadi ARMNSC Stainless steel sleeve for cabinets ARMNSC 02319 Surfrigo Perno per canotto Spring
Quick Reference Guide AMP CT Connector Series
Quick Reference Guide The AMP CT connectors are a miniature wire-to-board and wire-to-wire interconnect solution. The AMP CT connector series has proven performance in its harness making capability. A
Pin/terminal: Wire protect: Screw/torque: Dubilier Connectors. Plan Pin Dia 1.0 Rec-hole Size 1.1. Pin/terminal: Wire protect: Screw/torque:
TERMINA BOCKS mm PITCH VERTICA MOUNT mm Pitch and 3 pole interlocking 4- pole solid, end stackable U94v-0 Flame retardant material.mm wire acceptance U/VDE approved Screw terminal 7.A/380V Dielectric Strength:
PIDG FASTON Receptacles and Tabs
Product Facts Pre-insulated terminal designed for complete and uniform reliability in the most difficult circuit environment Consists of an unplated or tin plated brass body or a tin plated phosphor bronze
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
SAFE TOP OPEN. Sistema di chiusura Locking system
SAFE: I MODELLI SAFE: MODELS SAFE TOP OPEN Innovativa tastiera touch e display led integrato nella porta New touch keypad and stealthy LED display L apertura dall alto permette un ergonomico accesso al
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
Rack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
Complete units. Complete underfloor box for one Modul 45 socket and two data connection sockets. Complete service outlets
Complete underfloor box for one Modul 45 socket and two data connection sockets Screed height 105-165 mm In the field of complete service outlets, the GE 1 and GET 1 models are a universal, high-quality
Delivering solutions. Since 1985 Eltra is present in the market of encoders and industrial automation both nationally and in foreign Countries.
Delivering solutions Since 1985 Eltra is present in the market of encoders and industrial automation both nationally and in foreign Countries. During these years the company constantly grew extending its
Premium CERTI-CRIMP II Hand Tools
Premium CERTI-CRIMP II Hand Tools Fast Facts Designed to exacting specifications Ratchet control provides complete crimping cycle For most military, UL and CSA applications Manufactured using the highest
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
THE ADVANTAGES ARE YOURS
THE ADVANTAGES ARE YOURS The new switches/discrepancy switches "R0-DR0" have special characteristics that make them very different from the normal switches on the market. Listed below are some of the many
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 [email protected] in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
gesis IP + Heavy Duty Class I, Zone 2
gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas
MANIGLIE INCASSO FLUSH HANDLES
Materiale: Cromall Material: Cromall Spessore porta da 40 a 5mm Door thickness from 40 to 5mm Orolucido. Polished brass Oromat. Mat gold Orolucido. Polished brass Oromat. Mat gold ENTER Design: Luca Colombo
Anodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
The PCB Terminal Blocks Model Pitch(mm) Model Pitch Model Pitch Model Pitch DG300 DG360 DG166 DG500 DG301 DG365 DG103 DG500H DG305 DG332K DG128
Model Pitch(mm) Model Pitch Model Pitch Model Pitch DG300 5,10 DG360 7.5 DG166 5 DG500 5,5.08 DG301 5,10 DG365 7.5 DG103 5,10 DG500H 5,5.08 DG305 5,10 DG332K 5,10 DG128 5,7.5 DG500A 5,5.08 DG306 5,10 DG332J
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
MGE TM Galaxy TM 7000
MGE TM Galaxy TM 7000 160-500 kva Battery circuit-breaker enclosures Installation manual 34021529EN/AH - Page 2 Introduction Thank you for selecting an APC by Schneider Electric product to protect your
CURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X
CURRENT TRANSFORMER MODEL 546 1.10" I.D. PAGE No 1-38 REV 15DEC00 TERMINAL OPTION LEAD WIRE OPTION 1.10 0 1.20 2.55 3.00 3.47 0.18 x 0.31 SLOT ( 2 PLACES) 8-32 BRASS STUD (2 PLACES) UL1015 #16 AWG LEAD
RoHS. AMPMODU Interconnection System. European Standard Products. Ready
RoHS Ready AMPMODU Interconnection System European Standard Products 1 TYCO ELECTRONICS TECHNOLOGY PORTFOLIO Connector Systems / Electromechanical Components Relays Wireless Antennas, GPS Antennas, Integrated
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
COAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
RoHS. Heavy Duty Sealed Connector Series (HDSCS) Ready. for Industrial & Commercial Vehicles
RoHS Ready Heavy Duty Sealed Connector Series (HDSCS) for Industrial & Commercial Vehicles Industrial & Commercial Transportation When every connection counts, TE Connectivity delivers reliable connectivity
How to choose the very best connectors for your speaker cables and enjoy superb sound from your music system
Not all speaker plugs sound the same How to choose the very best connectors for your speaker cables and enjoy superb sound from your music system By Graham Nalty MA Not all speaker plugs sound the same
The range of rail-mounted terminal blocks. for a perfect electrical installation.
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
Wiring channel Table Tab.1
LAMBDA CONTROLLER HARNESS "ANALOG - RS" version Wiring channel Table Tab. PIN AMP Connector Section [mm²] Analog + RS pin LAMBDA OUT RS PC RX RS PC TX 0 cm 0. Power Free wires +VBATT 00 cm. Lambda yellow
UniStream CPU-for-Panel
UniStream CPU-for-Panel Installation Guide USC-P-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for industrial automation. This guide provides basic
Innovative Engineering Solutions. Terminal Blocks
Innovative Engineering Solutions Terminal Blocks Contents Selection Guide.... 2 TERMINAL BLOCKS ] Single Row SE/SEI............................................... 6 32500... 8 37000/38000... 10 CB/CFT...
Dimensioni in millimetri. Dimensions shown in millimetres. max 4.0 mm 2 (bussola a vite screw terminals) 0.5 mm 2-1.5 mm 2
PATENTED IP68 HIGH PROTECTION AND CONNECTOR. 2-3-5-6 POLES. Dimensioni in millimetri. Dimensions shown in millimetres. Dati generali General data Dati tecnici Technical data N. poli 2 3 5 6 N. poles Terminali
Directions for use : Dosing chutes type DSX.
Pag. 1-10 Directions for use : Dosing chutes type DSX. Introduction The linear vibrations of STILETTO consist of a drive part and a movable part which are connected to leave springs. The purpose of the
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
Fishtapes and accessories
ANGUILA Sonde passacavi ed accessori Fishtapes and accessories ANGUILA Guida per la scelta della sonda appropriata all uso Guide to choice the right fishtape to the use Materiale Ø sonda Facilità di curvatura
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : [email protected] Solid-State Timer Low-Cost, Plug-In