Technical Manual Index August 1, 2016
|
|
- Jasmin Warner
- 7 years ago
- Views:
Transcription
1 Technical Manual Index August 1, 2016 The CF6 Technical Manual Index has been reformatted as follows: Manuals and Supporting Manuals - Section 1 EM DVDs ( Manuals) Section 2 PP IPCs (Powerplant Illustrated Parts Catalogs) Section 3 Supplementary Support Manuals Section 4 BAE General Practices Manual Sections AR in the Next Rev Column indicates As Required. An asterisk (*) behind the indicates the manual has been revised since the last issue of the Technical Manual Index. Questions or comments concerning this publication should be directed to Fleet Support toll free within the U.S. (877) or outside the U.S. (513) or aviation.fleet.support1@ge.com. Supplementary Manuals are available by contacting Fleet Support aviation.fleet.support1@ge.com. GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO aviation.fleet.support1@ge.com. THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: cs-customer.service@baesystems.com. The following disclosure notice is to inform you of your obligations as a recipient of technical information under U.S. Export Laws: THE INFORMATION CONTAINED IN THIS DOCUMENT IS GE PROPRIETARY INFORMATION AND IS DISCLOSED IN CONFIDENCE. IT IS THE PROPERTY OF GE AND SHALL NOT BE USED, DISCLOSED TO OTHERS OR REPRODUCED WITHOUT THE EXPRESS WRITTEN CONSENT OF GE, INCLUDING, BUT WITHOUT LIMITATION, IT IS NOT TO BE USED IN THE CREATION, MANUFACTURE, DEVELOPMENT, OR DERIVATION OF ANY REPAIRS, MODIFICATIONS, SPARE PARTS, DESIGN, OR CONFIGURATION CHANGES OR TO OBTAIN FAA OR ANY OTHER GOVERNMENT OR REGULATORY APPROVAL TO DO SO. IF CONSENT IS GIVEN FOR REPRODUCTION IN WHOLE OR IN PART, THIS NOTICE AND THE NOTICE SET FORTH ON EACH PAGE OF THIS DOCUMENT SHALL APPEAR IN ANY SUCH REPRODUCTION IN WHOLE OR IN PART. THE INFORMATION CONTAINED IN THIS DOCUMENT MAY ALSO BE CONTROLLED BY U.S. EXPORT CONTROL LAWS. UNAUTHORIZED EXPORT OR RE-EXPORT IS PROHIBITED. Page 1/1
2 GEK # CF6 Technical Manual Index August 1, 2016 Manual DVDs Next CF6-6/-50/-80A/- 80C2/-80E1 DVD Contents: Standard Practices Manual GEK 9250 R105 Ver /01/16 04/01/ CF6-6 DVD Contents: Manual GEK 9266 R97 Illustrated Parts Catalog GEK R104 Service Bulletins Issued after 1994 Ver /15/15 10/15/ CF6-50 DVD Contents: Manual GEK R86* Illustrated Parts Catalog GEK R112* Service Bulletins Issued after 1994 Ver 8.7* 07/15/16 07/15/ CF6-80C2 Boeing Version CF6-80C2 Airbus Version DVD Contents: Manual GEK R84 Illustrated Parts Catalog GEK (PMC) R71 Illustrated Parts Catalog GEK (FADEC) R71 Service Bulletins Issued after 1994 DVD Contents: Manual GEK R84 Illustrated Parts Catalog GEK ( PMC) R75 Illustrated Parts Catalog GEK ( FADEC) R44 Service Bulletins Issued after 1994 Ver /01/16 12/01/16 Ver /01/16 12/01/16 SECTION 1 Page 1/2
3 GEK # CF6 Technical Manual Index August 1, 2016 Manual DVDs Next CF6-80C2 McDonnell Douglas Version DVD Contents: Manual GEK R84 Illustrated Parts Catalog GEK ( FADEC) R60 Service Bulletins Issued after 1994 Ver /01/16 12/01/16 CF6-80C2 ALL ****All Version is only available on mygeaviation**** 06/01/16 12/01/ CF6-80A/A2 Boeing Version DVD Contents: Manual GEK R85 Illustrated Parts Catalog GEK R70 Service Bulletins Issued after 1994 Ver /15/16 02/15/ CF6-80A1/A3 Airbus Version DVD Contents: Manual GEK R85 Illustrated Parts Catalog GEK R69 Service Bulletins Issued after 1994 Ver /15/16 02/15/ CF6-80E1 DVD Contents: Manual GEK R43 Illustrated Parts Catalog GEK R56 Service Bulletins Issued after 1994 Ver /15/16 09/15/16 SECTION 1 Page 2/2
4 Book #/GEK # CF6 Technical Manual Index August 1, 2016 Powerplant Illustrated Parts Catalogs Next CF6-80A1/A3 GEK A310 CF6-80A1/A3 67 2/15/16 02/15/ DLH CF6-80A3 GEK DLH (Lufthansa) A310 CF6-80A3 58 2/15/16 02/15/17 Book CF6-80C2 GEK A300/A310 CF6-80C2A /01/16 12/01/16 Book AIC CF6-80C2 GEK AIC (Air India) A310 CF6-80C2A /01/16 12/01/16 SECTION 2 Page 1/4
5 Book #/GEK # CF6 Technical Manual Index August 1, 2016 Powerplant Illustrated Parts Catalogs Next Book CF6-80C2 GEK AFR (Air France) GEK CES (China Eastern) GEK CSA (Ceskoslovenske Aerolinie) GEK CYP (Cyprus) GEK DLH (Lufthansa) GEK EYT (Europe Aero Service GEK GAF (German Airforce) GEK HLF (Hapag Lloyd) GEK HMSF (HM The Sultan s Flight) GEK RJA (Royal Jordanian) GEK SOM (Somali) GEK SUD (Sudan) GEK TAC (Thai Airways) GEK TAP (Portugal) GEK TEA (Trans European) GEK THY (Turkish Airlines) A310 CF6-80C2A /01/16 12/01/16 Book DLH CF6-80C2 GEK DLH (Lufthansa) A300 CF6-80C2A /01/16 12/01/16 SECTION 2 Page 2/4
6 Book #/GEK # CF6 Technical Manual Index August 1, 2016 Powerplant Illustrated Parts Catalogs Next Book THA CF6-80C2 GEK THA (Thai International) A300 CF6-80C2A1/A /01/16 12/01/16 Book CF6-80C2 GEK AAL (American Airlines) GEK CES (China Eastern) GEK CYM (Compass) GEK KAC (Kuwait Airways) GEK MON (Monarch) GEK OAL (Olympic Airways) GEK TAR (Tunisair) A300 CF6-80C2A /01/16 12/01/16 Book PIA CF6-80C2 GEK PIA (Pakistan) A310 CF6-80C2A /01/16 12/01/16 Book CF6-80C2 GEK KAC (Kuwait) GEK UAE (Emirates) A310 CF6-80C2A2/A /01/16 12/01/16 SECTION 2 Page 3/4
7 Book #/GEK # CF6 Technical Manual Index August 1, 2016 Powerplant Illustrated Parts Catalogs Next Book CF6-80C2 GEK AHK (Air Hong Kong) GEK FDX (Federal Express) A300 CF6-80C2A5F 44 06/01/16 12/01/ CF6-80E1 GEK A330 CF6-80E1A2A /15/16 09/15/16 SECTION 2 Page 4/4
8 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISED AS REQUIRED AND ARE AVAILABLE BY CONTACTING FLEET SUPPORT GEK # AIRLINE TEST CELL EQUIPMENT MANUALS CF6-6/-50 Airline Test Cell Equipment Manual 3 03/01/74 CF6-50/-80A Airline Test Cell Equipment Manual 3 07/01/84 CF6-80C2 Airline Test Cell Equipment Manual Basic 11/15/85 CONTROL SYSTEM TIME LIMITED DISPATCH SUMMARIES CF6-80C2BF Boeing / Control System Time Limited Dispatch Summary 14 04/ CF6-80C2D1F MD11 Control System Time Limited Dispatch Summary 8 03/ CF6-80E1 A330 Control System Time Limited Dispatch Summary 9 12/ CF6-80C2AF A Control System Time Limited Dispatch Summary 3 10/06 SECTION 3 Page 1/5
9 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISED AS REQUIRED AND ARE AVAILABLE BY CONTACTING FLEET SUPPORT GEK # CF6-80C2L1F Lockheed Martin C5 Application Control System Time Limited Dispatch Summary 1 10/07 FACILITY PLANNING MANUALS CF6-6/-50 Facility Planning Manual 31 05/01/80 CF6-80A Facility Planning Manual Basic 09/30/81 ILLUSTRATED TOOL AND EQUIPMENT MANUALS CF6-6/CF6-50 Illustrated Tool and Equipment Manual 46 10/01/86 CF6-80A Illustrated Tool and Equipment Manual 4 09/01/86 CF6-80C2 Illustrated Tool and Equipment Manual 7 12/01/14 CF6-80E1 Illustrated Tool and Equipment Manual 4 11/01/15 INSTALLATION MANUALS SECTION 3 Page 2/5
10 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISED AS REQUIRED AND ARE AVAILABLE BY CONTACTING FLEET SUPPORT GEK # CF6-6 Installation Manual Basic 03/31/85 CF6-50 Installation Manual Basic 04/01/80 CF6-80A/A2 Installation Manual 2 09/01/83 CF6-80A1/A3 Installation Manual 2 09/01/83 CF6-80C2 PMC Installation Manual 7 03/31/98 CF6-80C2AF/BF/DF FADEC Installation Manual 13 08/23/13 CF6-80C2L1F Installation Manual 1 02/14/12 CF6-80C2K1F Installation Manual 1 10/31/12 CF6-80E1 Installation Manual 5 06/01/15 NONDESTRUCTIVE TESTING MANUALS CF6-6 Nondestructive Testing Manual 21 04/01/88 SECTION 3 Page 3/5
11 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISED AS REQUIRED AND ARE AVAILABLE BY CONTACTING FLEET SUPPORT GEK # CF6-50 Nondestructive Testing Manual 27 07/01/87 CF6-80A Nondestructive Testing Manual 3 11/15/86 CF6-80C2 Nondestructive Testing Manual 3 08/31/93 CF6-80E1 Nondestructive Testing Manual Basic 06/30/93 MISCELLANEOUS MANUALS CF6-50 Locally Fabricated Tools for CF6-50E/747 Boeing Application 3 08/01/ CF6-50 Compressor Rotor EROM Fixture Manual 3 03/01/ CF6-6/-50 EGT System Tester Instruction Manual 1 01/15/ CF6-6/-50 Operation Manual for Spectro Dynamics Fiber Optic One Per Revolution Basic 06/15/ CF6-80C2BF/DF FADEC System Description Document Basic 05/15/89 SECTION 3 Page 4/5
12 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISED AS REQUIRED AND ARE AVAILABLE BY CONTACTING FLEET SUPPORT GEK # CF6-80C2 External Configuration Hardware Handbook 1 05/15/ CF6-80C2 Boeing FADEC ECU Pre-PIP Wiring Harness Manual Basic 02/15/ CF6-80C2 Boeing FADEC ECU PIP Wiring Harness Manual Basic 03/15/91 CF6-80C2/CF6-80E1 Combustor: Borescope Inspection Guide 3 April 2013 SECTION 3 Page 5/5
13 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK (SECTION) CF6 ALL MODELS GENERAL PRACTICES MANUAL SECTIONS CF6 ALL MODELS General Information 7 03/22/12 CF6 ALL MODELS Safety Instructions 6 03/24/11 CF6 ALL MODELS Equivalent Tools, Materials, and Procedures 6 09/15/11 CF6 ALL MODELS Soldering 6 11/17/11 CF6 ALL MODELS Soldering and Desoldering Equipment Calibration 6 11/17/11 CF6 ALL MODELS Circuit Card Assembly Soldering 6 11/17/11 CF6 ALL MODELS Microcircuit Soldering 6 11/17/11 CF6 ALL MODELS Terminal Connection 6 11/17/11 CF6 ALL MODELS Hand Soldering 6 11/17/11 CF6 ALL MODELS Manual Tinning Process 6 11/17/11 SECTION 4 Page 1/6
14 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK CF6 ALL MODELS Surface Mounted Component Soldering 7 08/01/14 CF6 ALL MODELS Ball Grid Array Component Soldering 6 11/17/11 CF6 ALL MODELS General Repair 6 11/17/11 CF6 ALL MODELS Identification Marking 7 11/18/15 CF6 ALL MODELS Safety Wiring 6 11/17/11 CF6 ALL MODELS Threaded Insert Repair 7 07/01/15 CF6 ALL MODELS Out-of-Round Connector Repair 6 11/17/11 CF6 ALL MODELS Potting of Connectors 6 11/17/11 CF6 ALL MODELS Component Substitution 6 11/17/11 CF6 ALL MODELS Chemical Thread-Locking 6 11/17/11 CF6 ALL MODELS Circuit Card Assembly Repair 6 11/17/11 SECTION 4 Page 2/6
15 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK CF6 ALL MODELS Part Removal 7 06/20/14 CF6 ALL MODELS Part Installation 6 11/17/11 CF6 ALL MODELS Part Replacement 7 07/22/14 CF6 ALL MODELS General Laminate, Conductor Repair 8 12/10/14 CF6 ALL MODELS Modification of Internal Circuits 6 11/17/11 CF6 ALL MODELS Solder Mask Repair 6 11/17/11 CF6 ALL MODELS ESD Label Replacement 6 11/17/11 CF6 ALL MODELS Gold Pin Replacement 6 11/17/11 CF6 ALL MODELS Terminal Strip Repair 6 11/17/11 CF6 ALL MODELS Bonding and Encapsulating 6 11/17/11 CF6 ALL MODELS Epoxy Bonding 7 06/27/13 SECTION 4 Page 3/6
16 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK CF6 ALL MODELS Epoxy Bonding (High Temperature) 6 11/17/11 CF6 ALL MODELS RTV Application 6 11/17/11 CF6 ALL MODELS Protective Coatings 6 11/17/11 CF6 ALL MODELS Removal of Conformal Coatings 6 11/17/11 CF6 ALL MODELS Recoating Conformal Coated Repaired Areas 8 05/15/15 CF6 ALL MODELS Aluminum Surface Touch-up with Chromate Solution 6 11/17/11 CF6 ALL MODELS Painted Surface Repair 6 11/17/11 CF6 ALL MODELS Electrostatic Discharge Control 6 11/17/11 CF6 ALL MODELS ESD Equipment Calibration 6 11/17/11 CF6 ALL MODELS Handling ESDS Devices 6 11/17/11 CF6 ALL MODELS Moisture Sensitive Devices 6 11/17/11 SECTION 4 Page 4/6
17 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK CF6 ALL MODELS Moisture Sensitive Device Preparation 6 11/17/11 CF6 ALL MODELS Flexible Circuit Card Assembly Repair 6 11/17/11 CF6 ALL MODELS Connector Removal and Replacement 6 11/17/11 CF6 ALL MODELS Magnetic Media and Software 6 11/17/11 CF6 ALL MODELS Media Storage Precautions 6 11/17/11 CF6 ALL MODELS Record Keeping and Configuration Control 6 11/17/11 CF6 ALL MODELS Electrical Wiring 6 11/17/11 CF6 ALL MODELS Wiring and Cable Lacing 6 11/17/11 CF6 ALL MODELS Crimped Electrical Connection 7 06/15/15 CF6 ALL MODELS Shielded Wire Processes 6 11/17/11 CF6 ALL MODELS Wire Preparation Processes 6 11/17/11 SECTION 4 Page 5/6
18 General Practices Manual GENERAL PRACTICES MANUAL SECTIONS ARE AVAILABLE FOR FIRST TIER CUSTOMERS UPON REQUEST. PLEASE SUBMIT YOUR REQUEST TO THE SECTIONS ARE REVISED INDIVIDUALLY. THE SECTIONS ARE ALSO AVAILABLE ON THE BAE WEBSITE OR FROM BAE BY CONTACTING: GEK CF6 ALL MODELS Chassis Repairs 6 11/17/11 CF6 ALL MODELS Broken Screw Removal 6 11/17/11 CF6 ALL MODELS Chassis Dent and Scratch Repair 6 11/17/11 CF6 ALL MODELS Chassis Surface Weld Area Repair 6 11/17/11 CF6 ALL MODELS Chassis Surfaces Repair 6 11/17/11 CF6 ALL MODELS Aluminum Surface Repair by Chemical Weld Application 6 11/17/11 CF6 ALL MODELS Threaded Insert Overhaul 7 04/22/14 SECTION 4 Page 6/6
INSPECTION IN-PROCESS AND FINAL QUALITY ASSURANCE
INSPECTION IN-PROCESS AND FINAL QUALITY ASSURANCE 1.0 SCOPE: The purpose of this procedure is to document mandatory to ensure compliance to Project Requirements. inspection points and 2.0 REFERENCE DOCUMENTS:
More informationMTU Maintenance Dallas, Inc. Integrated Management System. MM 03D-03 Capability List Manual
Chapter 0 Page 2 of 15 0.1 Table of Contents 0 Title Page... 1 0.1 Table of Contents... 2 0.2 List of Effective Pages... 3 0.3 Record of Revision... 4 0.4 Reserved.........5 0.5 Distribution List... 6
More informationIPC Certification Centre
A DVANCED REWORK TECHNOLOGY LTD IPC Certification Centre IPC-A-610D Training and Certification Programme (Revision D Training) Certified Trainer Application Specialist IPC J-STD-001D Training and Certification
More informationTRAINING SERVICES. Training Courses Curriculum Development Highly Skilled Staff. Training Courses Curriculum Development Highly Skilled
TRAINING SERVICES Training Courses Curriculum Development Highly Skilled Staff Training Courses Curriculum Development Highly Skilled Staff 256-705-5528 www.stielectronicsinc.com Training Courses Hands-on
More informationAcceptability of Printed Circuit Board Assemblies
Section No.: 12I.2.3, Sheet 1 of 9 Rev Level: 16 Additional Distribution: PCB Assembly Subcontractors 1.0 Purpose 2.0 Scope Acceptability of Printed Circuit Board Assemblies 1.1 The purpose of this standard
More informationL-3 Communications Corporation AMI Purchase Order Supplement No. 3 Quality Assurance
Q10 QUALITY SYSTEM REQUIREMENTS Q10A Q10B ISO 9001:2008 Seller s quality system shall be in compliance with the requirements of ISO 9001, Model for in Design, Development, Production, Installation and
More informationAmphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial
Amphenol Sincere Health Care Aerospace Heavy Equipment HEV Industrial Electronic Integration & Flexible Printed Circuits About Amphenol The second largest manufacturers of interconnect products 87 worldwide
More informationSOLDERING ELECTRICAL AND ELECTRONIC EQUIPMENT
Sheet 1 of 6 SOLDERING OF ELECTRICAL AND ELECTRONIC EQUIPMENT EXPORT CONTROLLED - WARNING This document may contain information that is subject to the International Traffic in Arms Regulations (ITAR) or
More informationSupplier Quality Requirements and Clauses
Supplier Quality Requirements and Clauses Supplier Quality Requirements General The following Quality Notes (QN01 through QN19) apply to and form a part of all Purchase Orders issued by Advanced Conversion
More informationDRAM Memory Modules. Pentium (Use gold-plated SIMMs) Memory Module
Instructions D Memory Modules (For 6180 Industrial Computers with Pentium and Pentium II Processors) This document describes how to add Memory to the 6180 Computer processor board. Topics include: Available
More informationCACRC - Repair Techniques Task Group
Repair Techniques Task Group Status Report Future plans WICHITA NOV 2007 1 WHY DO WE NEED TO STANDARDIZE REPAIR TECHNIQUES The Airlines have multi-airframe, multi-engine fleets NEEDS To be able to use
More informationMSSI Service Bulletins. Page 1
Bulletin # REV DATE PART # AIRCRAFT DESCRIPTION 1011-26-18 1 01/29/1975 1011B-1 B727 ENG MODIFIES 1011B-1 TO 1011C TO PREVENT TRANS. VOLTAGE DAMAGE. EFFECT. S/N 2500 THRU 2792. 26-01 0 06/01/1964 B727
More informationTBM5, TBM5-S and TBM5-SV
TBM5, TBM5-S and TBM5-SV Compression Tool Instructions Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Table of Contents 1.0 Operating
More informationCo-location Interconnect Power Panel (CIPP) Installation Guide
Co-location Interconnect Power Panel (CIPP) Installation Guide Document INS-97xxxxxxx This guide covers the following part numbers- Trimm 97xxxxxxx Series Table of Contents Section 1 - General Information...
More informationUniversal Vehicle Power Supply 9007AX01. Installation Instructions
Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in
More informationENGINEERING RELEASE MODEL: LEARJET MODEL 20 AND 35/36 SERIES DRAWING. NO.: 02907011 SHEET: 1 OF 1
ENGINEERING RELEASE DRAWING. NO.: 02907011 MODEL: LEARJET MODEL 20 AND 35/36 SERIES SHEET: 1 OF 1 Butler National Corporation Olathe, Kansas DRAWING TITLE: INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR
More informationMEA262B Modify/repair aircraft component single layer printed circuit boards
MEA262B Modify/repair aircraft component single layer printed circuit boards Revision Number: 2 MEA262B Modify/repair aircraft component single layer printed circuit boards Modification History Minor formatting
More informationWhite Paper. Modification of Existing NEBS Requirements for Pb-Free Electronics. By Craig Hillman, PhD
White Paper Modification of Existing NEBS Requirements for Pb-Free Electronics By Craig Hillman, PhD Executive Summary Thorough review of the relevant NEBS requirements identified several areas of concerns
More information[Docket No. FAA-2015-1273; Directorate Identifier 2014-NM-194-AD; Amendment 39-18530; AD 2016-11-03]
[Federal Register Volume 81, Number 105 (Wednesday, June 1, 2016)] [Rules and Regulations] [Pages 34867-34871] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationWorkmanship Standards Personnel Training and Certification Explained. Jeannette Plante. NASA Workmanship Standards Program Manager
Workmanship Standards Personnel Training and Certification Explained Jeannette Plante NASA Workmanship Standards Program Manager Personnel training and certification is the most recurrent compliance audit
More informationEuropean Aviation Safety Agency. Engine Type Certificate Data Sheet EASA.IM.E.002
European Aviation Safety Agency Engine Type Certificate Data Sheet EASA.IM.E.002 Issue: 2 Date: 16 March 2004 Type: GE Aircraft Engines GE90 Series Engines Section 1, page 3 Section 2, page 9 GE90-76B
More information[Docket No. FAA-2009-0411; Directorate Identifier 2008-NM-190-AD; Amendment 39-16095; AD 2009-24-07]
[Federal Register: November 27, 2009 (Volume 74, Number 227)] [Rules and Regulations] [Page 62231-62233] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr27no09-12] DEPARTMENT
More informationMCR1900 Media Converter 19-Slot Chassis
MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the
More informationEvery idea starts with ABC. Electronic Contract Manufacturing Cables and Harnesses System Integration Assembly Engineering
Every idea starts with ABC Electronic Contract Manufacturing Cables and Harnesses System Integration Assembly Engineering ABC Assembly offers a dynamic approach to the electronics industry. We are a full-service
More information7.1 Safety Precautions-Aircraft and Workshop 3 3 3. 7.2 Workshop Practices 3 3 3
Note: This module does not apply to category B3. Relevant subject matters for category B3 are defined in module 7B. 7.1 Safety Precautions-Aircraft and Workshop 3 3 3 Aspects of safe working practices
More informationBODi rs BD004 Series Bandwidth-on-Demand Internet with Reliability and Survivability. Quick Start Guide NOTES
NOTES BODi rs BD004 Series Bandwidth-on-Demand Internet with Reliability and Survivability Quick Start Guide This is a Class A device and is not intended for use in a residential environment. Important
More informationInstallation Guide. Wyse D Class 4-GB RAM Upgrade Option Kit. Products: D90D7, D90DW. Issue: 121312 PN: 883884-35L Rev. A
Installation Guide Wyse D Class 4-GB RAM Upgrade Option Kit Products: D90D7, D90DW Issue: 121312 PN: 883884-35L Rev. A Copyright Notices 2012, Wyse Technology Inc. All rights reserved. This manual and
More informationNORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS
SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications
More informationOverview. Building Partnerships for Tomorrow... INTRODUCTION. Houston
Overview INTRODUCTION Established in 1995, Suntronic is a diversified Electronic Manufacturing Service provider supporting the oil and gas, medical devices, industrial controls, semiconductor, military,
More informationAbout the BitStorm 6051 POTS Splitter
BitStorm 6051 Installation Instructions Document Number 6051-A2-GZ40-10 July 2002 About the BitStorm 6051 The BitStorm system enables simultaneous high-speed digital data access and analog voice service
More informationIntel RAID Maintenance Free Backup Unit 4 Quick Installation User's Guide
Intel RAID Maintenance Free Backup Unit 4 Quick Installation User's Guide Thank you for buying an Intel RAID Maintenance Free Backup Unit 4. The Intel RAID Maintenance Free Backup Unit 4 supports the Intel
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More informationPart-66 and AMC/GM rev. May 2012 GM 66.A.20(a) Privileges GM 66.A.20(a) Privileges 1. The following definitions apply: Electrical system means the aircraft electrical power supply source, plus the distribution
More informationProduct Order Quality Requirements Meggitt (Orange County), Inc.
Product Order Quality Requirements Meggitt (Orange County), Inc. Reference QP8-051, Purchase Order Quality Requirements QP8-055, Review/Control Supplier Documentation PP-401, Quality Assurance Codes 50-2-351,
More informationSection 27 05 26 Grounding and Bonding for Communications
Part 1 General 1.1 General 1.1.1 Summary A. This section governs the products and execution requirements relating to furnishing and installing grounding and bonding for the communication systems. B. Description
More informationPark 250 Brushless Outrunner Instructions
Park 250 Brushless Outrunner Instructions Thank you for purchasing the E-flite Park 250 Brushless Outrunner motor. This motor is ideal for 3D models 4-6 oz (115-170g), and sport and scale models 6-12 oz
More information1) CERTIFICATE OF COMPLIANCE/CONFORMANCE
Standard Supplier Quality Requirements This document defines restrictions and quality system requirements applicable when goods and services are procured to SMART ELECTRONICS part numbers or Military,
More informationISHIDA BC-3000. Scale to Scale Communications
ISHIDA BC-3000 Scale to Scale Communications Setup Procedure & Operating Instructions March 2006 PN 94561 Revision History Date Page Description March 2006 Initial publication August 2006 2 Added RS-232
More informationJapan Export Air. International Air Freight Fuel Surcharge. All Destinations
Japan Export Air July 28, 2016 International Air Freight Fuel Surcharge Carrier 3K Jet Star Asia Airways 66 1-Jan-15 Taiwan, Philippines 48 1-Jan-15 5C C.A.L. Cargo 130 1-Oct-12 China, Hong Kong, Korea,
More informationPurchase Order Clauses and Conditions
Purchase Order Clauses and Conditions All purchase orders for materials, special processes, machining and fabrication services and end items are subject to the following requirements: General Requirements:
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationDVD-60C The Seven Sins of Wire Harness Assembly
DVD-60C The Seven Sins of Wire Harness Assembly Below is a copy of the narration for DVD-60C. The contents for this script were developed by a review group of industry experts and were based on the best
More informationPower Supply Cables and Connectors
Power Supply Cables and Connectors Often during the excitement of designing a challenging new system, some of the more mundane engineering aspects get overlooked. This is especially true of connections
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationAdapter Catalog MOBILE METAL ANALYZER. SPECTRO isort and SPECTROTEST
Adapter Catalog MOBILE METAL ANALYZER SPECTRO isort and SPECTROTEST Testing Adapters for Mobile Metal Analyzers A full range of metal analyzer products for onsite metal analysis tasks SPECTRO isort SPECTROTEST
More informationAPPLICATION NOTES FOR SMD LEDs
Storage conditions SMD devices are usually moisture/reflow sensitive. Moisture from atmospheric humidity enters permeable packaging materials by diffusion. Assembly processed used to solder SMD packages
More informationSPECIAL NOTICE. All references to NAT product part numbers (and associated images) are equivalent to AEM product part numbers.
SPECIAL NOTICE This product is now licensed to Anodyne Electronics Manufacturing (AEM) from Northern Airborne Technology (NAT). AEM is responsible for all matters related to this product, including sales,
More informationUIM-2T1 T1 Loop Bonding Uplink Interface Module
Installation Instructions UIM-2T1 T1 Loop Bonding Uplink Interface Module CAUTION Net to Net Technologies strongly recommends the use of proper electrostatic discharge (ESD) precautions when handling this
More information270526-TC Grounding and Bonding for Telecommunications Systems
270526-TC Grounding and Bonding for Telecommunications Systems Part 1 - General Related Documents The following related sections of the OT standards shall also be applicable to this section. OT Engineer
More informationTo install the I/O Module Board: 1. Remove AC power from decoder.
Installation Data (Catalog Number 2755-NB0, -NB1, -NB2) This document shows how to install the following components in the 2755-DSxx ➀ and 2755-DDxx ➀ Bar Code Decoders. I/O Module Board (Catalog No. 2755-NB1
More informationScreenLogic Wireless Connection Kit. Installation Guide. pool/spa control system
pool/spa control system ScreenLogic Wireless Connection Kit Installation Guide P/N 520663 - Rev B 8 Technical Support Contact Technical Support at: Sanford, North Carolina (8 A.M. to 5 P.M.) Phone: (800)
More informationQuality Assurance Provisions
Page 1 of 5 1. Purpose and Scope. The purpose of this document is to define the Quality Assurance Provisions FLIR Systems Inc. requires for inventory material received from Suppliers. This document applies
More informationRosemount 5300 and 5400 Series Terminal Compartment Spare Part Instruction
Manual Supplement Rosemount 5300 and 5400 Series Rosemount 5300 and 5400 Series Terminal Compartment Spare Part Instruction Introduction..................................... page S-1 Safety Messages.................................
More information2.1.1. Distributors In addition to the requirements noted herein, Distributors shall have a Quality System
1. Purpose This document defines requirements for suppliers providing aerospace and defense materials, products and services to Electromech Technologies. Supplier acceptance of a purchase order from Electromech
More informationOUTDOOR LED SCOREBOARD CARE & OPERATIONS MANUAL
OUTDOOR LED SCOREBOARD CARE & OPERATIONS MANUAL 98 0000 11 REV 11 19 08 DISCLAIMER This publication is not a service manual. There are no user serviceable components. If you require service, please contact
More informationBourns Rotary Encoders. Short Form Brochure Revision 2
Bourns Rotary Encoders Short Form Brochure Revision 2 Introduction Bourns Sensors and Controls Division has continued to expand its encoder product offering with a wide variety of models to support our
More informationCABLE SPECIFICATION CAN CAB RJ45-SUBD9
CABLE SPECIFICATION All technical information contained in this document is the exclusive property of STI and may neither be used nor disclosed without its prior written consent. AAV 33801 1/8 Connector
More informationwww.centralcoating.com Largest Applicator The the Northeast TEL: 508-835-6225 of Coatings in
TEL: 508-835-6225 www.centralcoating.com in The Largest Applicator of Coatings in the Northeast cosmetic PAINTING With over 30 years of experience Central Coating has a solid history of providing our customers
More informationSpecification for Electroless Nickel/ Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Circuit Boards
Specification for Electroless Nickel/ Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Circuit Boards Developed by the Plating Processes Subcommittee (4-14) of the Fabrication Processes
More informationSmall form factor bay converter and hard drive installation
Small form factor bay converter and hard drive installation HP xw6600 and HP xw8600 Workstations This document describes how to convert HP xw6600 and HP xw8600 Workstation 3.5-inch hard drive bays to hold
More informationMicrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
More informationInstallation Guide. Wyse Z Class 2 and 4-GB RAM Upgrade Option Kit. Products: Z90DW, Z90SW, Z90D7, Z90S7. Issue: 122211 PN: 883884-32L Rev.
Installation Guide Wyse Z Class 2 and 4-GB RAM Upgrade Option Kit Products: Z90DW, Z90SW, Z90D7, Z90S7 Issue: 122211 PN: 883884-32L Rev. A Copyright Notices 2011, Wyse Technology Inc. All rights reserved.
More informationDocument No: SRT-002. DigiTRON Single Connectors Site Recieved Test Manual. www.siemens.com/energy/connector-operations-manual
Document No: SRT-002 DigiTRON Single Connectors Site Recieved Test Manual www.siemens.com/energy/connector-operations-manual 2 This page records the revision status of the entire document and its authorisation
More informationT146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes
T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes* The graduate has reliably demonstrated the ability to: 1. fabricate
More informationMegaRAID LSIiBBU08 Intelligent Battery Backup Unit. Quick Installation Guide
MegaRAID LSIiBBU08 Intelligent Battery Backup Unit Quick Installation Guide 46307-00, Revision A, August 2010 Revision History Version and Date 46307-00, August 2010 Initial release of document. Description
More informationMaterial and Components Used for UL/C-UL/ULC Mark Follow-Up Services
MARK INTEGRITY PROGRAM UL Traceability Requirements Material and Components Used for UL/C-UL/ULC Mark Follow-Up Services UL defines minimum requirements for material and components used in UL certified
More informationAI120 AIswitch Series 120 Chassis
AI120 AIswitch Series 120 Chassis Guide INSTALLATION GUIDE Westell Technologies Part # 030-300715 Rev. A Copyright 2015 by Westell Technologies. All Rights Reserved. Westell, Kentrox and Optima Management
More informationI. R. D. T INSTITUTE OF RESEARCH DEVELOPMENT AND TRAINING
I. R. D. T INSTITUTE OF RESEARCH DEVELOPMENT AND TRAINING SYLLABUS SIX MONTHS FULL TIME Repair and Maintenance of Electrical gadgets EFFECTIVE FROM:- UNDER DEVELOPMENT Prepared By: Curriculum Development
More informationHL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
More informationInstallation Guide. Wyse VX0L and VX0LE Thin Clients 1-GB RAM Upgrade Option Kit. Issue: 022808 PN: 883884-07L Rev. A
Installation Guide Wyse VX0L and VX0LE Thin Clients 1-GB RAM Upgrade Option Kit Issue: 022808 PN: 883884-07L Rev. A ii Copyright Notice 2008, Wyse Technology Inc. All rights reserved. This manual and the
More informationCHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS 5.1 INTRODUCTION The manufacturing plant considered for analysis, manufactures Printed Circuit Boards (PCB), also called Printed Wiring Boards (PWB), using
More informationIndustrial Semi Metal USB
Industrial Semi Metal USB Generation 5L HERCULES-P Series Product Specification INDUSTRIAL Semi Metal USB Flash Disk Generation 5L Version 01V0 Document No. 100-xMUFD-MPT5L November 2014 APRO CO., LTD.
More informationMDU SC Connector Termination Procedure
MDU SC Connector Termination Procedure Series: 718-NANN-NNNNN B Update the stripping length 11/24/09 A Initial Release 4/30/09 Version Revision History Summary Issue Date I INTRODUCTION This document describes
More informationCircuit Board Sensor Products
Circuit Board Sensor Products AG21x-07 Cylinder Position Sensors PCB Assemblies for Pneumatic Cylinder Applications Features: Precision Magnetic Operate Point Three-Wire Current Source or Current Sink
More informationNI 9423. NI C Series Overview DATASHEET. 8-Channel Sinking Digital Input Module
DATASHEET NI 9423 8-Channel Sinking Digital Input Module 8-channel, 100 µs digital input 24 V logic, sinking digital input Compatible with NI CompactDAQ counters 250 Vrms, CAT II isolation 10-position
More informationLow Voltage Transformers Sealed, General Purpose, Dry Type
Low Voltage Transformers Sealed, General Purpose, Dry Type Catalog 7400CT9601R4/08 08 Class 7400 CONTENTS Description..............................................Page Introduction.................................................
More informationSingle Station Remote Alarm
ADI 5106G Certified ISO 9001:2000 Single Station Remote Alarm 529 5106-01-120 529 5106-01-220 INSTALLATION AND OPERATING INSTRUCTIONS Carefully Read These Instructions Before Operating Controls Corporation
More informationFreeport LNG Liquefaction Project
Freeport LNG Liquefaction Project GE Oil & Gas The 2015 Gas/Electric Partnership Conference XXIII Houston, February 17-19, 2015 GE Oil & Gas General Electric Company, 2015. GE Proprietary Information -
More informationEMOSAFE EN-100. Network Isolators for PCB assembly 1 GENERAL DESCRIPTION. Product Data Sheet ENGLISH
ENGLISH EMOSAFE EN-100 Product Data Sheet Network Isolators for PCB assembly November 2013 1 GENERAL DESCRIPTION The EMOSAFE EN-100 Network Isolator interrupts all galvanically conducting connections (conductors
More information[Docket No. FAA-2010-1205; Directorate Identifier 2010-NM-146-AD; Amendment 39-16677; AD 2011-09-15]
[Federal Register Volume 76, Number 84 (Monday, May 2, 2011)] [Rules and Regulations] [Pages 24345-24349] From the Federal Register Online via the Government Printing Office [www.gpo.gov] [FR Doc No: 2011-9917]
More informationHP UPS R1500 Generation 3
HP UPS R1500 Generation 3 Installation Instructions Part Number 650952-001 NOTE: The rating label on the device provides the class (A or B) of the equipment. Class B devices have a Federal Communications
More informationDIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 MINORITY AND WOMEN S BUSINESS ENTERPRISE PARTICIPATION
More informationQuality Supplier Requirements for Beckwith Electric Co., Inc.
Quality Supplier Requirements for Beckwith Electric Co., Inc. This Page Left Intentionally Blank To Our Valued Suppliers: One of the primary goals of Beckwith Electric is to provide the highest Quality
More informationDIVISION 26 - ELECTRICAL SECTION 26 05 20 CABLES FOR INSTRUMENTATION
DIVISION 26 - ELECTRICAL PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Instrumentation Cables 1.02 SUBMITTALS A. Submit in accordance with requirements of Section 01 33 00. B. Product Data: Submit
More informationInstallation Guide. Wyse C Class 2-GB RAM Upgrade Option Kit. Issue: 092910 PN: 883884-13L Rev. A
Installation Guide Wyse C Class 2-GB RAM Upgrade Option Kit Issue: 092910 PN: 883884-13L Rev. A Copyright Notices 2010, Wyse Technology Inc. All rights reserved. This manual and the software and firmware
More informationG H I J K G DIMMING. QS no dimming 1 0. (10%) 3-wire hot dim EcoSystem (10%) digital dim U 0 Mark 7 (1% HO 5% HE) 0-10 V M 0 Mark 10 (1%) hot dim N 0
TUBO 150 T5 Date Project Type Quantity Contact/phone Product Description 6" diameter surface mounted or suspended extruded aluminum profile, powder coated white. Endcaps made of solid aluminum, available
More informationChapter 14. Printed Circuit Board
Chapter 14 Printed Circuit Board A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper
More informationCLICKBOND FASTENER OVERVIEW:
Infastech Pty Ltd A.B.N. 98 000 482 986 A.C.N. 000 482 986 891 Wellington Road, Rowville, Victoria, 3178 Telephone: (03) 9765 6400 Fax (03) 9765 6444 CLICKBOND FASTENER OVERVIEW: The CLICKBOND fastening
More informationSunny Boy Accessories SMA POWER BALANCER
Sunny Boy Accessories SMA POWER BALANCER Installation Guide SBUS-PowBal-IUS102810 IMUS-SBUS-PBL Version 1.0 US SMA America, LLC Legal Restrictions Copyright 2010 SMA America, LLC. All rights reserved.
More informationGas Oven Repair Guide
- /6 - Gas Oven Repair Guide [ FX70*, FX50*] Ver. Aug-0 Ignition Failure Cooktop ignition Oven ignition Heating defect Oven Cooktop Abnormal Flame Button, Motors Lamp Others Smell, Smoke, Noise No Display,
More informationPowerFlex 700S and 700H Frame 12 DC Bus Connector Kit
PowerFlex 700S and 700H Frame 12 DC Bus Connector Kit Installation Instructions This document provides instructions for the installation of a DC bus connector kit for PowerFlex 700S and 700H frame 12 drives
More information12VDC MAGNETIC LED DIMMABLE POWER SUPPLIES SPEC SHEET DIGEST
12VDC MAGNETIC ED DIMMABE POER SUPPIES SPEC SEET DIGEST TM-30-DIM TM-50-DIM T-60-DIM TM100-DIM TM200-DIM TM300-DIM iring Diagram for TM-50-DIM and TM-100-DIM ED 12VDC MAGNETIC DIMMABE 30 POER SUPPY Smallest
More informationDIVISION 27 COMMUNICATIONS. A. System design shall be completed by a Registered Communications Distribution Designer (RCDD).
DIVISION 27 COMMUNICATIONS 27 00 00 COMMUNICATIONS A. System design shall be completed by a Registered Communications Distribution Designer (RCDD). B. Comply with American National Standards Institute
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationDigital Controllers ACTUATOR COMPATABILITY
Product Specification 36502B DESCRIPTION APECS DPG-21XX-00X Digital Controllers The DPG-21XX-00X digital controller is used primarily to govern diesel or gas fueled engines of generator sets. This microprocessor-based,
More informationRACKS CLASSIC G4 SPEC. DATA SHEET page 1/5. Description. Features
RACKS DATA SHEET page 1/5 Description Part Number G4PB24 Description G4 24-Channel I/O Module Rack The G4PB24 I/O mounting rack accommodates up to 24 G4 I/O modules. Insert and remove modules easily and
More informationIPC and RENEX trainings
IPC and RENEX trainings RENEX EEC Training Centre IPC certificates Training and conference centre IPC trainings for specialists IPC trainings for trainers RENEX copyright trainings Standards 192 193 194
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More information