3 KRONE s 25-Pair FT Block is the perfect replacement

Transcription

1 Section Feed-hru ermination Block System Meets IA/EIA Category 5e (C5e) performance specifications. Appropriate for both data and voice applications. High density and quick installation are the hallmarks of KONE s 25-Pair F (Feed-hru) Block System. Convenient pre-terminated assemblies with 50-pin telco connectors provide for fast, reliable termination. Feed-hru System KONE s 25-Pair F Block is the perfect replacement for 110 installations. Complete patching and cross-connect options give you the versatility you need for any configuration. Color-coded blocks are offered, with each pair color marked according to industry standards. Handy label holders provide clear identification of groups or individual pairs. KONE Product Catalog MK I

2 F (Feed-hru) Wire ermination Blocks KONE No. Feed-hru System 25-Pair F Block, 4-Pair Color Coded his F (Feed-hru) Block allows highdensity termination in a small area. he F Block is a two-piece assembly, consisting of a base and a connector. Includes 4-pair color code marked on the face of the block. It is used for terminating 4-pair station cables. Each block terminates six 4-pair cables. Dimensions 1"H x 8 /4 "W x 1 7/8 "D (25.4mmH x 225.mmW x 47.6mmD) 25-Pair F Block, 5-Pair Color Coded Same as above, but with 5-pair color code (orange, blue, green, brown and slate) marked on the face of the block. It is used for terminating 25-pair cable M Pair F Block, 4-Pair Color Coded 25-Pair F Block, 5-Pair Coded Same as above, but with color-coding marked in white every fifth pair. It may be used for terminating riser cables or with PBX systems. Each block terminates 25 pairs. Dimensions 1"H x 8 /4 "W x 1 7/8 "D (25.4mmH x 225.mmW x 47.6mmD) M 25-Pair F Block, 5-Pair Color Coded 1. erminate cables. 2. Move base unit from bottom to top. 25-Pair F Block, Separated. Flip and snap into place KONE Product Catalog MK I08

3 F (Feed-hru) Field Assembly Kits Field Assembly Kits KONE s Universal Mounting System provides modularity and three mounting options: Wall mount as is. Wall mount with optional UMS Backboard (for greater cabling depth). ack mount with UMS Backboard. Includes a Universal Mounting Bracket, two Horizontal Wire Managers and your choice of 4-pair color-coded or 5-pair coded F Blocks. oute cable from the top, bottom or rear. 4-pair color-coded blocks are marked with IA color codes in 4-pair groups. 5-pair coded blocks are marked with a white stripe on every fifth pair. Order labeling accessories, such as label holders and paper labels, separately. KONE No. Feed-hru System 100-Pair 4-Pair Color Coded Kit Includes four 25-Pair F Blocks with 4-pair color-coding, two Horizontal Wire Managers and one Universal Mounting Bracket. his kit terminates twenty-four 4-pair station cables. Add Hinged Label Holders for identification of stations or pairs. Dimensions 14 /4 "H x 10 /4 "W x 5 1/4 "D (74.7mmH x 27.1mmW x 1.4mmD) 100-Pair 5-Pair Coded Kit Same as above, but with 5-pair code marked on the face of the block Pair Field Assembly Kit 00-Pair 4-Pair Color Coded Kit Includes twelve 25-Pair F Blocks with 4-pair color-coding, two Horizontal Wire Managers and one Universal Mounting Bracket. his kit terminates seventy-two 4-pair station cables. Add Hinged Label Holders for identification of stations or pairs. Dimensions 14 /4 "H x 10 /4 "W x 5 1/4 "D (74.7mmH x 27.1mmW x 1.4mmD) Pair 5-Pair Coded Kit Same as above, but with 5-pair code marked on the face of the block ech IPS When installing 25-Pair F Blocks, it is easier to lace the wire from bottom to top, then terminate the field from top to bottom, followed by flipping all blocks in that field. KONE Product Catalog MK I08 -

4 Patch Cords ruenet Category 5e (C5e) Cords for Feed-hru Blocks KONE No. Feed-hru System Category 5e (C5e) F Patch Cords hese Feed-hru Patch Cords use KONE Category 5e cable, which exceeds the requirements for Category 5e. KONE s Patch Cords are available in six colors and in standard lengths of 4, 7, 10, 15, 25 and 50 feet. F Plug to F Plug hese 4-Pair F Patch Cords are wired straight through. ed Cable Green Cable Yellow Cable Gray Cable M P5EF-WXX P5EF-DXX P5EF-BLXX P5EF-GXX P5EF-YLXX P5EF-GYXX Pair 4 Pair F Plug to J45 Plug, 568A hese 4-Pair F Plug to J45 (8P8C) Plug Patch Cords are wired 568A. ed Cable Green Cable Yellow Cable Gray Cable P5EB0WXX P5EB0DXX P5EB0BLXX P5EB0GXX P5EB0YLXX P5EB0GYXX Wired to Pin # Pair 4 Pair F Plug to J45 Plug, 568B hese 4-Pair F Plug to J45 (8P8C) Plug Patch Cords are wired 568B. ed Cable Green Cable Yellow Cable Gray Cable P5EB-WXX P5EB-DXX P5EB-BLXX P5EB-GXX P5EB-YLXX P5EB-GYXX Wired to Pin # Pair 4 Pair Selecting Cable Lengths for Patch Cords Insert the number of the length required at the end of the part number in place of the XX: 04 = four feet 07 = seven feet 10 = ten feet 15 = fifteen feet 25 = twenty-five feet 50 = fifty feet ech IPS When inserting an F Plug into an F Block, be sure that the KONE name is on the top and the clip is on the bottom KONE Product Catalog MK I08

5 Patch Cords Category 5e (C5e) Cords for Feed-hru Blocks KONE No. Category 5e F (Feed-hru) Patch Cords hese Feed-hru Patch Cords Category 5e cable and exceed the requirements for Category 5e. KONE Patch Cords are available in three colors and in standard lengths of 4, 7, 10, 15, 25 and 50 feet. F Plug to F Plug, 1 Pair hese 1-Pair F Plug Patch Cords are wired straight through. ed Cable 5e XX XX XX Feed-hru System F Plug to F Plug, 2 Pair hese 2-Pair F Plug Patch Cords are wired straight through. ed Cable XX XX XX Selecting Cable Lengths for Patch Cords Insert the number of the length required at the end of the part number in place of the XX: 04 = four feet 07 = seven feet 10 = ten feet 15 = fifteen feet 25 = twenty-five feet 50 = fifty feet ech IPS Before ordering patch cords, check the transmit and receive orientation of your hub and network interface card. Some manufacturers require a crossover of & conductors; others have either the hub port or NIC card reversed in advance. Some can switch between the two. Call ech Support at (800) for crossover cable part numbers. KONE Product Catalog MK I

6 Labeling and Accessories KONE No. Feed-hru System 25-Pair F est Shoe For use with 25-Pair F (Feed-hru) Blocks, this est Shoe can be used to quickly test all 25 pairs at once. his est Shoe provides the required spacing for F Blocks, 25-pair at a time. It has a 50-pin female connector with hook and loop fastener lock, and fits a variety of test equipment. Dimensions 1"H x 8 /4 "W x 1 7/8 "D (25.4mmH x 225.mmW x 47.6mmD) F est Cord, 1-Pair with wo Banana Plugs 1-Pair KONE F connector to two banana plugs, one-foot length. his test cord may be used to bridge or monitor the circuit. wo banana plugs are provided for connecting to test equipment Pair F est Shoe F est Cord ype 160 Hinged Label Holders ype 160 label holders are used on the 25-Pair F Blocks to identify cable groups or individual pairs. Folds out of the way when punching down wires. Can be used for 1- to 25-pair configurations ype 160 Hinged Label Holder Label Sheets for ype 160 Hinged Label Holder Each 8 1/2 " x 11" sheet contains 4 perforated labels. he lined label sheet is printed to mark pair groups. he other label sheets contain no additional markings. Lined Label Sheet, Blue and White One side is blue and marked in 4-pair increments. he backside is white and marked in 5-pair increments. Gray/Brown Label Sheet Yellow/ed Label Sheet Orange Label Sheet Purple Label Sheet Blue Label Sheet Green Label Sheet Front (Blue) ech IPS Back (White) Label Sheets for ype 160/Hinged (Other Colors) For examples of IA/EIA color coding, refer to the chart on page You can now use your Brady LabelMark software to print on KONE s 8 1/2 " x 11" label sheets. KONE has templates available to get you started. he templates can be downloaded from KONE Product Catalog MK I08