Connection cable for amplifier Type 4701AxA and torque sensor Type 4501A... (0143SD) version Q/R/H
|
|
|
- Hugh Ray
- 9 years ago
- Views:
Transcription
1 for Torque s 4501A... to 4504A... KSM... KSM KSM Connection cable for amplifier 4701AxB and torque sensor 4501A... (0143SD) version Q/R/H Contacts 6 Length (m) L = 5 m; customised length, KSM LIYCY 5x0,25 transparent Application Strain gage (DMS) torque measurement Female connector M16x0,75 6-pol ø18,5, KSM Male connector: ø18,5, KSM KSM KSM Connection cable for amplifier 4701AxA and torque sensor 4501A... (0143SD) version Q/R/H Contacts 6 Length (m) L = 5 m; customised length, KSM LIYCY 5x0,25 transparent, one side with open ends ø18,5 M16x0,75 44 Application Female connector Shell protection 72 Female connector 6-pol (Binder) KSM00822 Standard length 5 m flexible LIYCY 5x0,25 transparent KSM Strain gage (DMS) torque measurement M16x0,75 6-pol ø18,5, KSM IP40 with open ends 4501A... (0143) wt br ye gy gn Schema AxA Page 1/8
2 for Torque s 4501A... to 4504A... KSM Connection cable for amplifier 4731A... and torque sensor 4501A... (0143SD) version QA Length (m) L = 5 m Application Strain gage (DMS) torque measurement Female connector M16x0,75 12-pol ø18,5, KSM Male connector: ø18,5, KSM KSM Connection cable for torque sensor 4501A... (0143SD) version QA/HA Length (m) L = 5 m, one side with open ends Application Female connector Shell protection Strain gage (DMS) torque measurement M16x0,75 12-pol ø18,5, KSM IP40 Page 2/8
3 for Torque s 4501A... to 4504A... KSM KSM Connection cable for monitoring DMF-P V3 4731A... and torque sensors 4502A... (0170MS), 4503A... (0260DM), 4504A... (0325DF) Length (m) L = 5 m; customised length, KSM A A A... KSM KSM Application Torque measurement with contactless signal transmission Female connector M16x0,75 12-pol ø18,5, KSM Male connector: ø18,5, KSM KSM KSM Connection cable for electric customer and torque sensor 4502A... (0170 MS), 4503A... (0260DM), 4504A... (0325DF) Length (m) L = 5 m; customised length, KSM124970, one side with open ends 4502A A A... KSM KSM Application Female connector Shell protection Torque measurement with contactless signal transmission M16x0,75 12-pol ø18,5, KSM IP40 Page 3/8
4 for Torque s 4501A... to 4504A... KSM KSM Connection cable for 4503A... (0260DM), 4504A... (0325DF) and RS-232C output Contacts 7 Length (m) L = 5 m; customised length, KSM LIYCY 7x0,25 transparent, one side with open ends Temperaturbereich 0 70 C 4503A... (0260) RS-232C Application Female connector Shell protection To connect RS-232C output and select range of 4503A...(0260DM) M16x0,75 7-pol ø18,5, KSM00517 IP40 KSM KSM Connection cable for 4503A... (0260DM), 4504A... (0325DF) and RS-232C output Contacts 7 Length (m) L = 5 m; customised length, KSM LIYCY 7x0,25 transparent Temperaturbereich 0 70 C 4503A A... RS-232C Connector D-Sub 9-pol Application To connect RS-232C output and select range of 4503A...(0260DM) Female connector M16x0,75 7-pol ø18,5 Male Connector: D-Sub 9-pol KSM Page 4/8
5 for Torque s 4501A... to 4504A... KSM KSM Connection cable for torque sensor 4504A (0325DF)... plug C Contacts 7 Length (m) L = 5 m; customised length, KSM LIYCY 6x0,25 transparent 4504A... (0325) Plug C Connector D-Sub 15-pol Application Torque measurement 4504A... plug C Female connector M16x0,75 7-pol ø18,5, KSM Male Connector: D-Sub 15-pol KSM KSM KSM Connection cable for torque sensor 4504A... plug D Contacts 8 Length (m) L = 5 m; customised length, KSM LIYCY 5x0,25 transparent 4504A... (0325) Plug D Connector D-Sub 15-pol Application Speed / angle measurement 4504A... plug D Female connector M16x0,75 8-pol ø18,5, KSM Male Connector: D-Sub 15-pol KSM Page 5/8
6 for Torque s 4501A... to 4504A... KSM KSM Connection cable for UMV A..., torque sensor 4501A... (0143SD) Contacts 6 Length (m) L = 2,5 m; customised length, KSM LIYCY 7x0,25 transparent 4501A... (0143) UMV A... Connector D-Sub 25-pol Application Torque measurement 4501A... (0143SD) Female connector M16x0,75 6-pol ø18,5, KSM Male Connector: D-Sub 25-pol KSM KSM KSM Connection cable for UMV A..., torque sensor 4501A... (0143SD) Length (m) L = 2,5 m; customised length, KSM A... (0143) UMV A... Connector D-Sub 25-pol Application Torque / angle measurement 4501A... (0143SD) Female connector M16x0,75 12-pol ø18,5, KSM Male Connector: D-Sub 25-pol KSM Page 6/8
7 for Torque s 4501A... to 4504A... KSM KSM Connection cable for UMV A..., torque sensor 4503A... (0260DM), 4504A... (0325DF) Length (m) L = 2,5 m; customised length, KSM A... (0260) 4504A... (0325) UMV A... Connector D-Sub 25-pol Application Torque / speed measurement 4503A... (0260DM), 4504A... (0325DF) Female connector M16x0,75 12-pol ø18,5, KSM Male Connector: D-Sub 25-pol KSM KSM KSM Connection cable for UMV A..., torque sensor 4502A... (0170MS) Length (m) L = 2,5 m; customised length, KSM A... (0170) UMV A... Connector D-Sub 25-pol Application Torque / speed measurement 4501A... (0143SD) Female connector M16x0,75 12-pol ø18,5, KSM Male Connector: D-Sub 25-pol KSM Page 7/8
8 for Torque s 4501A... to 4504A... KSM Female cable connector with solder eye ca. 71,5 Contacts 6 Temperature range 40 C 85 C Application Strain gage (DMS) torque measurement Female connector (Binder) series 581 ø 18,5 M 16,0 x 0,75 ca. 43,5 KSM Female cable connector with solder eye ca. 71,5 Contacts 7 Temperature range 40 C 85 C Application RS-232C interface / select measuring range Female connector (Binder) series 581 ø 18,5 M 16,0 x 0,75 ca. 43,5 KSM Female cable connector with solder eye Contacts 8 Temperature range 40 C 85 C Application Rotation speed / angle measurement Female connector (Binder) series 581 ø 18,5 M 16,0 x 0,75 ca. 43,5 ca. 71,5 KSM Female cable connector with solder eye Temperature range 40 C 85 C Application Torque / speed / angle measurement Female connector (Binder) series 581 ø 18,5 M 16,0 x 0,75 ca. 43,5 ca. 71,5 Page 8/8
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. [email protected] - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
Actuators and positioning drives
Actuators and positioning drives distributed by www.laumans.com Actuators and positioning drives FlexiDrive product range type MDBA 42 MSQA 46 MSAA 42 Actuator Actuator Actuator motor brush DC motor brush
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
Electronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
Temperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
Standard LIGO Electrical Interfaces
LIGO Laboratory / LIGO Scientific Collaboration LIGO- T060123-07-C LIGO July, 2011 Standard LIGO Electrical Interfaces Richard Abbott Distribution of this document: LIGO Science Collaboration LIGO Laboratory
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
W150: Miniature photoelectric switch series with completely integrated electronics
Product group W50 Photoelectric proximity switch BGS Photoelectric proximity switch energ. Photoelectric reflex switch W50: iniature photoelectric switch series with completely integrated electronics Through-beam
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment
![B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment](/thumbs/30/14685882.jpg "B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment")
B MOTORPORT COMPONENT B TEMPERATURE ENOR Purpose and unction Temperature sensors used in modern engine management systems are of NTC [negative temperature co-efficient] design. imply as temperature rises
HF series Hall effect joysticks
Distinctive features and specifications 1, 2 & 3 axis configurations Dual sensors for redundancy CANbus J1939 and CANopen options Voltage regulator, 24V supply option USB 1.1 HID interface option ized
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
Cables. Accessories. For Force, Torque and Strain Sensors
Accessories Cables For Force, Torque and Strain Sensors Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater
Safety at a high level!
SIKA Level Switch SIKA Level Switch Safety at a high level! Convincing Advantages easy and reliable method to monitor fluid levels proven float principle easy side installation using threads ¾" or ½" BSP
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
MPLM1630 MPLM2535 MPLM3240
MPLM Self-centering 2-jaw electric parallel gripper with long stroke Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed
The self-starting solar-powered Stirling engine
The self-starting solar-powered Stirling engine This project began at the request of an artist who had proposed a Stirling-engine-powered sculpture to a client. The engine only had to run, not really produce
W 2: Subminiature photoelectric switch series: extremely small and extremely strong
Photoelectric proximity switches BGS Photoelectric proximity switches energetic, (V optics) Photoelectric reflex switches Through-beam photoelectric switches W : Subminiature photoelectric switch series:
LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
Digital display DA 48
Loop powered plug-in LCD display No auxiliary energy source needed Scale freely adjustable on site Can be turned to any position Suitable for any 0 ma transmitter with EN 175301-803A connector Digital
MPPM1606 MPPM2508 MPPM3210
MPPM 2-jaw parallel self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged. No programming required. Gripper retention guaranteed in event
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
General Specifications
General Specifications Cables (for RIO) GENERAL This General Specification (GS) covers the specifications of signal cables and communication cables used in the RIO device. EXTERNAL DIMENSIONS, MODELS AND
maxon motor maxon motor control EPOS Positioning Controller Cable Starting Set Edition June 2006 part number 302287 Positioning Controller
control EPOS Positioning Controller Cable Starting Set Edition June 2006 24/1 part number 302287 Positioning Controller Documentation Cable Starting Set 1 Table of contents 1 Table of contents... 2 2 Table
Contactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
BRIEF INFORMATION Angular Position Sensors Single and double sensors
BRIEF INFORMATION Angular Position Sensors Single and double sensors Single or redundant sensors High precision due to internal 14 bit resolution High thermal stability and linearity High insensitivity
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Sensors OXYGEN SENSORS PRESSURE SENSORS TEMPERATURE SENSORS ROTARY POTENTIOMETER SPEED SENSORS UEGO LAMBDA BOX STAND-ALONE PRT 02/03/06 P002P010 OPS04
OXYGEN SENSORS UEGO LAMBDA BOX STAND-ALONE PRESSURE SENSORS PRT 02/03/06 P002P010 OPS04 TEMPERATURE SENSORS Sensors ATS 04 NTC PT1000 TC-K WTS 05 ROTARY POTENTIOMETER RPT98 W1051 W1059 SPEED SENSORS SEN
D.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
Industrial circular connectors
Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors
Encoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
Mounting Instructions. Torque Transducer. A0329 3.2 en
Mounting Instructions Torque Transducer T5 T5 Contents 3 Page Safety instructions.............................................. 4 1 Measuring characteristics..................................... 7 2 Mounting.....................................................
Vert-X 16-5V / 10...90% Ub. Applications Servodrives Dancer arm Operating table
Version MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity % meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz (5) - Sample
Figure 3. Pressure taps distribution around the bus model (64 pressure taps)
Figure1. Double deck bus into the wind tunnel The aerodynamic balance, built by the authors according Tusche [11], is based on strain gage type cells arranged as a double Wheatstone bridge acquiring simultaneously
IBS IP KIS A. Data Sheet INTERBUS-S. Digital I/O Module
IBS IP KIS A Data Sheet Digital I/O Module Data Sheet Revision C Product Description The IBS KIS IP A module is a digital I/O module for the extended installation remote bus. Features - InterBuS-S protocol
CertoLog & CertoPID HIGH-RES TOUCH SCREEN DATA STORED ON CLOUD PLATFORM EASY SETUP. Programmable data loggers and PID controllers with cloud access
CertoLog & CertoPID Programmable data loggers and PID controllers with cloud access HIGH-RES TOUCH SCREEN DATA STORED ON CLOUD PLATFORM EASY SETUP CertoLog DATA LOGGER WITH REVOLUTIONARY INTERFACE AND
Differential Charge Amplifier
Electronics Differential Type 58A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure (IP64) Plastic
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
Electrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure
Electrical connection technologies Electrical connectors Electrical connectors with cable, series CN Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable,
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
Encoder WDG 58B. www.wachendorff-automation.com/wdg58b
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
Accessories for Enabling Switches
BD Male plug SS Female connector C- Male flange connector SD Female connector BS Extension cable BD -pin + PE Dimension drawings Male plug SS -pin + PE Female connector C- -pin + PE BD for male plug SS
K-Type Thermocouple Sensor User s Guide
K-Type Thermocouple Sensor User s Guide 1 TABLE OF CONTENTS: 1 INTRODUCTION... 2 2 TYPICAL APPLICATION:... 2 3 INSTALLATION RULES:... 2 3.1 Connecting the sensor to M1/MD4 data logger:... 2 3.2 Connecting
ServoOne. Specification. Option 2 - Technology. x 11. x 8 X 8. x 10. x 9. x 7. x 6 TTL Encoder / TTL Encoder simulation
x - + - + x L L L AC SO 4-45 A DC SO 4- A ServoOne Specification x 9 - + - + x 7 x 8 X 8 Option - Technology x 6 TTL Encoder / TTL Encoder simulation Specification ServoOne Specification Option - Technology
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
The SOLUTION for Gathering Rotary Torque Sensor with Encoder Data
10Thomas,Irvine,CA92618USA Tel:(949)465?0900 Fax:(949)465?0905 The SOLUTION for Gathering Rotary Torque Sensor with Encoder Data Rotary torque sensors with encoder options are common in test and measurement
Electronic Pressure Switch EDS 3000
For Your Information Electronic Pressure Switch EDS 3000 User Manual Revision: November 01, 2002 1. EDS 3000 Functions The EDS 3000 unit offers the following functions: Display pressure in psi, MPa, or
GISMA UNDERWATER CONNECTORS SERIES 40
CONTENTS SEITE / PAGE GENERAL 4 GENERAL ARRANGEMENT 5 DESIGN MECHANICAL FEATURES 7 FIBRE OPTIC FEATURS 7 ELECTRICAL FEATURES 7 REFERENCE SYSTEM 8 REFERENCE SYSTEM CONTACTS 9 CONTACT LAYOUTS 9 SUGGESTIONS
Plug - Type (Male/Female) Attenuators CAA series Singlemode
Plug - Type (Male/Female) Attenuators CAA series Singlemode Description: The plug-type singlemode attenuators are used directly on the ends of fiber optic jumpers prior to installation in adapters. These
Mounting instructions. Acceleration Transducer B12. B 26.B12.10 en
Mounting instructions Acceleration Transducer B12 B 26.B12.10 en B12 3 Contents Page Safety instructions.............................................. 4 1 Scope of supply..............................................
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
DOCUMENTATION PD16 CP3-SVE-M75DC-24
» User Guide «CPCI Power Supply Manual PRODUCT DOCUMENTATION PD16 CP3-SVE-M75DC-24 Reference ID: 24139 PD16, Rev. 01 February 28, 2011 If it s embedded, it s Kontron. PD16: CP3-SVE-M75DC-24 CPCI Power
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
9000 Series Accelerometers Specifications
Technical Data 9000 Series Accelerometers Specifications Catalog Numbers EK-43781I, EK-43782I, EK-46255I, EK-45890I, EK-43784I, EK-47086I, EK-43792I, EK-47090I, EK-43799I, EK-43794I, EK-43795I, EK-43797I,
www.tvsat.com.pl COAXICON Series Mobile Phone Switching Coax Connectors RF Coax Connectors Product Facts
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
Arndt & Voß GmbH Elektronik - Meßtechnik
8 channel measuring unit Contents: Page 1. Displays and control elements 2-4 2. Technical Data 4 3. Power Supply 4 4. Profibus Interface X312 4 5. Connection schematics 4-6 Security comments according
Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8
Type code Ident no. 1545007 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm Cable max. 50 m between interface and read/write head 2 decimal rotary coding switches for the adjustment
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
Sturdy aluminium housing, anodized in blue Female connector for optical fiber (please order optical fiber separately) Mounting holes
SI-COLO Series SI-COLO2-LWL-HAMP-COL4 - Big measuring range: typ. 25 mm... 40 mm (with optical fiber and attachment optics KL-14 or KL-17) - Large assortment of optical fibers available (reflected or transmitted
Elektromotoren und Gerätebau Barleben GmbH
Elektromotoren und Gerätebau Barleben GmbH OPERATING INSTRUCTIONS Transformer Protection Relay NM Series (Buchholz principle) Elektromotoren und Gerätebau Barleben GmbH Table of contents Page 1. Safety
330505 Low Frequency Velocity Sensor
330505 Low Frequency Velocity Sensor Bently Nevada* Asset Condition Monitoring Description The Bently Nevada Low Frequency Velocity Sensor is designed to measure absolute (relative to free space) bearing
XUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
SNC-VL10P Video Network Camera
SNC-VL10P Video Network Camera CHANGING THE WAY BUSINESS 2AM. WATCHING HIS NEW PRODUCTION LINE. 10,000 MILES AWAY. COMMUNICATES www.sonybiz.net/netstation CORPORATE COMMUNICATIONS SURVEILLANCE VIDEOCONFERENCING
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
EXPERTS IN WATER COOLING SINCE 2001. aquastream ULTIMATE SUPER SILENT PUMP TECHNOLOGY. The ultimate pump system. www.aqua-computer.
The ultimate pump system www.aqua-computer.de AQUASTREAM Since its market introduction in 2003, the name stands for reliable and durable water cooling pump technology - made in Germany. We have bundled
Temperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
Conductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
Magnetic Gear Wheel Encoder Order Codes - Connection Kit RGM2G -... -.../... - RGM2S -... -.../... - SGM2G -... -.../... - RGK2G -... -.../...
Order Codes - Connection Kit RGM2G -... -.../... - RGM2S -... -.../... - SGM2G -... -.../... - RGK2G -... -.../... - Connection kit: - - Length service cable Lc in cm Connector model Signal sequence The
SAFETY LIGHT CURTAINS
SAFETY LIGHT CURTAINS Overview Safety Light Curtains with resolutions that can be reduced guarantee protection and tolerate work equipment in the protective field The Safety Light Curtains comply with
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
MicroMachined Silicon modular pressure sensor
MicroMachined Silicon modular pressure sensor Configurable High Accuracy High Temperature Performance For Industrial, Test and Measurement, and Aerospace Applications Low Pressure from 10 in-h 2 O to 2.5
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
X-Cruiser Series Installation Guide
X-Cruiser Series Installation Guide Verkrijgbaar bij: Grafi-Call Computers BV. Leiden 1:Unscrew the thumb screws 2.Pull the side panel back then 3:Find the motherboard stand-offs from Side Panel. pull
Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8
CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps LEDs for display of supply voltage, group and bus errors as well as status and diagnostics Connection
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
How to Order : Power Connector
How to Order : Power Connector Power Connector 89 90 XXX - XX X X X X - X X X XXX SPECIFICATIONS No. Specifications Standard Value Style A For Cable with S/R B For Cable without S/R P For Panel Front Mounting
Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc
Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular
5 WAYS TO EVEN GREATER EFFICIENCY
EPSON PROSIX C4 AND C8 SERIES 6 AXIS ROBOTS 5 WAYS TO EVEN GREATER EFFICIENCY ENGINEERED FOR BUSINESS 2 / 3 / THE OPTIMAL FAMILY PACKAGE DIFFERENT RANGES, VARIOUS LOAD CAPACITIES You don t want a standard
For MRI Scanners, Equipment, and MRI Body Coils
Medical Interconnect Solutions For MRI Scanners, Equipment, and MRI Body Coils (630) 595-2300 (800) 323-9562 www.phoenixofchicago.com To meet the demands of an evolving medical diagnostics market, The
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
Field bus connections Link structure CMS link structure CMS, B-design. Brochure
link structure CMS, B-design Brochure 2 link structure CMS, B-design Bus coupler with driver Optional field bus connection with I/O function (CMS), B-design Bus coupler with driver Field bus protocol:
Torque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type