TECHNICAL ORGANIZATION

Transcription

1 SERVING2000 Consulting Engineering Adriano Butera and Francesco Mancuso 2, Viale Michelangelo Lamezia Terme (CZ) ITALY Tel./fax /24870 A SHORT INTRODUCTION The SERVING2000 civil engineering studio was founded in 1996 by two engineers, Eng. Francesco Mancuso and Eng. Adriano Butera, employed in one of the greatest civil contractors in south Italy, after the contractor s failure. At the beginning the studio activity was generally directed to give civil engineering consulting to contractors of public works; later on the studio activity was extended to public contracts for projecting and management of civil engineering works, holding down however an important amount of contracts acquired by clients who appreciate the professionalism, the production capacity and the flexibility of serving2000 organization. Serving2000 organization has the benefit of the many years experience reached by foundator engineers in the field of projecting and building of roads, bridges, retaining works, tunnels, aerodromes, in the field of geotechnics and structural designing and in the field of project management of great civil contracts. In 12 years of activity and more Serving2000 made projects, work managements, consultings for the most important civil contractors and for many public agency or local governments (for ex. ANAS S.p.A., Amministrazione Provinciale di Catanzaro, SACAL S.p.A., Amministrazioni Comunali ecc.) TECHNICAL ORGANIZATION In Serving2000 organization operate two senior engineers, a junior engineer, CAD designers, a land surveyor, an accountant and outer partners. The activity related to each contract is made under the supervision of Eng. Mancuso or Eng. Butera, who attend to quality control according to fixed standards ad tested procedures. According to specific requirements of each contract, Serving2000 avail itself of outer partners (free professionals, surveyors, CAD operators, laboratories etc.) always coordinated and controlled by Eng. Mancuso or Eng. Butera. hardware: EQUIPMENT # 6 computers (CPU Pentium 4 and Pentium 3) # 4 colour printers (laser and ink-jet, A4 A3 and A2 format) # 2 HP colour ink-jet plotter A0 format # 2 digital cameras high resolution # 1 scanner # 4 CD and DVD burners # 2 notebooks HP (CPU Pentium 4 and Centrino duo) software updated (enclosed in brakets the author or the software house): Auto-CADD Computre Aided Design (Autodesk) Civilsoft structural design (ASG) Supersap finite elements modelling of structures (ALGOR) Microsap finite elements modelling of structures (Tesys) Edisis reinforced concrete building analysis and design (Newsoft) Aspen slope stability analysis (Newsoft) Sezione reinforced concrete sections analysis (Newsoft) Solaio slab analysis and design (Newsoft) Programs for shallow foundations analysis (Eng. Butera) Programs for deep foundations analysis (Eng. Butera) Programs for retaining walls analysis (Eng. Butera) Geotechnical programs (DEI Tipografia del Genio Civile Roma) pag. 1 di 8

2 Max retaining walls design (Aztec Informatica) Pac retaining piles walls design (Aztec Informatica) Walls 6.3 retaining walls (Grafill Soc. Coop. a r.l.) Progetto calcestruzzo concrete design (Guida Italcementi UNI). Ponti bridge analysis and design (SIGMAc Soft.) Precom reinforced prestressed concrete beam analysis and design (SIGMAc Soft). Concant LT bill of materials and work account (DigiCorp) ManTus-P maintenance plannings (Acca software) Privatus privacy planning (Acca software) Primus-P bill of materials and work account (Acca software) C.P.I. Win safety planning in construction sites (BM Sistemi S.r.l.) CerTus safety planning in construction sites (Acca software) STRATO topography and road design (Minella & Carazzai) STRADE topography and road design (Digicorp) PROST topography and road design, quarries, piping, rails (Sierra Soft) Office XP package (Microsoft) Land survey equipment: Theodolite T2 Tachimeter (transit) Wild with precision diastimeter D1000, level, stadia and prism. Optical level WILD NK20 Serving 2000 has digital signature certification. Curricula of foundator engineers Ing. Adriano BUTERA Personal Info Name and Surname: Adriano BUTERA Place and birth's date: Lamezia Terme (Italy), July 30 th, Citizenship: Italian. Education and Formation 1986: University bachelor degree (5 years degree in the italian university organization) in civil engineering (senior engineer, specialized in structures, transports and geotechnics) Calabria University (Cosenza Italy), with final note 107/ : qualification to practice the profession of Engineer in Italy : assistant in the Difesa del Suolo Department of Calabria University, making research activity in geotechnics. 1994: Refresher course in Geotechnical Engineering: on landsliding and slope stability Messina (Italy). 1994: Refresher course in Geotechnical Engineering: on Geotechnics in designing and construction of waste storages Messina (Italy). 1995: Refresher course in Geotechnical Engineering: on Groundwater: use and safeguard geological hidraulic geotechnical and environmental aspects Taormina (Italy). 1999: Course on safety in Catanzaro (Italy) for the qualification to practice the activity of Safety Engineer in Italy. 2005: Refresher course in Structural Engineering: on Great structures in lamellar wood: design and technology 2005: Refresher course in Structural Engineering: on Maintenance plan: quality and duration of materials 2005: Refresher course in Plants Engineering: on Thermo Higrometric verify of buildings 2005: Refresher course in Environmental Engineering: on Soil safeguard with environmental engineering 2006: Refresher course in Urban Engineering: on the light in the urban spaces and in the old town Catanzaro (Italy). 2007: Refresher course in Structural Engineering: on Structural designing and new technical standards 2008: Refresher course on Safety Engineering: on safety in the work s world and contractors responsibility Gimigliano, pag. 2 di 8

3 2008: Refresher course on Hydraulic Engineering: on Advances in Knowledge of Urban Drainage from the Catchment to the Receiving Water Technical Solutions in Stormwater Management University of Calabria, Cosenza (Italy). Career: : Collaboration in a Consulting and Designing Geotechnical Engineering Studio in Cosenza (Italy); cooperating in projects of retaining works, shallow and deep foundation structures, slopes retaining works and slopes stabilization : employed as director of the technical office of a General Contractor (Impresa IGIEMME S.p.A.) working all over national territory, with offices in Rome and Lamezia Terme (Italy) and having about 300 employed; making activity of project manager and designer (steel and reinforced concrete structures for industrial plants, geotechnics, roads, buildings) and consultant for the project managers of other contracts in the same Contractor (generally public works), directing and coordinating about 15 technicians (engineers, surveyors, CAD designers, accountants) till today: works as free professional partner in a Civil Engineering Studio named Serving2000 in Lamezia Terme, wich makes engineering services for public administrations and for privates contractors. Ability: He has a geotechnical engineer university formation and began to work in this field as research engineer; following professional experiences brought him to design and calculate strutctures and to design roads. Today he has a long experience (more then 20 years) in projecting and building roads, reinforced concretre structures (normal and prestressed), steel structures, bridges, shallow and deep foundations, retaining structures, soil works and soil stabilization. He has a good ability in people relationsheep; he is used to work with people having different formation and culture; he has good communication ability and great ability to manage human and thecnical resources in the aim to realize projects. He has a deep knowledge of computer and of several technical computing codes (road design, structure design, land survey, CAD, GIS etc.). Ing. Francesco MANCUSO Personal Info Name and Surname: Francesco MANCUSO Place and birth's date: Lamezia Terme (Italy), March 23 th, Citizenship: Italian. Education and Formation 1982: University bachelor degree (5 years degree in the italian university organization) in civil engineering (senior engineer, specialized in structures, bridges and transports) Calabria University (Cosenza Italy), with final note 102/ : qualification to practice the profession of Engineer in Italy. 1985: qualification to practice fire prevention engineering in according to italian technical rules; 1996: Course on safety in Catanzaro (Italy) for the qualification to practice the activity of Safety Engineer in Italy. 1996: member of Building Board (Commissione Edilizia) in Lamezia Terme Municipality; 1997: member of Consiglio dell Ordine degli Ingegneri della provincia di Catanzaro 1999: Course on safety in Catanzaro (Italy) for the qualification to practice the activity of Safety Engineer in Italy. 2005: Refresher course in Structural Engineering: on Great structures in lamellar wood: design and technology 2005: Refresher course in Urban Engineering: on Territory management and Urban Activity of Local Governments Lamezia Terme (Italy). 2005: Refresher course in Structural Engineering: on Maintenance plan: quality and duration of materials 2005: Refresher course in Plants Engineering: on Thermo Higrometric verify of buildings 2005: Refresher course in Environmental Engineering: on Soil safeguard with environmental engineering 2006: Refresher course in Urban Engineering: on the light in the urban spaces and in the old town Catanzaro (Italy). pag. 3 di 8

4 2008: Refresher course on Hydraulic Engineering: on Advances in Knowledge of Urban Drainage from the Catchment to the Receiving Water Technical Solutions in Stormwater Management University of Calabria, Cosenza (Italy). Career: : chief technical manager of a General Contractor (Impresa IGIEMME S.p.A.) working all over national territory, with offices in Rome and Lamezia Terme (Italy) and having about 300 employed till today: works as free professional partner in a Civil Engineering Studio named Serving2000 in Lamezia Terme, wich makes engineering services for public administrations and for privates contractors. Ability: He has a structural civil engineer university formation. Today he has a long experience (more then 25 years) in projecting and building roads, reinforced concretre structures (normal and prestressed), steel structures, bridges. He has a good ability in people relationsheep; he has good communication ability and great ability to manage human and thecnical resources in the aim to realize projects. He has a deep knowledge of computer and of several technical computing codes (road design, structure design, land survey, CAD, GIS etc.). Main jobs (the most recents) Project management and design activity Project management and design for the following contracting and contractors: Ericsson Telecomunicazioni S.p.A. Roma (Italy); Enterprise Digital Architects S.p.A. Roma (Italy); C.M.G. Bram S.r.L. Lamezia Terme (Italy): civil works for telecomunications plants: project and work design of steel truss towers with height from 5 mt to 70 mt, and tubular piles for antennas (5 40 mt high); shelters and buildings for TLC plants, located in Middle Italy, Southern Italy and Sicily. ANAS S.p.A. Roma (Italy): project and work design of roads, reinforced concrete structures, retaining structures, bridges, geotechnics. SACAL S.p.A. (Calabrian Society for Lamezia Terme International Airport Management) Lamezia Terme (Italy): projects and design for: transformation of the taxiway in a new runway (10L/28R);level adjustement of Lamezia Terme airport strip and R.E.S.A. area;civil works for full hold baggage check plant; civil works for lenghtening of the Lamezia Terme Airport runway 10/28; oil removing plant for rain water coming from Lamezia Terme Airport apron; hangars for wide body aircrafts. T&T S.p.A. Roma (Italy): project for civil works connected to functional improvement of Lamezia Terme Airport (Hangars, steel and r.c. structures,lighthouse towers, etc.) GET S.r.l. Milano (Italy); Ancinale Idroelettrica S.r.l. Bari (Italy): project for an hydroelectric plant on the Ancinale river in Middle Calabria (civil works, weir, tunnel, ditch, piping, reservoir, penstock, power station); Gizzeria Municipality Gizzeria, Catanzaro Italy: project for main sewer trunk line of the Gizzeria Municipality. Amministrazione Provinciale di Catanzaro Catanzaro (Italy): project and work design of roads, reinforced concrete structures, retaining structures, bridges, geotechnics. Municipality of Gizzeria (Italy): project and work design of a sewer line 8 km long for the drainage of the built up central area of Gizzeria; Municipality of Lamezia Terme (Italy): project and work design of drainaged, reinforcements and retaining works (shafts) to consolidate a large landslide in the north side of Lamezia Terme territory. Project, design and project management developed for many italian General Contractors for projects ofof roads, reinforced concrete structures (normal and prestressed), steel structures, retaining structures, bridges foundations, geotechnics. Supervision of construction GET S.r.l. Milano (Italy); Ancinale Idroelettrica S.r.l. Bari (Italy): supervision of construction for an hydroelectric plant on the Ancinale river in Middle Calabria (civil works, weir, tunnel, ditch, piping, reservoir, penstock, power station); Ericsson Telecomunicazioni S.p.A. Roma (Italy); Enterprise Digital Architects S.p.A. Roma (Italy); C.M.G. Bram S.r.L. Lamezia Terme (Italy): supervision of construction for telecomunications plants (steel truss towers and piles for antennas; shelters and buildings for TLC plants). pag. 4 di 8

5 Amministrazione Provinciale di Catanzaro Catanzaro (Italy): supervision of construction for building of roads, reinforced concrete structures, retaining structures, bridges. General inspections, testings SACAL S.p.A. (Calabrian Society for Lamezia Terme International Airport Management) Lamezia Terme (Italy): general inspections and testing for:: - runway and taxiway plant wells with load tests in the Lamezia Terme Airport; - works for enlargement and restructuring the passenger station in the airport of Lamezia Terme. Follow photos of some jobs we made in the field of steel structures (steel truss towers for telecomunication plants) and in the field of renewable energies (hidroelectric plants) A steel pile 30 m high (Nocera Tirinese Italy) A truss tower 10 m high on the Matera Questura (Matera Italy) pag. 5 di 8

6 A truss steel tower for telecomunication 60 m high in Martinafranca (Taranto Italy) A truss steel tower for telecomunications 25 m high In Palmi (Reggio calabria Italy) A truss steel tower for telecomunications 60 m high in Monte Vergine (Avellino Italy) pag. 6 di 8

7 Titolo: SITO A.M. - MONTE REDENTORE Comune di MARTINAFRANCA (TA) Descrizione : PROGETTO ESECUTIVO TRALICCIO H 60 m SCHEMA UNIFILARE SCHEMA CARICO MASSIMO D'ANTENNE Esec.: Prog.: Appr.: Scala: 1:100 Data: Foglio : D.00 13/05/2004 Doc. Num.: GSL-04 : 09101/D00 Controllato Enterprise D.A. Rev: File: B - 15/02/2006 MRED_D00 A truss steel tower for telecomunications 70 m high in Monte Soro (Nebrodi Mountains - Sicily Italy) Hangar for medium capacity aircrafts (40m x 50m x 16 m h) in Lamezia Terme International Airport pag. 7 di 8

8 The weir of the Ancinale hidroelecrtic plant in Serra S.,Bruno (Vibo Valentia Italy) pag. 8 di 8