WORK SCOPE. Domains in which we work:
|
|
- Buck Hart
- 8 years ago
- Views:
Transcription
1 WORK SCOPE Engineering consulting, technical office, assistance and supervision in industrial works. We specialize in structures, civil works and industrial equipment. Domains in which we work: Industrial Buildings Warehouses and all types of industrial buildings: stores, workshops, general services, production services, administrative services, etc. Structures for industrial facilities Services supply: frames and towers for power supply, piping racks and supports, etc. Storage and bulk handling: bins, hoppers, conveyors, etc. Equipment support: structures for tanks, pressure vessel, machinery, etc. Structures for handling: gantry crane, overhead cranes, etc. Industrial equipment Atmospheric tanks, pressure vessels, piping systems, air ducts, etc. Industrial civil works Foundations required for structures and equipment: warehouses, buildings, various structures, bins and hoppers, tanks and pressure vessels, machinery foundations, cranes, etc. Industrial urbanizations works: paving, industrial floors, roads, storage areas, retaining walls, storage areas, overpasses, etc. Infrastructure services: dewatering and sewage treatment systems, water supply, fluid transport, buried pipelines and underground galleries, etc. Page 1 of 6
2 LIST OF SERVICES Client: Industries Technical assistance and basic engineering Technical support services and assistance as engineering expert in our domains of work: preliminary studies and designs, cost estimations, execution of basic engineering, technical specifications for requesting tenders, technical supervision of tenders, etc. Projects and works supervision Specialized technical services in our domain of work: technical control and inspection of project s documents, technical assistance and control during execution of works. Design of industrial structures covering all types common in the industries: steel, concrete, precast, composite, masonry and also with other structural materials. Resistance evaluation of existing structures when there is a change in the use and load condition, design of reinforcements and modifications adapting them to the new requirements. Mechanical calculations for industrial equipment and piping systems Design and mechanical calculations of industrial equipment: atmospheric tanks and pressure vessels. Mechanical analysis of piping systems: tensional states, thermal stress, deflections and movements, support design, etc. Foundations design and calculation Design and calculations of foundations for structures, industrial equipment and machinery, covering a wide variety of types: footings, beams, slabs, piles and micropiles, retaining walls, special designs, underpinning, etc. Geotechnical studies (by external specialist). Technical drafting of project s documents Complete technical drafting of projects for execution works and industrial facilities, as well as obtaining legal licences and permissions, including professional certification of documents: basic projects, execution projects, installation projects, industrialization projects, urbanization projects, safety and health studies, etc. Industrial activities Legalisation Complete technical drafting of projects for new establishment of industrial activities in which licences and permissions are required: industrial equipment, tanks and pressure vessels, bulk handling, piping systems, storage of chemicals and petroleum, dewatering and sewage disposal, fire protection, etc. Page 2 of 6
3 Industrial works supervision Technical supervision of industrial works and installations by qualified engineer: inspection and control of execution, checking materials quality, final certificates with professional certification, etc. Coordinator for safety and health matters at the project execution stage only in our own projects. Page 3 of 6
4 Client: Civil Works Contractors Technical assistance at tender stage Technical support services such as specialized engineering consulting at tender stage: studies and preliminary designs, pre-dimensioning of structures and foundations, bills of quantities, drafting technical documents, drawings and plans, etc. Technical assistance at works execution stage Technical consultancy services such as specialized engineering firm during execution of works: technical support to contingencies, calculations, project supervision and optimization, review of technical proposals from subcontractors, reporting technical s approvals, project modifications, calculations of special temporal structures, formworks, scaffolds, etc. Design and calculation of structures service, covering a wide variety of types: steel, concrete, precast, composite, masonry and also with other structural materials. Foundations design and calculation Design and calculations of foundations for structures, industrial equipment and machinery, covering a wide variety of types: footings, beams, slabs, piles and micropiles, retaining walls, special designs, underpinning, etc. Geotechnical studies (by external specialist). Collaborative engineering in turnkey contracts. Engineering services outsourcing of basic and detail engineering, drafting technical project s documents, technical supervision of works when contractors acts in turnkey contracts. Complete technical drafting of projects for execution works and industrial facilities, as well as obtaining legal licences and permissions, including professional certification of documents: basic projects, execution projects, installation projects, industrialization projects, urbanization projects, safety and health studies, etc. Technical supervision of industrial works and installations by qualified engineer: inspection and control of execution, checking materials quality, final certificates with professional certification, coordinator for safety and health matters at the project execution stage, etc. Page 4 of 6
5 Client: Metal Mechanical Sector Technical assistance at tender stage Technical support services such as specialized engineering consulting at tender stage: studies and preliminary designs, preliminary dimensioning of structures and foundations, bills of quantities, drafting technical documents, drawings and plans, etc. Encompassing several specialities within our scope: structures, tanks, pressure vessels, piping systems, ducts, supports, bins, hoppers, special pieces, etc. Technical office outsourcing Technical office outsourcing for the customer, absorbing peak workloads. Active and coordinated collaboration with theirs technical department in several tasks: assemblies and parts drawings, joints design, etc. Design and calculation of structures service, covering a wide variety of typologies in steel structures. Civil works design and calculation if it is required. Shapes and loads drawings. Mechanical calculations for industrial equipment and piping systems. Design and mechanical calculations of industrial equipment: atmospheric tanks and pressure vessels. Mechanical analysis of piping systems: tensional states, thermal stress, deflections and movements, support design, etc. Drafting calculation reports and technical specifications according to international standards for obtaining required certificates and/or CE marking. Collaborative engineering in turnkey contracts. Engineering services outsourcing of basic and detail engineering, drafting technical project s documents, technical supervision of works when contractors acts in turnkey contracts. Complete technical drafting of projects for execution works and industrial facilities, as well as obtaining legal licences and permissions, including professional certification of documents: basic projects, execution projects, installation projects, industrialization projects, urbanization projects, safety and health studies, etc. Technical supervision of industrial works and installations by qualified engineer: inspection and control of execution, checking materials quality, final certificates with professional certification, coordinator for safety and health matters at the project execution stage, etc. Page 5 of 6
6 Client: Engineering companies Design of industrial structures covering all types common: steel, concrete, precast, composite, masonry, etc. We can make static and dynamic analysis, buckling, fatigue, joints design, etc; according to the specific needs of each study. Calculations may be done with spreadsheets using classical formulation or using specialized software both matrix calculus and with finite element method (FEM). Application and verification under various national standards, European or internationals, depending on the project requirements. Type of service according to customer needs, from pre-dimensioning to complete calculation of all parts, drafting calculation reports, general and detailing drawings, list of materials, etc. Mechanical calculations for industrial equipment and piping systems. Calculations of industrial equipment: atmospheric tanks and pressure vessels. Mechanical analysis of piping systems: tensional states, thermal stress, deflections and movements, support design, etc. Application of various European and international standards: EN, ASME, API, DIN, etc. Calculations may be done with spreadsheets using classical formulations or using specialized software at finite element method (FEM). Type of service according to customer needs, from pre-dimensioning to complete calculation of all parts, drafting calculation reports, drawings and plans, list of materials, etc. Foundations design and calculation Design and calculations of foundations for structures, industrial equipment and machinery, covering a wide variety of types: footings, beams, slabs, piles and micropiles, retaining walls, special designs, underpinning, etc. Calculations may be done with spreadsheets using classical formulation or using specialized software both matrix calculus and with finite element method (FEM). Application and verification under various national standards, European or international, depending on the project requirements. Type of service according to customer needs, from pre-dimensioning to complete calculation of all parts, writing calculation reports, general and detailing drawings, list of materials, etc. Technical office outsourcing Technical office outsourcing for the customer, absorbing peak workloads. Active and coordinated collaboration with theirs technical department in several tasks: design, drawing and plans, calculations, etc. Information updated up to May 2010 Page 6 of 6
Scope of EN 1090-1 Clarification Document
Scope of EN 1090-1 Clarification Document This document has been submitted to the European Commission as the UK view on the scope of EN 1090-1. After discussions, including with the European Technical
More informationCHAPTER 2 QUANTITY TAKE-OFF
CHAPTER 2 QUANTITY TAKEOFF The quantity takeoff is an important part of the cost estimate. It must be as accurate as possible and should be based on all available engineering and design data. Use of appropriate
More informationDiscussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope
CEN/TC 135 N 686 European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung CEN/TC 135 Execution of steel structures and aluminium structures N 686 Secretariat:
More informationPROJECT COST ESTIMATES & FEASIBILITIES
PROJECT COST ESTIMATES & FEASIBILITIES Project Cost and budget management Project success elements Scope meet the scope defined for the project Budget It is within established budget Programme It is designed
More informationTECHNICAL SUPPORT OFFICE
TECHNICAL SUPPORT OFFICE OUTSOURCING TECHNICAL OFFICE Calle Barbieri, 3 13620 Pedro Muñoz Calle Socuellamos, 111 2º-A 13700 Tomelloso t 926 568 659 m 650 973 825 web: www.stecounlimited.es mail: info@stecounlimited.es
More informationSociedad de Calderería COALCA, S.A.
Sociedad de Calderería COALCA, S.A. 30 years mol!ng y"r projects Coalca was born in 1982 in order to offer effective solutions in the industrial and civil engineering scopes. It designs and manufactures
More informationStructural Failures Cost Lives and Time
Structural Failures Cost Lives and Time Recent failures of storage bins, silos and other structures highlight the need to increase awareness of hazards associated with these structures. Since 2010, one
More informationIntroduction. Eurocodes. Specification. Cost
Introduction Eurocodes Specification Cost Structural Eurocodes BS EN 1990 (EC0): BS EN 1991 (EC1): Basis of structural design Actions on Structures BS EN 1992 (EC2): BS EN 1993 (EC3): BS EN 1994 (EC4):
More informationProfessional Engineers Providing Structural Engineering Services In Buildings
GUIDELINE Professional Engineers Providing Structural Engineering Services In Buildings 1995 Published by Association of Professional Engineers of Ontario Revised 12/11/98 CONTENTS INTRODUCTION...3 PART
More informationRoss River Suspension Bridge Ross River, Yukon. Life Cycle Cost Analysis
DNA project managers planners architects engineers David Nairne + Associates Ltd Suite 250 171 W Esplanade North Vancouver British Columbia Canada V7M 3J9 T 604 984 3503 F 604 984 0627 E dna@ davidnairne.com
More informationTHE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION GROUP 867 ARCHITECTURAL, ENGINEERING AND OTHER TECHNICAL SERVICES Excerpt from CPCprov-en-Publication.doc - United Nation Statistic Division Group Class Subclass
More informationL_All_Vocatinal_Ed_Construction. Sector: Construction. Sr. No Specialisation Page No 1 Construction and Building Technology 02.
L_All_Vocatinal_Ed_Construction Sector: Construction Sr. No Specialisation Page No 1 Construction and Building Technology 02 1 P a g e 2 P a g e VOCATIONAL EDUCATIONAL QUALIFICATION FRAMEWORK (Sector -
More informationNational Council of Examiners for Engineering and Surveying. Principles and Practice of Engineering Structural Examination
Structural Effective Beginning with the April 2011 The structural engineering exam is a breadth and exam examination offered in two components on successive days. The 8-hour Vertical Forces (Gravity/Other)
More informationM.S. in Civil Engineering
M.S. in Civil Engineering M.S. in Civil Engineering Degree Requirements Students who do not have a bachelor's degree in civil engineering, but who want to obtain a master's degree in civil engineering
More informationVOLUME V GUIDELINES FOR DESIGN CONSULTANT TABLE OF CONTENTS APPENDIX B: MASTER CONSTRUCTION SPECIFICATIONS AND PREPARATION GUIDE, DIVISIONS 0-10
VOLUME V GUIDELINES FOR DESIGN CONSULTANT TABLE OF CONTENTS APPENDIX B: MASTER CONSTRUCTION SPECIFICATIONS AND PREPARATION GUIDE, DIVISIONS 0-10 SECTION B1: PREPARATION GUIDE B1.1 INTRODUCTION... B1-1
More informationBuildings Construction Procurement Strategy
Buildings Construction Procurement Strategy Graham Strickleton Site, Buildings and Power supplies Procurement Manager JOURNEE DEDIEE AUX INDUSTRIELS ET AUX MEMBRES DU RESEAU A.P.I Disclaimer: these slides
More informationUSE OF MICROPILES IN TEXAS BRIDGES. by John G. Delphia, P.E. TxDOT Bridge Division Geotechnical Branch
USE OF MICROPILES IN TEXAS BRIDGES by John G. Delphia, P.E. TxDOT Bridge Division Geotechnical Branch DEFINITION OF A MICROPILE A micropile is a small diameter (typically less than 12 in.), drilled and
More informationHYDROCARBON SPILLS PROCEDURE SIG-ENV-PR003
Page: 1 of 6 PROCEDURE SIG-ENV-PR003 Revision Approved Date Description 1 AV 01/04/99 New EP 2 AV 07/06/00 Revision of EP 3 AV 04/04/03 Revision of EP 4 Stuart Roseby DRAFT 5 Stuart Roseby 25/07/2005 Approved
More informationHanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
More informationEUROPASS DIPLOMA SUPPLEMENT
EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Proyectos de Obra Civil TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Civil Works Projects --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationEUROPASS DIPLOMA SUPPLEMENT
EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Proyectos de Edificación TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Construction Projects --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More informationSupplier ID: 26421. Local Office: GLASGOW 69 Buchanan Street Glasgow G1 3HL
M D & FOUNDATIONS MIDLANDS Supplier ID: 26421 MINI PILING PILING REINFORCED CONCRETE UNDERPINNING DRILLING & GROUTING SITE INVESTIGATION & PILE TESTING NATIONWIDE SPECIALIST PILING & FOUNDATION SERVICES
More informationMaterials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
More informationSUPPLEMENTAL TECHNICAL SPECIFICATIONS BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS
July 14, 2015 1.0 GENERAL BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS This work shall consist of furnishing all materials, equipment, labor, and incidentals necessary for conducting bi-directional
More informationList of Frequently Utilized Storage Tank Standards and Practices
List of Frequently Utilized Storage Tank Standards and Practices Below is a list of frequently used storage tank standards and practices from organizations that are referenced in 25 PA Code, Chapter 245.
More informationConstruction Technologies Career Field Pathways and Course Structure
Courses in Structural Systems (DD) Construction Technologies Career Field Pathways and Course Structure PATHWAY COURSES SUBJECT CODE Construction Technology-Core and Sustainable Construction 1 178000 Carpentry
More informationLOAD TESTING OF SOME NEW BRIDGES IN LATVIA
LOAD TESTING OF SOME NEW BRIDGES IN LATVIA Edmunds Akimovs, Civ.Eng., Bridge Engineer, Consulting Company Inzenierbuve, Address: Azenes st. 20, Riga, LV1048, Latvia. E-mail: eakimovs@inzenierbuve.lv Ainars
More informationA Solid Foundation Solution for Homeowners. from. Our products are made with 90% Recycled Material Down. Right. Solid. GREEN.
A Solid Foundation Solution for Homeowners from Our products are made with 90% Recycled Material Down. Right. Solid. GREEN. Stop the damaging effects of foundation settling... Sinking foundations, cracked
More informationDraft Table of Contents. Building Code Requirements for Structural Concrete and Commentary ACI 318-14
Draft Table of Contents Building Code Requirements for Structural Concrete and Commentary ACI 318-14 BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318 14) Chapter 1 General 1.1 Scope of ACI 318
More informationDesign and Build of Passenger Terminal Building North Extension At Macau International Airport (RFQ-198) Section 6 Bill of Quantities
At Macau International Airport (RFQ-198) Section 6 Bill of Quantities Bill Nr. 1 Preliminaries Bill Nr. 1 PRELIMINARIES NOTES : (1) The work shall be done during day time and night time according to CAM/ADA
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Centrum İş Merkezi Aydınevler Sanayi Cad. No:3 Küçükyalı - Maltepe 34854 ISTANBUL / TURKEY Phone : +90 216 518
More informationREVEWED BY: Ross Rogien B.O/P.R. ADDITIONAL REVIEW(S) REQ.-FIRE DEPT Y/N
PLAN REVIEW FOR: PROJECT NAME: OWNER: ARCH/DESIGNER: ADDRESS: Ph/Fx: Plans Dated: E-mail: Sealed By: Estimated Project Cost - $ REVEWED BY: Ross Rogien B.O/P.R. ADDITIONAL REVIEW(S) REQ.-FIRE DEPT Y/N
More informationIntroduction Building project management
Introduction Building project management Construction management 2. (BMEEPEKT601-BMEEPEKK601) 10-02-2011 Introduction Lecturers: Adrienn Lepel PhD István Vidovszky PhD Guest lecturers Requirements Two
More informationAPEC CAPABILITIES PROJECT MANAGEMENT / SUPPORT
PROJECT MANAGEMENT / SUPPORT Capital Cost Savings Construction Monitoring and Assistance In-Plant Production Assistance In-Plant Maintenance Assistance Procurement Assistance Project Cost Estimating o
More informationEngineered Material Handling. Overhead Bridge Cranes and Gantry Cranes
TM Engineered Material Handling Overhead Bridge Overhead and Gantry Bridge Cranes and Gantry Cranes Custom Engineered Crane Systems Gantry Cranes EMH builds a complete range of gantry cranes including
More informationPrestressed Concrete Pipe Fitness for Service and Repair
Prestressed Concrete Pipe Fitness for Service and Repair Rasko Ojdrovic rpojdrovic@sgh.com 781-907-9231 IAEA - EPRI 15 October 2014 www.sgh.com SGH Pipeline Experience More than 25 years of research, analysis,
More information1.2 Advantages and Types of Prestressing
1.2 Advantages and Types of Prestressing This section covers the following topics. Definitions Advantages of Prestressing Limitations of Prestressing Types of Prestressing 1.2.1 Definitions The terms commonly
More informationExceptional... Everytime!
Oil & Gas Exceptional... Everytime! Oil & Gas Industry With each Team Leader possessing 10 20 Years experience, BAR Engineering not only contributes high level engineering expertise, but also the practical
More informationSPED Piping Certification Guide (Revised: 12/05)
SPED Piping Certification Guide (Revised: 12/05) Overview A Professional Piping Designer (PPD) will obtain certification from SPED if he / she can demonstrate the required skills defined in this document.
More informationGEORGE J. CAMBOURAKIS, P.E., C. ENG. PRESIDENT & CHIEF STRUCTURAL ENGINEER
GEORGE J. CAMBOURAKIS, P.E., C. ENG. PRESIDENT & CHIEF STRUCTURAL ENGINEER Professional Experience: Pride and Passion in the Art of Structural Engineering since 1979. Professional Registration: Professional
More information3Dcities INDIA. www.3dcindia.com. Architecture and Engineering Outsourcing Company since 1999
3Dcities INDIA Architecture and Engineering Outsourcing Company since 1999 www.3dcindia.com We are an India based organisation provides a range of products and services linked to our core discipline of
More informationCannon T4 Modular Data Centres. For Outside Deployment & Challenging Environments
Cannon T4 Modular Data Centres For Outside Deployment & Challenging Environments A high performance, full specification Data Centre, up to Tier 4* resilience, instantly deployable A highly secure Data
More informationTwenty-four contracting services environmental claim scenarios you may not have thought about.
Environmental DIVISION Twenty-four contracting services environmental claim scenarios you may not have thought about. Contracting Services Environmental Liability Policy Great American Insurance Group
More informationLoads Tools Checks Reports
Loads Tools Checks Reports SDC Verifier or the Structural Design Code Verifier is a powerful postprocessor program with an advanced calculation core which works seamlessly with Siemens multi-solver, FEA
More informationBACHELOR OF SCIENCE IN CONSTRUCTION MANAGEMENT COURSE DESCRIPTION. General Education Core
BACHELOR OF SCIENCE IN CONSTRUCTION MANAGEMENT COURSE DESCRIPTION General Education Core COMM 1332: Fundamentals of Public Speaking Cr. 3. (1-2). Taught in large lecture and small group format. Beginning
More informationSafe & Sound Bridge Terminology
Safe & Sound Bridge Terminology Abutment A retaining wall supporting the ends of a bridge, and, in general, retaining or supporting the approach embankment. Approach The part of the bridge that carries
More informationSEISMIC RETROFITTING OF STRUCTURES
SEISMIC RETROFITTING OF STRUCTURES RANJITH DISSANAYAKE DEPT. OF CIVIL ENGINEERING, FACULTY OF ENGINEERING, UNIVERSITY OF PERADENIYA, SRI LANKA ABSTRACT Many existing reinforced concrete structures in present
More informationRepair and Remodeling Estimating Methods. 4th Edition. RSMeans
Brochure More information from http://www.researchandmarkets.com/reports/2214808/ Repair and Remodeling Estimating Methods. 4th Edition. RSMeans Description: This estimating guide for repair and remodeling
More informationBIM and Lean Construction Can BIM remove waste from construction processes?
Tekla European BIM Forum 2014 BIM and Lean Construction Can BIM remove waste from construction processes? Assoc. Professor Rafael Sacks What is Lean Construction? Waste in construction? Lean and BIM Synergies
More informationNAPCS Product List for NAICS 54134: Drafting Services
NAPCS List for NAICS 54134: Drafting Services National 54134 1 Drafting Producing detailed layouts, plans, drawings, illustrations, graphics or models based on engineering or architectural specifications,
More informationCivil. 2. City of Seattle Supplement to the Specification for Road, Bridge and Municipal Construction, most current addition.
Design Guide Basis of Design This section applies to the design and installation of earthwork and backfill. Design Criteria No stockpiling of excavation materials is allowed unless the Geotechnical Engineer
More informationThe Guidance for the Management of Safety for Construction Works in Japanese ODA Projects
Contents The Guidance for the Management of Safety for Construction Works in Japanese ODA Projects September 2014 Japan International Cooperation Agency (JICA) i Contents ii Contents The Guidance for the
More informationCONTRACT PRICE ADJUSTMENT PROVISIONS (CPAP)
CONTRACT PRICE ADJUSTMENT PROVISIONS (CPAP) Work Groups Composition and Weightings of Sub-indices CURRENT AS AT 1 JANUARY 2013 Issued by the CPAP Committee Distributed by the Association of South African
More informationJune 2007 CHAPTER 7 - CULVERTS 7.0 CHAPTER 7 - CULVERTS 7.1 GENERAL
7.0 7.1 GENERAL For the purpose of this manual, culverts are defined as structures that are completely surrounded by soil and located below the surface of the roadway parallel to the general direction
More informationDescription of Selected Services under the UN CPC system in which the EC made Market Access Commitments in the EPA
Description of Selected Services under the UN CPC system in which the EC made Market Access Commitments in the EPA 7471 Travel agency and tour operator services Services rendered for passenger travel by
More informationHATFIELD TOWNSHIP DEMOLITION PERMIT APPLICATION PROCEDURES
HATFIELD TOWNSHIP DEMOLITION PERMIT APPLICATION PROCEDURES A demolition permit is required for complete demolition of residential or non-residential structures. PART I Location of Property Complete address
More informationMAJOR LEARNING OUTCOMES ARCHITECTURE AND URBAN PLANNING 1ST CYCLE PROGRAMS GENERAL ACADEMIC PROFILE
MAJOR LEARNING OUTCOMES Faculty: Major: Course level: ARCHITECTURE ARCHITECTURE AND URBAN PLANNING 1ST CYCLE PROGRAMS GENERAL ACADEMIC PROFILE Positioning of major in the study area The major in Architecture
More informationIntroduction to Minimal Excavation Foundations
Introduction to Minimal Excavation Foundations What is a minimal excavation foundation? A construction technique that minimizes disturbance of the natural soil profile within the footprint of the structure
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Cevizli Mh. Tınaztepe Sk. Altınöz Apt. No:16 D.1-2-3-4-6 Maltepe 34846 ISTANBUL / TURKEY Phone : 0 216 651 08
More informationTunnelling & Underground. Specialists
Tunnelling & Underground Specialists Mined Tunnels Excavation at Ayer Rajah Avenue, Singapore Introduction Amberg & TTI Engineering Pte Ltd (AETTI) was established in Singapore in 2002 by Amberg Engineering
More informationSolutions for nuclear technology
Solutions for nuclear technology Corrosion resistant pipes Clad pipes Special pipes and components ready for installation Prefabricated piping / spools Vessels, tanks and columns Assemblies 2 NUCLEAR TECHNOLOGY
More informationHigh Strain Dynamic Load Testing of Drilled Shafts
Supplemental Technical Specification for High Strain Dynamic Load Testing of Drilled Shafts SCDOT Designation: SC-M-712 (9/15) September 3, 2015 1.0 GENERAL This work shall consist of performing high-strain
More informationFind job and training opportunities at SteadyGrowth.ca
3 4 Find job and training opportunities at SteadyGrowth.ca 5 6 7 8 9 10 11 12 13 14 Manitoba Trades What you do Program Entry Requirements Years to Complete Program Where the Jobs are Minimum Wages Apprentice
More informationNON-RESIDENTIAL BUILDING PERMIT PROCEDURES
TOWAMENCIN TOWNSHIP NON-RESIDENTIAL BUILDING PERMIT PROCEDURES PART I Location of Property Address, Zoning District, Parcel Number and Lot & Block must be provided on all applications. PARTS II thru VIII
More informationOlilo's AEC Design Services. SrinSoft Inc, Partners of
Olilo's AEC Design Services SrinSoft Inc, Partners of Olilo provides design services that include design and analysis, cost estimation, 3D modeling, 2D drafting, conversion from 2D to 2D, quantity take-off,
More informationTechnical Assignment 2 TABLE OF CONTENTS
2 TABLE OF CONTENTS Executive Summary...3 Introduction..5 Gravity Loads......6 Design Codes......7 Materials..8 Existing Structural System.. 10 Existing Floor System 15 Alternate Floor Framing Systems...17
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationDESIGN OF BLAST RESISTANT BUILDINGS IN AN LNG PROCESSING PLANT
DESIGN OF BLAST RESISTANT BUILDINGS IN AN LNG PROCESSING PLANT Troy Oliver 1, Mark Rea 2 ABSTRACT: This paper provides an overview of the work undertaken in the design of multiple buildings for one of
More informationQatar National Construction Standards 2010 Contents
1- General 01. Introduction 02. Use and Maintenance of the Site 03. Site Access and Entry onto the Site 04. Protection 05. Interference 06. Project Meetings 07. Submittals 08. Quality Assurance 09. Materials
More informationMARKET SCOUT CONTRACTORS QUESTIONNAIRE (complete in addition to an Acord application) 1. Applicant:
1. Applicant: 2. Type of all work performed by or for applicant (check You if performed by applicant and Subs if performed by subcontractors and both if done by both): Air Condition Systems Installation,
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More informationCurrent Status of Seismic Retrofitting Technology
CONTENTS Current Status of Seismic Retrofitting Technology Damages of Past Earthquakes Seismic Diagnosis Method Building Control Section Urban Building Division Bureau of Urban Development, TMG Seismic
More informationAnalysis II Façade Redesign: Architectural Precast Panels
Analysis II Façade Redesign: Architectural Precast Panels Analysis II Façade Redesign: Architectural Precast Panels Overview: This analysis covers the comparison of the current EIFS façade and my proposed
More informationMicropiles Reduce Costs and Schedule for Merchant RR Bridge Rehabilitation
Micropiles Reduce Costs and Schedule for Merchant RR Bridge Rehabilitation Jeff R. Hill, P.E. Hayward Baker Inc. 111 W. Port Plaza Drive Suite 600 St. Louis, MO 63146 314-542-3040 JRHill@HaywardBaker.com
More informationSection 8.1 Volume I QUALITY ASSURANCE PROGRAM OF PRECAST PRESTRESSED CONCRETE PRODUCTS
Section 8.1 Volume I QUALITY ASSURANCE PROGRAM OF PRECAST PRESTRESSED CONCRETE PRODUCTS 8.1.1 PURPOSE This procedure provides guidelines related to the implementation of quality control and quality assurance
More informationQS 004 DEPARTMENT OF PUBLIC WORKS REPUBLIC OF SOUTH AFRICA BUILDING COST DATABASE
DEPATMENT OF PUBLIC WOKS EPUBLIC OF SOUTH AFICA BUILDING COST DATABASE AUGUST 2012 DEPATMENT OF PUBLIC WOKS EPUBLIC OF SOUTH AFICA BUILDING COST DATABASE POJECT DATA SHEET NOTE Bills of Quantities Stage
More informationVirginia Approach Spans
Virginia Concrete Conference 2009 Woodrow Virginia Approach Spans David Tackoor, HNTB Formerly of URS Corp for Potomac Crossing Consultants Woodrow 1 Second Severn Crossing 2 Medway Crossing (Channel Tunnel
More informationHow to Estimate the Cost of Support of Excavation for Foundation Installation. CPE Candidate No. 0113013. May 15, 2013
How to Estimate the Cost of Support of Excavation for Foundation Installation CPE Candidate No. 0113013 May 15, 2013 1 How to Estimate the Cost of Support of Excavation for Foundation Installation Table
More informationCLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials
More informationSteel construction. Miscellaneous steel. Industrial structures. www.graitec.com
Steel construction Miscellaneous steel BIM SOFTWARE FOR STRUCTURAL STEEL ENGINEERING, DETAILING AND FABRICATION www.graitec.com Industrial structures Advance Steel is specifically designed for structural
More informationIssue of the Guidelines on Prevention of Water Seepage in New Buildings
graphic: Buildings Department Your REF 來 函 檔 號 :. OUR REF 本 處 檔 號 :.BD GR/1-55/173 FAX 圖 文 傳 真 :..28400451 TEL 電 話 :..2626 1717 www.info.gov.hk/bd To : All Authorized Persons 7 March 2005 Registered Structural
More informationQuantity Take-off. Quantity Take-off
Quantity Take-off Required Information for Cost Estimate Detailed drawings Specifications Available site data Available resource data (labor, material & equipment) Government regulations Applicable owner
More informationHitachi s Involvement in Nuclear Power Plant Construction in Japan
Hitachi s Involvement in Nuclear Power Plant Construction in Japan 48 Hitachi s Involvement in Nuclear Power Plant Construction in Japan Naoki Kajiyama Kenji Hamamura Koichi Murayama OVERVIEW: To protect
More informationTechnical Analysis and High-End Structural Design
Capability Statement (Infrastructure & Buildings) Services ABES provides design and sub-consulting services in Australia and internationally. We are able to provide our services in a wide range of applications
More information1,045 m length of the Deh Cho Bridge
Innovative Design Features: Lightweight truss: The principles of lightweight design led to a saving of 25% in the use of structural steel. State of the art deck system: Designed as a four-way slab, it
More informationDesign and Construction of Cantilevered Reinforced Concrete Structures
Buildings Department Practice Note for Authorized Persons, Registered Structural Engineers and Registered Geotechnical Engineers APP-68 Design and Construction of Cantilevered Reinforced Concrete Structures
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationWATERPROOFING SikaProof -A TECHNOLOGY
SikaProof -A TECHNOLOGY content What is SikaProof -A? 6 How does it work? 8 Where can it be used? 0 What are the advantages of SikaProof -A? 2 How should it be installed? SikaProof -A system components
More informationEAST LYME HIGH SCHOOL
Overview: 1971 N 1966 GYM 1966 CLASSROOM WING 1966 AUD. 1971 GYM 1998 1998 POOL EAST LYME HIGH SCHOOL Original 1966 Building: The original East Lyme High School was constructed in 1966 and was composed
More informationMark Cramer Inspection Services, Inc.
Mark Cramer Inspection Services, Inc. 492 Twentieth Avenue, Indian Rocks Beach, FL 34635-2970 (727) 595-4211 Fax (727) 596-7583 Certified Member #12085 American Society of Home Inspectors Construction
More informationContractor s Statement of Responsibility for Seismic-Force-Resisting Systems This form is to be filled out by the contractor.
SPECIAL INSPECTION PROCEDURE IBC CHAPTER 17 2012 EDITION When Required All projects that require a SC licensed Architect or Engineer per SC Architectural and Engineering registration law. Overview The
More informationMechanical Engineer. Process Engineer. Civil Engineer. PFD 001 - Inlet works and screening 40.0 27. PFD 002 - Membrane Bioreactor 34.
1.00 Site Visit / Data Gathering Scope definition & design verification,inspection of the site, Collation of information, Condition report and priorities, Cost estimates and Preliminary programme 35.5
More information2000 Bachelor of Science in Civil Engineering University of Central Florida, Orlando, Florida
ENGINEER: CIVIL/STRUCTURAL NICHOLAS K. PONTILLO, P.E. Engineering Design & Testing Corp. Post Office Box 40026 Overland Park, Kansas 66204-0926 Telephone: (913) 859-9580 npontillo@edtkc.com EDUCATION:
More informationجامعة البلقاء التطبيقية
AlBalqa Applied University تا سست عام 997 The curriculum of associate degree in Air Conditioning, Refrigeration and Heating Systems consists of (7 credit hours) as follows: Serial No. Requirements First
More informationAmendment to OPSS 415 (Nov 2008) Construction Specification for Pipeline and Utility Installation by Tunnelling
Engineering and Construction Services Division Standard Specifications for Sewers and Watermains TS 415 April 2013 Amendment to OPSS 415 (Nov 2008) Construction Specification for Pipeline and Utility Installation
More informationSikaProof A Technology
SikaProof A Technology The fully bonded waterproofing system Keep your basements durably and securely watertight What is SikaProof A? How does it work? Where can it be used? What are the advantages of
More informationEvaluating Construction Management Techniques for an Electrical Transmission Station
Evaluating Construction Management Techniques for an Electrical Transmission Station Scope of Work Andrew Canniff and Christopher O Connor Table of Contents Introduction... 3 Project Description... 3 Background...
More informationDr. K.N.Jha Department of Civil Engineering Indian Institute of Technology Delhi Block V, Room No. 322 knjha@civil.iitd.ac.in
1 Some case studies of construction accidents in India Special emphasis on safety of temporary structures Dr. K.N.Jha Department of Civil Engineering Indian Institute of Technology Delhi Block V, Room
More informationHelical Piles. A Practical Guide to Design and Installation
Brochure More information from http://www.researchandmarkets.com/reports/2216946/ Helical Piles. A Practical Guide to Design and Installation Description: An unbiased, comprehensive review of helical pile
More information