BOLT-ON TOOLS PARTS LIST. Parting Tool. 25mm 1 1/4" 32mm. Extended BLANK 1 1/4" 1 1/2" 2" 32mm. 40mm 50mm BLANK. Twin Turn.
|
|
- Brice Blake
- 8 years ago
- Views:
Transcription
1 Bolt-On Tool Holders ST-0 (Y) 1 station turret ST-30(Y) 1 station turret DS-30(Y) 1 station turret SL-0 10 Station Turret SL-0/30 10 and 1 station turret SL station turret ( up to ug 1, 001) TL-series 1 station 6 BOT + 6 VDI Basic BOT ID Tool Specifications.50 Face Grooving Boring Bar SL0/ SL (SL-0) Size Parting Tool Size BOT0F/G BOT0MFG-5 SL-0 only BF11 BMF3 BOT 0ID BTS Max bore:.0" BOT0ID-1 BOT0MID-5 BOT0ID-1_1/ BOT0ID-1_1/ BOT0ID- BOT0MID-3 BOT0MID-0 BOT0MID-50 BOT0MID BTS Max bore: 50mm BOLT-ON TOOLS PRTS LIST 1" 5mm 1 1/" 3mm BLNK 1" 1 1/" 1 1/" " 3mm 0mm 50mm BLNK Twin Turn Extended Parting Tool BOT0OD-1* BOT0MOD-5* Height ():.15" (5.6 mm) BOT0EXTOD-1* BOT0EXTMOD-5* Height (): 3.75" (83. mm) BOT0OD-1T* BOT0MOD-5T* 1 5mm 1 5mm 1 (x) 0mm(x) Twin Bore B Extended Twin Bore B SL-0 only B1 BM50 BOT0ID-3/T* BOT0MID-0T* Dim. : 1.5" btw. centers (38.1 mm) Dim. B: 3.8" (96.5 mm) BOT0EXTID-3/T* BOT0EXTMID-0T* Dim. : 1.5" btw. centers (38.1 mm) Dim. B: 5.5" (133. mm) 1/" 50mm 3/ (x) 0mm (x) 3/ (x) 0mm (x) Extended Twin Turn Height ():.15" (5.6 mm) BOT0EXTOD-1T* BOT0EXTMOD-5T* Height (): 3.75" (83. mm) 1 (x) 0mm(x) Page 1
2 Bolt-On Tool Holders Continued ST-0 (Y) 1 station turret ST-30(Y) 1 station turret DS-30(Y) 1 station turret SL-0 10 Station Turret SL-0/30 10 and 1 station turret SL station turret ( up to ug 1, 001) TL-series 1 station 6 BOT + 6 VDI Basic BOT ID Tool Specifications (SL-0) BOLT-ON TOOLS PRTS LIST " Size Coolant Block Size Boring Bar Sleeve Turret Face Clamps SL-0 only BS3 BS1 BS11 BS BMS 0 BMS5 BMS3 BMS0 BOT0OD/CLMP (Clamp Block SL10**/0/30 BOT0MOD/CLMP 3/" 1" 1 1/" " 0mm 5mm 3mm 0mm 1" a 5mm Nozzles Wedge Clamp CB0 SL10**/0/30 CB0 SL0 CB0M (incl. metric bolts) CB0M (incl. metric bolts) º Str long Plug Str º BOT0WEDGE BOT0MWEDGE INCH METRIC BOT0OD/CLMP (Clamp Block SL0) BOT0MOD/CLMP 1 1/" a 3mm Page
3 ST-10 / SL-10 1 Station Turret 3 5 Basic BOT ID Tool Specifications " BOLT ON TOOLS PRTS LIST Face Grooving Size BOT10F/G 3/" BOT10MF/G 0mm SL-10 Standard Tooling Includes: 1 BOT10 ID-1 1 BOT10 ID-1-1/ 1 BOT 10 F/G 3 BOT 10 OD/Clamp Boring Bar 5-1 BOT10ID-1 1" BOT10ID-1_1/ 1 1/" BOT10MID-3 3mm Kit (Recommended) Standard BOTKIT10 ea. BOT10ID-1_1/ ea. BOT10ID-1 1ea. CB 10 9ea Turret Face Wedge/Clamps Cooling Block CB10 CB10M Inch BOTKIT10M ea. BOT10MID-3 1ea CB10M 9ea. Turret face Wedge/Clamps Turret Face Wedge Clamps BOT10OD/CLMP BOT10MOD /CLMP Inch Nozzles Str long Plug Str Page 3
4 Haas Turret HS TURRET TOOLS PRTS LIST Size THID-1/ 1/" THID-3/ 3/" THID-1 1" THID-1_1/ 1 1/" THID-1_1/ 1 1/" THID-1_3/ 1 3/" THID- " THID-0MM 0mm THID-5MM 5mm THID-3MM 3mm THID-0MM 0mm Tool Wrench TW ( ) THER3 ER3 Eccentric daptor VDIE THBLK Max bore:" (0mm) BLNK Used for fine adjustment of standard 0mm VDI tools in the Haas Turret. THOD-3/ 3/" THOD-3/ LH 3/"LH THOD-1 1" THOD-1LH 1" THOD-1_1/ 1 1/" THOD-1_1/_LH 1 1/"LH THOD-1X 1" (Extended) THOD-5MM 5mm THOD-5MMLH 5mmLH VDI Tools not included VDI Page
5 11 VDI Turret Haas VDI Turret DIN VDI 0 Left Hand (Type B, B, B6, B8) SL-0/30/0, ST 0/30 1 Haas VDI Turret DIN VDI 30 Left Hand (SL-10) VDI 0 Left Hand (ST-10) (Type B, B, B6, B8) VDI TURRET TOOLS PRTS LIST 1" Short Turn QTY. 1" Long Turn * VDITHKIT 1 1 1/" Boring 3 Plugs * Not sold individually Page 5
6 Live Tooling LIVE TOOLING OPTION PRTS LIST xial Mill/Drill 1,,5 HLT-HTH 3 HLT-VTH HLT-HLT0BV Max Tool Size ER-3 Collet 3/" (0mm) Radial Mill/Drill 1,,5 HLT-RHTH HLT-RVTH 3 HLT-RHLT0BV 3/" 0mm ER-3 1 Haas Turret SL-0/30 VDI SL-0, TL-series ST 0/30 (SS/Y), DS-30 (SS/Y) 3 VDI SL-0/30 Haas Turret / VB SL-0 5 VB/ VB ST-0/30 (SS/Y), DS-30 (SS/Y), SL-0/30, TL-15/5 Page 6
7 VTC Tools VTC TOOLS PRTS LIST Turning Facing Tool Size THV15T 1.5" Boring Tool THV175B 1.75 Page 7
8 Mini Lathe Tool Holders MINI LTHE TOOL HOLDERS Twin Tool Boring Holder Size MLTID-3/T MLTMID-0T 3/ (x) 0mm(x) O.D. Tool holder MLTOD-1/ MLTMOD-1 1/ 1mm Page 8
9 Toolroom and GT Lathe Tool Holders Kit includes a quick-change tool post (mounting hardware included), turn/face tool holders and 1 boring bar holder GT Lathe Riser Block Tool Post TL-1 and TL- TP 3/ (Includes: () 3/" Turn/Face Holders (1) 1" Boring Bar Holder TP 3/-GT (TP 3/ + Riser for GT Lathes) TP0 (Includes: () 0mm Turn/Face Holders (1) 5mm Boring Bar Holder TP0-GT (TP0 + Riser for GT Lathes) TL-3 and TL-3W TP1 (Includes: TP5 (Includes: () 1" Turn/Face Holders (1) 1-1/" Boring Bar Holder () 5mm Turn/Face Holders (1) 3 Boring Bar Holder TL-3B TP1-1/ (Includes: () 1-1/" Turn/Face Holders (1) " Boring Bar Holder TP0 (Includes: Boring Bar Tool Holder vailable Sizes: 1" (Fits TP3/) 1 1/" (Fits TP1) " (Fits TP1-1/) 5mm (Fits TP5) 3mm (Fits TP5) 50mm (Fits TP0) () 0mm Turn/Face Holders (1) 50mm Boring Bar Holder Turn/Face Tool Holder vailable Sizes: 3/" (Fits TP3/) 1" (Fits TP1) 1-1/" (Fits TP1-1/) 0mm (Fits TP0) 5mm (Fits TP5) 0mm (Fits TP0) 3.06" Gang Tooling (GT-0 Only) vailable Sizes: GTK1 1" (BOT5ID-1) GTK5 5mm (BOT5MID-5) Gang Tooling Top View Page 9
10 TT0 8 Station Turret 3 Basic BOT ID Tool Specifications " BOLT ON TOOLS PRTS LIST Face Grooving Size BOT5F/G 3/" BOT5MF/G 0mm TT0 fits GT-10, GT-0 TT0-3 fits TL-3, TL-3CE, TL-3HE* *TT0-3 does not fit TL-3W TT0 Standard Tooling Includes: 3 BOT5ID-1 5 BOT 10 OD/Clamp Boring Bar Turret Face Wedge Clamps BOT5ID-1 1" BOT5MID-5 5mm BOT10OD/CLMP BOT10MOD /CLMP Inch Kit (Recommended) Standard BOTKIT5 3ea. BOT5ID-1 1ea. BOT5F/G 3ea. Turret Face Wedge/Clamps BOTKIT5M 3ea. BOT5MID-5 1ea. BOTFMF/G 3ea. Turret face Wedge/Clamps Page 10
11 VB Face Grooving BOLT-ON TOOLS PRTS LIST Size Parting Tool Size BOTFG-3/ BOTMFG-3/ 3/" 0 mm BOTOD-3/ BOTMOD-0 3/ 0 mm Height():.3" (58. mm) Boring Bar BOTID-1 BOTMID-5 BOTID-1_1/ BOTMID-3 1" 5 mm 1-1/" 3 mm Extended Parting Tool BOTEXTOD-3/ BOTEXTMOD-0 Height ():.55" (115.6 mm) 3/ 0 mm Twin Bore BOTID-3/T BOTMID-0T 3/ 0mm Extended Twin Turn BOTEXTOD-3/T BOTEXTMOD-0T 3/" 0 mm B Dim. :.15" btw. centers 5.6 mm Height (): 3.55" (89.5 mm) Extended Twin Bore B Dim. B:." mm BOTEXTID-3/T BOTEXTMID-0T Dim. :.15" btw. centers 5.6 mm Dim. B: 5.35" mm 3/ 0mm Facing Tool Kits BOTODF-3/ BOTMODF-0 BOTKIT BOTKITM 3/" 0 mm Inch Page 11
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationDriven & Static Tooling HAAS
Driven & Static Tooling HAAS Haas Driven & Static Haas Tools 3 Table of Contents Haas Tooling SL20, SL30 Standard VDI Turret Driven Tools SL20, SL30 Haas Turret Driven Tools SL20, SL30, TL15, TL25 Hyrbid
More informationDriven & Static CONTENT. Overview... Mazak Tooling... Mori Seiki Tooling... Nakamura Tooling... Driven & Static. Tooling Rebuild service...
205 CONTENT 207 Citizen Tooling.............. 209 Daewoo Tooling............. 217 Haas Tooling................ 221 Mazak Tooling............... 223 Mori Seiki Tooling.......... 249 Nakamura Tooling..........
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationMORI SEIKI SL150 - SL150S SPECIAL TOOLHOLDERS
MORI SEIKI SL150 - SL150S SPECIAL TOOLHOLDERS 64 MORI-SEIKI SL150-SL153-ZL150-CL150-SL154 B27042 B27044 Direct mounting on turret 20x20 mm KMS-T00108 (Only for CL-150) 128-12032 KMS-T00080 KMS-T00078 Cut-off
More informationStatic and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
More informationturning instead of measuring
PARAT -way-indexing-quickchange turret-toolpost turning instead of measuring Indexing accuracy 0,005 mm (0,0002 ) Internal and external operations in one setting Quick-clamping System with 0 Positions
More informationVDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819
VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,
More informationEuropean Master Dealer
UK PRICE LIST 2012 European Master Dealer & Haas & Mazak STATIC DRIVEN Feb. 2012 www.gerardi.it INDEX Lathe Types Pag. - SL 20, SL 30 STANDARD VDI 40 TURRET 4 - SL20, SL30 - HAAS TURRET - SL20, SL30, TL15,
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationGang Type CNC Turning Center. KIT Series
Gang Type CNC Turning Center KIT Series The Best Suitable for Automation Line Gang Type CNC Lathe BASIC STRUCTURE Bed Guide Way Spindle & Block Tool Gearless Type Spindle High Frequency Spindle Motor KIT
More information3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
More informationContents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI
ISO 9001:2008 Contents 1. Driven Coupling Type VDI system DIN 1809 DIN 5480 DIN 5482 SPUR MT TOEM (BARUFFALDI) HAAS BMT system 1809 5480 MORI SEIKI 2. Turret Type Radial Turret Axial Turret 3. Driven Tool
More informationVDI30/VDI40 Static Tool Holders
VDI30/VDI40 Static Tool Holders CAT2013-VDI-STATIC MAR.2014 Lyndex-Nikken VDI30 Static Tool Holders Part #: VDI30-OD75X-B2 Left Hand Short Radial Turning Tool Part #: VDI30-OD20MX-B2 Left Hand Short Radial
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationStatic Toolholders for CNC Turning Machines
Static Toolholders for CNC Turning Machines Table of Contents Type Page Combi Toolholder Boring Bar Holder Turning Tool Holder Combi Outer Turning Toolholder Combi Turning Toolholder for facing QUICK TURN
More informationHYDRO-FIX hydraulic clamping system. For boring bars and driven tools
HYDRO-FIX hydraulic clamping system For boring bars and driven tools Improve your productivity HYDRO-FIX hydraulic clamping system has successfully been used for over 15 years. HYDRO-FIX is excellent for
More informationHow to select toolholding
ow to select tool holding ow to select toolholding eneral Turning ow to select toolholding 1 Select a coupling size - Turn to the ordering page and select the right coupling size. CParting and rooving
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationQUICK-CHANGE tool system for multi-tasking and turning lathes
System solution from SISSTOOLS Tool system for upper turning-/milling spindles System solution from SISSTOOLS Increase productivity by reducing nonproductive time Very quick tool changing time SISS TOOLS
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationMachine Tool Equipment
COLLEGE OF WESTERN IDAHO Invitation to Bid (ITB) Machine Tool Equipment Dated: April 30, 2012 Response Due: May 14, 2012 At 5:00 p.m. Deliver to: College of Western Idaho Attn: Glen Harris ITB - Machine
More informationTool Holder for CNC Lathes ISO 9001:2008 ID 9105040234
SO 9001:2008 9105040234 Tool older for CNC Lathes 1. pplication Radial Turret xial Turret 2. riven Tool older is produced in accordance with N69880 N69880 1 h6 2 3 1 max 2 0.05 3 min R 0.02 L1 max L2 0.05
More information4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580
PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation
More informationLathe Series Training Manual. Live Tool for Haas Lathe (including DS)
Haas Factory Outlet A Division of Productivity Inc Lathe Series Training Manual Live Tool for Haas Lathe (including DS) Created 020112-Rev 121012, Rev2-091014 This Manual is the Property of Productivity
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationCNC MACHINES. Page 1 of 6
2 Deckel Maho - DMU 50 evo Linear Deckel Maho - DMU 50 evo Linear Full 5 Axis Machining Center Full 5 Axis Machining Center > X-axis 500mm - 9.6" > X-axis 500mm - 9.6" > Y-axis 450mm - 7.7" > Y-axis 450mm
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationModel 60L. 2) Click on appropriate Service Notice
Service Notices Model 60L 1) Select the Bookmark option 2) Click on appropriate Service Notice Service Notice Numbering and Tracking System The following layout is using a single part number for reference
More informationKOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.
KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationI-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
More informationACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationHIGH SPEED SPINDLE MOTORS
DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationis decisive if contour turning is involved.
Toolholder selection The clamping system of the insert in the toolholder should be selected first. Toolholders have been ed to provide optimum performance in different applications and usually over a broad
More informationPRODUCT DIVISION: CNC-Education Concept TURN 250 DATE: October 2012 page 1 of 26 TECHNICAL SPECIFICATION. Concept TURN 250
DATE: October 2012 page 1 of 26 TECHNICAL SPECIFICATION Concept TURN 250 PC-controlled CNC - lathe with interchangeable control WinNC Control Software SINUMERIK OPERATE SIEMENS 810D/840D SIEMENS 810/820
More information2008:1 Supplement Volvo
2008:1 Supplement Volvo Scan-Tech Sweden Volvo Catalog Supplement 2008:1. Model Engine Year O/E Ref Part No Application Description Engine V70XC 1997~00 9161101 51.1101 AWD Engine Mount S40/V40 4-Cyl.Petrol,
More informationDRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT10M)
DRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT0M) 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More informationOperating Instructions
Operating Instructions Sauter Tooling for more information, please consult www., and for the complete standard tooling programme, please visit www.sauter-tools.com Sauter: The world turns with us! Table
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationPPM HYDRAULIC PRESSBRAKES
PPM HYDRAULIC PRESSBRAKES PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered,
More informationTerminal blocks Gross Automation (877) 268-3700 www.entrelecsales.com sales@grossautomation.com
Short Form Catalogue Terminal blocks Gross utomation (877) 268-3700 www.entrelecsales.com sales@grossautomation.com guide guide SCREW CLMP TERMINL BLOCKS FEED THROUGH SWITCH FOR NEUTRL GROUND DOUBLE CIRCUIT
More informationA Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationRINGFEDER. RINGFEDER Products are available from MARYLAND METRICS
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130
More informationCAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50
Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationTooling technology. BENZ LinTec broaching units + for turning centers / lathes + for machining centers METAL MACHINING. www.benz-tools.
Tooling technology BENZ LinTec broaching units + for turning centers / lathes + for machining centers METAL MACHINING AT BENZ WERKZEUGSYSTEME, OUR MAXIM, "INNOVATION. PRECISION. PASSION." IS FAR MORE THAN
More information7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary
7. Bearing Fits 7. Fitting For rolling s, inner and outer rings are fixed on the or in the housing so that relative movement does not occur between fitting surfaces during operation or under. This relative
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More informationKELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
More informationTool dynamometers 2 and 3 component tool dynamometers for measurement of cutting forces in drilling, turning and milling processes
Tool dynamometers 2 and 3 component tool dynamometers for measurement of cutting forces in drilling, turning and milling processes Neu: Multimedia product presentation Tool dynamometer drilling : "BKM2000"
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationBolt-on castor set B
12/2010 Original Operating Instructions 999285502 en-gb Please retain for future reference Bolt-on castor set B rt. n 586168000 2008 models onward Basic drawings of product Product description The Bolt-on
More informationProduct Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
More informationmeans: Multitasking at its best. HYPERTURN 95/110 The new generation of multitasking machines for the highest levels of productivity and flexibility
[ E[M]CONOMY] means: Multitasking at its best. HYPERTURN 95/110 The new generation of multitasking machines for the highest levels of productivity and flexibility HYPERTURN 95/110 [Main spindle] [Control
More informationCHAPTER E. DOC (Depth of cut) t max Bore Ø.031
Step #1: stablish bore diamter Step #2: Find Depth of Cut (DOC) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths CHAPTR DOC (Depth
More information[ means: Precision and reliability - in series. EMCO MAXXTURN 95. Universal turning center for machining of shaft- and chuck work
[ E[M]CONOMY] means: Precision and reliability - in series. EMCO MAXXTURN 95 Universal turning center for machining of shaft- and chuck work EMCO MAXXTURN 95 [Control unit] - Ergonomically designed - Sinumerik
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationROMI GL 240 ROMI GL 240M ROMI GL 280 ROMI GL 280M. Technical Specifications ROMI GL 240 / GL 280
ROMI GL 240 ROMI GL 240M ROMI GL 280 ROMI GL 280M Technical Specifications Turning enters ROMI GL 240 / GL 280 Technical specifications Romi GL 240 Romi GL 240M Romi GL 280 Romi GL 280M apacity Swing over
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationStarChip 400. StarChip 400. More productive, more cost-effective - the Inclined Bed Lathe StarChip. CNC Inclined Bed Lathe. www.knuth.
CNC Inclined Bed Lathe More productive, more cost-effective - the Inclined Bed Lathe StarChip Center width 550 mm Turning diameter over bed (max) 360 mm Speed range 50-6000 min -1 8-station tool turret
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationInvacare REA Dahlia 45 Transit Dealer Max User Weight 135Kg (21 stone)
Invacare Ltd Manual Prescription Form Pencoed Technology Park Dealer Prescription Form Pencoed CF35 5AQ LPF1U2READAHLIA140515Dealer Tel: +44 (0) 1656 776222 Fax: +44 (0) 1656 776220 July 2015 email: ordersuk@invacare.com
More informationAdjustment Data MAZDA - 626-2.0 Comprex D - RF-CX
Adjustment Data MAZDA - 626-2.0 Comprex D - RF-CX Engine (general) Engine code RF Capacity 1998 (cc) Idle speed 725 ± 25 Valve clearance Valve clearance Cold Inlet 0.25 (mm) Exhaust 0.35 (mm) Compression
More informationHow To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
More informationEngine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
More informationTUBE-AUGER Tube End Prep Machine Kit For ¾ 3 Tube ID (EP443010)
TM-33 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque controls
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationPARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
More information88-98 Chevy / GMC Fullsize 4WD 6-Lug 2"- 2 1/2" Suspension Lift Installation Instructions
88-98 Chevy / GMC Fullsize 4WD 6-Lug 2"- 2 1/2" Suspension Lift Installation Instructions Safety Glasses Metric / Standard Wrenches & Sockets Floor Jack Jack Stands Hack Saw Ball Joint Seperator Measuring
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationPrintrbot Getting Started Guide. For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr
Printrbot Getting Started Guide For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr Contents 4 Chapter 1: Welcome 4 Overview 4 Support 5 Chapter 2: Your Printrbot has arrived... now what? 5
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationSWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL BASKETBALL GAMES ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 Canby,
More information[ means: Easy handling for large parts. EMCO MAXXTURN 95 / 110. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMy] means: Easy handling for large parts. EMCO MAXXTURN 9 / 11 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 11 [Control unit] - Ergonomic, pivotable and slidable
More informationCS20/25 INSTRUCTION MANUAL
INVERTED VERTICAL TURNING CELL CS20/25 INSTRUCTION MANUAL 57 SPECIFICATION SEIKI - SEICOS 21L Edition 2.02 Hitachi Seiki Deutschland Werkzeugmaschinen GmbH Introduction Thank you for your having purchased
More informationECOplus Solar Cylinder
TECHNICAL INFORMATION Solar Cylinder Wagner& Co Connection Options for CONVECTROL II The Effective Convection Brake Technically and fluidically optimized barriers separate the water cooled in the pipes
More informationPrintrbot Getting Started Guide. For models: Simple
Printrbot Getting Started Guide For models: Simple Contents 4 4 4 5 5 5 6 6 6 6 7 8 Chapter 1: Welcome Overview Support Chapter 2: Your Printrbot has arrived... now what? Printrbot Kits Pre-Assembled Printrbots
More informationwww.clausing-industrial.com MultiTurn CNC Combination Lathes Advanced Turning Technology
www.clausing-industrial.com MultiTurn CNC Combination Lathes Advanced Turning Technology MultiTurn The highly versatile flat bed design handles a wide range of turning applications: long shafts, bar stock,
More informationThe teach-in lathe. New generation SE
The teach-in lathe New generation SE New generation SE Description Friendly user lathes with high chip removal capacity The SE Series combines the working capacity of a conventional lathe with the advantages
More information16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
More informationVector Frame Monitor Kiosk 02
Vector Frame Monitor Kiosk 02 VF-MK-02-SS VF-MK-02-DS Vector Frame TM monitor kiosks are a sleek, stylish way to display media at any trade show, event, in a retain or corporate space. These new kiosks
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.
More informationSolenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
More informationInstallation and Assembly: Desktop Mount with Desk Clamp and Grommet for 19" - 30" LCD Screens
Installation and ssembly: Desktop Mount with Desk Clamp and Grommet for 19" - 30" LCD Screens Models: LCT100S GROMMET INSTLLTION DESK CLMP INSTLLTION Max Load Capacity: 20 lbs (9 kg) 2300 White Oak Circle
More information