PPM HYDRAULIC PRESSBRAKES
|
|
|
- Gervase Chad Young
- 8 years ago
- Views:
Transcription
1 PPM HYDRAULIC PRESSBRAKES
2 PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered, high quality and most of all an economical affordable pressbrake. Our PPM pressbrakes can easily be adapted to the specific needs of our customer offering a wide range of tooling and backgauges. Unique positive depth setting The PPM machine has a unique design with mechanical positive depth stops incorporated in the hydraulic cylinders for very accurate depth stroke adjustment (0.01 mm). Motorised adjustment controlled by 2 pushbuttons and electronic read-out conveniently located at the pendant control station. Standard features Options - Mechanical equilibration by means of a heavy-duty solid antitorsion bar. - Mechanical depth stops incorporated in the cylinders for long life. - Pendant control panel. - Infinitely motorised depth adjustment by 2 pushbuttons from the control panel with electronic read-out. - Easy infinitely adjustable ram stroke. - Adjustable open height. - Adjustable speed change-over point. - Pressure control with electronic adjustment and read-out. - Manual (jog mode)and automatic cycle selector switch. - Movable foot pedal control. - Short sectional tool holders to secure tool clamping. - Filled oiltank. - Instruction and maintenance manuals. - Service tools. - Safety fences and light curtains according to CE safety specifications. - Motorised backgauge stroke. - Standard stroke: - for 400 kn and 750 kn: 650 mm. - for other tonnages: 800 mm. - Backgauge stroke up to 1000 mm. - Central manual adjustable anti deflection tables. - Frontstops. - Different tooling configuration. - Hydraulic top tool clamping. - Groove for single V-dies. - Hour meter. - Stroke counter. Ram parallelism Parallelism of the upper beam is maintained through an anti-torsion bar system. This solid torsion bar links both ends of the ram and maintains parallelism throughout the entire stroke even if off-centre loadings occur. Stroke adjustment Adjustable mechanical cams at the operators side of the brake to set the upper position and work speed change point. In case of ATL550 control, an extra cam sets the retraction of the backgauge.
3 Anti deflection tables Angular variations caused by beam and table deformation can be compensated by the anti deflection table fitted directly onto the lower beam. It works by means of wedges moving progressively over each other, giving the table the desired crown in order to compensate for the beam and bed deflection. This results in a constant angular profile of the workpiece over the full working length of the machine. The anti deflection table can be set independently from the machine type or execution and in combination with different tool systems. Tooling Haco tooling A budget friendly tool system specifically designed for each machine capacity. The multi V-die combines flexibility by having different V-openings into 1 die and easy tool turning. The top bending tool is available in different versions: flexible gooseneck tool 86, straight tools of 86, 30, 60 or 180, in full length or sectioned. System tooling System tooling is available in a wide range of different bottom and top tools, to adapt the machine to almost any specific job. System tooling is manufactured to the smallest tolerances in standard lengths of 835 and 415mm so they can be put together to get bigger lengths. System bottom tooling in combination with an anti-deflection table results in a machine with the highest degree of accuracy. Anti deflection table for haco-dies. Anti deflection table for system-dies. CNC control ATL550 (only up to 1500 kn) Simple to programm basic control for conventional PPM pressbrake. Electronic digital readout of depth stop position and working pressure. Preselection mode: automatic positioning of backgauge and depth stop to the preselected position. - Positioning of backgauge X mm. - Positioning of depth stop Y mm. Programming mode: possibility to make several programmes in which the backgauge and depthstop are positioned automatically after each step (bend). - Programming X and Y (in depth only). - Memory capacity: max. 200 programmes - max. 400 steps. Single V-dies Single V-dies are available in a large variety of angles and V-openings. The small width/height ratio allows improved access for the workpiece around the die. Single V-die clamping uses a groove in either a Haco or a System tool table. By using the groove as a self alignment system, the toolchange can be reduced to very little time. V = 6-15 = 86/88 V = = 86/88 V = = 30
4 H A I Technical specifications Haco reserves the right to change any specifications without prior notice. B J C E D G F TYPE WORKING CAPACITY DISTANCE GAP DAYLIGHT STROKE TABLE FAST APPROACH MAX. WORKING FAST RETURN MOTORPOWER MAX. TOTAL TOTAL TOTAL WEIGHT LENGTH BETWEEN HOUSINGS OPENING HEIGHT SPEED SPEED SPEED PRESSURE LENGTH WIDTH HEIGHT A B C D E G H I J mm 400 kn 1100 mm 195 mm 295 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 4,1 kw 180 bar 2100 mm 1450 mm 2100 mm 2500 kg mm 400 kn 1600 mm 195 mm 295 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 4,1 kw 180 bar 2450 mm 1450 mm 2100 mm 3000 kg mm 400 kn 2100 mm 195 mm 295 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 4,1 kw 180 bar 2900 mm 1450 mm 2100 mm 3500 kg mm 600 kn 1600 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 5,6 kw 265 bar 2450 mm 1450 mm 2100 mm 4000 kg mm 600 kn 2100 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 5,6 kw 265 bar 2900 mm 1450 mm 2100 mm 4200 kg mm 600 kn 2600 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 5,6 kw 265 bar 3500 mm 1450 mm 2100 mm 4500 kg mm 750 kn 1600 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 7,5 kw 330 bar 2450 mm 1450 mm 2100 mm 4400 kg mm 750 kn 2100 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 7,5 kw 330 bar 2900 mm 1450 mm 2100 mm 4700 kg mm 750 kn 2600 mm 200 mm 280 mm 100 mm 840 mm 70 mm/s 8 mm/s 55 mm/s 7,5 kw 330 bar 3500 mm 1450 mm 2100 mm 5100 kg mm 1000 kn 2100 mm 250 mm 325 mm 120 mm 875 mm 70 mm/s 7 mm/s 60 mm/s 5,6 kw 220 bar 2900 mm 1700 mm 2240 mm 6900 kg mm 1000 kn 2600 mm 250 mm 325 mm 120 mm 875 mm 70 mm/s 7 mm/s 60 mm/s 5,6 kw 220 bar 3500 mm 1700 mm 2240 mm 7400 kg mm 1000 kn 3150 mm 250 mm 325 mm 120 mm 875 mm 70 mm/s 7 mm/s 60 mm/s 5,6 kw 220 bar 4100 mm 1700 mm 2240 mm 8200 kg mm 1000 kn 3150 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 5,6 kw 220 bar 4400 mm 1700 mm 2430 mm 9100 kg mm 1000 kn 3750 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 5,6 kw 220 bar 4700 mm 1700 mm 2800 mm kg mm 1350 kn 2100 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 7,5 kw 300 bar 2900 mm 1700 mm 2280 mm 7400 kg mm 1350 kn 2600 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 7,5 kw 300 bar 3500 mm 1700 mm 2280 mm 7800 kg mm 1350 kn 3150 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 7,5 kw 300 bar 4200 mm 1700 mm 2280 mm 8800 kg mm 1350 kn 3150 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 7,5 kw 300 bar 4400 mm 1700 mm 2430 mm 9800 kg mm 1350 kn 3750 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 7,5 kw 300 bar 4700 mm 1700 mm 2800 mm kg mm 1500 kn 2100 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 11,4 kw 330 bar 2900 mm 1700 mm 2280 mm 7700 kg mm 1500 kn 2600 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 11,4 kw 330 bar 3500 mm 1700 mm 2280 mm 8200 kg mm 1500 kn 3150 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 11,4 kw 330 bar 4100 mm 1700 mm 2440 mm 9300 kg mm 1500 kn 3150 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 11,4 kw 330 bar 4400 mm 1700 mm 2430 mm kg mm 1500 kn 3750 mm 250 mm 325 mm 120 mm 915 mm 70 mm/s 7 mm/s 60 mm/s 11,4 kw 330 bar 4700 mm 1700 mm 2800 mm kg mm 1750 kn 2100 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 15,0 kw 235 bar 2900 mm 1900 mm 2800 mm 8500 kg mm 1750 kn 2600 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 15,0 kw 235 bar 3500 mm 1900 mm 2800 mm kg mm 1750 kn 3150 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 15,0 kw 235 bar 4200 mm 1900 mm 2800 mm kg mm 1750 kn 3150 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 15,0 kw 235 bar 4400 mm 1900 mm 3000 mm kg mm 1750 kn 3750 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 15,0 kw 235 bar 4700 mm 1900 mm 3000 mm kg mm 2000 kn 2100 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 265 bar 2900 mm 1900 mm 2800 mm 9000 kg mm 2000 kn 2600 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 265 bar 3500 mm 1900 mm 2800 mm kg mm 2000 kn 3150 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 265 bar 4200 mm 1900 mm 2800 mm kg mm 2000 kn 3150 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 265 bar 4400 mm 1900 mm 3000 mm kg mm 2000 kn 3750 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 265 bar 4700 mm 1900 mm 3000 mm kg mm 2250 kn 2600 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 300 bar 3500 mm 1900 mm 2800 mm kg mm 2250 kn 3150 mm 300 mm 450 mm 200 mm 965 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 300 bar 4100 mm 1900 mm 2800 mm kg mm 2250 kn 3150 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 300 bar 4400 mm 1900 mm 3000 mm kg mm 2250 kn 3750 mm 300 mm 450 mm 200 mm 1090 mm 80 mm/s 9 mm/s 80 mm/s 18,7 kw 300 bar 4700 mm 1900 mm 3000 mm kg mm 2600 kn 2600 mm 330 mm 500 mm 250 mm 1100 mm 80 mm/s 6 mm/s 65 mm/s 18,7 kw 270 bar 3600 mm 2100 mm 3440 mm kg mm 2600 kn 3150 mm 330 mm 500 mm 250 mm 900 mm 80 mm/s 6 mm/s 65 mm/s 18,7 kw 270 bar 4200 mm 2100 mm 3440 mm kg mm 2600 kn 3150 mm 330 mm 500 mm 250 mm 900 mm 80 mm/s 6 mm/s 65 mm/s 18,7 kw 270 bar 4600 mm 2100 mm 3440 mm kg mm 2600 kn 3750 mm 330 mm 500 mm 250 mm 900 mm 80 mm/s 6 mm/s 65 mm/s 18,7 kw 270 bar 4800 mm 2100 mm 3440 mm kg mm 3000 kn 2600 mm 330 mm 500 mm 250 mm 1100 mm 80 mm/s 6 mm/s 65 mm/s 22,5 kw 310 bar 3600 mm 2100 mm 3100 mm kg mm 3000 kn 3150 mm 330 mm 500 mm 250 mm 940 mm 80 mm/s 6 mm/s 65 mm/s 22,5 kw 310 bar 4200 mm 2100 mm 3100 mm kg mm 3000 kn 3150 mm 330 mm 500 mm 250 mm 940 mm 80 mm/s 6 mm/s 65 mm/s 22,5 kw 310 bar 4600 mm 2100 mm 3500 mm kg mm 3000 kn 3750 mm 330 mm 500 mm 250 mm 940 mm 80 mm/s 6 mm/s 65 mm/s 22,5 kw 310 bar 4800 mm 2100 mm 3500 mm kg
5 Large sheetworking programme Hydraulic shears Conventional and CNC controlled. Up to 32 mm. Hydraulic steelworkers 4 and 5 station universal steelworkers for punching, shearing flat, angle and bar cutting, notching. Up to 1600 kn. Angle notchers Fix and variable angle. Up to 6 mm. HACO nv Oekensestraat 120 B-8800 Rumbeke (Belgium) tel. +32 (0) fax +32 (0) sales@haco.com your Haco dealer: Haco reserves the right to change any specifications without prior notice and reserves the right to correct any clerical and typographical errors. F.PPM.E mm/
Servo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204
Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced
Sheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
TruBend: More. bending. freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology
TruBend: More bending freedom Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Precise bending. More flexible than ever before. The TRUMPF Group is one of the world s leading
ROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
SPECIAL FEATURES. Air- Electric Clutch Control. Extended Beds and Rams
, SPECIAL FEATURES Extended Beds and Rams Beds and rams can be extended at both ends or at one end only for closing or "homing" operations. Extensions at both ends of the machine provide greatly increased
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com Supercharge your Fence & Gate Manufacturing Only $3,650! Vogel s 25 Ton Power Tower Model Tonnage Power Requirements Power Connection
Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
Makina ve Teknik Mlz. San. Ve Tic. Ltd. Sti.
SECTION AND PIPE BENDING MACHINES MODEL UPB 10 - - Two Rolls powered - Special cast frame - Shafts are hardened with special steel material - Roll are special steel material - hardened and ground - and
Maxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
Machining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
Press Release. Superior bending
Superior bending An array of new features makes TRUMPF s new TruBend Series 5000 more productive and user-friendly than ever before. Using a new control concept, the machines are amazingly easy to operate.
DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
Bystronic Tools. Laser Bending Waterjet bystronic.com
Bystronic Tools Laser Bending Waterjet bystronic.com Overview about the icons used in this catalogue Material / Hardness max. permitted load method of tool loading Content nature of load max. box depth
IoRW Meeting in Derby 11 th of May 2011. Schlatter Industries AG Rail Flash Butt Welding Machines. Speaker: Jürg Wahrenberger
IoRW Meeting in Derby 11 th of May 2011 Rail Flash Butt Welding Machines Speaker: Jürg Wahrenberger Brandstrasse 24 CH-8952 Schlieren Phone: +41-44-732 7111 Fax: +41-44-732 4550 Presentation Chapters 1.
2 Axis Solar Tracker / 12 Kw
2 Axis Solar Tracker / 12 Kw 4 Rows 14 metres 4 rows x 14 metres Quantity / Panel Type: 68 units Photovoltaic panel 1.600 x 790 mm Panel power / Total power: 165 W 11,2 Kw Total Surface: 94 m² Diameter
P R E S S B R A K E S PPEC
P R E S S R K E S PPEC P P E C Precision Hydraulic Press rakes M eeting the demands of a constantly changing marketplace requires flexibility, reliability and the use of advanced production techniques
CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES
CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES S T R I P P I T P - S E R I E S Efficient & Productive L VD Strippit s P-Series CNC turret punch presses offer a high level of efficiency and productivity in
More bending freedom.
TruBend: More bending freedom. Machine Tools / Power Tools Laser Technology / Electronics The best bending solutions. Contents The best bending solutions. 2 Why TruBend is better. 4 TruBend Series 3000
TL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
How To Build A Powerplant With A Powerplant
CNC-Processing Center Venture 108 2014/2015 Venture 108 Highlights: Routing dimension in Y direction: 1550 mm Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum
Removing chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
website: www.fathaco.com
SHORT HISTORY OF FAT-HACO FAT Haco offers you the benefit of our vast experience since the year 1945 over 5. machine tools have been sold in many countries around the world! Excellently equipped machine
Stock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
WERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
Easy Machining Center Setup
White Paper Document No. MWA-072-EN_01_1404 April 2014 Easy Machining Center Setup Using FANUC s Direct Input of Workpiece Origin Setting Measured and Tool Length Measurement features to easily establish
C N C T U R R E T P U N C H P R E S S E S STRIPPIT V-SERIES
C N C T U R R E T P U N C H P R E S S E S STRIPPIT V-SERIES S T R I P P I T V - S E R I E S Powerful Production Performance H igh level production applications demand high productivity, durability, easy
DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
DRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
SITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
CNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
MINSTER SERIES P2. Piece-Maker BULLETIN 130B
MINSTER SERIES P2 Piece-Maker BULLETIN 130B MINSTER SERIES P2 Automatic Straight Side Presses Every operation involved in the building of a Minster Piece-Maker press, from pouring of castings to final
Company LOGO. Gizelis Group. Company Profile 2010. www.gizelis.com. www.company.com
Company Profile 2010 Gizelis Group The Facts- Company History Dominant presence in Sheet Metal Processing Industry for over 50 years Founded by Stamatios Gizelis in the 1960 s 1 9 6 0 1 9 7 0 1 9 8 0 1
303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
Providing Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
Turning centers. Mill Turn Lathes. With the most powerful control in industry: SingleMax
Turning centers Mill Turn Lathes With the most powerful control in industry: SingleMax TMi General purpose- and heavy duty-lathes > TM 6 i > TM 8 i > TM 10 i > TM i > TM 18 i > TM 18 Li Benefits of the
[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
Belt Drives and Chain Drives. Power Train. Power Train
Belt Drives and Chain Drives Material comes for Mott, 2002 and Kurtz, 1999 Power Train A power train transmits power from an engine or motor to the load. Some of the most common power trains include: Flexible
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
Belt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
Industrial Robotics. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will learn the basics of industrial robot technology and how robots are used in a variety of manufacturing
MULTITURRET BAR TURNING B446-465 T2 B446-465 T3
MULTITURRET AR TURNING 446-465 T2 446-465 T3 Double-spindle and double-turret turning centres featuring two Y-axes: from bar to the finished part 446-465 T2 years after the launch of the first QUATTRO
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
E08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
HOLZMA HPP 350 with Cadmatic 4.0
Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for
Aluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
![That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance](/thumbs/30/13966838.jpg "That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance")
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
Cutting and Shearing die design Cutting die design
Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired
Milling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
Turning Centres. MAX 5 From print to part to profit
Turning Centres MAX 5 From print to part to profit TMi and TMXi General purpose, heavy duty and high performance 2 axis lathes > TM6i > TM12i > TM8i > TM18i > TM10i > TM18Li > TMX8i > TMX10i Benefits of
EVOLUTION 7405. Complete CNC Machining in Compact Format. provides for complete machining on all 4 workpiece edges as well as the surface.
Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Complete CNC Machining in Compact Format EVOLUTION 7405 Unique! The EVOLUTION 7405 4mat provides for complete machining
PORTIO. Intelligent Portion Cutter. High speed cutting: Fixed weight, fixed thickness. High precision, minimal give-away.
Intelligent Portion Cutter PORTIO High speed cutting: Fixed weight, fixed thickness High precision, minimal give-away Flexible software Easy to clean Labor saving options Features PORTIO 1 Principle Automatic
EVOLUTION 7403 7405. Complete CNC Machining in Compact Format. provides for complete machining on all 4 workpiece edges as well as the surface.
Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Complete CNC Machining in Compact Format EVOLUTION 7403 7405 Unique! The EVOLUTION 7405 4mat provides for complete
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
Technical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
Weeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
Routers and machining centres
Routers and machining centres Safe working practices HSE information sheet Introduction This information sheet gives practical guidance on safe working practices when using CNC routers and machining centres,
Pole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
Feed systems. Effective handling
Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of automatic wire processing machines operates at high rates of acceleration and speed. This places maximum demands on
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
STORAGE DESIGN LIMITED CNC
CNC System The CNC range from bott provides secure storage and allows safe transport of tooling in manufacturing environments. A range of options is available to suit all standard types of CNC tooling.
V-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision
Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled
Newland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
Multibend-Center RAS 79.22-2 / RAS 79.26-2
RAS Reinhardt Maschinenbau GmbH High-tech perfection! If you want to produce complex sheet metal parts regardless of batch size, with incredible throughput, total flexibility, amazing accuracy, and total
Cityline Express. CITYLINE EXPRESS 4 Page Newspaper Offset Press
CITYLINE EXPRESS 4 Page Newspaper Offset Press us on dules very ility les ents. ingle stable,000 ased ready LINE inting ents, sures is proo date cessr r CITYLINE CITYLINE EXPRESS puts puts puts its its
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
HM325 - PRODUCTION CRIMPER
HM325 - PRODUCTION CRIMPER As a reliable classic machine, the HM325 unites all the outstanding properties of a production er. It is compact, powerful and makes ergonomic working possible. Combining a convincingly
Architectural Specifications* MODEL HDE
MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page
EPC 3x-X ERNIPRESS CENTER Hydropneumatic Press with pneumatic control. Operating manual EPC 31-X EPC 33-X EPC 35-X EPC 37-X. 19.03.
EPC 3x-X ERNIPRESS CENTER Hydropneumatic Press with pneumatic control Operating manual EPC 31-X EPC 33-X EPC 35-X EPC 37-X 19.03.2008 / BA_EPC 3x-X Copyright Copyright The technical documentation consists
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
DESIGN OF SLABS. 3) Based on support or boundary condition: Simply supported, Cantilever slab,
DESIGN OF SLABS Dr. G. P. Chandradhara Professor of Civil Engineering S. J. College of Engineering Mysore 1. GENERAL A slab is a flat two dimensional planar structural element having thickness small compared
Procedures for daily inspection and testing of mechanical power presses and press brakes
Procedures for daily inspection and testing of mechanical power presses and press brakes INTRODUCTION This leaflet gives guidance on the minimum safety checks that should be carried out on mechanical power
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8
MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits
Product Data Sheets. Belt Conveyor System
Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
YEARS OF INDUSTRY EXPERIENCE. NOW AVAILABLE GLOBALLY.
YEAS OF INDUSTY EXPEIENCE. NOW AVAILABLE GLOBALLY. Wilson Tool Conventional Press Brake tooling is engineered to meet the needs of Sheet Metal Fabricators around the world. We have the ability to manufacture
304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
CNC TURRET PUNCH PRESSES STRIPPIT S-SERIES
CNC TURRET PUNCH PRESSES STRIPPIT S-SERIES STRIPPIT S-SERIES Performance & Economy T he Strippit S-Series of CNC turret punch presses from LVD Strippit combine high performance with economy to offer flexible
Strippit PX-Series PUNCH, BEND, TAP AND FORM. Sheet Metalworking, Our Passion, Your Solution. www.lvdgroup.com ENERGY SYSTEM REDUCTION
Strippit PX-Series PUNCH, BEND, TAP AND FORM ENERGY REDUCTION SYSTEM Sheet Metalworking, Our Passion, Your Solution 1 STRIPPIT PX-SERIES Punch, form, bend and tap on a single machine The Strippit PX-Series
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
accord 20 fx CNC machining centre
accord 20 fx CNC machining centre accord 20 fx CNC machining centre New-generation modular machining centre designed for machining operations involving heavy duty stock removal with high precision and
PLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
CNC Gantry-Processing Centers Vantage 100
CNC Gantry-Processing Centers The compact nesting machine in gantry design Our CNC processing centers are already offering the technology of the future. Why? Tradition.»Made in Germany«is our motivation
S40. The Allrounder for complex grinding jobs.
S40 The Allrounder for complex grinding jobs. Advantages S40 Dimensions Distance between centres 1000/1600 mm (39.4 /63 ) Height of centres 175/225 mm (6.9 /8.9 ) Maximum workpiece weight 130/150 kg (286/330
Invacare REA Dahlia 45 Transit Dealer Max User Weight 135Kg (21 stone)
Invacare Ltd Manual Prescription Form Pencoed Technology Park Dealer Prescription Form Pencoed CF35 5AQ LPF1U2READAHLIA140515Dealer Tel: +44 (0) 1656 776222 Fax: +44 (0) 1656 776220 July 2015 email: ordersuk@invacare.com
ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
Belt Conveyor Tracking V-Guide vs. Crowned Roller
Belt Conveyor Tracking V-Guide vs. Crowned Roller By: Michael A. Hosch P.E. Dorner Mfg. Corp. 1 One of the largest maintenance issues associated with belt conveyors is belt tracking. Belt tracking is the
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
TA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a