D-LINK DPH-140S SIP PHONE INSTALLATION GUIDE
|
|
- Philippa Atkins
- 8 years ago
- Views:
Transcription
1 pag.1 D-LINK DPH-140S SIP PHONE INSTALLATION GUIDE
2 pag.2 SUMMARY SKYPHO VOIP SERVICE...3 DPH-140S PACKAGE CONTENT...3 DEVICE PHYSICAL CONNECTION...4 ACCESS TO THE DEVICE...6 Accesso to the IP Phone when the DHCP is working...6 Access to the IP Phone when the DHCP service is not working...7 WEB BROWSER CONFIGURATION...9 LAN Parameters...9 VoIP Parameters...10 Configuration saving...12 D-LINK DPH-140S IP PHONE CONFIGURATION PARAMETERS...13
3 pag.3 SKYPHO VOIP SERVICE The use of SKYPHO VoIP (Voice Over IP) service is simple and quick. You need only an Internet access, the DPH-140S IP Phone and with few clicks you could use the new telephone line with the quality equal to the traditional landline. To use the SKYPHO s VOIP service, you need: - One computer with an Ethernet port - One modem/router with a LAN port - One Internet access; - One Username and one Password (account SIP). The SIP account is the registration made on SKYPHO s server that allows to the user to access the VoIP services provided by the server itself. It is composed by a Username, coincident with the telephone number you have been assigned and a Password (confidential access code) by which you can access the Skypho telephone services. LOOK OUT! The confidentiality of this data is necessary in order to guarantee that the service will be accessed only by you. For your major safety, you can choose a new password by accessing on Skypho s registration site. DPH-140S PACKAGE CONTENT One DPH-140S IP Phone One Ethernet cable (1,8 meters) One power adapter One installation CD Rom IP Phone DPH-140S Ethernet cable Power adapter Wall Mount Installation CD-ROM
4 pag.4 DEVICE PHYSICAL CONNECTION First of all, you have to make the physical connection of the device, following the simple instructions hereafter included: Insert the Ethernet cable in the PC port of the DPH-140S Connect the other end of the cable to the Ethernet port of your PC Connect the power adapter to the wall socket Insert the Ethernet cable to the LAN port of your DPH-140S Connect the other end of the cable to your LAN (Hub/Modem/Router) Internet Here below you can find the layout for the physical connection of the device.
5 pag.5
6 ACCESS TO THE DEVICE pag.6 Once the connection is completed, you can proceed with the D-LINK DPH-140S configuration. Verify that on your router the DHCP service is either in Enable status (DHCP allows the network administrator to distribute IP addresses when a computer is plugged into a different place in the network) or in Disable status (this means that in your LAN the IP addresses are used in a static way). Then, follow the suitable configuration instructions. Accesso to the IP Phone when the DHCP is working 1. verify that the LAN port of your PC is configured in order to obtain an IP address automatically. Click on Start \ Settings\ Network connections, double click on Local area connections (LAN). In the new window, click on Properties and then double click on Internet Protocol (TCP/IP). Verify that the option Obtain an IP address automatically is activated or modify the setting and press OK. At the end, you can close all the opened windows. 2. press MENU on the IP Phone keyboard to assign the IP address to your D-LINK DPH-140S. You will see Display Name: on the IP Phone display: insert the telephone number assigned by Skypho during registration. Press the key, you will see ADSL DIALUP: on the IP Phone display, press the key to set it on DISABLE, if it is already in this status go to the following step. Press the key, you will see DHCP on the IP Phone display, press the key to set it on ENABLE. Your DPH-140S will make an automatic update of the settings and it will show DHCP; again in the ENABLE status. At this point your Voip configuration is finished, press MENU and OK to exit the configuration. Access your router configuration and between the LAN or DHCP Client information and check which Ip address has been assigned to your D-LINK DPH-140S and write it down (in the following example the address is ). 3. open your Web Browser (ie. Internet Explorer), insert the IP address of your D- LINK DPH-140S - (in the example ) and press GO.
7 4. Leave Username and Password blank as you are installing the phone for the first time and press OK. pag.7 Look out!! The confidentiality of this data is necessary in order to guarantee that the equipment configuration is accessible only by you. We suggest to proceed with the configuration password change and to write it down by using the Web Login Configuration. 5. After few seconds it will appear the D-link DPH-140S Voip Phone page where you can modify the configuration parameters of your D-LINK DPH-140S, as indicate in the following chapter. LOOK OUT!: The changes are going to be effective only after the saving ( Update ) and restart ( Reboot ) of your IP Phone, as indicated in this manual. Access to the IP Phone when the DHCP service is not working 1. configure the static IP address (in the example ) on the LAN port of your PC. Click on Start \ Settings\ Network connections, double click on Local area connections (LAN). In the new window click on Properties and then double click on Internet Protocol (TCP/IP). Verify that the option Use the following IP address is activated, or modify the setting and fill in the following fields: IP Address: x with x different from 1 and 3 (the last one is the default IP we assigned to the Voip Telephone). For example Subnet Mask: Gateway predefinito: For DNS servers, it should be used the IP addresses provided by the Internet Service Provider. Once finished the configuration, press OK and close all the opened windows.
8 2. configure the static IP address on your IP Phone. Press MENU, use the cursor to go down and digit the telephone number you have been assigned by Skypho on the Display Name:. Press the key, it will appear ADSL DIALUP:, press the key to set it on DISABLE, in the case it is in ENABLE status. Press the key, it will appear DHCP, press key to set it on DISABLE, in the case it is in ENABLE status. Press key, it will appear IP Address, digit the IP address that you have chosen (ie ). Press the key, it will appear Subnet Mask:, digit the network connection data (ie ). Press the key, it will appear Voip Router:, digit the default Gateway you will find in the network connection (ie ). Press the, it will appear DNS Server IP, digit the IP addresses provided by the Internet Service Provider. Press the key, it will appear SNTP Server IP:, insert the IP address , press MENU, then OK. Your SIP DPH-140S Telephone is ready to make and receive Voip Calls! 3. to complete the settings, from your PC open your Web Browser (ie. Internet Explorer), insert the IP address x:9999 (in the example ) and press GO. pag.8 4. Leave blank the Username and Password fields and click on OK. Look out!! The confidentiality of this data is necessary in order to guarantee that the equipment configuration is accessible only by you. We suggest to proceed with the configuration password change and to write it down by using the Basic Settings menu (Login Web Configuration). 6. After few seconds it will appear the D-link DPH-140S Voip Phone page where you can modify the configuration parameters of your D-LINK DPH-140S, as indicate in the following chapter. LOOK OUT!: The changes are going to be effective only after the saving ( Update ) and restart ( Reboot ) of your IP Phone, as indicated in this manual.
9 WEB BROWSER CONFIGURATION pag.9 Before proceeding with the configuration of your D-LINK DPH-140S using a Web Browser, it is important that you have at your disposal the username and password for the VoIP service that you obtained during registration in Skypho. Access the Management menu, create the User Name and Password for accessing the Voip telephone management. If you don t want to change the default data, leave blank the User Name and Password fields. Insert the value in the NTP Server IP field, select your Time Zone and put TFTP Server and FTP Client in Enable status. LAN Parameters 1. Verify that the DHCP option on the Network Settings page of the IP Address has been selected. Insert in the DNS Server field. Then click on Submit Look out! If in your LAN, the IP addresses are used in a static way, it is necessary to choose STATIC IP and insert the IP Address, Subnet Mask, Default Router, DNS Server 1 and 2 values in order to avoid conflicts on the network.
10 pag.10 VoIP Parameters 2. Insert your SIP account values that you received from Skypho during registration. NOTE: The SIP account is the subscription registered on the Skypho s server that allows to the user to access the VoIP services provided by the server itself. It is composed by a User name, coincident with the telephone number you have been assigned and a Password (confidential access code) by which you can access the telephone services of Skypho. User name and Password will be provided directly by Skypho at the activation of the service. Display Name = Telephone Number Assigned by SKYPHO SIP User Name = Telephone Number Assigned by SKYPHO Authentication User Name = Telephone Number Assigned by SKYPHO Authentication Password = SIP Account Password assigned by SKYPHO For the other settings, follow what indicated in the picture. Then click on Submit
11 pag.11 In the SIP Settings page, insert the following data: SIP phone Port Number: 5060 Register Server Domain Name/IP Address: voip.eutelia.it Register Server Port nr.: 5060 Authentication Expire Time: 3600 Outbound Proxy Port nr.: 5060 Session Timer: 1800 Media Port: For the other settings, follow what indicated in the picture. Then click on Submit 3. From the STUN & UpnP Settings menu, select the Enable option in the STUN field and digit stun.voip.eutelia.it in the STUN Domain Name/IP Address field. Leave Disable in the UpnP field Save by clicking on Submit.
12 pag Follow what indicated in the picture to se the Voice Settings page: Configuration saving 5. Once completed all the operations press on Restart System and then on Restart.
13 pag.13 Device Access Credentials IP Address: Verify on ADSL modem Password: blank D-LINK DPH-140S IP PHONE CONFIGURATION PARAMETERS LAN PARAMETERS LAN Configuration IP Address: DHCP : DHCP on IP statico : (DHCP off) VOIP PARAMETERS VoIP Protocol: SIP Display Name = Telephone Number Assigned by SKYPHO SIP User Name = Telephone Number Assigned by SKYPHO Authentication User Name = Telephone Number Assigned by SKYPHO Authentication Password = SIP Account Password Assigned by SKYPHO VoIP SIP Local Port: 5060 SIP Server: voip.eutelia.it VoIP STUN STUN Server Address: stun.voip.eutelia.it NTP PARAMETERS NTP Configuration NTP Server: Time Zone: +1
DVG-2101SP VoIP Telephone Adapter
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2101SP VoIP Telephone Adapter Before You Begin 1. If you purchased this VoIP Telephone
More informationDPH-140S SIP Phone Quick User Guide
DPH-140S SIP Phone Quick User Guide Version 1.0 TABLE OF CONTENTS 1.0 INTRODUCTION... 1 2.0 PACKAGE CONTENT... 1 3.0 LIST OF FIGURES... 2 4.0 SUMMARY OF KEY FUNCTIONS... 3 5.0 CONNECTING THE IP PHONE...
More informationNF1Adv VOIP Setup Guide (for Pennytel)
NF1Adv VOIP Setup Guide (for Pennytel) Configuring your NF1Adv for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network
More informationP160S SIP Phone Quick User Guide
P160S SIP Phone Quick User Guide Version 2.2 TABLE OF CONTENTS 1.0 INTRODUCTION... 1 2.0 PACKAGE CONTENT... 1 3.0 LIST OF FIGURES... 2 4.0 SUMMARY OF KEY FUNCTIONS... 3 5.0 CONNECTING THE IP PHONE... 4
More informationNF1Adv VOIP Setup Guide (for Generic VoIP Setup)
NF1Adv VOIP Setup Guide (for Generic VoIP Setup) Configuring your NF1Adv for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer
More informationConnecting the DG-102S VoIP Gateway to your network
Contents of Package: DG-102S VoIP Station Gateway Power adapter CD-ROM, including User s Manual Quick Install Guide Requirements: RS-232 Console Cable Two RJ-45 CAT-5 Straight-Through Cables For more information
More informationNetwork Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)
Network Setup Guide 1 Glossary 1.1 Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means
More informationSteltronic Focus. Main Desk Internet connection
Steltronic Focus Main Desk Steltronic S.p.A. Via Artigianale 34, 25082 Botticino Sera Brescia - Italy Tel: +39 030 2190811 fax: +39 030 2190798 Service: + 39 030 2190830 http: www.steltronic.com Service:
More informationWireless G Broadband quick install
Wireless G Broadband Router quick install guide Model 503693 INT-503693-QIG-0608-02 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS Wireless G Broadband Router, Model 503693. This quick install
More informationV101 SIP VoIP Telephone Adaptor User Manual V1.1m
V101 SIP VoIP Telephone Adaptor User Manual V1.1m Quick Guide Step 1: Broadband (ADSL/Cable Modem) Connections for V101 A. Connect V101 LAN port to ADSL NAT Router as the following connection. B. Connect
More information1. Hardware Installation
4 Port 10/100M Internet Broadband Router with USB Printer server Quick Installation Guide #4824904AXZZ0 1. Hardware Installation A. System Requirement Before you getting started, make sure that you meet
More informationNETWORK SETUP GLOSSARY
GLOSSARY NETWORK SETUP Static IP PPPoE DHCP DDNS Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service
More informationDIR-100. Before You Begin. Check Your Package Contents. Triple Play Router
This product can be set up using a current web browser. DIR-100 Triple Play Router Before You Begin Make sure you have all the necessary information and equipment on hand before beginning the installation.
More informationHow To Set Up A 9339 Voip Phone For The First Time
Interquartz 9339HS VoIP Phone Quick Start User Guide Rev 3a 1/16 9339HS VoIP Phone Quick Start Up Guide The 9339HS VoIP (Voice over Internet Protocol) Phone provides a cost-saving solution for small business/home
More informationPrestige 2302R Series
VoIP Station Gateway Quick Start Guide Version 3.60 6/2005 Overview This Quick Start Guide covers the Prestige (P2302R) and (P2302RL) models. It explains how to use your Prestige to make phone calls through
More informationNF3ADV VoIP Setup Guide (for TPG)
NF3ADV VoIP Setup Guide (for TPG) Configuring your NF3ADV for TPG VoIP The following steps will take you through the process of setting up your VoIP connection. This guide assumes that the NF3ADV already
More informationHow To Set Up A Computer With A Network Connection On A Cdrom 2.5 (For A Pc) Or Ipad (For Mac) On A Pc Or Mac Or Ipa (For Pc) On An Ipad Or Ipro (
Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. Then, the router automatically enters the self-test phase. During self-test phase, RNX-EasyN400 s Power LED will
More informationDNS-312H Network Attached Storage
This product can be set up using any current web browser, i.e., Internet Explorer 5x, and Netscape Navigator 4x or above. DNS-312H Network Attached Storage Before You Begin 1. If you purchased this storage
More informationApplication Note Configuring the UGate 3000 for use with ClipMail Pro and ClipExpress
Application Note Configuring the UGate 3000 for use with Introduction This Application Note guides the ClipMail user through the UGate gateway configuration process by using a simple dial up connection
More informationQuick Installation Guide. Overview. PLANET VIP-156/VIP-156PE/VIP-158 Quick Installation Guide
Quick Installation Guide Overview This quick installation guide describes the objectives; organization and basic installation of the PLANET VIP-156/VIP-156PE/VIP-158 VoIP Phone Adapter, and explains how
More informationDECT Gigaset N510 IP PRO
DECT Gigaset N510 IP PRO SUMMARY Summary... 1 1. System Features of the DECT Gigaset N510 IP Pro... 2 Base Station Gigaset N510 IP Pro... 2 Environmental Requirements... 3 The base should be placed in
More informationInternet Access to a DVR365
Configuration Details : Internet Access to DVR365 Page : 1 Internet Access to a DVR365 These instructions will show you how to connect your DVR365 to the internet via an ADSL broadband modem/router. The
More informationConfiguring PPP And SIP
Copyright Copyright 2005. All rights reserved. The content of this manual is subject to change without notice. The information and messages contained herein are proprietary to. No part of this manual may
More informationConfiguring the CyberData VoIP 4-Port Zone Controller with Audio Out
NetVanta Unified Communications Technical Note Configuring the CyberData VoIP 4-Port Zone Controller with Audio Out Introduction The CyberData Voice over Internet Protocol (VoIP) zone controller enables
More informationNetLINE Wireless Broadband Gateway
NetLINE Setup Guide Farallon s NetLINE connects to your cable/dsl modem, allowing computers on your local wired and wireless networks to share a single broadband connection to the Internet. This Setup
More informationCheck Your Package Contents. CD-ROM containing Manual and Warranty
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVA-G3340S Wireless VoIP Router Before You Begin If you purchased this Router to share your
More informationQuick Installation Guide Network Management Card
Rev.1.1 www.cyberpowersystems.com Quick Installation Guide Network Management Card Intelligent Network Management Card allows UPS to be managed, monitored, and configured via SNMP Card Configuration Tool
More informationSelf Help Guide IMPORTANT! Configuring Your Router With Your Modem. Please read the following carefully; This Guide refers to the following Products:
IMPORTANT! This Guide refers to the following Products: Configuring Your Router With Your Modem Please read the following carefully; Synopsis: A standard (Wireless) Router does not come equipped with the
More informationVP301 SIP. VoIP Phone. User Manual. V1.1p
VP301 SIP VoIP Phone User Manual V1.1p Quick Guide Step 1: Broadband (ADSL/Cable Modem) Connections for VP301 A. Connect VP301 RJ45 WAN port to ADSL NAT Router as the following connection. B. Connect VP301
More informationVOI-7000 VOI-7100 SIP IP Telephone
VOI-7000 VOI-7100 SIP IP Telephone User Manual 1 Ver 2.01-0609 Table of Contents 1. INTRODUCTIONS... 1 1.1. FEATURES... 1 1.2. PACKING CONTENTS... 2 1.3. LCD DISPLAY AND KEYPADS... 2 2. INSTALLATIONS &
More informationVoIP Router TA G81022MS User Guide
VoIP Router TA G81022MS User Guide V. 1.0 TABLE OF CONTENTS TABLE OF CONTENTS...2 1.0 INTRODUCTION...1 2.0 PACKAGE CONTENT...1 3.0 SUMMARY OF LED & CONNECTOR DESCRIPTION...2 3.1 THE FRONT LEDS...2 3.2
More informationVolume. Instruction Manual
Volume 1 Instruction Manual Networking EVERFOCUS ELECTRONICS CORPORATION Networking Instruction Guide 2004 Everfocus Electronics Corp 2445 Huntington Drive Phone 626.844.8888 Fax 626.844.8838 All rights
More informationQuick Guide of HiDDNS Settings (with UPnP)
Quick Guide of HiDDNS Settings (with UPnP) Solution 1: With the development of surveillance systems, more and more users want to use ADSL to realize video surveillance through network. But ADSL gives dynamic
More informationVoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VoiceGear/3CX Integration Guide Ver.0.1 Page 2 1. OVERVIEW... 3 1.1 SETTING UP 3CX PBX...4 1.2 SETTING UP VOICEGEAR GATEWAY...5 2. VOICEGEAR-3CX SIP INTEGRATION... 6 2.1 3CX CONFIGURATION...7 2.2 VOICEGEAR
More informationActiontec GT784WN Router
Table of Contents General Information...1 Verify Computer Settings...1 Router Installation...3 Configuring Your Router...3 Configuring Your Computer...7 Configuring Your Email...9 General Information Router
More informationNetwork & Internet Installation & Information Guide Fall 2004 Edition. Campus Ethernet For PCs using Windows 2000 & XP
Network & Internet Installation & Information Guide Fall 2004 Edition Campus Ethernet For PCs using Windows 2000 & XP Table of Contents Overview... 2 Requirements... 2 Physically connect your computer
More informationSavvius Insight Initial Configuration
The configuration utility on Savvius Insight lets you configure device, network, and time settings. Additionally, if you are forwarding your data from Savvius Insight to a Splunk server, You can configure
More informationLee County School Configuring Spec Ed Laptop Computers for Dialup, DSL/Cable Modem, and Wireless Access To the Internet
Lee County School Configuring Spec Ed Laptop Computers for Dialup, DSL/Cable Modem, and Wireless Access To the Internet Prepared by: Rich Morgan Technology Director Configuring your Spec Ed laptop for
More informationSTATIC IP SET UP GUIDE
STATIC IP SET UP GUIDE VERIZON D-LINK 2750B & ACTIONTEC GT784 WNV WIRELESS GATEWAY Verizon High Speed Internet for Business Verizon High Speed Internet for Business YOUR NEW STATIC IP CONNECTION AND SET
More informationGW400 VoIP Gateway. User s Guide
GW400 VoIP Gateway User s Guide P/N: 956YD30001 Copyright 2006. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. i Table of Contents
More informationBiPAC 74xx series. VoIP Quick Install Guide
BiPAC 74xx series VoIP ADSL2/2+ Modem/Routers VoIP Quick Install Guide This guide covers the initial VoIP set-up only. Please contact your VoIP service provider for their full VoIP setting. This guide
More informationStep 1: Checking Computer Network Settings:
Configuring your 3G18WV for VOIP The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network Settings: You will need to connect your computer
More informationYou may refer the Quick Installation Guide in the package box for more information.
Hardware Installation: 1. Turn off your modem. 2. Use one Ethernet cable to connect your modem to WAN port (Blue) port of BR-6228nC. 3. Use another Ethernet cable to connect your PC to one LAN Port (Yellow)
More informationSTATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM
STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM Verizon High Speed Internet for Business Verizon High Speed Internet for Business SETTING UP YOUR NEW STATIC IP CONNECTION AND IP ADDRESS(ES) This
More informationFirewall VPN Router. Quick Installation Guide M73-APO09-380
Firewall VPN Router Quick Installation Guide M73-APO09-380 Firewall VPN Router Overview The Firewall VPN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN,
More informationNETWORK SETUP GLOSSARY
GLOSSARY NETWORK SETUP Static IP Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means
More informationCONTENTS. 1. Outline of how to use.1 2. How to setup each step...1
CONTENTS 1. Outline of how to use.1 2. How to setup each step...1 2.1 Connect your IP Camera to the LAN..1 2.2 Install the following software before view video.....2 2.3 Basic configuration setting...2
More informationChapter 1 Configuring Basic Connectivity
Chapter 1 Configuring Basic Connectivity This chapter describes the settings for your Internet connection and your wireless local area network (LAN) connection. When you perform the initial configuration
More informationFLX VoIP Registering with Avaya IP Office 500
FLX VoIP Registering with Avaya IP Office 500 Date: April 5 th, 2012 This technical note gives a detailed description on how to register a Revolabs FLX conference phone with Avaya IP Office 500 PBX. On
More informationMulti-Homing Dual WAN Firewall Router
Multi-Homing Dual WAN Firewall Router Quick Installation Guide M73-APO09-400 Multi-Homing Dual WAN Firewall Router Overview The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit Ethernet
More informationChapter 3 Security and Firewall Protection
Chapter 3 Security and Firewall Protection This chapter describes how to use the basic firewall features of the ADSL2+ Modem Router to protect your network. Firewall Settings You can set up the ADSL2+
More informationNETWORK SETUP INSTRUCTIONS
NETWORK SETUP INSTRUCTIONS How to Connect AVTECH Product to Internet To connect AVTECH DVR or network camera to Internet, you need to: 1). Figure out your network environment, and have related IP information
More informationKE1020A INSTALL GUIDE
KE1020A INSTALL GUIDE Table of Contents 1 Check for Required Items...2 2 Installation Steps...2 2.1 Installation View... 2 2.2 Connection Chart to Determine Cable Types... 2 3 Ready to Use...3 3.1 Changing
More informationVoIP Network Configuration Guide
The owner friendly phone system for small business VoIP Network Configuration Guide Release 7.10 Copyright 2011 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiGuard, FortiCare, FortiManager,
More informationNETWORK SET UP GUIDE FOR
NETWORK SET UP GUIDE FOR USZ11ZS USX21ZS USX31ZAND DVRX16D DVRX32D HDDX13D SUPPORTING ROUTER D-Link Linksys NETGEAR BELKI IP Addresses on the Internet When you connect to the Internet, through dialup connection,
More informationHREP Series DVR DDNS Configuration Application Note
HREP Series DVR DDNS Configuration Application Note DDNS enables your HREP Series DVR to be remotely accessed using a Dynamic DNS server, which is commonly used if a broadband connection does not have
More informationD-Link DAP-1360 Repeater Mode Configuration
D-Link DAP-1360 Repeater Mode Configuration Outline 1. Package Contents 2. System Requirements 3. Hardware Overview Connections LED s WPS LED/Button 4. Default Settings 5. Configuring your LAN Adapter
More informationQuick Installation Guide
Quick Installation Guide PRI Gateway Version 2.4 Table of Contents Hardware Setup... 1 Accessing the WEB GUI... 2 Notification LEDs (On the Front Panel of the Gateway)... 3 Creating SIP Trunks... 4 Creating
More informationOmni 56K USB Lite Quick Start Guide
Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack
More informationNote: these functions are available if service provider supports them.
Key Feature New Feature Remote Maintenance: phone can be diagnosed and configured by remote. Zero Config: automated provisioning and software upgrading even through firewall/nat. Centralized Management:
More informationZyXEL VoIP 2602HWL - Setup guide
POWER A/C Adapter 4 3 2 1 PHONE 2 PHONE 1 LINE 2.0 Setup Network 2.1 Click on the Start button on the bottom left hand corner, and then choose Control Panel. ZyXEL VoIP 2602HWL - Setup guide Contents 1.
More informationPrestige 2002 Series. VoIP Analog Telephone Adaptor. Quick Start Guide
VoIP Analog Telephone Adaptor Quick Start Guide Version 3.60 5/2005 Overview The Prestige allows you to use an analog telephone to make phone calls over the Internet (Voice over IP or VoIP). It uses SIP
More informationChapter 2 Preparing Your Network
Chapter 2 Preparing Your Network This document describes how to prepare your network to connect to the Internet through a router and how to verify the readiness of your broadband Internet service from
More informationPLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
Trademarks Copyright PLANET Technology Corp. 2004 Contents subject to revise without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective
More informationSOYO G668 VOIP IP PHONE USER MANUAL
SOYO G668 VOIP IP PHONE USER MANUAL Inglos Networks Industrial Global Solutions Teléfono: +1 (585) 217-9864, Fax: + 1 (585) 872-9627, Email: jmesen@inglos.com Table of Content SAFETY INFORMATION... 1 INTRODUCTION...
More informationWindows 7. Basic Network Connection Setup
Windows 7 Basic Network Connection Setup For the default Windows 7 desktop layout, at the bottom of the screen and on the right hand side is the System Tray (systray). Contained here are the icons for
More information1. Panel Descriptions... 1. 2. Connecting the 4 Ports VoIP ADSL Router... 3. 3. Setting up the TCP/IP in Windows... 5
Contents 1. Panel Descriptions... 1 2. Connecting the 4 Ports VoIP ADSL Router... 3 3. Setting up the TCP/IP in Windows... 5 Windows ME/98... 5 Windows 2000... 6 Windows XP... 7 4. Setting up the 4 Ports
More informationSoftware Installation Guide
Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. To manually configure
More informationSoftware Installation Guide
Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. Flowchart The
More informationHow To Set up and Configure the WNA-100 Wireless Network Adapter
How To Set up and Configure the WNA-100 Wireless Network Adapter Section 1: Set up and Connect the Adapter to a Computer, Then Configure the Computer to Communicate With the Adapter Before the adapter
More informationChapter7 Setting the Receiving PC for Direct Upload. Setting the Receiving PC for Direct Upload... 148 For Windows... 148 For Macintosh...
Chapter7 Setting the Receiving PC for Direct Upload Setting the Receiving PC for Direct Upload... 148 For Windows... 148 For Macintosh... 153 Setting the Receiving PC for Direct Upload This section explains
More informationQuick Installation Guide DSL-2750U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2750U/NRU 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E)
More informationModel:BL-WDR3750 750Mbps Wireless Dual Band 11AC Router
Quick Installation Guide Model:BL-WDR3750 750Mbps Wireless Dual Band 11AC Router 1.Connecting the device Note: Please use wired network connections only to configure the Router. 1 Connect the WAN port
More informationUser Manual 821121-ATA-PAK
User Manual 821121-ATA-PAK IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to
More informationOptimum Business SIP Trunk Set-up Guide
Optimum Business SIP Trunk Set-up Guide For use with IP PBX only. SIPSetup 07.13 FOR USE WITH IP PBX ONLY Important: If your PBX is configured to use a PRI connection, do not use this guide. If you need
More informationDramatically simplifying voice and data networking HOW-TO GUIDE. Bundle Quick Start Guide
Dramatically simplifying voice and data networking HOW-TO GUIDE Bundle Quick Start Guide 2 edgebox How-To Guide - Table of Contents Scope of the Quick-Start Guide...3 edgebox bundles...3
More informationConfiguring a customer owned router to function as a switch with Ultra TV
Configuring a customer owned router to function as a switch with Ultra TV This method will turn the customer router into a wireless switch and allow the Ultra Gateway to perform routing functions and allow
More informationSVP307 SIP VoIP phone User Manual
SVP307 SIP VoIP phone User Manual Table of Contents 1 Check for Required Items...3 2 Installation Steps...3 2.1 Installation View...3 2.2 Connection Chart to Determine Cable Types...3 3 LCD Display...4
More informationFortiVoice. Version 7.00 VoIP Configuration Guide
FortiVoice Version 7.00 VoIP Configuration Guide FortiVoice Version 7.00 VoIP Configuration Guide Revision 2 14 October 2011 Copyright 2011 Fortinet, Inc. All rights reserved. Contents and terms are subject
More informationTHINKTEL COMMUNICATIONS TALKSWITCH VS TALKSWITCH VS THINKTEL SIP TRUNK & DID
THINKTEL COMMUNICATIONS TALKSWITCH VS TALKSWITCH VS THINKTEL SIP TRUNK & DID TA B L E O F C O N T E N T S 1.1 INTRODUCTION... 3 1.2 STARTING THE MANAGEMENT SOFTWARE... 4 1.3 IP CONFIGURATION... 5 1.4 ROUTER
More informationSelf Help Guide. Please read the following carefully; Synopsis: Requirements: A Computer with a working RJ45 LAN Port All Belkin Modem Routers
IMPORTANT! This Guide refers to the following Products: Establishing A Connection From PC To Router Please read the following carefully; Synopsis: This Self-Help Guide is designed to assist you if you
More informationUBIQUITI BRIDGE CONFIGURATION PROCEDURE (PowerStation & NanoStation Units ONLY)
UBIQUITI BRIDGE CONFIGURATION PROCEDURE (PowerStation & NanoStation Units ONLY) Hardware Installation 1. Initial placement for programming and configuration purposes should be performed in an indoor environment.
More informationLinksys Gateway SPA2100-SU Manual
Linksys Gateway SPA2100-SU Manual Manuel de l'utilisateur Table of Contents Looking for Basic Setup Instructions?... 3 Most Recent Version of this Manual... 3 Advanced Setup Instructions... 4 Wiring Your
More informationHanlong Technology Co., Ltd
Unicorn Anolog Telephone Adapter Quick Installation Guide Model:,3001,3101,3002,3112 Document Version Number:1.01 Hanlong Technology Co., Ltd Unicorn Anolog Telephone Adapter Quick Installation Guide WARNING:
More informationHow to add a SIP server How to register a handset
How to add a SIP server How to register a handset Contents Contents... 1 Hardware required equipment... 2 Software required equipment... 3 Add server... 3 Register handset to base... 7 1 of 12 Hardware
More informationSymphony Network Troubleshooting
Symphony Network Troubleshooting Step 1) Review the Networking 101 presentation on the CD included with the Symphony. A basic understanding of networks is essential to this procedure. Step 2) Identify
More informationHow to configure your Thomson SpeedTouch 780WL for ADSL2+
How to configure your Thomson SpeedTouch 780WL for ADSL2+ Connecting up your router This guide assumes that you have successfully: unpacked your router connected it up to your phone socket using the DSL
More informationApplication Notes for Configuring Yealink T-22 SIP Phones to interoperate with Avaya IP Office - Issue 1.0
Avaya Solution & Interoperability Test Lab Application Notes for Configuring Yealink T-22 SIP Phones to interoperate with Avaya IP Office - Issue 1.0 Abstract These Application Notes describe the configuration
More informationQuick Network Setup Guide
1 2 3 4 5 6 7 8 9 0/10+ 1 2 3 4 5 6 7 8 9 0/10+ HDD POWER ALARM HDD POWER ALARM! REC +/ @ MENU SEARCH MODE ALARM PREV NEXT! REC +/ @ MENU SEARCH MODE ALARM PREV NEXT Quick Network Setup Guide Connecting
More informationManual Wireless Extender Setup Instructions. Before you start, there are two things you will need. 1. Laptop computer 2. Router s security key
1 Manual Wireless Extender Setup Instructions Before you start, there are two things you will need. 1. Laptop computer 2. Router s security key Setting up LAN Static IP on PC We need to set up a Static
More informationDRO-210i LOAD BALANCING ROUTER. Review Package Contents
DRO-210i LOAD BALANCING ROUTER Review Package Contents Make sure that the package contains the following items. DRO-210i Load Balancing Router 2 Straight Ethernet Cables 1 Cross Over Ethernet Cable 1 Power
More informationSIP-6002 User Guide SIP-6002. User Guide
SIP-6002 User Guide 1 Directory 1. Welcome---------------------------------------------------------------------------------3 2. Installation-------------------------------------------------------------------------------3
More informationDWL-2000AP. Before You Begin. Check Your Package Contents
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DWL-2000AP D-Link AirPlus Xtreme G TM Wireless Access Point Before You Begin It s best to
More informationFront LEDs... 2 Rear Ports... 3 BASIC INSTALLATION... 4 Connecting Your Router... 5 Network Configuration... 6
0 P a g e Table of contents Front LEDs... 2 Rear Ports... 3 BASIC INSTALLATION... 4 Connecting Your Router... 5 Network Configuration... 6 Gateway Configuration... 11 Accessing your gateway... 11 Displaying
More informationInstallation & Operations Manual. VoIP Interface 2100-VOIPLC. 2100-VoIPLC
Installation & Operations Manual VoIP Interface 2100-VOIPLC 2100-VoIPLC Made in the USA 3 Year Warranty N56 W24720 N. Corporate Circle Sussex, WI 53089 800-451-1460 262-246-4828 (fax) www.rathmicrotech.com
More informationDSL- G604T Frequently asked Questions.
DSL- G604T Frequently asked Questions. Cannot get connection to the router.... 2 Router is not communicating with the ISP... 6 Router shows connected but cannot browse the Internet.... 6 Part of the web
More informationWEB CONFIGURATION. Configuring and monitoring your VIP-101T from web browser. PLANET VIP-101T Web Configuration Guide
WEB CONFIGURATION Configuring and monitoring your VIP-101T from web browser The VIP-101T integrates a web-based graphical user interface that can cover most configurations and machine status monitoring.
More informationStarMOBILE Network Configuration Guide. A guide to configuring your StarMOBILE system for networking
StarMOBILE Network Configuration Guide A guide to configuring your StarMOBILE system for networking INTRODUCTION... 3 BEFORE YOU BEGIN... 3 1) CONFIRM YOU HAVE THE LATEST SOFTWARE... 3 2) INSTALL THE STARMOBILE
More informationDI-634M. Check Your Package Contents. This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7.
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7. DI-634M 108G MIMO Wireless Router Before You Begin 1. If you purchased this router to share
More informationF-SECURE MESSAGING SECURITY GATEWAY
F-SECURE MESSAGING SECURITY GATEWAY DEFAULT SETUP GUIDE This guide describes how to set up and configure the F-Secure Messaging Security Gateway appliance in a basic e-mail server environment. AN EXAMPLE
More information