CARD CUTTER MACHINE STUDENT.MANUAL

Size: px
Start display at page:

Download "CARD CUTTER MACHINE STUDENT.MANUAL"

Transcription

1 CARD CUTTER MACHINE STUDENT.MANUAL Digital Fabrication Laboratory Hours 10am - 3pm (Monday-Friday) abp-fablab@unimelb.edu.au Contact A, First Floor, 757 Swanston st Faculty of Architecture Building & Planning, University of Melbourne Card Cutter Operation Manual, August

2 CARD CUTTER MACHINE STUDENT MANUAL CONTENTS Warnings...03 Safety...03 Do and Don t...04 Approved Materials...04 Overview of the Card Cutter...05 Cutting a Job...06 Troubleshooting...20 Card Cutter Operation Manual, August

3 WARNINGS + SAFETY WARNINGS The card cutter has been made available for student use. It is the student body responsibility to take care of the card cutter to ensure that student access is successful and remains available for future students. If the cutter is broken or misused access will be revoked. Please ensure the following: Only the prescribed Card Cutter materials sold at the FabLab can be cut on the Card Cutter. Cutting other materials not approved may cause damage to the machine. Do not alter any of the other settings or elements of the card cutter that are not specified in these instructions. If the Card Cutter is not working correctly do not attempt to fix it yourself, please contact a FabLab staff member. SAFETY IMPACT HAZARD. The cutting arm could cause injury if hands, hair or clothing were to get caught under or in the moving mechanism. ENSURE HANDS, HAIR AND CLOTHING DO NOT GET TOO CLOSE TO THE MOVING PARTS OR WITHIN THEIR RANGE OF MOVEMENT. When the operator is ready to commence the job ensure that everyone is away from the table and warn those nearby that a job is about to commence. The operator must ensure throughout the jobs completion that no one comes into contact with the table or places any objects on the table. THE CUTTING ARM WILL MOVE AS SOON AS THE MACHINE IS TURNED ON. Ensure all objects and materials have been removed from the cutting table and people are standing back before powering up the machine as the cutting arm will immediately start moving across the table when the power is switched on. IF AN ACCIDENT DOES OCCUR STOP THE JOB IMMEDIATELY BY PRESSING THE POWER SWITCH LOCATED ON THE LEFT SIDE OF THE MACHINE. Card Cutter Operation Manual, August

4 DO AND DON T + APPROVED MATERIALS DO AND DON T DO NOT - Move the arm of the card cutter with your hands by pushing it. If you do this it will lose its position and not cut your job correctly. DO NOT - Touch or push any of the buttons on the card cutter control panel other than the pause button. DO NOT - Touch or alter the knife or the pen tool. DO - Tape down sheets of the card to be cut by the card cutter. DO - Press pause immediately if the cut job starts malfunctioning in any way. DO - Seek immediate assistance if the card cutter malfunctions in anyway. APPROVED MATERIALS Only the following materials, purchased from the FabLab, can be cut on the card cutter: Ivory Card Black Card 200GSM Black Card 300GSM Card Cutter Operation Manual, August

5 OVERVIEW OF THE CARD CUTTER NOTES : Do not touch or alter the knife tool. Do not turn the red knob on the end of the knife tool. OVERVIEW OF THE CARD CUTTER The card cutter is capable of: 1. Cutting vector lines to create shapes with planar and curved edges using a cutting knife; 2. Scoring vector lines into the surface of materials to create fold lines using a cutting knife; There are two tool holders. Tool 2 is located on the right holder. Tool 2: Knife Tool 1: Unused Card Cutter Operation Manual, August

6 CUTTING A JOB CUTTING A JOB NOTES : Before turning on the card cutter ensure there are no objects or debris on the cutting surface. 1. Turn on the Card Cutter The cutting arm will move when the power switch is turned on. Before turning on the card cutter ensure that there are no objects or debris on the cutting surface. The power switch is located on the bottom left side of the card cutter. Power Switch 2. Placing Material Place the selected piece of card on the card cutter aligning the bottom left corner of the card with the 0,0 coordinates. Tape the sheet down using masking tape around all four sides. This will help prevent the sheet from being moved by the blade as it cuts through the material. Make sure the tape does not cover the rails where the cutting arm moves. NOTES : The locations to tape are indicated on the card cutter machine. Origin Rails Card Cutter Operation Manual, August

7 CUTTING A JOB 3. Print Setup Select Print from the Rhino menu to bring up the Print Setup window. Input the following settings: Destination Printer Paper Size Orientation Output Output Colour Graphtec FC4500/4510 Free Size Landscape Vector Output Print Colour View and Output Scale View Top Scale 1:1 Next: Click the Properties button. 4. Card Cutter Properties Input the following settings: Paper Size: 900 x 600 mm Orientation: Landscape Units: mm Next: Click the Options tab. Card Cutter Operation Manual, August

8 CUTTING A JOB 5. Card Cutter Properties Next: Click the Tools Assignment button. 6. Tools Assignment In the Tool Assignment window select and delete the green, blue, light blue, yellow and grey colours from the colour list (all except magenta, black and red). These are extra colours that are not used in your drawing and can therefore be removed. NOTES : Cut and score settings are applied following the different line colours. It is vital that the line colours are the exact RGB values for the settings to work. Card Cutter Operation Manual, August

9 CUTTING A JOB 7. Modifying Tool Settings (Magenta) Highlight the magenta colour and click Modify. In the Tool Setting window select the Disable Output tickbox and click OK. This will prevent the magenta materials dimension box from being cut by the card cutter. 8. Modifying Tool Settings (Red) Highlight the red colour and click modify. This is the colour that will be setup as the score settings. Input the following settings: Width 0.3 Condition 5 Speed 20 Force 15 Quality 1 NOTES : The settings may change. Please see the poster above the card cutter for the most up to date settings. Card Cutter Operation Manual, August

10 CUTTING A JOB 9. Modifying Tool Settings (Black) Highlight the Black colour and click Modify. This will be the colour that will be set up as the cut settings. Input the following settings: Width 0.3 Condition 6 Speed 20 Force 35 Quality Checking Tool Settings When all the settings have been in-putted accurately the Tool Assignment Window should look the same as that displayed below. The order the colours will be cut in is determined by the descending order in the window. Therefore it is important to make sure the colours are in the correct order. Red -> Black. The Magenta colour can be ignored as it has been disabled. Next: Click OK to close the Tool Assignment window. Click OK to close the Properties window. Card Cutter Operation Manual, August

11 CUTTING A JOB 11. Setting the print window Push the Set button in the Print Setup window to position the area to be printed. In the Rhino Top View interface use the Move command and snap the bottom left corner of the print area window to the bottom left corner of your materials, marked in magenta. Both should line up perfectly as they are both set to be 900 x 600 mm. If they are different please go back through the settings. Next: Press Enter when done. 12. Print When all the setup procedures described above have been completed push the print button. The card cutter will start automatically when the print button is pressed. Make sure that nothing is resting on the table or could come into contact with the cutting arm as it moves across the table to cut out the job. Card Cutter Operation Manual, August

12 TROUBLE-SHOOTING TROUBLESHOOTING If an error occurs during the operation of the job immediately push the pause button on the card cutter control panel. To resend the job turn the card cutter off and on again and reprint the job from Rhino. Errors may include: The knife catching and tearing part of the job. The job cutting incorrectly due to file setup. The job can be restarted by pushing the pause button again. NOTES : If there are any issues, contact FabLab staff. Do not try to fix any problems yourself. Card Cutter Operation Manual, August

Laser cutter setup instructions:

Laser cutter setup instructions: Laser cutter setup instructions: 1. Cut your material to 18 x 24 or smaller. 2. Turn on the laser cutter by flipping the wall switch on the right behind Station B. You will hear the cooling fan and air

More information

Otis Photo Lab Inkjet Printing Demo

Otis Photo Lab Inkjet Printing Demo Otis Photo Lab Inkjet Printing Demo Otis Photography Lab Adam Ferriss Lab Manager aferriss@otis.edu 310.665.6971 Soft Proofing and Pre press Before you begin printing, it is a good idea to set the proof

More information

Create a Poster Using Publisher

Create a Poster Using Publisher Contents 1. Introduction 1. Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background 12. Add text to your poster 14. Add pictures to your poster 17. Add graphs

More information

Appointments: Calendar Window

Appointments: Calendar Window Appointments Appointments: Calendar Window Purpose The Appointment Calendar window is the automated equivalent of a paper appointment book. You can make appointments, confirm appointments, and view appointments

More information

CNC Transfer. Operating Manual

CNC Transfer. Operating Manual Rank Brothers Ltd CNC Transfer Operating Manual Manufactured by: Rank Brothers Ltd 56 High Street, Bottisham, Cambridge CB25 9DA, England Tel: +44 (0)1223 811369 Fax: +44 (0)1223 811441 Website: http://www.rankbrothers.co.uk/

More information

User Guide. Printing, Copying and Scanning

User Guide. Printing, Copying and Scanning User Guide Printing, Copying and Scanning A few important things to know ( for successful printing, copying and scanning) 1. You will need sufficient credit on your printing account to release your printing.

More information

Using Ad-Hoc Reporting

Using Ad-Hoc Reporting Using Ad-Hoc Reporting The purpose of this guide is to explain how the Ad-hoc reporting function can be used to produce Management Information from client and product data held in the Key. The guide will

More information

WPI Laser Cutter User Guide

WPI Laser Cutter User Guide WPI Laser Cutter User Guide The laser cutter is capable of cutting and engraving two-dimensional drawings in various materials including wood and plastic. The laser cutter owned by the WPI Department of

More information

EPSON SCANNING TIPS AND TROUBLESHOOTING GUIDE Epson Perfection 3170 Scanner

EPSON SCANNING TIPS AND TROUBLESHOOTING GUIDE Epson Perfection 3170 Scanner EPSON SCANNING TIPS AND TROUBLESHOOTING GUIDE Epson Perfection 3170 Scanner SELECT A SUITABLE RESOLUTION The best scanning resolution depends on the purpose of the scan. When you specify a high resolution,

More information

Replacing a toner cartridge. Removing a toner cartridge. Printing. Using color. Paper handling. Maintenance. Troubleshooting. Administration.

Replacing a toner cartridge. Removing a toner cartridge. Printing. Using color. Paper handling. Maintenance. Troubleshooting. Administration. Your printer monitors the toner level of your toner cartridges. When the toner is getting low, the printer displays 88 Toner Low. This message indicates it is time for you to replace one or more

More information

Microsoft PowerPoint 2010 Computer Jeopardy Tutorial

Microsoft PowerPoint 2010 Computer Jeopardy Tutorial Microsoft PowerPoint 2010 Computer Jeopardy Tutorial 1. Open up Microsoft PowerPoint 2010. 2. Before you begin, save your file to your H drive. Click File > Save As. Under the header that says Organize

More information

Printing Solutions for Word 2013. Printing Solutions for Word 2010. Printing Solutions for Word 2007. Printing Solutions for Word 2003

Printing Solutions for Word 2013. Printing Solutions for Word 2010. Printing Solutions for Word 2007. Printing Solutions for Word 2003 Printing Solutions for Word 2013 Printing Solutions for Word 2010 Printing Solutions for Word 2007 Printing Solutions for Word 2003 Printing solutions for Printers Word 2013 sure you have selected the

More information

So you say you want something printed...

So you say you want something printed... So you say you want something printed... Well, that s great! You ve come to the right place. Whether you re having us design and edit your work, or you fancy yourself a designer and plan to hand over your

More information

A series Metric (cm) Imperial (inch)

A series Metric (cm) Imperial (inch) Poster Creation PowerPoint for Posters PowerPoint is well known as a presentation support application. However, it can also be used to create academic posters as it is a format that many people are already

More information

SIGN Surgical Database Training Manual

SIGN Surgical Database Training Manual Manual In addition to using the Online Surgical Database for single case entry, you can also use the Offline Data Entry Tool (ODET) to enter each case offline and then upload a batch of cases to the online

More information

SETTING UP YOUR 6000 SERIES TIME RECORDER

SETTING UP YOUR 6000 SERIES TIME RECORDER INTRODUCTION The Pyramid 6000 Series Time Recorder is an electronic time recorder designed to make payroll processing easier and more efficient. The 6000 series will meet your business needs whether your

More information

WebEx Virtual Office Hours

WebEx Virtual Office Hours WebEx Virtual Office Hours During your virtual office hours, you can display, discuss, and review content and concepts with your students. You can also make a student presenter and view, discuss and comment

More information

Creating a Poster in Powerpoint

Creating a Poster in Powerpoint Creating a Poster in Powerpoint January 2013 Contents 1. Starting Powerpoint 2. Setting Size and Orientation 3. Display a Grid 5. Apply a background 7. Add text to your poster 9. Add WordArt to your poster

More information

Addendum Advanced POS Printer Drivers

Addendum Advanced POS Printer Drivers Addendum Advanced POS Printer Drivers Overview With the introduction of version 4.0, The General Store now supports the use of advanced, manufacturer s printer drivers for certain point of sale printers.

More information

Win 7 - STIMA CLS / CMP Driver Installation Quick Guide

Win 7 - STIMA CLS / CMP Driver Installation Quick Guide Win 7 - STIMA CLS / CMP Driver Installation Quick Guide This guide is intended to demonstrate a quick installation and setup of ticket alignment under Windows 7 for the Stima CLS and CMP printers using

More information

Plain-paper digital Fax/Copier/Printer/Scanner Scanner and Fax Guide

Plain-paper digital Fax/Copier/Printer/Scanner Scanner and Fax Guide Plain-paper digital Fax/Copier/Printer/Scanner Scanner and Fax Guide Please read this guide before operating this machine. After you finish reading this guide, keep it handy for easy reference. Chapter

More information

UniFLOW Print and Copy Instructions for Students

UniFLOW Print and Copy Instructions for Students UniFLOW Print and Copy Instructions for Students Getting Started, Setting up your PIN Page 2 Purchasing Credits for printing and Photocopying Page 4 How to use the MFD Page 8 Photocopying Page 10 Printing

More information

Communicate: In Print

Communicate: In Print Communicate: In Print A simple guide Work areas Communicate: In Print has two different modes in which to edit your documents: Create and Adjust modes. These are easily interchangeable and the toolbars

More information

Star t Here. Epson Stylus Photo RX620. Unpack and Assemble. 1 Make sure you have all the parts shown here. If any parts are missing,

Star t Here. Epson Stylus Photo RX620. Unpack and Assemble. 1 Make sure you have all the parts shown here. If any parts are missing, Star t Here Epson Stylus Photo RX0 Unpack and Assemble Make sure you have all the parts shown here. If any parts are missing, contact Epson as described on the back of this sheet. Epson Stylus Photo RX0

More information

User Manual Printer driver PRO 300 / ECO 200 / Express Plus / Pegasus State: April 2003 3073.01.991.90.08

User Manual Printer driver PRO 300 / ECO 200 / Express Plus / Pegasus State: April 2003 3073.01.991.90.08 User Manual Printer driver PRO 300 / ECO 200 / Express Plus / Pegasus State: April 2003 3073.01.991.90.08 Installation instructions driver PRO300 / ECO200 / Express / Plus / Pegasus 3 Contents 1. Introduction

More information

SPSS Workbook 1 Data Entry : Questionnaire Data

SPSS Workbook 1 Data Entry : Questionnaire Data TEESSIDE UNIVERSITY SCHOOL OF HEALTH & SOCIAL CARE SPSS Workbook 1 Data Entry : Questionnaire Data Prepared by: Sylvia Storey s.storey@tees.ac.uk SPSS data entry 1 This workbook is designed to introduce

More information

WINDOWS 7/8 instruction guide for your Printrbot printer and computer software

WINDOWS 7/8 instruction guide for your Printrbot printer and computer software Software To start printing with your Printrbot Simple 3d printer, you need to download 3 pieces of software and two digital models (STL files). 1. The teensy Serial Driver. This connects the printer to

More information

Laser Cutter User Manual

Laser Cutter User Manual Laser Cutter User Manual frequently asked questions... the laser is cutting weird! it s cutting a thick line or not cutting through at all! Table Of Contents Section 1: Materials Guide 1.1 Can I Cut this?

More information

Using the Laser Cutter and AutoCAD Template

Using the Laser Cutter and AutoCAD Template 1 Using the Laser Cutter and AutoCAD Template This tutorial outlines the best way to cut and etch using the laser cutter. Your project is important to you, and you want to finish it efficiently. Using

More information

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and

More information

Calibrating your monitor

Calibrating your monitor Tutorial Calibrating your monitor Software version: Asanti 2.0 Document version: June 23, 2015 This tutorial demonstrates how to calibrate your monitor with ColorTune Display for color accuracy. 1. Install

More information

Xerox WorkCentre 6655 Color Multifunction Printer Control Panel

Xerox WorkCentre 6655 Color Multifunction Printer Control Panel Control Panel Available services can vary on your printer setup. For details about services and settings, see the User Guide. 3 4 5 Touch screen Menus 6 6 Alphanumeric keypad 7 Job controls 7 Services

More information

First Time On-Campus Remote Desktop Connection ipad Edition

First Time On-Campus Remote Desktop Connection ipad Edition First Time On-Campus Remote Desktop Connection ipad Edition General: This guide is a step-by-step guide for configuring and using an ipad to remotely connect to a work computer from on campus. This guide

More information

Designing a Poster using MS-PowerPoint

Designing a Poster using MS-PowerPoint Designing a Poster using MS-PowerPoint TABLE OF CONTENTS Introduction... 3 Main components of a poster... 3 Setting up your poster... 5 Setting up the document size... 5 Configuring the grid and guides...

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Network Fax Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Network Fax Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Network Fax Guide 2009 KYOCERA MITA Corporation All rights reserved Preface Thank you for purchasing Multifunctional Digital Color Systems. This manual explains the instructions

More information

HP Scanjet G4000 series. User Guide

HP Scanjet G4000 series. User Guide HP Scanjet G4000 series User Guide Contents 1 How to use the scanner...2 Where to get additional information...2 Accessibility...2 How to use the HP Photosmart software...3 Front panel and accessories

More information

Layout Tutorial. Getting Started

Layout Tutorial. Getting Started Getting Started Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating

More information

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems

More information

Bb Collaborate Online Rooms Faculty Support Guide

Bb Collaborate Online Rooms Faculty Support Guide Bb Collaborate Online Rooms Faculty Support Guide D2L Services West Chester University of Pennsylvania www.wcupa.edu/d2l 610-436-3350, option 2 Anderson Hall, room 20 d2l@wcupa.edu v10.3 June 2014 Contents

More information

SMART Ink 1.5. Windows operating systems. Scan the following QR code to view the SMART Ink Help on your smart phone or other mobile device.

SMART Ink 1.5. Windows operating systems. Scan the following QR code to view the SMART Ink Help on your smart phone or other mobile device. SMART Ink 1.5 Windows operating systems User s guide Scan the following QR code to view the SMART Ink Help on your smart phone or other mobile device. Trademark notice SMART Ink, SMART Notebook, SMART

More information

Tips for optimizing your publications for commercial printing

Tips for optimizing your publications for commercial printing Tips for optimizing your publications for commercial printing If you need to print a publication in higher quantities or with better quality than you can get on your desktop printer, you will want to take

More information

Guide To Creating Academic Posters Using Microsoft PowerPoint 2010

Guide To Creating Academic Posters Using Microsoft PowerPoint 2010 Guide To Creating Academic Posters Using Microsoft PowerPoint 2010 INFORMATION SERVICES Version 3.0 July 2011 Table of Contents Section 1 - Introduction... 1 Section 2 - Initial Preparation... 2 2.1 Overall

More information

A Guide To Using. Box-Office 2000. Version 2. By Nortech Software. The main booking screen

A Guide To Using. Box-Office 2000. Version 2. By Nortech Software. The main booking screen A Guide To Using Box-Office 2000 Version 2 By Nortech Software The main booking screen Contents Features 4 Event Bookings...4 Ticket Book Printing & Layouts...4 Installation 5 Requirements...5 Software

More information

Complete. PCB Design Using. NI Multisim, NI Ultiboard, LPKF CircuitCAM and BoardMaster. pg. 1. Wei Siang Pee

Complete. PCB Design Using. NI Multisim, NI Ultiboard, LPKF CircuitCAM and BoardMaster. pg. 1. Wei Siang Pee Complete Wei Siang Pee PCB Design Using NI Multisim, NI Ultiboard, LPKF CircuitCAM and BoardMaster pg. 1 Introduction Multisim equips educators, students, and professionals with the tools to analyze circuit

More information

EXCEL 2010: PAGE LAYOUT

EXCEL 2010: PAGE LAYOUT EXCEL 2010: PAGE LAYOUT PAGE SET UP Options to change the page layout of a spreadsheet are available from the PAGE LAYOUT tab. Most of these options are available from the PAGE SETUP group on this tab.

More information

Blackbaud StudentInformationSystem. Reports Guide for Admissions Office

Blackbaud StudentInformationSystem. Reports Guide for Admissions Office Blackbaud StudentInformationSystem Reports Guide for Admissions Office 102811 2011 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means,

More information

Instructions for setting up a Datamax E-4205A Class Mark III

Instructions for setting up a Datamax E-4205A Class Mark III Instructions for setting up a Datamax E-4205A Class Mark III Load the ticket stock 1. Hold down both buttons on either side of the printer then lift the top off. 2. Ticket stock is loaded in through the

More information

TheFinancialEdge. Reports Guide for Accounts Receivable

TheFinancialEdge. Reports Guide for Accounts Receivable TheFinancialEdge Reports Guide for Accounts Receivable 041813 2013 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or

More information

HP LaserJet P2050 Series Printer Print tasks

HP LaserJet P2050 Series Printer Print tasks Cancel a print job Stop the current print job from the control panel Press the Cancel button on the control panel. OK Stop the current print job from the software program When you send the print job, a

More information

Faxing. Fax Overview

Faxing. Fax Overview Fax Overview Faxing is an optional printer feature providing several methods for faxing an original document. Embedded Fax: Document is scanned and sent directly to a fax machine. Server Fax: Document

More information

Merging Labels, Letters, and Envelopes Word 2013

Merging Labels, Letters, and Envelopes Word 2013 Merging Labels, Letters, and Envelopes Word 2013 Merging... 1 Types of Merges... 1 The Merging Process... 2 Labels - A Page of the Same... 2 Labels - A Blank Page... 3 Creating Custom Labels... 3 Merged

More information

Printing to the Poster Printer

Printing to the Poster Printer Printing to the Poster Printer Document size The HP Design Jet Z3100ps uses a roll of paper that is 36 wide, however it does not print all the way to the edge of the paper (known as a bleed ). One dimension

More information

11 Printing Designs. When you have completed this chapter, you will be able to:

11 Printing Designs. When you have completed this chapter, you will be able to: 11 Printing Designs Creating printed documents is the end we have worked towards from the beginning of this course. We have already been introduced to it very briefly with Printing - A First Look on page

More information

Table of Contents. www.scholastic.com/bookfairs/easyscan

Table of Contents. www.scholastic.com/bookfairs/easyscan Quick Start Guide Table of Contents Equipment Setup and Break-Down 1-2 Processing a Sale 3 Payment Types 3 Tax Change 3 Scanning Items 4 Price Checks 4 Voids 4 Returns 4 Reprints 4 Gift Certificates 5

More information

P3000 Printer Guide. 566372-001 Rev A. January 2006

P3000 Printer Guide. 566372-001 Rev A. January 2006 P3000 Printer Guide 566372-001 Rev A January 2006 Information resources for the P3000 ID Card Printer Installation Message Help To install one printer to a PC using a USB cable, see the Installation Map,

More information

Layout Tutorial. Chapter 10: Getting Started

Layout Tutorial. Chapter 10: Getting Started Chapter 10: Layout Tutorial In this tutorial we will create a layout template, send a few views to a layout page, then save this document in PDF format. In this tutorial you will learn about: Creating

More information

Danish Keyboard Label Instructions and Specifications

Danish Keyboard Label Instructions and Specifications Visit our web site at: SmartKeyboardSolutions.com Smart Keyboard Solutions 1855 E Southern Avenue, Suite #213 Mesa, AZ 85204 Phone: 877-477-1988 Buy this product online Danish Keyboard Label Instructions

More information

Zebra GC420t User Guide VIF-NA-BG-125, V3.0

Zebra GC420t User Guide VIF-NA-BG-125, V3.0 VIF - Maintenance of computer systems infrastructure Zebra GC420t User Guide VIF-NA-BG-125, V3.0 IZUM, 2016 COBISS, COMARC, COBIB, COLIB, IZUM are registered trademarks owned by IZUM. CONTENTS 1 Introduction...

More information

Forest Stewardship Council

Forest Stewardship Council PART IV: GRAPHIC RULES 10 FSC LABELS FSC FSC Mix FSC Recycled From responsible sources Made from recycled material Color and font 10.1 Positive green is the standard preferred color. Negative green and

More information

Note. One - point Advice. To begin. Basic working method and markings. Fold along these lines. The printed surface should be

Note. One - point Advice. To begin. Basic working method and markings. Fold along these lines. The printed surface should be Note To begin Basic working method and markings Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin

More information

Helpful icons on the Zurich Platform

Helpful icons on the Zurich Platform Branding User Guide Branding This guide will help you when you are using the Zurich Intermediary Platform. Please note that more detailed instructions regarding branding are included in the Firm Administrator

More information

Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint

Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint Instructions for Creating a Poster for Arts and Humanities Research Day Using PowerPoint While it is, of course, possible to create a Research Day poster using a graphics editing programme such as Adobe

More information

Checking the Package Contents. Installing the Printer Software. Connecting. Unpacking the. the Printer. Printer. Attaching

Checking the Package Contents. Installing the Printer Software. Connecting. Unpacking the. the Printer. Printer. Attaching Installing the Printer Software Checking the Package Contents Connecting the Printer Unpacking the Printer Installing the Ink Cartridges Plugging in the Printer Attaching the Printer Parts 4032216-00 EUL

More information

LOCAL FLEET TRACKING. GPS Fleet Tracking Help Guide

LOCAL FLEET TRACKING. GPS Fleet Tracking Help Guide LOCAL FLEET TRACKING GPS Fleet Tracking Help Guide Table of Contents HOW TO SET UP THE CONTROL PANEL... 3 HOW TO SET UP A BOOKMARK... 5 HOW TO SET UP A GEOFENCE... 7 HOW TO DISPLAY VEHICLE HISTORY... 9

More information

In this lab you will explore the Windows XP Firewall and configure some advanced settings.

In this lab you will explore the Windows XP Firewall and configure some advanced settings. 16.3.2 Lab: Configure Windows XP Firewall Print and complete this lab. In this lab you will explore the Windows XP Firewall and configure some advanced settings. Recommended Equipment Two computers directly

More information

Instructions for the HP DesignJet 800ps printer Printing from PowerPoint

Instructions for the HP DesignJet 800ps printer Printing from PowerPoint Use of Psychology Poster Printer Facilities Poster printer facilities are located in Room N7/2A of the Stewart Building. We have a 2 PC s, each connected to a poster printer, as well as a paper cutter

More information

MULTIFUNCTIONAL DIGITAL SYSTEMS. Troubleshooting Guide

MULTIFUNCTIONAL DIGITAL SYSTEMS. Troubleshooting Guide MULTIFUNCTIONAL DIGITAL SYSTEMS Troubleshooting Guide 0-03 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission

More information

Non-Java Kronos link: https://www-kronos.itcs.northwestern.edu/wfc/applications/wtk/html/ess/logon.jsp

Non-Java Kronos link: https://www-kronos.itcs.northwestern.edu/wfc/applications/wtk/html/ess/logon.jsp Kronos 6.3 Troubleshooting Guide Links to Kronos 6.3... 1 Chrome 29, 30 or 31... 2 Tips for Troubleshooting Internet Explorer 8 or 9... 3 Tips for Troubleshooting Internet Explorer 9 or 10... 3 Compatibility

More information

Xerox Nuvera Production System and Xerox igen Digital Production Press

Xerox Nuvera Production System and Xerox igen Digital Production Press January 2015 702P01084 Xerox Nuvera Production System and Xerox igen Digital Production Press Xerox Nuvera 100/120/144/157 EA Production System Xerox Nuvera 100/120/144 MX Production System Xerox Nuvera

More information

SpaceClaim Introduction Training Session. A SpaceClaim Support Document

SpaceClaim Introduction Training Session. A SpaceClaim Support Document SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:

More information

Sage Accountants Business Cloud EasyEditor Quick Start Guide

Sage Accountants Business Cloud EasyEditor Quick Start Guide Sage Accountants Business Cloud EasyEditor Quick Start Guide VERSION 1.0 September 2013 Contents Introduction 3 Overview of the interface 4 Working with elements 6 Adding and moving elements 7 Resizing

More information

Instructions Manual AmazonBasics 12-Sheet Cross-Cut Paper / CD / Credit Card Shredder with Basket ASIN# B005QAQFFS. Customer Service 1-866-216-1072

Instructions Manual AmazonBasics 12-Sheet Cross-Cut Paper / CD / Credit Card Shredder with Basket ASIN# B005QAQFFS. Customer Service 1-866-216-1072 Instructions Manual AmazonBasics 12-Sheet Cross-Cut Paper / CD / Credit Card Shredder with Basket ASIN# B005QAQFFS Customer Service 1-866-216-1072 Paper Shredder Instructions Manual Sheet Capacity 12 Sheets

More information

Xerox WorkCentre 7800 Series Control Panel

Xerox WorkCentre 7800 Series Control Panel Control Panel Available services can vary on your printer setup. For details about services and settings, see the User Guide. ABC DEF Menus GHI PQRS 7 JKL TUV 8 MNO 6 WXYZ 9 7 Job controls 0 # C Touch

More information

How to Add Users 1. 2.

How to Add Users 1. 2. Administrator Guide Contents How to Add Users... 2 How to Delete a User... 9 How to Create Sub-groups... 12 How to Edit the Email Sent Out to New Users... 14 How to Edit and Add a Logo to Your Group's

More information

Creating tables in Microsoft Access 2007

Creating tables in Microsoft Access 2007 Platform: Windows PC Ref no: USER 164 Date: 25 th October 2007 Version: 1 Authors: D.R.Sheward, C.L.Napier Creating tables in Microsoft Access 2007 The aim of this guide is to provide information on using

More information

Managing your Joomla! 3 Content Management System (CMS) Website Websites For Small Business

Managing your Joomla! 3 Content Management System (CMS) Website Websites For Small Business 2015 Managing your Joomla! 3 Content Management System (CMS) Website Websites For Small Business This manual will take you through all the areas that you are likely to use in order to maintain, update

More information

Creating Forms With Adobe LiveCycle Designer 8.2

Creating Forms With Adobe LiveCycle Designer 8.2 Creating Forms With Adobe LiveCycle Designer 8.2 Instructional Media Center HCC Version 2 Modified Date 1/20/10 Learning Objectives: At the end of this training session the student will be able to use

More information

03_Events Trainingv3 1

03_Events Trainingv3 1 03_Events Trainingv3 1 Publish Event You can publish some information about your content before you have set up all the details. In this way, people can learn about the event on your website prior to registrations

More information

S PT-E550W ELECTRONIC E C LABELING L SYSTEM

S PT-E550W ELECTRONIC E C LABELING L SYSTEM ELECTRONIC E C LABELING L SYSTEM S PT-E0W In order to use your P-touch labeling system safely, read the included Quick Setup Guide first. Read this guide before you start using your P-touch labeling system.

More information

Document Number: 13004.25-4.5.2-6/15/2012

Document Number: 13004.25-4.5.2-6/15/2012 Mobile Android App User Guide Copyright 2012 icontrol Networks, Inc. All rights reserved. No reproduction in whole or in part without prior written approval. icontrol Networks, icontrol, and icontrol logo

More information

Peninsula Thermal Printer Driver For OSX. Installation & Operating Manual

Peninsula Thermal Printer Driver For OSX. Installation & Operating Manual Installation & Operating Manual This product and documentation is copyright and design right Peninsula 1989-2007. This edition 2007.01 Peninsula Group Low Hall Hunmanby North Yorkshire YO14 0PS www.peninsula-group.com

More information

Aeries Student Information System Attendance Notes October 3, 2008

Aeries Student Information System Attendance Notes October 3, 2008 Aeries Student Information System Attendance Notes October 3, 2008 The Attendance Notes will give schools the ability to store Attendance Notes within Aeries from the Period and Daily Attendance form.

More information

10.3.1.10 Lab - Configure a Windows XP Firewall

10.3.1.10 Lab - Configure a Windows XP Firewall 5.0 10.3.1.10 Lab - Configure a Windows XP Firewall Print and complete this lab. In this lab, you will explore the Windows XP Firewall and configure some advanced settings. Recommended Equipment Step 1

More information

CNC MILLING. University for Applied Arts, Vienna Studio Prof. Lynn Compiled by Nathalie Rinne With special thanks to David Erdman

CNC MILLING. University for Applied Arts, Vienna Studio Prof. Lynn Compiled by Nathalie Rinne With special thanks to David Erdman CNC MILLING GL Form Manufacturing Lab, photo: Stefan Hörner University for Applied Arts, Vienna Studio Prof. Lynn Compiled by Nathalie Rinne With special thanks to David Erdman Rules & Safety guidlines:

More information

SP55 Printer Guide 554733-001. August 2004

SP55 Printer Guide 554733-001. August 2004 SP55 Printer Guide 554733-001 August 2004 Information resources for the SP55 Printer Installation Message Help To install the printer: To install one printer on a PC using a USB cable, see the Installation

More information

Wall Mount Installation and Use

Wall Mount Installation and Use Wall Mount Installation and Use 1. Introduction The Wall Mount works the same way for all Touchfire cases - the one or two row magnet strip on the back of the case is magnetically attracted to the Wall

More information

Aura Kitchen Monitor. 2012 Coherent Software Solutions

Aura Kitchen Monitor. 2012 Coherent Software Solutions Part Introduction I 1 Introduction Introduction Kitchen Items is an alternative method for alerting kitchen staff about new orders waiting to be prepared. When compared to the standard method of passing

More information

CRIME SCENE EVALUATION LAB

CRIME SCENE EVALUATION LAB FORENSIC SCIENCE INTRODUCTION ACTIVITY #12 NAME DATE HR CRIME SCENE EVALUATION LAB Objective You will draw rough and final sketches of a crime scene. Introduction Once the photographer has completed his

More information

OPERATION MANUAL. MV-410RGB Layout Editor. Version 2.1- higher

OPERATION MANUAL. MV-410RGB Layout Editor. Version 2.1- higher OPERATION MANUAL MV-410RGB Layout Editor Version 2.1- higher Table of Contents 1. Setup... 1 1-1. Overview... 1 1-2. System Requirements... 1 1-3. Operation Flow... 1 1-4. Installing MV-410RGB Layout

More information

OSM 2007 MONITORING SOFTWARE

OSM 2007 MONITORING SOFTWARE OSM 2007 MONITORING SOFTWARE Contents Preparation...3 Software Installation...4 Configuring OSM...6 Connecting a Device...16 Connecting to Station Monitoring Software...19 Troubleshooting...23 Installing

More information

Appointment reminders (template based, sent automatically)

Appointment reminders (template based, sent automatically) MEDTECH SMS WEBINAR SMS messaging is an increasingly popular service for improving patient communication and practice efficiency. Appointment reminders (template based, sent automatically) If a practice

More information

Copyright 2008 OLYMPUS CORPORATION All Rights Reserved. Paper Craft Assembly Manual

Copyright 2008 OLYMPUS CORPORATION All Rights Reserved. Paper Craft Assembly Manual Paper Craft Assembly Manual Before assembly: 1/9 Tips on assembly: Print all the parts (Photo-quality paper is recommended for ink-jet printers and paper of medium thickness (0.20 mm) for laser printers.)

More information

Table of Contents. www.scholastic.com/bookfairs/easyscan

Table of Contents. www.scholastic.com/bookfairs/easyscan Quick Start Guide Table of Contents Equipment Setup and Break-Down 1-2 Processing a Sale 3 Payment Types 3 Tax Change 3 Scanning Items 4 Price Checks 4 Voids 4 Returns 4 Reprints 4 Gift Certificates 5

More information

Customer Release Notes for Xerox Integrated Fiery Color Server for the Xerox Color C75 Press, version 1.0

Customer Release Notes for Xerox Integrated Fiery Color Server for the Xerox Color C75 Press, version 1.0 Customer Release Notes for Xerox Integrated Fiery Color Server for the Xerox Color C75 Press, version 1.0 This document contains important information about this release. Be sure to provide this information

More information

Lesson 5: The Trading Station

Lesson 5: The Trading Station Lesson 5: The Trading Station Objective To understand the basic functions of the Trading Station and become proficient with market order entry, the stop loss and limit functions, closing trades manually,

More information

How to Mimic the PanelMate Readout Template with Vijeo Designer

How to Mimic the PanelMate Readout Template with Vijeo Designer Data Bulletin 8000DB0709 04/2010 Raleigh, NC, USA How to Mimic the PanelMate Readout Template with Vijeo Designer Retain for future use. Overview The purpose of this data bulletin is to provide step-by-step

More information

Correcting the Lateral Response Artifact in Radiochromic Film Images from Flatbed Scanners

Correcting the Lateral Response Artifact in Radiochromic Film Images from Flatbed Scanners Correcting the Lateral Response Artifact in Radiochromic Film Images from Flatbed Scanners Background The lateral response artifact (LRA) in radiochromic film images from flatbed scanners was first pointed

More information

CorelDRAW X5 & CorelDRAW X6

CorelDRAW X5 & CorelDRAW X6 CorelDRAW X5 & CorelDRAW X6 CorelDRAW X5 & CorelDRAW X6 work best with Windows 7 but can be used with Windows Vista & Windows XP. Step One: Make sure that you have installed all Service Releases and software

More information

C790 Series. Maintenance Guide

C790 Series. Maintenance Guide C790 Series Maintenance Guide April 2011 www.lexmark.com Contents...3 Cleaning the exterior of the printer...3 Cleaning the printhead lenses...3 Storing supplies...4 Checking the status of supplies...5

More information

MB-Accumulator Operator's Manual

MB-Accumulator Operator's Manual Mathias Bäuerle GmbH Gewerbehallestraße 7-11 D-78112 St.Georgen Telefon (07724) 882-0 Telefax (07724) 882-111 Internet: http://www.mbfold.de E-mail: center@mbfold.de MB-Accumulator Operator's Manual CONTENTS

More information