cost-effective automation
|
|
- Alaina McCormick
- 8 years ago
- Views:
Transcription
1 cost-effective automation compact units for drilling tapping milling AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP)
2 AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists of a vane motor powe red by comp ressed air, a pneumatic cy l i n d e r, and a closed hy d raulic system. The total s t ro ke length can be va ri a b ly subdivided into rapid advance and wo r k i n g feed across the whole ra n ge. The thro t t l e / ch e ck va l ve in the hy d ra u l i c system permits exact setting of the feed rate and high speed re t u r n. E X T R E M E LY COMPACT DESIGN BU I LT-IN HYDRAULICS FOR CONTROLLED WORKING FEED ADJUSTMENT OF DRILLING DEPTH WITH POSITIVE S TOP GUARANTEES A HIGH DEGREE OF AC C U R AC Y L OW NOISE LEVEL MINIMAL AIR CONSUMPTION Guidelines for choice of unit [Ø, mm] DRILLING UNIT CAPACITY IN STEEL CAPACITY IN ALUMINIUM/BRASS CA PACITY IN WO O D / P L A S T I C S No of Spindles BE(F) BE(F) BE(F) BE(F) BE(F) BE(F) BE(F) BE Performance specifications at 6.3 Bar Th rust (max.) 600 N M i n. Center to Center Spacing Co n t rolled feed rate >0.01 m/min Powe r kw Single Spindle Working pre s s u re ra n ge 6 7 Bar S t ro ke (max.) Double-Spindle Head 11 mm Air consumption <0.3 Nm 3 / m i n BE 100% controlled 30 mm Run-out at spindle nose (max.) 0.03 mm Sound level 70 db(a) BEF total 60 mm Depth accura cy +/ mm of wh i ch is contro l l e d Rapid advance ra t e 10 m/min DRILLING UNIT SPEED [IDLE] [RPM] SPEED [AT MAX OUTPUT] [R P M] BE (F) 5 BE (F) 8 BE (F) 11 BE (F) BE (F) 36 BE (F) 49 BE (F) 150 BE TORQUE (AT MAX OUTPUT) [NM]
3 Dimensions [mm] Limit switch package can be mounted on either side. You can download D CAD-drawings and 3D CAD-models on DRILLING UNIT A B C D E WEIGHT [KG] BE 5 BEF 5 BE 8 BEF 8 BE 11 BEF 11 BE BEF BE 36 BEF 36 BE 49 BEF 49 BE 150/ BEF 150 Necessary components CHUCKS Accessories MULTI-SPINDLE HEADS 50 Key chucks Ø mm (Standard Adjustable heads VH04-,VH06MBK 6V-series chuck) 4 46 Ø mm Collet Chucks Ø mm Ø mm Ø mm COLLETS ER11 Ø mm ER0 Ø mm ER3 Ø mm CONTROLS Controls for BE -units MOUNTINGS LIMIT SWITCHES Mountings for the BE(FP) On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering please state: Model, Chuck (collet size), Limit Switches and if it is to be used in Lubrication-free operation. 17
4 AIR HYDRAULIC PRECISION DRILLING UNIT BE(F)P The basic design of the BE(F)P consists of a vane motor powe red by c o m p ressed air, a pneumatic cy l i n d e r, and a closed hy d raulic system.th e BE(F)P has a precision chu ck for an ex t ra high level of pre c i s i o n. Thanks to pre c i s i o n, s e p a rate and double ball bearings run-out amounts to a maximum of 0.01 mm.the total stro ke length can be va ri a b ly subdivided into rapid advance and working feed across the whole ra n ge.the thro t t l e / ch e ck va l ve in the hy d raulic system permits exact setting of the feed rate and high speed re t u r n. PRECISION DESIGN WITH A MAX RUN-OUT AT SPINDLE NOSE OF 0.01 MM E X T R E M E LY COMPACT DESIGN BU I LT-IN HYDRAULICS FOR CONTROLLED WORKING FEED ADJUSTMENT OF DRILLING DEPTH WITH POSITIVE S TOP GUARANTEES A HIGH DEGREE OF AC C U R AC Y L OW NOISE LEVEL MINIMAL AIR CONSUMPTION Guidelines for choice of unit DRILLING UNIT CAPACITY IN STEEL CAPACITY IN ALUMINIUM/BRASS CA PACITY IN WO O D / P L A S T I C S [Ø, mm] BE(F)P BE(F)P 36 BE(F)P 49 BEFP 150 BEP Performance specifications at 6.3 Bar Th rust (max.) 600 N M i n. CC Spindle Spacing Air consumption <0.3 Nm 3 / m i n Powe r kw Run-out at spindle nose (max.) 0.01 mm Sound level 70 db(a) S t ro ke (max.) Depth accura cy +/ mm BEP 100% controlled 30 mm Rapid advance rate 10 m/min BEFP total 60 mm Co n t rolled feed rate >0.01 m/min of wh i ch is contro l l e d Working pre s s u re ra n ge 6 7 Bar DRILLING UNIT SPEED (IDLE) [RPM] SPEED (AT MAX OUTPUT) [R P M] BEP BEFP BEP 36 BEFP 36 BEP 49 BEFP 49 BEFP 150 BEP TORQUE (AT MAX OUTPUT) [NM]
5 Dimensions [mm] limit switch package can be mounted on either side. You can download D CAD-drawings and 3D CAD-models on DRILLING UNIT BEP BEFP BEP 36 BEFP 36 BEP 49 BEFP 49 BEFP 150 BEP 0 A B C Precision chucks Ø mm Ø mm (Standard CONTROLS F WEIGHT chuck) Precision Collet Chuck ER 11 Ø mm Controls for BE units ER 11 Ø mm LIMIT SWITCHES MOUNTINGS Mountings for the BE(FP) COLLETS [KG] Ø mm COLLETS E Accessories Necessary components CHUCKS D On you can find more information as well as the same information as above in imperial units. When requesting a quote or ordering please state: Model, Chuck (collet size), Limit Switches and if to be used in Lubrication-free operation. 19
6 You will find units for Drilling, Tapping and Milling installed wherever increased rates of production are required.they are a cost-effective means of automating drilling, tapping and milling operations. E products are known world wide for their quality, durability, precision and power. Each series of E units are the most compact in the market today. E customers benefit from the high quality of the E product line with less down-time and reduced operating costs. The compact design of the E units together with a good availability of CAD-drawings/-models makes the design of a machine more straight forward. E s concern for the worker and his environment is evident in all E products. Low noise levels and non-lubrication features eliminating oil mist in the air is a common feature of the E product line. E self-feeding units utilizes a built-in hydraulic feed control system. They combine precision with power enabling a high level of precision also in multispindle head applications. The extremely compact Air hydraulic drilling units and Lead screw tappers are ideal for drilling/tapping smaller holes. E s electropneumatic and hydraulic units can to be used when more power is required. You will still have the E durability and precision. The E product line also includes non-feed pneumatic units perfect for drilling as well as milling, slitting and grinding. Complementing the line of units, E also offers a full line of accessories for machining applications. E also have supplementary product lines of Rotary actuators Air thrusters /Hydraulic components and systems E Systems AB, Strömslundsgatan 3, SE Borås, Sweden Tel: , Fax:
NAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationSHAKER CONVEYORS. www.aluflex.com
CLEAN ELECTRICAL ENGINEERING INSTALL AND FORGET With a transporter from AluFlex you will get the most revolutionary and state-of-the-art among transporters. The AluFlex transporter is the cleanest and
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationV-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision
Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled
More informationCincom Innovation Line
Evolution and Innovation is the Future Sliding Headstock Type Automatic CNC Lathe Cincom Innovation Line Automatic 12mm lathe offering 2 machines in 1 Handles both Swiss-type and bar chucker applications
More informationIBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
More informationSAMSUNG Machine Tools
SAMSUNG Machine Tools LCV 55 / 65 / 8 VERTICAL MACHINING CENTERS SMEC Co., Ltd. 6671, Gasulri, Daesanmyeon, Changwonsi Gyeongsangnamdo, Korea 641921 Tel +82 55 25 4832(48) Fax +82 55 25 491(492) http://www.esmec.com
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationBasic Parameters for Concrete Drilling and Sawing equipment
I V B S Internationaler Verband der Betonbohr- und Sägeunternehmungen I A C D S International Association of Concrete Drillers and Sawers A I E F S B Association Internationale des Entreprises de Forage
More informationThe Boxford range of 3-axis CNC Machining Centres are
The Boxford range of 3-axis CNC Machining Centres are requirements. Featuring a high-end machine controller, utilising the latest motion control technology, they can satisfy all your 2½ and 3D milling
More informationCORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationHIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER
HIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER 14001 認 可 登 錄 14001 認 可 登 錄 1 Introducing all new H630B high speed horizontal machining center. Incorporates state of the art Dual Drive technology
More informationScrewdriver Function Module for the automatic Screw-Assembly
Screwdriving technology Automation Air motors Air tools Machine Building Components Screwdriver Function Module for the automatic Screw-Assembly wide product variety for all applications maximum ease of
More information8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles
8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,
More informationP33 Series Modular Drills Redefining Productivity Through Innovation
Redefining Productivity Through Innovation High Performance Ergonomics P33 Series Non-ube Modular Drills Ingersoll-Rand is yet again redefining productivity through innovation. This time we ve married
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationDUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design
More informationMINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationLIDKÖPING High Volume SGP 320 External Grinder / SSB 320 Internal Grinder
LIDKÖPING High Volume SGP 320 External Grinder / SSB 320 Internal Grinder TM Fast, precise and profitable About us KMT Precision Grinding develops, markets, manufactures, and installs high precision grinding
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationDrilling fleet. Capabilities. Agriculture. Water. Environment.
Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function
More informationTurning Centres. MAX 5 From print to part to profit
Turning Centres MAX 5 From print to part to profit TMi and TMXi General purpose, heavy duty and high performance 2 axis lathes > TM6i > TM12i > TM8i > TM18i > TM10i > TM18Li > TMX8i > TMX10i Benefits of
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationSAMSUNG Machine Tools
SAMSUNG Machine Tools VERTICAL MACHINING CENTER SMEC Co., Ltd. 666, Gasul-ri, Daesan-myeon, Changwon-si Gyeongsangnam-do, Korea 641-921 Tel +82 55 250 4800 Fax +82 55 253 5355 http://www.esmec.com www.esmec.com
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationBED TYPE MILLING CENTRE
TR BED TYPE MILLING CENTRE TR BED TYPE MILLING CENTRE BED TYPE MILLING CENTRE HIGH PERFORMANCE IN A COMPACT MACHINE PROVIDING ACCURATE COMPLEX MILLING TR BED TYPE MILLING CENTRE The TR milling centre is
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationHYDRO-FIX hydraulic clamping system. For boring bars and driven tools
HYDRO-FIX hydraulic clamping system For boring bars and driven tools Improve your productivity HYDRO-FIX hydraulic clamping system has successfully been used for over 15 years. HYDRO-FIX is excellent for
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationPure Efficiency. C.C.I.A.A.: N REA. 0195268 Cod. Fiscale e P. IVA: 00483230173 Capitale Sociale versato 100.000,00
Pure Efficiency. The need to significantly reduce the production costs to remain competitive on the global market and the requirement to control and lessen the environmental impact of all activities are
More informationSC-32 CNC LATHE OPERATION MANUAL
SC-32 OPERATION MANUAL NCT Ipari Elektronikai Kft. 1 / 29 Dátum: 2013.09.27. CONTENTS 1. ACCURACY RECORD... 2 2. SAFETY PRECAUTIONS... 2 2.1. Safety Rules... 2 2.2. Warning label attaching positions...
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationAir damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationMechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationStarChip 400. StarChip 400. More productive, more cost-effective - the Inclined Bed Lathe StarChip. CNC Inclined Bed Lathe. www.knuth.
CNC Inclined Bed Lathe More productive, more cost-effective - the Inclined Bed Lathe StarChip Center width 550 mm Turning diameter over bed (max) 360 mm Speed range 50-6000 min -1 8-station tool turret
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More information[ means: Easy handling for large parts. EMCO MAXXTURN 95 / 110. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMy] means: Easy handling for large parts. EMCO MAXXTURN 9 / 11 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 11 [Control unit] - Ergonomic, pivotable and slidable
More informationECO 80 PRODUCT DESCRIPTION FEATURES. Power output S1 100% Adjustable air nozzle. Liquid cooling. Minimalmengenschmierung MMS retrofit
A PRODUCT DESCRIPTION Power output S6 40% Power output S1 100% Rotation speed Diameter Spindlehousing Spindle interface 3.0 kw 2.5 kw to 40.000 rpm 80 mm Stainless steel HSK - E25 FEATURES Adjustable air
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationMULTITURRET BAR TURNING B446-465 T2 B446-465 T3
MULTITURRET AR TURNING 446-465 T2 446-465 T3 Double-spindle and double-turret turning centres featuring two Y-axes: from bar to the finished part 446-465 T2 years after the launch of the first QUATTRO
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationANDANTEX USA INC. 2 Speed Spindle Gearboxes MSD RAM-MSD
NDNTEX US INC. 2 Speed Spindle Gearboxes SD R-SD CHINE TOOL Spindle Drive Gearboxes SD & R-SD Overview - Principle IPROVING THE PRODUCTI- VITY WHILE KEEPING THE HIGHEST PRECISION REDEX-NDNTEX s two speed
More informationSiemens AG 2009. Spindle solutions. Spindle motors and motor spindles for every requirement. Brochure October 2009. Motors. Answers for industry.
Spindle solutions Spindle motors and motor spindles for every requirement Brochure October 2009 Motors Answers for industry. The right spindle solution for any task The function, performance and accuracy
More informationSPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION. WEISS Spindeltechnologie GmbH A Siemens Company
SPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION WEISS Spindeltechnologie GmbH A Siemens Company GSS GLOBAL SPINDLE SOLUTIONS MILLING SPINDLES MILLING FOR EVERY APPLICATION MORE THAN 1,000 DRIVE
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More information225-230T-05-S2. Rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators
Actuators Technical data sheet 225-230T-05-S2 Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor 5
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationMultifactor TM. Efficient, reliable, flexible!
Multifactor TM Efficient, reliable, flexible! 2 Multifactor Technology and know-how for the ideal solution Looking for a high-performance, low-cost production system? Are your work piece size requirements
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationSpecifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)
Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationFlexible High Tech Solutions for Industry
Vertical machining centre f milling and turning Flexible High Tech Solutions f Industry Those who look a little harder discover a lot me Machine Tools EN Customized Efficiency Machine Tools MAXIMA 12 K16/3
More informationStatic and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
More informationEC303 0608701017 50 1/4" quickchange 0608800630 EC303 0608701017 740. 3GE27 0608720053 50 3/8" square with 0608800631 EC303 0608701017 1.
2 Bosch Rexroth AG Electric Drives and Controls Documentation Output drives Measurement transducer Gearboxes EC motor Advantages: For tight drill holes Standard tool mounts Flange connection for easy assembly
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationCNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
More informationLeading-edge technology for machine tools
Leading-edge technology for machine tools We combine five specialists in one Improving productivity and successfully distinguishing themselves from the competition are key objectives for machine tool
More informationOIL-FREE ROTARY SCROLL COMPRESSOR. ECOLIFE 1,5 15 kw
OILFREE ROTARY SCROLL COMPRESSOR ECOLIFE 1, 1 kw EN Why The continuous innovation of the compressed air tools and machineries, the evolution of specific productive processes and uses, require exclusively
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationProductivity in perfection. HYPERTURN 65. ] means:
[ E[M]CONOMy ] means: Productivity in perfection. HYPERTURN 65 High-performance turn/mill center with up to 3 tool turrets for even greater flexibility and productivity. HYPERTURN 65 DUOTURN [Main spindle]
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationElectron S.R.L. B55 CNC TRAINING MACHINES
Electron S.R.L. Design Production & Trading of Educational Equipment B55 CNC TRAINING MACHINES Specifications may change without notice Page 1 of 12 File B55 MODULAR TRAINING SYSTEM FOR THE STUDY OF CNC
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationHIGH SPEED SPINDLE MOTORS
DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability
More information