Putting the pieces together!

Transcription

1 FULL-TIME PART-TIME GED ESOL GENERAL INFORMATION Putting the pieces together! COURSE CATALOG

2 VISION STATEMENT Focus on being the best hands-on training /educational organization within our service area. OUR MISSION: Penta Career Center is a highperforming school that provides: u Options and opportunities u Real-world learning u Partnership with business and industry u Productive citizens OUR COMMITMENT: The staff at Penta is committed to: u Achieving Excellence u Delivering results u Responding to our communities u Creating an environment for success ADULT EDUCATION MISSION STATEMENT The Mission Statement of Adult and Continuing Education provides to its students life-long learning directed toward their economic growth and personal enrichment in a rapidly changing world. Table of Contents FULL-TIME PROGRAMS 4-9 Automotive Body Repair Auto Mechanic Technician Builder, Contractor & Remodeler Technologies Heating, Air Conditioning & Refrigeration Mechanic & Repair Machinist/ Machine Technologist Welder/ Welder Technologist STAFF Ronald W. Matter Superintendent Rhonda Hogrefe Adult Education Supervisor Cindy Covington Financial Aid Counselor Debra Morris ABLE Program Coordinator Bonnie Williams Adult Education Secretary Linda Romstadt Adult Education Secretary Penta Career Center hereby gives notice that it does not discriminate on the basis of race, color, national origin, ancestry, sex, religion, disability/ handicap, citizenship status, or veteran status in its educational programs, activities, employment policies, or admission policies and practices, as required by law, Penta has a section 504, Title VI and Title IX Coordinator. PART-TIME PROGRAMS Marine Skills Mechanic Low Pressure Boiler Systems Forklift Training Plumbing Licensure Preparation/Plumbing Code EPA Test for Heating, Ventilation, Air Conditioning/Refrigeration OSHA 10-Hour General Industry Training OSHA 10-Hour Construction Industry Training OSHA 10-Hour General Industry Training for Agriculture BUILDER, CONTRACTOR & REMODELER TECHNOLOGY SERIES: Masonry Carpentry I Carpentry II Roofing Windows, Doors & Siding Plumbing Heating & Insulation Electricity Dry Wall & Counter Tops Trim Carpentry Wall & Floor Covering Decks

3 MACHINE TRADES: CNC Programmer Training Lathe Operations I Lathe Operations II Lathe Operations III Lathe Operations IV Vertical Mill Operations I Vertical Mill Operations II Vertical Mill Operations III Vertical Mill Operations IV Precision Measurement WELDING PROGRAMS: Welding I Introduction to Welding Process Welding II Applied Welding Blueprint Reading Welding III GMAW Welding IV SMAW Welding V GTAW Welding VI Pipe Welding Welding VII Certification Class Pipe & Plate Certifications ON DEMAND PROGRAMS 18 SERVSAFE Certification Program SERVSAFE Food Handler Program Basic Life Support for Healthcare Providers CPR for Family & Friends Heartsaver AED CPR Heartsaver CPR MEDICAL PROGRAMS Clinical Medical Assistant Program.. 18 Dental Assisting Program Pharmacy Technician State Certified Nurse s Aide (STNA) 20 How to Register for STNA ONLINE E-LEARNING HEALTHCARE COURSES Medical Coding ICD EKG Technician Electronic Health Record Management Program Medical Administrative Assistant Dialysis Technician Medical Terminology ECG / EKG Course for Nurses ed2go ONLINE COURSES 23 ADULT BASIC EDUCATION 24 GED Prep ABLE (Adult Basic Literacy Education) 24 Steps to Success Classes GENERAL INFORMATION Contact Information Telephone & Fax Numbers Accreditation Certification Test, Supplies & Tools 25 Class Cancellations Admission Policy Admission Requirements Dismissal Certificates / Passports School Closing Student Receipts Financial Aid Supplies & Tools General Equivalency Diploma (GED) 26 Liability & Campus Security Program Cancellations Program Transfers Grievance Procedures Withdrawals & Refunds Verification of Attendance Letter Workkeys Assessment/ Pre-Entrance Exam Workkeys Career Readiness Certificate Calendar Penta Career Center was established in 1965 and was the first multicounty vocational school in Ohio. Penta serves the training needs of adults in the entire region through its Adult & Continuing Education Center which offers full-time and part-time programs. In November 2003, Penta passed a one-mill permanent improvement levy to construct, equip and maintain a new facility. The new state-of-the-art facility contains 125 classrooms and labs which were opened to students on September 2, 2008.

4 FULL-TIME u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required Automotive Body Repair Date: August 25, 2014 June 10, 2015 Time: 5:30 p.m. 9:30 p.m. Hours: 604 Cost: $4,832 Train for entry level positions in the auto body repair profession and jump start your career as an auto body and collision repair technician. Some of the areas covered include welding for auto body, panel repair, and exterior and interior trim repair. You will prepare to take the ASE Refrigeration and Painting/ Refinishing Certification Test offered in the spring. You will also acquire CPR/First Aid and basic computer fundamentals. All students will receive a Basic Auto Body Repair tool kit, which will become your personal property upon the successful completion of the course. According to the Bureau of Labor Statistics: PAY: In May 2012, the median annual wage for automotive body and related repairers was $38,380. The median annual wage for automotive glass installers and repairers was $32,650. JOB OUTLOOK: Employment of automotive body and glass repairers is projected to grow 13% from 2012 to 2022, about as fast as the average for all occupations. Job opportunities should be very good for jobseekers with industry certification and formal training in automotive body repair and refinishing and in collision repair. 4

5 Auto Mechanic Technician Date: August 25, 2014 June 10, 2015 Time: 5:00 p.m. 10:00 p.m. Hours: 760 Cost: $6,080 FULL-TIME Do you like working on cars but need a greater knowledge of automotive mechanical principles to turn your interest into a career? This extensive career development course in auto mechanics will provide you with the knowledge for entry into the automotive mechanic/technician profession. Within the time frame of this course, you will prepare for and take the ASE Brakes and HVAC Certification Tests. You will also acquire CPR/ First aid and basic computer fundamentals. All students will receive a Basic Auto Technology Repair tool kit, which will become your personal property upon the successful completion of the course. According to the Bureau of Labor Statistics: PAY: The median annual wage for automotive service technicians and mechanics was $36,610 in May JOB OUTLOOK: Employment of automotive service technicians and mechanics is projected to grow 9% from 2012 to 2022, about as fast as the average for all occupations. Job opportunities for qualified jobseekers should be very good. u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required 5

6 6 FULL-TIME u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required Builder, Contractor & Remodeler Technologies Date: August 25, 2014 June 10, 2015 Time: Hours: 892 Cost: $7,136 4:00 p.m. 10:00 p.m. The economy has turned around and construction of homes and businesses is booming. In this extensive full-time course, you will obtain the knowledge required for entry level positions in the building profession. Some of the areas covered include masonry, rough and finish carpentry, windows, doors, siding, plumbing, heating and insulation, drywall and countertops, trim, blue print reading, floor covering, electrical and decking. Additionally, you will train for and earn your Skid Steer Loader Certification, CPR/First Aid certification and computer fundamentals. All students will receive a Basic Builder, Contractor and Remodeler tool belt, which will become your personal property upon the successful completion of the course. *As part of this course, you may be required to meet at construction locations for hands-on construction field experience. The construction sights are typically within a 20 mile radius of Penta Career Center. According to the Bureau of Labor Statistics: PAY: The median annual wage for construction laborers and helpers was $29,160 in May JOB OUTLOOK: Employment of construction laborers and helpers is projected to grow 25% from 2012 to 2022, much faster than the average for all occupations. Laborers and helpers work in all fields of construction, and demand for these workers will mirror the level of overall construction activity.

7 Heating, Air Conditioning and Refrigeration Mechanic & Repair Date: August 25, 2014 June 10, 2015 Time: Hours: 765 Cost: $6,120 5:00 p.m. 10:00 p.m. Jobs for HVAC mechanics is heating up. In this extensive career development course you will obtain the knowledge for entry level positions in the HVAC profession. Some of the areas covered include sheet metal, gas & electric furnaces, high efficiency gas boilers, geothermal applications and more. Additionally you will prepare and take the EPA Core Type 1, 2, 3 Refrigerant Certification Exam and the ASE Refrigeration/Refrigerant Recovery and Recycling Exam, and learn CPR/First Aid and basic computer fundamentals. All students will receive Basic HVAC Technician equipment, which includes basic hand tools and a multimeter which will become your personal property upon the successful completion of the course. This program is Toledo Heating and Air Conditioning Contractors Association (THACCA) approved. After the full training is complete, 576 hours may be credited towards an apprenticeship program. According to the Bureau of Labor Statistics: PAY: The median annual wage for heating, air conditioning, and refrigeration mechanics and installers was $43,640 in May JOB OUTLOOK: Employment of heating, air conditioning, and refrigeration mechanics and installers is projected to grow 21% from 2012 to 2022, faster than the average for all occupations. Candidates familiar with computers and electronics and those with good troubleshooting skills will have the best job opportunities as employers continue to have difficulty finding qualified technicians to work on complex new systems. FULL-TIME u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required 7

8 8 FULL-TIME u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required Machinist/ Machine Technologist Date: August 25, 2014 June 10, 2015 Time: Hours: 600 Cost: $4,800 5:30 p.m. 9:30 p.m. Have a mechanical aptitude and want a career with job security? Skilled new machinist are needed and here is your chance to get solid based hands-on training to become a machinist and CNC technician. In this extensive career development course you will obtain the knowledge for entry level positions in the machine trades profession. Areas of study include the following: measurement, materials and safety, mathematics, drill press and surface grinding, job planning, bench work and layout, blueprint reading, sketching, lathe operations, vertical mill, CNC, and job seeking skills. You will also receive Heartsaver AED CPR and basic computer fundamentals. All students will receive Basic equipment, which will become your personal property upon the successful completion of the course. Students must have at least 2 years of proven machining experience or education. According to the Bureau of Labor Statistics: PAY: In May 2012, the median hourly wage for machinists was $ The median hourly wage for tool and die makers was $ JOB OUTLOOK: Employment of machinists and tool and die makers is projected to grow 7% from 2012 to Workers with computer skills who can perform multiple tasks in a machine shop will have the best job opportunities.

9 Welder/ Welder Technologist Date: August 25, 2014 June 10, 2015 Time: 5:00 p.m. 10:00 p.m. Hours: 765 Cost: $6,120 If you like working with metal, you might want to consider a career in Fabrication and Welding Technology. Welders work with their hands to make or repair a variety of products used in industry as well as everyday life. If it is made of metal, in most instances, it was built by a welder/ fabricator. Our competency-based Welding and Fabrication program will give you the training you need using safe and correct procedures required in thermo-cutting, SMAW, GTAW, GMAW, and applications of pipe welding. You will learn to weld and fabricate using various metals: brass, copper, and cast iron. Successful completion of this course will prepare you for entry into many trade and industry opportunities, including construction, aerospace, automotive, heavy equipment, machinist, ship building and agriculture, to name just a few. All students will receive a Basic Welding tool kit which includes: helmet, goggles, jacket and gloves for use during the course. The Basic Welding kit will be yours to keep upon successful completion of the course. You will also be given a maximum of 10 practice coupons and 4 test coupons throughout the course. All successful students will receive a 3G-4G Combination Certification. To complete and receive the 6G Pipe Welding Certification, all students must have 85% attendance and satisfactory academic standing. According to the Bureau of Labor Statistics: PAY: The median annual wage for welders, cutters, solderers, and brazers was $36,300 in May JOB OUTLOOK: Employment of welders, cutters, solderers, and brazers is projected to grow 6% from 2012 to Skilled welders with up-to-date training should have good job opportunities. FULL-TIME u PELL Funding is available to students who qualify u WorkKeys Pre-Entrance Assessment required 9

10 PART-TIME PROGRAMS 10 LAUNCH YOUR CAREER! Marine Skills Mechanic Date: Nov. 3, 2014 March 12, 2015 Time: 5:30 p.m. 9:30 p.m. Hours: 256 Cost: $2,800 Do you love the water? Here is your chance to launch a career as a Marine Skills Mechanic. This program is designed to help you master competencies necessary to work in the Marine trades industry in less than six months. A Marine Maintenance Mechanic performs preventative maintenance, troubleshoots and repairs mechanical, electrical and instrumentation of motor systems. This training will also cover techniques of boat handling, safety, skills for water transportation, skills for marine engine repair. This class is held in Oak Harbor, using state of the art equipment. *Presented by WSOS CAC Inc. in partnership with Penta Career Center and Ottawa County Improvement Corporation. For all inquiries or to register, contact George Dupey at or Penta Adult Education at Low Pressure Boiler Systems Fall: Sept. 22 Oct. 27, 2014 Mondays & Wednesdays Spring: Feb. 23 March 30, 2015 Mondays & Wednesdays Time: 5:30 p.m. 9:30 p.m. Cost: $519 (does not include book) Hours: 52 Open to Apprentices The Low Pressure Boiler Operator course covers low-pressure steam, hydronic system components, and boiler operations. Forklift Training New classes starting each month. To register call Time: 9:00 a.m. 1:00 p.m. Cost: $ (if paid before day of class) $ (if paid day of class) On the Penta Campus In accordance with OSHA Reg (1), this class is designed to give the student the competencies needed to be a qualified forklift operator. After successfully completing this 1/2 day program, the student receives an Operator s Permit. This permit is good for three (3) years. The following topics will be covered: Handling of Hazardous Materials Recognition of Workplace Hazards Recognition of OSHA Requirement Want us to come to you? Call for details at

11 PART-TIME PROGRAMS Plumbing Licensure Preparation/Plumbing Code City of Toledo/State of Ohio Fall: Sept. 23 Nov. 20, 2014 Tuesdays & Thursdays Spring: Feb. 17 April 16, 2015 Tuesdays & Thursdays Time: Hours: 72 Cost: 5:30 p.m. 9:30 p.m. $719 (does not include book) Open to Apprentices This class will prepare you for the Ohio Construction Industry Licensing Boards license for Plumbing contractors. Topics covered include: Administration Definitions General Regulations Fixtures, Faucets & Fixture Fittings Water Heaters Vents Water Supply & Distribution Sanitary Drainage Indirect/Special Waste Traps, Interceptors & Separators Storm Drainage Special Piping & Storage Systems Referenced Standards EPA Test for Heating, Ventilation, Air Conditioning/Refrigeration Offered Spring 2014: 1 Day (Test Only) Call to schedule a date and time Cost: $149 EPA Refrigerant Transition and Recovery Certification Test Only. Penta Career Center is an authorized provider of the EPA Refrigerant Transition and Recovery Certification Test under the direction of the Pennsylvania College of Technology, Penn State University. OSHA 10-Hour General Industry Class Offered On Demand You must attend 10 sessions to receive your card. Cost: $149 (book & materials included) Topics will include Intro to: OSHA Walking & Working Surfaces Means of Egress, Fire Protection Electrical Safety Lockout/Tagout Ergonomics Chemical Hazard Communication Industrial Hygiene Bloodborne Pathogens Flammable & Combustible Liquids Materials Handling & Storage Safety & Health Programs Personal Protective Equipment Machinery Machine Guarding Interested in taking an online OSHA class? We offer the following classes at just $30 per person. Call for more information on: OSHA 10-Hour General Industry Training OSHA 10-Hour Construction Industry Training OSHA 10-Hour General Industry Training for Agriculture GET CERTIFIED! Penta Career Center Adult & Continuing Education

12 PART-TIME PROGRAMS FULL-TIME PROGRAMS ALSO OFFERED u Hand tools are not provided. Personal tools and tool belt are recommended and proper safety attire for construction. u Some programs may be offered at a project site off campus. BUILDER, CONTRACTOR & REMODELER TECHNOLOGY SERIES: Masonry Date: Aug. 25 Sept. 11, 2014 Monday Thursday (no class on 9/1) Time: Cost: $439 Hours: 44 6:00 p.m. 10:00 p.m. Learn the proper method to set up the various brick and block course, masonry structures, and fireplaces. Carpentry I Date: Sept. 15 Oct. 9, 2014 Monday Thursday Time: 6:00 p.m. 10:00 pm Cost: $639 Hours: 64 Learn floor and wall framing and basic residential construction techniques. Handson projects are used to apply what you learn. Carpentry II Date: Oct.13 Nov. 6, 2014 Monday Thursday Time: 6:00 p.m. 10:00 p.m. Cost: $639 Hours: 64 You will expand on the skills learned from Carpentry Shop I and be introduced to more complex carpentry projects. Roofing Date: Nov , 2014 Monday Thursday Time: 6:00 p.m. 10:00 p.m. Cost: $439 Hours: 44 You will be introduced to various types of roofing materials such as plywood, asphalt, wood shingles and flashing materials. Windows, Doors & Siding Date: Dec. 8 Jan. 7, 2015 Monday Thursday (no class 12/22 1/1) Time: 6:00 p.m. 10:00 p.m. Cost: $439 Hours: 44 Learn to measure and install new and replacement windows, doors, and siding. Plumbing Date: January 12 26, 2015 Monday Thursday (no class 1/19) Time: 6:00 p.m. 10:00 p.m. Cost: $399 Hours: 40 Learn the various tools, materials and methods used in the plumbing industry. Included will be fitting of different materials, sweat soldering, plumber diagrams, and various types of water delivery. 12

13 PART-TIME PROGRAMS Heating & Insulation Date: Jan. 28 Feb. 2, 2015 Monday Thursday Time: Cost: $159 Hours: 16 6:00 p.m. 10:00 p.m. Learn basic operation and maintenance of residential heating. Components of the class: furnace, ductwork, flue and cold air returns. Electricity Date: February 9 25, 2015 Monday Thursday (no class on 2/16) Time: 6:00 p.m. 10:00 p.m. Cost: $399 Hours: 40 Learn the various concepts of circuits utilizing bread boards to create circuits using 120 and 240 single-phase power. The student will also use full size mock-ups for circuit wiring procedures using switches, receptacles and lighting. Low voltage electrical wiring will also be covered. Dry Wall & Counter Tops Date: March 2 26, 2015 Monday Thursday Time: 6:00 p.m. 10:00 p.m. Cost: $479 Hours: 48 Learn the basic application of dry wall along with finishing techniques, preparation, and texture. Repair of dry wall will be covered. You will also learn the construction and installation of counter tops. Trim Carpentry Date: March 30 April 23, 2015 Monday Thursday Time: 6:00 p.m. 10:00 p.m. Cost: $479 Hours: 48 You will be given instructions on finished carpentry techniques. Wall & Floor Covering Date: April 27 May 12, 2015 Monday Thursday (no class 5/5 & 7) Time: 6:00 p.m. 10:00 p.m. Cost: $319 Hours: 32 You will be introduced to projects covering various types of ceramic tiles, (layout pattern, grout, wall or floor, stain removal), vinyl floor covering, (underlayment, nail pattern, various subfloor installation), and hardwood floors (tongue & groove, subfloor over concrete, floor squeaks, repair damaged floor). Decks Date: May 18 27, 2015 Monday Thursday (no class 5/25) Time: 6:00 p.m. 10:00 p.m. Cost: $239 Hours: 24 You will work on building drawings, deck size, stairway, bench and table, types of lumber, redwood vs. treated, support system, ledger and deck pattern. BUILD A CAREER! u Hand tools are not provided. Personal tools and tool belt are recommended and proper safety attire for construction. u Some programs may be offered at a project site off campus. 13

14 PART-TIME PROGRAMS POLISH YOUR SKILLS MACHINE TRADES: (Open to Machine Trades Apprentices) CNC Programmer Training Fall: Sept. 8 Dec. 17, 2014 Monday & Wednesday Spring: Feb. 10 May 28, 2015 Tuesday & Thursday Time: Cost: $2,399 Hours: 120 5:30 p.m. 9:30 p.m. The need for broadly trained CNC Technicians and Machinists is on the rise. Retirees are expected to exceed the supply of adequately trained new machine programmers and operators. Learn how to program and use the tools needed to work in this growing industry. You must pass the pre-admissions testing standards to be eligible for this training. Student must have at least 2 years of proven machining experience or education. Check out our full-time program that includes CNC Training. Lathe Operations I Sept , 2014 Tuesday & Thursday 5:30 p.m. 9:30 p.m. $ You will learn basic operations of a manual lathe through demonstrations and hands-on experiences. Machine shop safety and an introduction to basic blue print reading will also be a part of this program. Lathe Operations II Date: Sept. 30 Oct. 9, 2014 Tuesday & Thursday Time: 5:30 p.m. 9:30 p.m. Cost: $159 Hours: 16 You will build upon the skills learned in Lathe Operations I. Lathe Operations III January 13 22, 2015 Tuesday & Thursday 5:30 p.m. 9:30 p.m. $ You will build on skills in operations of a lathe through demonstrations and hands-on experiences. Advanced machine shop safety and blue print reading will also be covered. Lathe Operations IV February 3 12, 2015 Tuesday & Thursday 5:30 pm 9:30 pm $ You will build upon the skills learned in Lathe Operations III. 14

15 PART-TIME PROGRAMS Vertical Mill Operations I October 21 30, 2014 Tuesday & Thursday Vertical Mill Operations III February 24 March 5, 2015 Tuesday & Thursday Precision Measurement Oct , 2015 Tuesday & Thursday CALL TODAY TO ENROLL! 5:30 p.m. 9:30 p.m. 5:30 p.m. 9:30 p.m. 5:30 p.m. 9:30 p.m. $159 $159 $ You will learn basic operations of a manual vertical mill, and begin to learn how to manufacture a part to a basic blue print specification. Prerequisite: Lathe I & II Vertical Mill Operations II November 11 20, 2014 Tuesday & Thursday 5:30 p.m. 9:30 p.m. $ You will build on skills learned in Vertical Mill Operation I. Prerequisite: Vertical Mill Operations I You will learn more advanced operations of a manual vertical mill. Prerequisite: Vertical Mill Operations I & II Vertical Mill Operations IV March 10 19, 2015 Tuesday & Thursday 5:30 pm 9:30 pm $ You will build on skills learned in Vertical Mill Operations I, II, III. Prerequisite: Vertical Mill Operations I,II, III Precision Measurement involves the handson training in measurement using the various instruments found in manufacturing such as the micrometer, caliper and height gauge. Techniques focus on proper handling and reading of these instruments that are used to determine measurement to specific tolerances during this course. Penta Career Center Adult & Continuing Education

16 PART-TIME PROGRAMS FULL-TIME PROGRAMS ALSO OFFERED WELDING PROGRAMS Welding I Introduction to Welding Processes Date: Sept. 15 Oct.15, 2014 Monday & Wednesday Time: 5:00 p.m. 10:00 p.m. Cost: Hours: 50 $499 (plus $99 supply fee) Learn how to torch cut with both oxy-acetylene and plasma, and to braze proficiently. In addition, you will be introduced to SMAW and GMAW processes, and will be taught the science behind basic metal work. Welding III GMAW (MIG Welding) Date: March 2 25, 2015 Monday & Wednesday Time: 5:00 p.m. 9:00 p.m. Cost: $319 (plus $49 supply fee) Hours: 32 This class is designed to provide the beginning GMAW welder more advanced knowledge in the theory, proper operation and setup procedures to develop the necessary skills to achieve an entry level position in the GMAW welding process. 16 Welding II Applied Welding Blueprint Reading Date: January 21 February 18, 2015 Monday & Wednesday Time: 5:00 p.m. 9:00 p.m. Cost: $319 (plus $49 supply fee) Hours: 32 Gain hands on experience performing a variety of standard welding jobs from start to finish. You will learn to read a blueprint and perform the weldment indicated on the blueprint, as well as basic fabrication. Prerequisite: Welding I or previous welding experience Welding IV SMAW (Stick Welding) Date: April 6 29, 2015 Monday & Wednesday Time: 5:00 p.m. 9:00 p.m. Cost: $319 (plus $49 supply fee) Hours: 32 This class is designed to provide the beginning SMAW welder more advanced knowledge in the theory, proper operation and setup procedures to develop the necessary skills to achieve an entry level position in the SMAW welding process.

17 PART-TIME PROGRAMS Welding V GTAW (TIG welding) Date: May 4 June 2, 2015 Monday & Wednesday Time: 5:00 p.m. 9:00 p.m. Cost: Hours: 32 $319 (plus $49 supply fee) This class is designed to provide the beginning GTAW welder knowledge in the theory, proper operation and setup procedures to develop the necessary skills to achieve an entry level position in this welding process. Prerequisite: Welding I or previous welding experience Welding VI Pipe Welding Date: September 16 November 21, 2014 Tuesday & Thursday Time: 5:00 p.m. 10:00 p.m. Cost: $999 (plus $199 supply fee) Hours: 100 This class is designed to provide advanced SMAW welding students with experience in setup and procedure for welding various diameter pipes in 1G, 2G, 5G and 6G positions. Successful completion of the course will prepare the student for an entry level job in the pipe welding field. Prerequisite: Previous welding & SMAW job experience Welding VII Certification Class Pipe & Plate Certifications Date: January 20 29, 2015 Tuesday & Thursday Time: 5:00 p.m. 10:00 p.m. Cost: $199 (plus $25 supply fee) Hours: 20 This course is designed to provide advanced students with lab time overseen by a Certified Welding Inspector qualified to issue state certifications. Materials and equipment will be provided, and the student may acquire as many certifications as they can complete in the time allotted. Processes included: SMAW, GMAW, GTAW, and students may choose which certifications they test for, tailoring this class time to their own career goals. Prerequisite: Advanced welding experience SPECIALIZED TRAINING 17

18 PART-TIME PROGRAMS 18 Faster than Average Job Growth Expected for Medical Careers... ON DEMAND These classes are offered on demand. If you have a group of 3 or more, we will schedule a class just for you. u SERVSAFE Certification Program u SERVSAFE Food Handler Program u Basic Life Support for Healthcare Providers u CPR for Family & Friends u Heartsaver AED CPR u Heartsaver CPR Call for details and pricing at MEDICAL PROGRAMS Clinical Medical Assistant Program * Fall: October 7, 2014 January 27, 2015 Tuesday & Thursday Spring: March 3 June 4, 2015 Tuesday & Thursday Time: 6:00 p.m. 9:30 p.m. (plus 6 Saturdays from 9:00 a.m. 4:30 p.m.) Cost: $2,599 Hours: 140 Classroom & 160 Clinical This program prepares you to become a medical assistant and perform patient clinical skills in the medical office setting. You will perform clinical procedures including administering medications, assisting with minor surgery, performing an electrocardiogram, obtaining laboratory specimens for testing, educating patients, and maintaining clinical equipment in an ambulatory care setting. Medical assistants perform routine clinical tasks to keep the offices of physicians, podiatrists, chiropractors, and optometrists running smoothly. This program will provide you with the necessary training and skills required to challenge the National Healthcareer Association (NHA) Certified Clinical Medical Assistant (CCMA) national examination. This 140 hour program requires 140 classroom hours (lecture and labs) and a clinical externship. You must successfully complete the 140 hour classroom requirement to be eligible to participate in the clinical externship rotation. Upon successful completion of the Clinical Medical Assistant program you will have the skills necessary to gain employment in a number of capacities. Job opportunities will be prevalent in physician s offices, clinics, chiropractor s offices and outpatient facilities. The occupational outlook handbook, states that employment of medical assistants is expected to grow 35% from 2011 to 2016, much faster than the average. *Pending approval of the institutions accrediting agency.

19 PART-TIME PROGRAMS Dental Assisting Program * Fall: Oct. 13 Dec. 10, 2014 Monday & Wednesday Spring: March 16 May 11, 2015 Monday & Wednesday Time: 6:00 p.m. 9:30 p.m. Cost: $1,199 Hours: 60 The 60 hour Dental Assisting Program will prepare you for entry level positions in one of the fastest growing health care positions Dental Assisting. The purpose of this course is to familiarize you with all areas of pre-clinical dental assisting and provide training in the professional skills required to function as an assistant in the dental practice. This course covers the following key areas and topics Administrative Aspects: the history of dentistry and dental assisting, introduction to the dental office, the legal aspects of dentistry and dental assisting, policies and guidelines. Clinical Aspects include: introduction to oral anatomy, dental operatory, dental equipment, operation, and maintenance, introduction to tooth structure, primary and permanent teeth, the oral cavity and related structures, proper patient positioning, dental hand-pieces, dental anesthesia, sterilization, maintaining sterility and asepsis and other areas. In addition to entry-level administrative jobs, this course is ideal for students interested in pursuing a future formal Dental Hygienist program. The program includes graded quizzes and exams. *Pending approval of the institutions accrediting agency. Pharmacy Technician Fall: Oct. 21 Dec. 11, 2014 Tuesday & Thursday Spring: March 24 May 12, 2015 Tuesday & Thursday Time: 6:00 p.m. 9:30 p.m. Cost: $1,199 Hours: 50 Here is your chance to set yourself apart and learn a career track that will qualify you for entry level positions in retail pharmacies, hospitals, clinics and extended care facilities. Our Pharmacy Technician program is an instructor led classroom that will prepare you with the following skills: safety, health care, drug regulation and control, workplace related terminology, prescriptions, calculations, routes and formulations, basic biopharmaceutics, factors affecting drug activity, workplace information sources, inventory management, financial issues, community pharmacy, hospital pharmacy, other pharmacy environments, common drugs and their uses, and career development. The bureau of labor statistics projects pharmacy technicians to grow 20% from faster than the average for other occupations. The medium annual wage expected can be $29,320. Once you have successfully completed this course, you will be given a voucher to take the CPHT Certified Technician exam. ENROLL EARLY Penta Career Center Adult & Continuing Education

20 PART-TIME PROGRAMS 20 NEW CLASS EVERY 2 MONTHS MEDICAL PROGRAMS State Certified Nurse s Aide (STNA) Classes Start every 2 months Call to register for next available class at Tuition: $395 Ohio Department of Health Approved Nurse Aide Training Program If you have a desire to help others, then attend Penta s Nurse Aide program and become State Certified. This 77.5 hour program includes 59.5 hours of classroom instruction and 18 hours of clinical instruction. Career possibilities include: hospitals, long term care, hospice, physician s office, assisted living, and more. Tuition does not include the $100 State Testing Fee. This fee is the responsibility of the student. Check for State Test is due 2 weeks before final test date. Scrubs required. How to Register for STNA: Stop by the office to pick up a registration and medical packet. Or download and print the registration and medical packet from our website Financial Aid may be available to qualified applicants by contacting one of the following one of the agencies listed 4-5 weeks prior to starting the class. WorkKeys Pre-entrance Assessment $30. (non-refundable), paid by student, 1 week prior to assessment. All Nurse Aide (STNA) program candidates, regardless of previous education or degrees, must complete the ACT WorkKeys diagnostic examination. This exam takes approximately 3 hours and consists of three 55 minute components over Math, Reading, and Locating Information. Call to schedule an appointment. Provide a copy of high school diploma or GED. Present proof of a negative TB test within the last 6 months, on or before the FIRST DAY OF CLASS. (You cannot attend if not completed). Present proof of a medical history and physical (forms provided) within the last 6 months. Present BCI (fingerprinting) background check with no criminal history, on or before the FIRST DAY OF CLASS. (You cannot attend if not completed). I swear and affirm that I have not been convicted of a crime, other than minor traffic violations. I understand that Senate Bill 160 will not permit individuals with certain misdemeanors and felonies to work in Long- Term Care Facilities. The background check may be done at Penta Career Center, by appointment. Call Cost of $66 will be due prior to the appointment time. Or, if this is done by another agency, the results must be mailed to: Penta Career Center Adult Education Division 9301 Buck Road, Perrysburg, OH 43551

21 ONLINE E-LEARNING HEALTHCARE COURSES Penta Career Center announces the availability of our new online e-learning healthcare courses from Health Ed Today! These courses are highly interactive and provide students with an enriched learning experience. Each course includes: 24 hour a day instructor support & course mentors Engaging labs, student exercises & course videos All textbooks, workbooks & student materials A new Secure Student Website including career resources & other training Certain programs include clinical externships! Ask us about national or state certification and clinical externship opportunities through these courses! The following courses are available anytime! Pharmacy Technician / Student Tuition: $1,299 Clinical Medical Assistant / Student Tuition: $2,499 Dental Assisting / Student Tuition: $1,299 Medical Billing & Coding / Student Tuition: $1,399 Medical Coding ICD-10 / Student Tuition: $999 EKG Technician / Student Tuition: $1,299 Electronic Health Records Mgmt. / Student Tuition: $1,299 Phlebotomy Technician / Student Tuition: $1,299 Medical Administrative Asst. / Student Tuition: $1,299 Dialysis Technician / Student Tuition: $1,299 Medical Terminology / Student Tuition: $499 ECG / EKG Course for Nurses / Student Tuition: $699 To ensure that all students have the resources they need to succeed, students will have access to a secure Student Portal website which includes: Career building exercises, resume writing tips, interview techniques, etc. Career mentors there to help students take the next step in their career! Other skills training including lifelong learning skills, healthcare review, etc. Visit us online at to experience a Course Demo and to learn more about these exciting new programs! For additional information, please contact Penta Career Center at , rhogrefe@pentacc.org, or call toll free The Health Ed Today courses were developed through a partnership with leading education organizations including Pearson Education, E-College and Condensed Curriculum International. Medical Coding ICD-10 * Student Tuition: $999 Effective October 2014, the U.S. healthcare system is working to move from ICD-9 to ICD-10 for service coding purposes. Program includes a detailed review of both ICD-10 (diagnostic coding) and ICD-10-PCS (inpatient procedural coding), differences between ICD-9 and ICD-10, federal regulation, hands on exercises and case studies, and much more! NEW ONLINE *Pending approval by the institution s accrediting agency 21

22 22 LEARN FROM HOME *Pending approval by the institution s accrediting agency ONLINE E-LEARNING HEALTHCARE COURSES EKG Technician * Student Tuition: $1,299 This EKG Technician Program prepares you to perform EKG s. This course will include information on anatomy and physiology of the heart, medical disease processes, medical terminology, medical ethics, legal aspects of patient contact, electrocardiography, and stress testing. A highly interactive course! Electronic Health Record Management Program * Student Tuition: $1,299 This Electronic Health Record (EH R) Management program prepares you to understand and use electronic records in a medical practice. Course reviews the implementation and management of electronic health information using common electronic data interchange systems and maintaining the medical, legal, accreditation and regulatory requirements of the electronic health record. Medical Administrative Assistant * Student Tuition: $1,299 This course covers information on the medical assisting profession, interpersonal skills, medical ethics and law, medical terminology, basics of insurance billing and coding, telephone techniques, scheduling appointments, medical records management and management of practice finances. A great course for physicians medical office professionals! Dialysis Technician * Student Tuition: $1,299 This Dialysis Technician Program provides you with the knowledge needed to perform the responsibilities of a Dialysis Technician. It reviews normal kidney physiology, the basic principles of hemodialysis, kidney dialysis machines, dialyzer preparation and reprocessing as well as how to assist dialysis patients in managing their disease and treatment. Medical Terminology * Student Tuition: $499 This course is a guide to identifying and understanding the basic word structure, root words, suffixes, and prefixes, the organization of the human body and the associated systems, medical abbreviations, symbols and common medical terms. ECG / EKG Course for Nurses * Student Tuition: $699 This course is a valuable resource for learning the fundamentals of reading and interpreting ECGs. Course information includes: cardiac anatomy and physiology, electrical basis of ECGs, sinus dysrhythmias, and much more.

23 Take ed2go online courses offered by Penta, from the comfort of your home or office at the times that are most convenient for you! We offer you hundreds of engaging online courses for adults, covering every topic from Anatomy to Web Design. Each ed2go course comes equipped with a patient and caring instructor, lively discussions with your fellow students, and plenty of practical information that you can put to immediate use. All courses run for six weeks (with a two-week grace period at the end). Courses are project-oriented and include lessons, quizzes, handson assignments, discussion areas, supplementary links, and more. You can complete any of these courses entirely from your home or office and at any time of the day or night. ed2go ONLINE COURSES How to Get Started: 1. Visit our Online Instruction Center: 2. Click the Courses link, choose the department and course title you are interested in and select the Enroll Now button. Then follow the instructions to enroll and pay for your course. You will choose a username and password that grants you access to the Classroom. 3. When your course starts, return to our Online Instruction Center and click the Classroom link. To begin your studies, simply log in with the username and password you selected during enrollment. Sessions Start Dates: New course sessions begin each month. Please visit our Online Instruction Center to see exact dates for the courses that interest you. Requirements: All courses require internet access, , Netscape Navigator or Microsoft Internet Explorer web browser. Some courses may have additional requirements. Please visit our Online Instruction Center for more information. ONLY $99! 23

24 FREE ABLE, GED & ESOL ADULT BASIC EDUCATION OFFERING CLASSES IN: u ABLE (Adult Basic Literacy Education) u GED Prep/ESOL Classes u CHESS Class (Career Help en ABLE ing Student Success) Penta s Adult Basic Education program is a student-centered learning opportunity for adults who desire to improve their learning and earning opportunities. These classes provide you an opportunity to improve reading, writing and math skills. We prepare you to take the Official GED Test. Penta Career Center offers classes at 37+ locations across Lucas, Putnam, Williams and Wood Counties. We partner with Sylvania City Schools, Northwest Community Corrections, Putnam County Educational Service Center, Friendship New Vision, Educational Service Center of Lake Erie West and Corrections Commission of Northwest Ohio, to provide these services. Classes are held two days a week, four hours each session. For days, times, and locations visit our website at: Registration is required and orientation is mandatory. Call to register. GED Testing Requirements Log on to to select and schedule the official test. The subjects are Math, Science, Social Studies and Reasoning through Language Arts. Penta Career Center offers enrolled students an opportunity to take a practice test at no charge. An $80 voucher is available to be used for the official GED Test. ESOL English for Speakers of Other Languages u Students who want to better communicate in all settings will benefit from ESOL classes. u ESOL classes are designed to help students improve reading, writing, listening to and speaking English. u Students may study and take the Citizenship or TOEFL test. u Class is free. u Call to register and for class location. 24

25 GENERAL INFORMATION CONTACT INFORMATION: Monday Thursday: Friday: Summer Hours: Monday Friday: 8:30 a.m. 8:00 p.m. 8:30 a.m. 3:30 p.m. 8:30 a.m. 3:30 p.m. TELEPHONE & FAX NUMBERS Phone: Fax: ACCREDITATION Penta Career Center is fully accredited by the North Central Association Commission on Accreditation and School Improvement for Colleges and Schools and by the Ohio Board of Regents. CERTIFICATION TEST, SUPPLIES & TOOLS When required, are included in the course fees and are not refundable. Tool kits are packaged and not broken up. Tool kits become the property of the student upon the successful completion of the program. CLASS CANCELLATIONS The school reserves the right to cancel any class. In such cases, a FULL refund will be made with the exception of the administrative fee, and if applicable in rare circumstances, tuition and other fees if the course is canceled during the program year. In these very rare cases, the tuition and fees will be pro-rated based on the portion of the course that was completed before the cancellation. ADMISSION POLICY Equal Opportunity: It is the policy of the Penta Career Center that educational activities, employment practices, programs and services are offered without regard to race, color, national origin, gender, religion, disability or age. *NOTE: Detailed information regarding admission policy and admission requirements can be found in our Adult Education Student Handbook, which may be viewed by going to ADMISSION REQUIREMENTS Hold a High School Diploma or GED* Satisfactory completion of WorkKeys Assessment (see page 27) Program specific requirements (see the individual program descriptions) Pay a $30 non-refundable administrative fee Must be 18 years of age or older *NOTE: Some part-time programs may be taken without a High School Diploma/GED. Contact our office for individual assessment. DISMISSAL A student may be dismissed if he/she does not meet the requirements of the program. This includes a lack of attendance, unsatisfactory academic performance, failure to follow the rules and regulations of Penta Career Center, or failure to stay current on financial obligations. *NOTE: For a complete listing of rules and regulations for conduct, see the Adult Education Student Handbook at CERTIFICATES / PASSPORTS Certificate of Achievement: A Certificate of Achievement is issued to any student who successfully completes a part time program. Certificate of Completion: A Certificate of Completion will be awarded as part of the Career Passport to a student who meets the attendance requirements and mastered the appropriate skills. The grading scale for Penta Career Center Adult Education is as follows: Grading Scale Outstanding Performance Acceptable Performance Limited Performance Below 70 Unsatisfactory Performance SCHOOL CLOSINGS (Due to Inclement Weather) The Adult Education classes will meet as scheduled, unless road conditions become hazardous. In such case, a decision will be made by 2:00 p.m. Listen to the local TV and radio stations for closing information STUDENT RECEIPTS Students must keep their receipts for refunds or exchanges. 25

26 GENERAL INFORMATION 26 FINANCIAL AID FOR FULL TIME CLASSES FINANCIAL AID Financial Aid is available through a variety of sources for qualified individuals. Each source has its own specific guidelines. For information about your best options for Financial Aid, please contact the Financial Aid Office at Penta Career Center Adult Education participates in the following Financial Aid programs: The Federal PELL Grant: The Federal PELL Grant: This is a federal grant that awards funds through the U.S. Department of Education. Students can apply on line at Penta s school code is Veteran s Educational Benefits: Selected training programs are approved for training Veterans. Apply on line at Workforce Development: The Workforce Investment Act provides funding for underemployed and dislocated workers. Call the local area One-Stop Center or the Department of Jobs and Family Services. TAA: The Trade Adjustment Assistance Act offers funding to certain individuals whose company has closed its facilities displacing the employees. Bureau of Vocational Rehabilitation (BVR): This agency provides funding for individuals with disabilities. Call TEXTBOOKS, SUPPLIES & TOOLS Textbooks are included in tuition unless otherwise noted, and are non-refundable. GENERAL EQUIVALENCY DIPLOMA (GED) Penta Adult & Continuing Education provides the opportunity for all students lacking a high school diploma to successfully complete their GED prior to admission into our Full-Time programs at Penta Career Center. LIABILITY & CAMPUS SECURITY Penta Career Center is not responsible for theft of personal property or personal injuries occurring on campus. Students are responsible for all monetary losses resulting from theft or injuries and should have their own personal insurance policy. Penta is not responsible for any losses or injuries that may occur while working on projects, cars, etc. In case of an emergency, Emergency Service, 911, will be called and will take charge of the emergency situation upon their arrival. PROGRAM CANCELLATIONS The Adult and Continuing Education administration reserves the right to cancel any classes due to insufficient enrollment throughout the duration of the course. For this reason, please register early to reserve a place in the program of your choice. PROGRAM TRANSFERS A Pell eligible student who enrolls in another Penta career training program in another school year will begin with a new Pell award. For each additional program, the student will have up to 900 hours funded by Pell to complete the program. GRIEVANCE PROCEDURES An alleged formal discrimination grievance complaint should first be made to the Adult Education Supervisor within ten (10) school days of the date the incident occurred. This complaint is to state the date, time, place, and people involved. It can be made verbally or in writing. *NOTE: Detailed grievance procedure can be found in the Adult Education Student Handbook at www. pentacareercenter.org/adulted_home.aspx. WITHDRAWALS & REFUNDS (Full-Time Programs) Students who withdraw from Job Training programs (for any reason) will receive tuition refunds on the following basis: Withdrawal Before start of Course 100% Between Day 1 & Day 3 of Course 90% After Day 3 of Course NO REFUND Full-Time students wishing to withdraw from classes should do so before the end of the first week of class. Please refer to the Withdrawal table. A $30.00 administrative fee is non-refundable. A part-time student will receive a refund only if they cancel or withdraw a week prior to the start of class. NO REFUND will be issued after that time. Refunds are processed and issued within two to four weeks. You will be responsible for all unpaid balances once you withdraw or drop a class after applicable refunds are applied.