BUTTERFLY VALVES. Applicable media. Alum. Bronze T. Z G 1 Cr 18 Ni 9 Ti. Note: Other materials upon request
|
|
|
- Heather Warren
- 7 years ago
- Views:
Transcription
1 SUFA BUTTERFLY VALVES Product introduction This product is ideal for throttling or shutting of the flow of corrosive or incorrosive gases, liquids, semiliquids and solid powder, and can be installed in any selected position in pipelines or on vessels in the industries of petroleum processing, chemicals, food, medicine, textile, paper making, hydroelectricity, engineering, ship building, water supply and sewage, metallurgy... Features Small in size and light in weight. Easy installation and maintenance. It can be mounted wherever needed Simple and compact construction, quick 90º ON-OFF operation Minimized operating torque, energy saver By bonding the elastomer to a phenolic backing ring complete support and stability of the seat is assured Flow curve trends to a straight line. Excellent regulating performance. Technical Data DN (Nominal Diameter) DN DN PN (Nominal Pressure) 1.0 MPa 1.6 MPa Sealing test 1.1 MPa 1.76 MPa Testing Pressure Shell test 1.5 MPa 2.4 MPa Working Temperature Applicable media -15 a +150ºC Fresh water, Sewage, Sea water, Air, Steam, Food, Medicine, Oils, Acids, Alkalis, Salts, etc. Materials Body Stem Bushing Material Code Material Code Material Material Material Code Cast Iron Z Plated Ductile Iron B1 NR X1 Ductile Iron Q Alum. Bronze B2 Hypalon X2 Alum. Bronze T Stainless steel Z G 1 Cr 18 Ni 9 Ti B3 EPDM X3 CF8 P Titanium B4 Neoprene X4 CF8M R CF8M B6 Stainless steel Lubrized Bronze PTFE NBR X5 Carbon steel C CF8M B7 Wear-resistant rubber X6 Viton X7 Heat-resistant rubber X9 PTFE F4 Note:
2 DANYANG SUFA Product Range CENTRIC TYPE BUTTERFLY VALVES Wafer or Lug type. DN Maximum working conditions: Temperature: -20 to +150ºC Pressure: DN32-600: 16 bar DN : 10 bar Flange connections: ASME B16.5 ASME B16.47 Series A or B DIN 2501 PN10/16 JIS B2220 5K/10K/16K BS 10 E AS2129 E AWWA Class D Body and material: Cast Iron, Ductile Iron, Carbon steel, Stainless steel, Duplex, Super Duplex, Aluminium Bronze, Monel, Inconel, Hastelloy CN7M, CF8, CF8M material: EPDM, NBR, Viton, Hypalon, Neoprene, PTFE Applicable media: Fresh water, Sewage, Sea water, Air, Steam, Food, Medicine, Oils, Acids, Alkalis, Salts... FULL ELASTOMER LINED CONCENTRIC FLANGED BUTTERFLY VALVES Flanged type. DN Maximum working conditions: Temperature: -20 to +150ºC Pressure: 16 bar Flange connections: DIN 2501 PN10/16 ASME B16.5 Class 150 ASME B16.47 Class 150 Series A JIS10K AWWA C207 Class D Body and material: Ductile Iron, Cast steel, Duplex, Super Duplex, Aluminium Bronze, Monel, Inconel, Hastelloy CN7M, CF8, CF8M material: EPDM, NBR, Viton, Hypalon, Neoprene Applicable media: Fresh water, Sewage, Sea water, Air, Steam, Food, Medicine, Oils, Acids, Alkalis, Salts... 15
3 BUTTERFLyvalves DOUBLE ECCENTRIC BUTTERFLY VALVES Flanged, Lug or Wafer type. DN Maximum working conditions: Temperature: -20 to +150ºC Pressure: 25 bar Flange connections: DIN 2501 PN10/16/25 ASME B16.5 Class 150 ASME B16.47 Class 150 Series A or B AWWA C207 Class D or E Body and material: Cast Iron, Ductile Iron, Cast steel, Duplex, Super Duplex, Aluminium Bronze, Monel, Inconel, Hastelloy CN7M, CF8, CF8M material: EPDM, NBR, Viton, Hypalon, Neoprene Applicable media: Fresh water, Sewage, Sea water, Air, Steam, Food, Medicine, Oils, Acids, Alkalis, Salts... HIGH PERFORMANCE BUTTERFLY VALVES Flanged, Wafer or Lug type. DN Maximum working conditions: Temperature: -196 to +180ºC Pressure: DN50/600: 50 bar DN : 25 bar Flange connections: DIN 2501 PN10/16 ASME B16.5 Class 150 & 300 ASME B16.47 Series A or B Body and material: Cast steel, Duplex, Super Duplex, Aluminium Bronze, Monel, Inconel, Hastelloy CN7M, CF8, CF8M material: PTFE or R-PTFE Applicable media: Liquid or gaseous corrosive mediums 16
4 DANYANG SUFA - Product Range SUFA TRIPLE ECCENTRIC METAL SEAT BUTTERFLY VALVES Flanged, Wafer or Lug type. DN Maximum working conditions: Temperature: -20 to +150ºC Pressure: 50 bar Flange connections: DIN 2501 PN10/16/25/50 ASME B16.5 Class 150 & 300 Body and material: Cast steel, LCB, WC6, Stainless steel Applicable media: Water, Oil, Gas and other corrosive mediums DAMPER BUTTERFLY VALVES (Fabricated steel construction) Flanged type. DN Maximum working conditions: Temperature: -50 to +650ºC Pressure: 2,5 bar Body and material: Carbon and Stainless steel Applicable media: Gas conductions, High consistency smoke cleaners 17
5 BUTTERFLyvalves GG25 PN16 - Face to face DIN 3202 Lever RK-MA Series PN16 Type: Face to face DIN 3202 GG25 PN16 - Wafer Materials Body Cast Iron GG25 Epoxy resin coated Nodular Cast Iron Nickel plated GGG40 Shaft Stainless steel to ASTM A EPDM Others Between fanges DIN 2501 PN10/16 and ASME B16.5 Class 150 Temperature Range -15ºC to +150ºC Flange dimensions GB/T PN 1.0 MPa Tests and Inspection API 609 & API 598 Certificates EN/ISO 9001, PED (CE 0062) 1 Body 1 GG25 2 Bushing 2 PTFE 3 Shaft 1 ASTM A EPDM 5 1 GGG40 Ni 6 Cone Pin 1/2 ASTM A Rivet 1 Stainless steel 8 Label 1 Stainless steel 9 Bushing 2 PTFE 10 O-ring 3 EPDM 11 Bolt 2 Carbon steel 12 Hexagonal nut 2 Carbon steel 13 C ring Notch plate 1 Carbon steel 15 Key Lever 1 GG25/GG40 Ni/EPDM PN16 Wafer Butterfly valve DN-50/300 Lever Article Number DN D1 D2 D3 D4 A B C E L F Weight (kg)
6 SUFA GG25 PN16 - Face to face DIN 3202 Gear operated RK-MA Series PN16 Type: Face to face DIN 3202 GG25 PN16 - Wafer Materials Body Cast Iron GG25 Epoxy resin coated Nodular Cast Iron Nickel plated GGG40 Shaft Stainless steel to ASTM A EPDM Others Between fanges DIN 2501 PN10/16 and ASME B16.5 Class 150 Temperature Range -15ºC to +150ºC Flange dimensions GB/T PN 1.0 MPa Tests and Inspection API 609 & API 598 Certificates EN/ISO 9001, PED (CE 0062) 1 Body 1 GG25 2 Bushing 2 PTFE 3 Shaft 1 ASTM A EPDM 5 1 GGG40 Ni 6 Pin 1/2 ASTM A Rivet 1 Stainless steel 8 Label 1 Stainless steel 9 Bushing 2 PTFE 10 O-ring 3 EPDM 11 Bolt 4 Carbon steel 12 C ring Key Worm gear 1 (**) (**) Worm gear available as an accesory. Consult features and prices 2 GG25/GGG40 Ni/EPDM PN16 Wafer Butterfly valve DN-50/300 Gear operated Article Number DN D1 D2 D3 D4 H1 H2 C L L1 L2 L3 L4 D5 Weight (kg)
7 BUTTERFLyvalves GGG40 PN16 - Face to face DIN 3202 DN Lever RK-MA Series PN16 Type: Face to face DIN 3202 GGG40 PN16 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 598 & API 609 Between fanges DIN 2501 PN10/16 or ASME 16.5 Class150 Tests and Inspection DIN 3230 Face to face dimensions DIN Body 1 GGG40 2 Bearing 2 Self lubricating Bronze 3 Shaft 1 ASTM A EPDM/NBR 5 1 ASTM A351 CF8M 6 Cone Pin 1 ASTM A Rivet 2 Aluminium 8 Label 1 Stainless steel 9 Bushing 2 Self lubricating Bronze 10 O-ring 1 EPDM 11 Bolt 2 Carbon steel 12 C ring Nut 2 Carbon steel 14 Notch plated 1 Carbon steel 15 Lever Worm gear 1 GGG40/316/EPDM PN16 Wafer Butterfly valve DN-50/300 Lever Article Number DN D1 D2 D3 D4 H1 H2 H3 L F Weight (kg) ISO 5211 D5 D6 D7 D8 w F F F F F F F
8 SUFA GGG40 PN16 - Face to face DIN 3202 DN Gear operated RK-MA Series PN16 Type: Face to face DIN 3202 GGG40 PN16 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 598 & API 609 Between fanges DIN 2501 PN10/16 or ASME 16.5 Class150 Tests and Inspection DIN 3230 Face to face dimensions DIN Body 1 GGG40 2 Bearing 2 Self lubricating Bronze 3 Shaft 1 ASTM A EPDM/NBR 5 1 ASTM A351 CF8M 6 Pin 1 ASTM A Rivet 2 Aluminium 8 Label 1 Stainless steel 9 Bushing 2 Self lubricating Bronze 10 O-ring 1 EPDM 11 Bolt 2 Carbon steel 12 C ring Worm gear 1 GGG40/CF8M/EPDM PN16 Wafer Butterfly valve DN-150/300 Gear operated Article Number DN D1 D2 D3 D4 D5 L1 L2 L3 L4 H1 H3 Weight (kg) ISO F F F F F F F F F10 21
9 BUTTERFLyvalves GGG40 PN10 - Face to face DIN 3202 DN RK-MA Series PN10 Type: Face to face DIN 3202 GGG40 PN10 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 598 & API 609 Between fanges DIN 2501 PN16 Tests and Inspection DIN 3230 Face to face dimensions DIN Body 1 GGG40 2 Bushing 2 Self lubricating Bronze 3 Shaft 1 ASTM A EPDM/NBR 5 1 ASTM A351 CF8M 6 Pin 1 ASTM A Rivet 2 Aluminium 8 Label 1 Stainless steel 9 Bushing 2 Self lubricating Bronze 10 O-ring 1 EPDM 11 Bolt 2 Carbon steel 12 C ring Worm gear 1 GGG40/CF8M/EPDM PN10 Wafer Butterfly valve DN-350/500 Gear operated Article Number DN D1 D2 D3 D4 D5 D6 D7 L1 L2 H1 H2 C L Weight (kg) ISO 5211 D8 D9 B w F F F F
10 SUFA GGG40 PN10 - Face to face DIN 3202 DN600 RK-MA Series PN10 Type: Face to face DIN 3202 GGG40 PN10 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 609 Between fanges DIN 2501 PN10 Tests and Inspection API 598 Face to face dimensions DIN 3202 Item Description Material 1 End cap GGG40 2 Bolt Carbon steel 3 C ring Body GGG40 5 Bushing Self lubricating Bronze 6 Shaft ASTM A ASTM A351 CF8M 8 Pin ASTM A EPDM 10 Bushing Self lubricating Bronze 11 Rivet Aluminium 12 Label Stainless steel 13 O-ring EPDM 14 Bushing Self lubricating Bronze 15 Bolt Carbon steel 16 C ring Lever Worm gear GGG40/CF8M/EPDM PN10 Wafer Butterfly valve DN-600 Gear operated Article Number DN D D1 D2 D3 D4 D5 H1 H2 L1 L2 L3 L4 C L D6 N Weight (kg.)
11 BUTTERFLyvalves GGG40 PN16 - Face to face DIN 3202 DN RK-MA Series PN16 Type: Face to face DIN 3202 GGG40 PN16 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 598 & API 609 Between fanges DIN 2501 PN16 Tests and Inspections DIN 3230 Face to face dimensions DIN Body 1 GGG40 2 Bushing 2 Self lubricating Bronze 3 Shaft 1 ASTM A EPDM/NBR 5 1 ASTM A351 CF8M 6 Pin 1 ASTM A Rivet 2 Aluminium 8 Label 1 Stainless steel 9 Bushing 2 Self lubricating Bronze 10 O-ring 1 EPDM 11 Bolt 2 Carbon steel 12 C ring Worm gear 1 GGG40/CF8M/EPDM PN16 Wafer Butterfly valve DN-350/500 Gear operated Article Number DN D1 D2 D3 D4 D5 D6 D7 L1 L2 H1 H2 C L Weight (kg) ISO 5211 D8 D9 B w F F F F
12 SUFA GGG40 PN16 - Face to face DIN 3202 DN600 RK-MA Series PN16 Type: Face to face DIN 3202 GGG40 PN16 - Wafer Materials Body Nodular Cast Iron GGG40 Stainless steel ASTM A351 CF8M Shaft Stainless steel ASTM A EPDM or NBR Standards Design & Manufacturing API 609 Between fanges DIN 2501 PN16 Tests and Inspection API 598 Face to face dimensions DIN End cap 1 GGG40 2 Bolt 2 Carbon steel 3 C ring Body 1 GGG40 5 Bushing 1 Self lubricating Bronze 6 Shaft 2 ASTM A ASTM A351 CF8M 8 Pin 1 ASTM A EPDM 10 Bushing 1 Self lubricating Bronze 11 Remache 1 Aluminio 12 Etiqueta 1 Acero inoxidable 13 O-ring 1 EPDM 14 Bushing 2 Self lubricating Bronze 15 Bolt 4 Carbon steel 16 C ring Lever Worm gear 1 Butterfly valve GGG40/CF8M/EPDM PN16 Wafer DN-600 Gear operated Article Number DN D D1 D2 D3 D4 D5 H1 H2 L1 L2 L3 L4 C L D6 N Weight (kg.)
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Single Disc Check Valves
Single Disc Check Valves 01 Profile FLOVEL Valves Pvt. Ltd., earlier known as rpita Enterprise, has been manufacturing Check Valves since 1984. It is committed to manufacture high performance Check Valves
TECHNO Multi-Purpose Check Valves for Industry
Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED ENDS, PLAIN
P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Butter y valves Plastic and Metal
Butter y valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Types 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting Disk Check Valve Body Shaft Disk Bearing bush Seat Technical details Nominal pressure PN 10 / PN 16 Nominal diameter DN 200...1200 Fields of application:
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
HIGH STANDARD VALVES FOR NON-STANDARD CONDITIONS.
HIGH STANDARD VALVES FOR NON-STANDARD CONDITIONS. ZWICK: MANUFACTURER OF HIGH STANDARD TRIPLE OFFSET VALVES. 100% ZERO-LEAKAGE 100% MADE IN GERMANY 100% QUALITY Zwick is a leading manufacturer of valves
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Triple Eccentric Metal Seated Valves MV Series
Triple Eccentric Metal Seated Valves MV Series The Power to Perform. Orton is part of IMI UK - Severe Service Division, a leading supplier of specialty flow control products, with a presence on each continent.
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
RESILIENT SEATED Butterfly Valves. Jamieson Equipment Company 5314 Palmero Court Buford, GA 30518 800.875.0280 sales@jamiesonequipment.
R CONTROLS INDEX RESILIENT SEATED Butterfly Valves INDEX Butterfly Valves Page Series 20 wafer 1-20 (25mm-500mm) 150 psi (10.3 Bar) 8 Series 21 lug 1-20 (25mm-500mm) 150 psi (10.3 Bar) 8 Series 22 wafer
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
Butterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
BUMAX. REYHER your partner for the BUMAX range
BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
Handling Corrosive or Abrasive Liquids
Handling Corrosive or Abrasive Liquids Defining abrasion and corrosion An abrasive liquid is one that has particles in it. Some, like inks, have very fine particles, while others, like some paints, contain
FITTINGS AND VALVES. Ductile Cast Iron Hydrants
FITTINGS AND VALVES Ductile Cast Iron Hydrants Düker Hydrants Important Elements of a Modern Public Water Supply Ductile cast iron hydrants Düker underground and pillar hydrants Hydrants are an important
BERMAD Waterworks. High Pressure, Surge Anticipating Control Valve. 800 Series. Model 835-M. Features and Benefits. Major Additional Features
High Pressure, Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
G. VULCANIZED SEAT Pressure sensitive seating with full disc overlap provides positive seating at high and low pressures.
A B C D G F E J H I A. RETAINER PLUGS Retain hinge and stop pins while providing compression to stabilization spheres. B. STABILIZATION SPHERES Stabilize hinge and stop pins, preventing vibration and wear.
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Duplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
EROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
Accumulators, Accessories and Spares
Accumulators, Accessories and Spares HY10-4004/UK - Effective June 1st, 2013 Index Table of Contents Table of Contents 2 Introduction 3 How to Size? 4 General Information Accumulators 5-8 Bladder Accumulators
CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
gasket type & material overview
gasket type & material overview gaskets a gasket is placed in between two objects in order to prevent leakage of any kind of the pressurized or not pressurized media. most important is the compression
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
The Coating Machinery Experts Supplier Questionnaire
Date: Completed by: Company Data 1.1 General Data Full company name, legal form and address: Short form of company name: Country: USt. ID/ VAT Reg./ N.IVA/ NIPIC/ UID Nr./ ID TVA: Company homepage: www.
Authentic ITT Service Parts
Pure-Flo Authentic ITT Service Parts Providing our customers with a quality product has always been an integral part of how ITT does business. Building on this commitment your Authorized Distributor of
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
VersaFlow Mag 100 Electromagnetic Flow Sensor Specifications
VersaFlow Mag 100 Electromagnetic Flow Sensor Specifications 34-VF-03-08 September 2009 The Economical Solution The VersaFlow Mag 100 flow sensor is an economical solution for a wide range of applications.
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
F L A N G E G A S K E T S
FLANGE GASKETS Product overview of flange gaskets for specific information: +44 (0)121 501 20 21 Rubber Rubber sheet and gaskets of NBR, EPDM and CR are used in a wide variety of machine and equipment
BUTTERFLY VALVES. Quality, Service. A history of. and Innovation TABLE OF CONTENTS
BUTTERFLY VALVES A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The