Spring Cage Installation Terminal Blocks STI 2,5 and STI 4
|
|
- Dulcie Lindsey
- 7 years ago
- Views:
Transcription
1 s STI 2,5 and STI 4 The asymmetrically arranged terminal foot makes the STI series stand out against standard terminal blocks. This foot makes it possible to route the neutral busbar past the terminal strip and to fix it in the insulated supports. The neutral busbar makes contact via the screwless neutral-disconnect slide by simple levering with a screwdriver. Considerable space savings in the control cabinet can be made by using the "mini-spring" spring cage system, without having to give up the familiar high quality features such as the generous labeling option, maximum connection space and the flexible plug-in bridge system. Assembly In order to achieve a reliable contact between the disconnect slide and the neutral busbar, the AB-STI supports must be mounted at the beginning and end of each terminal strip or, in the case of longer terminal strips, approx. every 20 cm. Headquarters: Phoenix Contact GmbH & Co. Flachsmarktstraße Blomberg Germany Phone +49-(0) Fax +49-(0)
2 STI 2,5 IEC Spring cage installation terminal block, for mounting on 3 gray terminal width 5.2 blue terminal width 5.2 STI 2, STI 2,5 BU () End cover gray D-STI 2, Cross section range: 0.2 mm 2 white mm 2 gray for cross connections in the 3-pos. ISH 2,5/0, ISH 2,5/0, ISH 2,5/ FBS 2-5 I max.: 24 A FBS A 3/ FBS A FBS A FBS A FBS A I MPS-RD RPS (7) Screwdriver, for (8) Zack marker sheet, flat, 20-section, for labeling the outer marker grooves white ZBFM 5 /WH:UNPRINTED (9) Zack strip, 0-section, for ZB 5: UNPRINTED Width / length /end cover width [mm] 5.2 / 59.5 / 2.2 Maximum load current / cross section [A] / [mm 2 ] 32 / 4 Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] 0.5 Internal cylindrical gauge (IEC ) A 3 PHOENIX CONTACT page 2 of 7
3 Ground Terminal Block STI 2,5-PE (IEC) rigid flexible [mm 2 ] solid stranded AWG IEC The current carrying capacity of the mounting rails should be observed. Spring cage ground terminal block, for mounting on 3 green-yellow terminal width 5.2 STI 2,5-PE () End cover gray D-STI 2, Cross section range: 0.2 mm 2 white mm 2 gray ISH 2,5/0, ISH 2,5/0, ISH 2,5/ (3) Screwdriver, for (4) Zack marker sheet, flat, 20-section, for labeling the outer marker grooves white ZBFM 5 /WH:UNPRINTED (5) Zack strip, 0-section, for ZB 5: UNPRINTED Width / length /end cover width [mm] 5.2 / 59.5 / 2.2 Maximum load current / cross section [A] / [mm 2 ] Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] 0.5 Internal cylindrical gauge (IEC ) A 3 PHOENIX CONTACT page 3 of 7
4 STN 2,5 IEC Spring cage neutral disconnect terminal block, for mounting on 3 blue terminal width 5.2 STN 2, () End cover gray D-STI 2, Cross section range: 0.2 mm 2 white mm 2 gray for cross connections in the 3-pos. (7) Neutral busbar, 3 x 0 mm, m long, copper, tin-plated ISH 2,5/0, ISH 2,5/0, ISH 2,5/ FBS 2-5 I max.: 24 A FBS A 3/ FBS A FBS A FBS A FBS A I MPS-RD RPS NLS-CU 3/ (8) Support, blue insulating material, for mounting the neutral busbar AB-STI (9) Screwdriver, for (0) Zack marker sheet, flat, 20-section, for labeling the outer marker grooves white ZBFM 5 /WH:UNPRINTED () Zack strip, 0-section, for ZB 5: UNPRINTED Width / length /end cover width [mm] 5.2 / 59.5 / 2.2 Maximum load current / cross section [A] / [mm 2 ] 32 / 4 Current carrying capacity of the neutal busbar [A] 40 Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] 0.5 Internal cylindrical gauge (IEC ) A 3 PHOENIX CONTACT page 4 of 7
5 STI 4 IEC Spring cage installation terminal block, for mounting on 3 gray terminal width 6.2 blue terminal width 6.2 STI STI 4 BU () End cover gray D-STI Cross section range: mm 2 gray for cross connections in the 3-pos. ISH 4/0, ISH 4/ FBS 2-6 I max.: 32 A FBS A FBS A FBS A FBS A FBS A I MPS-RD RPS (7) Screwdriver, for (8) Zack marker sheet, flat, 00-section, for labeling the outer marker grooves white ZBFM 6 /WH:UNPRINTED (9) Zack strip, 0-section, for ZB 6:UNPRINTED Width / length /end cover width [mm] 6.2 / 66 / 2.2 Maximum load current / cross section [A] / [mm 2 ] 4 / 6 Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] Internal cylindrical gauge (IEC ) A 4 PHOENIX CONTACT page 5 of 7
6 Ground Terminal Block STI 4-PE (IEC) rigid flexible [mm 2 ] solid stranded AWG IEC The current carrying capacity of the mounting rails should be observed. Spring cage ground terminal block, for mounting on 3 green-yellow terminal width 6.2 STI 4-PE () End cover gray D-STI Cross section range: mm 2 gray ISH 4/0, ISH 4/ (3) Screwdriver, for (4) Zack marker sheet, flat, 00-section, for labeling the outer marker grooves white ZBFM 6 /WH:UNPRINTED (5) Zack strip, 0-section, for ZB 6:UNPRINTED Width / length /end cover width [mm] 6.2 / 66 / 2.2 Maximum load current / cross section [A] / [mm 2 ] Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] Internal cylindrical gauge (IEC ) A 4 PHOENIX CONTACT page 6 of 7
7 STN 4 IEC Spring cage neutral disconnect terminal block, for mounting on 3 blue terminal width 6.2 STN () End cover gray D-STI Cross section range: mm 2 gray for cross connections in the 3-pos. ISH 4/0, ISH 4/ FBS 2-6 I max.: 32 A FBS A FBS A FBS A FBS A FBS A I MPS-RD RPS (7) Neutral busbar, 3 x 0 mm, m long, NLS-CU 3/ copper, tin-plated (8) Support, blue insulating material, for mounting the neutral busbar AB-STI (9) Screwdriver, for (0) Zack marker sheet, flat, 00-section, for labeling the outer marker grooves white ZBFM 6 /WH:UNPRINTED () Zack strip, 0-section, for ZB 6:UNPRINTED Width / length /end cover width [mm] 6.2 / 66 / 2.2 Maximum load current / cross section [A] / [mm 2 ] 36 / 6 Current carrying capacity of the neutral busbar [A] 40 Stranded with ferrule with plastic sleeve [mm 2 ] Stranded with ferrule without plastic sleeve [mm 2 ] Stranded with TWIN ferrule with plastic sleeve [mm 2 ] Internal cylindrical gauge (IEC ) A 4 PHOENIX CONTACT TNR: PHOENIX CONTACT page 7 of 7
Spring Cage Feed-Through Terminal Blocks ST
Spring Cage Feed-Through Terminal Blocks ST The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without
More informationPC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278
Extract from the online catalog PC 4/ 5-STF-7,62 Order No.: 1828278 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
More informationPC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920
Extract from the online catalog PC 4/ 4-ST-7,62 Order No.: 1804920 The figure shows a 5-pos. version of the product Plug component, nominal current:, rated voltage: 400 V, pitch: 7.62 mm, no. of positions:
More informationPC 4/ 2-ST-7,62. Extract from the online catalog. Order No.: 1804904
Extract from the online catalog PC 4/ 2-ST-7,62 Order No.: 1804904 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
More informationFeed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationMKDSN 1,5/ 3-5,08. Extract from the online catalog. Order No.: 1729131
Extract from the online catalog MKDSN 1,5/ 3-5,08 Order No.: 1729131 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,
More informationThe range of rail-mounted terminal blocks. for a perfect electrical installation.
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationPCB TERMINAL BLOCKS. Product Overview
PCB TERMINAL BLOCKS Product Overview AT A GLANCE: THE ENTIRE RANGE Variants: Pin pacing: Terminal blocks, terminal strips (double-, triple-, quadruple-deck terminal strips), disconnect terminal blocks
More informationGMKDS 3/ 3-7,62. Extract from the online catalog. Order No.: 1731734
Extract from the online catalog GMKDS 3/ 3-7,62 Order No.: 1731734 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 500 V, Pitch: 7.62 mm, Number of positions:
More informationFeed-through terminal blocks for high-current applications
596 PHOENIX CONTACT With the feed-through terminal blocks, you can freely select the connection technology. Choose between traditional screw connection, robust bolt connection, and convenient push-in connection
More informationDEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
More informationThe Rail-Mounted Terminal Block System
The Rail-Mounted Terminal Block System 2 The Industry s Largest Portfolio for Industrial, Building and Transportation Applications Industry s widest range of conductor sizes: 0.14 95 mm 2 (AWG 4/0 24)
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationMINI MCR-SL-R-UI(-SP)
Resistance/potiposition transducer INTERFACE Data Sheet 0807_en_05 Description PHOENIX CONTACT - 0/008 Features The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6. mm and converts
More informationEMC Engineering Guidelines For Automation Systems PS 4 PS 416 04/97 AWB 27-1287-GB
EMC Engineering Guidelines For Automation Systems PS 4 PS 416 1st edition 04/97 Moeller GmbH, Bonn Author: Werner Albrecht Editors: Klaus Krüger, Thomas Kracht Translator: Chris Baker, Terence Osborn Contents
More informationProduct and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.
Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an
More informationProduct and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
More informationUser s Manual. BNC Mini-High Res, 75 Ohm Termination Kit Connector Installation Guide (60-073-01)
User s Manual BNC Mini-High Res, 75 Ohm Termination Kit Connector Installation Guide (60-073-01) BNC Termination Kit Instructions This document is a compilation of Extron s instructions, together with
More informationPC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807
Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,
More informationZS10 Screw Clamp Terminal Block
Technical Datasheet 1SNK 161 004 D0201 ZS10 Screw Clamp Terminal Block Feed-through Catalogue Page 1SNK 161 004 S0201 10 mm² 6 AWG 8 mm 0.315 in Spacing Features and Benefits 53 2.09" Save space by connecting
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationBlock width on rail (mm) Standard block* is shown on blue background
How To Read Terminal Block Specifications How To Read Carton Labels Rated wire size (mm ) Mounting on multiple rail Spacing on rail Spacing 6 mm + 0,05 (.3") M /6 Block width on rail (mm) Standard block*
More informationPHOENIX CONTACT - 2012-12-14. Features
Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed
More informationE T K A 14:36 18.02.20100 970-00. Year. Illustration. Model. Seite: 001. et_bt1.frm. Pos Part Number Name Remarks Qty Model.
0 7 70-00 4:36 8.02.2000 connector housing pin 05 05 37 diode connector 2 3 4 5 6 2 05 05 37 D diode connector 7 8 0 2 3 4 5 6 7 8 20 2 22 23 24 25 26 27 28 2 30 3 32 33 34 3 357 07 7 B terminal pin housing
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationPower Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
More informationZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
More informationPowermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
More informationABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011
Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are
More informationZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket
Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationZS25 Screw Clamp Terminal Blocks Feed-through
Technical Datasheet SNK668D0 Catalogue Page SNK678S0 ZS Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to mm² AWG in just mm 0.47 in spacing. SNK68V004 SNK004F0000 D CAD
More information48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
More information49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
More informationOperating instructions Diffuse reflection sensor. OJ50xx 701396 / 01 07 / 2004
Operating instructions Diffuse reflection sensor OJ50xx 7096 / 0 07 / 004 Contents Preliminary note. Symbols used Function and features Installation. Installation of the supplied mounting fixture 4 4 Electrical
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More informationZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
More informationVARIOSUB RJ45/IP20 Plug Connectors
VARIOSUB RJ4/IP0 Plug Connectors VARIOSUB-RJ4/IP0 was developed for using RJ4 plug connectors in harsh industrial environments. With it, devices for Industrial Ethernet can also utilize the standard plug
More informationKAM 25-32 A Lighting Busbar System KAP 40-63 A Plug-in Busbar Distribution System
2-32 A Lighting Busbar System 4-63 A Plug-in Busbar Distribution System / E-LINE KX Compact Busbar Distribution System 63...63 A E-LINE KB Compact Busbar Distribution System 8...63 A E-LINE KO Plug-in
More informationCables and Accessories Selection Guide
Cables and Accessories Selection Guide From data centers to robotics to patient monitoring equipment, we re committed to enabling the next generation of faster, smaller and smarter design. 3M offers an
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationMaking Wiring Easier Push-in Terminal Blocks for Modular Machine Designs
Making Wiring Easier Push-in Terminal Blocks for Modular Machine Designs By Gordon Busch Product Marketing Industrial Connection Technology Phoenix Contact GmbH & Co. KG Blomberg, Germany Executive Summary
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationSMD Terminal Blocks with Push-Buttons
SMD Terminal Blocks with Push-Buttons SMD Terminal Blocks Small is Big WAGO s new SMD Terminal Blocks provide push-button termination for conductors 0. 0.75 mm/awg 4 18 (060 Series) and 0.5 1.5 mm/awg
More informationVoltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationSTEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
More informationNEW RANGE OF CABINETS DRIVIATM. Innovation at your service. THE GLOBAL SPECIALIST in electrical and digital building infrastructures
NEW RANGE OF CABINETS DRIVIATM Innovation at your service THE GLOBAL SPECIALIST in electrical and digital building infrastructures Drivia true innovation The new electrical panel for the residential and
More informationHSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
More informationThree-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
More informationBRÖCKSKES D-VIERSEN PV1-F 4,0 mm BRÖCKSKES D-VIERSEN PV1-F 4,0 mm d d 2 2 C VDE-REG.-Nr. 8292 10/2009
d BRÖCKSKES BRÖCKSKES D-VIERSEN D-VIERSEN PV1-F PV1-F 4,0 mm 4,0 2 mm VDE-REG.-Nr. 2 C 8292 10/2009 s - THE COMPANY DIN EN ISO 9001 More than 60 years of experience in temperature measurement and control
More informationFASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
More informationFestoon 715 P PUR cable for flexible application in festoon systems
CABLES FOR CRANE AND CONVEYOR APPLICATIONS Festoon 715 P PUR cable for flexible application in festoon systems S AB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C Marking for Festoon 715 P 07150162:
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationHARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
More informationModular Terminal Blocks
Modular Terminal Blocks Micro Terminal Blocks These Micro-Terminal blocks feature compact construction (.mm wide), are bridgeable in the center, have matching ground blocks and mount on NS 1 rails. MT1.
More informationFakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
More informationType: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
More informationTerminals, W-Series. Contents. Terminals, W-Series. Terminals, W-Series. Terminals, TS 15. Stud terminals. Accessories. Terminals, SAK-Series E.
Contents Overview W-Series.2 Feed-through terminals.4 Double level terminals.14 Modular P terminals.19 Modular disconnect terminals.29 Fuse terminals.5 Installation terminals.40 Disconnect test terminals.4
More informationSchneider Automation Modbus Plus Network Installing Clustered Node Devices 31000939 00 Version 2.0
Schneider Automation Modbus Plus Network Installing Clustered Node Devices 3000939 00 Version.0 Modbus Plus devices must be installed as specified in a network layout plan, showing each device s mounting
More informationAssembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
More informationPower Supply, Primary Switch Mode, Narrow Design MINI-PS-100-240AC/2x15DC/1
Power Supply, Primary Switch Mode, Narrow Design -PS-100-240AC/2x15DC/1 POWER provides: Extra narrow widths of 22.5 and 45 mm (0.886 and 1.772 in.) Global use due to a wide range input A high level of
More informationInstallation. Smart-UPS VT MGE Galaxy 3500. Maintenance Bypass Panel. 10-40 kva 400 V
Installation Smart-UPS VT MGE Galaxy 3500 Maintenance Bypass Panel 10-40 kva 400 V Contents Safety.................................................. 1 Save these instructions...................................
More informationStandard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
More informationType: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
More information34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
More informationIntersection Preassembled 19-inch Rack
Intersection Preassembled 19-inch Rack The intersection preassembled 19-inch rack comes fully assembled, wired and ready to be installed in a server rack. The rack provides communications, power conversion
More information1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
More informationMounting Plate / Screwdriver. Alignment Stickers Screws / Desiccant Bag / Double-sided Tape / Rubber Seal Plug / Rubber Washer
5000020G Warning Before Installation English Power off the Network Camera as soon as smoke or unusual odors are detected. Do not place the Network Camera on unsteady surfaces. Do not insert sharp or tiny
More informationPanduit 28 AWG Patch Cords Installation Guideline
Panduit 28 AWG Installation Guideline Introduction Panduit is a leading supplier of Structured Cabling Systems and Unified Physical Infrastructure. Panduit solutions enable the physical infrastructure
More information1 Introduction - Advice... 2. 2 Conductor Rails... 3. 3 Track Coupler... 4. 4 Power feeds... 5. 5 Air Gap Insulation Section... 6
Contents 1 Introduction - Advice... 2 2 Conductor Rails... 3 3 Track Coupler... 4 4 Power feeds... 5 5 Air Gap Insulation Section... 6 6 Expansion joints... 7 7 Anchor Caps... 8 8 End Caps (Distance between
More informationJumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar
BJ Jumper bar Use the BJ jumper bar to connect consecutive and nonconsecutive terminal blocks with the same spacing. Two types of jumper bars are available : an assembled unit and a nonassembled unit.
More informationThermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More information2013 Wireless Video Intercom INSTALLATION GUIDE
2013 Wireless Video Intercom INSTALLATION GUIDE INDEX System configuration and wiring VL-SWD501 System Component.. 4 VL-SWD501EX wiring schematic diagram VL-SWD501EX wiring type and length... 5.... 6 Door
More informationElectronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
More informationPower Supply, Primary Switch Mode, Narrow Design MINI-PS-100-240AC/24DC/2
Power Supply, Primary Switch Mode, Narrow Design -PS-100-240AC/24/2 POWER provides: Extra narrow widths of 22.5 and 45 mm (0.886 and 1.772 in.) Global use due to a wide range input A high level of operational
More informationThree-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41
Data sheet Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 The three-phase monitoring relays CM-PSS.x1 monitor the phase parameters phase sequence, phase failure as well as over- and undervoltage.
More informationNA1FC7T. Fuse holder terminal blocks
NAFC7T 00 Fuse holder terminal blocks T0077 009 Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.SF... Spacing 8 mm (.5") M 4/8.SFT Standard
More informationCOAX Cables Radio Frequency Cables
COAX Cables Radio Frequency Cables Contents Page Table of contents Pictographs General information Introduction Types and abbreviations Temparature range Construction Characteristics Special constructions
More informationSMD TERMINAL BLOCKS. Small is Big!
SMD TERMINAL BLOCKS Small is Big! SMD TERMINAL BLOCKS A compact and low-profile PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More information48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More informationElectronic housing BC for distributor boards
Electronic housing BC for distributor boards The requirements of modern building automation grow constantly and change with regard to comfort, control, intelligent linking of systems and their communication
More informationFLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS
Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL
More informationChemical resistance Accidental
Industrial flexible cable, insulation and outer sheath in elastomer Description Application TITANEX flexible cable is intended for installations with moving equipment, electric appliances and for building
More informationI NTERFACE CABLE ADAPTER MODULE
I NTERFACE CABLE ADAPTER MODULE The Interface Cable Adapter Module (ICAM) has two basic uses. First, it enables you to run shielded cable between the industrial sensor interface module (SIM) and the weather
More informationTX OPEN RS232/485 module
s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationUncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M
Uncompromising safety and comfort The next generation of miniature circuit breakers MCB S 200/S 200 M The details make the difference MCB S 200/S 200 M A range designed to ensure efficiency and protection
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationPrinted carriers and labels
Printed carriers and labels LASER printed S H Carriers LFL 2H Material: Temperature range: PET Label thickness: 195 µm Standard colour: -40 C to +125 C white - yellow LASER Specification: - printed on
More informationABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More informationMCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description
Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V
More informationLIEBERT VNSA Installation Sheet
LIEBERT VNSA Installation Sheet Description The Liebert vnsa network switch is designed for connecting multiple Ethernet-ready devices and comes in various models. The unit may have: A Liebert icom display
More informationType: DILM32 10(24V50HZ) Article No.: 277247
Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,
More informationSEZ220. Signal Converter. Synco 200. With preprogrammed standard applications Freely programmable Menu-driven operation. Use
s 5 146 Synco 200 Signal Converter SEZ220 With preprogrammed standard applications Freely programmable enu-driven operation Use The signal converter is for use in HVAC plant to provide minimum / maximum
More information