Modular Terminal Blocks

Transcription

1 Modular Terminal Blocks Micro Terminal Blocks These Micro-Terminal blocks feature compact construction (.mm wide), are bridgeable in the center, have matching ground blocks and mount on NS 1 rails. MT1. not shown) is a conductor block (1-input, 1-output), MT1.-TWIN has 1-input, outputs and MT 1 QUATTRO provides -inputs and outputs. MTTB1. (not shown) is a double level block with two independently bridgeable thru levels. It features universal mounting for both NS 1 and NS rails. Color: gray (blue available); ground blocks are yellow/green. Connections: clamping screws Flammability Rating: ULVO. Approvals: UL recognized, CSA certified. Accessories sold separately. Note: ground blocks include white labels w/ground symbols. MT-TWAIN and MT-TWIN-PE MT-QUATTRO and MT-QUATTRO-PE Mfr s Type Description AWG MT 1. MT 1.-TWIN MT 1.-QUATTRO MTTB 1. MT 1.-PE MT 1. TWIN-PE MT 1.-QUATTRO-PE Micro Term. Block, -Conductor, Gray Micro Term. Block, -Conductor, Gray Micro Term. Block, -Conductor, Gray Dbl.Lvl. Micro-Term. -Conductor, Gray Micro Ground Term. Block for MT 1. Micro Ground Term. Block for MT 1.-TWIN Micro Ground Term. Block for MT 1.-QUATTRO - Rating Dimensions V A W L H (NS :./NS 1) -/. -/0 -/0 1/1 -. -/0 -/0 Accessories for Micro Terminal / Blocks Mfr s Type Description * D-MT 1. D-MT 1.-TWIN D-MT 1.QUATTRO D-MTTB 1. FBRN -N DG-MTTB 1. DP-MTTP 1. ZBFM End Cover, Gray, 1mm wide Fixed Bridge, pos., Breakable Spacer Cover, Gray, mm Thick Spacer Plate, Gray, mm Thick Marker Strip (order data, see Accessories for Terminal Blocks ) * Spacer cover and plate compensate for level offset if standard terminal blocks are to be aligned. For Terminal Blocks MT 1. MT 1.-TWIN MT 1.QUATTRO MTTB 1. MT 1., MT 1.-TWIN, MT 1.QUATTRO, MTTB 1. MTTB 1. MTTB 1. Fits all Terminal Blocks above MBK /E-Z MBK /E MBK /E MBKKB. Mini Terminal Blocks Mfr s Type Description AWG MBK /E-Z MBK /E MBK /E MBKKB Mini Terminal Block, -Conductor, Gray Mini Terminal Block, -Conductor, Gray Mini Terminal Block, Snap Mnt., -Cond.,Gray Mini Terminal Block, Dbl. Lvl., -Cond., Gray These Mini-Terminal blocks range in width from.mm to.mm and are bridgeable for simple and reliable power distribution. They mount on NS 1 DIN rails except MBKKB. which features universal mounting for both NS 1 and NS DIN Rails. MBK/E-Z and MBK/E are single level blocks with 1-input and 1 output. Type MBK/E is also single level (without label groove) and snap-fits on to the mounting rail. Type MBKKB. is a double level with two bridgeable inputs and outputs. Color: gray, but all except MBK/E are available with blue housing. Flammability Rating: ULV. Connections: Screw Clamps. Approvals: UL Recognizable, CSA Certified Rating Dimensions V A W L Accessories for Mini Terminal Blocks H (NS :./NS :1NS/1) -/-/ -/-/ -/-/.//. Mfr s Type Description * D-MBK/E D-MBK /E D-MBKKB. FBRI -N FBI - FBI - FBRNI -N EBL - EB - EB - EB - DP-MBKKB. ZB ZB End Cover, Gray Fixed Bridge, -Pos., Breakable Insertion Bridge, -Pos., Breakable Spacer plate compensates for level offset if standard blocks are to be aligned. 1mm wide 1.mm wide.mm wide Spacer plate, Gray,.mm Thick Marker Strip (Order data, See Accessories for terminal Blocks.) MBK /E-Z, MBK /E MBK /E MBLKB. MBK /E-Z MBK /E MBK /E MBKKB. MBK /E-Z MBK /E MBK /E MBKKB. MBKK. MBK /E-Z, MBKKB. MBK /E For Terminal Blocks

2 Modular Terminal Blocks Universal Terminal Blocks UK 1.N UK.N UK N UK N UK N UK N UK N UK N UKH 0 UKH UKH UKH0 Universal terminal blocks for many applications can be wired fast and reliably, can be bridged and can be labeled on both sides. these blocks have a universal base which snaps into NS and NS ( or ) mounting rails. UKH series high current terminal blocks are enclosed and require no end covers. Color: Gray (Blue available). Connections: Screw Clamps. Flammability Rating: ULVO (ULV for UK.N, UK N, UK N). Approvals: UL Recognized, CSA Certified. European approvals available upon request. A full range of accessories are available (Ordered Separately). Mfr s Type Description AWG UK 1.N UK.N UK N UKN UK N UKN UKN UK UKH 0 UKH UKH UKH Universal Terminal Block, Gray Universal High Current Terminal Block, Gray Accessories Table Rating V A W L Dimensions H (NS :./NS 1) /./ /./ /./ /./ /./ /./ /1./ /./ /./1. /./. /./1 /./1. The accessories below are the most common. A wider range f accessories can be found on the page entitled Accessories for Terminal Blocks which follows this section. Fixed Bridge: a -position breakable screw strip w/insulated collars for voltage bridging in the Terminal center. Insertion Bridge: a, or -position fully insulated, breakable strip for voltage bridging at the connection points. Notes: All bridges have a load capacity of at least 0% of nominal current. Marker Strips: Snap-in Labels (Several variations). Mfr s Type Description * D-UK. D-UK / D-DU FBRI -N FBRI -N FBI - FBI - FBI - FBI -1 FBI -1 FBI -1 FBI -0 FBI -0 EBL - EB - EB - EB - EB -1 EB -1 EB - UKH EB -/UKH EB -1/UKH EB -1/UKH EB -/UKH EB -/UKH ZB ZB ZB ZB ZB End Cover, Gray Accessories for Micro Terminal / Blocks Fixed Bridge, -Pos, Breakable Fixed Bridge Insertion Bridge, -Pos., Breakable Insertion Bridge, Snap Fitted 1.mm wide 1.mm wide 1.mm wide -Pos. -Pos. -Pos. -Pos. -Pos. -Pos. -Pos. -Pos. -Pos. -Pos. Marker Strips (Order data, See Accessories for Terminal Blocks ) For Terminal Blocks UK 1.N, UK.N UK N, UKN, UK N, UK N UK N UK 1. N UK., UK N UKN UK N UK N UKN UK UK UKH 0 UKH 0 UK.N, UK N UK N UK N UK UK N UK UKH UKH UKH UKH UKH 0 UKH 0 UKH1.N UK.N, UK N UK N UK N UK, UK N, UK, UKH 0, UKH, UKH, UKH 0

3 Modular Terminal Blocks Universal Ground Terminal Blocks USLKG 1.N USLKG.N USLKG USLKG USLKG N USLKGN These Terminal blocks use the mounting rails as a ground (PE) busbar which makes it possible to position directly next to the conductor terminal blocks. Designed with a universal base which adapts to both NS and NS ( or ) mounting rails. Included with each block are white labels printed w/ground symbols. Colors: Green/Yellow. Connections: Screw clamps. Flammability Rating: UL VO (ULV for US LKG 0 and USLKG ). Approvals: shown above. European approvals available. USLKG N USLKG Accessories: ZB Series marker strips (order data, see Accessories for Terminal Blocks). Mfr s Type Description USLKG 1.N USLKG.N USLKG USLKG USLKG N USLKG N USLKG USLKG USLKG 0 USLKG Universal Ground Terminal Blocks *Current carrying capacity is determined by type of rail. AWG Rating V A* W L Dimensions H (NS :./NS :1/NS ) /./ /./ /./ /./ /./ /./ /1./ /./ -/./1. -//. UNIVERSAL DOUBLE LEVEL TERMINAL BLOCKS The UKK Double level Terminal blocks are available in two versions. the UKKB Types have bridge shafts in both levels and the UKK types can only be bridged in the upper level. type UKK -PE ground Terminal block is available for connecting ground conductors. These blocks have a universal base which which adapts to both NS and NS mounting rails. Color: Gray (blue available). Ground (PE) block is green/yellow. Connections: Screw clamps. Flammability UKK UKKB UKK UKKB UKK -PE European approvals available upon request. A full range of accessories are available (Order separately). USLKG 0 USLKG Rating: ULV0 (ULV for UKK -PE). Approvals: UL recognized, CSA Certified. Mfr s Type Description UKK UKKB UKK UKKB UKK -PE Universal Double Level Terminal Block Universal Double Level Ground Term Block AWG -1 Accessory Table Rating V A* W L Dimensions H (NS :./NS :1/NS ) /./ 1 Mfr s Type FIG Description * D-UKK / D-UKKB / DG-UKK / DG-UKK / DP-UKK / DP-UKKB / FBRNI -N FBI - EBL - EB - ZB ZB The accessories below are the two most common. A wider range of accessories are available (See Accessories for Terminal Blocks ). Space covers and plates compensate for level offset if standard Terminal blocks are aligned. Accessories for Micro Terminal / Blocks End Cover, gray,.mm wide End Cover, gray,.mm wide Spacer Cover, gray,.mm thick Spacer Cover, gray,.mm thick Spacer Plate, gray,..mm thick Spacer Plate, gray,..mm thick Fixed Bridge, -pos., breakable Fixed Bridge, -pos., breakable Insertion Bridge, -pos., Breakable Insertion Bridge, -pos., Breakable Marker Strips (Order, see Acces. for Term. Blocks ) UKK, UKK UKKB, UKKB UKK, UKK UKKB, UKKB UKK, UKK UKKB, UKKB UKK, UKKB UKK, UKKB UKK, UKKB UK, UKKB UKK, UKKB UK, UKKB, UKK -PE For Terminal Blocks

4 Modular Terminal Blocks and -level Terminal Blocks DIK 1. DOK 1. VIOK 1. VIOK 1.-D VIOK 1.-D/PE DLK.-PE The DIK 1. -level sensor input block distributes a signal line (top level) as well as - and + potentials (middle and bottom levels) via insertion bridges. DIKD 1. is the same, except with feed -through contacts. DOK 1. is a -level actuator output block which accommodates a signal line (top level) a bridged negative potential (middle level) and a grounding busbar (bottom level). VIOK 1. is a -level combination of the DIK/DOK blocks where only one block is needed for sensors and actuators. This block distributes a signal line (top level), - and + supplies (middle levels) and grounding busbar (bottom level). VIOK 1.-D has a feed-through and busbar levels. VIOK 1.-D/PE is a -conductor feed-through block. The -conductor DLK.-PE and DLKB.-PE blocks are designed for -phase current. The DLKB is bridgeable via insertion bridges (bottom and middle levels) and fixed bridges (top level). Color: gray. Connections: screws. Flammability rating: ULV (ULV0 for DLK/DLKB blocks) Approvals: UL recognized CSA certified. Call for European approvals. Mounting : for NS ( ) rails only. A full range of accessories are available. Mfr s Type Description DIK 1. DIKD 1. DOK 1. VIOK 1. VIOK 1.-D VIOK 1.-D/PE DLK.-PE DLKB.-PE lvl Sensor terminal block as above, but w/ through contacts -lvl. Actuator terminal block -lvl. Sensor/Actuator term. Block as above, but w/ thru & busbar levels as above but w/ feed thru levels -lvl., - conductor terminal blocks as above, but bridgeable one side *If EB insertion bridge is used, the nominal voltage is reduced to 0V. AWG -1 Rating V A* W L * 00 00* Accessory Table for and -Level Terminal Blocks Accessories for Micro Terminal / Blocks Mfr s Type Description FBI - EB 0-DIK BU EB 0-DIK RD EB -DIK GY EB -DIK RD EB -DIK BU ZB Fixed Bridge, -pos., breakable Insertion Bridge, 0-pos., breakable, blue, Insertion Bridge, 0-pos., breakable, red Insertion Bridge, -pos., breakable, gray Insertion Bridge, -pos., breakable, red Insertion Bridge, -pos., breakable, blue Marker strips (order data, see Accessories for Terminal Blocks ) Special Terminal Blocks/Special Connections Dimensions H (NS :./NS :1)./././ 0/. 0/. 0/. 0/. 0/. For Terminal Blocks Fits all of the Term. Blocks above Fits all except DLK. PE Fits all except DLK. PE Fits all except DIK 1., DIKD 1., DLK.-PE Fits all except DIK 1., DIKD 1., DLK.-PE Fits all except DIK 1., DIKD 1., DLK.-PE Fits all of the Term. Blocks above The UK Twin Terminal blocks solve the problem of power distribution. They have two independent conductor connections on the load side, while on the input side they are the same shape as feed-thru universal terminal blocks UK N and UK N. The UDK versions feature power distribution using terminal points on each connection side, as well as two bridging points in the terminal center. Both versions include ground terminal blocks in green-yellow closed housings. Color: gray (blue available). Connections: screws. Flammability Rating: ULV. Mounting: Universal. Approvals: Call. Twin Conductor Terminal Block UKTWIN Double Terminal Blocks UDK Mfr s Type Description UK -TWIN UK -TWIN UK -TWIN-PE UK -TWIN-PE UDK UDK UDK -PE Twin Conductor Term Block Twin Conductor Term Block Twin Conductor Ground Term Block Twin Conductor Ground Term Block Double Term Block Double Term Block Double Ground Term Block AWG Rating V A W L Note: Ground Blocks include white labels with ground symbols. Accessory Table for and -Level Terminal Blocks Accessories for Micro Terminal / Blocks Mfr s Type Description D-UK -TWIN D-UDK FBRI -N FBI - EBL - EB - ZB ZB End Cover, Gray, mm wide End Cover, Gray, 1.mm wide Fixed Bridge, -pos., breakable Fixed Bridge, -pos., breakable Insertion Bridge, -pos., breakable Insertion Bridge, -pos., breakable Marker strip (order data, see Accessories for Terminal Blocks ) Dimensions H (NS :./NS:1/NS /./. For Terminal Blocks UK -TWIN, UK -TWIN UDK, UDK UK -TWIN, UDK UK -TWIN, UDK UK -TWIN, UDK UK -TWIN, UDK UK -TWIN, UK-TWIN-PE, UDK UK -TWIN, UK-TWIN-PE, UDK, UDK -PE

5 Modular Terminal Blocks Terminal Blocks for Fuse and Component Plugs MBK/E UK -TG UDK -TG UKK -TG These fuse or component terminal blocks are base terminal blocks which accept the fuse or component plugs listed below. Because these base blocks have the same shape and dimensions as standard feed-through blocks MBK, UKN, UDK and UKKB, they can be combined with the standard blocks on one rail to perform various tasks. Color: Gray. Connections: Screw clamps. Flammability Rating: ULV. European approvals available. Accessories sold separately. Mfr s Type Description AWG Rating Dimensions V A* W L H(NS:./NS:1/NS /NS1) MBK /E-TG UK -TG UDK -TG UKK -TG Base Terminal Block, Gray * * /-/-/ /.//- /.//-.///- Current & Voltage determined by component & fuse plugs *Upper level (lower level 00v, A) ** For std block UK N Mfr s Type Description ST-SI-UK ST-SILED -UK ST-SILA 0-UK ST-BE ST-BE-LA ST-BE-LA 0 ST-1N00 ST-BE-VIERPOL ST-B0 C Accessory Table Accessories for Micro Terminal / Blocks Mfr s Type Description * D-MBK /E-T P-UK / D-UDK RELG FBI - EB - ZB *UL (CSA A) ST-SI-UK End Cover, Gray 1mm wide 1.mm wide 1.mm wide Fixed Bridge, -pos., breakable Insertion Bridge, -pos., breakable Marker Strip (order data, see "Accessories for Terminal blocks") ST-BE Fused and Component Plugs Fuse plug for x0 mm fuses,.mm high, color: black As above, except with v light indicator (1-0 v AC/DC) As above, except with 0v light indicator (1-0v AC/DC) Single component plug (for -position components), 1mm high, gray As above, except with V DC LED As above, except with 0v AC/DC LED As above, except with universal diode 1N00 Double component plug (for position components), 1mm high, gray As above, except with bridge rectifier B 0 C 0 For Terminal Blocks MBK /E-TG UK -TG UDK -TG UKK -TG Fits all base blocks UK -TG, UDK -TG, UKK -TG Rating A V *.*.* Several plug versions are available for use with the base terminal blocks described above. The ST-SI-UK fuse plugs accommodate x0 man fuse cartridges, and are available with or without a light indicator. The plug housing opens on one side to change the fuse. The ST-BE component plugs are available as single plugs for -position components and as double plugs for -position components with or without inserted components. The component itself is inserted and clamped at the top. The open design means that larger components can be used that protrude above the plug. All fuse and component plugs are coded to avoid polarity reversal. Color: Fuse plugs (black), component plugs (gray). Flammability Rating: fuse plugs (ULV), Component plugs (ULV0). Component Terminal Block This terminal block with integrated diode 1N00 (conducting direction from top to bottom) is an alternative to using component plugs. It is the same size and shape as universal double level block UKK. Color: gray. Connections: screw clamps. Flammability Rating: ULV. Mounting: Universal. Diode Reverse Voltage: 0 V; 1A max continuous current. Mfr s Type Description AWG Rating Dimensions V A W L H(NS:./NS:1/NS UKK -DIO/O-U Term Block w/1n 00 Diode, Gray /./ Accessories with diode from top to bottom Mfr s Type Description D-UKK / DG-UKK / DD-UKK / ZB End cover, gray,. mm wide Spacer Cover, compensates for level offset if standard blocks are to be aligned Spacer plate, compensates for level offset if standard blocks are to be aligned,.mm Th. Marker strip (order data, see "Accessories for terminal blocks")

6 Modular Terminal Blocks Side Link Disconnect Terminal Blocks These slide link Test disconnect blocks are used extensively in the utilities industry, URTK/S-BEN block has a sliding link which enables the end user to employ a disconnect at the full rated value of the terminal. the connection screws have a socket cavity to accommodate mm Test plugs and and -position short circuit plugs. the smaller URTL/SS block has the same features, but the connection screws are recessed with on opening which allows plugs to be inserted directly. Color: gray. mounting: Universal for plugs on either NS or NS DIN rails. Flammability rating: URTK/S-BEN (ULV0), URTK/SS (ULV). Mfr s Type Description URTK/S-BEN URTK/SS Slide Link Disconnect term. Block AWG Accessories Rating V A* W L URTL/S-BEN Dimensions H(NS:./NS:1/NS ).//. 0/./ URTK/SS Accessories for Micro Terminal / Blocks Mfr s Type Description * D-UTK/S-BEN D-URTK/SS FBRNI - N EB - S KSS- KSS - KSS- KSS - ZB ZB End Cover, Gray,.mm wide End Cover, Gray, 1mm wide Fixed Bridge, -Pos., Breakable Insertion Bridge, -Pos., Breakable Switch lock (prevents operation of slide link) -pos. Short Circuit Plug -pos. -pos. -pos. Marker Strip (order data, see Accessories for terminal Blocks ) URTK/S-BEN URTK/SS URTK/SS URTK/S-BEN URTK/S-BEN URTK/S-BEN URTK/S-BEN URTK/SS URTK/SS URTK/SS URTK/S-BEN For Terminal Blocks KNIFE DISCONNECT TERMINAL BLOCKS MTK-P/P UK -MTK-P/P UDK -MTK-P/P UKK -MTK-P/P Knife disconnect blocks permit rapid fault isolation and insertion under zero volt conditions. They feature space saving construction and high current carrying capacity. P/P types have test Socket Screws (to accommodate mm test Plugs) in lieu of standard screw connections. UDK-MTK-P/P has double connection points to accommodate several wires on each module. Color: Gray (knife disconnects orange). Flammability Rating: ULV. Mounting: Universal. Approvals: UL Recognized, CSA Certified. Mfr s Type Description MTK-P/P MTK MTKD-P/P MTKD UK -MTK-P/P UDK -MTK-P/P UKK -MTK-P/P UKK -MTKD-P/P Knife Disconnect Term.Block w/socket screws As above, except w/standard screws Feed-thru Block (w/o knife), w/socket screws As above, except w/standard screws Knife Disconnect Term. Block w/socket screws As above, w/double connections points Dbl. Lvl, knife Disconnect upper Lvl. socket screws Dbl. Lvl. Feed-thru (w/o knife), w/socket screws * Upper level (lower level A) NOTE: Types UK and UKK have enclosed houses AWG -1 Rating V A W L * 1* Dimensions H (NS:./NS:1/NS ) 1.// 1.// 1.// 1.//.//. /./ // // Accessories Mfr s Type Description D-MTK D-UDK FBI - EBL - EB - ATS-MTK ATP-UK -MTK ZB ZB End Cover, Gray 1mm wide End Cover, Gray, 1.mm wide Fixed Bridge, Pos., Breakable Insertion Bridge, -Pos., Breakable Insertion Bridge, -Pos., Breakable Partition Plate, for electrical separation of Terminal Groups Partition Plate, for electrical separation of Terminal Groups Marker Strips (order data, see Accessories for Terminal Blocks For Terminal Blocks MTK-P/P, MTK, MTKD-P/P, MTKD UDK -MTK-P/P UKK -MTK-P/P, UKK -MTKD-P/P MTK-P, MTK, MTKD-P/P, MTKD UK -MTK-P/P, UDK -MTK-P/P MTK-P/P, MTK, MTKD-P/P, MTKD UK -MTK-P/P MTK-P/P, MTK, MTKD-P/P, MTKD UK -MTK-P/P, UDK -MTK-P/P, UKK -MTK-P/P UKK -MTKD-P/P

7 CLIPLINE Modular Terminal Blocks Equipment Terminal Blocks These compact direct mounted terminal blocks are used primarily with network connections for electrical and electronic equipment and small terminal boxes. G blocks accommodate wires up to 1 AWG and G blocks are for wires up to AWG (stranded) and AWG (solid). The housing is made of shock proof ULV impact resistant plastic. The blocks interlock and are supplied with two screws each for mounting. Connection points can be labeled with optional marker pins which insert into notches in the top of each block. Color: Gray. G / G / G / G / G /1 G / G/ G/ G / G / *DIN VDE 00(00V IEC --1) G/ Equipment Term. Block Equipment Term. Block -pos. -pos. -pos. -pos. 1-pos. -pos. -pos. -pos. -pos. Accessories AW G R a t i n g V A 00 0* Dimensions L 0 1 Marker pins are available either in white/unprinted for labeling with a marker pen or white/printed with 1, or characters (must specify characters when ordering). W H Accessories for Micro Terminal / Blocks BN WH BNB WH:* BN-AS WH WS-G / WS-G / WS-G / B-STIFT *Specify marking when ordering. Marker pin, unprinted for labeling with a marker pen, white, area x mm As above, except printed with 1,, or characters, white, area x mm Group cover marker, unprinted, white, area: x0. mm Warning plate, completely covers terminal surface Marker pen for labeling unprinted markers. Smear-proof and waterproof. 1/N/PE Connecting Terminal Blocks For G / For G / For G / Neutral (N), ground (PE) or phase conductors (L) are often connected to central busbars and require clear marking of the terminal blocks to the corresponding circuit. The AKG connecting terminal blocks fulfill this requirement with their blue, green-yellow or black housings. They fit onto x mm busbars with a captive pressure plate and non-loosening screws. Three supports made of insulating material are available to hold the busbars: a single bar support and two offset double bar supports (one mm high, the other only. mm high). Flammability Rating: ULV. Approvals: ULRecognized, CSACertified (AKG only) call AK AKG BU AKG CNYE AKG BK AK AKG BU AKG GNYE AKG BK L/N/PE Connecting term block w/o insulating cap As above, except w/ blue insulating cap (for N) As above, except w/ green-yellow insulating cap (for PE) As above, except w/ black insulating cap (for L1,L,L) L/N/PE connecting term block w/o insulating cap As above, except w/ blue insulating cap (for N) As above, except w/ green-yellow insulating cap (for PE) As above, except w/black insulating cap (for L1,L,L) AW G 0- - A 1 Dimensions W L H* * Height above mounting surface. Accessories Accessories for Micro Terminal / Blocks NLS-CU / AB/SS AB /SS ABN /SS ZB ZB Neutral Busbar, x mm, length: 1m, copper tin-plated, A max. Support, single bar, insulated, w/retaining screw, for x mm or x mm busbars Support, offset double bar, insulated, for x mm or x mm busbars, mm high Support, offset double bar, insulated, for x mm or x mm busbars,. mm high Marker strip for AK series (order data, see Accessories for Terminal Blocks ). Marker strip for AK Series (order data, see Accessories for Terminal Blocks )

8 CLIPLINE Spring Cage Terminal Blocks A complementary option to screw terminal block technology is spring cage technology where a spring pulls the conductor tight against the current bar. The prestressed corrosion-proof copper alloy spring is opened using a screwdriver so the conductor can be inserted into the insertion space through an opening in the spring leg. The conductor is pulled against the current bar under spring force when the screwdriver is removed. ST Series Phoenix Contact announces the introduction of a new high density spring cage terminal block family (ST). The new mini spring design reduces the overall size of the terminal block without giving up any features. The STproduct has a flexible dual channel push-in jumper system, which can handle and chain bridging using,,,, or 0 position jumpers. There is a generous wire entrance which eliminates the need to use a larger termial block when ferrules are used. The ST block has large center marking for easy access and readability and end marking for labeling each termination point. The housings are made of unbreakable polyamide.. Color: gray (-PE models green-yellow), Connections: spring cage. Flammability Rating: ULV0. Mounting: EN00 (NS) rails. ST 1. ST 1.-PE ST. ST.-PE ST ST -PE ST ST -PE Spring Cage Feed Through Terminal Blocks AW G Spring cage feed-through terminal, gray Spring cage ground terminal block, gn/ye Spring cage feed-through terminal, gray Spring cage ground terminal block, gn/ye Spring cage feed-through terminal, gray Spring cage ground terminal block, gn/ye Spring cage feed-through terminal, gray Spring cage ground terminal block, gn/ye Feed-through blocks ST V A W L terminal R a t i n g Multi-conductor spring cage terminal blocks Dimensions H (NS:./NS:1)./././././././1./1 Spring cage double level terminal blocks Multi-Conductor Spring Cage Terminals Blocks AW G ST 1.-Twin ST 1.-Twin-PE ST.-Twin ST.-Twin-PE ST -Twin ST -Twin-PE ST 1.-Quattro ST 1.-Quattro-PE ST.-Quattro ST.-Quattro-PE ST -Quattro ST -Quattro-PE Three-conductor spring cage feed through terminal, gray Three-conductor spring cage ground terminal block, gn/ye Three-conductor spring cage feed through terminal, gray Three-conductor spring cage ground terminal block, gn/ye Three-conductor spring cage feed through terminal, gray Three-conductor spring cage ground terminal block, gn/ye Four-conductor spring cage feed through terminal, gray Four-conductor spring cage ground terminal block, gn/ye Four-conductor spring cage feed through terminal, gray Four-conductor spring cage ground terminal block, gn/ye Four-conductor spring cage feed through terminal, gray Four-conductor spring cage ground terminal block, gn/ye R a t i n g V A W L Dimensions H (NS:./NS:1)././././././././././././ Double Level Spring Cage Terminals Blocks AW G STTB 1. STTB. STTB MZFFKB Double level spring cage feed through terminal, gray Double level spring cage feed through terminal, gray Double level spring cage feed through terminal, gray Mini double level spring cage feed through terminal, gray V A W L R a t i n g... Dimensions H (NS:./NS:1)./././ / Accessories for ST Series Spring Cage Terminal Blocks are on the next page

9 CLIPLINE Spring Cage Terminal Blocks Accessories for ST Series Spring Cage Terminal Blocks (ST Series terminal blocks are on the previous page) For Terminal Blocks A m p e r a g e D-ST. D-ST D-ST D-ST.-Twin D-ST -Twin D-ST.-Quattro D-ST -Quattro D-STTB. D-STTB FBS - FBS - FBS - FBS - FBS - FBS 0- FBS - FBS - FBS - FBS - FBS - FBS 0- FBS - FBS - FBS - FBS - FBS - FBS 0- FBS - FBS - FBS - FBS - FBS - ATP-ST ATP-Twin ATP-Quattro ATP-STTB ZBFM ZBFM ZBFM ZBFM ZB ZB ZB * * * * ** * * End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide End cover gray, mm wide Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge 0 position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge 0 position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge 0 position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Plug-in bridge position Partition plate for seperation of groups mm thick Partition plate for seperation of groups mm thick Partition plate for seperation of groups mm thick Partition plate for seperation of groups mm thick Marker sheets, flat for labeling outer grooves Marker sheets, flat for labeling outer grooves Marker sheets, flat for labeling outer grooves Marker sheets, flat for labeling outer grooves Marker strip for center of terminal and plug in bridges Marker strip for center of terminal and plug in bridges Marker strip for center of terminal and plug in bridges ST. ST ST ST.-Twin ST -Twin ST.-Quattro ST-Quattro STTB. STTB ST1. ST1. ST1. ST 1. ST 1. ST 1. ST. ST. ST. ST. ST. ST. ST ST ST ST ST ST ST ST ST ST ST ST 1.,.,, ST 1.,., Twin ST 1.,., Quattro ST1.,., STTB ST 1. all series ST. all series ST all series ST ST 1. all series ST. all series ST Call * Order data, see Accessories for Terminal Blocks

10 CLIPLINE Spring Cage Terminal Blocks Spring Cage Knife Disconnect Terminal Blocks These feed-through knife disconnect terminal blocks with. mm test plugs permit rapid fault isolation and inspection of work under zero volt conditions. Models ZFK.-MT and ZFDK.-MT (not shown) are single level blocks with one and two disconnectable feed-through circuits respectively. Models ZFKK.-MT (not shown) and ZDMTK. are double level blocks; ZFKK.-MT disconnects only in the top level and ZDMTH.-MT on both levels. ZDMTK.-TWIN has one input circuit and two disconnectable output circuits. Model ZFK -TG is a fuse or component base terminal block which accepts the ST-SIfuse plugs and ST-BE component plugs shown on a previous page. Color: gray (orange disconnects). Flammability Rating: ULV0. Mounting: NS rails. ZFK.-MT ZDMTK.-TWIN ZDMTK. ZFK -TG AW G ZFK.-MT ZFDK.-MT ZFKK.-MT ZDMTK. ZDMTK.-TWIN ZFK -TG *ZFKK.-MT upper level A, lower level A Knife disconnect terminal block: 1-current As above, except with -circuits Dbl.level term. blk. W/top disconnect As above, w/both levels disconnecting 1-input, -disconnectable outputs Base term.blk for fuse/component plugs D-ZFK.-TWIN D-ZFKD.-MT D-ZFKK.-MT D-ZFK FBRI -N FBSTB - FBSTB - FBSTB - ATP-ZFKKB ZBFM ZBFM ZB End cover, gray, mm wide Fixed Bridge, Position, Breakable Plug-in bridge for term.center, -pos. can be labeled -pos. -pos Partition plate, for separation of terminal block groups, mm thick Marker sheets, flat, for labeling outer grooves (order data, see Accessories for Terminal Blocks ) Marker strips for term. center & plug-in bridges (order data, see Accessories for Terminal Blocks ) Approvals: (ZFDK.-MT, ZFK -TG); (ZFK.-MT) Accessories R a t i n g V A W L 00 * For Terminal Blocks ZFK.-MT ZFDK.-MT ZFKK.-MT ZFK -TG ZFK.-MT, ZFKK.-MT ZFK.-MT, ZFKK.-MT ZFK.-MT, ZFKK.-MT ZFK.-MT, ZFKK.-MT ZDMTK., ZDMTK.-TWIN ZFK.-MT, ZFDK.-MT, ZFKK.-MT ZDMTK., ZDMTK.-TWIN, ZFK -TG ZFK.-MT, ZFDK.-MT, ZFKK.-MT Spring Cage Initiator/Actuator Terminal Blocks The ZDIK wires -conductor initiators on -levels. The lower level can be used to connect the + or ground potentials and the middle level connects the - potential. Once power is fed in, it is distributed in the lower and middle levels via color-coded plug-in bridges, which can also be labeled. The upper level is used to loop in the signal lines and can be interconnected using a screw bridge (FBRI) or a plug-in bridge (FBSTB). The ZVIOK is a -level block. It uses the lower level for grounding, the middle levels for + and - supply, and the upper level for the signal lines. Color: gray. Flammability Rating: ULV0. Mounting: NS rails. ZDIK 1. ZVIOK lvl. Initiator/Actuator term. block -lvl. Initiator/Actuator term. block AW G -1-1 R a t i n g V A W L Dimensions H (NS :./NS :1)././ /. /. /. 0./ Dimensions H (NS :./NS :1)./../ Accessories D-ZDIK 1. D-ZVIOK 1. FBRI -N FBST - FBST - FBST - FBSTB -ZDIK GY FBSTB -ZDIK RD FBSTB -ZDIK BU FBSTB -ZDIK GNYE ZBFM ZB End cover, gray, mm wide End cover, gray, 1 mm wide Fixed bridge, -pos., breakable Plug-in bridge for term.center, can be labeled Plug-in bridge, color-coded -pos., can be labeled -pos. -pos. -pos. gray red blue green-yellow Marker sheet, flat, for labeling outer grooves (order data, see Accessories for Terminal Blocks ) Marker strips for term. center & plug-in bridges (order data, see Accessories for Terminal Blocks ) ZDIK 1. ZVIOK 1. ZDIK 1., ZVIOK 1. ZDIK 1., ZVIOK 1. ZDIK 1., ZVIOK 1. ZDIK 1., ZVIOK 1. ZDIK 1., ZVIOK 1. For Terminal Blocks 1 Benjamin Franklin is the first to define positive and negative electrical charges. Lacking terminology, he invents new words such as positive, negative, battery, condenser, charge, discharge, electrical shock, electrician, armature, brush and conductor

11 CLIPLINE Spring Cage Terminal Blocks Spring Cage Fuse Terminal Blocks with Disconnect Lever Spring cage fuse terminal blocks from Phoenix Contact satisfy two important basic tasks of connection systems. First, they hold fuses and secondly, they take on the task of power distribution using fixed bridges. block features a hinged disconnect lever for quick and safe fuse exchanges. These terminal blocks are available for either x 0 or. x mm fuses, and a light indicator option which glows when the fuse is blown. Color: black. Flammability Rating: ULV0. Mounting: NS rails. ZFK -HESI ( X 0) ZDK -HESI (. X ) AW G ZFK -HESI ( X 0) ZFK -HESILED ( X 0) ZFK -HESILA0 ( X 0) ZFK -HESI (. X ) ZFK -HESILED (. X ) ZFK -HESIL0 (. X ) Fuse term. block for x 0 mm fuses As above, except w/ V light indicator As above, except with 0 V light indicator Fuse term. block for. x fuses As above, except w/ V light indicator As above, except w/0 V light indicator *The current is determined by the fuse; the voltage by the light indicator Accessories 0-0- R a t i n g Dimensions V * A * W L H (NS :./NS :1) /./ ZBFM Marker sheet, flat, for labeling marker grooves (order data, see Accessories for Terminal Blocks ) ZB : unprinted ZB, LGS: 1- ZB, QR: 1- ZB : unprinted ZB, LGS: 1- ZB, QR: 1- ZB : unprinted ZB, LGS: 1- ZB, QR: 1- ZB : unprinted ZB, LGS: 1- ZB, QR: 1- ZB : unprinted ZB, LGS: 1- ZB, QR: 1- For Terminal Blocks Fits all the terminal blocks above. Accessories For Terminal Blocks Zack ( Quick ) Marking Strips ZB marker strip consists of white tear-apart markers which are pushed into the label grooves of the terminal blocks. Three versions are listed below - unprinted (for use with a marking pen) and consecutive numbers labeled horizontally or vertically. Other available options include colored markers, decade labeling (, 0, 0-0), identical numbers, larger 0 piece sections and custom printing. Call for details on these and other options. For Te r m. Wi d t h mm mm mm mm mm 0 pc. marker strip, unprinted -pc. marker strip, labeled horizontally, w/consecutive numbers 1-, etc. (specify*) As above, except labeled vertically pc. marker strip, unprinted -pc. marker strip, labeled horizontally, w/consecutive numbers 1-, etc. (specify*) As above, except labeled vertically pc. marker strip, unprinted -pc. marker strip, labeled horizontally, w/consecutive numbers 1-, etc. (specify*) As above, except labeled vertically pc. marker strip, unprinted -pc. marker strip, labeled horizontally, w/consecutive numbers 1-, etc. (specify*) As above, except labeled vertically pc. marker strip, unprinted -pc. marker strip, labeled horizontally, w/consecutive numbers 1-, etc. (specify*) As above, except labeled vertically * Specify consecutive numbers. For example: ZB, LGS: 1- (or ZB, QR: 1-) ZB ZB, LGS: 1-0 etc. up to ZB, LGS: 1-00 Zack ( Quick ) Marking Sheets P e r S t r i p ZBFM marker sheet consists of 0, 0 or white tear-apart markers for marking terminal blocks and smaller modules with marker grooves. Three versions are listed below: unprinted for use with a marking pen: with consecutive numbers (1-0, 1-0 or 1-) labeled horizontally: and with identical strips of consecutive numbers (ie 1-, -0, etc.). Special marker sheets are also available per customer specifications. Call for details. For Te r m. Wi d t h mm mm mm mm 001 ZBFM /WH: UNPRINTED ZBFM /WH, LGS: 1-0 ZBFM /WH, LGS: 1- ZBFM /WH: UNPRINTED ZBFM /WH, LGS: 1- ZBFM /WH, LGS: 1-1 ZBFM /WH: UNPRINTED ZBFM /WH, LGS: 1-0 ZBFM /WH, LGS: 1- ZBFM /WH: UNPRINTED ZBFM /WH,LGS: 1-0 ZBFM /WH, LGS: 1-0-pc. marker sheet, unprinted 0-pc. marker sheet, labeled horizontally w/consecutive number 1-0 As above, except w/ identical strips of consecutive numbers 1-, etc. Specify -pc. marker sheet, unprinted -pc. marker sheet, labeled labeled horizontally, w/consecutive numbers 1- As above, except w/ identical strips of consecutive numbers 1-1, etc. Specify 0-pc. marker sheet, unprinted 0-pc. marker sheet labeled horizontally w/consecutive numbers 1-0 As above, except w/ identical strips of consecutive numbers 1-, etc. Specify 0-pc. marker sheet, unprinted 0-pc. marker sheet, labeled horizontally w/consecutive numbers 1-0 As above, except w/ identical strips of consecutive numbers 1-, etc. Specify P e r S h e e t ZBFM / or /WH, LGS: 1-, -0, etc. up to 1-0. ZBFM /WH, LGS: 1-1, 1-, etc. up to -. ZBFM /WH, LGS: 1-, -, etc. up to -0.

12 Accessories for CLIPLINE Terminal Blocks Marker Pens For manually labeling unprinted marker strips and sheets. Smear-proof and waterproof. Black Mfr. s Type M-PEN M-PEN Tip Size 0. mm 0. mm.0.0 Fits Block TP-UK ATP-UK ATP-UKK / ATP-UKKB ATP-DIK 1. ATP-DIKD 1. ATS-MBK ATS-ATK-BEN ATP-URTK/SS Partition Plates ATP partition plates extend on all sides above the terminal profile for a clear visual and electrical separation of terminal block groups UK UK1., UK.N,UKN, UKN, UKN, UKN, UKN, UK-TG UKK, UKK UKKB, UKKB DIK1. DIKD1., DOK1. MBK/E-Z, MBK/E, MBK/E URTK/S-BEN URTK/SS TS Separating Plates These plates guarantee electric and visual isolation in the cases of bridges in the terminal center which are in direct contact with one another. It s designed to be inserted later and snap locks into place. A separation plate should be used on both sides for all bridges in the terminal center. Fits Block TS-KK TS-K TS-RTK-BEN TS-URTK/SS UK.N,UKK, UKKB, UKK, UKKB,UDK, UDK, MBK/E-, MBK/E MBK/E, MBKKB., MZFKKB1., ZDIK1., ZVIOK1. UKN, UKN, UKN, UKN, UKN, UK, UK-TWIN, UK- TWIN URTK/S-BEN URTK/SS Mounting Rails The design of these mounting rails complies with European standard EN 00 (NS 1) and EN 00 (NS ), and feature outstanding accuracy and surface tempering. The steel rails are galvanized and yellow chromated. A line of dots is marked along the center of the rail to simplify drilling of mounting holes. Length: m ( ). NS 1 UNPERFORATED NS 1 PERFORATED NS /. UNPERFORATED NS /. PERFORATED NS /1 UNPERFORATED NS /1 PERFORATED Dimensions W H T 1 NS / End Brackets for Mounting Rails Mounts to end of terminal block assembly to prevent blocks from being pushed along mounting rail. Flammability Rating: ULV0. Color: gray M f r. s Ty p E/UK e O r d e r N o. Description E/MK 1 1 Snaps on NS 1 mounting rail, mm wide. E/UK 1 For NS or NS rail,. mm wide. E/UK 1 As above, except for and -level blocks.* Clipfix 01 Toolless for NS rail,. mm wide E/NS N 000 One screw for NS or NS rail,.mm wide mm test plug sockets for UK-terminal blocks. Material: Silver-plated brass Reducing plug Reducing plug for connecting a mm test plug to a. mm test plug socket. Gray. Mfr. s Type RPS ( 00). Test Plug Sockets E/UK Fits Block PSB // PSB // PSB // UK.N, UKN, UKN UKN, UKN, UKN UK Stripping Tools QUICK-WIREFOX QUICK-WIREFOX... These stripping tools "automatically" adjust to the proper AWG depth. QUICK- WIREFOX has an AWG range of 0- and QUICK-WIREFOX has a range of AWG -. Mfr. s Type Description QUICK-WIREFOX Stripping Tool, AWG QUICK-WIREFOX Stripping Tool, AWG -.00 QUICK-WIREFOX EM 1 Repl. Blade for WIREFOX.00 QUICK-WIREFOX EM Repl. Blade for WIREFOX.00 Tempered steel to ensure high cutting efficiency over a long period of time. Conductors can be cut easily and cleanly due to the specific design of the blades. For copper and aluminum conductors and fixed bridges FBI-, FBI-, FBI-, FBI-1. Cutting capacity (solid strand/multi-strand/fine strand): // AWG. Mfr. s Type Length Cutfox FB SZF0-0.X. SZF1-0.X. SZF-0.X.0 Cable Cutter 1mm (.") Screwdrivers for Spring Cage Terminal Blocks Ideal for ZFK and ST Series spring cage terminal blocks. l Ergonomically designed l Fully insulated blade shaft l Flat tips Mfr. s Type Blade Size Length 0.Tx.W x 0.T x.w x 0 0.T x.0w x The word TELEVISION first appeared In print in SCIENTIFIC AMERICAN Magazine * mm wide

13 Printed Circuit Terminal Blocks Multi-Position PCB Terminal Blocks These terminal blocks are fully enclosed and feature screw connections and nickel-plated copper alloy clamping parts. Both mini and standard versions are available, with straight or angled connections. The four standard versions also feature interlocking design for perfect alignment and pitch retention. Model SMKDSP1. incorporates test connections for.mm test plugs. Color: green (black or gray available). Approvals: ULRecognized, CSACertified. MKDS 1 SMKDS 1 MKDSN 1. SMKDSN 1. MKDS 1. SMKDSP1. MKDS MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/-.1 MKDS1/1-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/-.1 SMKDS1/1-.1 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./-.0 MKDSN1./1-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./-.0 SMKDSN1./1-.0 MKDS1./-.0 MKDS1./-.0 MKDS1./-.0 MKDS1./-.0 MKDS1./-.0 MKDS1./1-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./-.0 SMKDSP1./1-.0 MKDS/-.0 MKDS/-.0 MKDS/-.0 MKDS/-.0 MKDS/ No.of Pos Mini PC terminal block W/straight connections Pitch:.1 mm UL: 00 V@ A, 0- AWG IEC: 0 1 A, - AWG Above, except with o angled connections Standard PC terminal block W/straight connections Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 1. A, - AW G As above, except with o angled connections Standard PC terminal block W/straight connections Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 A, -1 AW G As above, except with o angled connections and test connections Standard PC terminal block W/straight connections Pitch:.0 mm UL: 00 1 A, 0-1 AWG IEC: 0 A, -1 AW G Dimensions W H L Note To label, optional self-adhesive marker cards are available: SK.1/....for blocks with.1 mm pitch or SK.0/. for blocks with.0 mm pitch. To order, see Accessories. 10 Joseph Henry discovers self-inductance, an efficient electromagnet. The unit of inductance, the Henry, is named for Henry in 1.

14 COMBICON Plug-In Connectors MINI-COMBICON Plugs and Headers The Mini-Combicon Series is a low profile connector with a generous wire range and is available from to 0 positions. It features a unique design where each plug can be keyed specifically to a corresponding header to prevent mismatched connections in close proximity. The keying is accomplished by the combination of cutting away molded elements on the plugs, and inserting optional key tabs in the corresponding grooves of the header. Color: green (black or gray available). Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK.1/. are used for labeling. To order, see Accessories. MC1./-ST- MC1./-G- MCV1.-G- Standard COMBICON plugs and headers are available in to positions with and without screw flanges and in.0 mm pitch (.0 mm pitch also available). They feature generous connection space and higher voltage and current ratings than the MINI-COMBICON series. Plugs with. mm test connections are also available (call for details). Color: Green (black or gray availble on request). Approvals: ULrecognized, CSAcertified. Optional self-adhesive marker cards SK.0/. are used for labeling. To order, see Accessories. MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./-ST-.1 MC1./1-ST-.1 MC1./1-ST-.1 MC1./1-ST-.1 MC1./1-ST-.1 MC1./-ST-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./-G-.1 MC1./1-G-.1 MC1./1-G-.1 MC1./1-G-.1 MC1./1-G-.1 MC1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./-G-.1 MCV1./1-G-.1 MCV1./1-G-.1 MCV1./1-G-.1 MCV1./1-G-.1 MCV1./-G-.1 CP-MSTB MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./1-ST-.0 MSTB./1-ST-.0 MSTB./1-ST-.0 MSTB./1-ST-.0 MSTB./-ST-.0 MSTB./1-ST-.0 MSTB./1-ST-.0 MSTB./1-ST-.0 MSTB./0-ST-.0 MSTB./1-ST-.0 MSTB./-ST-.0 MSTB./-ST-.0 MSTB./-ST No. of Pos MINI-COMBICON plug w/straight plug-in Pitch:.1 mm UL: 00 A, 0-1 AWG IEC: 0 A, - AW G MINI-COMBICON header w/straight plug-in Pitch:.1mm UL: 00 A IEC: 0 A MINI-COMBICON header w/ vertical plug-in Pitch:.1 mm UL: 00 A IEC: 0 A Dimensions W H L Insertable key tabs, red (0 piece package). Inserts into the slots on Mini-Combicon headers. COMBICON Plugs and Headers No. of Pos COMBICON plug w/straight plug-in Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 1 A, -1 AW G COMBICON Plugs and Headers (Continued on next page) Dimensions W H L

15 COMBICON Plug-In Connectors COMBICON Plugs and Headers (Continued from previous page) MSTB./-STF MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./-STF-.0 MSTB./1-STF-.0 MSTB./1-STF-.0 MSTB./1-STF-.0 MSTB./1-STF-.0 MSTB./-STF-.0 MSTB./1-STF-.0 MSTB./1-STF-.0 MSTB./1-STF-.0 MSTB./0-STF No. of Pos COMBICON plug w/straight plug-in and screw flanges Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 1 A, -1 AW G Note: flanges Length includes screw Dimensions W H L MVSTBR./-ST MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBE./-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBE./-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBR./1-ST-.0 MVSTBR./1-ST-.0 MVSTBR./1-ST-.0 MVSTBR./1-ST-.0 MVSTBR./-ST-.0 MVSTBR./1-ST-.0 MVSTBR./1-ST-.0 MVSTBR./1-ST-.0 MVSTBR./0-ST-.0 MVSTBR./1-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST-.0 MVSTBR./-ST COMBICON plug w/plug-in direction vertical to the conductor axis and connection point facing the smooth wall of the header. Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 1 A, -1 AW G Note: Can be key-coded using optional coding tabs CP-MSTB (for the plug) and CR-MSTB (for the corresponding header). To order, see Accessories MVSTBW./-ST MSTB./-G MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./1-ST-.0 MVSTBW./1-ST-.0 MVSTBW./1-ST-.0 MVSTBW./1-ST-.0 MVSTBW./-ST-.0 MVSTBW./1-ST-.0 MVSTBW./1-ST-.0 MVSTBW./1-ST-.0 MVSTBW./0-ST-.0 MVSTBW./1-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MVSTBW./-ST-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./1-G-.0 MSTB./1-G-.0 MSTB./1-G-.0 MSTB./1-G-.0 MSTB./-G-.0 MSTB./1-G-.0 MSTB./1-G-.0 MSTB./1-G-.0 MSTB./0-G-.0 MSTB./1-G-.0 MSTB./-G-.0 MSTB./-G-.0 MSTB./-G As above, except connection point faces the rippled wall of the header. Pitch:.0 mm UL: 00 A, 0-1 AWG IEC: 0 1 A, -1 AW G Note: Can be key-coded using optional coding tabs CP-MSTB (for the plug) and CR-MSTB (for the corresponding header). To order, see Accessories. C O M B I C O N h e a d e r, open end w/right angled contact/solder pins. Pitch:.0 mm UL: 00 A IEC: 0 1 A COMBICON Plugs and Headers (Continued on next page)

16 COMBICON Plug-In Connectors COMBICON Plugs and Headers (Continued from previous page) MSTBA./-G MSTB./-GF MSTBV./-G MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./1-G-.0 MSTBA./1-G-.0 MSTBA./1-G-.0 MSTBA./1-G-.0 MSTBA./-G-.0 MSTBA./1-G-.0 MSTBA./1-G-.0 MSTBA./1-G-.0 MSTBA./0-G-.0 MSTBA./1-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTBA./-G-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./-GF-.0 MSTB./1-GF-.0 MSTB./1-GF-.0 MSTB./1-GF-.0 MSTB./1-GF-.0 MSTB./-GF-.0 MSTB./1-GF-.0 MSTB./1-GF-.0 MSTB./0-GF-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./1-G-.0 MSTBV./1-G-.0 MSTBV./1-G-.0 MSTBV./1-G-.0 MSTBV./-G-.0 MSTBV./1-G-.0 MSTBV./1-G-.0 MSTBV./1-G-.0 MSTBV./0-G-.0 MSTBV./1-G-.0 MSTBV./-G-.0 MSTBV./-G-.0 MSTBV./-G No. of Pos COMBICON headers with side panels with right angled contact/solder pins Pitch:.0 mm UL: 1 A & 00 A IEC: 0 1A COMBICON header w/screw flanges,with right angled contact/solder pins Pitch:.0 mm UL: 1 A & 00 A IEC: 0 1 A COMBICON header, open-end, with vertical plug-in Pitch:.0 mm UL: 1 A & 00 A IEC: 0 1 A Dimensions W H L MSTBVA./-G MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./1-G-.0 MSTBVA./1-G-.0 MSTBVA./1-G-.0 MSTBVA./1-G-.0 MSTBVA./-G-.0 MSTBVA./1-G-.0 MSTBVA./1-G-.0 MSTBVA./1-G-.0 MSTBVA./0-G-.0 MSTBVA./1-G-.0 MSTBVA./-G-.0 MSTBVA./-G-.0 MSTBVA./-G COMBICON header with side panels, with vertical plug-in Pitch:.0 mm UL: 1 A & 00 A IEC: 0 1 A

17 MDSTB./-G-.0 MDSTB./-G-.0 COMBICON Plug-In Connectors Double-Level COMBICON Headers The MDSTB./-G-double-level headers are offset by mm in the plug-in direction and by half a pitch (. mm) to improve visibility of and accessibility to the bottom level. By fitting the -and -position double-level blocks in rows so that they interlock, any number of straight plug-in positions can be created. The levels of MDSTB./-G1 are not offset. They are supplied in blocks with,,, or up to 0 fixed positions per level and always have side panels to prevent incorrect plug insertion. Color: green (black or gray available on request). Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK.0/.0 mm are used for labeling. To order, see accessories below No. of Pos. Double-level COMBICON header, openend, with offset levels and right angled contact/solder pins. Pitch:.0 mm UL: 1 A & 00 A IEC: 0 A Dimensions W H L.*.* MDSTB-SE MDSTB.-AS 1 10 Optional side element for lateral sealing of MDSTB./-G Optional ejector, assembles on each side of MDSTB./-G.. MDSTB./G MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./-G1-.0 MDSTB./1-G1-.0 MDSTB./1-G1-.0 MDSTB./1-G1-.0 MDSTB./1-G1-.0 MDSTB./-G1-.0 MDSTB./1-G1-.0 MDSTB./1-G1-.0 MDSTB./1-G1-.0 MDSTB./0-G Double-level COMBICON header with Side panels, without offset levels, W / right angled contact / solder pins Pitch:.0 mm Rating: 0 V, A MDSTB./G1 *lower level width Power-COMBICON Plugs and Headers POWER-COMBICON is a new improved version of the standard COMBICON connectors. It features a higher current capacity, an extended wire range and a small pitch of. mm. Both the plugs and headers can be key coded using optional CP-HCC coding tabs. Color: green. Approvals: ULRecognized, CSA Certified. Optional self-adhesive marker cards SK./. mm are used for labeling. To order, see Accessories below. Features l High Current Capacity l Expanded conductor size l Optional key-coding PC/-ST-. PC/-ST-. PC/-ST-. PC/-ST-. PC/-ST-. PC/-ST-. PC/-ST. PC/-ST-. PC/-ST-. PC/-ST-. PC/1-ST-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/-G-. PC/1-G No. of Pos. 1 1 POWER-COMBICON plug with straight Plug-in Pitch:. mm AWG: - Rating: 00 V, 0 A POWER-COMBICON header with Right angled contact/solder pins Pitch:. mm Rating: 00 V, 0 A Dimensions W H L CP-HCC 000 Insertable key tabs (0 piece package). Inserts into the slots On the POWER-COMBICON plugs and headers. 0.0 SK.1/. :UNPRINTED SK.1/.:1- SK.0/.: UNPRINTED SH.0/.:1- SK./.:UNPRINTED SK./.:1- RPS CP-MSTB CR-MSTB Accessories for PCB Terminal Blocks and COMBICON Connectors Order N o pc. Marker card, unprinted, 1 rows of w/pitch division marks pc. Marker card, 1 rows of identical consec. nos. 1-, -0, etc: up to 1-0 (specify) pc. Marker card, unprinted, 1 rows of w/pitch division marks pc. Marker card, 1 rows of identical consec. nos. 1-, -0, etc: up to 1-0 (specify) pc. Marker card, unprinted, 1 rows of w/pitch division marks pc. Marker card, 1 rows of identical consec. nos. 1-,-0, etc: up to 1-0 (specify) Test plug for SMKDSP1. for connecting a mm test plug to a. mm test socket, gray Insertable key tabs, red (0 pc. package) Insertable key tabs, red (0 pc. package)

18 Interface Terminal Blocks PLC Series Approvals: CE, VDE, CSA(CE only for PLC-R/1-1 and PLC-R/1-1/ACT; VDE, UL, CSAapplied for) PLC-R/1 PLC-O PLC-RACT PLC-OACT PLC-RSEN PLC-OSEN PLC-R/1-1 PLC-R/1-1/ACT The PLC interface provides all the advantages of proven modular terminal block technology. As an interface between an automated device and the system peripherals, it is equipped with either a plug-in miniature relay (PLC-R) or optocoupler (PLC-O) which is easily removed with the built-in ejector latch. Additional options are provides by the actuators (ACT) and sensor (SEN) versions, which accept all connections directly at the interface without additional power distribution blocks. Insulated, color-coded plug-in jumpers (A) permit bridging of modules. The jumper, which can be used on the input and output sides, is a continuous bridge which can be cut to length. Input terminal block ( PLC-ESK is the same shape as the PLC interface terminal blocks. It is used to feed bridging potentials and has a nominal current of A. When total current is less than or equal to A, the inputs can take place directly at the PLC interface terminal blocks. Separating plate PLC- ATP, is always required at the start and end of each terminal strip. It can be used for visual separation of groups, separation of neighboring bridges or separation of PLC interfaces with voltages greater than 0 V. PLC-ATP has pre-scored breakout points at the bridging positions so that individual bridges can pass through if needed. Relays and optocouplers are hermetically sealed (IP). Mounting: NS rails. Flammability Rating: ULV0. AWG Range: -1. Connections: screw. Color: green. Dimensions: (W x L x H):. x 0 x mm (terminal width of PLC-R/1-1 and PLC-RI/1-1ACTis 1 mm). Marker strips for labeling are available. Input Vo l t a g e PLC-RSC-DC/1AU PLC-RSC-UC/1AU PLC-RSC-UC/1AU PLC-RSC- 0UC/1AU 1 PLC standard series w/plugable relay (S P D T): AgSnO + gold plated contacts VAC/DC VAC/1VDC 0VAC/0VDC PLC-RSC-DC/1 PLC-RSC-UC/1 PLC-RSC-UC/1 PLC-RSC-0UC/ As above, except w/ AgSnO contacts VAC/DC VAC/1 VDC 0 VAC/0 VDC PLC-OSC-DC/DC/0 PLC-OSC-UC/DC/0 PLC-OSC-0UC/DC/0 PLC standard series w/plugable input optical coupler VAC/1 VDC 0 VAC/0 VDC PLC-OSC-DC/DC/ PLC-OSC-UC/DC/ PLC-OSC-0UC/DC/ 0 As above, except w/power optical coupler VAC/1 VDC 0 VAC/0 VDC PLC-RSC-DC/1/ACT PLC actuator w/plugable relay (1 N/O): W/AgSnO Contacts 1.00 PLC-OSC-DC/DC//ACT PLC actuator w/plugable power optical coupler 0.00 PLC-RSC-DC/1AU/SEN PLC-RSC-UC/1AU/SEN PLC-RSC-0UC/1AU/SEN 1 0 PLC sensor w/plugable relay (1 N/O), w/agsno contacts VAC/1 VDC 0 VAC/0 VDC PLC-OSC-DC/DC/0/SEN PLC-OSC-UC/DC/0/SEN PLC-OSC-0UC/DC/0/SEN 0 PLC sensor w/plugable input optical coupler VAC/1 VDC 0 VAC/0 VDC PLC-RSC-DC/1-1AU PLC-RSC-UC/1-1AU PLC-RSC-UC/1-1AU PLC-RSC-0UC/1-1AU 1 1 PLC standard series w/plugable relay ( P D T), w/agni + gold plated contacts VAC/DC VAC/1 VDC 0 VAC/0 VDC PLC-RSC-DC/1-1 PLC-RSC-UC/1-1 PLC-RSC-UC/1-1 PLC-RSC-0UC/ As above, except AgNi contacts VAC/DC VAC/1 VDC 0 VAC/0 VDC PLC-RSC-DC/1-1/ACT PLC actuator w/plugable relay ( N/O), w/agni contacts.00 Accessories for PLC Series For Terminal Blocks PLC-ESK GY 0 Input terminal block, mm wide, AWG -, 0 V, A, gray All PLC blocks 1.00 PLC-ATP BK FBST00-PLC RD FBST00-PLC BU FBST00-PLC GY 1 Separating plate, mm thick, black Plug-in jumper, 00 mm (1. ) long, A max., cuttable, Red Blue Gray All PLC Blocks All PLC Blocks ZB ZB Marker strips (order data, see Accessories for Terminal Blocks in Modular Terminal Block section) All PLC blocks, except PLC-R/1-1, PLC-R1-1/ACT PLC-R/1-1, PLC-R/1-1/ACT.1.1

19 Interface Modules VARIOFACE modules with Ribbon Cable or D-Sub Plug Connectors Varioface modules are universal interface elements that simplify system wiring between the peripherals and input-output levels of automation devices. They are electrically connected, position by position, on the input and output sides. These modules are available with either ribbon or D-Sub connectors, with or without a light indicator in each signal path. The ribbon connector modules offer a compact -level version with. mm test connections (FLK), a standard -level version (FLKM), and a -level version (FLKMS). The D-Sub connector modules offer a compact -level version with test connections (FLK-DSUB), a standard -level version (FLKM-DSUB) and a -level version with a light indicator for each connection point (FLKM-DSUB/LA). module includes a PMB marker carrier for labeling the module. Connections: screw. Color: green. Mounting: universal. FLK FLK FLK FLK 0 FLK FLKM FLKM 1 FLKM FLKM 0 FLKM FLKM FLKM 0 FLKM 0 FLKM 0 FLKM No. of p o s Ribbon cable pin strip module, compact -level w/test connections AWG: -1 Rating: 0 VAC, 1A Ribbon cable pin strip module, standard -level AWG: -1 Rating: 0 VAC, 1A Dimensions W H L FLKM FLKMS FLKMS 0 FLKMS FLKMS FLKMS 0 FLKMS 0 FLKMS 0 FLKMS Ribbon cable pin strip module, standard -level AWG: -1 Rating: 0 VAC, 1A FLKMS FLK-DSUB FLK-D SUB/S FLK-D SUB/S FLK-D0 SUB/S FLK-D SUB/B FLK-D SUB/B FLK-D0 SUB/B FLKM-D SUB/S FLKM-D1 SUB/S FLKM-D SUB/S FLKM-D SUB/S FLKM-D0 SUB/S FLKM-D SUB/B FLKM-D1 SUB/B FLKM-D SUB/B FLKM-D SUB/B FLKM-D0 SUB/B D-SUB pin strip module, compact -level w/test connections AWG: -1 Rating: 1 VAC/DC,. A D-SUB socket strip module, compact standard -level AWG: -1 Rating: 1 VAC,. A D-SUB pin strip module, standard -level AWG: -1 Rating: 1 VAC/DC,. A D-SUB socket strip module, standard -level AWG: -1 Rating: 1 VAC/DC,. A FLKM-D SUB/S/LA FLKM-D1 SUB/S/LA FLKM-D SUB/S/LA FLKM-D SUB/S/LA FLKM-D0 SUB/S/LA 1 0 D-Sub pin strip module, -level w/light indicator AWG: -1 Rating:,. A* FLKM-DSUB FLKM-D SUB/B/LA FLKM-D1 SUB/B/LA FLKM-D SUB/B/LA FLKM-D SUB/B/LA FLKM-D0 SUB/B/LA D-Sub socket strip module, -level w/light indicator AWG: -1 Rating:,. A* *0 position module: A=0. Accessories FLKM-DSUB/LA ES/LP-BW 0 -pc. perforated blank insert labels for PMB marker carrier RPS 00 Test plug, for connecting a mm test plug to a. mm test socket.. 1 Joseph Henry invents the relay to overcome the resistance of long telegraph lines. Henry did not patent his ideas, thus setting the stage for Samuel Morse.

20 Isolation Amplifiers and Power Supply Units MCR Loop-Powered Isolator l l l With analog signal isolation No additional supply CE Mark With these MCR (passive) loop-powered isolators, a standard signal of 0 () - 0 macan be isolated, filtered and amplified in one conversion step. Since the isolator requires no external power, installation time and cost is greatly reduced. These components guarantee potential separation between the control electronics MCRCLP-I/1-00 and peripherals. In addition, interference signals above Hz are suppressed. These modules snap onto mm wide DIN-rails and are available in 1, and -channel versions. Dimensions: x. x 1. mm (1 and channel models), x. x. mm (-channel model). Max. input: 0 V, 0 ma. Color: green. Approvals: CE. MCR-1CLP-I/I-00 MCR-CLP-I/I-00 MCR-CLP-I/I-00 I n p u t / O u t p u t 0()-0 ma O u t p u t S i g n a l 1 channel -channel -channel This outlet is fully enclosed, shock proof and the ground prongs are reversed for greater protection. It snaps onto mm wide DIN-rails and can be mounted either vertically or horizontally. Screw clamp terminal block, VDFK provides reliable connections. Three versions are available: 1 A, 0 A, or 1 A with ground fault interruption. (GFI). EM-DUO-/1 EM-DUO-/1-GFI EM-DUO-/0 Dual Utility Outlet General Specifications Technical Data Rated voltage Rated Current Maximum wire size Output Signal Dual outlet, 1 A Dual outlet w/gfi, 1 A Dual outlet, 0 A V ac 1/0 amps # AWG Housing Data Color Ivory Material PVC V-0 Maximum temperature o C Dimensions Length Width Depth in.. in.. in Compact Primary Switched-Mode Power Supply Units QUINT Series 1/// A Models 0/0/0 A Models The QUINT series power supplies are industrial single voltage types with primary switched-mode regulator technology and power factor correction option. This technology means the units are lightweight and operate with a high level of efficiency. They are suitable for supplying power to electrical and electronic components in systems throughout automation engineering, plant constructions, process engineering, machine building and controller production. Connections to and from the supplies are made with COMBICON connectors for wiring ease. The output is electronically protected against overload and short circuits. Output characteristics of 1,. and A units: The units can be overloaded for approximately 0 ms without switching off. After this, the units switch off and attempt to switch back on after approximately 1 second. This process repeats itself until the short circuit on the secondary side has been eliminated. Output characteristics of, 0, 0 and 0A units: The unit cuts back the voltage if the current limit is exceeded by % of the nominal current and remains constant at this level. This ensures that down-circuit fuses are blown selectively. Surge Voltage Protection: varistor. Housing: steel plate, sealed: sides ABS ULV0. Function Display: LED. Color: green. Mounting: mm wide DIN-rails. QUINT-PS-AC/DC/1 QUINT-PS-AC/DC/. QUINT-PS-AC/DC/./F QUINT-PS-AC/DC/ QUINT-PS-AC/DC//F QUINT-PS-AC/DC/ QUINT-PS-AC/DC//F QUINT-PS-X0AC/DC/0 QUINT-PS-X0AC/DC/0/F QUINT-PS-X00AC/DC/0 QUINT-PS-X00AC/DC/0/F QUINT-PS-X0AC/DC/0 QUINT-PS-X0AC/DC/0/F QUINT-PS-X00AC/DC/0 QUINT-PS-X00AC/DC/0/F QUINT-PS-X0AC/DC/0 QUINT-PS-X0AC/DC/0/F QUINT-PS-X00AC/DC/0 QUINT-PS-X00AC/DC/0/F I n p u t VA C x0 x x00 x00 x0 x0 x00 x00 x0 x0 x00 x00 O u t p u t V D C A m p s P o w e r F a c t o r AW G I n p u t O u t p u t Dimensions W H L

21 Instrumentation Products Universal Isolator/Converter The MCR-C-UI-UI-DCI modules are used for isolation and conversion of analog signals. Primary applications are to provide ground loop isolation and to convert one analog signal to another. MCR Loop-Powered Isolator l With analog signal isolation l No additional supply l CE Mark Configuration via DIPswitch The Universal Isolator/Converter requires a DC supply voltage of between 1 and 0 volts. A green LED on the top of the module indicates when power is applied. A V DC 0mA power supply, part number MCR-PS- AC/DC/0, is available in the same housing shape (call Carlton-Bates for details and ordering information). Two sealed potentiometers on top allow zero/span adjustments. The unique housing provides easy access to the universal DIP switches, which allow you to change the inputs and outputs so that more than 00 signal variations are possible. The module snaps onto mm wide DIN-rails. The signal and power lines are securely connected to the modules via removable COMBICON connections. Approvals: UL Recognized (U.S. and Canada), Class 1, Div., CE. Dimensions: (Lx H x W): x. x 1. mm. Max. Input: 0 V or 0 ma. Max. Output: 1 V or 0 ma. I n p u t / O u t p u t AW G MCR-C-UI-UI-DCI 1 Selectable* *The modules will be delivered with these standard settings: 0- V/0- V (input/output). The user then has the option of changing the setting (via the DIP switches) to suit system requirements. Call if more details are required. MCR Loop-Powered Isolator with Selectable Input This loop powered isolator is used when an active or powered PLC card must interface to a -wire transmitter. It provides signal conversion, amplification and filtering. On the output side of the isolator, the -0 ma loop provides power for the module which then provides isolation and signal conversion. Two zero/span potentiometers on top allow fine adjustment of + %. The signal and power lines are securely connected to the module via removable COMBI- CON connectors. The MCR loop-powered isolator is particularly suitable for the electrical isolation of active PLC input cards from the process peripherals. A p p r o v a l s: CE. Dimensions: (Lx H x W): x.x 1. mm. Mounting: mm wide DINrails. I n p u t / O u t p u t AW G Selectable*/ MCR-CLP-UI-I ma *The modules will be delivered with the standard settings: -0 ma/-0 ma (input/output). The user then has the option of changing the input settings (via the DIPswitches) to suit system requirements. Call if more details are required. Dip Switch Selectable With these MCR (passive) loop-powered isolators, a standard signal of 0 () - 0 ma can be isolated and filtered in one module. Since the isolator requires no external power, installation time and cost is greatly reduced. These components guarantee potential separation between MCRCLP-1/1-00 the control electronics and process peripherals. In addition, EMI/RFI interference is suppressed. These modules snap onto mm wide DIN-rails and are available in 1, and -channel versions. Dimensions: x. x 1. mm (1 and channel models), x. x. mm (-channel model). Max.Input: 0 V, ma. Color: green. Approvals: CE. MCR-1CLP-I/I-00 MCR-CLP-I/I-00 MCR-CLP-I/I-00 I n p u t / O u t p u t 0 () - 0 ma O u t p u t S i g n a l 1-channel -channel -channel MCR Programmable Temperature Transducers for RTDs and Thermocouples The programmable MCR-T module converts and isolates temperature signals from resistance thermometers (RTDs), thermocouples and sensors with linear mv characteristics into standard industrial analog signals. The module, which has an electronic switching PNP transistor output (0 ma/v), is factory-configured for thermocouple sensors and RTDs in,, or -wire systems. The configuration, (which includes characteristic curve connection system, lower and upper measurement ranges, unit of measure and output). must be specified when ordering. The MCR-T-UI/ output options are 0-0 ma, -0 ma, 0- V, 0-V, + V or + V. Call Carlton-Bates for complete ordering information. A p p r o v a l s: CE, UL, Class 1, Div.. Dimensions: (L x H x W): x. x 1. mm. Mounting: mm wide DIN-rails. MCR Temperature Transducers C o n f i g u r a t i o n AW G MCR-T-UI-E 1 Specify These modules convert signals from PT-0 RTD sensors and Type J or K thermocouples into electrically standardized analog signals. They are connected via insertable COMBICON plugs and include two zero/span potentiometers on top for fine adjustment of + %., or -conductor connections, sensor type, cold points (thermocouples), temperature ranges and output signals are selectable via DIP switches. The desired settings can be indicated when ordering (call Carlton-Bates for ordering information). If the desired setting are not provided, the modules will be supplied with the standard settings shown below. Approvals: CE. Dimensions (Lx H x W): x. x 1. mm. Mounting: mm wide DIN-rails. AWG: -1 MCR-PT-0- Standard Settings MCR-PT-0-U/ MCR-PT-0-I/ MCR-PT-0-U/DC/ MCR-PT-0-I/DC/ 0 For PT-0,,, -conductor technology For PT-0,,, -conductor technology As above, except auxiliary power galvanically isolated As above, except auxiliary power galvanically isolated -conductor, 0-0oC, 0- V output -0 maoutput 0- V output -0 maoutput MCR-TE-JK-U/ MCR-TE-JK-I/ MCR-TE-JK-U-E/ MCR-TE-JK-I-E/ 1 1 For thermocouples type J, K For thermocouples type J, k As above except with isolated input As above except with isolated input Type K, 0-00oC, 0- V output -0 maoutput 0- V output -0 maoutput

22 Instrumentation Products Data Interface Converters and Isolators Industrial data conversion needs industrial, not office grade converters. These isolators and converters feature 000V electrical isolation and surge suppression, built in as standard. The modules are DIN-rail mountable and require VDC power. Cable shielding is maintained and removeable wire terminal blocks reduce installation time. DIPswitches allow customization for specific applications. Approvals: CE, UL, Class 1. Div.. Dimensions (LxHxW): xx.mm. PSM-ME-RS/RS-P PSM-ME-RS/RS-P PSM-ME-RS/TTY-P PSM-ME-RS/RS-P 1 RS repeater for MODBUS, PROFIBUS and others Isolator for RS systems Convertor for RS to TTY protocol Convertor for RS to RS equipment 0.00 SUBCON Field Bus Connectors The SUBCON D-SUB connectors (with screw connection) can be connected quickly and conveniently in the field without soldering or crimping tools. The plug-in contacts are connected to clearly numbered screw terminals blocks. The -position version is especially suited to INTERBUS and a special version with terminating resistor is available for PROFIBUS. Both male and female connectors are available in, 1 and -pin versions. AWG: - Varioface Modules for Solid-State Relays These modules allow for DIN-rail mounting of standard solid state relays in a high density, self-contained package. The screw terminal blocks on both sides of the module can hold a wide range of conductor sizes (AWG -1). It is available for screw-down mounting of 1, or relays. A fuse and indicator for each relay is located on the base. The relays are ordered separately. Call Carlton-Bates for details. Rating: 0 VDC, A. Dimensions (Lx H): x 0. mm. SUBCON /F-SH SUBCON /M-SH SUBCON 1/F-SH SUBCON1/M-SH SUBCON /F-SH SUBCON /M-SH SUBCON PLUS PROFIB Order N o. 1 -pin female -pin male 1 1-pin female 0 1-pin male 1 -pin female -pin male PROFIBUS Dimensions A....0 B C FLKM-I/O FLKM--I/O FLKM--I/O Order N o Module for 1-relay Module for -relays Module for -relays Width Varioface Modules for Interface Relays 0mm 1. WIRE STRIP LENGTH MM (.0 ) Interface relays are used in industrial applications where low-capacity input control signals control high-capacity output signals. The two-position changeover version allows a load resistor to be switched with one single control signal. The DC versions are provided with an LED status indicator and contain a damping diode to protect the control circuit. With the AC versions, the switching status is indicated with a glow lamp and does not have a damping diode. The relay supplied with the units is SPDT, hermetically encapsulated with A contacts. AWG: -1. Rating: determined by the relay. Mounting: mm wide DIN-rail. mm..0 mm. Input Vo l t s UMK-REL /1-ST UMK-REL /1-ST UMK-REL/1-1-ST UMK-REL /1-1-ST VAC VAC Single position change-over switch, w/light indicator and damping diode As above, except with glow lamp, without damping diode Two-position change-over switch, w/light indicator and damping diode As above, except with glow lamp, without damping diode Call for quantity pricing! 100 Alessandro Volta develops the battery, the first source of continuous electric current. It consisted of a number of copper and zinc discs arranged alternately in a vertical stack, separated by paper moistened in acid. The practical unit of potential difference, the volt, is named for Volta.

23 Instrumentation Products PLC Protector MAINS-MODUTRAB The MAINS-MODUTRAB mounts on standard DIN-rails and interfaces with terminal blocks to provide surge voltage protection for single-phase power supplies. Features a thermal detection device, which disconnects the protection path from the power supply in the event of varistors overheating. Includes two indicator lamps: green monitors input voltage: red indicates power to the source has been disconnected. Black, enclosed housing is rated IP0. Also available without light indicators (MTOLA). Mfr. s Type Input Voltage AWG With light indicators MT-PE/S-AC MT-PE/S-0AC MT-PE/S-AC MT-PE/S-0AC Without light indicators MT-PE/S-AC-OLA MT-PE/S-0AC-OLA V AC/DC 0 V AC/DC V AC/DC 0 V AC/DC V AC/DC 0 V AC/DC Housing width: 0 mm I/O Signal Protection TERMITRAB TERMITRAB provides stage protection (diode, MOV, gas tube) for signals. The narrow.mm housing provides high density protection and is rated for 000 amps of x 0 Msecond surge current. The analog model protects one loop while the digital model protects two digital signals. Grounding is accomplished via a metal grounding foot. IP0 housing, accepts wire sizes AWG to1 AWG, CE approved. Mfr. s Type Description TT-PE-DC TT-/-DC 1 1 Analog (-0mA, 0- VDC) Digital signal protection.00.1 Surge Protection for Conduit Systems SURGETRAB The surge protector SURGETRAB-S-PT1-PE-DC is designed specifically for installation in conduit systems. The protective circuit is on a small PCB housed inside a. long pipe with two / threaded ends. The pipe has a screw cover on one end, and, with a T- adapter, this device can be integrated into any conduit system. The -stage protective circuit provides protection for conductor pairs in floating signal circuits. A powerful gas-filled -electrode surge arrester and a low limiting diode are decoupled by resistors, providing both fine and coarse protection. Two terminal blocks on the PCB clearly marked IN and OUT provide secure connections. The PCB grounding wire is connected to a washer on one end of the pipe. The ground is completed when the pipe screw cover is tightened. Nominal voltage: VDC. Max. voltage: VDC. Nominal Current: 0 ma. AWG: -. Max. response time: normal mode, 1 ns: common mode, 0ns. Mfr. s Type Description S-PT1-PE-DC S-PT1-PE-DC/P 1 Pipe stub w/integrated PCB PCB only without pipe stub Phoenix Surge Voltage Protection TRABTECH (Transient Absorption Technology) The All-round Protection Concept - Lightning Current Arresters and Mains Surge Voltage Protection - Surge Voltage Protection Analog Digital I/O - Surge Voltage Protection for Data Interfaces - Telecommunication Protection - Testers - Surge Voltage Protection for Special Applications - Material for Equipotential Bonding and TRABTECH Housings

24 Mfr. s Type VC-K1/M-SET VC-K/M-SET VC-K/M-SET VC-K/M-SET VC-M1/M-SET VC-M/M-SET VC-M/M-SET VC-M/M-SET VC-EMV1/M-SET VC-EMV/M-SET VC-EMV/M-SET VC-EMV/M-SET Fig. 1 Contact Inserts for Plugs Order No VC-K-SET PLUSCON MODULAR PLUG CONNECTORS Hood Size VARIOCON Series Connector Sets Dimensional drawing of hood Description Connector set, plastic series Connector set, metal series Connector set, metal, shielded EMC series Fig. Fig. Contact Inserts for Mating Side VARICON is a range of modular plug connectors designed for industrial applications. connector set consists of the following components: either a plastic or metal hood, hood frame, panel mounting frame, panel mounting flanges, marker tag and shield adapter (for EMC series). The modular contact inserts must be ordered separately and are listed below. Three series, with four housing sizes each are available, and feature IP -IP K protection, and can be either PCB or panel mounted. The plastic housings are made of high-impact industrial plastic and can withstand most mechanical and chemical influences. The corrosion resistant metal housings are made of tin and copper-plated zinc die casts. The hoods of all the series have the same shape and dimensions. Two screws ensure a tight connection. Optional glands are listed below. Modular Contact Inserts For Number of Modules Hood Dimensions A B C D These modular contact inserts are based on proven COMBICON technology and are available in three versions. The inserts for the plug connector sets above snap into the mounting frame and can be inserted quickly into the hood. They feature screw connections and socket contacts. The contact inserts for the mating side feature pin contacts and are available in PCB or panel mount options. The panel mount inserts are like the PCB inserts except they are connected via screw terminal blocks. All three versions are 1 mm wide and are offered with, or positions. The individual contacts can be keyed with optional key tabs, preventing mismating when several connectors are in close proximity. Approvals: ULrecognized (U.S. and Canada). Mfr. s Type VC-TFS- VC-TFS- VC-TFS Fig. 1 No. of Pos. Description Contact insert for plug connector Pitch..0. AWG - -. Rating 00V, 0A 0V, A 1V, A... VC-AML- VC-AML- VC-AML- 1 1 Contact insert for mating side-pcb mount V, 0A 0V, A 1V, A.0.. VC-AMS- VC-AMS- VC-AMS Contact insert for mating side-panel mount V, 0A 0V, A 1V, A CP-HCC 000 Keytabs, red, 0 pc. pkg., for all -pos. contact inserts.00/pkg. CP-MSTB 1 Keytabs, red, 0 pc. pkg., for VC-AM, VC-AML, VC-AMS, VC-AMS.00/pkg. Cable Glands Mfr. s Type VC-K-KV-PG (-.) VC-K-KV-PG (-) VC-K-KV-PG (.-.) VC-K-KV-PG (-.) VC-K-KV-PG (-1) VC-K-KV-PG (.-1.) VC-K-KV-PG1 (-.) VC-K-KV-PG1 (-1) VC-K-KV-PG1 (.-1.) VC-K-KV-PG1 (1-1) VC-K-KV-PG1 (1-0.) VC-M-KV-PG (-.) VC-M-KV-PG (-) VC-M-KV-PG (.-.) VC-M-KV-PG (-.) VC-M-KV-PG (-1) VC-M-KV-PG (.-1.) VC-K-KV Order No VC-EMV-KV Cable Dia Description Plastic series for size 1 hoods Plastic series for sizes - hoods Metal series for size 1 hoods VC-M-KV.1..1 Cable glands made of plastic, metal and metal/shielded are available. Plastic and metal glands consist of a rubber seal and pressure screw, which also serves as a strain relief. The shielded version, used with the EMC series connectors, also includes an iris spring and two conical washers, that slip over and contact the braided shielding. Mfr. s Type V C - M - K V-PG1 (-.) V C - M - K V-PG1 (-1) V C - M - K V-PG1 ( ) V C - M - K V-PG1 (1-1) V C - M - K V-PG1 (1-0.) V C - E M V- K -PG V (.-./.) V C - E M V- K -PG V (-./.) V C - E M V- K -PG V (-1/.) V C - E M V- K -PG1 V (-1/.) V C - E M V- K -PG1 V (-1/1) V C - E M V- K V V C - E M V- K -PG1 V (1-1/1.) -PG1 ( / 1. ) Order No Cable Dia Description Metal series for size - hoods Metal shielded series for size 1 hoods Metal shielded series for size - hoods... Note (metal shielded series): The cable shield dia. Is indicated in the part number. For example, VC-EMC-KV-PG1 (-1/1), the /1 indicates a cable shield dia of 1 mm.

25 PLUSCON Sensor/Actuator Breakout Boxes Sensor/Actuator Breakout Boxes with M 1 or M Sockets Sensor/actuator boxes with M 1 slots Pin assignment of the slots 1 + input/output A 0V input/output B PE Sensor/actuator boxes with M slots 1-pos. plug connection -pos. socket 1-pos. plug connection -pos. socket SACBPUR SACBSC SACB-/PUR-M SACB-/CON-M The SACBPUR/SC sensor/actuator boxes are available with, or M1 sockets, feature IP protection and can be supplied with the standard single-occupied sockets or double-occupied sockets, that double the number of sensors that can be connected (when used with the double plugs below). One version comes with a pre-wired master control cable and another version uses spring cage terminal block connections, allowing the user to quickly assemble a cable as desired. Status LEDs show the operating status of the I/O s. The smaller SACB-/ box features M sockets per box, IP protection and control inputs via either master cable or a round plug connection. Normal voltage:. Max. operating voltage: 0 VDC. All of the boxes below include marker strips (replacement strips available). Protective caps are available for unoccupied M 1 sockets. Mfr. s Type SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/1-L-.0 PUR SACB-/1-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-.0 PUR SACB-/-L-SC SACB-/-L-SC SACB-/-L-SC SACB-/P-.0 PUR-M SACB-/P-.0 PUR-M SACB-/P-.0 PUR-M SACB-/P-.0 PUR M SACB-/P-1CON-M SACB-/P-1CON-M PROT M1 ZBN 1:unprinted ZB:unprinted M 1 plugs M 1 sockets Description Sensor/actuator box w/master cable, double-occupied M1 sockets Sensor/actuator box w/master cable, single-occupied M1 sockets Sensor/actuator box w/spring cage terminal blocks, single-occupied M1 sockets Sensor/actuator box w/master cable, single-occupied M sockets No. of Sockets Box w/1-pos. plug, single-occupied M sockets Box w/1-pos. plug, single-occupied M sockets Plastic protective caps for M1 sockets (-pc. pkg.) pc. perforated unprinted marker strip for SACBPUR/SC boxes pc. perforated unprinted marker strips for SACB- boxes -position -position These plastic connectors offer IP protection. The double plug can be used with the double-occupied sockets on the boxes above, as initiater cables can be inserted via the PG cable gland. Nominal voltage: 0 VAC, VDC Mfr. s Type SACC-M1MS-CON-PG-M SACC-M1MS-CON-PG-M SACC-M1MS-CON-PG SACC-M1MR-CON-PG-M SACC-M1MR-CON-PG SACC-M1MS-CON-PG-DUO SACC-M1FS-CON-PG SACC-M1FS-CON-PG-M SACC-M1FR-CON-PG Order No Plug, straight Plug, angled No. of Pins Double-plug Socket, straight Socket, angled Cable Length m m m m m m m m m m m m m m m m M 1 Sensor/Actuator Plugs and Sockets Description Sensor/Actuator Boxes with Quick Connection System Quickon Dimensions L W H W/metal knurl W/metal knurl W/plastic knurl W/metal knurl W/plastic knurl straight w/plastic knurl W/plastic knurl W/metal knurl W/plastic knurl No. of Pins SACBQPUR Mfr. s Type SACB-Q/P-L-.0 PUR SACB-Q/P-L-.0 PUR SACB-Q/P-L-.0 PUR SACB-Q/P-L-.0 PUR SACB-Q/P-L-.0 PUR SACB-Q/P-L-.0 PUR SACB-Q/P-L-SC SACB-Q/P-L-SC SACB-Q/P-L-SC QPROT SACBQSC 1 0 These boxes have the same features as the ones listed above except they feature the QUICKON quick connection system. Simply remove the cable sheath (approx. 1 mm), slide on the union nut, the cap and rubber seal, insert the conductor ends into the feed though of the splice ring (labeled 1,, and ) and cut off the projecting ends. Next, insert the splice ring into the contact carrier and tighten the union nut that creates the contact and strain relief when tightened, without any extra tools or stripping of the conductors. Protective caps are available for unused sockets. Marker strips ZBN 1: unprinted are included. Protection type: IP. Nominal/max. voltage: /0 VDC. Description Sensor/actuator box w/master cable, -position QUICKON connections Sensor/actuator box w/spring cage terminal blocks and -position QUICKON connections Plastic protective caps for QC sockets ( pc. pkg.) No. of Sockets No. of Pins Cable Length mm mm mm mm mm mm Dimensions L W H

26 Mfr. s Type & Features of the INTERBUS ST Module Bus Terminal Modules - Copper and Fiber Optic IBS ST BKM-T 01 IBS ST BK-T 1 IBS ST BK RB-T 0 IBS ST BK LB-T IBS ST BK DIO //-T IBS ST BKM-LK 0 IBS ST BK-LK IBS ST BK DIO //-LK IBS ST BK RB-T DIO //-LK IBS ST BK RB-LK DIO //-LK ST Local Bus Cable Storage Area (typical both sides) DIN-Rail Release Tab Optional Wire Termination Markers (typical) Insertion Bridge Bar Groove Metal Grounding Strap Base Terminal Block Unit Wire Entry Hole (typical) Pullout Marking ST Local Bus Field Cable Assembly Fig. 1 0A00 Description DIN-rail (not supplied) Access Hole for Wire Clamp Screw (typical) ST Local Bus Cable Locking Clips (typical both sides) Keying Tab (typical) Positive Latch Diagnostics LED Bank (red & green) Module Identification Status LED Bank (amber) Pluggable Electronic Module Bus Terminal Module with fixed electronics: copper remote bus, COMBICON remote bus connection. Bus Terminal Module: copper remote bus, -pin D-Sub remote bus connection. Bus Terminal Module: copper remote bus, -pin D-Sub remote bus connection, -pin branch remote bus connection. Bus Terminal Module: copper remote bus, -pin D-Sub remote bus connection, plus an additional 1-pin D-Sub local bus connection. Bus Terminal Module with I/O: copper remote bus, -pin D-Sub remote bus connection, FLK connection. Bus Terminal Module with fixed electronics: fiber optic remote bus, FSMAremote bus connection. Bus Terminal Module: fiber optic remote bus, FSMAremote bus connection. Bus Terminal Module with I/O: fiber optic remote bus, FSMA remote bus connection, FLK connection. Bus Terminal Module with I/O: fiber optic remote bus, FSMA remote bus connection, -pin branch remote bus connection, FLK connection. Bus Terminal Module with I/O: fiber optic remote bus, FSMAremote bus connection, FSMAbranch remote bus connection, FLK connection. Interbus INTERBUS ST The INTERBUS ST (Smart Terminal Block) family of products is a compact class of I/O modules that communicates over an INTERBUS sensor/actuator network. Components and assemblies that make up the module are identified in Figure 1. The three main structural components are the DIN-rail mounted base terminal block unit, pluggable electronics module and the STlocal bus cable assembly. The base terminal block unit contains the wire-clamp assemblies, connectors and fuses. The electronics module contains all the actual circuitry. Not Applicable Not applicable Not Applicable Not Applicable I/O Data inputs:, ma, 1ms filter. outputs:, 0. A. Not Applicable Not Applicable inputs:, ma, 1ms filter. outputs:, 0. A. inputs: VDC, ma, ms filter outputs:, 0. A. inputs:, ma, ms filter. outputs:, 0. A. Analog Input Modules IB ST BAI /U 1 IB ST BAI /SF 1 IB ST AI /SF 0 IB ST AI /SF 0 IB ST BAI /BP IB ST AI /BP IB ST AI /I 1 IB ST BAI /I IB ST PT 0 / IB ST UTH 0 IB ST BAI /U-MV Analog Input Module:, voltage inputs (single ended). Analog Input Module:, voltage or current inputs (differential). Analog Input Module:, voltage or current inputs (differential). Analog Input Module:, voltage or current inputs (differential). Analog Input Module:, voltage or current inputs (differential). Analog Input Module:, voltage or current inputs (differential). Analog Input Module:, voltage or current inputs (differential and isolated per channel). Analog Input Module:, current inputs (single ended). Analog Input Module:, RTD inputs. Analog Input Module:, thermocouple inputs. Analog Input Module:, voltage inputs (single ended). Configurable per channel. Voltage ranges: 0 to + VDC, 0 to + VDC, 0 to + VDC, 0 to +0 VDC, - or 1- bit resolution modes ( or. mv/step). Voltages range: 0 to + VDC (. mv/step). Current ranges: 0 to +0 ma(. µa/step), + to +0 m A (.1 µa/step). 1-bit resolution. Voltage range: 0 to + VDC (. mv/step). Current ranges: 0 to +0 ma(. µa/step). 1-bit r e s o l u t i o n. Voltage range: 0 to + VDC (. mv/step). Current ranges: + to +0 ma(.1µa/step). 1-bit r e s o l u t i o n. Voltage range: - to + VDC (. mv/step). Current ranges: -0 to +0 ma(. µa/step). 1- bit r e s o l u t i o n. Voltage range: - to + VDC (. mv/step). Current ranges: + to +0 ma(.1 µa/step). 1- bit r e s o l u t i o n. Configurable per channel. Voltage: 0 to + VDC (. mv/step). Current: 0 to +0 ma(. µa/step), + to +0 ma(.1 µa/step). 1- bit resolution. Configurable per channel. Current ranges: 0 to +0 ma, + to +0 ma, 0 to +0 ma, 0 to +0 ma, -bit (. µa/step) or 1- bit (. µa/step) resolution. Measuring range: -.1 to +. o C or -. to +. o F. -bit resolution: 0.1 o C or 0.1 K for Celsius, 0.1 o F or 0.0 K for Fahrenheit. J- or K-type thermocouples. -bit resolution. Configurable per channel. Voltage ranges: 0 to +0, 0 to +00, 0 to +00 mvdc. Also 0 to +1 VDC. Resolution: - or 1- bit (1. or. µv/step). (Continued on

27 Modules Module Family Process understanding is the key to choosing the correct I/O modules. The ST table below is organized to help you find the modules that meet your control needs. After choosing those modules that meet your current and future requirements, you will have to determine the complimentary products and accessories needed to complete your system. A list of accessories is provided with each module data sheet. Data sheets are available for most modules and may be obtained through Phoenix Contact s FAX-ON-DEMAND system ( ) or calling Carlton-Bates. Connection Data:AWG -1. Operating Temperature: 0 to + o C. Wide temperature range modules (-0 o to + o C) are available upon request. Features Electronics packaged in a removable module Pullout marking field for channel identification on most modules Optional wire termination markers available. Screw-clamp terminations for both module power and I/O power. Spring-clamp terminations are available for most modules upon request. Electrical isolation IP0 housing rating I/O modules accept, - or -wire I/O devices, depending on module type I/O modules have from to I/O points depending on module type. local bus can support up to I/O points local bus can support both digital and analog signals Diagnostic and status LEDs on each module Module diagnostics over INTER- BUS network. Features Power Requirements Local Bus Current Dimensions W x H x D Slim design. Network connectors included. Supports up to four ST local bus I/O modules (observe local bus current capacity). Alarm output. Reconfiguration input. Supports up to eight ST local bus I/O modules (observe local bus current capacity). Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules (observe local bus current capacity). Provides two remote bus outputs. Alarm output. Reconfiguration input. Supports up to eight STor Flat Pack local bus I/O modules (observe local bus current capacity). Reconfiguration input. Supports up to four ST local bus I/O modules (observe local bus current capacity). Accepts two- and three-wire I/O devices. Slim design. Supports up to four STlocal bus I/O modules (observe local bus current capacity). Electrical isolation between communication and supply voltage. Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules (observe local bus current capacity), Reconfiguration input. Supports up to four ST local bus I/O modules (observe local bus current capacity). Accepts two- and three-wire I/O devices. Reconfiguration input. Supports up to four ST local bus I/O modules (observe local bus current capacity). Accepts two- and three-wire devices. Provides two remote bus outputs. Reconfiguration input. Supports up to four ST local bus I/O modules (observe local bus current capacity). Accepts two-and three-wire I/O devices. Provides two remote bus outputs. 0 mamax. 0 mamax. 0 mamax. 0 mamax. 0 mamax. 00 mamax. 0 mamax. 0 mamax. 00 mamax. 00 mamax. 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply 00 mamax. supply x 1 x 1 x 1 x 1 x 1 x 1 x 1 x x 1 x 1 x 1 x Process data update time: 0 µs/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. matyp. (no passive sensors) 0 matyp. (at max. load) 1 mamax. draw (mm.00 Process data update time: 0. ms/channel. mamax. draw 1 x 1 x 0.00 Process data update time:.0 ms/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. Process data update time: 0. ms/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. 1 matyp. (no passive sensors) 00 matyp. (at max. load) 1 matyp. (no passive sensors) 00 matyp. (at max. load) mamax. draw mamax. draw Process data update time: 0. ms/channel. mamax. draw 1 x 1 x 0.00 Process data update time: 1 ms/channel. Fault indication: failure of + V I/O supply voltage, failure of +1 V or + V I/O voltage, blown fuse at I/O supply voltage. 1 matyp. (no passive sensors) 00 matyp. (at max. load) mamax. draw x 1x.00 Process data update time: 0. ms/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. 0 mamax. 0 mamax. draw.00 Process data update time: 0. ms/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. matyp. (no passive sensors) 0 ma(at max. load) mamax. draw 0.00 Process data update time: ms/channel. mamax. 0 mamax. draw 0.00 Process data update time: s/channel. mamax. mamax. draw Process data update time: 0 µs/channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. next page) matyp. (no passive sensors) 0 matyp. (at max. load) 1 mamax. draw.00

28 Mfr. s Type & Digital Input Modules IB ST DI / IB ST BDI / 00 IB ST BDI / 010 IB ST DI / IB ST DI / 1 IB ST DI / 1 IB ST 0 DI / Description Digital Input Module:, inputs. Accepts two-wire I/O devices. Digital Input Module:, inputs. Accepts two-, three-, and four- wire I/O devices. Digital Input Module:, inputs. Accepts two-, three-, and four- wire I/O devices. Digital Input Module:, inputs. Accepts two-, three-, and four- wire I/O devices Digital Input Module: VDC, inputs. Accepts two- wire I/O devices. Digital Input Module: VAC, inputs. Accepts two- and threewire I/O devices. Digital Input Module: 0 VAC, inputs. Accepts two- and threewire I/O devices. Interbus I/O Data inputs,, ma, ms filter inputs,, ma, 0 ms filter inputs,, ma, 0 ms filter inputs,, ma, ms filter inputs, VDC, ma, ms filter inputs, VAC,. ma, 0 ms filter inputs, 0 VAC, ma, 0 ms filter INTERBUS ST Digital Input and Output Modules IB ST DIO //-A 0 IB ST DIO //-A-S IB ST DIO /R/ 1 Digital Input/Output Module:, inputs, outputs. Accepts three-wire I/O devices. Digital Input/Output Module:, inputs, outputs with output logic control. Accepts three- wire I/O devices. Digital Input/Output Module:, inputs, relay outputs (SPDT). Accepts three- wire I/O devices. inputs:, ma, ms filter. outputs:,.0 A. inputs:, ma, ms filter. outputs:,.0 A. inputs:, ma, ms filter. relay outputs (SPDT): up to 0 VAC and.0 A. Digital Output Modules IB ST BDO / 0 IB ST DO / IB ST BDO / 0 IB ST BDO /-0 0 IB ST BDO /-00 1 IB ST DO / 1 IB ST DO R/S 1 IB ST DO /-A 1 IB ST /0 DO /-1A 1 Analog Output Modules IB ST BAO /U-B 1 IB ST AO /BP 1 IB ST BAO /U IB ST AO /SF 1 IB ST AO /SF 0 Special Function modules IB ST V. 0 IB ST CNT 000 IB ST INC/ 1 Digital Output Module:, outputs. Accepts two- wire I/O devices. Digital Output Module:, outputs. Accepts two- wire I/O devices. Digital Output Module:, outputs. Accepts two- and threewire I/O devices. Digital Output Module:, outputs. Accepts two- and threewire I/O devices. Digital Output Module:, outputs. Accepts two- and threewire I/O devices. Digital Output Module:, outputs. Accepts two- and threewire I/O devices. Digital Output Module:, relay outputs (SPST). Accepts two- and three- wire I/O devices. Digital Output Module:, outputs. Accepts two- and threewire I/O devices. Digital Output Module: or 0 VAC, outputs. Accepts twoand three- wire I/O devices. Analog Output Module:, voltage outputs. Analog Output Module:, voltage outputs. Analog Output Module:, voltage outputs. Analog Output Module:, voltage or current outputs. Analog Output Module:, voltage or current outputs. RS-/V. Communication Module Counter Modules with Counters Two-channel Positioning Module outputs:, 0. A. outputs:, 0. A. outputs:, 0. A. outputs:, 0. A. outputs:, 0. A. outputs:, 0. A. relay outputs (SPST): up to 0 VAC and.0 A. outputs:,.0 A. outputs: or 0 VAC, 1.0 A. Voltage range: 0 to + VDC ( mv/step), - bit resolution. Voltage range: - to + VDC (. mv/step), 1- bit resolution Voltage range: - to + VDC (. mv/step) or - 1 to +1 VDC (. mv/step). 1- bit resolution. Voltage range: 0 to + VDC (. mv/step). Current range: 0 to +0 ma(. µa/step). 1 bitresolution. Voltage range: 0 to + VDC (. mv/step). Current range: + to +0 ma(.1 µa/step). 1- bit resolution. Configurable baud rate (1 to 100) via PCP channel. - bit resolution, pulse generator.01 to khz. Measuring range: 0 to 0 khz (typ), 0 to 00 khz (with one channel in use). Incremental encoder inputs: 0 to khz ( V signals), 0 to 00 khz (V signals). Refer to module data sheet no. 01 for more information.

29 Modules Module Family (continued) Features Power Requirements Local Bus Current Dimensions (W x H x D) One isolated group. Fault indication: failure of + V I/O supply voltage One isolated group. Fault indication: failure of + V I/O supply voltage, blown fuse at I/O supply voltage One isolated group. Fault indication: failure of + V I/O supply voltage failure, blown fuse at I/O supply voltage Four isolated groups. Fault indication: failure of + V I/O supply voltage, short circuit or overload of initiator supply voltage, over-temperature of an output driver. One isolated group. One isolated group. One isolated group..0 A 00 ma 1.0A 00 ma VDC VAC 1.0A 0 VAC 0 mamax. draw 0 ma max. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 1 x 1 x Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse in isolated group is OK). Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse in isolated group is OK). A max. A max. 0 mamax. draw 0 mamax. draw 0 mamax. draw One isolated group. Electronic over-circuit protection per group of four channels. Fault indication: short circuit or overload of an output. Four isolated groups. Electronic over-circuit protection per point. Fault indication: short circuit or overload of an output, over temperature of an output driver. One isolated group. Electronic over-circuit protection per point. Fault indication: short circuit of an output. One isolated group. Electronic over-circuit protection per group of four channels. One isolated group. Electronic over-circuit protection per group of four channels. Four isolated groups. Electronics over-circuit protection per point. Fault indication: short circuit of an output. Four isolated groups. Two isolated groups. Electronic over-circuit protection per point. Fault indication: short circuit of an output. Two isolated groups. A max. A max. 1. A max.. A max. A max. A max. A max. oe 0 VAC A max. 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 0 mamax. draw 1 x 1 x 1 x 1 x Process data uptime:. ms per channel. Fault indication: failure of + V I/O supply voltage, failure of a ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. Process data update time: 1 ms per channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. Process data update time: ms per channel. Fault indication: failure of + I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. 0 mamax. 0.1 A max. 0 mamax. mamax. draw mamax. draw mamax. draw Process data update time: 1 ms per channel. Fault indication: failure of + I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. 0. A max. mamax. draw.00 Process data update time: 1 ms per channel. Fault indication: failure of + V I/O supply voltage, failure of ±1 V or + V I/O voltage, blown fuse at I/O supply voltage. 0. A max. mamax. draw.00 PCPsupported. R-mode supported. k byte buffer in send/receive direction. 00 matypical mamax. draw x 1 x.00 PCP supported. Refer to module data sheet no. 01 for further details. Fault indication: failure of + V I/O supply voltage, blown fuse at I/O supply voltage. A max. 0 mamax. draw PCP supported. Refer to module data sheet no. 01 for further details. 0 mamax. draw 10.00

30 INTERBUS Inline System INTERBUS Inline Station 1 INTERBUS Inline Components System diagnostics LED and status LED Zach strip labeling C o n n e c t i o n D a t a :s p r i n g clamps AWG: - Snap-on labeling field I/O connector Legend 1 Bus Terminal Remote Bus Branch Terminal Segment Terminal I/O Modules Power Terminal Loop Branch Terminal The information on this page is an overview of the components in an Inline Automation Station. Detailed information is contained in data sheets for the listed terminals or in the user manual INTERBUS Inline System Manual (order no. 0). Data sheets may be obtained through Phoenix Contact s FAX-0N-DEMAND System (00--01) or by calling Carlton-Bates Company. The INTERBUS Inline product family is a modular automation system that is integrated into an INTERBUS system. Inline modules are joined together to create functional units which meet the requirements of the application. The control cabinet layout is designed by grouping the various I/O modules according to function. Both communication and power routing is accomplished automatically with the physical interconnection between the I/O modules. Additional networking options permit the network to branch to either a remote bus segment or Loop segment. Bus Terminals can accommodate up to modules. A copper cable is used to couple it to INTERBUS, DeviceNet or Profibus networks.a Remote Bus Branch Terminal is used for creating a remote bus branch and can only be inserted directly after the bus terminal. A Loop Branch Terminal is used to extend the Inline station via a Loop segment. It is recommended that a Loop branch terminal module be electrically isolated from the other Inline station components via a power terminal (IRILPWRIN). I/O voltage is supplied to the I/O module via the integrated power bus built into each of the I/O modules. Segment Terminals provide the ability to segment this I/O power for an individual module or group of I/O modules. Note that the maximum current allowed through the integrated power bus is amps. The Power Terminals provide power to the I/O circuit and allows electrical isolation. Power Terminals are also used when the current of the integrated power bus could exceed amps. Approvals: ULRecognized (U.S. and Canada). Terminal Modules (connectors must be ordered separately) Mfr. s Type Description INTERBUS data routing Communications power routing Potential routing Use Connector Type Module Height: 1. mm Length: 1.1 mm (.1mm w/extended connector) Width IBSIL BK-T IBIL BK-RB-T IBIL L IBIL SEG IBIL SEG/F IBIL PWRIN IBIL DI IBIL DI IBIL DI IBIL DI IBIL DO-A IBIL DO IBIL DO IBIL D0 IBILAI/SF IBILAO1/U/SF IBILAO1/SF IBILTEMPUTH IBIL TEMPRTD Connectors and Accessories INTERBUS Bus terminal, Remote bus branch terminal, Loop branch terminal, Segment terminal,, without fuse Segment terminal,, with. A fuse Power terminal, Digital input terminal, -inputs,, -wire connection (PNPsensor) Digital input terminal, -inputs,, -wire connection (PNPsensor) Digital input terminal, -inputs,, -wire connection (PNPsensor) Digital input terminal, -inputs,, -wire connection (PNPsensor) Digital output terminal, -outputs,, A, -wire connection Digital output terminal, -outputs,, 00 ma, -wire connection Digital output terminal, -outputs,, 00 ma, -wire connection Digital output terminal, -outputs,, 00 ma, -wire connection Analog input terminal, -inputs, 0 to 0 ma, to 0 ma, -0 to +0 ma, 0 to V, - to + V, -wire connection Analog output terminal, 1 output, 0 to V, - wire connection Analog output terminal, 1 output, 0 to 0 ma, to 0 ma, 0 to V, -wire connection Thermocouple terminal, inputs, - wire connection RTD terminal, inputs, -, - or - wire connections Connector Mfr. s Type Type Description IBILBK-PLSET IBILSCN-SHIELD IBILSCN--CP IBILSCN- IBILSCN-PWRIN-CP IBILSCN-PWRIN IBILSCN-1-ICP IBILSCN-1 IBILSCN-1-OCP IBILFIELD IBILFIELD ZBFM Connector set (-connectors: -shielded,1-standard,1-power, black) I/O shielded connector I/O standard connector. color coded* I/O standard connector, without color code Power connector, black, color coded* Power connector, black, without color code I/O extended double signal connector, color coded** I/O extended double signal connector, without color code I/O extended double signal connector, color coded Labeling field for terminals with 1. mm or. mm widths Labeling field for terminals with. mm widths 1 (-required) or or or or or or (-required) or (-required) or or or (-required) or (-required) or or or or or 0 pc. marker sheet, several versions available (to order, see Accessories for Terminal Blocks ) *Color codes for standard and power connectors (1st row: w/o color print, nd row: red, rd row: blue, th row: green/yellow). **Color codes for extended -ICP connectors (1st row: w/o color print (signals), nd row: red, rd row: blue, th row: w/o color print (signals), th row: red, th row: blue). Color codes for extended -OCP connectors (1st row: w/o color print (signals), nd row: blue, rd row: green/yellow, th row: w/o color print (signals), th row: blue, th row: green/yellow).

31 INTERBUS Loop System The information on this page is an overview of the components that make up the Loop product family. Detailed information is contained in data sheets or in the INTERBUS Loop System Manual (order no. 1). Data sheets may be obtained from either Phoenix Contact s Website INLINEIO.com, FAX- ON-DEMAND System (00--01) or by calling Carlton-Bates. Legend 1 Field Mountable Bus Terminal Machine Mountable I/O Modules Analog Digital Temperature Machine Mountable Motor Starter Power Distribution Module with Digital Inputs INTERBUS Loop products combine user data signals with power for bus devices and transmit both signals through an unshielded -wire cable. Additionally, INTERBUS Loop modules with IP protection, can be directly integrated into an Inline station by means of a branch terminal. Circuits are displayed with built-in diagnostic LED s and all modules use the solderless QUICKON connectors, eliminating the need for tools and striping of the conductors. The machine mountable Bus Terminal can support up to devices. In the event the minimum voltage for a device (1.V) is not achievable or the maximum current load (1. A) is exceeded, the Power In Module should be used to re-establish these power requirements. The Inline Loop Branch Terminal permits a seamless integration of the Loop product offering into an Inline station. Approvals: ULRecognized (U.S. and Canada). Fig. 1 System Parameters Cable length between devices m (. ft) max. Cable length in a loop m (. ft) max. Current load in a loop A max. Voltage on a device V min. Number of devices in a loop max. Loop Components Mfr. s Type Fig. Description Legend 1. Bus terminal. Loop network cable. Loop actuator supply cable. Cable gland set ( x PG) Fig. Fig. Fig. IBSLIPBK-T IBLBOXPWRINDI/-M1 IBILL IBLBOXDI/M1 IBLBOXDI/M1-D IBLBOXDI/M1 IBLBOXDO/M1-A IBLBOXDO/M1-A-D IBLBOXDIO//M1-A IBLBOXDIO//M1-A-D IBLBOXAI/M1 IBLBOXAO1//UM1 IBLBOXAO1//IM1 IBLBOXTEMP/M1 IBLIP00MLR-A * Bus terminal with Loop branch (data sheet 0) Power in module w/ digital inputs,, - wire, connection for additional power supply (data sheet 1) Inline Loop branch terminal, (data sheet ) Digital input module, - inputs,, -wire (data sheet 0) Same as above with internally cross-wired inputs (data sheet ) Digital input module, - inputs,, - wire (data sheet ) Digital output module, - outputs,, A, - wire (data sheet 1) Same as above with internally cross-wired outputs (data sheet ) Digital I/O module, -inputs,, - wire; - outputs,, A, -wire (data sheet ) Same as above with internally, cross-wired inputs and outputs (data sheet 0) Analog input module, - inputs, 0- VDC, - VDC, 0-0 ma, -0 ma, - wire (data sheet ) Analog output module, 1- output, - VDC to + VDC, - wire (data sheet ) Analog output module, 1- output, 0-0 ma, -0 ma, - wire (call for data sheet) Analog input thermocouple/rtd module, -inputs, RTD, TC,, and - conductor sensors, - wire (data sheet ) Motor starter, machine mounted, - channels, 00 VAC, A (call for data sheet) *not shown. For information on this product see INTERBUS Inline System. Fig. Accessories Mfr. s Type Description Legend 1- Loop - Loop network cable - Loop connector set IBSLSLCCU/1.-METER IBSLPSCCU/1.-METER IBSINBCMETER SABCG/PG IBSIPPROTI/O IBSLMLRPLSET-A Loop network cable, green, -cond., AWG (priced per meter) Loop actuator supply cable, black, - cond., AWG (priced per meter) INTERBUS network with power cable (priced per meter) Cable gland set (PG), threaded, for INTERBUS connections on Loop bus terminal ( pcs./pkg.) Protective caps for unused M1 sockets Loop connector set (includes PG glands) for motor starter 1. 0 / m t r. 0 / m t r.. 0 / m t r.. / m t r