NA1FC7T. Fuse holder terminal blocks

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "NA1FC7T. Fuse holder terminal blocks"

Transcription

1 NAFC7T 00 Fuse holder terminal blocks

2 T Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.SF... Spacing 8 mm (.5") M 4/8.SFT Standard 8 mm block. M 4/8.SF equipped with two test sockets DIA. mm/.079". End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section M 4/ * Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required. ** Terminal block with low temperature surfacing : Storage -60 C Use -0 C Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. Block matching fuse terminal block M 4/8.SF for line, fuse applications, see page 7. Part number End section grey orange beige Test plug Comb type jumper bar 5 A 4 IDC jumper 5 Assembly rod 6 Assembly ring 7 Fuses 5 x 0 mm 50 V Fuses 5 x 5 mm 50 V Fast fusion HPC 500 A 8 Disconnect link bar Color Color Grey Grey ** Orange Beige V0 / Gauge M 4/8.SF M 4/8.SF.TS M 4/8.SF M 4/8.SF.V NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG 60 V () 600 V () 50 V 8 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().7".57" Ib.in NEMA FEM8S V th.,5 mm FEM8S V th.,5 mm FEM8S V0 th.,5 mm PC8 0 poles AD, TGA8 poles poles poles ANT FU50 5 x 0 0,5 A A A ,5 A A A FU55 5 x 5,6 A A ,5 A A , A CN Grey Beige V0 M 4/8.SFT M 4/8.SFT.V NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG 400 V () 600 V () 50 V 4 kv 6, A 6, A 0 A / Gauge 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().7".57" Ib.in NEMA FEM8S V th.,5 mm FEM8S V th.,5 mm FEM8S V0 th.,5 mm FC DIA. mm PC8 0 poles AD,5 DIA. mm TGA8 poles poles poles ANT FU50 5 x 0 0,5 A A A ,5 A A A FU55 5 x 5,6 A A ,5 A A , A CN See section on markers marking method 6 C60 on grip 7 C80 on side 6 C60 on grip 7 C80 on side Note : () Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. () Protection index for closed block. 4

3 T M 4/8.SF... M 4/8.SF...T... M 4/8.SN... Spacing 8 mm (.5") Spacing 8 mm (.5") Spacing 8 mm (.5") M 4/8.SF with blown fuse indicator. Grey body. M 4/8.SF with blown fuse indicator equipped with test sockets DIA. mm/.079". Grey body. M 4/8.SF with disconnect link bar locked on grey grip. Color Neon lamp() Diode LED 4 V* (4) Diode LED 48 V* (4) M 4/8.SFL M 4/8.SFD M 4/8.SFD Diode LED 48 V (4)(5) M 4/8.SFD NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG Color Neon lamp() Diode LED 4 V* (4) Diode LED 48 V* (4) M 4/8.SFLT M 4/8.SFDT M 4/8.SFDT NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG Color Grey Orange Beige V0 M 4/8.SN M 4/8.SN M 4/8.SN.V NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG / Gauge 400 V () 600 V () 50 V 4 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().74".57" Ib.in NEMA FEM8S V th.,5 mm FEM8S V th.,5 mm FEM8S V0 th.,5 mm PC8 5 A 0 poles AD,5 4 A TGA8 poles poles poles ANT FU50 5 x 0 0,5 A A A ,5 A A A FU55 5 x 5,6 A A ,5 A A , A / Gauge 400 V () 600 V () 50 V 4 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().74".57" Ib.in NEMA FEM8S V th.,5 mm FEM8S V th.,5 mm FEM8S V0 th.,5 mm FC DIA. mm PC8 5 A 0 poles AD,5 4 A TGA8 poles poles poles ANT FU50 5 x 0 0,5 A A A ,5 A A A FU55 5 x 5,6 A A ,5 A A , A / Gauge 60 V 600 V 50 V 8 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().74".57" Ib.in NEMA FEM8S V th.,5 mm FEM8S V th.,5 mm FEM8S V0 th.,5 mm PC8 5 A 0 poles AD,5 4 A TGA8 poles poles poles ANT C60 on grip 7 C80 on side 6 C60 on grip 7 C80 on side 6 C60 on grip 7 C80 on side Note : () Blown fuse indicator : neon lamp 0-0 V. Leakage current with neon lamp : < 0,5 ma (0 V) / < 0,7 ma (0 V). (4) Leakage current with LED 4 or 48 V : < 4,5 ma. (5) Block delivered with - on open side. 5

4 T Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.SN Spacing 8 mm (.5") M 4/8.SNT M 4/8.SF with disconnect link bar locked on blue grip. M 4/8.SF with disconnect link bar locked on blue grip, equipped with test sockets DIA. mm/.079". Color Grey body/blue grip Beige body/blue V0 grip M 4/8.SN M 4/8.SN.V Color Grey body/blue grip Beige body/blue V0 grip M 4/8.SNT M 4/8.SNT.V End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. Block matching fuse terminal block M 4/8.SF for line, fuse applications, see page 7. Part number M 4/ / Gauge NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG 60 V () 600 V () 50 V 8 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().7".57" Ib.in NEMA NFC DIN 0,5-4 mm² - AWG 4- AWG 0,5-4 mm² - AWG 4- AWG 400 V () 600 V () 50 V 4 kv 6, A 0 A 0 A / Gauge 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0 ().7".57" Ib.in NEMA End section grey FEM8S V th.,5 mm FEM8S V th.,5 mm orange FEM8S V th.,5 mm FEM8S V th.,5 mm beige FEM8S V0 th.,5 mm FEM8S V0 th.,5 mm Test plug FC DIA. mm Comb-type jumper bar 5 A PC8 5 A 0 poles PC8 5 A 0 poles IDC jumper AD,5 4 A AD,5 4 A Assembly rod TGA8 poles TGA8 poles poles poles poles poles Assembly ring ANT ANT See section on markers marking method 6 C60 on lever 7 C80 on side 6 C60 on lever 7 C80 on side Note : () Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. () Protection index given for closed block. 6

5 T Standard terminal blocks Compression clamp DIN - Spacing 8 mm (.5") M 4/8 Note: For terminal block with matching profile to fuse block M 4/8.SF, use M 4/8 shown here. Terminal block compatible with fuse block M 4/8.SF Color Part number Grey M 4/ End stop th. 9 mm BADL V End stop th. 9, mm BAM ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 x,5 PZ Other end stops and rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. 4 End section grey Separator end section grey beige Protective cover 4 Test socket 5 Test plug 6 Comb type jumper bar 5 A 7 IDC jumper / Gauge NFC DIN UL CSA 0,-4 mm² - AWG 0,-4 mm² - AWG 500 V Gr.C 600 V 6 A 5 A 4 mm² / A4 AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0.7".6" lb.in NEMA FEM8S th.,5 mm SCFCV th.,0 mm SCFCV V0() V0 th.,0 mm CPV (for SCFCV...) AL DIA.,0 mm AL DIA.,0 mm FC DIA. mm PC8 0 poles AD, See section on markers marking method Note : () End sections and circuit separators snapped on rails. 7

6 T Fuse holder terminal blocks Double-deck for 5 x 0 and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing 8 mm (.5") M 4/8.D.SF Spacing 8 mm (.5") M 4/8.D.SF... Standard block. M 4/8.D.SF with blown fuse indicator. Grey body. Color Color Grey Beige V0 M 4/8.D.SF M 4/8.D.SF.V Neon lamp0-0 V (5) LED 4 V (6) LED 48 V (6) M 4/8.D.SFL M 4/8.D.SFD M 4/8.D.SFD End stop th. 9, mm BAMH Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. * Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required , 9 / Gauge NFC DIN 0,5-4 mm² 4- AWG 4- AWG 0,5-4 mm² 4- AWG 4- AWG 60 V (7) 00 V () 50 V 8 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0.7".6" Ib.in End section grey FEM8DS (V) FEM8DS (V0) Test socket AL () DIA. mm AL () DIA. mm AL4 () DIA. 4 mm Test plug FC () DIA. mm FC4 (4) DIA. 4 mm Assembled BJM8 () 4 A jumper bar BJM8 () 4 A (without IP 0 protection) BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A Connector plate EL6 5 A Comb-type jumper bar PC8 5 A 0 poles IDC jumper AD,5 4 A Assembly rod TGA8 poles poles poles Assembly ring ANT Fuse 5 x 0 mm 50 V FU50 0,5 A A A ,5 A A Fuse 5 x 5 mm 50 V FU55,6 A Fast acting HPC 500 A A ,5 A A , A Disconnect link bar CN Shield connector CBDS NFC DIN 0,5-4 mm² 4- AWG 4- AWG 0,5-4 mm² 4- AWG 4- AWG 500 V (7) 00 V () 50 V 6 kv 6, A 0 A 0 A / Gauge 4 mm² / A4 AWG AWG Wire stripping ecomm. ecomm. Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0.7".6" Ib.in FEM8DS AL () DIA. mm AL () DIA. mm AL4 () DIA. 4 mm FC () DIA. mm FC4 (4) DIA. 4 mm BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A EL6 5 A PC8 5 A 0 poles AD,5 4 A TGA8 poles poles poles ANT FU50 0,5 A A A ,5 A A FU55,6 A A ,5 A A , A CBDS See section on markers marking method 6 C 60 on grip 7 C 80 on side 6 C 60 on grip 7 C 80 on side Note : () Only for lower deck. () Only for upper connection. Use of these accessories requires the user to cut out the partition. () For block equipped with test socket AL. (4) For block equipped with test socket AL4. (5) Leakage current with neon lamp : < 0,5 ma (0 VAC), < 0,7 ma (0 VAC). (6) Leakage current with LED 4 or 48 VDC < 4,5 ma. (7) Insulation voltage of terminal block - operating voltage : in accordance with fuse rating.

7 T Fuse holder terminal blocks Double-deck for 5 x 0 and 5 x 5 mm fuses Compression clamp DIN - DIN With or without blown fuse indicator. Spacing 8 mm (.5") M 4/8.D.SF... Spacing 8 mm (.5") M 4/8.D Note: For terminal block with matching profile to fuse block M 4/8.D.SF, use M 4/8.D shown here. M 4/8.D.SF with* or without blown fuse indicator. Internal jumpering option. Grey body. Terminal block compatible with fuse block M 4/8.D.SF Color Color End stop th. 9, mm BAMH Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. * Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required , 0 5 7, 8 End section grey Test socket Test plug 4 Assembled jumper bar (without IP 0 protection) 5 Connector plate 6 Comb-type jumper bar 7 Assembly rod 8 Assembly ring 9 Fuse 5 x 0 mm 50 V Fuse 5 x 5 mm 50 V Fast acting HPC 500 A 0 Disconnect link bar Shield connector Jumper bar not assembled Screw for BJS Grey M 4/8.D.SFJ Blocks with blown fuse indicator : Neon lamp 0-0 V* (5) LED 4 V* (6) LED 48 V* (6) / Gauge M 4/8.D.SFLJ M 4/8.D.SFDJ M 4/8.D.SFDJ NFC DIN 0,5-4 mm² 4- AWG 4- AWG 0,5-4 mm² 4- AWG 4- AWG 500 V (7) 00 V (7) 50 V 6 kv 6, A 0 A 0 A 4 mm² / A4 AWG AWG Wire stripping ecommended ecommended Protection 9,5 mm 4 mm 0,5-0,8 Nm IP 0.74".57" Ib.in FEM8DS AL () DIA. mm AL () DIA. mm AL4 () DIA. 4 mm FC () DIA. mm FC4 (4) DIA. 4 mm BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A BJM8 () 4 A EL6 5 A PC8 5 A 0 poles TGA8 poles poles poles ANT FU50 0,5 A A A ,5 A A FU55,6 A A ,5 A A , A CN CBDS BJS8 () 4 A 0 poles EV VJS () Grey M 4/8.D All characteristics are equal to the M 4/8.D.SF NFC DIN Wire stripping ecommended ecommended Protection See markers section method 6 C 60 on lever 7 C 80 on side Note : () These accessories can be used on the lower connection only. () These accessories can be used on the upper connection only. Use of these accessories requires the user to cut out the partition. () For block equipped with test socket AL. (4) For block equipped with test socket AL4. (5) Leakage current with neon lamp: < 0,5 ma (0 VAC), < 0,7 ma (0 VAC). (6) Leakage current with LED 4 or 48 VDC : < 4,5 ma. (7) Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. 9

8 T Fuse holder terminal block with screwed plug for 5 x 0 mm or 5 x 5 mm fuses Compression clamp DIN - DIN Spacing mm (.47") MB 0/.SF... mm block, no blown fuse indicator - for 5 x 0 mm or 5 x 5 mm fuses Color Grey/5x0 mm Grey/5x5 mm MB 0/.SF MB 0/.SF End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. 4 End section grey Standard jumper bar 57 A IDC jumper 4 Fuse 5 x 0 mm 50 V Fuse 5 x 5 mm 50 V Fast acting HPC 500 A / Gauge NFC DIN UL CSA 0,5-6 mm² 8-6 AWG 8-6 AWG 0,5-0 mm² 8-6 AWG 8-6 AWG 500 V Gr.C () 600 V () 50 V 0 A 5 A 5 A 0 mm² 6 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 6 mm,-,4 Nm IP 0.5".6" Ib.in FEMS V th. mm BJS () 0 poles Screw for BJS Washer for BJS AD, FU50 0,5 A A A ,5 A A FU55,6 A A ,5 A A , A See section on markers marking method 6 Sides of block Note : () Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. () Use of these accessories requires the user to cut out the partition. 40

9 T Fuse holder terminal block with screwed plug for 5 x 0 mm fuses Compression clamp DIN - DIN Spacing mm (.47") MB 0/.SF... Spacing mm (.47") MB 0/.SFD mm block with neon blown fuse indicator for fuses 5 x 0 mm. mm block without foot, with neon fusion indicator for fuses 5 x 0 mm. Color Colour Grey/0-0V () Grey/LED 4 V () MB 0/.SFL MB 0/.SFD Grey/LED 4 V () MB 0/.SFD End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. End section grey IDC jumper Fuse 5 x 0 mm 50 V 4 emovable locking foot grey ails, / Gauge NFC DIN UL CSA NFC DIN UL CSA 0,5-6 mm² 8-6 AWG 8-6 AWG 0,5-0 mm² 8-6 AWG 8-6 AWG 0 A 5 A 5 A 0 mm² 6 AWG 6 AWG mm 6 mm,-,4 Nm IP 0.5".6" Ib.in FEMS V th. mm AD,5 4 A FU50 0,5 A A A ,5 A A V Gr.C () 600 V () 50(SFL) 4(SFD) Wire stripping ecomm. ecomm. Protection / Gauge 0,5-6 mm² 8-6 AWG 8-6 AWG 0,5-0 mm² 8-6 AWG 8-6 AWG 500 V Gr.C () 600 V () 4 V 0 A 5 A 5 A 0 mm² 6 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 6 mm,-,4 Nm IP 0.5".6" Ib.in FEMS V th. mm AD,5 4 A FU50 0,5 A A A ,5 A A ACD See section on markers marking method 6 Sides of block 6 Sides of block Note : () Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. () Max. leakage current :,8 ma () Max. leakage current : 5, ma 4

10 T Fuse holder terminal blocks for 5 x 0 mm and 5 x 5 mm fuses Compression clamp DIN - DIN Spacing mm (.5") MU 0/.SF Spacing 4,5 mm (.570") MU 0/4,5.SF mm block for blown fuse indicator (to be ordered separately). 4,5 mm block for blown fuse indicator (to be ordered separately). Color Color Black V0 MU 0/.SF Black V0 MU 0/4,5.SF End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us , 5, 6 8 End section black Test plug Test socket 4 Standard jumper bar 5 Screw for BJ 6 Washer for BJ 7 Fuse 5 x 0 50 V Fuse 5 x 5 50 V Fast acting HPC 500 A 8 Blown fuse indicator 9 Comb-type jumper bar 70 A / Gauge NFC DIN UL CSA NFC DIN UL CSA 0,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C () 600 V () 600 V () 6 A 6 A 6 A 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA FEMU V0 th.,5 mm FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm BJS 0 poles VJS DJ FU50 0,5 A A A ,5 A A A ,5 A A , A LEN Neon 0-0 VAC Neon 480 VAC Leakage current with neon indicator < 0,5 ma (0 & 480 VAC) < 0,7 ma (0 VAC) PC 0 poles / Gauge 0,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C () 600 V () 600 V () 6 A 6 A 6 A 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA closed block delivered with plate FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm FU50 0,5 A A A ,5 A A FU55,6 A A ,5 A A , A LEN Neon 0-0 VAC Neon 480 VAC Leakage current with neon indicator < 0,5 ma (0 & 480 VAC) < 0,7 ma (0 VAC) LED 4 VDC Max. leakage current = 5.mA LED 4 VDC Max. leakage current = 5.mA See section on markers marking method 7 Sides of block 6 7 Sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. 4

11 T Fuse holder terminal blocks for 6,5 x 5,4 mm /4 x in. and 6,5 x mm /4 x /4 in. fuses Compression clamp DIN - DIN Spacing mm (.5") MU 0/.SF Spacing 4,5 mm (.570") MU 0/4,5.SF mm block for blown fuse indicator (to be ordered separately). 4,5 mm block for blown fuse indicator (to be ordered separately). Color Color Black V0 MU 0/.SF Black V0 MU 0/4,5.SF End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us , 5, 6, End section black Test plug Test socket 4 Standard jumper bar 5 Screw for BJ 6 Washer for BJ 7 Fuse 6,5 x mm Quick blow fuse cartridge as per UTE Blown fuse indicator clamp Stranded wire / Gauge NFC DIN UL CSA NFC DIN UL CSA 0,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C () 600 V () 600 V () 6 A 6 A 6 A 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA FEMU V0 th.,5 mm FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm BJS 0 poles VJS DJ FU6 6,5 x 0,5 A ,6 A A ,6 A ,5 A A , A A A LEN Neon 0-0 VAC Neon 480 VAC Leakage current with neon indicator < 0,5 ma (0 & 480 VAC) < 0,7 ma (0 VAC) clamp Stranded wire 0,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C () 600 V () 600 V () 6 A 6 A 6 A / Gauge 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA delivered with the block FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm FU6 6,5 x 0,5 A ,6 A A ,6 A ,5 A A , A A A LEN Neon 0-0 VAC Neon 480 VAC Leakage current with neon indicator < 0,5 ma (0 & 480 VAC) < 0,7 ma (0 VAC) LED 4 VDC Max. leakage current = 5.mA See section on markers marking method 7 Sides of block 6 7 Sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. 4

12 T Switch terminal blocks with neutral cartridge Compression clamp DIN - DIN Spacing mm (.5") MU 0/.SN Spacing 4,5 mm (.570") MU 0/4,5.SN mm block with neutral cartridge locked on blue holder. 4,5 mm block with neutral cartridge locked on blue holder. Color Color Black/Blue V0 MU 0/.SN Black/Blue V0 MU 0/4,5.SN End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. 4, 5, 6 End section black Test plug Test socket 4 Standard jumper bar 57 A 5 Screw for BJS 6 Washer for BJS 7 Comb-type jumper bar 70 A 8 Neutral cartridge / Gauge NFC DIN UL CSA NFC DIN UL CSA 0,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C 600 V 600 V 6 A 6 A 6 A 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA FEMU V0 th.,5 mm FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm BJS 0 poles VJS DJ PC 0 poles CN ,5-6 mm² -0 AWG 6 AWG max. 0,5-0 mm² -0 AWG 6 AWG max. 750 V Gr.C 600 V 600 V 6 A 6 A 6 A / Gauge 0 mm² 0 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm IP 0.47"." Ib.in NEMA delivered with the block FC DIA. mm FC4 DIA. 4 mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm CN See section on markers marking method 7 Sides of block 6 7 Sides of block 6 44

13 T Fuse holder terminal blocks for 6,5 x 5,4 mm /4 x in. and 6,5 x mm /4 x /4 in. fuses Compression clamp DIN - DIN Spacing mm (.5") ML 0/.SF Spacing mm (.5") ML 0/.SN mm standard block. mm block with disconnect link bar locked on blue lever. Color Color Black V0 ML 0/.SF Black / Blue V0 ML 0/.SN End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. / Gauge NFC DIN 0,5-6 mm² -0 AWG -8 AWG 0,5-0 mm² -0 AWG -8 AWG 800 V () 600 V () 600 V () 8 kv 6 A 5 A 5 A 0 mm² / A6 0 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm.47".7" Ib.in / Gauge NFC DIN 0,5-6 mm² -0 AWG -8 AWG 0,5-0 mm² -0 AWG -8 AWG 800 V 600 V 600 V 8 kv 6 A 5 A 5 A 0 mm² / A6 0 AWG 8 AWG mm 5,5 mm,-,4 Nm.47".7" Ib.in End section black FEMU V0 th.,5 mm FEMU V0 th.,5 mm Test plug FC DIA. mm FC DIA. mm FC4 DIA. 4 mm FC4 DIA. 4 mm Test socket AL DIA. mm AL DIA. mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm AL4 DIA. 4 mm Standard jumper bar BJS () 0 poles BJS () 0 poles screw for BJS VJS VJS washer for BJS DJ DJ Comb-type jumper bar 70 A PC 0 poles PC 0 poles Assembly rod TGA poles TGA poles TGA poles TGA poles TGA 4 poles TGA 4 poles Assembly ring ANT ANT Fuse 6,5x mm ( /4 x /4 ") FU6 6,5 x BPC quick-blow fuse cartridge 0,5 A Installation of jumper bar not assembled as per IEC 7-0,6 A A ,6 A ,5 A A , A HPC time delay fuse cartridge 0 A as per UL 98G 6 A Wire stripping ecomm. ecomm. Protection See section on markers marking method 6 C60 on top of block 7 C80 on sides of bock 6 6 C60 on top of block 7 C80 on sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. () Use of these accessories require the user to cut out the partition. 45

14 T Fuse holder terminal blocks for 6,5 x 5,4 mm /4 x in. and 6,5 x mm /4 x /4 in. fuses Compression clamp DIN - DIN ML 0/.SFL... Spacing mm (.5") Spacing mm (.5") ML 0/.SFD... mm block with neon blown fuse indicator. mm block with LED blown fuse indicator. Color Color Black V0/0-0V Black V0/480V ML 0/.SFL ML 0/.SFL Black V0/LED 4V Black V0/LED 48V ML 0/.SFD ML 0/.SFD End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us * Blocks with LED indicator are labeled "+" on the outside of the lever. The indicator can be reversed in the field if required. / Gauge NFC DIN 0,5-6 mm² -0 AWG -8 AWG 0,5-0 mm² -0 AWG -8 AWG 800 V () 600 V () 600 V () 8 kv 6 A 5 A 5 A 0 mm² / A6 0 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm.47".7" Ib.in < 0,5 ma (0 & 480 V) < 0,7 ma (0 V) / Gauge NFC DIN 0,5-6 mm² -0 AWG -8 AWG 0,5-0 mm² -0 AWG -8 AWG 800 V () 600 V () 600 V () 8 kv 6 A 5 A 5 A 0 mm² / A6 0 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm,-,4 Nm.47".7" Ib.in End section black FEMU V0 th.,5 mm FEMU V0 th.,5 mm Test plug FC DIA. mm FC DIA. mm FC4 DIA. 4 mm FC4 DIA. 4 mm Test socket AL DIA. mm AL DIA. mm AL DIA. mm AL DIA. mm AL4 DIA. 4 mm AL4 DIA. 4 mm Standard jumper bar BJS () 0 poles BJS () 0 poles screw for BJS VJS VJS washer for BJS DJ DJ Comb-type jumper bar 70 A PC 0 poles PC 0 poles Assembly rod TGA poles TGA poles TGA poles TGA poles TGA 4 poles TGA 4 poles Assembly ring ANT ANT Fuse 6,5x mm ( /4 x /4 ") FU6 6,5 x FU6 6,5 x BPC quick-blow fuse cartridge 0,5 A ,5 A as per IEC 7-0,6 A ,6 A A A ,6 A ,6 A ,5 A ,5 A A A , A , A HPC time delay fuse cartridge 0 A A as per UL 98G 6 A A Leakage current Leakage current with neon indicator with LED indicator 4 V or 48 V < 4,5 ma See section on markers marking method 6 C60 on top of block 7 C80 on sides of block 6 6 C60 on top of block 7 C80 on sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. () Use of these accessories requires the user to cut out the partition. 46

15 T Fuse holder terminal blocks for 6,5 x mm /4 x /4 in. fuses Compression clamp DIN - DIN Spacing 6 mm (.60") M 0/6.SF... Spacing 6 mm (.60") M 0/6.SN 6 mm block with or without blown fuse indicator. 6 mm block with disconnect link bar locked on blue holder. Color Color End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. 4, Fuse 6,5 x mm quick-blow fuse 50 V Comb-type jumper bar 70 A 70 A 70 A 70 A Insulating tip 4 Blown fuse indicator () Without blown fuse indicator : Grey M 0/6.SF For fusion indicator to be ordered separately : Grey M 0/6.SFL / Gauge NFC DIN UL CSA 0,5-0 mm² 4-8 AWG 4-8 AWG 0,5-6 mm² 4-8 AWG 4-8 AWG 750 V Gr.C () 600 V () 600 V () 6 A 6 A 6 A 6 mm² 8 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm 0,8- Nm.4".7" Ib.in FU6 6,5 x 0,5 A ,6 A A ,6 A ,5 A A , A A A PC6 poles PC6 poles PC6 4 poles PC6 0 poles EIP LEN () Neon 0-0 V AC LEN () Neon 480 V AC Leakage current with neon indicator < 0,5 ma (0 & 480 V) < 0,7 ma (0 V AC) Grey / Gauge M 0/6.SN NFC DIN UL CSA 0,5-0 mm² 4-8 AWG 4-8 AWG 0,5-6 mm² 4-8 AWG 4-8 AWG 750 V Gr.C () 600 V 600 V 6 A 6 A 6 A 6 mm² 8 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm 0,8- Nm.4".7" Ib.in PC6 poles PC6 poles PC6 4 poles PC6 0 poles EIP LED 4 VDC Max. leakage current = 5.mA See section on markers marking method GANGED POLYPHASE FUSE DISCONNECT Hinged lever and pop-up carrier fuse holders are available in ganged polyphase, and 4 pole assemblies, with up to A fuses. Use for convenient manual isolating of switches. 7 Sides of block 6 7 Sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. () Only for block :

16 T Fuse holder terminal blocks for 8,5 x,5 mm / x /4 in. fuses Compression clamp DIN - DIN Spacing 6 mm (.60") M 0/6.SF Spacing 6 mm (.60") M 0/6.SN 6 mm block without blown fuse indicator. 6 mm block with disconnect link bar locked on blue holder. Color Color Grey M 0/6.SF Grey / Blue M 0/6.SN End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us., Fuse 8,5 x,5 mm Comb-type jumper bar 70 A 70 A 70 A 70 A Insulating tip / Gauge NFC DIN UL CSA NFC DIN UL CSA 0,5-0 mm² 4-8 AWG 4-8 AWG 0,5-6 mm² 4-8 AWG 4-8 AWG 750 V Gr.C () 600 V 600 V () 0 A 6 A 0 A 6 mm² 8 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm 0,8- Nm.4".7" Ib.in FU85 A A A A A A PC6 poles PC6 poles PC6 4 poles PC6 0 poles EIP ,5-0 mm² 4-8 AWG 4-8 AWG 0,5-6 mm² 4-8 AWG 4-8 AWG 750 V Gr.C () 600 V 600 V () 0 A 6 A 0 A / Gauge 6 mm² 8 AWG 8 AWG Wire stripping ecomm. ecomm. Protection mm 5,5 mm 0,8- Nm.4".7" Ib.in PC6 poles PC6 poles PC6 4 poles PC6 0 poles EIP See section on markers marking method 7 Sides of block 6 7 Sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. 48

17 NOTES 49

18 FE8-009 Modular fuse-holder for 8,5 x,5 mm / x /4 in. fuses DIN FE8. FE8-0.N FE8.N.C FE8.N Spacing 7,6 mm (0.69") module Spacing 7,6 mm (0.69") module Spacing 7,6 mm (0.69") module Spacing 5, mm (.9") modules." IP0 protection Standards : IEC 947- / 69- ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Standard With blown-fuse indicator With blown-fuse indicator 4-48 AC/DC / 48-5 VAC VAC pole The assembly of more than modular fuse-holders equipped with fuses could downgrade rated current. Consult us. pole poles : phase + neutral poles : phase + neutral FE FE8-0.N FE8.N.C FE8.N FE FE FE8.N.C FE8.N Blown fuse-indicator leakage current : < 0,5 ma at 4 V < ma at 48 V <,5 ma at other voltages mm AWG voltage V AC ~/= DC current A wire size mm² / AWG Wire stripping length ecommended torque 4 Solid wire Stranded wire Gauge Plate mounting kit Assembly Kit multipolar Flat pin jumper bar unipolar 6 A unipolar isolated IP0 unipolar (see accessories, bipolar page 54) bipolar tripolar tripolar tetrapolar tetrapolar 4 8,5 x,5 mm fuses (see accessories, page 54) 5 Flat pin terminal 5 mm (5 mm²) 0 mm PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU A mm 8 AWG 8 AWG PCP.. AU PCP.. AU PCP..57 AU FU AWG 0-8 AWG BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU see section on markers C55 - C50 C55 - C50 C55 - C50 C55 - C50 50

19 FE8-009 FE8. Spacing 5, mm (.9") modules FE8. Spacing 5, mm (.08") modules FE8.N.C FE8.N FE8.4 Spacing 5, mm (.08") modules Spacing 70.4 mm (.77") 4 modules Spacing 70,4 mm (.77") 4 modules The assembly of more than modular fuse-holders equipped with fuses could downgrade rated current. Consult us. poles FE poles FE poles : phases + neutral 4 poles : phases + neutral 4 poles FE8.N.C FE8.N FE FE8.N PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU A4 0-8 AWG 0-8 AWG mm 8 AWG 8 AWG FU85 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU85 BTVP5 AU BTVP0 AU C55 - C50 C55 - C50 C55 - C50 C55 - C50 C55 - C50 5

20 FE0-009 Modular fuse-holder for 0, x 8 mm / x / in. fuses DIN FE0. FE8-0.N FE0.N.C FE0.N Spacing 7,6 mm (0.69") module Spacing 7,6 mm (0.69") module Spacing 7,6 mm (0.69") module Spacing 5, mm (.9") modules." IP0 protection Standards : IEC 947- / 69- ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Standard With blown-fuse indicator With blown-fuse indicator 4-48 AC/DC / 48-5 VAC VAC pole The assembly of more than modular fuse-holders equipped with fuses could downgrade rated current. Consult us. pole poles : phase + neutral poles : phase + neutral FE FE8-0.N FE0.N.C FE0.N FE FE FE0.N.C FE0.N Blown fuse-indicator leakage current : < 0,5 ma at 4 V < ma at 48 V <,5 ma at other voltages mm AWG voltage V AC ~/= DC current A wire size mm² / AWG Wire stripping length mm / inches ecommended torque Nm / Ib.in 4 Solid wire Stranded wire Gauge Plate mounting kit Assembly Kit multipolar Flat pin jumper bar unipolar 6 A unipolar isolated IP0 unipolar (see accessories, bipolar page 54) bipolar tripolar tripolar tetrapolar tetrapolar 4 0, x 8 mm fuses (see accessories, page 54) 5 Flat pin terminal 5 mm (5 mm²) 0 mm pending pending PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU BTVP5 AU BTVP0 AU A mm 8 AWG 8 AWG PCP.. AU PCP.. AU PCP..57 AU FU0 0-8 AWG 0-8 AWG BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU see section on markers C55 - C50 C55 - C50 C55 - C50 C55 - C50 5

21 FE0-009 FE0. Spacing 5, mm (.9") modules FE0. Spacing 5, mm (.08") modules FE0.N.C FE0.N FE0.4 Spacing 5, mm (.08") modules Spacing 70.4 mm (.77") 4 modules Spacing 70,4 mm (.77") 4 modules The assembly of more than modular fuse-holders equipped with fuses could downgrade rated current. Consult us. poles FE poles FE poles : phases + neutral 4 poles : phases + neutral 4 poles FE0.N.C FE0.N FE FE0.N pending pending PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU pending pending PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU pending pending A4 0-8 AWG 0-8 AWG mm 8 AWG 8 AWG FU0 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU FU0 BTVP5 AU BTVP0 AU C55 - C50 C55 - C50 C55 - C50 C55 - C50 C55 - C50 5

22 FENT_ACC 009 Assembly kit The kit is composed of 0 packages of these 4 parts. poles assembly Fuses FU0-0, x 8 mm V Distribution (gg) Motor protection (am) 0,6 A consult us A consult us A A A A A A consult us 6 A A A consult us A consult us FU85-8,5 x,5 mm Part number A A A A A A Plate mounting Screw (M4) not delivered Holes Ø 4, or Ø M 4 Jumper bar With flat pin With spade isolated flat pin 0 mm isolated spade 0 mm Number Number Dimensions Part number of poles of modules (mm) 0 PCP.. AU PCP.. AU PCP..57 AU PCP.. AU PCP..60 AU PCP.. AU PCP..60 AU PCP.4. AU PCP.4.60 AU Number Number Dimensions Part number of poles of modules (mm) 0 PCF.. AU PCF..57 AU PCF.. AU PCF..60 AU PCF.. AU PCF..60 AU PCF.4. AU PCF.4.60 AU Terminal block for 5 mm² wire With spade Model Dimensions Part number (mm) with flat pin 5 BTVP 5 AU BTVP 0* AU with spade 5 BTVF 5 AU BTVF 0* AU * to be used with jumper bars With flat pin 54

23 T Fuse-holder terminal blocks for 0, x 8 mm / x / in. fuses Compression clamp DIN - DIN Spacing mm (.866") MB 0/.SF... Spacing mm (.866") MB 0/.SN mm block with or without blown fuse indicator. mm block with disconnect link bar locked on blue holder. End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched ail x 5 PZ Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. 4 Without blown fuse indicator : Grey MB 0/.SF With blown fuse indicator to be ordered separately : Grey MB 0/.SFL NFC DIN 0,5-0 mm² 8-6 AWG 8-6 AWG 0,5-6 mm² 8-0 AWG 8-0 AWG 800 V () 600 V () 600 V () 6 on top of the block 6 on top of the block Note : () Insulation voltage of terminal block - operating voltage : in accordance with fuse rating. () Only for : MB 0/.SN NFC DIN 0,5-0 mm² 8-6 AWG 8-6 AWG 0,5-6 mm² 8-0 AWG 8-0 AWG 800 V () 600 V 600 V 0 A 55 A 55 A 0 A 55 A 55 A / Gauge 6 mm² 6 AWG 6 AWG / Gauge 6 mm² 6 AWG 6 AWG Wire stripping ecomm. ecomm. Protection Wire stripping ecomm. ecomm. Protection,5 mm 6,5 mm.-4 Nm IP 0,5 mm 6,5 mm.-4 Nm IP 0.49".56" 0-5 Ib.in.49".56" 0-5 Ib.in Comb-type jumper bar 70 A PC poles PC poles PC 0 poles PC 0 poles IDC jumper AD, AD, Fuse 0, x 8 mm V FU0 STD Slow blow 0,6 A A A A A A A A A A A A Blown Fuse indicator () LEN () Neon 0-0 V LEN () Neon 480 V AC Leakage current with neon indicator < 0,5 ma (0 & 480 V AC) < 0,7 ma (0 V AC) LED 4VDC See section on markers marking method Color Color max. leakage current 5.ma Grey / Blue Disconnect assemblies MB 0/.SN pole + neutral MB 0/.S poles MB 0/.SN poles + neutral MB 0/.S poles MB 0/.SN poles + neutral MB 0/.S4 4 poles

24 T Fuse holder terminal blocks with screwed plugs for 0, x 8 mm / x / in. and DO - DO fuses Compression clamp DIN - DIN Spacing 4 mm (.950") MB 0/4.SF... Spacing 0 mm (.80") MB 5/0.SF 4 mm closed thermoset block for 0, x 8 and DO fuses. 0 mm closed block for DO fuses. End stop th. 9, mm BADL V End stop th. 9, mm BAM Other end stops : See section ail 5 x 7,5 x P0 prepunched ail 5 x 5 x, P ail 5 x 5 x,5 P5 prepunched Other rails : See section Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. Standard jumper bar IDC jumper Fuse 0, x 8 mm 500 V Fuse DO 80 V Fuse DO 80 V Color Color Grey / white plug for 0, x 8 / x / fuses MB 0/4.SF Grey / black plug for DO fuses / Gauge MB 0/4.SF NFC DIN UL CSA NFC DIN UL CSA 0,5-6 mm² 8-8 AWG 8-6 AWG 0,5-0 mm² 8-8 AWG 8-6 AWG 750 Gr.C () 600 V 600 V A 5 A 0 A 0 mm² 8 AWG 6 AWG Wire stripping ecomm. ecomm. Protection mm 6 mm,-,4 Nm IP 0.5".6" Ib.in BJS4 0 A 0 poles AD,5 4 A FU0 STD Slow. Blow 0,5 A A A A A A A A A A A A FUD DO Gauge A pink A brown A green A red A Grey / black plug for DO fuses MB 5/0.SF / Gauge 0,75-5 mm² 0,75-5 mm² 750 Gr.C () 6 A 5 mm² Wire stripping ecomm. ecomm. Protection 0 mm 8 mm -,5 Nm IP 0.94".5" Ib.in BJS4 0 A 0 poles AD,5 4 A FUD DO Gauge 0 A blue A yellow A black A white A See section on markers marking method 6 Sides of block 7 Sides of block 6 Note : () Insulation voltage of terminal block - operating voltage : In accordance with fuse rating. 56

25 FE4-009 Modular fuse-holder for 4 x 5 mm 9/6 x in. fuses DIN microswitch FE4... Spacing 6,5 mm (.04").5 modules FE4... Spacing 5 mm (.08") modules FE4... Spacing 79,5 mm (.") 4.5 modules () Influence of voltage on I max. current I max. 690 V 5 A 400 V 50 A Influence of number of poles on I max. current Two position clip for rail mounting No. of poles I max. -- In ,80 x In ,70 x In > 0 0,60 x In IP 0 protection Standards : IEC 69--, IEC 947- ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Microswitch description (see page 60) Indicator : 0 V min. 690 V max. mm AWG Standard With indicator (microswitch in accessory) With microswitch Solid wire Stranded wire max. () V AC ~/= DC max. () A wire size mm² / AWG Wire stripping length mm / inches ecommended torque Nm / Ib.in pole FE4. FE4..I FE4..M FS00. FS00.46 FS () () 0 0 poles * microswitch controlling poles FE4. FE4..M* FS00.5 FS00.9 FE4. FE4..M** FS00.6 FS AWG 6- AWG 6- AWG 6- AWG 6- AWG 6- AWG () () 0 0 poles ** microswitch controlling poles 690 () () mm AWG AWG 5 mm AWG AWG 5 mm AWG AWG Nm / 6.4 lb.in. Nm / 6.4 lb.in. Nm / 6.4 lb.in. Influence of ambient temperature on I max. current Temp. I max. 0 C In 0 C 0.95 x In 40 C 0.90 x In 50 C 0,80 x In Modular fuse-holder for 4 x 5 mm fuses (9/6 x in.) DIN microswitch FE4.N Spacing 6,5 mm (.04").5 modules FE4.N... Spacing 5 mm (.08") modules FE4.N... Spacing 79,5 mm (.") 4.5 modules () Influence of voltage on I max. current I max. 690 V 5 A 400 V 50 A Influence of number of poles on I max. current Two position clip for rail mounting No. of poles I max. -- In ,80 x In ,70 x In > 0 0,60 x In IP 0 protection Standards : IEC 69--, IEC 947- ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Microswitch description (see page 60) Indicator : 0 V min. 690 V max. mm AWG Standard With indicator With microswitch Solid wire Stranded wire max. () V AC ~/= DC max. () A wire size mm² / AWG Wire stripping length mm / inches ecommended torque Nm / Ib.in neutral FE4.N FS AWG 6- AWG FE4.N FE4.N.M FS00.4 FS AWG 6- AWG FE4.N FE4.N.M* Nm / 6.4 lb.in. FS00.7 FS AWG 6- AWG 690 () () () () () () mm AWG AWG 5 mm AWG AWG 5 mm AWG AWG Nm / 6.4 lb.in. neutral + pole Nm / 6.4 lb.in. neutral + poles * microswitch controlling poles Influence of ambient temperature on I max. current Temp. I max. 0 C In 0 C 0.95 x In 40 C 0.90 x In 50 C 0,80 x In 57

26 FE Modular fuse-holder for x 57 mm /6 x /4 in. fuses Class J - DIN FJ... Spacing,5 mm (.8") FJ... FJ... Spacing 65 mm (.56") Spacing 97,5 mm (.84") Assembly kit KJ FS00. Two position clip for rail mounting IP 0 protection Standard : UL listed, file No E964 pole poles poles ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Indicator : 90 VAC - 5 VDC min. 600 VAC/DC max. Standard With indicator FJ. FJ..I FS00.0 FS00.04 FJ. FS00.0 FJ. FS00.0 FJ..I FS00.05 FJ..I FS00.06 Solid wire Stranded wire mm AWG V AC ~/= DC A wire size mm² / AWG Wire stripping length mm / inches ecommended torque Nm / Ib.in AWG 4-0 AWG AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG mm /.5" 4 Nm / 5. lb.in AWG 4-0 AWG mm /.5" 4 Nm / 5. lb.in AWG 4-0 AWG mm /.5" 4 Nm / 5. lb.in. Modular fuse-holder for 7 x 60 mm fuses ( /6 x /8 in.) Class J - DIN FJ7... Spacing 40 mm (.57") FJ7... Spacing 80 mm (.5") FJ7... Spacing 0 mm (4.7") Assembly kit KJ7 FS00.6 Two position clip for rail mounting IP 0 protection Standard : UL listed, file No E964 pole poles poles ail 5 x 7.5 x P0 prepunched ail 5 x 5 x. P ail 5 x 5 x.5 P5 prepunched eference Indicator : 90 VAC - 5 VDC min. 600 VAC/DC max. Standard With indicator FJ7. FJ7..I FS00.07 FS00.0 FJ7. FS00.08 FJ7. FS00.09 FJ7..I FS00. FJ7..I FS00. Solid wire Stranded wire mm AWG V AC ~/= DC A wire size mm² / AWG Wire stripping length mm / inches ecommended torque Nm / Ib.in AWG 4-0 AWG AWG 0 AWG 0 AWG 0 AWG 0 AWG 0 AWG mm /.5" 5. Nm / 45.8 lb.in AWG 4-0 AWG mm /.5" 5. Nm / 45.8 lb.in AWG 4-0 AWG mm /.5" 5. Nm / 45.8 lb.in. 58

Main Catalog. Terminal blocks Insulation displacement ADO System

Main Catalog. Terminal blocks Insulation displacement ADO System Main Catalog Terminal blocks displacement System Summary Presentation... - Selection guide... - - clamp connection... - 8 Feed through terminal blocks... Feed through terminal blocks - Double-deck...

More information

Jumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar

Jumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar BJ Jumper bar Use the BJ jumper bar to connect consecutive and nonconsecutive terminal blocks with the same spacing. Two types of jumper bars are available : an assembled unit and a nonassembled unit.

More information

Block width on rail (mm) Standard block* is shown on blue background

Block width on rail (mm) Standard block* is shown on blue background How To Read Terminal Block Specifications How To Read Carton Labels Rated wire size (mm ) Mounting on multiple rail Spacing on rail Spacing 6 mm + 0,05 (.3") M /6 Block width on rail (mm) Standard block*

More information

Terminal blocks Gross Automation (877) 268-3700 www.entrelecsales.com sales@grossautomation.com

Terminal blocks Gross Automation (877) 268-3700 www.entrelecsales.com sales@grossautomation.com Short Form Catalogue Terminal blocks Gross utomation (877) 268-3700 www.entrelecsales.com sales@grossautomation.com guide guide SCREW CLMP TERMINL BLOCKS FEED THROUGH SWITCH FOR NEUTRL GROUND DOUBLE CIRCUIT

More information

48 SERIES Relay interface modules 10 A

48 SERIES Relay interface modules 10 A 48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2... Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast

More information

Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits

Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits Fuses for Semiconductor Protection - Cylindrical Fuses SIBA cylindrical Ultra-Rapid fuses are available in six different sizes They can be ordered with an integral striker for blown fuse indication or

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

49 Series - Relay interface modules 8-10 - 16 A. Features

49 Series - Relay interface modules 8-10 - 16 A. Features Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole

More information

V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays

V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules

More information

ZS10 Screw Clamp Terminal Block

ZS10 Screw Clamp Terminal Block Technical Datasheet 1SNK 161 004 D0201 ZS10 Screw Clamp Terminal Block Feed-through Catalogue Page 1SNK 161 004 S0201 10 mm² 6 AWG 8 mm 0.315 in Spacing Features and Benefits 53 2.09" Save space by connecting

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Product and functional description

Product and functional description Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected

More information

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied

More information

08. SEK IDC CONNECTORS

08. SEK IDC CONNECTORS . IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these

More information

400 Series Buccaneer BUCCANEER POWER. bulgin

400 Series Buccaneer BUCCANEER POWER. bulgin bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when

More information

Lighting Packages. 230 VAC Fluorescent Enclosure Light:

Lighting Packages. 230 VAC Fluorescent Enclosure Light: Spec-00581 H763.422.2211 763.422.2600 Electrical Lighting Packages Electrical Lighting Packages PANELITE Enclosure Lights Overview FEATURES Slim profile allows light to be tucked up out of the way for

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:

More information

D7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC

D7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =

More information

Electronic overload relay EF19 and EF45

Electronic overload relay EF19 and EF45 Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information

Emergency lighting units EM powerled

Emergency lighting units EM powerled M BASIC 1 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing SEV for output voltage < 60 V DC ow-profile casing (21 x 30 mm cross-section) 5-year

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

Thermal-Magnetic Circuit Breaker 3120-...-M1-..

Thermal-Magnetic Circuit Breaker 3120-...-M1-.. Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping

More information

General Purpose Relays Accessories. Accessories Miniature Relay PT

General Purpose Relays Accessories. Accessories Miniature Relay PT Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

IEC Connectors. Introduction

IEC Connectors. Introduction Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings

More information

Relés e Contatores de Estado Sólido SIRIUS

Relés e Contatores de Estado Sólido SIRIUS Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico

More information

HARTING Ethernet Cabling 8-poles Overview

HARTING Ethernet Cabling 8-poles Overview Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs

More information

Entrelec. Contents. Standard and Ground Terminal Blocks... 7-2. Spring Connection Terminal Blocks... 7-13

Entrelec. Contents. Standard and Ground Terminal Blocks... 7-2. Spring Connection Terminal Blocks... 7-13 Entrelec Contents Standard and Ground Terminal Blocks... 7-2 Spring Connection Terminal Blocks... 7-13 Standard and Ground Terminal Blocks Insulation Displacement... 7-20 Tools... 7-26 Power Terminal Blocks...

More information

Switches & Pilot Devices

Switches & Pilot Devices Key features: 21/4 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action

More information

Color Mark Sensor with Red or Green LED E3S-VS

Color Mark Sensor with Red or Green LED E3S-VS Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical

More information

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

HARAX circular connector

HARAX circular connector Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor

More information

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

The range of rail-mounted terminal blocks. for a perfect electrical installation.

The range of rail-mounted terminal blocks. for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal

More information

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic

More information

Directory chapter 04

Directory chapter 04 M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................

More information

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits

More information

RY2 miniature industrial relays

RY2 miniature industrial relays 6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,

More information

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information. Product and Applications Description The power supply units N 125/x2 can supply DC 24 V power from an additional pair of terminals (yellowwhite). This DC 24 V output voltage can be used to power e.g. an

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011

ABB i-bus KNX Fan Coil Actuator, MDRC FCA/S 1.1M, 2CDG 110 084 R0011 , 2CDG 110 084 R0011 2CDC 071 112 F0008 The Fan Coil Actuator is a modular installation device (MDRC) in pro M design. It is intended for installation in the distribution board on 35 mm mounting rails.

More information

DCS Input/Output Relay Card Series

DCS Input/Output Relay Card Series Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test

More information

Starting Torque: Mass Moment of Inertia: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Flat Cable:

Starting Torque: Mass Moment of Inertia: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Flat Cable: Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:

More information

7000 Series Buccaneer

7000 Series Buccaneer The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently

More information

80 Series - Modular timers 16 A. Features 80.01 80.11

80 Series - Modular timers 16 A. Features 80.01 80.11 80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h

More information

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011

ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011 Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS

01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS . HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or

More information

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA

VEO. V4PF480Y/277VSYTK02 Art.Nr.: 2104200. V4PF480Y/277VSYTK02P Art.Nr.: 2104210 TECHNICAL DATA Monitoring of phase sequence and phase loss Monitoring of asymmetry Temperature monitoring (PTC) Supply voltage 208-480 V AC Supply circuit = measuring circuit 2 change-over contacts Width 45 mm Control

More information

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders

More information

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com Product description Wide rated operational voltage 208 600 V AC Wide rated control supply voltage 100 250 V, 50/60 Hz Rated operational current 18 to 370 A Wide ambient temperature range, -25 to +60 ºC

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

Technical catalogue. Modular DIN rail components Installation contactors

Technical catalogue. Modular DIN rail components Installation contactors Technical catalogue Modular DIN rail components Installation contactors Installation Contactors Overview... ESB Installation Contactors 0 A / AC-/AC-7a ESB0...4 4 A / AC-/AC-7a ESB4...5 40 A / AC-/AC-7a

More information

Catalog. Modular DIN rail components Installation contactors

Catalog. Modular DIN rail components Installation contactors Catalog Modular DIN rail components Installation contactors 0 CDC00C00 Installation contactors Benefits and features Overview Ordering details ESB installation contactors ESB0 ESB ESB0 ESB 7 EN installation

More information

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02. Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11

More information

INDICATOR LAMPS & LED REPLACEMENT LAMPS

INDICATOR LAMPS & LED REPLACEMENT LAMPS INDICATOR LAMPS & LED REPLACEMENT LAMPS Neon indicators (internal resistor) 120VAC 55-452-0 Red lens 120VAC 55-453-0 Amber lens 120VAC 55-455-0 Green lens 120VAC Neon indicators (internal resistor) 120VAC

More information

picomax The Pluggable Connection System

picomax The Pluggable Connection System picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable

More information

Terminal Blocks. BA Series. Specifications. Model BA111T BA211T BA311T BA411S

Terminal Blocks. BA Series. Specifications. Model BA111T BA211T BA311T BA411S BA Series BA Series Specifications Key features: Self-contained: end plates are not required Rugged heavy-duty construction Current capacities up to 40A 3-pole units available as 1 piece (no endplates

More information

PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624

PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 PSU-U-24V/AC-6A/10/FTA-TR-MC PSAC 0624 v.1.0 AC/AC power supply unit Edition: 1 from 24 th October 2008 Supercedes edition: ---------- 10062009 CONTENTS: 1. Technical description. 1.1. General description

More information

MONITORING RELAYS. w VOLTAGE MONITORING RELAY UR5U1011. w SCHRACK-INFO. w TECHNICAL DATA

MONITORING RELAYS. w VOLTAGE MONITORING RELAY UR5U1011. w SCHRACK-INFO. w TECHNICAL DATA w VOLTAGE MONITORING RELAY UR5U1011 w SCHRACK-INFO AC/DC voltage monitoring in 1-phase mains Undervoltage monitoring 1 change over contact Width 17.5 mm Installation design w TECHNICAL DATA 502 1. Functions

More information

Terminal Block WR-TBL

Terminal Block WR-TBL Terminal Block WR-TBL 09/08-1 Terminal Block WR-TBL Würth Elektronik WR-TBL are available in many different connection types and offer large and modular terminal block possibilities in order to fulfill

More information

Capacitive Prox E2K-X

Capacitive Prox E2K-X Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows

More information

Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)

Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color) Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum

More information

Intersection Preassembled 19-inch Rack

Intersection Preassembled 19-inch Rack Intersection Preassembled 19-inch Rack The intersection preassembled 19-inch rack comes fully assembled, wired and ready to be installed in a server rack. The rack provides communications, power conversion

More information

INSTALLATION GUIDE. Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930

INSTALLATION GUIDE. Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930 INSTALLATION GUIDE Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930 Card Reader and Controller Model 3.5 with KIM Swipe Reader Table of Contents 1. Features..................................

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

Plug and Socket Devices CES 63 A Series 8579

Plug and Socket Devices CES 63 A Series 8579 www.stahl.de > Switch socket / plug 63 A > Large switch handle with clear switch position indication padlockable in 0- and I-position > Low insertion and withdrawal forces through individually encapsulated

More information

Electronic overload relay EF65, EF96 and EF146

Electronic overload relay EF65, EF96 and EF146 Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.

More information

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters

RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main

More information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC

More information

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357

PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL 1-800-782-4357 Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism

More information

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050 Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage

More information

EXLUX ECOLUX C-LUX LIGHTING. Explosion Protected Fluorescent Lighting Fixtures for Hazardous and Corrosive Applications

EXLUX ECOLUX C-LUX LIGHTING. Explosion Protected Fluorescent Lighting Fixtures for Hazardous and Corrosive Applications EXLUX ECOLUX C-LUX LIGHTING 6000 6008 6400 6408 6600 6608 6500 Explosion Protected Fluorescent Lighting Fixtures for Hazardous and Corrosive Applications Features: Electronic Ballasts For Fluorescent Bipin

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and

More information

Series 8146/5-V37 and Series 8150/5-V37

Series 8146/5-V37 and Series 8150/5-V37 www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection

More information

Redundancy Module QUINT-DIODE/40

Redundancy Module QUINT-DIODE/40 Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping

More information

ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket

ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket Technical Datasheet SNK64D00 Catalogue Page SNK64S00 ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket - Ease your test operations with the built-in test sockets, - Screwdriver

More information

gesis IP + Heavy Duty Class I, Zone 2

gesis IP + Heavy Duty Class I, Zone 2 gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas

More information

MCR1900 Media Converter 19-Slot Chassis

MCR1900 Media Converter 19-Slot Chassis MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the

More information

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.

More information

Feed-through terminal block - SSK 110 KER-EX - 0502058

Feed-through terminal block - SSK 110 KER-EX - 0502058 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid

More information

Electrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure

Electrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable, series CN Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable,

More information

OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE

OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &

More information

Terminal Blocks. BNH/BN Series. Specifications. Model BNH10W BNH15MW BNH15LW BNH30W

Terminal Blocks. BNH/BN Series. Specifications. Model BNH10W BNH15MW BNH15LW BNH30W BNH/BN UL Recognized File No. E78117 CSA Certified File No. LR64803 BNH/BN Series Specifications Key features: Touch-down terminals with spring-loaded captive screws Jumpers available up to 50A model Fuse

More information

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application. 1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay

More information

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles

Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.

More information

Universal MATE-N-LOK Connector System

Universal MATE-N-LOK Connector System Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or

More information

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2 Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened

More information

E T K A 14:36 18.02.20100 970-00. Year. Illustration. Model. Seite: 001. et_bt1.frm. Pos Part Number Name Remarks Qty Model.

E T K A 14:36 18.02.20100 970-00. Year. Illustration. Model. Seite: 001. et_bt1.frm. Pos Part Number Name Remarks Qty Model. 0 7 70-00 4:36 8.02.2000 connector housing pin 05 05 37 diode connector 2 3 4 5 6 2 05 05 37 D diode connector 7 8 0 2 3 4 5 6 7 8 20 2 22 23 24 25 26 27 28 2 30 3 32 33 34 3 357 07 7 B terminal pin housing

More information