CATALOG COVER FITTING PIPE CLAMP POST BASE HARDWARE A PART OF

Transcription

1 CATALOG COVER FITTING PIPE CLAMP POST BASE HARDWARE A PART OF

2 UNISTRUT COMMERCIAL Value-engineered fittings for commercial projects Unistrut is the standard for industrial support systems. Many commercial projects do not require the extreme strength it delivers. The marketplace is demanding products designed for sleeker installations. With that in mind, our engineers have developed Unistrut Commercial. This expanded product offering will complement our current product line by meeting the need for fittings used in lighter support applications. The line of.197 [5mm] thick fittings for use with 8 nuts and bolts is ideal to carry the equipment used in smaller commercial projects. PRODUCT FEATURES Value-engineered fittings for commercial projects Specifically designed for use with 8 nuts and bolts Hole size compatible with metric products Many selections available pre-assembled for easier installation (includes pre-installed bolt & channel nut) Lower package quantities for smaller commercial jobs Electro-galvanized coating per ASTM B66 Zinc plating All products have been fully tested and value engineered by Unistrut for optimum efficiency Products manufactured to Unistrut quality standards PRODUCT BENEFITS Can be used with any size channel, especially suited for use with 14 gauge and 16 gauge Perfect alternative to the ½ bolted system when industrial strength is not required Eliminates the need for a flat washer with 8 bolts Streamlined channel nut design offers maximum value Value engineered for competitive pricing Lighter weight, quicker installation leads to reduced labor costs Lower total installed costs Visit for comparative load ratings 2

3 PICTORIAL INDEX Hardware Hardware Hex Head Cap Screws Hex Slotted Machine Screws Hexagon Nuts Square Nuts Flat Washers Lock Washers Steel Threaded Rod Channel Nut Without Spring Channel Nut With Spring Channel Nut With Spring Pipe/Conduit Clamps Flat Fittings Pipe Clamps for Thin Wall Conduit (E.M.T.) Pipe Clamps for Rigid Steel Conduit Page 5 Square Channel Washer 2 Hole Hole Hole Elbow 4 Hole 4 Hole Elbow 4 Hole T Angle Fittings Z Shape Fittings 2 Hole 90 Fitting 2 Hole 90 Fitting 4 Hole 90 Fitting Hole Flush 90 Fitting Hole Flush 90 Fitting Hole Bench 90 Fitting 2 Hole Open 45 Fitting 1 5 8" Z 1 16" Z U Shape Fittings 1 5 8" U 1 16" U 1 5 8" Channel Splice 1 5 8" Clevis Wing, 2 Legs 1 5 8" Clevis Wing, Legs 1 5 8" 90 Wing 1 16" 2 Hole Channel Splice Post Bases Beam Clamps 1 5 8" Post Base Page 9 Brackets Page 9 C Shape Channel Beam Clamp C Shape HD Channel Beam Clamp Top Mount Beam Clamp 1 5 8" Window Beam Clamp 1 5 8" Single Channel Bracket Page " Double Channel Bracket Page 9 U-Bolt Beam Clamp Light Duty Beam Clamp Cast Beam Clamp

4 Hardware Hex Head Cap Screws Hex Slotted Machine Screws Hexagon Nuts Size Bag Quantity UCHCS025075EG 1 4" x 4" UCHCS025125EG 1 4" x 1 1 4" UCHCS07087EG* 8" x 7 8" UCHCS07125EG 8" x 1 1 4" UCHCS050125EG 1 2" x 1 1 4" UCHCS050150EG 1 2" x 1 1 2" * Assembled parts employ this bolt so the fitting will work with any channel depth. Square Nuts Size Bag Quantity UCSHS025075EG 1 4" x 4" UCSHS01100EG 5 16" x 1" UCSHS07125EG 8" x 1 1 4" Bag Size Quantity UCHXN025EG 1 4" UCHXN07EG 8" UCHXN050EG 1 2" Bag Weight Size Quantity (Ea.) UCSQN025EG 1 4" UCSQN07EG 8" Flat Washers Lock Washers Size Bag Quantity UCFLW025EG 1 4" UCFLW07EG 8" UCFLW050EG 1 2" Bag Weight Size Quantity (Ea.) UCLKW025EG 1 4" UCLKW07EG 8" UCLKW050EG 1 2" Steel Threaded Rod Channel Nut Without Spring Standard Length 10' (.0m) Size Weight (Ea.) ATHR-T-1/4-10EG 1 4" x ATHR-T-/8-10EG 8" x 16 ATHR-T-1/2-10EG 1 2" x 1 5. Low Carbon Steel Fy = 2,000 psi minimum Ft = 52,000 psi minimum Nut Size Thread UC006 1/4" EG 1 4" UC008 /8" EG 8" UC 010 1/2" EG 1 2" Use with any channel Channel Nut With Spring Nut Size Thread UC1006 1/4" EG 1 4" UC1008 /8" EG 8" UC1010 1/2" EG 1 2" Use with Any Channel except P00, P4100, P4000 Nut Size Thread UC4006 1/4" EG 1 4" UC4008 /8" EG 8" UC4010 1/2" EG 1 2" Use with P00, P4100, P4000 Channel 4

5 PIPE CLAMPS PIPE CLAMPS FOR THIN WALL CONDUIT (E.M.T.) 1 1 4" (2) Slotted hex head screw and nut included. Conduit Size In (mm) O.D. Size In (mm) Thickness Gauge (mm) Design Load UC1425 EG (/8") AS 8 (10) (14.7) 16 (1.5) UC1426 EG (1/2") AS 1 2 (1) (17.9) 16 (1.5) UC1427 EG (/4") AS 4 (19) (2.4) 16 (1.5) UC1428 EG (1") AS 1 (25) 1.16 (29.5) 16 (1.5) UC1429 EG (1 1/4") AS (2) (8.4) 16 (1.5) UC140 EG (1 1/2") AS (8) (44.2) 12 (2.7) UC141 EG (2") AS 2 (51) (55.8) 12 (2.7) UC1118 EG (2 1/2") AS (64) (7.0) 12 (2.7) UC1119 EG (") AS (76).500 (88.9) 12 (2.7) UC1120 EG ( 1/2") AS (101.6) 12 (2.7) UC1121 EG (4") AS 4 (102) (114.) 12 (2.7) PIPE CLAMPS FOR RIGID STEEL CONDUIT 1 1 4" (2) Slotted hex head screw and nut included IPS Pipe or Rigid Conduit Size In O.D. Size In (mm) Thickness Gauge (mm) Design Load UC1109 EG (/8") AS (17.1) 16 (1.5) UC1111 EG (1/2") AS (21.) 16 (1.5) UC1112 EG (/4") AS (26.7) 16 (1.5) UC111 EG (1") AS (.4) 16 (1.5) UC1114 EG (1 1/4") AS (42.2) 16 (1.5) UC1115 EG (1 1/2") AS (48.) 12 (2.7) UC1117 EG (2") AS (60.) 12 (2.7) UC1118 EG (2 1/2") AS (7.0) 12 (2.7) UC1119 EG (") AS.500 (88.9) 12 (2.7) UC1120 EG ( 1/2") AS (101.6) 12 (2.7) UC1121 EG (4") AS (114.) 12 (2.7)

6 FLAT PLATE FITTINGS SQUARE CHANNEL WASHER 2 HOLE CONNECTOR A 0.2 (5mm) Thick "A" 1 8" (80) UC1065 EG UC1065 EG AS 0.55 UC1062 EG 1 4" 0.15 UC106 EG 8" 0.1 US1064 EG 1 2" HOLE CONNECTOR HOLE ELBOW CONNECTOR 4 4" (120) 9 16" (90) UC1066 EG 0.42 UC1066 EG AS " (90) UC106 EG 0.44 UC106 EG AS HOLE CONNECTOR 4 HOLE ELBOW CONNECTOR " (160) UC1067 EG " (16) 1 2" UC180A EG 0.6 UC1067 EG AS HOLE "T" CONNECTOR " (18) 9 16" (90) UC101 EG 0.6 UC101 EG AS 1.16 "AS" parts are furnished assembled. Unless otherwise noted, fittings are.197" (5mm) thick and hole size is 7 16". Assembled components are supplied with 8" x 7 8" bolt and channel nut, for use with all channel depths. 6

7 ANGLE, Z AND U SHAPE FITTINGS 2 HOLE 90 FITTING 2 HOLE 90 FITTING " (50) 1 7 8" (47) UC1026 EG 0. UC1026 EG AS Uniform (Safety Factor 2.5) 2, " (41) 2 1 4" (57) UC1068 EG 0. UC1068 EG AS Uniform (Safety Factor 2.5) 2,000 U HOLE 90 FITTING HOLE FLUSH 90 FITTING 1 2" 1 5 8" (41) UC125 EG " (104) UC125 EG AS " (104) Uniform (Safety Factor 2.5) 4,000 U1068 UC126 EG 0.46 UC126 EG AS 0.86 Uniform (Safety Factor 2.5) 1,000 U125 U126 HOLE FLUSH 90 FITTING 1 7 8" (47) 7 8" (98) UC146 EG 0.46 UC146 EG AS 0.86 Uniform (Safety Factor 2.5) 2,000 HOLE BENCH 90 FITTING 2 16" (56) 1 2" UC1458 EG 0.46 UC1458 EG AS 0.86 Uniform (Safety Factor 2.5) 2,000 U146 U HOLE OPEN 45 FITTING "Z" CONNECTOR A 1 4" (44) " (71) UC1546 EG 0.46 UC1546 EG AS 0.7 4" (95) 1 5 8" (41) 2 1 8" (54) UC1045 EG 0.4 "AS" parts are furnished assembled. Unless otherwise noted, fittings are.197" (5mm) thick and hole size is 7 16". Assembled components are supplied with 8" x 7 8" bolt and channel nut, for use with all channel depths. 7

8 ANGLE, Z AND U SHAPE FITTINGS "U" CONNECTOR CHANNEL SPLICE " (4) 5 8" (17) 1 5 8" (41) UC1047 EG " UC176 EG CLEVIS WING, 2 LEGS CLEVIS WING, LEGS " (17) 1 7 8" (48) 2" (51) UC245 EG " (17) 1 7 8" (48) 2" (51) UC2227 EG " (42) 1 5 8" (41) WING 1 16 "Z" CONNECTOR " (49) " (49) UC222 EG 0.6 P4000 P " (88) 1 16" (21) UC4045 EG "U" CONNECTOR HOLE CHANNEL SPLICE 5 8" (17) " (4) P00 P4000 P " (21) UC4047 EG " UC476 EG 0.67 "AS" parts are furnished assembled. Unless otherwise noted, fittings are.197" (5mm) thick and hole size is 7 16". Assembled components are supplied with 8" x 7 8" bolt and channel nut, for use with all channel depths. 8

9 POST BASES & BRACKETS POST BASE SINGLE CHANNEL BRACKET 0.2" (5.0) 1 2" UC2072A EG 2.9 UC2072A SQ EG 2.9 2" (50.8) 1 4" (9.5) 9 16" (for 1 2" Bolt) (14.) 4 5 8" (117.5) P1000 A "A" UC2945 EG 12" 2.9 UC2946 EG 18" 4 UC2947 EG 24" 5 4 Holes 4" (19) Dia. 4 Holes " (150) " (150) 4" (19) Dia DOUBLE CHANNEL BRACKET 2" (50.8) " (150) UC2072A SQ " (150) UC2072A 6 1 4" (159) 9 16" (14.) A "A" UC2542 EG 12" 5 UC254 EG 18" " (6.0) P1001 UC2544 EG 24" POST BASE 0.2" (5.0) 1 2" UC2941 EG 2.82 UC2942 EG " (150) " (150) 15 16" (100) 15 16" (100) 2 Holes 2 Holes " (18) Dia " (18) Dia. UC2941 UC2942 "AS" parts are furnished assembled. Unless otherwise noted, fittings are.197" (5mm) thick and hole size is 7 16". Assembled components are supplied with 8" x 7 8" bolt and channel nut, for use with all channel depths. 9

10 BEAM CLAMPS C SHAPE CHANNEL BEAM CLAMP C SHAPE HD CHANNEL BEAM CLAMP 1 2" - 1 X 1 1 2" Set Screw Included 7 8" (22) max. 16" (5) 8" X 1 1 2" Set Screw Included UC1272S EG " (41) 7 8" (22) max UC1985S " (50) 1 16" (0) 1" (25) Total (when Used in Pairs) 750 Safety Factor 5 8" (9.5) 1 1 2" (8) Total (when Used in Pairs) 900 Safety Factor 5 TOP MOUNT BEAM CLAMP WINDOW BEAM CLAMP 1 2" (1) max " (52) 0.2" (5.0) 1 2" - 1 X 1 1 2" Hex Head Cap Screw and 1 2" Channel Nut Total (when Used in Pairs) 1,400 Safety Factor 5 UC186 EG AS " (22) max. 1 4" (45) 9 16" (90) 16" (5) 8" X 1 1 2" Set Screw Included 9 16" (90) UC1796S EG 0.69 U-BOLT BEAM CLAMP LIGHT DUTY BEAM CLAMP Mild steel "U" bolts are zinc plated. 7 8" (22) max. Hu " (75) 16" (5) H 8" U-Bolt Total (when Used in Pairs) UC ,500 UC Safety Factor 5 UC289 EG 0.14 "H" "Hu" UC2785 EG 1 5 8" 8" 0.7 UC2786 EG 1 2" 5" Safety Factor 5 CAST BEAM CLAMP Tapped for Rod Size 4" (19) Tapped Hole Size Design Load. Wt. (Ea.) UC EG 1/4" UC EG /8" UC EG 1/2" - 1 1, (safety factor 5) "AS" parts are furnished assembled. Unless otherwise noted, fittings are.197" (5mm) thick and hole size is 7 16". Assembled components are supplied with 8" x 7 8" bolt and channel nut, for use with all channel depths. 10

11 SPECIFICATIONS The technical specification for UNISTRUT COMMERCIAL products shall include all pertinent elements of the Guide Specification as provided on page 19 of the Unistrut #17 catalog including: 1 General Scope of Work Quality Assurance 01.0 Submittals Product Delivery, Storage and Handling Guarantee 2 Products 2.01 Acceptable Manufacturers 2.02 Materials 2.0 Finishes, A2 Electro-galvanized (EG) and A4 Hot-Dip Galvanized (HG) In addition to the aforementioned Product requirements the following product specifications are included for UNISTRUT COMMERCIAL metal framing fittings and components: 2.04 Design Gage: The metal framing fittings shall be light weight and high strength. The standard connection fitting gage shall be 5mm (.197 nominal) gage Standard fitting connections: Metal Framing fittings shall be provided with fastener connection holes no larger than 7/16 nominal dia. to accommodate /8 diameter fasteners Other Connections: Where ½ connections are required for trapeze drops or other similar installations, reduced gage nuts shall be employed, however nut performance in slip resistance and pull-out strength shall be equivalent to the MFMA standard requirement (latest edition) for the bolt thread size required Ergonomics: Box quantities for metal framing fittings shall weigh no more than 0 lbs maximum Products: Manufacture, Testing and Certification The metal framing system shall be constructed from press and roll-formed products produced by a single manufacturer. Products produced through other processes by third party partners (castings, fasteners, etc) shall be tested and certified by the metal framing fittings manufacturer All channel nuts shall be case hardened employing a heat treat and oil quench process to ensure consistent slip resistance All metal framing fittings shall be load rated by specific part numbers. The test set-up shall be with force applied vertical-down, beam load testing with fittings used in pairs. Test results including test set-up pictorials for fittings shall be available for submittal and review at the discretion of the owner. Allowable design loads shall be established based upon minimum safety factors applied to ultimate failure loads: Standard bolted connection fittings S.F. Pipe Clamps...5 S.F. Beam Clamps...5 S.F. Channel Nuts... S.F. Certified test results shall be available and provided if requested by the Customer Packaging All products including welded channel brackets shall be shipped to Customers in boxes, clearly labeled with part numbers, manufacturer s information, country of origin and quantity per box Box quantities shall be reduced from the standard packaging arrangements of full gage (1/4 ) standard metal framing fittings to accommodate tradesmen working at heights. Execution.01 Examination.02 Installation.0 Cleanup.04 Protection 11

12 16100 S. Lathrop Ave. Harvey, IL TOLL FREE / FAX / Atkore International, Inc. All rights reserved. USC-L-WebDocument