EHV CONNECTORS EHV TERMINALS ACFS (EHV)... ALUMINUM BOLTED TUBE TO FLAT PAD, SHORT...EHV-7

Transcription

1 CONNECTORS TERMINALS ACF ()... BOLTED TUBE TO FLAT PAD...- ACFS ()... BOLTED TUBE TO FLAT PAD, SHORT...-7 CCL-... COMPRESSION TUBE TO FLAT PAD...- CCLS-... COMPRESSION TUBE TO FLAT PAD, SHORT... - EVKET... WELD EXPANSION, TUBE TO FLAT...- EVKETVH... WELD EXPANSION, TUBE TO FLAT...- EVTFD... BIFURCATING TERMINAL...-9 HVCF... BOLTED, CABLES TO FLAT... - HVCF... BOLTED, CABLE TO FLAT... - HVETF/EVETF... WELDED EXPANSION...-7 HVRTE... WELDED EXPANSION...- HVSTF/EVSTF... BOLTED TUBE TO FLAT...- WCF-... WELDED, CABLES TO FLAT...- WCF-... WELDED, CABLE TO FLAT...- WSTF-... EXTERNAL WELD, TUBE TO FLAT WSTFE-... EXTERNAL WELD, TUBE TO FLAT WSTFX-... INTERNAL WELD, TUBE TO FLAT WSTFXH-EVH... INTERNAL WELD, TUBE TO FLAT COUPLERS EVSTF... WELDED, BIFURCATING TUBE COUPLER...- EVSTF... WELDED, TRIFURCATING TUBE COUPLER...- EVWETTR... WELDED, EXPANSION TUBE COUPLER...- HVSTT/EVSTT... BOLTED TUBE COUPLER HVWTEB/EVWTEB... TUBULAR WELDED, VARIABLE COUPLER WCI ()... WELDED TUBE COUPLER...-. WLI-... WELDED TUBE WLI WELDED TUBE TEES EVTCF... BOLTED, CABLE TO FLAT EVTTF... WELDED, TRIFURCATING, TUBE TO FLAT...-. EVWTF... WELDED, TUBE TO FLAT, SELF SHIELDING HVTBCC/EVTBCC... BOLTED CABLE MAIN TO CABLE TAP...-. HVTTF/EVTTF... BOLTED TUBE MAIN TO FLAT HVTTT/EVTTT... BOLTED TUBE MAIN TO TUBE TAP ORT ()... COMPRESSION CABLE MAIN TO FLAT...- ORT ()... COMPRESSION CABLE MAIN TO CABLE TAP...-. WTT ()... WELDED, TUBE TO TUBE, STRAIGHT...-. WTT ()... WELDED, TUBE TO TUBE WTT ()... WELDED, TUBE TO TUBE EACH WTTFR ()... WELDED, TUBE TO FLAT...-9.

2 CONNECTORS (CONTINUED) BUS SUPPORTS EVBCF... BOLTED BUS SUPPORT, FLAT EVKES... WELDED BUS SUPPORT, TUBE, EXPANSION...-. EVTS... BOLTED BUS SUPPORT, TUBE, DOUBLE MOUNT EVTS... BOLTED BUS SUPPORT, TUBE...-. EVVBS... WELDED BUS SUPPORT, TUBE, VERTICAL...- HVCS... BOLTED BUS SUPPORT, CABLE... - HVDCH/EVDCH... BOLTED BUS SUPPORT, CABLE SPACER... - HVDCS/EVDCS... BOLTED BUS SUPPORT, CABLE SPACER...- HVETS/EVETS... WELDED BUS SUPPORT, TUBE, EXPANSION... - HVRTS... WELDED BUS SUPPORT, TUBE, EXPANSION...- HVSCCS... BOLTED BUS SUPPORT, TUBE, SUSPENSION... - WTH-... WELDED BUS SUPPORT, TUBE, HOOK-ON WURE-... WELDED BUS SUPPORT, TUBE...-7 WUR-... WELDED BUS SUPPORT, TUBE STUD CONNECTORS BHVSD... BRONZE STUD, BOLTED TO FLAT...-9 BHVSF... BRONZE STUD, BOLTED TO FLAT...-8 EVSF... STUD, BOLTED TO BIFURCATING FLAT...- HVEDST/EVEDST... STUD, WELDED TO TUBE...- HVEDST-90/EVEDST STUD, WELDED TO 90 TO STUD... - HVSF... STUD, BOLTED TO FLAT...-0 END BELLS HVTEB/EVTEB... TUBULAR BOLTED, END BELL HVWTEB/EVWTEB... TUBULAR WELDED, END BELL SPECIALTIES EVEFD... EXTENSION PAD EVHS... HARDWARE SHIELD EVSC... SPACER FOR CABLES EVTGS... GROUNDING STUD TO TUBE, BOLTED EVWTGSR... GROUNDING STUD TO TUBE, WELDED HVCGS... GROUNDING STUD TO CABLE, BOLTED HVHS-90-D... HARDWARE HVPC/EVPC... PARALLEL CONNECTOR HVSC/EVSC... SPACER FOR CABLES HVSCT/EVSCT... SPACER FOR CABLES TO FLAT WEPE... WELDED END PLUG-EYE...-70

3 EXTRA HIGH VOLTAGE SUBSTATION CONNECTORS We have been actively engaged in the design, development and production of substation power connectors for Extra High Voltage () applications since 97. The experience gained through research and development in designing substation connectors for use at low voltage levels helped in planning ahead for the era. The use of Extra High Voltage has evolved as an economic necessity rather than a glamorous alternate. With large generating stations being located at fuel availability points in remote areas, plus the requirement for utility interconnections, the need is increasing to transfer larger and larger blocks of power over greater distances. Extra High Voltage was and is necessary; however, existing designs of equipment and connectors had to be altered to handle the higher voltages. connectors must operate free of corona and maintain the mechanical strength and current transfer capabilities required of other power connectors. As an established leader in the Extra High Voltage substation connector market, we were one of the KV connector pioneers and the first manufacturer to supply connectors for 00 and 7 KV substations. And, a major percentage of the connectors in service today were designed and supplied by us. Our continuing efforts have aided the electrical industry in the development of design standards and performance criteria for these connectors. Our goals coincide with those of the electric utility industry to provide an ever improving product at the lowest possible price.

4 SUBSTATION TERMINALS BOLTED TERMINALS FOR TUBE TO FLAT PAD TYPE HVSTF/EVSTF Aluminum alloy, tube to flat, terminal connectors are designed for corona free service at and 00 KV respectively. Tongue mounting hardware is not furnished as part of this catalog number. Hardware must be ordered separately, specifying thickness of the pad to be clamped. The hardware shield is furnished as part of this catalog number. Tongue holes have NEMA spacing. Contact sealant is recommended. Terminals with side formed contact may be ordered by adding -SF to catalog number (example: HVSTF--D-SF). HVSTF/EVSTF Castings -T aluminum alloy Clamping Hardware aluminum alloy KV AND 00 KV LINE-TO-LINE APPLICATIONS kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE TUBING IPS/EHIPS DIMENSIONS - INCHES (MM) A C F LBS.(KG) KV APPLICATIONS HVSTF0D (.0) / (8.7) 8.0 (.) HVSTFD / (9.8) (.0) 8.9 (.0) HVSTF0D HVSTFD / (07.9) / (77.79) / (8.) 7/ (8.) 77/8 (00.0) 9. (.7) 9.8 (.) HVSTF0D / (07.9) 9/ (90.9) 8/8 (.7) 0.7 (.8) 00 KV APPLICATIONS EVSTFD (7.00) / (8.) 77/8 (00.0). (.99) EVSTF0D (7.00) / (8.) 77/8 (00.0). (.9) EVSTFD (7.00) 9/ (90.9) 8 (0.0).8 (.7) EVSTF0D (7.00) / (9.8) 87/8 (0.0). (.) EVSTF0D (.0) / (09.) 0 (.00) 9.9 (9.0)

5 HVCF SUBSTATION TERMINALS BOLTED TERMINALS FOR CABLE TO FLAT PAD TYPE HVCF Aluminum alloy, cable to flat, terminals are designed for corona free service at and 00 KV respectively. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. (See Type EVHS-D bolt shields.) Bolt shields must be used on both sides of pad to assure corona free performance. Tongue holes have NEMA spacing. Contact sealant is recommended. Add suffix: -HS for one hardware shield, and -HS for two hardware shields. Castings -T aluminum alloy Clamping Hardware aluminum alloy kv AND 00 kv LINE-TO-LINE APPLICATIONS HVCF7D HVCF00D HVCF8D.8-.8 HVCFD.-. CONDUCTOR RANGE DIMENSIONS-INCHES (MM) DIA. IN. AAC ACSR (AL/ST) A T W J L LBS.(KG) HVCF8D Clamping Bolts (7 Str.) ( Str.) (7 Str.) ( Str.) (9 Str.) ( Str.) (9 Str.) ( Str.) ( Str.) (9 Str.) (7 Str.) (9 Str.) (7 Str.) /9 /7 /7 /7 0/9 /7 /7 /7 /7 /9 /9 /7 /9 /9 /7 /9 7/7 8/9 / (7.) / (9.0) / (9.0) / (9.0) 7/8 (.) (.0) (.0) (.0) (7.8) /8 (0.8) (9.70) 8/8 (.7) 8/8 (.7) 8/ (09.) 8/ (09.) (79.). (.). (.). (.).7 (.0). (.)

6 Aluminum alloy, cable to flat, terminals are designed for corona free service at KV. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Bolt shields must be used on both sides of pad to assure corona free performance. Tongue holes have NEMA spacing. Contact sealant is recommended. SUBSTATION TERMINALS BOLTED TERMINALS TWO CABLES TO FLAT PAD TYPE HVCF HVCF Castings -T aluminum alloy Clamping Hardware aluminum alloy Add suffix: -HS for one hardware shield, and -HS for two hardware shields. kv AND 00 kv LINE-TO-LINE APPLICATIONS HVCF08D HVCFD.0. HVCF9D.09.9 HVCF00D CONDUCTOR RANGE DIMENSIONS-INCHES (MM) DIA. IN. AAC ACSR A T L W J B LBS.(KG) 0 ( Str.) (9 Str.) 79 (7 Str.) (9 Str.) 87. (7 Str.) ( Str.) 9 (7 Str.) ( Str.) (7 Str.) 9 ( Str.) (7 Str.) 0. ( Str.) 00 (9 Str.) 7 ( Str.) / /7 /7 8/ /. /7 /7 /7 79 /7 /7 0/9 87. /7 79 /7 0/9 0. / 0. /7 /7 /7 /9 (.0) (.0) (.0) (.0) 8 (.90) 8 (.90) 8 (.90) 8 (.90) 9/8 (.78) 9/8 (.78) 9/8 (.78) 9/8 (.78) (7.8) (7.8) (7.8) (7.8).9 (.).9 (.).9 (.).9 (.) HVCF8D.8.8 HVCFD.. HVCF0D (9 Str.) ( Str.) 00 (9 Str.) ( Str.) 90 (9 Str.) 900 (7 Str.) 000 (9 Str.) (7 Str.) /9 7 /9 7 /9 / /9 (.0) (.0) (.0) 8 (.90) 8 (.90) 8 (.90) 9/8 (8.) 9/ (7.) 0/8 (.) / (0.) / (.) / (.) 7.8 (.) 8. (.8) 8.7 (.9) *HVCF8D (9 Str.) (7 Str.) 7 7/7 8/9 / (7.) (.0) / (8.7) /8 (8.8) (.8). (.) * Furnished with clamping bolts.

7 CCL- SUBSTATION TERMINALS COMPRESSION TERMINALS FOR CABLE TYPE CCL- Aluminum compression terminal connectors are designed for corona free service at 00 KV. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. These connectors can be compressed with conventional tooling. The barrel is factory inhibited and the entire connector is sealed in a clear plastic bag. Tongue mounting hardware and bolt shields are not part of this catalog number, and must be ordered separately. For angle terminals add to the catalog number (example: CCL-9-D--). For conductors not shown and for angles other than, contact factory for information and dimensions. Pad holes have NEMA spacing. Contact sealant is recommended. Casting 99 aluminum alloy For use with conventional compression tooling refer to chart CC-87 for tool and die information see page 8. Add -XY for double contact surfaces. CONDUCTOR RANGE DIMENSIONS-INCHES (MM) DIA. IN. AAC ACSR DIE REF. FIGURE A T L CCL0D (7 Str.) 0/9 8 / 7/ ( Str.) 7. /7 (.90) (9.0) (.) 79 / CCL0D /7 8 / 7/ /7 (.90) (9.0) (.) /7 CCL08D CCLD.. CCL9D..9 CCLD.09. CCL99D.9.0 CCL8D.8.8 CCLD.. CCLD.0.8 CCL9D.0.9 (7 Str.) 87. ( Str.) (7 Str.) 900 (9 Str.) ( Str.) (7 Str.) 9 ( Str.) 000 ( Str.) (7 Str.) 0. ( Str.) 00 (9 Str.) ( Str.) 9. ( Str.) 00 (9 Str.) 0 (9 Str.) 7 ( Str.) 00 (9 Str.). ( Str.) 00 (9 Str.) ( Str.) 00 (9 Str.) ( Str.) 90 (9 Str.) 0. ( Str.) 00 (7 Str.) 700 (7 Str.) 70 (7 Str.) 800 (7 Str.) 000 (9 Str.) 000 (7 Str.) CCL7D.70.7 CCL8D.7.8 kv AND 00 kv LINE-TO-LINE APPLICATIONS (9 Str.) 00 (7 Str.) 7. 0/9 /7 79 /7 /7 /7 900 /7 79 0/9 9 8/ 87 /7 /7 9 /7 0. / /7 0. /7 /7 /9 9. /7 9. /9 /7 7 /9. /7. /9 /7 /9 0. /7 90 /7 0. /9 90 / / /7 8/ CCL90D (9 Str.).97 CCL99D (7 Str.).97 CCL0D.0 00 (7 Str.).97 8 (.90) 9/ (.9) 9/ (.9) 9/ (.9) 9/ (.9) 9/ (.9) 9/ (.9) 9/ (.9) 9/ (7.) 9/ (7.) 9/ (7.) 9/ (7.) 9/ (7.) 9 (.0) / (9.0) / (9.0) / (9.0) / (9.0) / (9.0) / (9.0) / (9.0) / (9.0) (.0) (.0) (.0) (.0) (.0) (.0) 7/8 (.) (7.8) (7.8) (7.) (7.8) (7.8) (7.8) (7.8) (9.8) (9.8) (9.8) (9.8) (9.8) (9.8) LBS.(KG).8 (.7).7 (.).9 (.).0 (.8).0 (.8). (.9). (.9).9 (.77).9 (.77).9 (.77). (.8). (.99). (.99). (.99). (.99). (.99)

8 SUBSTATION TERMINALS SHORT BARREL COMPRESSION TERMINALS FOR CABLE TYPE CCLS- Aluminum compression terminal connectors are designed for corona free service at 00 KV. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. These connectors can be compressed with conventional tooling. The barrel is factory inhibited and the entire connector is sealed in a clear plastic bag. Tongue mounting hardware and bolt shields are not part of this catalog number, and must be ordered separately. Short barrel requires less space and allows faster installation. CCLS- Pad holes have NEMA spacing. Contact sealant is recommended. For angle terminals add - to catalog number (example CCLS--D-) Casting 99 aluminum alloy For use with conventional compression Tooling, refer to chart C-8 for tool and die information see page 8. Add -XY for double contact surfaces. TYPE CCLS- COMPRESSION TERMINALS FOR CABLE kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR RANGE CABLE DIA. INCHES DIE REF. DIMENSIONS-INCHES (MM) A T L WEIGHT CCLS08D (98.) 8 (0.0). CCLSD (98.) 8 (0.0). CCLSD (98.) 8 (0.0). CCLS00D CCLSD...0 CCLS0D..0.0 / (.) / (.) /8 (.) 0 (9.88) 0 (9.88) 0/ (7.0)..0.9 CCLSD.0..0 /8 (.) 0/ (7.0).9 CCLS9D / (.0) (79.0). CCLS7D / (.0) (79.0). CCLS8D.8.7 / (.0) (79.0). CCLS99D.99. / (7.) / (9.0) /8 (07.98).8 CCLS0D.0.70 / (7.) / (9.0) /8 (07.98).8

9 ACF SUBSTATION TERMINALS TERMINALS LONG BARREL COMPRESSION CABLE TO FLAT Jumper terminals are prefilled with inhibitor. Pad holes have NEMA spacing. Seamless Extruded Aluminum Tube For use with conventional hex die tooling Available with, or 90 degree angled pad. Example: ACF9N for deg. pad angle. IDENTIFICATION: CONDUCTOR DIAMETER RANGE DIE SIZE, MIN PRESS SIZE DATE CODE, HPS NO. kv AND 00 kv LINE-TO-LINE APPLICATIONS AAC KCMIL ACF08N ACF9N ACFN 00 ACF0N 0. ACF8N ACF0N ACFN 70 ACF700N 000 ACF7N 0 00 ACF8N 00 ACSR KCMIL (STR) (0/9) 7. (/7) (/7) (0/9) 79 (/7) (/7) (/7) 7. (0/9) 79 (/7) (/7) (/7) 79 (/7) (0/9) 9 (/) (/7) (/7) 79 (0/9) 9 (/7) (/7) 9 (0/9) 0. (/7) (/7) (/7) (/9) 9. (/7) (/9) 9. (/9) 7 (/7) (/9). (/7). (/9) (/7) (/9) 0. (/7), 90 (/7) 0. (/9) 90 (/7) (/9) 780 (8/9), 89 (8/7) 0. (7/7), 07 (7/9) 7 (7/7) (8/9) (8/9) (7/9) O.D. (IN) STD COND. (COMPACT / TW) ( ) ( ) ( ) ( ).0 -. (.09 -.) (. -.) (. -.9). -.0 (.0 -.8).0 -. (.8 -.) (. -.) (. -.08) ( ) COMPR. DIES 0AH L77 0AH L77 AH L77 AH L77 AH L78 MIN. PRESS (TONS) PAD DETAILS BOLT HOLES WIDTH (IN) LENGTH BEFORE COMPR. (IN) AH AH L7 NOTES:. These terminals are also recommended for AAAC and ACAR conductors within the diameter ranges listed.. Terminals are pre-filled with Anderson/Fargo standard joint compound. Consult factory for terminals pre-filled with high performance, conductive-grit compound type HTJC AH AH AH NET WEIGHT LB (KG).0 (.9).0 (.9).8 (.7).7 (.). (.). (.9). (.9). (.0). (.). (.)

10 SUBSTATION TERMINALS TERMINALS SHORT BARREL COMPRESSION CABLE TO FLAT Jumper terminals are prefilled with inhibitor. Pad holes have NEMA spacing. For use with conventional hex die tooling Available with, or 90 degree angled pad. Example: ACFS9N for deg. pad angle. IDENTIFICATION: CONDUCTOR DIAMETER RANGE DIE SIZE, MIN PRESS SIZE DATE CODE, HPS NO. ACFS kv AND 00 kv LINE-TO-LINE APPLICATIONS AAC KCMIL ACFS08N ACFS9N ACFSN 00 ACFS0N 0. ACFS8N ACFS0N ACFSN 70 ACFS700N 000 ACSR KCMIL (STR) (0/9) 7. (/7) (/7) (0/9) 79 (/7) (/7) (/7) 7. (0/9) 79 (/7) (/7) (/7) 79 (/7) (0/9) 9 (/) (/7) (/7) 79 (0/9) 9 (/7) (/7) 9 (0/9) 0. (/7) (/7) (/7) (/9) 9. (/7) (/9) 9. (/9) 7 (/7) (/9). (/7). (/9) (/7) (/9) 0. (/7), 90 (/7) 0. (/9) 90 (/7) (/9) 780 (8/9), 89 (8/7) 0. (7/7), 07 (7/9) 7 (7/7) (8/9) (8/9) (7/9) O.D. (IN) STD COND. (COMPACT / TW) ( ) ( ) ( ) ( ).0 -. (.09 -.) (. -.) (. -.9). -.0 (.0 -.8).0 -. (.8 -.) (. -.) COMPR. DIES 0AH L77 0AH L77 AH L77 AH L77 AH L78 MIN. PRESS (TONS) PAD DETAILS BOLT HOLES WIDTH (IN) LENGTH BEFORE COMPR. (IN) AH AH L AH ACFS7N (. -.08) ACFS8N ( ) NOTES:. These terminals are also recommended for AAAC and ACAR conductors within the diameter ranges listed.. Terminals are pre-filled with Anderson/Fargo standard joint compound. Consult factory for terminals pre-filled with high performance, conductive-grit compound type HTJC. AH AH NET WEIGHT LB (KG).7 (.77).7 (.77). (.09). (.09).7 (.).0 (.).7 (.8).9 (.77). (.0). (.0) 7

11 WSTFE- SUBSTATION TERMINALS EXTERNAL WELDED TERMINALS FOR TUBE TO FLAT PAD TYPE WSTFE- Aluminum alloy tube to flat terminals are designed for corona free service at and 00 KV. Terminals with center-formed contact may be ordered by adding CF to the catalog number (example: WSTFE-0-D-CF-). The hardware shield is included as part of this catalog number. Tongue hardware is not furnished as part of this catalog number. Hardware must be ordered separately, specifying thickness of pad to be clamped. Pad holes have NEMA spacing. Contact sealant is recommended after welding. Castings -T aluminum alloy Bolt Shield -T aluminum alloy kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS/EHIPS DIMENSIONS - INCHES (MM) A T WSTFE0D / (.).9 (.77) WSTFE0D / (7.). (.77) 8 WSTFE0D WSTFE0D / (9.8) (88.90) 7. (.) 0.8 (.90) WSTFEDCF (0.80).0 (.07) WSTFE0NCF* (0.80) 0.88 (.) 8. (.8) WSTFE0NCF* (0.80).0 (.). (.0) WSTFE0NCF* (88.90).0 (.). (.0) WSTFE0KCF / (7.) 8.0 (.) WSTFE0KCF * Includes Hardware Shields / (9.8) 9. (.)

12 SUBSTATION TERMINALS INTERNAL WELDED TERMINALS FOR TUBE TO CENTER-FORMED FLAT PAD TYPE WSTFX- WSTFX- Aluminum alloy, tube to flat, terminal connectors are designed for corona free service at and 00 KV. Only one side of the contact tongue is machined. Casting is chamfered for proper welding fit. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Specify H in catalog number if Schedule 80 EHIPS tubing is to be used. (example: WSTFXH-0-D-CF-.) Tongue holes have NEMA spacing. Contact sealant is recommended for contact pad after welding. Castings -T aluminum alloy Add suffix: HS for one hardware shield, and HS for two hardware shields. kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE TUBING IPS WSTFXDCF WSTFX0DCF WSTFXDCF WSTFX0DCF WSTFX0DCF WSTFX0DCF DIMENSIONS INCHES (MM) A T L (8.0) / (.) / (.) (0.80) (0.80) (.0) / 7/8 (9.0) (.0) (.0) 7 (77.80) 7/ (8.) 7/ (8.) 7 (9.8) 7 (9.8) 8 (0.0). (.8). (.99).7 (.).7 (.8).8 (.8). (.9) 9

13 SUBSTATION TERMINALS WSTFXH- Aluminum alloy, tube-to-flat terminal, designed for corona-free service, on EHIPS, schedule 80 bus up to 00kV. Two bolt shields are required and included: Castings -T aluminum alloy Note: When mounting to unshielded equipment pad, two additional hardware shields (EVHSD) must be used to ensure corona-free performance. Pad bolting hardware is not included. Bolt lengths depend on thickness of mating pad to be clamped. Ampacity is,000 amps outdoors with ft/sec cross wind and normal oxidized surface, when installed with type HTJC Inhibitor compound and the two EVHSD hardware shields provided. 0 CONDUCTOR SIZE EHIPS WSTFXH0NCF DIMENSIONS INCHES (MM) A L T.7 (0.) 8.0 (0).0 (.) 7. (.)

14 SUBSTATION TERMINALS EXTERNAL WELDED TERMINALS FOR TUBE TO TWO FLAT PADS TYPE WSTF- Aluminum alloy weldment, tube to double flat, terminal is designed for corona free service at and 00 KV when bolt shields are installed. This catalog number does not include hardware shields or mounting hardware. Contact sealant is recommended for contact pads after welding. Castings -T aluminum alloy Pads 0-T WSTF- Add suffix: HS for one hardware shield, and HS for two hardware shields. kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE TUBING IPS/EHIPS WSTFD WSTF0D WSTFD WSTF0D WSTF0D WSTF0D DIMENSIONS INCHES (MM) A (.0) (.0) (.0) / (.7) / (.7) (8.0) C (.0) (.0) (.0) 7/8 (7.) 9/8 (8.) / (7.). (.0).9 (.7). (.).9 (.). (.). (.09)

15 WCF- SUBSTATION TERMINALS WELDED CABLE TERMINALS FOR CABLE TO FLAT PAD TYPE WCF- Aluminum alloy, cable to flat pad, terminal connectors are designed for corona free service at KV. Tongue holes have NEMA spacing. Cable should be positioned /8 to / from edge inside barrel prior to puddle welding. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Corona rings, terminal equipment or bolt shields must be used on both sides of pad to assure corona free performance. Contact sealant is recommended for contact pads after welding. Casting -T aluminum alloy Add suffix: -HS for one hardware shield, and -HS for two hardware shields. kv LINE-TO-LINE APPLICATIONS WCF0D WCFD.0.08 WCF7D.09. WCFD.0.7 WCF9D.09. WCFD.. CONDUCTOR RANGE DIMENSIONS-INCHES (MM) LBS. DIA. IN. AAC ACSR A L T (KG) 70 ( Str.) (7 Str.) 79 ( Str.) 800 ( Str.) (7 Str.) 87. ( Str.) (9 Str.) 900 ( Str.) 9 (7 Str.) 000 ( Str.) 0. (7 Str.) ( Str.) 00 (9 Str.) ( Str.) 00 (9 Str.) 00 (9 Str.) WCFD.0.. ( Str.) WCF7D.. WCFD..0 WCFD (9 Str.) 00 (9 Str.) 90 ( Str.) (9 Str.) 700 (7 Str.) 70 (7 Str.) 900 (7 Str.) 0/9. /7 /7 7. 0/9 /7 79 / /7 79 /7 /7 79 0/9 9 /7 0. /7 9 /7 /9 9. /9 7 /7 7 /9. /7 /9 90 /7 90 /9 WCF7D (9 Str.) WCF8D.79.7 WCF88D (9 Str.) (7 Str.) 7 7/7 8/9 / (.) / (.) / (.) / (.) (0.80) (0.80) (0.80) (0.80) (.0) (.0) (.0) (7.0) (7.0) (.0) (.0) (.0) (.0) / (8.7) / (8.7) / (8.7) / (8.7) / (7.) / (7.) / (7.) 7/ (8.) 7/ (8.) 9/ (.0) 9/ (.0) 9/ (.0) 9/ (.0) / (9.0) / (9.0). (.8). (.8). (.8). (.8). (.). (.). (.7). (.7).8 (.8).8 (.8).8 (.8).7 (.).7 (.)

16 SUBSTATION TERMINALS WELDED CABLE TERMINALS TWO CABLES TO FLAT PAD TYPE WCF- Aluminum alloy, cable to flat pad, terminal connectors are designed for corona free service at KV. Tongue holes have NEMA spacing. Cable should be positioned /8 to / from edge inside barrel prior to puddle welding. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Corona rings, terminal equipment or bolt shields must be used on both sides of pad to assure corona free performance. Contact sealant is recommended for contact pads after welding. WCF- Castings -T aluminum alloy Add suffix: -HS for one hardware shield, and -HS for two hardware shields. kv LINE-TO-LINE APPLICATIONS WCF0D WCFD.0.08 WCF7D.09. WCFD.0.7 WCF9D.09. WCFD.. CONDUCTOR RANGE DIMENSIONS-INCHES (MM) LBS. DIA. IN. AAC ACSR A L T (KG) 70 ( Str.) (7 Str.) 79 ( Str.) 800 ( Str.) (7 Str.) 87. ( Str.) (9 Str.) 900 ( Str.) 9 (7 Str.) 000 ( Str.) 0. (7 Str.) ( Str.) 00 (9 Str.) ( Str.) 00 (9 Str.) 00 (9 Str.) WCFD.0. ( Str.) WCF7D.. WCFD..0 WCFD (9 Str.) 00 (9 Str.) 90 ( Str.) (9 Str.) 700 (7 Str.) 70 (7 Str.) 900 (7 Str.) 0/9. /7 /7 7. 0/9 /7 79 / /7 79 /7 /7 79 0/9 9 /7 9 /7 0. /7 /9 9. /9 7 /7 7 /9. /7 /9 90 /7 90 /9 WCF7D (9 Str.) WCF8D.79.7 WCF88D (9 Str.) (7Str.) 7 7/7 8/9 / (.) / (.) / (.) / (.) (0.80) (0.80) (0.80) (0.80) (.0) (.0) (.0) (7.0) (7.0) (.0) (.0) (.0) (.0) / (8.7) / (8.7) / (8.7) / (8.7) / (7.) / (7.) / (7.) 7/ (8.) 7/ (8.) / (7.) / (7.) / (7.) / (7.) / (9.0) / (9.0) / (9.0) (.) (.). (.77).7 (.77).7 (.77).7 (.77).7 (.).7 (.).7 (.).7 (.). (.). (.). (.).7 (.8).7 (.8)

17 HVRTE SUBSTATION TERMINALS WELDED EXPANSION TERMINALS FOR TUBE TO FLAT PAD TYPE HVRTE Aluminum alloy weldment, expansion terminal, is designed for corona free service at KV. This design provides ± inch expansion. The cables serves as the expansion part of the fitting as well as the corona rings. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Specify H in catalog number if Schedule 80 EHIPS tubing is to be used; example: HVRTEH-0-D. Castings -T aluminum alloy Cables aluminum alloy Refer to installation chart DC-8 on page 87 for instructions. Add suffix: -HS for one hardware shield, and -HS for two hardware shields. CONDUCTOR SIZE IPS HVRTED HVRTE0D HVRTED HVRTE0D HVRTE0D HVRTE0D kv LINE-TO-LINE APPLICATIONS DIMENSIONS INCHES (MM) A B C E 7/ (87.9) 7/ (87.9) 7/ (87.9) 7/ (87.9) 8 (7.0) 8 (7.0) / (.0) / (.0) / (.0) / (.0) 8/ (70.) 8/ (70.) 7/8 (.8) 7/8 (.8) 7/8 (.8) 7/8 (.8) /8 (0.8) /8 (0.8) / (9.0) / (9.0) / (9.0) / (9.0) (.0) (.0). (.0).8 (.).9 (.).0 (.). (.8). (.7)

18 SUBSTATION TERMINALS WELDED EXPANSION TERMINALS FOR TUBE TO FLAT PAD TYPE EVKET Aluminum alloy, tube to flat, compact expansion terminals are designed for corona free service at 00 KV. This design provides ± inch expansion. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Contact sealant is recommended for pads after welding. Specify H in catalog number if Schedule 80 EHIPS tubing is to be used; example: EVKETH-0-D. EVKET Castings -T aluminum alloy Shunts 00-D aluminum alloy Shield Mounting Hardware stainless steel Note: To obtain pad rotated 90, add V to catalog number; (example EVKETV-0-D). Refer to installation chart DC-99 on page 8 for instructions. Add suffix: -HS for one hardware shield, and -HS for two hardware shields. 90 ROTATED PAD EVKETV- CONDUCTOR SIZE IPS EVKETD EVKET0D EVKET0D EVKET0D 0 ft. maximum total bus length. * Height of Corona Shield kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS INCHES (MM) L W C T B * / (7.) (8.00) / (87.) (9.70) 8 (7.0) 8 (7.0) (.0) (.0) / (0.) (7.00) / (.) (9.70) / (9.0) 7/8 (.) (.0) (.0) 0/ 0/ / / 8. (8.0) 9.9 (9.0). (.0) 7. (.)

19 SUBSTATION TERMINALS EVKETVH Aluminum alloy, tube-to-flat, compact expansion terminal designed for corona-free service, on EHIPS, schedule 80 bus up to 00kV. Two bolt shields are required and included. This design provides ± inch expansion. Castings -T aluminum alloy Shunts 00D aluminum alloy Shield Mounting Hardware Stainless Steel Note: When mounting to unshielded equipment pad, two additional hardware shields (EVHSD) must be used to ensure corona-free performance. Pad bolting hardware is not included. Bolt lengths depend on thickness of mating pad to be clamped. Maximum bus length is 90 feet. Ampacity:,000A outdoors with ft/sec cross wind and normal oxidized surface, when installed with type HTJC Inhibitor compound and the two EVHSD hardware shields provided. 8 kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE EHIPS EVKETVH0N DIMENSIONS - INCHES (MM) L W C T.0 (0). ().0 (0).0 (.) SHIELD HEIGHT.7 (98).0 (.0)

20 SUBSTATION TERMINALS WELDED EXPANSION TERMINALS FOR TUBE TO FLAT PAD TYPE HVETF/EVETF Aluminum alloy, tube to flat, expansion terminals are designed for corona free service at and 00 KV respectively. This design provides ± inch expansion. Terminals with side formed contact may be ordered by adding SF to the catalog number (example: HVETF-0-D-SF). For additional equipment clearance, a pad extension may be ordered by adding E in the catalog number (example: HVETFE-0-D). When pad extension is specified, one hardware shield and hardware is furnished. Specify H in catalog number if schedule 80 EHIPS tubing is to be used; example: HVETFH-0-D. Pad mounting hardware is not furnished as part of this catalog number and must be ordered separately, specifying thickness of pad to be clamped. HVETF/EVETF Castings -T aluminum alloy Rings 0-T aluminum alloy Ring Brackets 0-T aluminum alloy Shunts 00-0 aluminum alloy Guide Mounting Hardware galvanized steel Ring Mounting Hardware aluminum alloy Refer to for installation chart DC-70 on page 87 for instructions. 7 kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS HVETF0D HVETFD HVETF0D RING DIAMETER (09.0) (09.0) (09.0) DIMENSIONS INCHES (MM) A T F J / (7.) / (8.7) / (7.) / (8.7) / (8.7) / (8.7) 8. (8.) 9. (8.89).9 (0.9) Continued on next page

21 SUBSTATION TERMINALS TYPES HVETF/EVETF WELDED EXPANSION TERMINALS FOR TUBE TO FLAT KV AND 00 KV LINE-TO-LINE APPLICATIONS (CONTINUED) kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS HVETFD HVETF0D HVETF0D HVETF0D EVETF0D EVETFD EVETF0D EVETF0D EVETF0D RING DIAMETER (09.0) (09.0) 0 (7.00) 0 (7.00) (09.0) (09.0) (09.0) 0 (7.00) 0 (7.00) DIMENSIONS INCHES (MM) A T F J KV APPLICATIONS (CONTINUED) 7 (77.80) 7/ (8.) 7/ (9.8) 8 (0.0) 00 KV APPLICATIONS / (7.) 7 (77.80) 7/ (8.) 7/ (9.8) 8 (0.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) / (8.7) (9.8) (9.8) (0.80) / (.8) / (.8) /8 (.8) /8 (.8) (.90).7 (.8) 8. (.79) 7. (.87).9 (9.0) 9. (.) 8. (7.).7 (.7) 0.7 (8.). (0.9) 8

22 SUBSTATION TERMINALS BIFURCATING TERMINALS ONE FLAT PAD TO TWO FLAT PADS TYPE EVTF-D Aluminum alloy, bifurcating terminals are designed for two terminations to a single flat pad. The connectors are corona free at 00 KV. When mounted on unshielded equipment tongue, bolt shield (catalog number EVHS-D) must be used to assure corona free performance. Mounting hardware should not project above recess. Bolt shields are not included as part of this catalog number. Connector will be corona free only if tap connectors are attached. Maximum terminal pad thickness is one inch. Contact sealant is recommended. Add -90 for tap pads in horizontal plane. EVTF-D Castings -T aluminum alloy Note: Contact factory to obtain center pad at special angles. 00 kv LINE-TO-LINE APPLICATIONS EVTFD EVTFD8 DIMENSIONS INCHES (MM) B (0.80) 8 (7.0) L 9/8 (8.78) /8 (8.8) APPROX WT EA LBS (KG). (0.9). (0.99) TRIFURCATING TERMINAL ONE FLAT PAD TO THREE FLAT PADS TYPE EVTF-D Aluminum alloy terminal is designed for corona free service at 00 KV. Hardware and terminals are not included and must be ordered separately. Maximum terminal pad thickness is one inch. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Contact sealant is recommended. Bolt shields not required on recessed pad connections. EVTF-D Castings -T aluminum alloy Weight. (.8 kg) 9

23 HVSTT/EVSTT SUBSTATION COUPLERS BOLTED COUPLERS FOR TUBE TYPE HVSTT/EVSTT Aluminum alloy, tube to tube, couplers are designed for corona free service at and 00 KV respectively. Contact sealant is recommended. Castings -T aluminum alloy Hardware aluminum alloy 0 CONDUCTOR SIZE TUBING IPS/EHIPS HVSTT HVSTT00 HVSTT HVSTT00 HVSTT00 HVSTT00 Continued on next page. kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS-INCHES (MM) MAIN TAP A L B W G / (07.9) / (07.9) (.0) (.0) KV APPLICATIONS 8/8 (0.8) 8/8 (0.8) 8 (9.08) 8 (9.08) /8 (07.98) /8 (07.98) / (07.9) / (07.9) (.0) (.0) (.0) 7/ (8.) 77/8 (00.0) 8/8 (.7) 9/ (.) 0/8 (.) (.0) 7/ (8.) 77/8 (00.0) 8/8 (.7) 9/ (.) 0/8 (.) 9. (.).9 (.). (7.9) 8. (.7).0 (.)

24 SUBSTATION COUPLERS BOLTED COUPLERS FOR TUBE TYPE HVSTT/EVSTT (CONTINUED) EVSTT00 EVSTT EVSTT00 EVSTT00 EVSTT00 EVSTT00 EVSTT00 EVSTT00 EVSTT00 CONDUCTOR SIZE TUBING IPS/EHIPS DIMENSIONS-INCHES (MM) MAIN TAP A L B W G Furnished with clamping bolts for and IPS tubing. kv AND 00 kv LINE-TO-LINE APPLICATIONS (7.00) (7.00) (7.00) (.0) (.0) (.0) (.0) (.0) (.0) 00 KV APPLICATIONS 0/8 (7.8) 0/8 (7.8) 0/8 (7.8) /8 (8.8) /8 (8.8) /8 (07.98) /8 (8.8) /8 (8.8) /8 (07.98) (7.00) (7.00) (7.00) (7.00) (7.00) (.0) (7.00) (7.00) (.0) 77/8 (00.0) 8 (0.0) 87/8 (.) 0 (.00) 0 (.00) 0 (.00) (79.0) (79.0) (79.0) 77/8 (00.0) 8 (0.0) 87/8 (.) 77/8 (00.0) 87/8 (.) 0 (.00) 77/8 (00.0) 87/8 (.) (79.0) 0. (9.) 7.7 (8.0). (0.70) 7. (.) 8.8 (.0). (.) 9.9 (.). (.79).7 (.)

25 WLI--/ WLI-90- WLI- SUBSTATION COUPLERS WELDED ANGLE COUPLERS FOR TUBE TYPE WLI--/WLI-90- Aluminum alloy, tube to tube, couplers are designed for corona free service at 00 KV. This is an internal fitting connector with sufficient chamfer adjacent to tube ends for proper welding. The fitting is of sufficient strength to give adequate support to the tubing. The smooth contoured surface of this connector is free of nicks and burrs, which make it suitable for high voltage corona free application. To specify for extra heavy schedule 80 EHIPS tubing, add H to catalog number; example: WLIH Castings - -T aluminum alloy WLI-90 kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE DIMENSIONS INCHES (MM) TUBING MAIN IPS TUBING TAP IPS A B 90

26 Aluminum alloy weldment couplers are designed for corona free service at, 00, and 7 KV levels. Slot provides for close fit regardless of tubing tolerance. The joint can be stiffened, if desired, by drilling four holes in the tubing at 90 lateral points and plug welding the tubing to the coupler. When joining two different bus sizes, add suffix to catalog number (example: WCI-00-, for coupling a IPS to a IPS). SUBSTATION COUPLERS WELDED COUPLERS FOR TUBE TYPE WCI WCI Castings - -T aluminum alloy Note: To specify coupler for extra heavy (Schedule 80, EHIPS) tubing add H to catalog number; example: WCIH-00. kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS DIMENSIONS INCHES (MM) L WCI00 WCI WCI00 WCI WCI00 WCI00 WCI00 WCI8OD/ WCI8OD Contact factory for sizes not shown. 8 O.D. / Thick wall 8 O.D. Thick wall (0.80) (8.00) 8 (7.0) 8 (7.0) (09.0) (09.0) (09.0) (09.0) (09.0). (.8). (.0). (.9). (.) 7. (.) 9.7 (.0).7 (.7). (.). (.)

27 SUBSTATION COUPLERS EVWETTR Aluminum alloy, tube-to-tube coupler, designed for corona-free service up to 00kV. Coupling is mechanically reinforced via an internal slotted coupler/guide tube. This design provides ± inch expansion. Castings -T aluminum alloy Shunts 00 aluminum alloy Mounting Hardware Galvanized Steel Note: For EHIPS, schedule 80 bus tube design, add H to catalog number. Example: EVWETTRH0. Maximum bus run 90 ft. kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS EVWETTR0 DIMENSIONS - INCHES (MM) L W B S 9. (9). (9).7 (98) 0.8 (0.) 0. (7.)

28 SUBSTATION COUPLERS WELDED TRIFURCATING COUPLERS FOR TUBE TO THREE FLAT PADS TYPE EVSTF Aluminum alloy, tube to flat, trifurcating couplers are designed for corona free service at 00 KV. They are designed to be used with Type CCL- compression terminal lugs with maximum terminal pad thickness of one inch. Contact sealant is recommended for contact pads after welding. EVSTF Castings - -T aluminum alloy Bolt shields not required on recessed pad connections. kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS/EHIPS EVSTF0 EVSTF EVSTF0 EVSTF0 EVSTF0. (7.9). (7.). (7.8).7 (7.8).9 (7.7)

29 EVSTF FACTORY WELD FIELD WELD SUBSTATION COUPLERS WELDED BIFURCATING COUPLERS FOR TUBE TO FLAT PADS TYPE EVSTF 9/ HOLES Aluminum alloy, tube to flat, bifurcating couplers are designed for corona free service at 00 KV. They are designed to be used with Type CCL- compression terminal lugs with maximum terminal pad thickness of one inch. Contact sealant is recommended for contact pads after welding. Castings - -T aluminum alloy Cross Brace - 0-T aluminum alloy Note: To obtain tongues finished on both sides, add XY to catalog number (Example: EVSTF-0-8-XY) Connector will be corona free only if tap connectors are attached. Bolt shields not included as part of these catalog numbers. FACTORY WELD H FIELD WELD kv AND 00 kv LINE-TO-LINE APPLICATIONS A B H TUBE EVSTF0 EVSTF08 EVSTF0 EVSTF08 EVSTF090 EVSTF0908 EVSTF090 EVSTF0908 (0.8) 8 (7.) (0.8) 8 (7.) (0.8) 8 (7.) (0.8) 8 (7.) 9/8 (8.) /8 (.) 9/8 (8.) /8 (.) 9/8 (8.) /8 (.) 9/8 (8.) /8 (.) (90.) (90.) / (07.9) / (07.9) 0.9 (9.9). (9.7) 9.7 (8.9). (0.0) 0.9 (9.9). ( (8.9). (0.0)

30 SUBSTATION TEES BOLTED TEE CONNECTORS TUBING MAIN TO TUBING TAP TYPE HVTTT/EVTTT Aluminum alloy, tube to tube, tee connectors are designed for corona free service at and 00 KV respectively. Contact sealant is recommended. HVTTT/EVTTT Castings - -T aluminum alloy Hardware - aluminum alloy CONDUCTOR SIZE TUBING MAIN IPS/EHIPS HVTTT00 HVTTT0 HVTTT HVTTT00 HVTTT0 HVTTT00 HVTTT0 HVTTT HVTTT0 HVTTT Continued on next page kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS-INCHES (MM) TUBING TAP IPS/EHIPS W C A G KV APPLICATIONS / (07.9) / (07.9) / (07.9) / (07.9) 7/ (8.) 7/8 (87.) 7/8 (87.) 7/ (9.8) 7/ (9.8) 7/ (9.8) 8/ (0.79) 8/ (0.79) 8/ (0.79) 8/ (7.0) / (07.9) / (8.7) / (8.7) (.0) / (8.7) (.0) 7/ (8.) / (8.7) (.0) 7/ (8.) 77/8 (00.0) 8. (.7) - 0. (.) (.)

31 8 SUBSTATION TEES TYPES HVTTT/EVTTT (CONTINUED) CONDUCTOR SIZE TUBING MAIN IPS/EHIPS HVTTT00 HVTTT0 HVTTT00 HVTTT0 HVTTT00 HVTTT00 HVTTT0 HVTTT00 HVTTT0 HVTTT00 HVTTT00 HVTTT00 HVTTT0 HVTTT00 HVTTT0 HVTTT00 HVTTT00 HVTTT00 EVTTT00 EVTTT0 EVTTT EVTTT00 EVTTT0 EVTTT00 EVTTT00 EVTTT0 EVTTT00 EVTTT00 EVTTT00 EVTTT0 EVTTT00 EVTTT00 EVTTT00 Furnished with clamping bolts for IPS and IPS. DIMENSIONS-INCHES (MM) TUBING TAP IPS/EHIPS W C A G KV APPLICATIONS (CONTINUED) / (07.9) / (07.9) / (07.9) / (07.9) / (07.9) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) 8/ (.) 8/ (.) 8/ (.) 89/ (7.9) 89/ (7.9) 8/ (.) 8/ (.) 8/ (.) 9 (8.0) 9 (8.0) 0/ (7.0) 9/ (.) 9/ (.) 9/ (.) 99/ (.89) 99/ (.89) / (87.) / (87.) 00 KV APPLICATIONS 9/ (7.00) (0.9) (7.00) (7.00) (7.00) (7.00) (7.00) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) 9/8 (.78) 9/8 (.78) 99/ (.89) 99/ (.89) 99/ (.89) 0/8 (7.8) 0/8 (7.8) 0/8 (7.8) /8 (8.8) 0 (9.88) 0 (9.88) 0 (9.88) (9.8) (9.8) / (07.9) / (07.9) / (07.9) / (07.9) (.0) / (07.9) / (07.9) (.0) (.0) (7.00) (7.00) (7.00) (7.00) (7.00) (7.00) (7.00) (7.00) (7.00) (.0) (7.00) (7.00) (7.00) (.0) (.0) / (8.7) (.0) 7/ (8.) 77/8 (00.0) 8/8 (.7) / (8.7) (.0) 7/ (8.) 77/8 (00.0) 8/8 (.7) 9/ (.) / (8.7) (.0) 7/ (8.) 77/8 (00.0) 8/8 (.7) 9/ (.) 0/8 (.) 77/8 (00.0) 77/8 (00.0) 8 (0.0) 77/8 (00.0) 8 (0.0) 87/8 (.) 77/8 (00.0) 8 (0.0) 87/8 (.) 0 (.00) 77/8 (00.0) 8 (0.0) 87/8 (.) 0 (.00) (79.0) -.8 (.8) (7.7) (.07) 7. (.). (.79) 0. (9.) -.7 (.7).0 (0.) -. (0.98) 7. (.).9 (.9) 8.9 (.).7 (.7) 9.9 (.) (.9).9 (.7)

32 SUBSTATION TEES BOLTED TEE CONNECTORS TUBING MAIN TO FLAT PAD TYPE HVTTF/EVTTF Aluminum alloy, tube to flat, tee connectors are designed for corona free service at and 00 KV respectively. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Tongue holes have NEMA spacing. Contact sealant is recommended. HVTTF/EVTTF Castings -T aluminum alloy Hardware aluminum alloy Add suffix: -HS for one hardware shield, and -HS for two hardware shields. kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE TUBING MAIN IPS/EHIPS DIMENSIONS INCHES (MM) W C T J KV APPLICATIONS HVTTF0D HVTFFD HVTTF0D HVTTF0D HVTTF0D HVTTF0D EVTTF0D EVTTF0D EVTTF0D EVTTF0D Furnished with clamping bolts for IPS and IPS. / (07.9) (.0) (.0) (7.00) (7.00) (.0) (.0) 7 (90.0) 7 (90.0) 77/8 (00.0) 87/ (.) 8/ (7.0) 97/ (9.7) 00 KV APPLICATIONS 8/ (07.9) 8/ (0.) 9/ (.9) 9/ (7.) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0) (.0). (.9).9 (.) 8.8 (.99) 0. (.0).9 (.) 7. (7.9).7 (.). (.) 8.8 (8.) 0. (9.) 9

33 EVTCF W SUBSTATION TEES BOLTED TERMINALS FOR CABLE TO FLAT PAD TYPE EVTCF Aluminum alloy, cable to flat, tee connectors are designed for corona free service at and 00 KV respectively. This catalog number does not include tongue mounting hardware or bolt shields; these components must be ordered separately. Tongue holes have NEMA spacing. Contact sealant is recommended. To assure corona free operation, cable clamping hardware must be inserted from terminal body side as shown. Castings -T aluminum alloy Hardware aluminum alloy Add suffix: -HS for one hardware shield, and -HS for two hardware shields. A T FIGURE 0 FIGURE kv AND 00 kv LINE-TO-LINE APPLICATIONS CABLE SIZE O.D. FIGURE # EVTCF7D* 8/9 ACSR.7 EVTCF8D 00 MCM AAC.8 DIMENSIONS INCHES (MM) C W H T 7 (90.0) 7/8 (80.98) 0 (.00) / (7.) 0/ (0.) 97/8 (0.8) / (9.0) / (9.0).7 (.7).0 (.99)

34 SUBSTATION TEES Aluminum alloy, cable to cable tee connectors are designed for corona free service at and 00 KV respectively. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. Contact sealant is recommended. BOLTED TEE CONNECTORS CABLE MAIN TO CABLE TAP TYPE HVTBCC/EVTBCC HVTBCC/ EVTBCC Castings -T aluminum alloy Hardware aluminum alloy kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR DIA. IN. HVTBCC HVTBCC.. HVTBCC HVTBCC.. HVTBCC.. HVTBCC HVTBCC HVTBCC HVTBCC8.8. HVTBCC HVTBCC HVTBCC HVTBCC Continued on next page. DIMENSIONS INCHES (MM) OF BOLTS REQ D. MAIN TAP W C A G J JJ MAIN TAP / (7.) / (7.) / (7.) / (7.) / (7.) / (7.) / (7.) /8 (.9) /8 (.9) 7/ (.) 7/ (.89) 7/ (.89) 9/ (.9) 9 (.8) 9 (.8) 7/8 (7.) 9 (.8) 7/8 (7.) 9 (.8) 9 (.8) KV APPLICATIONS / (7.) / (7.) / (7.) / (7.) / (7.) 7/ (.7) 7/ (.7) (7.8) / (.) / (.) 7/8 (.8) (9.70) (9.70) / (.) (9.70) / (.) (9.70) (9.70) 7.7 (.0) 7.7 (.0). (7.9)

35 SUBSTATION TEES BOLTED TEE CONNECTORS FOR CABLE TO CABLE (CONTINUED) TYPES HVTBCC/EVTBCC KV AND 00 KV LINE-TO-LINE APPLICATIONS CONDUCTOR DIA. IN. EVTBCC.. EVTBCC EVTBCC.. EVTBCC.. EVTBCC EVTBCC EVTBCC EVTBCC8.8. EVTBCC EVTBCC EVTBCC EVTBCC DIMENSIONS INCHES (MM) OF BOLTS REQ D. MAIN TAP W C A G J JJ MAIN TAP (7.00) (7.00) (7.00) (7.00) (7.00) (.0) 7 (90.0) 7 (90.0) 7 (90.0) 7 (90.0) 7 (90.0) 7 (90.0) 00 KV APPLICATIONS 7 (9.8) 7/ (9.) 7/ (98.) 7/ (98.) 7/ (98.) 8/ (7.0) 0/ (.90) 8/ (0.79) 09/ (8.9) 8/ (0.79) 09/ (8.9) 09/ (8.9) (7.00) (7.00) (7.00) (7.00) (7.00) (.0) 7 (90.0) (7.00) 7 (90.0) (7.00) 7 (90.0) 7 (90.0) (7.00) /8 (0.8) /8 (.) /8 (.) /8 (.) (.) / (.) /8 (.) 7/8 (9.) /8 (.) 7/8 (9.) 7/8 (9.) (7.70) (7.70) (7.70) (7.70) 9.8 (.) 8. (8.) 8. (8.0) 9.0 (8.) 9. (8.8) 9. (8.8)

36 SUBSTATION TEES TEE-TAPS COMPRESSION CABLE TO CABLE-OPEN RUN AAC, ALLOY, ACAR AND ACSR CONDUCTORS Aluminum compression tee connectors are designed for corona free service at 00 KV. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. Tap barrel is prefilled with inhibitor, ends are capped and tapers are coated with protective plastic. ORT Seamless Extruded Aluminum Alloy Tube NO. ORT XX XX O.D. IN. (MM).0 -. ( ).0 -. (9.0 -.). -.0 (. -.8). -. (.9 -.) CONDUCTOR RANGE () AAC SIZE KCMIL 79, 800, 87., 900, 9 ACSR SIZE KCMIL (STR) 7. (/7) (0/9), 79 (/7) (.7) (/7) 79 (/7) 79 (/) 900 (/7) 000, (0/9) 00, 9., 00, 0, 7, 00., 00,, 00, , 00, , 800, , 0, 00 kv AND 00 kv LINE-TO-LINE APPLICATIONS 79. (0/9), 900 (/7), 9 (/7) (/7), 0 (/) (/7) 9 (0/9), (/7) (/9), 9. (/7), 7 (/) 9. (/9), 7 (/7) (/9),. (/7) (/9) (/7) (/9), 0. (/7) (/9), 90 (/7) 90 (/9), 780 (8/9) 89 (8/7) RUN OR TAP CODE 7 0. (7/7), 07 (7/9) 7 (7/7) 9 (8/9), (7/9) LENGTH BEFORE COMPRESSION RUN IN (MM) 7. () 8. (7) 0. (09). (). (). (7). () TAP IN (MM). (7).7 (70) 7. (8) 7.7 (97) 8. (0) 8.8 () 9.8 (9) DIE SIZE MINIMUM PRESS SIZE (TONS) CD 0 CD 0AH CD CD AH CD AH CD 8AH 7CD 0AH 9CD AH NOTES: () These tee taps also approved applications on AAAC and ACAR conductors within the diameter ranges listed. () Standard Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown. () Install with Fargo type UJC or, for lowest resistance connection, type HTJC inhibitor compound. 9CD NET WEIGHT LB (KG).0 (.09).00 (.).80 (.7).70 (.).0 (.).0 (.8) 8.90 (.0)

37 ORT SUBSTATION TEES TEE-TAPS COMPRESSION CABLE TO PAD-OPEN RUN AAC, ACAR AND ACSR CONDUCTOR Aluminum compression tee connectors are designed for corona free service at 00 KV. Single cable diameter under.7 inch for KV and.0 inch diameter for 00 KV may not be corona free unless conductors are bundled. Hardware shields and hardware must be ordered separately. Contact sealant is recommended. Tapers and pad are coated with protective strippable plastic. Pad holes have NEMA spacing. Seamless Extruded Aluminum Alloy Tube Pad Pure Cast Aluminum Add suffix: -HS for one hardware shield, and -HS for two hardware shields. ORT ORTD ORT ORTD ORT ORTD ORT ORTD ORT ORTD ORT7 ORT9 O.D. (IN.).0 -. (. -8.7).0 -. (9.0 -.). -.0 (. -.8). -. (.9-8.). -.0 (. - 8.). -. ( ) (. -.8) kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR RANGE () AAC SIZE KCMIL 79, 800, 87., 900, 9 ACSR SIZE KCMIL (STR) 7. (/7) (/7) (0/9), 79 (/7) (/7) (/7) (/7), 79 (/), 900 (/7) PAD DETAILS BOLT HOLES WIDTH IN (MM) LENGTH BEFORE COMPR. IN (MM) DIE SIZE () NOTES: () These tee taps are also approved application on AAAC and ACAR conductors within the diameter ranges listed. () Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown. () Install with Fargo type UJC or, for lowest resistance connection, type HTJC inhibitor compound..0 (7).0 (0) 7. (9) 8. () 000, (0/9).0 8. CD or (7) (70) 0AH 900 (/7) 9 (/7) (/7), , 0. (/) (/7) (0) (9) CD 9., 00 0, 7, 00., 00, , 00, , 800, , 0, 00 9 (0/9), 0. (/7), (/7) (/9), 9. (/7) 9. (/9), 7 (/7) (/9),. (/7) (/9) (/7) (/9), 0. (/7) (/9), 90 (/7) 90 (/9), 780 (8/9), 89 (8/7) 0. (7/7), 07 (7/9) 7 (7/7).0 (7).0 (0).0 (7).0 (0).0 (7).0 (0).0 (0) 9.8 (0) 0.8 (8) 0.7 ().7 (). (9).9 (7). (97) MINIMUM PRESS (TONS) CD 0 CD or AH CD or AH CD or 8AH 7CD or 0AH.0. (8/9), (7/9) (0) () 9CD CD or AH 00 NET WEIGHT LB (KG). (.). (.0). (.7).8 (.). (.00).8 (.09). (.0).7 (.8). (.). (.7) 7.8 (.0) 0. (.)

38 SUBSTATION TEES TEES WELDMENT TUBE TO TUBE WTT Aluminum alloy straight weldment tee for connecting aluminum tubing main to aluminum tubing tap. Casting -T aluminum alloy kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE TUBING MAIN IPS/EHIPS WTT00 WTT0 - WTT - - WTT00 WTT0 - WTT00 WTT0 - WTT - - WTT - - WTT00 WTT0 - WTT00 WTT00 WTT00 WTT0 - WTT00 WTT0 - WTT00 Continued on the next page DIMENSIONS INCHES (MM) TUBING TAP IPS/EHIPS L C A -/ (9.) (0.) (0.) (0.) -/8 (.) (7.0) (0.) -/8 (.) - (.88) (0.) -/8 (.) -7/8 (9.) -/8 (.8) (0.) -/8 (.) - (.88) - (.88) -/8 (.8) -7/8 (7.0) -9/ (9.8) -/8 (8.7) (0.) -/ (07.9) (0.) -/ (07.9) - (.) -/ (07.9) -/ (0.) -/ (0.) -/ (.) -/ (0.) -/8 (.) -/ (0.) -7/8 (9.) -7/8 (9.) -/ (.0) -/ (.7) -/ (.) - (8.) -/ (.) (0.8) -/ (.) -/ (.) (0.8) -/ (.) (0.8) (0.8) - (.) (0.8) (0.8) - (8.) - (.) - (.) - (.).98 (). (.). (.). (.7).7 (.77). (.0). (.9).0 (.9).9 (.77).9 (.8).9 (.8).0 (.9). (.9). (.09). (.9) 8 (.7).9 (.77).0 (.7)

39 SUBSTATION TEES TEES WELDMENT TUBE TO TUBE (CONTINUED) CONDUCTOR SIZE TUBING MAIN IPS/EHIPS kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS INCHES (MM) TUBING TAP IPS/EHIPS L C A WTT00 7-/ -/. WTT /8.8 WTT00 -/8 -/8 -. WTT /8 -.8

40 SUBSTATION TEES TEES WELDMENT TUBE TO TUBE WTT Aluminum alloy angle weldment tee for connecting aluminum tubing main to aluminum tubing tap at degrees. Casting -T aluminum alloy CONDUCTOR SIZE TUBING MAIN IPS/EHIPS WTT00 WTT0 - WTT - - WTT00 WTT0 - WTT00 WTT0 - WTT - - WTT - - WTT00 WTT0 - WTT00 WTT00 WTT00 WTT0 - WTT00 WTT00 WTT00 kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS INCHES (MM) TUBING TAP IPS/EHIPS L C A (0.) (0.) - (7.8) (0.) -/8 (.) -/8 (0.8) (0.) -/8 (.) (.) (0.) -/8 (.) -/8 (0.8) -/8 (.8) (0.) -/8 (.) -/8 (0.8) -/8 (0.8) -/8 (.8) -/ (87.) (0.) -/ (09.) -7/8 (98.) -/ (9.0) -/ (9.0) -/8 (0.78) - (.) -/8 (0.8) -/8 (.) -/ (0.) (7.0) -7/ (8.) -/ (.0) -/8 (.) -/ (.) 7 (77.8) - (8.8) -/ (.7) -/ (.) (0.8) -/ (.7) (0.8) -/ (.) -/ (.7) - (8.) (0.8) -/ (.7) - (8.) -/ (.) (0.8) (0.8) - (8.) - (.) - (.) (0.8).97 (). (.). (.0). (.9). (.0). (.09). (.9). (.7).8 (.7). (.). (.7). (.). (.8).0 (.9).8 (.8). (.9). (.0). (.0) 7

41 WTT SUBSTATION TEES TEES WELDMENT TUBE TO TWO TUBE Aluminum alloy angle weldment tee for connecting aluminum tubing main to two aluminum tubing taps at degrees. Casting -T aluminum alloy 8 CONDUCTOR SIZE TUBING MAIN IPS/EHIPS WTT00 WTT0 - WTT - - WTT00 WTT0 - WTT00 WTT0 - WTT - - WTT - - WTT00 WTT0 - WTT00 WTT00 WTT00 WTT0 - WTT00 WTT00 WTT00 kv AND 00 kv LINE-TO-LINE APPLICATIONS DIMENSIONS INCHES (MM) TUBING TAP IPS/EHIPS L C D A (0.) (0.) - (.) (0.) -/8 (.) - (9.7) (0.) -/8 (.) (.) -/8 (.) -/8 (.) -/8 (0.8) -7/ (8.) -/8 (0.8) -/8 (.) -/8 (0.8) -/8 (0.8) -/8 (.8) 7-/ (8.7) 7-/ (9.8) 8-7/8 (.) 7-/ (9.8) 8-/ (7.0) 0 (.0) 7-/ (9.8) 9-/ (9.8) -/ (9.8) 8 (0.) 8-/ (7.0) -/ (8.7) -/8 (8.8) 8-/ (0.79) 8-7/8 (.) 0-/ (77.8) 0-/ (77.8) -/ (.) -/8 (.) -/ (09.) -/ (.7) -7/8 (98.) -7/8 (.8) -/ (8.7) - (9.08) -/ (0.) 7 (77.8) -/8 (8.7) -/8 (.) -/ (.) -/ (8.7) -/8 (79.8) -/ (9.) -/ (.9) -/ (0.) -9/ (.9) - (8.) -/ (.) (0.8) -/ (.) (0.8) -/ (.) -/ (.) (0.8) - (.) (0.8) (0.8) (7.) -/8 (0.) -/ (.) (0.8) - (.) - (.) - (.). (.9). (.0). (.). (.8).0 (.).0 (.7). (.8). (.99). (.99). (.).9 (.77).9 (.).8 (.). (.). (.09). (.99). (.8) 9.0 (.08)

42 SUBSTATION TEES WELDED TEE CONNECTOR TUBE TO FLAT PAD TYPE WTTFR WTTFR Aluminum alloy weldment, range taking tee for connecting aluminum tubing main to flat. Tongue holes have NEMA spacing. Contact surfaces are finished on both sides of tongue. The saddle configuration provides a weld area equivalent to 0% of the cross-sectional area of the tongue. This design is for corona free service when bolt shields are installed. Catalog number does not include hardware shields or mounting hardware. Refer to type EVHS-D for bolt shields. Contact sealant is recommended for pads after welding. Casting -T aluminum alloy Note: To obtain 90 transverse type, add -90 to catalog number; example: WTTFR-0-0-D-90 kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR RANGE IPS/EHIPS DIMENSIONS INCHES (MM) B T LBS. WTTFR0D thru WTTFR00D thru /8 (0.78) /8 (0.78) / (9.0). (.). (.7) 9

43 EVWTF SUBSTATION TEES WELDED TEE CONNECTORS TUBE TO FLAT SELF SHIELDING TYPE EVWTF Aluminum alloy weldment, range taking tee for connecting aluminum tubing main to flat. Tongue holes have NEMA spacing. Contact surfaces are finished on both sides of tongue. This design is for corona free service at 00 KV with or without taps attached. No bolt shields are required due to built-in recesses. Maximum terminal pad thickness is one () inch. Contact sealant is recommended after welding. Casting -T aluminum alloy Pad 0-T aluminum alloy 0 kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR RANGE IPS/EHIPS EVWTF0D thru. (.7)

44 SUBSTATION TEES WELDED TRIFURCATING TEE CONNECTORS TUBE TO THREE FLAT PADS TYPE EVTTF Aluminum alloy tubing to pads tee connectors are designed for corona free service at 00 KV. Bolt shields are not required due to recessed pads. Mounting hardware must be ordered separately. See compression terminal Type CCL- for tapping off the EVTTF pad. Maximum terminal pad thickness is one ( ) inch. Contact sealant is recommended for contact pad after welding. Bolt shields not required on recessed pad connections. EVTTF Castings -T aluminum alloy Pads 0-T aluminum alloy FACTORY WELD kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS/EHIPS EVTTF DIMENSION C / (7.) EVTTF0 / (7.). (9.7) EVTTF 7 (90.0) EVTTF0 77/ (88.9). (0.) EVTTF0 8/ (0.79). (0.) EVTTF0 89/ (7.9). (0.)

45 EVTS SUBSTATION BUS SUPPORTS BOLTED BUS SUPPORTS TYPE EVTS Aluminum alloy, bolted, rigid or slip fit, tubular bus supports are designed for corona free service at 00KV. The cap members can be rotated to provide rigid or slip-free clamping. One static eliminator spring is furnished in each cap. Casting -T aluminum alloy Springs stainless steel Clamping Hardware aluminum alloy Mounting Hardware galvanized steel kv AND 00 kv LINE-TO-LINE APPLICATIONS CONDUCTOR SIZE IPS/EHIPS BOLT CIRCLE DIA. IN. DIMENSIONS INCHES (MM) L C W J K LBS. (KG) EVTS0 (0.80) (9.08) 7/ (8.) / X 7/8 (7. X.) 7.8 (.) EVTS (0.80) 7/ (9.8) / X 7/8 (7. X.) 8. (.90) EVTS0 EVTS0 EVTS0 (0.80) (0.80) (0.80) (.0) 7/8 (.8) /8 (.) 8 (.90) 9 (.0) 0/8 (.) / X 7/8 (7. X.) / X 7/8 (7. X.) / X 7/8 (7. X.) 9.9 (.9) 0. (.).9 (.0) EVTS07 7 (.0) (9.08) 7/ (8.) / (9.0) / X (0. X.0) 8.9 (.0) EVTS7 7 (.0) 7/ (9.8) / (9.0) / X (0. X.0) 9. (.7) EVTS07 7 (.0) (.0) 8 (.90) / (9.0) / X (0. X.0) 0.0 (.) EVTS07 7 (.0) 7/8 (.8) 9 (.0) / (9.0) / X (0. X.0) 0. (.7) EVTS07 7 (.0) /8 (.) 0/8 (.) / (9.0) / X (0. X.0) 0.8 (.90)