SET-TRU Scroll Chucks
|
|
- Polly Garrison
- 7 years ago
- Views:
Transcription
1 SET-TRU Scroll s SET-TRU SCROLL CHUCKS 2, 3, 4, and 6-Jaw SET-TRU Scroll s, " T.I.R. Toolmex SET-TRU Scroll s can be used for all machining operations where universal chucks are used, along with applications where universal scroll chucks require tighter tolerances Outstanding accuracy, versatility and long life make Toolmex SET-TRU chucks invaluable in the modern workshop and indispensable in the toolroom Features of 6-Jaw SET-TRU s: The 6 jaws grip firmly with less pressure and less distortion per jaw Ideal for thin wall and second operation work Eliminates the need for spring collets SET-TRU Features and Benefits: Fine adjustment Available with forged steel body or semi-steel body 3 pinion design 4 micro adjustment screws provide.0004" T.I.R. repeatability 16", 20" and 25" diameter chucks with 3 jaws and 6 jaws use 8 micro adjustment screws achieving extremely high gripping concentricity Two piece top and master jaws are American Standard tongue and groove 4" diameter chuck has 2 sets of solid jaws Scrolls are forged and fully hardened with thread flanks ground on both sides, then precisely balanced for longer life and higher accuracy Each scroll is precisely balanced Jaw teeth and guides on both sides are fully hardened and ground. Hardened and ground bushings are pressed into the pinion seats. Pinions in 3 pinion models are hardened and ground Each chuck is balanced within fine limits (see page 26 of technical reference pages for more information) Steel mounting plates are interchangeable with Toolmex SET-TRU chucks of the same size so that one chuck can be used on different spindles The life of your Toolmex chuck can be extended significantly through proper maintenance and must be cleaned on a regular basis as recommended For the best gripping results, use the Toolmex recommended chuck grease: Outstanding Accuracy and Quality Hardened and Ground Surfaces Steel Backplate Front View Back View See pages for more information 28 SET-TRU CHUCKS Toolmex Customer Service
2 SET-TRU Scroll s BISON 2, 3, 4, and 6-Jaw SET-TRU Scroll s, " T.I.R. 1. Body 2. Back Cover 3. Scroll Plate Pinion Pinion Half Ring Pinion Sleeve Hard Master Jaws Hard Top Jaws Grease Nipple 10, 11 and 13. Back Cover Mounting Bolts 12. Spindle Locating Pin - A Mount Only 14. Spring Loaded Wrench and 16. Hard Top Jaw Mounting Bolts Mounting Bolts and 20. Hex Keys Fine Adjustment Screw SET-TRU SCROLL CHUCKS meters: 4" thru 12-1/2" meters: 15-3/4", 20", and 25" D F E A1 A Hole d (max) H 2-Piece Jaws Solid Jaws h Soft Top Jaws** 4" " /4" " " /2" /4" " " ** For 2-jaw chucks only C Mounting Bolts M and T Thread M8 x 1.25 M8 x 1.25 M10 x 1.5 M10 x 1.5 M12 x 1.75 M16 x 2 5/8 x 11 3/4 x 10 3/4 x 10 Qty 3 6 Fine Adjustment Screws N Thread M10 x 1 M12 x 1* M12 x 1 M18 x 1 Qty See pages for clamping ranges 4 8 Quality Products nership Industry Experts SET-TRU CHUCKS 29
3 SET-TRU Scroll s SET-TRU SCROLL CHUCKS 2, 3, 4, and 6-Jaw SET-TRU Scroll s, " T.I.R. Backplate Boss Counterbore Backplate and Mounting Principles for 4" through 12-1/2" meter s The backplate s outside diameter, d, is the same as the chuck s outside diameter, D The clearance range between the chuck counterbore and backplate boss OD is from " to " Backplate Boss Counterbore Backplate and Mounting Principles for 15-3/4" through 25" meter s The backplate s outside diameter, d, is the same as chuck s counterbore diameter, D The clearance range between the chuck counterbore and backplate OD is from " to " 3-Jaw T-slot Dimensions for 20" and 25" meter s Only A B (HB) C E T-slot Length 20" " Face of the chuck 30 SET-TRU CHUCKS Toolmex Customer Service
4 SET-TRU Scroll s 2 and 3-Jaw SET-TRU Scroll s, " T.I.R. with Fine Adjustment, Forged Steel Body BISON 2-Jaw Scroll s with Soft Top Reversible Jaws Forged Steel Body 2 Pinion Design Each chuck is provided with: 1 Set of hard master jaws 1 Set of soft top reversible jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 2 Hex keys Type 3165 Hole RPM max 8" " SET-TRU SCROLL CHUCKS BISON 3-Jaw Scroll s with Two-Piece Hard Reversible Jaws Forged Steel Body 3 Pinion Design Each chuck is provided with: 1 Set of hard master jaws 1 Set of hard top reversible jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 2 Hex keys Eye bolts for chuck sizes 15-3/4 and larger Type 3565 Hole RPM max 5" /4" " " /2" /4" " " BISON 3-Jaw Scroll s with Hard Solid Jaws Forged Steel Body 3 Pinion Design Each chuck is provided with: 1 Set of hard solid ID jaws 1 Set of hard solid OD jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 1 hex key Type 3564 Hole RPM max 4" " /4" " " /2" Quality Products nership Industry Experts SET-TRU CHUCKS 31
5 SET-TRU Scroll s SET-TRU SCROLL CHUCKS Precision Accuracy SET-TRU 0.01mm/0.0005" T.I.R. 3-Jaw Scroll s 2-Piece Hard Reversible Jaws Semi-steel body 3 pinion design, hardened and ground Each chuck is provided with: 1 Set of hard master jaws 1 Set of hard top reversible jaws 1 Self-ejecting chuck wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 2 Hex keys D RPM Mounting Fine F E Hole d H h C max Bolts M Adjustment Screws N inch mm 3-Jaw 3-Jaw 6-Jaw Thread Qty Thread Qty 6-1/4" Z M10x1.5 3 M18x1 4 8" Z M10x1.5 3 M18x Z M12x M18x /2" Z M16x2 3 M18x /4" Z /8"-11 6 M18x1 8 For best gripping results, use the TMX recommended chuck grease: See page 23 for clamping ranges 32 SET-TRU CHUCKS Toolmex Customer Service
6 SET-TRU Scroll s 4 and 6-Jaw SET-TRU Scroll s, " T.I.R. with Fine Adjustment, Forged Steel Body, 2 and 3 Pinion Design BISON 4-Jaw Scroll s with Two-Piece Hard Reversible Jaws Each chuck is provided with: 1 Set of hard master jaws 1 Set of hard top reversible jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 2 Hex keys Type 3765 Hole RPM max 6-1/4" " " /2" SET-TRU SCROLL CHUCKS BISON 6-Jaw Scroll s with Two-Piece Hard Reversible Jaws Each chuck is provided with: 1 Set of hard master jaws 1 Set of hard top reversible jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 2 Hex keys Eye bolts (16 to 25 only) Type 3865 Hole RPM max 5" /4" " " /2" /4" " " BISON 6-Jaw Scroll s with Hard Solid Jaws Each chuck is provided with: 1 Set of hard solid ID jaws 1 Set of hard solid OD jaws 1 wrench 1 Set of mounting bolts 1 Set of fine adjustment screws 1 hex key Type 3864 Hole RPM max 4" " /4" " " /2" Quality Products nership Industry Experts SET-TRU CHUCKS 33
7 SET-TRU Scroll s SET-TRU BACKPLATES BISON Fully Machined Type A Steel Backplates for SET-TRU s Designed to Mount on A1 and A2 American Standard Spindles G. Type A Type 8215 meters: 5" to 12-1/2" meters: 15-3/4" to 25" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" Taper A A D E F C H Mounting Holes G K B1 B Spindle Mounting Bolts N A M8 x / / A / A / M10 x A / A / M10 x A / A A M12 x / / A / A A M16 x / / A / A / A / / A / A / A / / A / A / A / / A / A No. of Bolts SET-TRU CHUCKS Toolmex Customer Service
8 SET-TRU Scroll s Fully Machined Type A Steel Backplates for Precision Accuracy SET-TRU s Designed to mount on A1 and A2 American Standard spindles Spindle Nose G SET-TRU BACKPLATES Type A Taper A D E F C H Mounting Holes G K B1 B Spindle Mounting Bolts N 6-1/4" A M10x /16" " A /16" M10x A /2" " A /16" M12x A /2" /2" A /2" M16x A /8" Bolts Qty Quality Products nership Industry Experts SET-TRU CHUCKS 35
9 SET-TRU Scroll s SET-TRU BACKPLATES BISON Fully Machined Type D Steel Backplates for SET-TRU s Type D1 American Standard Camlock Spindles Type D Type 8245 meters: 4" to 12-1/2" meters: 15-3/4" to 25" 4" 5" 6-1/4" 8" 10" 12-1/2" 15-3/4" 20" 25" Taper Qty Studs A F D E C H Mounting Holes G D /16" M8 x D /8" D /16" D /4" M8 x B1 B D /8" D /8" D " D /16" D /8" D /4" M10 x D /8" D D /16" D /8" D /4" M10 x D /8" D " D /8" D /4" M12 x D /8" D " D /8" D " M16 x D /16" D /8" D " / D /16" D " D /16" / D /8" D " / D /16" SET-TRU CHUCKS Toolmex Customer Service
10 SET-TRU Scroll s Type D Fully Machined Type D1 Steel Backplates for Precision Accuracy SET-TRU s Type D1 American Standard camlock spindles Spindle Nose SET-TRU BACKPLATES 5" 6-1/4" 8" 10" 12-1/4" Taper Stud No. of Studs A F D E C H Mounting Holes G D1-4 5/ M8x D1-6 7/ D1-3 9/ M10x D1-4 5/ D1-4 5/ D1-5 3/ M10x D1-6 7/ D1-6 7/ M12x D D1-6 7/ M16x D B1 B Quality Products nership Industry Experts SET-TRU CHUCKS 37
11 SET-TRU Scroll s SET-TRU BACKPLATES BISON Fully Machined Threaded Steel Backplates for SET-TRU s Threaded D 4" 5" 6-1/4" 8" Type 8285 Thread d G E F L C K M UNS-2B M8 x /2-8 UN-2B /8-12W /2-8 UN-2B M8 x /16-10 Hardinge /4-8 UN-2B /2-8 UN-2B /16-10 Hardinge M10 x /4-8 UN-2B /2-8 UN-2B /4-8 UN-2B M10 x /8-6 UN-2B " /8-6 UN-2B M12 x /2" /8-6 UN-2B M16 x No. of Bolts SET-TRU CHUCKS Toolmex Customer Service
12 SET-TRU Scroll s BISON Fully Machined Type C Steel Backplates for SET-TRU s DIN SET-TRU BACKPLATES Type C Type 8235 meters: 5" to 12-1/2" meters: 15-3/4" to 25" Taper A D E C H F B1 B G 6-1/4" C M10 x " C M10 x " C M12 x /2" 15-3/4" 20" C M16 x C C / C C / C " C / No. of Studs Quality Products nership Industry Experts SET-TRU CHUCKS 39
13 SET-TRU Scroll s SET-TRU BACKPLATES BISON Fully Machined Type L Steel Backplates for SET-TRU s Type L Type 8255 meters: 5" thru 12-1/2" meters: 15-3/4" thru 25" Taper D Thread T - UNS3 G d E F M J C L 5" L / M10 x /4" 8" 10" 12-1/2" 15-3/4" L00 3-3/ M10 x L0 4-1/ L00 3-3/ L / M10 x L L00 3-3/ L / M12 x L L0 4-1/ L M16 x L2 7-3/ L L / / L3 10-3/ " L / / SET-TRU CHUCKS Toolmex Customer Service
14 SET-TRU Scroll s BISON Base Plates for Rotary Tables Perfect for all rotary tables with 3/6 and 4/8 T-Slots Designed for use with BISON SET-TRU chucks Base plates are supplied with four mounting bolts with T-nuts and one MT pin See page 187 for more information Type 8298 Base Plate 5" /4" " " /2" /4" " MT Pin MT BISON Base Plates for Milling Machine Tables Perfect for all milling machine tables Designed for use with BISON SET-TRU chucks See page 187 for more information Back View Type 9452 Base Plate 6-1/4" " " /2" SET-TRU CHUCK BACKPLATES AND BASE PLATES BISON Fully Machined 5C Steel Back Plates for 3 and 6-Jaw SET-TRU s Backplates and SET-TRU chucks are sold separately Type C Backplate 3-Jaw s 6-Jaw s OAL Body Height** Clamping Range Min-Max 4" * * " /4" * 4" solid jaws only ** dimensions can be found on page 29 Quality Products nership Industry Experts SET-TRU CHUCKS 41
15 SET-TRU Scroll s SET-TRU SPARE PARTS BISON Hard Master Jaws for 2, 3, 4, and 6-Jaw SET-TRU s American Standard Tongue and Groove Jaws Sold in sets 3 Piece Set 6 Piece Set 2-Jaw 3-Jaw 4-Jaw 6-Jaw 5" /4" " " /2" /4" " " All solid jaws and master jaws are manufactured to Bison s rigid specifications 5" to 10" meters 12" and 16" meters 20" meter 25" to 32" meters K H G F J S L D E B OAL Thread 2-Jaw 3-Jaw 4-Jaw 6-Jaw inches A M of Set 5" 5/8 57/ / /4" 3/4 1-1/ / /8-16 8" 7/8 1-3/ " 1-1/16 1-9/ / /2" 1-1/4 1-7/ /4" / / " 1-1/2 2-1/ / " Hard Master Jaws American Standard tongue and groove jaws Sold in 3 piece sets K H G F J L D E B A S Thread M C /4" /8"-16 8" " /2" /2" SET-TRU CHUCKS Toolmex Customer Service
16 SET-TRU Scroll s BISON Hard Top Jaws for 2, 3, 4, and 6-Jaw s American Standard Tongue and Groove Jaws Sold in sets 3-Jaw 3-Jaw Enhanced Serration 4-Jaw 6-Jaw 5" /4" " " /2" /4" " " Piece Set 6 Piece Set Jaw mounting bolts can be found on page 48 SET-TRU SPARE PARTS M H G J K D E F N C B OAL A O P 3-Jaw 4-Jaw 6-Jaw of Set 5" 5/8 57/ /4" 3/4 1-1/ " 7/8 1-3/ " 1-1/16 1-9/ /2" 1-1/4 1-7/ /4" " 1-1/2 2-1/ " Hard Top Jaws for 3-Jaw Scroll s American Standard tongue and groove jaws Sold in 3 piece sets TMX hard top jaws are interchangeable with Bison hard top jaws M H G J K L D E F N1 N2 C B A O P /4" " " /2" /4" Quality Products nership Industry Experts SET-TRU CHUCKS 43
17 SET-TRU Scroll s SET-TRU SPARE PARTS BISON ID Hard Solid Jaws for 3, 4, and 6-Jaw s Sold in sets 3-Jaw 4-Jaw 6-Jaw C L B F E N P O of Set - inches 3-Jaw 4-Jaw 6-Jaw 4" " /4" " " /2" Sold in 3 piece sets ID Hard Solid Jaws for 3-Jaw s ID Jaws L B H h 6-1/4" " " /2" /4" SET-TRU CHUCKS Toolmex Customer Service
18 SET-TRU Scroll s BISON OD Hard Solid Jaws for 3, 4, and 6-Jaw s Sold in sets 3-Jaw 4-Jaw 6-Jaw C L B F E N P O of Set - inches 3-Jaw 4-Jaw 6-Jaw 4" " /4" " " /2" SET-TRU SPARE PARTS Sold in 3 piece sets OD Hard Solid Jaws for 3-Jaw s OD Jaws L B H h 6-1/4" " " /2" /4" Quality Products nership Industry Experts SET-TRU CHUCKS 45
19 SET-TRU Scroll s SET-TRU SPARE PARTS BISON Soft Top Jaws for 2, 3, 4, and 6-Jaw s American Standard Tongue and Groove Jaws Sold by piece 2-Jaw 3 and 4-Jaw 6-Jaw 5" " " " " " " " For 2, 3 and 4-Jaw s For 6-Jaw s A B 3, 4, and 6-Jaw B 2-Jaw 5" C D E F G H I J K /4 Bolt M 2-Jaw per Pc 3, 4, and 6-Jaw per Pc 6-1/4" / /8-16 8" / / " / / /2" / /4" / " / " BISON Soft Solid Jaws for 3 and 4-Jaw s Sold in sets 3-Jaw 4-Jaw C L B F E of Set - inches 3-Jaw 4-Jaw 4" " /4" " " /2" SET-TRU CHUCKS Toolmex Customer Service
20 SET-TRU Scroll s BISON Spare s for 2, 3, 4, and 6-Jaw s with Forged Steel Body Scroll D H 4" " " " " " " " " Pinion D H * Pinion retaining screw ** Wrenches are spring loaded for the operator s safety Removal of the spring is not recommended and may void chuck warranty Wrench** Square Pinion Sleeve ID Half Ring D * D = Outer meter H = Height L = OAL SET-TRU SPARE PARTS Sold by the piece OD = outside diameter L = overall length Spare s for 3-Jaw s with Semi-steel Body Scroll OD 6-1/4" " " /2" Pinion OD L Wrench Square Pinion Screw OD L Quality Products nership Industry Experts SET-TRU CHUCKS 47
21 SET-TRU Scroll s SET-TRU SPARE PARTS BISON Fine Adjustment Screws Sold by piece Screw Screw mm L No. of Screws * M10 x 1 4" M12 x 1 5" " " " " M18 x " " " * For 6-jaw chucks only 4 8 Hex Key BISON Mounting Bolts for Hard and Soft Top Jaws Sold by piece L Thread Screw No.1 Short Screw 5" 5/ /4" 8" 10" 12-1/2" 3/ L.75 1/ /4" 5/ " 25" 3/ Screw No.2 Long Screw L Step Jaws Soft Jaws 48 SET-TRU CHUCKS Toolmex Customer Service
22 SET-TRU Scroll s BISON Camlock Studs and Set Screws Sold by piece Taper Camlock Studs meter Thread D /16" D /8" M10 x 1 D /4" M12 x 1 D /8" M16 x 1.5 D " M20 x 1.5 D /16" M22 x 1.5 D /8" M24 x 1.5 Set Screw No. of Studs 3 6 SET-TRU SPARE PARTS BISON Mounting Bolts Sold by piece Bolt 4" and 5" M8 x " M10 x 1.5 8" " M12 x " M16 x " /8 x " /4 x 10 25" L No. of Bolts 3 6 L BISON Type C, DIN Studs Sold by piece Taper Stud inch Stud mm Thread mm No. of Studs C M C M10-43 C M C M16-60 C M Quality Products nership Industry Experts SET-TRU CHUCKS 49
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationMaking Soft Jaws for a Bison 3 Jaw Lathe Chuck
Making Soft Jaws for a Bison 3 Jaw Lathe Chuck By R. G. Sparber Copyleft protects this document. 1 My Bison lathe chuck has served me well for many years. One of its features is the ability to remove the
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationMETAL-TURNING LATHE Built from Stock Parts
by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order
More informationSENTINEL SERIES MICRO-MATIC STUD DRIVER WITH TORQUE CONTROL
SERIES MICRO-MATIC STUD DRIVER WITH TORQUE CONTROL 1. Drives studs to pre-determined torque. 2. Prevents stud or part damage when driving to shoulder or bottom of hole. 3. Quick releasing, non-reversing
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationKOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.
KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.
More informationFAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
More informationHEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationMSA Saddle Machine Parts & Operating Manual
Machine Model Serial# Register product online @ www.mathey.com PO Box 472110 Tulsa, OK 74147 USA Toll Free: 800-725-7311 918-447-1288 office 918-447-0188 fax www.mathey.com MSA
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationUltra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationCommon Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More informationDRIVE AND DRIVEN PULLEY
11 DRIVE AND DRIVEN PULLEY SCHEMATIC DRAWING ------------------------------------------------- 11-1 SERVICE INFORMATION------------------------------------------------ 11-2 TROUBLESHOOTING-----------------------------------------------------
More informationPRODUCT MANUAL - M090
PRODUCT MANUAL - M090 MODEL 203/266 ELECTRIC CAN OPENER 1 SAFETY CAUTION: SEVERED CAN LIDS HAVE CUTTING EDGES. USE OF A PROTECTIVE GLOVE OR TONGS IS ADVISED WHEN HANDLING LIDS. WARNING To avoid risk of
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationParts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)
Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationBPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES
BPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES TABLE OF CONTENTS 1992 CONTENTS PAGE BPW Air Suspension Series 3 Hangers 4 Trailing Arms and Attachments
More informationOWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationProfessional HEX Tools Inch & Metric
Complete Hex Program Professional HEX Tools Inch & Metric 2 Toll Free: (800) 494-6104 Wiha Hex Tools Index DESCRIPTION Page T-handles 8 PocketStar Fold Outs 16 L-keys - Long/Short 17-20 Nickel & Black
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationPhone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationSpecifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)
Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationBRAKE DRUM AND ROTOR SERVICE INFORMATION
SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper
More informationEEC 94/20/EC APPROVED KINGPINS
EEC 94/20/EC APPROVED KINGPINS All Capus EEC approved Kingpin Assemblies have been tested in Germany by RWTuV. The tests include a simulated life test - 2 million cycles at the approved 'D' value loadings.
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationMUSTANG II IFS COMPLETE PARTS PACKAGE
MUSTANG II IFS COMPLETE PARTS PACKAGE Your Southern Rods & Parts Mustang II IFS Parts Package contains the following items: 1 pr) Upper Control Arms (2023) 1) Upper Arm Bolt Kit (MP-001-A) 1 pr) Lower
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationModule 5 Couplings. Version 2 ME, IIT Kharagpur
Module 5 Couplings Lesson 1 Introduction, types and uses Instructional Objectives At the end of this lesson, the students should have the knowledge of The function of couplings in machinery. Different
More informationBICO CHIPMUNK JAW CRUSHER - TYPE WD
BICO CHIPMUNK JAW CRUSHER - TYPE WD The Bico Chipmunk Jaw Crusher is designed to give long and efficient service. In order to secure the long life and excellent performance that your crusher is capable
More informationK-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power
More information2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)
2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,
More informationThe "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans
More informationCeta Form Bits & Accessories
Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationPROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
More information3097 en - 2013.06 / e. This manual is to be given to the end user POULIBLOC 2000-3000. Shaft mount reducer. Installation
097 en - 0.06 / e 8 en This manual is to be given to the end user POULIBLOC 000-000 Installation LEOY-SOME ISTALLATIO POULIBLOC 000-000 097 en - 0.06 / e This document complements the general instructions
More informationHOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationResharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
More informationOWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationEngine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
More information