2.4. Order table door handles with short backplate. Order code Round backplate Oval backplate Rectangular backplate AL AL

Transcription

1 2.4. Order table door handles with short backplate Type of grip Order code Round backplate Oval backplate Rectangular backplate AL AL AL When ordering please indicate quantity of left hand and right hand turn handles. Order codes with AL, example 1805AL: type in aluminium (painted or anodised) Order table square spindles Type of grip Section depth Spindle length Order code Notes: 1) All sizes only apply if both the interior and the exterior handle is mounted mm mm mm mm 70- mm mm -110 mm mm V48- V48- V48- V48- V48- V48- V48- V48-2) The spindle length when using rolling shutter handle n 1843, can be calculated with the following formula: L = P + 30 ±2mm with: - L = spindle length - P = section depth 3) The square spindles are fixed by a grub screw in the slotted part of the spindle. At least 1 screw must engage in the slot of the square spindle when there s a door handle at both sides. See note 2 V48- V48- V48- V48- V48- V48- V48- V48-4) The square spindles are also available in large scalement package (G) per 50 pieces. Ordering example: GV48-. k

2 2.6. Escutcheons The escutcheons are used in combination with the door handles with short backplate. Finish and properties same as the door handles. The escutcheons are also available without cylinder hole (C). When ordering please add a C at the order code. AL = escutcheon in aluminium, coated or anodised. n 1820 n 1820C n 1821 n 1822 n 1823 n 1823C n 1823AL n 1824 n 1824C n 1824AL k

3 2.7. Fixed knob on short backplate n The fixed knob on short backplate n is used in combination with the door handles with short backplate and separate escutcheons. The special spindle of 8 mm is included. The spindle is screwed into the fixed knob and connected to the door handle. The spindle part in the door handle rotates whereas the fixed knob is not moving. The spindle connects the 2 door handles together, in order to get a better positioning and a stronger fixing. Finish and properties same as the door handles. n Order code Spindle length Section depth Not available in spindle length Bathroom knob n 1829 The turn knob is used to operate the doors of sanitary rooms. The turn knob is supplied with a steel zinc plated square spindle of 8 mm and with a red-green indicator. Suitable for section depths from 20 to 45 mm. Finish and properties same as the door handles. k

4 3. Door handles with long backplate Finish and properties same as the door handles with short backplate. The door handles with long backplate have a powerful concealed spring. The door handles are available without cylinder hole (C). When ordering please add a C at the order code. Example n 1845C. The square spindle must be ordered separately, see order table page K When ordering please indicate quantity of left hand and right hand handles Door handles right hand = illustrated left hand = opposite view n 1845(C) n 1846(C) n 1847(C) k

5 70 n 1848(C) n 1849(C) 31 Ø n 1843(C) k

6 3.2. Order table door handles with long backplate Type of grip Order code AL AL AL When ordering please indicate quantity of left hand and right hand turn handles. Order codes with AL, example 1845AL: type in aluminium (painted or anodised) Order table square spindles Type of grip Section depth Spindle length Order code mm mm mm mm 70- mm mm -110 mm mm V48- V48- V48- V48- V48- V48- V48- V48- Notes: see order table square spindles for door handles with short backplate page K See note 2 V48- V48- V48- V48- V48- V48- V48- V Safety screw set n for long backplate The door handles per pair can be fixed with a safety screw set, where both handles are screwed together through the lock. The set contains the following parts: screws M4xL -- 2 sleeve nuts M M4 Order code Screw L Section depth base = 9 mm mm mm mm mm mm L Note: please order 2 screw sets per pair of door handles with long backplate. M4 k