Door Handles Contents

Transcription

1 Door Handles

2

3 Contents Lever handles KILIMANJARO/MONT BLANC Lever handle set - KILIMANJARO Lever handle set - MONT BLANC Individual set components Pull handles FUJI Pull handle set Grip handles MATTERHORN Grip handle set Lever handles HOPPE Lever handles CASSINA Lever and pull handles FSB Lever handle set Lever handle set Lever handle set Pull handle set AH.2

4 Information Classification of lever handles in compliance with EN 906:2002 and EN 906:200 Lever handles are divided into four categories of use in these standards. The requirements are classified using an eight-position designation system. The products are classified in accordance with the 2002 and 200 keys. Deviating definitions can be identified by the issue date. 8-position classification key in accordance with EN 906:2002 and EN 906:200 Position EN 906:2002 Category of use EN 906:200 Category of use 2 Durability 2 Durability 3 Door weight 4 Fire resistance* 4 Fire resistance* 5 Safety 6 Corrosion resistance 7 Forced entry resistance 7 Burglar protection 8 Version * The proven fire resistant characteristics can be found in the relevant report Meaning of individual positions in classification key: Classification key Category of use (2002) Category of use (200) Possible grades Meaning 4 = Moderate usage frequency by persons who are inclined to take the utmost care and are unlikely to use the fittings incorrectly, e.g. interior doors in residential buildings 2 = Moderate usage frequency by persons who are inclined to take (2002: "the utmost") care but may possibly use the fittings incorrectly, e.g. interior doors in office buildings 2 Durability (2002) 2 Durability (200) 3 Door weight No classification 3 = Frequent use by the public or other persons who are not inclined to take care and are extremely likely to use the fittings incorrectly, e.g. doors in office buildings with public access 4 = For use on doors that are frequently subjected to applied force or property damage, e.g. football stadiums, oil rigs, in military bases or public toilets = Moderate usage frequency: 00,000 test cycles 7 = Frequent use: 200,000 test cycles AH.3

5 Information Meaning of individual positions in classification key: Classification key 4 Fire resistance* (2002) Possible grades Meaning 0 0 = Not permitted for use on fire resistant and smoke control doors 4 Fire resistance* (200) = Suitable for use on fire resistant and smoke control doors 0, A C 0 = No classification A = Suitable for use on smoke control doors B = Suitable for use on fire resistant and smoke control doors C = Suitable for use on fire resistant and smoke control doors with lever handle core requirements 5 Safety 0 0 = For normal purposes = In the event of safety applications 6 Corrosion resistance = No defined corrosion resistance (2002), no classification (200) = Low corrosion resistance 2 = Average corrosion resistance (2002), moderate corrosion resistance (200) 3 = High corrosion resistance 4 = Extremely high corrosion resistance 5 = extraordinarily high corrosion resistance (2002), extremely high corrosion resistance (200) 7 Forced entry resistance 7 Burglar protection = Fittings that are not suitable for use on burglar-proof doors (2002), no classification (200) = Low forced entry resistance 2 = Moderate forced entry resistance 3 = High forced entry resistance 4 = Extremely high forced entry resistance 8 Version A, B or U Type A = Spring-assisted fittings * The proven fire resistant characteristics can be found in the relevant report Type B = Fittings with sets with spring tension (2002), spring-assisted fittings (200) Type U = Fittings without sets with spring unsprung fittings (200) AH.4

6 Information Door direction left or right The door direction (left/right) according to DIN 07 is determined as follows: Visible position of the door hinges on the left: (DIN) left Visible position of the door hinges on the right: (DIN) right When selecting alternate sets with asymmetrical handles a distriction to the right/left is required. It is therefore necessary to observe the particular door direction. Examples of asymmetrical lever handles Hinges visible on the left hand side Hinges visible on the right hand side DIN left hand DIN right hand Examples of symmetrical lever handles Lever handle direction Lever handle aperture part pointing to the left Lever handle aperture part pointing to the right Version left hand Version left hand Opening direction DIN left = left outwards DIN right = right outwards DIN left = left inwards DIN right = right inwards AH.5

7 Information Product line StarTec The StarTec door handles are for the first time divided into four clearly separated product lines. The purpose behind this is to enable you, our partners to get the better overview of our product range and to make it easier for you to find the right handles for your needs. KILIMANJARO MONT BLANC FUJI MATTERHORN AH.6

8 Information The KILIMANJARO Lever handles series StarTec How to recognise original StarTec KILIMANJARO door handle sets? 2 The Häfele logo is visible on the lever handle 2 The spindle is marked with Häfele logo and EN906 logo 3 The spindle comes with an offset hollow core for screw fixing 4 The lever handle single spring loaded mechanism ensures a straight lever handle position 5 The lever handle is fixed to a steel rosette 6 The bolt through screw fixing for maximum hold on handle Additional features: Made of stainless steel For door thicknesses of mm KILIMANJARO Certificate of product range AH.7

9 Lever Handles Lever handle sets Stainless steel matt Stainless steel matt Stainless steel polished Stainless steel polished Stainless steel matt Stainless steel polished Stainless steel matt Stainless steel polished AH.8

10 Lever Handles Lever handle sets Stainless steel matt Stainless steel matt Stainless steel polished Stainless steel polished Stainless steel matt Stainless steel polished Stainless steel matt Stainless steel polished AH.9

11 Lever Handles Lever handle sets Stainless steel matt Stainless steel matt Stainless steel polished Stainless steel polished Stainless steel matt Stainless steel polished Stainless steel matt Stainless steel polished AH.0

12 Lever Handles Lever handle sets Stainless steel matt Stainless steel matt Stainless steel polished Stainless steel polished Stainless steel matt Stainless steel polished Stainless steel matt Stainless steel polished AH.

13 Lever Handles Fixed knob Stainless steel matt Stainless steel polished Packing: pc. Accessories for door handle set StarTec Hexagon socket screw M6 Diameter mm Packing: pc. Mounting screw M6 Size mm M4 x Packing: pc. Spindle 8 mm on plate For rose set Spindle arresting plate For backplate set Version For rose set For backplate set Dimension mm 27 x Packing: pc. AH.2

14 Lever Handles Accessories for door handle set StarTec Spindle, square Length L mm Alternate spindle M2, 8 mm Length L mm Spindle 8 mm, split in center Length L mm Alternate spindle 8 mm Adapter sleeve Length X mm Length mm Size mm AH.3

15 Lever Handles The Mont Blanc Lever handles series StarTec How to recognise original StarTec Mont Blanc door handle sets? 2 The Häfele logo is visible on the lever handle 2 Extra long handle length with 40 mm 3 The spindle comes with an offset hollow core for screw fixing 4 The lever handle single spring loaded mechanism ensures a straight lever handle position 5 Rose is separated from the handle to achieve a one piece rose cover 6 The bolt through screw fixing for maximum hold on handle 3 4 Additional features Made of stainless steel (304) For door thicknesses of mm MONT BLANC AH.4

16 Lever Handles Lever handle sets Stainless steel matt (304) Stainless steel matt (304) Stainless steel matt (304) AH.5

17 Lever Handles Lever handle sets Stainless steel matt (304) Stainless steel matt (304) Stainless steel matt (304) Stainless steel matt (304) AH.6

18 Lever Handles Lever handle sets Stainless steel matt (304) Stainless steel matt (304) Stainless steel matt (304) AH.7

19 Lever Handles Individual set components Lever handle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt/polished (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle AH.8

20 Lever Handles Individual set components Lever handle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Stainless steel matt (304) Packing: pair incl. spindle Rose and escutcheon Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair AH.9

21 Lever Handles Individual set components Rose and escutcheon Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pc Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pc Stainless steel matt (304) Packing: pair AH.20

22 Lever Handles Individual set components Rose and escutcheon Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pc Long backplate Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair AH.2

23 Lever Handles Individual set components Long backplate Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair Stainless steel matt (304) Packing: pair AH.22

24 Lever Handles Accessories for lever handle set Spindle, square Length L mm Mounting screw For door thickness mm Screw length mm Hexagon socket screw M6 Diameter mm Packing: pc. AH.23

25 Pull Handles The FUJI Pull handle series StarTec How to recognise original StarTec FUJI door handle sets The Häfele logo is visible on the pull handles 2 Bolt through screw fixing for long period of time 3 Modern design 2 Additional features: Made of stainless steel FUJI AH.24

26 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.25

27 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Ø mm Dim. A mm Dim. B mm Packing: pair incl. fixing material Stainless steel matt Packing: pair incl. fixing material ,200, ,600, ,000, AH.26

28 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Ø mm Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø3 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Stainless steel matt Packing: pair incl. fixing material ,200, ,600, ,000, Packing: pair incl. fixing material AH.27

29 Pull Handles Pull handle sets B For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø3 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material Stainless steel matt ,030, Packing: pair incl. fixing material AH.28

30 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt ,030, Packing: pair incl. fixing material For glass, aluminium or timber door with back to back fixings Screw M8 x 70 mm For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.29

31 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Stainless steel satin , ,200, Packing: pair incl. fixing material Dim. A mm Dim. B mm Stainless steel satin Packing: pair incl. fixing material AH.30

32 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø3 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.3

33 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Stainless steel matt Packing: pair incl. fixing material Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.32

34 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B m For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø3 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material Stainless steel matt Packing: pair incl. fixing material AH.33

35 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material Stainless steel matt Packing: pair incl. fixing material AH.34

36 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.35

37 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Glass cut out for fix bolt Ø4 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 For door thickness: 8 50 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material Stainless steel matt ,025, Packing: pair incl. fixing material AH.36

38 Pull Handles Pull handle sets For glass, aluminium or timber door with back to back fixings Screw M6 For door thickness: 8 50 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm For glass, aluminium or timber door with back to back fixings Screw M8 x 70 mm For door thickness: 8 50 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Stainless steel matt Packing: pair incl. fixing material Packing: pair incl. fixing material AH.37

39 Pull Handles Pull handle sets Single side fixing bolt for pull handle Screw M8 Screw M6 Stainless steel matt Stainless steel polished Packing: pc. (Pull handle use 2 pcs.) For glass, aluminium or timber door with back to back fixings Screw M8 x 70 mm For door thickness: 8 50 mm Set pull handles Set screws for glass door Set screws for wooden door Dim. A mm Dim. B mm Stainless steel matt Packing: pair incl. fixing material AH.38

40 Pull Handles AH.39

41 Grip Handles The MATTERHORN Grip handle series StarTec How to recognise original StarTec MATTERHORN door handle sets The Häfele logo is visible on the cylinder 2 Big oval knob from inside 3 Following american hardware specifications 4 Modern design Additional features: Made of stainless steel (304) For door thicknesses of mm Backset: 60 mm MATTERHORN AH.40

42 Grip Handles Grip handle set For flush timber doors Suitable for DIN left and DIN right hand Technical data For door thickness: Pair of grip handles Set of fixing material Entrance & Dummy Stainless steel matt Stainless steel polished For flush timber doors Suitable for DIN left and DIN right hand Technical data For door thickness Pair of grip handles Set of fixing material Entrance & Dummy Stainless steel matt Stainless steel polished Order reference Cylinder and mortise lock... page.43 AH.4

43 Grip Handles Grip handle set For flush timber doors Suitable for DIN left and DIN right hand Technical data For door thicknesses: Pair of grip handles Set of fixing material Entrance & Dummy Stainless steel matt Stainless steel polished For flush timber doors Suitable for DIN left and DIN right hand Technical data For door thickness Pair of grip handles Set of fixing material Entrance & Dummy Stainless steel matt Stainless steel polished Order reference Cylinder and mortise lock... page.43 AH.42

44 Grip Handles Grip handle set Accessories Mortise lock for grip handle, backset 60 mm Stainless steel matt Stainless steel polished Packing: pc. Cylinder For flush timber doors Suitable for DIN left and DIN right hand Technical data For door thicknesses: Pair of grip handles Set of fixing material Entrance & Dummy Stainless steel matt Stainless steel polished Order reference Cylinder and mortise lock... page.43 Round key 5 Owner key Construction key Stainless steel matt Stainless steel polished Blind rose for dummy function version Blind rose Stainless steel matt Stainless steel polished AH.43

45 Lever Handles - HOPPE Resista - HOPPE's surface guarantee HOPPE Resista hardware has a 0-year surface guarantee (PVD coating). They are therefore ideal for costal areas and highly frequented area such as public buildings, shop and hotels. Care Dirt can be easily removed with a damp cloth. The use of caustic cleansers or chemicals should be avoided. No further special care is needed. SecuSan - HOPPE s antimicrobial surface coating SecuSan is highly effective due to the fast action of its antimicrobial properties. Hardware with this surface is thus especially suitable for use in medical and nursing facilities, e.g. in hospitals, medical centres, pharmacies, care homes, nurseries, schools, institutes or public buildings. Wherever hygiene protection needs to act fast while remaining highly cost-effective and environmentally considerate. It's high level of hygienic safety has been confirmed independent laboratory and practical tests. For more information please check with our sales representative. AH.44

46 Lever Handles - HOPPE HOPPE Quick-Fit connection Quick-fit - Hoppe's spindle fixing method With normal door handle installation, lots of steps have to be taken, quite often not without awkward fumbling. This is tedious and takes time. What is infinitely better is the HOPPE quick-fit connection. With its advanced technology, door handles can be installed in one simple step - and to last! The key point of the new technology is the blocking mechanism, developed by HOPPE, in the receiver handle. This holds the solid spindle of the other handle firmly and without play. It's with the whole width of the spindle that maximum torque transmission is achieved. The HOPPE quick-fit connection is a variable axial handle fitting, tested according to DIN EN 906 and can be used for various door thicknesses (in a defined area). The advantages of the HOPPE quick-fit connection at a glance: Very quick door handle fitting: around 75% time saving compared with normal fitting No Allen screw or transverse spindles needed - No hole for Allen screw needed - No alignment of the spindle necessary when tightening the Allen screw - No loosening of the Allen screw or spindle possible Integrated blocking mechanism in the receiver handle - No tools needed for installation - Play-free handle connection - Long-lasting, firm fitting of the door handles Use of a solid spindle - Solid spindle for maximum torque transmission Variable axial handle fitting tested to DIN EN can be used for various door-thicknesses (in a defined area) Easy and quick removal of door handles - eg, with the Allen key included or a screwdriver AH.45

47 Lever Handles - HOPPE Quick-Fit plus HOPPE s rose fixing method HOPPE Quick-Fit plus is the logical further development of the innovative HOPPE Quick-Fit connection.it is not just the door handles which can be fitted easily without screws and almost no tools, but rose and escutcheon, too. The new quick-fit sets are striking with their almost flat, flush rose design. Modern and appealing design The new quick fit plus sets go very well with the current trends in design. The stainless steel roses, which are only 2mm thick, come in round or square shapes virtually flush with the door. Easy and quick fitting The handle roses with through-going supporting lugs and door handles are simply fitted together, with the whole set able to be installed without the need for screws. The through-going supporting lugs of the handle roses consist of a nylon pin and sleeve each. By plugging one into the other a play-free and firm fixing is produced. AH.46

48 Lever Handles - HOPPE Lever handle sets Aluminium silver coloured Aluminium silver coloured Aluminium stainless steel coloured Aluminium stainless steel coloured Aluminium silver coloured Aluminium stainless steel coloured Aluminium silver coloured Aluminium stainless steel coloured AH.47

49 Lever Handles - HOPPE Lever handle sets Brass polished satin PVD Brass chrome plated polished/matt Brass chrome plated polished satin Brass chrome plated polished satin AH.48

50 Lever Handles - HOPPE Lever handle sets Brass polished Brass polished Brass chrome plated polished satin Brass chrome plated polished satin Brass polished Brass chrome plated polished satin Brass polished Brass chrome plated polished satin AH.49

51 Lever Handles - HOPPE Lever handle sets Brass chrome plated polished/matt Stainless steel matt Stainless steel matt Stainless steel matt AH.50

52 Lever Handles - HOPPE AH.5

53 Lever Handles - CASSINA ENRICO CASSINA - Classic lever handles The Enirico Cassina collection is probably the most complete from the point of view or the classic rigour and was able to grow richer year after year thanks to the continual work of research and selection. The catalogue offers a selection based on the recovery of the different stylistic standards the below are detail of each style. MANNERISM There are several different forms and shapes, ex: faces, fruits, ribbons... the overall appearance is rich, full of details and meaning. Exaggerated faces, monster like faces were very typical of mannerism. The rectangular form of the plate is softened by roundish elements and tiny details. The handgrip has a curvy, spiral form and elements that resemble leaves or fruits. ITALIAN BAROQUE A style combines spectacle, illusion and grandness in an attempt to arouse emotion and wonder. Widespread use of elliptical and spiral shapes, vibrant and fluent stylistic design. The composition still bears a symmetrical and balanced effect. Shells appear frequently in decorations as they recall the mythologica Gods of The handle has a curviliner movement and the sea. design that evolves along the handgrip. LOUISXV The peak of Rococo style, exhibiting creativity and an ornamental exuberance that amplifies and remodels baroque tradition. The lines are often asymmetric and convoluted, depicting fanciful plants in the forms of fans, swirls and rosettes. To intensify and highlight The designs are often the decorations, cuts are made asymmetric, which enhances in the base of the plate. the rhythm of the entire piece. The handgrip resembles a winding broccade spiral from which tiny, light leaflets emerge AH.52

54 Lever Handles - CASSINA ENRICO CASSINA - Classic lever handles FIRST EMPIRE A cultured, majestic and celebratory style deeply inspired by Napoleon I. The ancient forms serve to glorify an ideal from a romantic perspective. Symbols of glory and prosperity abound, such as a laurel and palm leaves. The end motif elegantly and majestically evokes a diadem. Palm leaves are a symbol of prosperity and peace, the laurel branch is an emblem of power and glory. A small detail that recalls the abacus (end section) of a capital. SECOND EMPIRE A decoration that is strongly influenced by the language of the First Empire style. However, luxury is more pronounced tending toward a miscellaneous pastiche of forms. A restrained linearity of form is allied to decorative elements such as rosettes, swirls and plants. A restrained linearity controls and highlights the decorative elements. The details are similar to the luxurious style of Luis XVI but more minimal. Decorations are significant and defined against the background while maintaining their balance and measure. ART DECO The Floral style sinuosity remains but the natural motifs are replaced by a cubism-inspired geometry. Decoration are less apparent. The key features included symmetrical order, interlocking and shifted concentric circles, rhomboids and zigzag patterns. Upper motif on the fountain and Geometrical forms with bevelled the slanting element with edges and grooves bring to mind spherical ends, such as the architecture of a skyscraper. The shape of the handle mirrors its functional ambedded gemstones. use. The sinusoidal helix is highly typical. VICTRORIAN A variety of different artistic languages are categorized under the Victorian style, which is divided into three phases: the first inspired by nature, the second a Neo-Renaissance style rich in inlaid figures and the third eclectic with a strong influence from oriental elements. Upper and lower part of Even the contours of the handle recall The decorative motifs are stylized the plate have a vaguely the architectural shape of the plate; and sinuous, highly influenced gothic flavour is almost geometrical. by oriental calligraphy. AH.53

55 Lever Handles - CASSINA Lever handle sets - FIRST EMPIRE Lever handle sets - SECOND EMPIRE Entrance Dummy Entrance Dummy Brass polished PVD Brass polished PVD Brass antique coloured Brass antique coloured Brass polished PVD Brass antique coloured Brass polished PVD Brass antique coloured AH.54

56 Lever Handles - CASSINA Lever handle sets - LOUISXV Lever handle sets - MANNERISM Entrance Dummy Entrance Dummy Brass polished PVD Brass polished PVD Brass antique coloured Brass antique coloured Brass polished PVD Brass antique coloured Brass polished PVD Brass antique coloured AH.55

57 Lever Handles - CASSINA Lever handle sets - ART DECOR Lever handle sets - VICTORIAN Entrance Dummy Entrance Dummy Brass polished PVD Brass polished PVD Brass chrome plated polished Brass chrome plated polished Brass polished PVD Brass chrome plated polished Brass polished PVD Brass chrome plated polished AH.56

58 Lever Handles - CASSINA Lever handle sets Version Entrance Dummy Version Entrance Dummy Brass antique coloured DIN right hand Brass polished PVD DIN right hand DIN left hand DIN left hand Order reference Mortise lock and round cylinder...page.58 AH.57

59 Lever Handles - CASSINA Mortise lock and round cylinder Technical data Backset: 70 mm For door thickness: mm Set mortise locks Set round cylinders Striking plate Brass polished PVD Brass antique coloured AH.58

60 Lever Handles - CASSINA AH.59

61 Lever Handles - FSB AH.60

62 Lever Handles - FSB Lever handle sets Pull handle set Brass bronze coloured Brass bronze coloured Brass bronze coloured AH.6