Edition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue

Transcription

1 ratiopacpro

2 Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases Subracks/ 19" chassis... 6 Front panels, plug-in units... 7 Systems... 8 ratiopacpro Suitable for extractor handles according to IEEE /11 for CompactPCI and VME64x applications ratiopacpro air 1 U for ventilation (1/2 U at top, 1/2 U at bottom) Power supply units... 9 Backplanes Connectors, front panel component system Standards Internal and external dimensions according to: IEC / IEEE IEC / IEEE /11 Protection type IP 20 according to IEC Protective grounding connections according to: EN / VDE 0160 EN / VDE 0805 EN / VDE 0411 Part 1 EN A2 / VDE 0411 Part 1/ A1 EMC tests in accordance with VG part 15 Modification Easy conversion from desktop case into 19" subrack case Special colours Further depths and widths Fan rear panels Customized cut-out in front panel, rear panel, cover and base plate Assembly service according to customer specification Appendix Further important information can be found on the internet under 5.2 UK 04/2006

3 Desk-top cases Y Overview Y Desk-top case with 19" compatible dimensions PRO air is 1 U larger than PRO, (1/2 U at top, 1/2 U at bottom for ventilation) Identical board space for PRO and PRO air Symmetrical design, identical front and rear EMC shielding retrofittable Suitable for CompactPCI and VME64x applications Hidden screws, covers removable without tools ratiopacpro Cases with bezel, front handle and 19" bracket, unshielded Complete case with bezel, shielded and unshielded, extended scope of supply Tower ratiopacpro Case Complete case Dimensions Tower case Small case Small case, horizontal board insertion ratiopacpro air Case Complete case Dimensions Small case Text ratiopacpro air Case with bezel, front handles or 19 bracket, unshielded Complete case with bezel, shielded and unshielded, extended scope of supply Small case, horizontal board insertion Accessories EMC gasketing for case EMC gasketing for front panels and horizontal rails Front panels Rear panels Tip-up feet Air filters Earthing kit Front handles " mounting angles for conversion Coloured films for front handle and cover Cable holders Air baffles Strap handles Tip-up carrying handles Screws, nuts, tools Horizontal / central rails Threaded inserts, perforation and insulation strips Divider plates Chassis plates Horizontal board assembly Combined mounting Support members Guide rails UK 04/

4 Desk-top cases Y ratiopacpro case Y Available in three versions: with bezel with front handle with 19" brackets Unshielded (shielding retrofittable) Symmetrical design, identical front and rear Bezel Front handle 19" bracket Delivery comprises (in kit form) 1 2 Side panel, Al, passivated 2 2 Side trim, Al, visible surface powder coated, RAL Rear trim, Zn die-cast, powder coated, RAL a 2 Front trim, Zn die-cast, powder coated, RAL b 2 Front handle, Al die-cast, powder coated, RAL c 2 19" mounting angle, Al die-cast, powder coated, RAL Horizontal rail, Al, visible surface powder coated, RAL Top cover and base cover, Al, internal surface conductive, visible surface powder coated, RAL 9006, with GND/ earthing tag, base cover with vent slots 12 4 Case foot, PC, black, with anti-slip protection 13 1 Assembly kit 3a, 3b or 3c depending on selection Order information, see following page For further information /oneclick UK 04/2006

5 Desk-top cases Y Width W Depth D Case height H HP mm 2 U 3 U 4 U 5 U 6 U Order no. Order no. Order no. Order no. Order no. Side panel classification (1 U - 3 U - 1 U) (3 U - 2 U) With front handle RPPR With bezel RPPR With 19'' mounting bracket RPPR Dimensions marked with "-" are available on request, as well as other widths and depths Dimensions, see page 5.7 Components, see page 5.15 UK 04/

6 Desk-top cases Y ratiopacpro complete case Y Desk-top enclosure with bezel Unshielded or EMC shielded Symmetrical design, identical front and rear Threaded insert, perforated strip, shielding components pre-mounted, prepared for backplane assembly with insulation strips Bezel Delivery comprises (in kit form) w/o EMC with EMC Side panel, Al, passivated Side plate, visible surface RAL Cover, Zn die-cast, RAL 7016, pre-assembled only for EMC version Horizontal rail, Al, visible surface RAL Rear horizontal rail, Al Centre horizontal rail (only for 6 U), Al 7a U: threaded inserts, St, pre-assembled, for indirect backplane assembly with insulation strips 7b U: threaded inserts, St, pre-assembled, for indirect backplane assembly with insulation strips 8 4 Perforated strip, Al, 1 mm, pre-assembled Insulation strip, PBT UL-94 V Rear panel with perforation, Al, 2.5 mm Top and base cover, Al, internal surface conductive, visible surface RAL 9006, with GND/earthing tag, base with vent slots Case foot, PC, black, anti-slip protection 14 1 Contact strip for side panel, pre-assembled (kit) 15 1 Contact strip for cover plate, pre-assembled (kit) 16 4 Contact strip for front panel - horizontal rails 1 1 GND/earthing kit 1 1 Assembly kit Height H Width w Depth D Unshielded EMC shielded U HP mm Order no. Order no Dimensions, see page 5.7 Components, see page 5.15 Front handle and 19" mounting angle, see page UK 04/2006

7 Desk-top cases Y Dimensions ratiopacpro Text A = cover, B = front handle, C = 19" mounting angle rppr6637 Dimensions table ratiopacpro Text Height H h Width Usable depth d W W1 W2 w U mm mm HP mm mm mm mm D mm d mm D mm d mm D mm d mm D mm d mm D mm d mm 2 88,1 67, ,42 177,62 198, ,1 67, ,74 269, ,1 67, ,42 355,42 375, ,1 67, ,90 462,10 482, ,42 177,62 198, ,74 269, ,42 355,42 375, ,90 462,10 482, , ,74 269, , ,42 355,42 375, , ,90 462,10 482, , ,42 177,62 198, , ,74 269, , ,42 355,42 375, , ,90 462,10 482, ,74 269, ,42 355,42 375, ,90 462,10 482, UK 04/

8 Desk-top cases Y ratiopacpro tower 3 and 4 U width Y Mounting space 3 or 4 U, 84 HP, depth 475 mm Case on the basis of ratiopacpro Delivery comprises (in kit form) 1 2 Side cover with GND/earthing tag, Al, visible surface powder coated, internal surface conductive, RAL Horizontal rail, Al, visible surface powder coated, RAL Bezel, Zn die-cast, RAL Top cover, Al, visible surface powder coated, RAL Case foot, Al, powder coated, RAL 7016, with anti-slip protection 8 1 Assembly kit Width Width A Width W Width w Order no. U mm mm mm Components, see page 5.15 For further information /oneclick 1) = open space between the horizontal rails 2) = max. mounting depth UK 04/2006

9 Desk-top cases Y ratiopacpro small case Y Symmetrical design, identical front and rear Board space according to IEC EMC shielding retrofittable Suitable for extractor handle according to IEEE /11 Invisible screws, cover can be removed without tools Delivery comprises (assembled) Assembly plate at bottom / top, Al, passivated 2 2 Side cover, Al, internal surface conductive, visible surface powder coated, RAL 9006, with GND/ earthing tag 3 2 Top and base cover, Al, internal surface conductive, visible surface powder coated, RAL Bezel, Zn die-cast, powder coated, RAL Horizontal rail, Al, visible surface powder coated, RAL Case foot, PC, black, with anti-slip protection 7 2 Rear horizontal rail, L-ST light (4 retention screws) 8 6 Threaded insert M2,5, St, 4 x assembled at item Insulation strip, PBT UL 94 V-0 grey Case height H Usable height Width W Depth Order no. D mm HP U mm Components, see page For further information /oneclick UK 04/

10 Desk-top cases Y air ratiopacpro air case air Y The case has 2 x 1/2 U spaces for ventilation Available in three versions: with bezel with front handle with 19" bracket Unshielded (shielding retrofittable) Symmetrical design, identical front and rear Bezel Front handle 19" bracket Delivery comprises (in kit form) 1 2 Side panel, AI, passivated 2 2 Side cover, Al, visible surface, powder coated, RAL Rear cover, Zn die-cast, powder coated, RAL a 2 Front cover, Zn die-cast, powder coated, RAL b 2 Front handle, Al die-cast, powder coated, RAL c 2 19" mounting angle, Al die-cast, powder coated, RAL Horizontal rail, Al, visible surface powder coated, RAL Top cover and base cover, Al, internal surface conductive, visible surface powder coated, RAL 9006, with GND/earthing tag, top cover and base cover with vent slots 12 4 Case foot, PC, black, with anti-slip protection 13 2 Filter mat 14 1 Assembly kit 3a, 3b or 3c depending on selection For further information /oneclick Order information, see following page UK 04/2006

11 Desk-top cases Y air With front handle Width w Depth D Case height H 4 U 5 U 7 U Board height h 3 U 4 U 6 U HP mm Order no. Order no. Order no With bezel With 19" mounting bracket Dimensions marked with "-" are available on request, as well as other widths and depths Dimensions, see page 5.13 Components, see page 5.15 UK 04/

12 Desk-top cases Y air ratiopacpro air complete case air Y The case has 2 x 1/2 U spaces for ventilation Desk-top enclosure with bezel, unshielded or EMC shielded Symmetrical design, identical front and rear Threaded insert, perforated strip, shielding components are pre-mounted, prepared for backplane assembly with insulation strips Bezel Delivery comprises (in kit form) without EMC with EMC Side panel, Al, passivated Side cover, visible surface RAL Cover, Zn die-cast, RAL 7016, pre-assembled only for EMC version Horizontal rail, Al, visible surface RAL Rear horizontal rail, Al Horizontal rail (only for 6 U), Al 7a U: threaded insert, St, pre-assembled, for indirect backplane assembly with insulation strips 7b U: threaded insert, St, pre-assembled, for indirect backplane assembly with insulation strips 8 4 Perforated strip, pre-assembled Insulation strip, PBT UL 94 V Rear panel, Al 2,5 mm Top cover and base cover, Al, internal surface conductive, visible surface RAL 9006, with GND/ earthing tag, top cover and base cover with vent slots Case foot, PC, black, anti-slip protection Filter mat 14 1 Contact strip for side panel, pre-assembled (kit) 15 1 Contact strip for cover plate, pre-assembled (kit) 16 4 Contact strip for front panel - horizontal rails 1 1 GND/earthing kit 1 1 Assembly kit 1 1 Air baffle Case height H Board height h Width w Depth D Unshielded EMC shielded U U HP mm Order no. Order no Dimensions, see page 5.13 Components, see page 5.15 Front handle and 19" mounting angle, see page UK 04/2006

13 Desk-top cases Y air Dimensions ratiopacpro air Text A = cover, B = front handle, C = 19" mounting angle Dimensions table ratiopacpro air Text Height H h Width Usable depth d W W1 W2 w U mm mm HP mm mm mm mm D mm d mm D mm d mm D mm d mm D mm d mm D mm d mm ,42 177,62 198, ,74 269, ,22 355,42 375, ,90 462,10 482, , ,74 269, , ,22 355,42 375, , ,74 269, ,22 355,42 375, UK 04/

14 Desk-top cases Y air ratiopacpro air small case air Y Lateral space for ventilation Symmetrical design, identical front and rear Board mounting according to IEC EMC shielding retrofittable Suitable for extractor handle according to IEEE /11 Invisible screws, cover can be removed without tools Delivery comprises (assembled) Assembly plate bottom / top, Al, passivated 2 2 Side cover with perforation (from height of 8 HP), Al, internal surface conductive, visible surface powder coated, RAL 9006, with GND/earthing tag 3 2 Top cover and base cover, Al, internal surface conductive, visible surface powder coated, RAL Bezel, Zn die-cast, powder coated, RAL Horizontal rail, Al, visible surface powder coated, RAL Case foot, assembled, PC, black, with anti-slip protection 7 2 Rear horizontal rail, L-ST light (4 retention screws) 8 6 Threaded insert M2,5, St, 4 x assembled at item Insulation strip, PBT UL 94 V-0 grey Case height H Usable height Width W Depth Order no. D mm HP U mm Components, see page For further information /oneclick UK 04/2006

15 Desk-top cases Y / -air EMC gasketing for case Between front panel / rear panel and side panel Between side panel and cover plate Between front panel / rear panel and horizontal rail Between horizontal rails / -air Y EMC gasketing front panel / rear panel - side panel / -air Y For vertical EMC shielding between shielded plug-in units and side panel Sufficient for one case Delivery comprises (kit) EMC contact strip, Al extrusion 2 2 EMC profile seal, core: foam, sleeve: textile cladding with CuNi coating 3 1 Assembly kit rppr6639 Height Order no. U EMC gasketing side panel - cover plate / -air Y For horizontal EMC shielding between side panels and cover plates Delivery comprises (kit) 1 4 Contact strip, stainless steel Depth Order no. mm RPPR6640 For further information /oneclick UK 04/

16 Desk-top cases Y / -air EMC gasketing front panel / rear panel - horizontal rail The contact strip is clipped onto the horizontal rail and sets up the contact to front panel or rear panel Can be used for rear horizontal rails (H-VT, L-VT) and all front horizontal rails Delivery comprises 1 10/100 EMC gasketing, stainless steel rppr6739 Width Width Qty / PU Order no. HP mm For further information /oneclick EMC gasketing horizontal rails / -air Y For shielding of two horizontal rails located directly above each other with vertical division of the mounting height Delivery comprises 1 1 Cover strip, Al, 1 mm 2 2 Contact spring, stainless steel BPA46548BZA45877 Length Order no. HP Assembly tool for EMC contact strips (horizontal rail), 1piece Assembly tool aza45937 For further information /oneclick 5.16 UK 04/2006

17 Desk-top cases Y / -air Front panel, clipped / -air Y Front panels can also be used as rear panels Assembly without screws Unshielded Clipped between side panel and mounting parts like cover, 19" mounting bracket or handle Delivery comprises 1 1 Front panel, Al, 2.5 mm, front: anodised, rear: colour passivated For case height Height H For case width Width W Order no. U mm HP mm Front panels, bolted-on, see chapter Front Panels, Plug-in units For further information /oneclick UK 04/

18 Desk-top cases Y / -air Rear panel with perforation / -air Y Shielded and unshielded versions available For mounting on horizontal rails Shielded with EMC profile sealing Delivery comprises (in kit form) 1 1 Rear panel shielded with bracket for EMC profile sealing, Al, 2.5 mm, front: anodised, rear: colour passivated Shielded Unshielded Height H Width W B h Shielded U mm HP mm mm mm Order no. Order no Please order EMC profile gasket for shielded rear panel separately Assembly kit, see chapter Front panels, Plug-in units Rear panels / front panels without perforation, see chapter Front panels, Plug-in units EMC sealing Front panels Delivery comprises (kit) 1 10 / 100 EMC profile sealing, core: foam, sleeve: textile cladding with CuNi surface coating Height Height Qty / PU Order no. U mm UK 04/2006

19 Desk-top cases Y / -air Plastic tip-up foot and stacking aid / -air Y Can be used instead of standard feet Carrying capacity: 25 kg per foot Mounting holes in bottom of casing Delivery comprises ((kit)) 1 4 Foot, PA UL 94 V Anti-slip protection, TPE 3 2 Tip-up, PA UL 94 V Assembly kit ø 3.1 ø ~49 Description Order no. Tip-up feet, silver, similar to RAL Tip-up feet, anthracite, similar to RAL Stacking aid, silver, similar to RAL 9006, PA UL 94 V-0, PU 4 pieces Stacking aid, anthracite, similar to RAL 7016, PA UL 94 V-0, PU 4 pieces For assembly of stacking aid case tip-up feet are necessary For further information /oneclick Tip-up foot Stacking aid / Design element UK 04/

20 Desk-top cases Y / -air Air filter for ratiopacpro air / -air Y Subsequent assembly without reworking and tools Filter replacement without opening the case, IP protection retained Delivery comprises (kit) 1 1 Filter holder, Al, 1 mm, powder coated RAL Filter mat, synthetic fibre 3 1 Set of Velcro-type fasteners For case width Air filter Spare air filter HP Order no. Order no To optimise the air supply, plastic tip-up feet must be fitted to the case, see page 5.19 RPPR6658 For further information /oneclick Earthing kit / -air Y Establishes protective earth connections between side panels, base and cover plates and rear panel The earth connections comply with: EN EN EN EN A2 Description Order no. GND/earthing kit, 1 kit, Cu wire 1.5 mm 2, PVC sheeting AZA43284 For further information /oneclick 5.20 UK 04/2006

21 Desk-top cases Y / -air Front handle for 19" mounting angle / -air Y The front handles are screwed on the 19" mounting angles of the ratiopacpro case Retrofittable Load-carrying capacity 35 kg Delivery comprises 1 2 Front handle with assembly kit, Al die-cast, powder coated RAL 7016 ratiopacpro air 4 U, ratiopacpro 3 U up to 6 U For case height Description A Order no. U mm 3 ratiopacpro ratiopacpro ratiopacpro air ratiopacpro air air ratiopacpro air air ratiopacpro air Further handles on request For further information /oneclick ratiopacpro air 5 U and 7 U UK 04/

22 Desk-top cases Y / -air Front handle / -air Y For assembly of front handle on case (conversion of case with bezel or 19" mounting angle) Delivery comprises (kit) 1 2 Front handle, Al die-cast, powder coated RAL 7016 Front handle for Order no. ratiopacpro 3 U ratiopacpro 4 U ratiopacpro 5 U ratiopacpro 6 U ratiopacpro air 3/4 U ratiopacpro air 4/5 U ratiopacpro air 6/7 U RPPR6651 For further information /oneclick 19" mounting angle for conversion / -air Y For assembly of 19" mounting angle on case (conversion of case with bezel or front handle) Delivery comprises (kit) Qty Description 2 19" mounting angle, Al die-cast, powder coated RAL " mounting angle Order no. ratiopacpro 2 U ratiopacpro 3 U ratiopacpro 4 U ratiopacpro 5 U ratiopacpro 6 U ratiopacpro air 4 U ratiopacpro air 5 U ratiopacpro air 7 U RPPR6652 Slide rails cannot be used for installation in cabinets and 19" cases For further information /oneclick 5.22 UK 04/2006

23 Desk-top cases Y / -air Coloured films for front handle and cover / -air Y Delivery comprises Quantity (films/ sheets) Handle height in U see Description Polyester film 0.07 mm, with adhesive film, 9 mm length (see ) Handle height Length Qty / PU Raspberry red RAL 3027 Aluminium white RAL 9006 Zinc yellow RAL 1018 U mm Order no. Order no. Order no ; 4air , 5air , 7air For further information /oneclick Cable holder Accessories I/B Delivery comprises (kit) 1 2 Cable holder, ABS, UL 94 V-0, RAL 7016, for cable between 8 mm and 12 mm 2 1 Drilling template for holes in rear panel for each cable holder 3 1 Assembly kit Description Order no. Cable holder For further information /oneclick ppa45107 ppa45110 UK 04/

24 Desk-top cases Y / -air Air baffle for ratiopacpro air / -air Y The air baffle (item 1) closes the space (1/2 U) between rear horizontal rail and base cover Delivery comprises (in kit form) 1 1 Air baffle: PE foam, self-adhesive, temperature range: 20 C C For case width Length Order no. HP mm Fan rear panel available on request For further information /oneclick Strap handle / -air Y Retrofittable without mechanical reworking of the case Load-carrying capacity 20 kg Delivery comprises (kit) 1 1 Handle, steel spring, plastic sheathed (flexible plastic), RAL Side panel, Al, visible surface powder coated, RAL Adaptor, Al die-cast 4 1 Assembly kit For case depth For case height 3 U, 4 U air For case height 4 U, 5 U air mm Order no. Order no For further information /oneclick 5.24 UK 04/2006

25 Desk-top cases Y / -air Tip-up carrying handle / -air Y Retrofittable without mechanical reworking of the case Adjustable in 30 grids Load-carrying capacity 30 kg Delivery comprises (kit) 1 1 Carrying bar, Al extrusion, powder coated, RAL Handle shell, ABS, UL 94 V-0, RAL Tip-up protector, ABS, UL 94 V-0, RAL Notch device, Al die-cast 5 2 Cover caps, ABS, UL 94 V-0, RAL 7016 RPA43897 RPA43898 For case height For case width For case depth Tip-up carrying handle Assembly kit U HP mm Order no. Order no. 3, 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 4-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air , 5-air Not in conjunction with front handles for 4, 5-air U Please order assembly kit for tip-up carrying handle separately For further information /oneclick UK 04/

26 Desk-top cases Y / -air Torx pan head screws / -air Y Description Application Material Dimension Qty / PU Order no. Torx pan head screw For horizontal rail to side panel, with earthing function St, zinc-plated M AZA45923 Torx pan head screw For horizontal rail to side panel, if guide rail bolted onto slot 1 St, zinc-plated M Nut / -air Y Description Application Material Dimension Qty / PU Order no. Square nut For mounting of components on side panels, contact strips, chassis plates St, zinc-plated M AZA45921 Assembly tool Description Application Dimension Qty / PU Order no. T Torx screwdriver T AZA45925 Torx bit for screwdriver T T AZA45924 Assembly tool Exclusively for installation of EMC contact strips on horizontal rail cover plates AZA45938 aza45938 Assembly tool For front panels with slot, for assembly of EMC contact strips AZA45938 aza UK 04/2006

27 Desk-top cases Y / -air Mounting positions ratiopacpro horizontal / central rails Front Rear Front Rear 2 U 3 U 4 U (3 U + 1 U) U (1 U + 3 U + 1 U) 5 U (3 U + 2 U) U 6 U (2 x 3 U) UK 04/

28 Desk-top cases Y / -air Mounting position ratiopacpro air horizontal / central rails Front Rear Front Rear 4-air U (1/2 U + 3 U + 1/2 U) 5-air U (1/2 U + 3 U + 1 U + 1/2 U) air U (1/2 U + 6 U + 1/2 U) 7-air U (1/2 U + 3 U + 3 U + 1/2 U) UK 04/2006

29 Desk-top cases Y Front horizontal rails Y Type L-KD light short lip Type H-KD robust short lip Type H-LD robust For assembly at front top or bottom, with HP print 28 HP, Al extrusion, finish anodised, contact surface conductive Standard front horizontal rail For high mechanical demands For CompactPCI, VME64x systems Usable length length SPQ 1) HP mm 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces Torx pan head screw, 4 x ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item Rear horizontal rails Y Type L-ST light Type H-ST robust Type L-VT light Type H-VT robust Type L-MZ light, with Z-rail long lip Type H-MZ robust standard standard + 3 mm with Z-rail For assembly at rear top or bottom, with HP print 28 HP, Al extrusion, finish anodised, contact surface conductive For indirect mounting of backplanes via insulation strip, order insulation strip separately BZA For indirect mounting of backplanes via insulation strip, order insulation strip separately For direct backplane assembly For CompactPCI, VME64x system For direct mounting of connectors according to EN (DIN 41612) For direct mounting of connectors according to EN (DIN 41612) Usable length Length SPQ 1) HP mm 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces Torx pan head screw, 4 x ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item UK 04/

30 5 Desk-top cases Y Rear horizontal rails for subracks 6 and 9 U Y Type ST Type VT, +3mm Type MZ Type AB For installation between rear horizontal rail at top and bottom, Al extrusion, finish anodised For indirect mounting of backplanes via insulation strip, order insulation strip separately For direct backplane assembly For direct mounting of connectors according to EN (DIN 41612) For CompactPCI at rear I/O-area and 3, 6 U assembly Usable length Length SPQ 1) HP mm 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces SPQ 1) 10 pieces Torx pan head screw, 4 x ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item Threaded inserts, perforated strips, insulation strips Y Threaded inserts 2 Perforated strips Item 1 Insulation strips 5, BZA45853 BZ6749 Required for assembly of front panels on horizontal rail; use collar screw 12.3 mm, see page 5.37 For centring of shielded plug-in units, Al, 1 mm, please order grub screw for fixing separately For indirect mounting of backplanes Usable length Length M2,5 M3 Length Length HP mm SPQ 1) 10 pieces SPQ 1) 10 pieces mm SPQ 1) 10 pieces mm SPQ 1) 10 pieces Grub screw M2,5 x 8, PU 100 pieces Grub screw M2,5 x 9, PU 100 pieces Grub screw M3 x 8, PU 100 pieces ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item 5.30 UK 04/2006

31 Desk-top cases Y Z-rails, perforated rails Y IEC DIN EN Z-rail For connectors 31 pin, DIN41617 Perforated rail EN , DIN BZA45849 BZA45850 BZA45848 For assembly of connectors with ST horizontal rail; please order threaded inserts and screw separately For assembly of connectors on ST; please order threaded inserts and screw for horizontal rail separately For assembly of connectors on VT horizontal rail; please order threaded inserts and screw separately Usable length Length HP mm 1 piece 1 piece PU 4 pieces Screw M2,5 x 7, PU 100 pieces Screw M2,5 x 10, PU 100 pieces Divider plate Accessories D Assembly by clipping into horizontal rails Space requirement on component side: 2.0 mm Delivery comprises 1 1 Divider plate, 1 mm stainless steel Stainless steel gasketing (assembly position) BPA45912 Height Depth A B H Order no. U mm mm mm mm Front Rear BPA45911 Subsequent installation of divider plate in pre-mounted subrack requires removal of the horizontal rails beforehand Textile gasketing (assembly position) For further information /oneclick Front Rear UK 04/

32 Desk-top cases Y Chassis plate full width Chassis plate Y For assembly of heavy accessories Chassis plate full width The chassis plate is as wide as the subrack/system and is fixed on the side panel. Chassis plate partial width The chassis plate is assembled on a side panel with a mounting strip. Delivery comprises 1 1 Chassis plate, Al, 1.5 mm Chassis plate partial width BPA45875 Width B B b n Board length Order no. HP mm mm mm Torx pan head screw Torx screw M4 6, St, zinc-plated, PU 100 pieces Square nuts M4, St, zinc-plated, PU 100 pieces Torx screw 2,5 10, zinc-plated, PU 100 pieces BPA45876 Square nuts are required for assembly on side panel 280 mm deep version available on request For partial width mounting strips are necessary; please order separately, see page 5.33 For further information /oneclick Depth D = board length - 47,5 mm UK 04/2006

33 Desk-top cases Y Mounting strip for chassis plate Y For assembly of chassis plates partial width Suitable for assembly on all europacpro horizontal rails Delivery comprises 1 1 Assembly strip, St, zinc-plated, 2 mm BPA46557 Length Board length Order no. mm mm Assembly parts for mounting strips Torx screw, M2,5 5, St, zinc-plated, PU 100 pieces screws are required per assembly strip For further information /oneclick UK 04/

34 Desk-top cases Y Horizontal board assembly For horizontal assembly of double euroboards in 3 or 4 U high subracks/cases BPA45914 Delivery comprises 1 4 Support member, Zn die-cast 2 2 Front horizontal rail, type heavy (H), with short lip (H-KD), long lip (H-LD), Al extrusion 3a 2 Rear horizontal rail, type heavy, + 3 mm (H-VT) 3b 2 Rear horizontal rail, with Z (H-MZ), Al extrusion 4 a 1 Horizontal rail at rear centre (VT), Al extrusion 4 b 1 Horizontal rail at rear centre, with Z (MZ), Al extrusion 5a 6 Threaded inserts, St, zinc-plated 5b 2 Threaded inserts, St, zinc-plated (for version with Z) 6 1 Set of assembly parts including user manual 1TE = 1HP, 1HE = 1U, h = usable height Other dimensions and options Front assembly A Horizontal rail type H-KD Front horizontal rail, short lip (H-KD) = flush to end of front panels Height Usable Height h Assembly variants Order no. U HP 3 20 front A, rear C front B, rear C front A, rear D front B, rear D front A, rear C front B, rear C Please order front frame for EMC shielding separately Space requirement without cover is 53 HP For further information /oneclick Front assembly B Horizontal rail Type H-LD Front horizontal rail, long lip (H-LD) = required if IEEE handles are used on CompactPCI or VME64x Systems Rear assembly Horizontal rail Type H-VT Rear horizontal rail, + 3 mm (H-VT) = for direct assembly of backplane Rear assembly D Horizontal rail Type H-MZ Rear horizontal rail with Z (H-MZ) = for connector mounting according to IEC (DIN 41612) UK 04/2006

35 Desk-top cases Y Front frame EMC shielded for horizontal board mounting Y Front frame sets up the contact between subrack and plug-in units Delivery comprises 1 2 Horizontal cover, Al, 2.5 mm, front anodised, rear chromated 2 2 Vertical cover, Al extrusion, chromated 3 2 Contact strips for horizontal rail/vertical cover, stainless steel = 54 TE BPA46559 Height H H1 h2 Order no. U mm mm mm EMC contact strips 3 U, 97 mm, stainless steel, two pieces per front panel necessary, PU 10 pieces EMC contact strips 3 U, 97 mm, stainless steel, two pieces per front panel necessary, PU 100 pieces EMC contact strips 4 U, stainless steel, two pieces per front panel necessary, PU 10 pieces EMC contact strips 4 U, stainless steel, two pieces per front panel necessary, PU 100 pieces Assembly tool for EMC contact strip (front panel with slot), 1 piece TE = 1 HP, 1 HE = 1 U, h = usable height BPA45913 Please order accessories separately EMC contact strip stainless steel, see chapter Front panels, plug-in units Collar screw / sleeve for mounting on horizontal rail, see chapter 7 Perforated strips for centring, see page 5.30 Front frame unshielded for horizontal board assembly Y For horizontally assembled plug-in units Delivery comprises 1 1 Front frame with cut-out, Al, 2.5 mm, clear anodised Height H H Usable Height h Height h Order no. U mm HP mm For further information /oneclick bza43061 UK 04/

36 Desk-top cases Y Combined mounting as kit Division of the 6 U mounting space into the following areas: 2 3 U 1 6 U Suitable for installation of euroboards (100 mm high) and double euroboards (233.4 mm high) Delivery comprises (kit) 1 2 Front horizontal rail (H-KD), Al extrusion, anodised 2 2 Rear horizontal rail (AB), Al extrusion, anodised 3 2 Threaded insert, St, zinc-plated 4 2 Zn die-cast support member 5 1 Assembly kit incl. user manual BPA46549 Width pitch T1:T2 Order no. HP 20: : : : TE = 1HP, 1HE = 1U, h = usable height BZA42182 Please order separately: EMC gasket kit for horizontal rails Perforated strips EMC contact strips EMC contact strips are inserted into the lateral slots of the shielded front panels Delivery comprises 1 1 / 100 EMC contact strips, stainless steel Assembly tool BGA45760 Height Height Qty / PU Order no. U mm Assembly tool for EMC contact strip (front panel with slot), 1 piece Please order assembly tool separately For further information /oneclick aza UK 04/2006

37 Desk-top cases Y Combined mounting with individual parts The following parts should be ordered: Horizontal rails Threaded inserts Perforated strips Support member Front panel 6 U/2 HP EMC gasketing kit (horizontal rail/horizontal rail) Support member 6 U Y The support member is clipped into the grid holes of the horizontal rails. The support member can also be bolted on. Delivery comprises 4 1 Support member 6 U, Zn die-cast Description Order no. Support member 6 U Torx screw M4 14, zinc-plated, PU 100 pieces Torx screw 2,5 10, zinc-plated, PU 100 pieces bpa46551 Front panel 6 U/2 HP Delivery comprises 6 1 Front panel, AI, 2.5 mm, front anodised, rear colour passivated BPA46550 Description Qty Order no. Front panel 6 U 2 HP unshielded SPQ 1) 5 pieces Front panel 6 U 2 HP shielded (stainless steel sealing) Front panel, U profile with notch, 6 U / 2 HP (textile fabric) SPQ 1) 5 pieces SPQ 1) 5 pieces Collar screw with pozidrive M2,5, nickel-plated, PU 100 pieces Collar screw with pozidrive M2,5, black, zinc-plated, PU 100 pieces Glazing, plastic 2,7 x 5 x 1, PA 6, PU 100 pieces ) Delivery may be exclusively in standard pack quantity: Please order a minimum of 5 pieces of front panels or a multiple Please order the following parts separately: Stainless steel contact strips, see page 5.36 For shielded version perforated strips are necessary, see page 5.30 UK 04/

38 Desk-top cases Y Guide rail, one-piece For printed board lengths: 70, 160, 220, 280, 340, 400 mm Material: up to 280 mm length PBT UL 94-V-0, > 280 mm length, end piece PBT UL 94-V-0, middle part Al extrusion Guide rail: Plugable on to horizontal rails made of Al extrusion Plugable on metal which is 1.5 mm thick For plug-in units and frame-type units "Standard" "Standard" with DIN connector mounting For boards without front panel "Accessories" "Strengthened version" Board length Groove width Colour mm mm mm PU 2) 10 pieces SPQ 1) 50 pieces SPQ 1) 10 pairs PU 2) 10 pieces SPQ 1) 50 pieces SPQ 1) 50 pieces 70 2 red red red grey red grey red/silver red/silver red red Accessories ESD clip, PU 50 pieces ESD clip, for alignment pin, PU 50 pieces Retention screw, PU 100 pieces Board retainer, red, PU 10 pieces Printed board handle, red, PU 10 pieces Identification strips for printed board handle, red, PU 1 sheet = 438 pieces Coding block top, red, SPQ 50 pieces Coding block top, grey, SPQ 50 pieces Coding block at bottom, red, SPQ 50 pieces Coding block at bottom, grey, SPQ 50 pieces Coding peg, PU 100 pieces ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU UK 04/2006

39 Desk-top cases Y Guide rail, one-piece For CompactPCI, VME64x with coding For 4.4" boards For heavy modules, according to Offset 0.1" for power supply units according to Al extrusion, silver, "Stable version" Board height Groove width Colour PU 2) SPQ 1) PU 2) SPQ 1) SPQ 1) 50 pieces SPQ 1) 10 pieces mm mm mm 10 pieces 5 pieces 10 pieces 50 pieces 70 2 red grey red grey green red grey green red/silver red/silver silver red red/silver grey/silver red/silver grey/silver red/silver grey/silver silver Accessories ESD clip, PU 50 pieces ESD clip, for alignment pin, PU 50 pieces Retention screw, PU 100 pieces Coding peg, PU 100 pieces ) Delivery may be in Standard Pack Quantity (SPQ). Please order the SPQ quantity or a multiple. Pricing is per individual item 2) Order no. comprises one Packaging Unit (PU); multiple items in one pack. Pricing per PU. UK 04/