TUR 800/930/1100 MN series lathes.
|
|
- Theodore Clarke
- 7 years ago
- Views:
Transcription
1
2 TUR 800/930/1100 MN series lathes. Exceptional stability with high precision and unrivalled quality, FAT lathes will provide many years of reliable service for your business. The best combination of price and high efficiency your most cost effective solution. We are confident there is no better choice for your work shop on the market today! TUR 800/930/1100 MN is a high precision, high quality European product 100% manufactured in Poland. The purchased parts used in all our products only come from world leaders in machine tools parts manufacture and supply. The high level of standard equipment makes the TUR MN lathe a powerful tool which will increase the capacity of your work shop from the first day of operation! A large range of easy to install options will fulfil any special requirements. Special housing of rear spindle nose integrated with additional chip conveyer Hydraulic chuck Second spindle nose The headstock, made of one mono-block casting, is located on hardened and ground bed guide ways. Hand scraped contact surfaces ensure the best fit and durable alignment. High precision spindle bearings guarantee excellent stability and accuracy when machining. Pneumatic chuck does not reduce spindle bore
3 Optional executions: Quill operated both manually and hydraulically The standard 125 diameter tailstock quill diameter is located in a special extended body which increases machining range whilst keeping high rigidity. The quill diameter can be increased up to 140 or 10 for heavy duty machining. The bearing system for the quill is prepared for mounting the dead centre MT5 or MT and is available as an additional option. Quill operated hydraulically HD Tailstock with 10 Quill diameter for increased rigidity and load capacity Turret for static tools Combination of two 4-position horizontal Sauter turrets Full contouring C axis with independent, direct drive for spindle enables precise milling for interpolating machined work pieces Sauter turret for driven tools with options for C-axis spindle positioning: indexing every 2,5 degrees driven by main motor in combination with hydraulic brake and spindle encoder full contouring C-axis driven directly by separate servo motor Hydraulic brake with spindle encoder ensures very accurate positioning of C axis when working with driven tools Standard Multifix D1 toolpost Parat toolpost with optional Capto seat
4 OPTIONAL EQUIPMENT Milling-drilling unit mounted at the rear of the cross slide or an additional independently driven carriage (U-axis) Oil mist collector Milling-drilling unit Deep hole boring version: Boring tool held in spindle (rotating) and work piece is stationary. TUR 4 SMN version has special step bed design with additional guide ways. They permit tool to move along the whole machining length without collision with steady rests.
5 HD Boring bar attachment mounted on carriage with RH rail 4 position Sauter turret and milling unit WTO system enables drilling and milling operations at a high torque on tool spindle. Normal turning is still possible. Available version with Y-axis: shown for VDI 50 tooling Additional coolant tank with filtration and high pressure pump A wide range of steadies and rests is available to suit different machining applications, including: manual and hydraulic- self centring, steady or follow rests, C-form, ring rests and other.
6 MACHINE STANDARD EQUIPMENT CNC Siemens 840D SL Brushless AC servo motors Toolpost type Multifix Size D1 Tube lights (24V) in working area Complete coolant system Hydraulic aggregate Independent Z position operator panel Come-along system quick coupling between tailstock and carriage Emergency switch between tailstock and carriage X and Z axis absolute encoders Full rear guarding with sliding access doors Front double door, electrically secured Hand wheels for manual operation Automatic lubrication system Automatic gear change USB Port Absolute encoders Wide 22 / 24.5 bed with deep induction hardened and ground guide ways. Special design of massive 3-V ways is ideal for higher accuracy turning and boring applications. MACHINE OPTIONAL EQUIPMENT Various sizes of spindle bore: 220, 320, 30, 450 and other Rotating operator panel Manual steady and follow rests Hydraulic steady and follow rests Various types of chucks: manual pneumatic hydraulic with or without through hole T-slots face plate Disc type tool turret for static and driven tools 4-position head type turret Parat toolpost NC controlled C, Y, U axes Special milling-drilling systems Grinding unit Extra heavy-duty headstock version Bigger tailstock quill diameter with bearing system Hydraulic tailstock quill Chip conveyor Linear scale direct measuring system for Z- and X-axis Boring bar attachment Stronger spindle motor 37/5 kw Coolant station with filter and high pressure pomp Oil mist collector Other turning lengths Other turning diameters Other special equipment on request Wrzeciono z przelotem 450 i podwójnym nosem Essential features: Uchwyt hydrauliczny easy prograing using graphics and without need for knowledge of DIN/ISO extremely short prograing time clear display of all data in machining sequence prevention of invalid inputs thanks to dynamic online graphics simple management of tools wide range of standard machining and measuring cycles Surprisingly easy prograing! TUR MN with Siemens 840D SL allows you to work manually, semi-automatic or full CNC. The user friendly Siemens Shop Turn Conversational Prograing System will make your work efficient and enjoyable. Uchwyt specjalny Szczęki specjalne - opasające ze zintegrowanym kłem Fanuc or Fagor controller as an option
7 SPECIFICATIONS TUR 800 MN TUR 930 MN TUR 1100 MN WORKING RANGE Distance between centres Other lengths for request Swing over bed Swing over saddle Max. weight between centres (without steadies) Optional increased weight between centers kg Max. weight in chuck only Optional increased load capacity kg rpm I: 4 30, II: I: II: I: II: kw (S) Nm DIN55029 D1-11 D1-11 D1-11 Spindle bore Front spindle bearing diameter Enlarged spindle bore * DIN 5502 A2-15 A2-20 A2-20 A2-28 Max. spindle speed rpm Max. turning torque Nm HEADSTOCK Spindle speed, auto shifting, 2 ranges Main drive motor power Optional stronger main motor Max. turning torque Optional Spindle nose Camlock Spindle nose SADDLE Rapid travel Z-axis m/min Rapid travel X-axis m/min Cross slide travel X-axis Feed force transverse kn Feed force longitudinal kn Ball screw Z-axis Ball screw X-axis Length of carriage Width of cross slide Quill diameter 125 (140/10 option) 125 (140/10 option) 125 (140/10 option) Quill taper size Quill stroke Width of bed Width of lathe** Height of lathe length over rack and pinion TAILSTOCK MT (MT5 with bearing system) CAPACITY LATHE LENGTH Machining length / / / /.000 * Not available for 800MN size ** For transport the lathe fit to the standard truck and container. Subject to alterations without prior notice / /.400 / / 8.400
8 SHORT HISTORY OF FAT-HACO FAT Haco offers you the benefit of our vast experience since the year 1945 over machine tools have been sold in many countries around the world! Excellently equipped machine shop, assembly facility, research office and our own foundry allow us to manufacture most components by ourselves complete from casting to finished product. FAT works closely with you to develop the absolute best product for your needs. Our experience and quick reaction time will save you both time and money. Together, let s make creative imagination our only limitation! 189: 190: foundation as a Locksmith Company metal work company of Gustav Trelenberg for production of steel construction for the builiding industry, railways, trams and industrial locomotives. 1945: 1992: production of simple planing machines, saws and drills, later specializing in manufacturing horizontal lathes: TUC40, TUD40/50/3, TUR50/3 which were very well known in Poland and overseas markets. delivered the th machine tool made by FAT 1995: expanded the range of lathes to include universal lathes TUR 50/30/710, TUR 50/3/8 cnc lathes and highly productive multi-spindle automatics 1998: FAT joined the HACO GROUP - new investments and increased production of mn & cnc lathes - new machine shop - production of modern teach-in lathes using state-of-the-art Technology - special projects - new sales strategy through dealer network - taking over a cast-iron foundry in Koluszki - production of the heavy duty 4-guide ways lathes FAT S.A. Grabiszyńska Street 281 PL Wroclaw POLAND Phone: Fax: info@fathaco.com DISTRIBUTOR: website:
website: www.fathaco.com
SHORT HISTORY OF FAT-HACO FAT Haco offers you the benefit of our vast experience since the year 1945 over 5. machine tools have been sold in many countries around the world! Excellently equipped machine
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationThe teach-in lathe. New generation SE
The teach-in lathe New generation SE New generation SE Description Friendly user lathes with high chip removal capacity The SE Series combines the working capacity of a conventional lathe with the advantages
More informationThat s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
More informationBED TYPE MILLING CENTRE
TR BED TYPE MILLING CENTRE TR BED TYPE MILLING CENTRE BED TYPE MILLING CENTRE HIGH PERFORMANCE IN A COMPACT MACHINE PROVIDING ACCURATE COMPLEX MILLING TR BED TYPE MILLING CENTRE The TR milling centre is
More informationSAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
More informationWhirling Machine. New Dimension of Whirling Technology. Thread Whirling Machines. Big Workpiece Diameter. High Pitch Thread
LEISTRITZ PRODUKTIONSTECHNIK GMBH Thread Whirling Machines Whirling Machine New Dimension of Whirling Technology Big Workpiece Diameter High Pitch Thread Customer Satisfaction remains the Highest Priority
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationV-Series. 4-Way Precision Lathe with Automated Cycles. www.weiler.de. Precision in Every Dimension. New product: the first 4-way precision
Precision in Every Dimension Service New product: the first 4-way precision lathe with automated cycles V-Series 4-Way Precision Lathe with Automated Cycles www.weiler.de Manual/Engine Lathes Cycle-Controlled
More informationwww.toolmex.com +1-508-653-8897 800-992-4766
www.toolmex.com +1-508-653-8897 800-992-4766 SOLUTIONS TO MEET YOUR NEEDS BI BI BI BI BI BI BISO SO SO SO SO SO SON- N- N BI BI BI BI BI BI BIAL AL AL AL AL AL AL WOR OR OR OR OR OR ORKH KH KH KH KH KH
More informationCNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
More informationTurning Centres. MAX 5 From print to part to profit
Turning Centres MAX 5 From print to part to profit TMi and TMXi General purpose, heavy duty and high performance 2 axis lathes > TM6i > TM12i > TM8i > TM18i > TM10i > TM18Li > TMX8i > TMX10i Benefits of
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationwww.clausing-industrial.com MultiTurn CNC Combination Lathes Advanced Turning Technology
www.clausing-industrial.com MultiTurn CNC Combination Lathes Advanced Turning Technology MultiTurn The highly versatile flat bed design handles a wide range of turning applications: long shafts, bar stock,
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationStarChip 400. StarChip 400. More productive, more cost-effective - the Inclined Bed Lathe StarChip. CNC Inclined Bed Lathe. www.knuth.
CNC Inclined Bed Lathe More productive, more cost-effective - the Inclined Bed Lathe StarChip Center width 550 mm Turning diameter over bed (max) 360 mm Speed range 50-6000 min -1 8-station tool turret
More informationCNC - Lathe. in very maintained condition
CNC Lathe in very maintained condition Manufacture DOOSAN Type PUMA 2600 B Year of manufacture 2012 Control CNC FANUC 0iTD with Manual Guide i Machinenumber ML0200024 operating hours ca. 3.000 Spindle
More informationSAMSUNG Machine Tools
SAMSUNG Machine Tools LCV 55 / 65 / 8 VERTICAL MACHINING CENTERS SMEC Co., Ltd. 6671, Gasulri, Daesanmyeon, Changwonsi Gyeongsangnamdo, Korea 641921 Tel +82 55 25 4832(48) Fax +82 55 25 491(492) http://www.esmec.com
More informationSHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationCNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines
CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for
More informationTA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
More informationDUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design
More informationPBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationMachining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
More informationMarkets, where ZMM BULGARIA HOLDING is well known!
Markets, where ZMM BULGARIA HOLDING is well known! 1-3 INDUSTRIAL HOLDING BULGARIA 4-19 UNIVERSAL LATHES 20-35 UNIVERSAL LATHES WITH VARIABLE SPINDLE SPEED CONTROL 36-37 OIL COUNTRY LATHES 38-47 CNC LATHES
More informationNewland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
More informationQP-2040L CNC VERTICAL MACHINING CENTER
Page 1 of 8 QP-2040L CNC VERTICAL MACHINING CENTER Page 2 of 8 MACHINE FEATURES: This fully upgradeable VMC is designed to accommodate various upgrades in the future so that it can be reconfigured for
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationMULTITURRET BAR TURNING B446-465 T2 B446-465 T3
MULTITURRET AR TURNING 446-465 T2 446-465 T3 Double-spindle and double-turret turning centres featuring two Y-axes: from bar to the finished part 446-465 T2 years after the launch of the first QUATTRO
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationQP-2040 CNC VERTICAL MACHINING CENTER
Page 1 of 11 QP-2040 CNC VERTICAL MACHINING CENTER Page 2 of 11 CHEVALIER s QP series large capacity VMCs are designed for high precision and high productivity machining of large work pieces for aerospace,
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More informationCNC HARDWARE & TOOLING BASICS
Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,
More informationHIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER
HIGH PRODUCTION DUAL DRIVE HORIZONTAL MACHINING CENTER 14001 認 可 登 錄 14001 認 可 登 錄 1 Introducing all new H630B high speed horizontal machining center. Incorporates state of the art Dual Drive technology
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More information[ means: Easy handling for large parts. EMCO MAXXTURN 95 / 110. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMy] means: Easy handling for large parts. EMCO MAXXTURN 9 / 11 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 11 [Control unit] - Ergonomic, pivotable and slidable
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationDRILLFLEX CNC HORIZONTAL MACHINING CENTER
DRILLFLEX CNC HORIZONTAL MACHINING CENTER 02 DRILLFLEX CNC HORIZONTAL MACHINING CENTER MUBEA DRILLFLEX - DF 1100 TIME IS MONEY MUBEA SYSTEMS (DIVISION OF THE WORLDWIDE HACO GROUP) has developed a new automatic
More informationKey data. The practical machines for your specific grinding solution. A member of the United Grinding Group. The Art of Grinding.
The Art of Grinding. A member of the United Grinding Group CT450 / CT550 The practical machines for your specific grinding solution. Key data The CT450 / CT550 are very flexible internal cylindrical grinding
More informationMETAL-TURNING LATHE Built from Stock Parts
by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order
More informationMachining Center MODEL: VH-610 MACHINE FEATURES
Machining Center MODEL: VH-610 MACHINE FEATURES 10HP Spindle Motor, CAT40 Spindle Taper 8000 rpm spindle speed ( Optional 10,000 or 12,000 rpm ) Super grade Turcite-B On X/Y/Z Slideways Hardened & Ground
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationIBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#03 OCT 2014 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET
IBARMIA TECHNICAL SOLUTIONS JOURNAL // ibarmia.com //#0 OCT 04 ZVH 58/L6000 MULTIPROCESS: PROBABLY, THE MOST FLEXIBLE MACHINE IN THE MARKET HTL 5 kw, 500 rpm 800 Nm 000 kg High production system Fixed
More information[ means: Precision and reliability - in series. EMCO MAXXTURN 95. Universal turning center for machining of shaft- and chuck work
[ E[M]CONOMY] means: Precision and reliability - in series. EMCO MAXXTURN 95 Universal turning center for machining of shaft- and chuck work EMCO MAXXTURN 95 [Control unit] - Ergonomically designed - Sinumerik
More information10. CNC Hardware Basics
CAD/CAM Principles and Applications 10 CNC Hardware Basics 10-1/10-20 by P.N.Rao 10. CNC Hardware Basics 10.1 Structure of CNC machine tools Table 10.1 Some design criteria for CNC machine tool design
More informationSAMSUNG Machine Tools
SAMSUNG Machine Tools VERTICAL MACHINING CENTER SMEC Co., Ltd. 666, Gasul-ri, Daesan-myeon, Changwon-si Gyeongsangnam-do, Korea 641-921 Tel +82 55 250 4800 Fax +82 55 253 5355 http://www.esmec.com www.esmec.com
More informationRENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite
1 Horizontal Machining Center MATSUURA Model: H-Plus 300 PC 5 Year: 2008 Control: Matsuura G-Tech 30i No. of pallets: 5 Size (each) 300 x 300 mm. Table indexation: 1 Index speed: 1,5 sek./90 Index speed:
More informationMACHINING OPERATIONS AND MACHINE TOOLS
MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationFlexible High Tech Solutions for Industry
Vertical machining centre f milling and turning Flexible High Tech Solutions f Industry Those who look a little harder discover a lot me Machine Tools EN Customized Efficiency Machine Tools MAXIMA 12 K16/3
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationMachining Center MODEL: VL-850
Machining Center MODEL: VL-850 MACHINE FEATURES 10HP Spindle Motor BT40/CAT40/DIN40 spindle dia. 150mm, 100% balanced with low vibration performs high precision machining. 8000 rpm spindle speed, ( Optional
More informationThat s E[M]CONOMY: More value for money. EMCO MAXXTURN 65. Universal turning center for complete machining of bar stock and chuck work
[ That s ] E[M]CONOMY: More value for money. EMCO MAXXTURN 65 Universal turning center for complete machining of bar stock and chuck work EMCO MAXXTURN 65 [NEW] - Fanuc 31iB - TFT color monitor - USB interface
More informationSAMSUNG PL 30(PL 30L) TURNING CENTER
SAMSUNG PL 30(PL 30L) TURNING CENTER MACHINE CNSTRUCTIN / FEATURES PL 30 BED ne-piece 45 o rigid slant bed made of meehanite castiron Heavily ribbed torque tube design to prevent thermal deformation and
More informationManufacturing Processes II Prof. A. B Chattopadhyay Department of Mechanical Engineering Indian Institute of Technology, Kharagpur
Manufacturing Processes II Prof. A. B Chattopadhyay Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture No.23A Construction, Operation and Tool Layout of Semiautomatic
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationWeeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
More information[ means: Precision and reliability - In series. EMCO MAXXTURN 95. Universal CNC turning center for machining shafts and chuck parts
[ E[M]CONOMY] means: Precision and reliability - In series. EMCO MAXXTURN 95 Universal CNC turning center for machining shafts and chuck parts EMCO MAXXTURN 95 [Control unit] - Ergonomic, swivel-type control
More informationCNC Portal Milling Machine FZ 32. High Performance Milling Technology
CNC Portal Milling Machine FZ 32 High Performance Milling Technology FZ 32 HSC Portal Milling Machine with Overhead Gantry with upper moving portal high axial accelerations and perfect surface finishes
More informationComplete Solutions unlimited Possibilities. EMCO MAXXTURN 45
[ That s ] E[M]CONOMy: Complete Solutions unlimited Possibilities. EMCO MAXXTURN 45 Universal machining center for the complete machining of bar stock and chuck work EMCO MAXXTURN 45 [Y axis] - Travel
More informationMIKRON HPM 1150U HPM 1350U
MIKRON HPM 1150U HPM 1350U High performance milling versus high speed milling - the one cannot replace the other! While with high speed milling the objective is to create as much surface on the workpiece
More informationSpecifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)
Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical
More informationCT930 / CT960. Key data. The Allrounder for complex grinding tasks. A member of the UNITED GRINDING Group. The Art of Grinding.
The Art of Grinding. A member of the UNITED GRINDING Group The Allrounder for complex grinding tasks. Key data The CT930/CT960 are very flexible internal cylindrical grinding machines for medium-sized
More informationTurning centers. Mill Turn Lathes. With the most powerful control in industry: SingleMax
Turning centers Mill Turn Lathes With the most powerful control in industry: SingleMax TMi General purpose- and heavy duty-lathes > TM 6 i > TM 8 i > TM 10 i > TM i > TM 18 i > TM 18 Li Benefits of the
More informationwww.dreiling-maschinenbau.com Tel.: +49 (0) 36084 / 840-1100 Email: info@dreiling-maschinenbau.com
www.dreiling-maschinenbau.com Tel.: +49 (0) 36084 / 840-1100 Email: info@dreiling-maschinenbau.com Dreiling tool Shuttle system for a heavy duty milling machine (China) Dreiling Technical Data of the System:
More informationturning instead of measuring
PARAT -way-indexing-quickchange turret-toolpost turning instead of measuring Indexing accuracy 0,005 mm (0,0002 ) Internal and external operations in one setting Quick-clamping System with 0 Positions
More informationDismantling and Reassembly Guide
Super X3 Mill Dismantling and Reassembly Guide A picture story book to help you dismantle and reassemble your Sieg Super X3 Mill Arc Euro Trade Ltd. 10 Archdale Street, Syston, Leicester, LE7 1NA. Web:
More informationMilling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a
Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationInnovation / Perfection / Technology / Value. Innovation Design / Pursuing Perfection / Leading Technology / Value Created ESG 2448 2460 2480 24120
Innovation / Perfection / Technology / Value CNC Grinder TD Smart PLC control grinder HADC Precision hydrostatic guide way ADC Wheel top auto dressing and compensation ACUMEN II Auto dressing and compensation
More informationElectron S.R.L. B55 CNC TRAINING MACHINES
Electron S.R.L. Design Production & Trading of Educational Equipment B55 CNC TRAINING MACHINES Specifications may change without notice Page 1 of 12 File B55 MODULAR TRAINING SYSTEM FOR THE STUDY OF CNC
More informationStatic and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
More informationGang Type CNC Turning Center. KIT Series
Gang Type CNC Turning Center KIT Series The Best Suitable for Automation Line Gang Type CNC Lathe BASIC STRUCTURE Bed Guide Way Spindle & Block Tool Gearless Type Spindle High Frequency Spindle Motor KIT
More informationX.mill 1100 L. X.mill 1100 L. CNC Machining Center. Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D
CNC Machining Center Control GPlus 450 with touch-screen technology or Siemens Sinumerik 828 D description specifications GPlus 450 siemens 828 D www. k n u t h.d e Travel distances X axis 1100 mm Y axis
More informationPos. Qty. Article Description Price / Drilling capacity in steel 60 Ø 25 mm Tapping capacity M 20 Milling capacity in steel 60 150 cm³/min.
Offer 1 1 Vertical CNC-machining centre model FZ 12 W Magnum Completely refurbished pre-owned machine Updated in 2015 Year of construction: depends, weight 4.000 kg Scope of delivery: Column moving machining
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationPRODUCT DIVISION: CNC-Education Concept TURN 250 DATE: October 2012 page 1 of 26 TECHNICAL SPECIFICATION. Concept TURN 250
DATE: October 2012 page 1 of 26 TECHNICAL SPECIFICATION Concept TURN 250 PC-controlled CNC - lathe with interchangeable control WinNC Control Software SINUMERIK OPERATE SIEMENS 810D/840D SIEMENS 810/820
More informationStandard Version High Power Version
Standard Version High Power Version 1. Standard Version High Precision with Standard CNC 31i-B The Latest CNC, Servo Control Function High Rigidity Mechanical Design Direct Drive Rotary Table DDR Standard
More informationOur Stock Machines No cheap machines just well-priced and Great VALUE ones ALL reasonable offers will be considered
Supplyline CNC Ltd 116 Dursley Road Trowbridge Wiltshire BA14 7AY 00-44-1225-765732 sales@supplylinecnc.co.uk www.supplylinecnc.co.uk VAT 674 4338 16 Registered in England No. 3140626 Our Stock Machines
More informationSprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled
SprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled machines and machining centers. The system enables the creation
More informationA Whole NEW Level of Machining Freedom. SmithyCNC Bed Mills. Product Information
A Whole NEW Level of Machining Freedom SmithyCNC Bed Mills Product Information The Complete & Affordable CNC Machining System for the Visionary Machinist Here's the long-awaited new generation CNC machining
More informationCNC Bed Mills. Machining Centers. and. powered by. TW-32-Q now with up to 15 Hp. TW-43-HV our unique horizontal /vertical machining center
CNC Bed Mills and Machining Centers powered by OR TW-32-Q now with up to 15 Hp TW-43-HV our unique horizontal /vertical machining center TW-60-MCO # 40 or 50 taper and up to 30 hp TW-32-Q - handwheels
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationLIDKÖPING High Volume SGP 320 External Grinder / SSB 320 Internal Grinder
LIDKÖPING High Volume SGP 320 External Grinder / SSB 320 Internal Grinder TM Fast, precise and profitable About us KMT Precision Grinding develops, markets, manufactures, and installs high precision grinding
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationUltra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More information