TDA7496 5W+5W AMPLIFIER WITH DC VOLUME CONTROL
|
|
- Irene Stewart
- 7 years ago
- Views:
Transcription
1 WW AMPLIFIER WITH DC CONTROL W OUTPUT POWER R L = = 0% V CC = 22V STBY AND MUTE FUNCTIONS LOW TURNON TURNOFF POP NOISE LINEAR CONTROL DC COUPLED WITH POWER OP. AMP. NO BOUCHEROT CELL NO ST_BY RC INPUT NETWORK SINGLE SUPPLY RANGING UP TO 3V SHORT CIRCUIT PROTECTION THERMAL OVERLOAD PROTECTION INTERNALLY FIXED GAIN SOFT CLIPPING VARIABLE OUTPUT AFTER CONTROL CIRCUIT MULTIWATT PACKAGE MULTIPOWER BI0II TECHNOLOGY Multiwatt ORDERING NUMBER: TDA7496 DESCRIPTION The TDA7496 is a stereo W class AB power amplifier assembled i Multiwatt package, specially designed for high quality sound, TV applications. Features of the TDA7496 include linear volume control Standby and Mute functions. The TDA7496 is pin to pin compatible with TDA7496S, TDA7496SA, TDA749, TDA749SA, TDA7494S, TDA7494SA. BLOCK DIAGRAM VAROUT_R 2 3 INR 4 000µF 470nF OUTR OP AMP INL S_GND 8 MUTE/STBY PROTECTIONS 60K STBY MUTE OUTL 0K µf S STBY V S_GND V S2 MUTE 470nF OP AMP 000µF SVR 7 470µF 3 4 VAROUT_L V 00nF 300K D96AU440D September 2003 /
2 ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit DC Supply Voltage 3 V V IN Maximum Input Voltage 8 Vpp P tot Total Power Dissipation (T amb = 80 C) W T amb Ambient Operating Temperature () 0 to 70 C T stg,t J Storage and Junction Temperature 40 to 0 C V 3 Volume Control DC Voltage 7 V PIN CONNECTION (top view) OUTR OUTL MUTE STBY S_GND SVR N.C. INL VAROUT_L VAROUT_R INR D96AU44B THERMAL DATA Symbol Parameter Value Unit R th jcase Thermal Resistance junctioncase Typ. = 4; Max. = 4.6 C/W R th jamb Thermal Resistance junctionambient Max. 3 C/W ELECTRICAL CHARACTERISTCS (Refer to the test circuit V s = 22V; R L = 8Ω, R g = 0Ω, T amb = 2 C) Symbol Parameter Test Condition Min. Typ. Max. Unit V s Supply Voltage Range 0 32 V I q Total Quiescent Current 2 0 ma DCV os Output DC Offset Referred to SVR Potential No Input Signal 200 mv V O Quiescent Output Voltage V P O Output Power THD = 0%; R L = 8Ω; THD = %; R L = 8Ω; THD = 0%; R L = 4Ω; = 2V THD = %; R L = 4Ω; = 2V W W THD Total Harmonic Distortion G v = 30dB; P O = W; f = KHz 0.4 % 2/
3 ELECTRICAL CHARACTERISTCS (continued) (Refer to the test circuit V s = 22V; R L = 8Ω, R g = 0Ω, T amb = 2 C) Symbol Parameter Test Condition Min. Typ. Max. Unit I peak Output Peak Current (internally limited).0.3 A V IN Input Signal 2.8 Vrms G V Closed Loop Gain V Ol Ctrl >4.V db G VLine Monitor Out Gain V Ol Ctrl >4.V; Zload >Ω. 0. db A Min V OL Attenuation at Minimum Volume V Ol Ctrl <0.V 80 db BW 0.6 MHz e N Total Output Noise f = 20Hz to 22KHz PLAY, max volume f = 20Hz to 22KHz PLAY, max attenuation µv µv f = 20Hz to 22KHz MUTE 60 0 µv SR Slew Rate 8 V/µs R i Input Resistance KΩ R Var Out Variable Output Resistance Ω R L Var Out Variable Output Load 2 KΩ SVR Supply Voltage Rejection f = KHz; max volume C SVR = 470µF; V RIP = Vrms f = KHz; max attenuation C SVR = 470µF; V RIP = Vrms 3 39 db 6 db T M Thermal Muting 0 C T S Thermal Shutdown 60 C MUTE & INPUT SELECTION FUNCTIONS TON Standby ON Threshold 3. V TOFF Standby OFF Threshold. V V MUTEON Mute ON threshold 3. V V MUTEOFF Mute OFF threshold. V A MUTE Mute Attenuation 0 6 db I qstby Quiescent Standby 0.6 ma I stbybias Standby bias current Stand by ON: TBY = V; V mute = V 80 µa Play or Mute 20 µa I mutebias Mute Bias Current Mute µa Play µa 3/
4 APPLICATION SUGGESTIONS The recommended values of the external components are those shown on the application circuit of figure. Different values can be used, the following table can help the designer. COMPONENT SUGGESTION VALUE PURPOSE LARGER THAN SUGGESTION SMALLER THAN SUGGESTION R 300K Volume Control Circuit Larger volume regulation time Smaller volume regulation time R2 0K Mute time constant Larger mute on/off time Smaller mute on/off time P 0K Volume Control Circuit C 000µF Supply voltage bypass Danger of oscillation C2 470nF Input DC decoupling Lower low frequency cutoff Higher low frequency cutoff C3 470nF Input DC decoupling Lower low frequency cutoff Higher low frequency cutoff C4 470µF Ripple rejection Better SVR Worse SVR C 00nF Volume control time constant Larger volume regulation time Smaller volume regulation time C6 000µF Output DC decoupling Lower low frequency cutoff Higher low frequency cutoff C7 µf Mute time constant Larger mute on/off time Smaller mute on/off time C8 000µF Output DC decoupling Lower low frequency cutoff Higher low frequency cutoff C9 00nF Supply voltage bypass Danger of oscillation Figure. Application Circui C 000µF VAROUT_R C9 0.µF 2 3 INR C2 470nF 4 C8 000µF OUTR OP AMP INL S_GND C3 470nF 8 MUTE/STBY PROTECTIONS OP AMP C7 µf C6 000µF R2 0K OUTL S STBY S2 MUTE V S_GND V SVR 7 C4 470µF 3 4 C 00nF VAROUT_L R 300K TP VOL P 0K LOG V D96AU493D 4/
5 MUTE STANDBY TRUTH TABLE MUTE StBY OPERATING CONDITION H H STANDBY L H STANDBY H L MUTE L L PLAY Turn ON/OFF Sequences (for optimizing the POP performances) Figure. USING ONLY THE MUTE FUNCTION (V) STBY pin#9 (V) VSVR pin#7(v) 2.V MUTE pin#0 (V) INPUT (mv) VOUT (V) IQ (ma) OFF STBY MUTE PLAY MUTE STBY OFF D97AU684 USING ONLY THE MUTE FUNCTION To semplify the application, the standby pin can be connected directly to Ground. During the ON/OFF transitions is recommended to respect the following conditions: At the turnon the transition mute to mute play must be made when the SVR pin is higher than 2.V At the turnoff the TDA7496 must be brought to mute from the play condition when the SVR pin is higher than 2.V. /
6 Figure 2. P.C.B. and Component layoutpcb and Component Layout Figure 3. 6/
7 Figure 4. Quiescent Current vs. Supply Voltage Figure 7. Output DC Offset vs. Supply Voltage Iq (ma) Vi=0 D03AU Supply Voltage (V) VodcVsvr D03AU496 (V) 280 Vi= Supply Voltage (V) Figure. Output Dc Offset vs. Supply Voltage Figure 8. Output Power vs Supply Voltage Vodc D03AU49 (V) 6 Vi= Supply Voltage (V) Output Power (W) Rl=4Ω F=KHz THD=0% THD=% D03AU Supply Voltage (V) Figure 6. Output Power vs. Supply Voltage Figure 9. Distortion vs Output Power Output Power (W) D03AU497 Rl=8Ω 8 F=KHz 7 THD=0% THD=% Supply Voltage (V) Distortion (%) 0. Vs=22V Rl=8Ω F=KHz F=KHz D03AU Output Power (W) 7/
8 Figure 0. Distortion vs Output Power Figure 3. Mute Attenuation vs Vpin 0 Distortion (%) D03AU00 Mute Attenuation (db) D03AU F=KHz F=KHz Vs=2V Rl=4Ω Rl=8Ω Pout=W Output Power (W) Vpin # 0 (V) Figure. Closed Loop Gain vs. Frequency PINS DESCRIPTION Closed loop Gain (db) 30 D03AU0 Figure 4. PIN SVR Rl=8Ω Pout=0.W Cin=470nF Cout=000µF Csvr=470µF Frequency (KHz) SVR 20K 20K 6K 6K K K OUT L OUT R 00µA Figure 2. StBy Attenuation vs Vpin 9 D97AU8A Stby Attenuation (db) Rl=8Ω Pout=W D03AU Vpin # 9 (V) Figure. PINS: INL,INR INn SVR 00µA 6K D97AU89 8/
9 Figure 7. PIN STBY Figure 20. PINS: VAROUTL VAROUTR 0µA STBY 200 VAROUTL 6K D97AU94 D97AU90 Figure 8. PIN: MUTE Figure 2. PIN: MUTE 200 0K 0µA 0µA D97AU92 VOL Figure 9. PINS: OUT R, OUT L D97AU9 Figure 22. PINS: PWGND, SGND OUT GND D97AU93 D97AU88 9/
10 DIM. mm inch MIN. TYP. MAX. MIN. TYP. MAX. A 0.97 B C D E F G G H H L L L L L L M M S S Dia OUTLINE AND MECHANICAL DATA Multiwatt V 0/
11 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners 2003 STMicroelectronics All rights reserved STMicroelectronics GROUP OF COMPANIES Australia Belgium Brazil Canada China Czech Republic Finland France Germany Hong Kong India Israel Italy Japan Malaysia Malta Morocco Singapore Spain Sweden Switzerland United Kingdom United States /
TDA2822 DUAL POWER AMPLIFIER SUPPLY VOLTAGE DOWN TO 3 V LOW CROSSOVER DISTORSION LOW QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION
TDA2822 DUAL POER AMPLIFIER SUPPLY VOLTAGE DON TO 3 V. LO CROSSOVER DISTORSION LO QUIESCENT CURRENT BRIDGE OR STEREO CONFIGURATION DESCRIPTION The TDA2822 is a monolithic integrated circuit in 12+2+2 powerdip,
More informationTDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER
20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power
More informationADJUSTABLE VOLTAGE AND CURRENT REGULATOR
L200 ADJUSTABLE VOLTAGE AND CURRENT REGULATOR ADJUSTABLE OUTPUT CURRENT UP TO 2 A (GUARANTEED UP TO Tj = 150 C) ADJUSTABLE OUTPUT VOLTAGE DOWN TO 2.85 V INPUT OVERVOLTAGE PROTECTION (UP TO 60 V, 10 ms)
More informationL4940 series VERY LOW DROP 1.5 A REGULATORS
L4940 series VERY LOW DROP 1.5 A REGULATORS PRECISE 5 V, 8.5 V, 10 V, 12 V OUTPUTS LOW DROPOUT VOLTAGE (500 typ at 1.5A) VERY LOW QUIESCENT CURRENT THERMAL SHUTDOWN SHORT CIRCUIT PROTECTION REVERSE POLARITY
More informationTDA2004R. 10 + 10 W stereo amplifier for car radio. Features. Description
10 + 10 W stereo amplifier for car radio Features Low distortion Low noise Protection against: Output AC short circuit to ground Overrating chip temperature Load dump voltage surge Fortuitous open ground
More informationLF00AB/C SERIES VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT
LF00AB/C SERIES ERY LOW DROP OLTAGE REGULATORS WITH INHIBIT ERY LOW DROPOUT OLTAGE (5) ERY LOW QUIESCENT CURRENT (TYP. 50 µa IN OFF MODE, 500µA INON MODE) OUTPUT CURRENT UP TO 500 ma LOGIC-CONTROLLED ELECTRONIC
More informationObsolete Product(s) - Obsolete Product(s)
32 W hi-fi audio power amplifier Features High output power (50 W music power IEC 268.3 rules) High operating supply voltage (50 V) Single or split supply operations Very low distortion Short-circuit protection
More informationTDA7448 6 CHANNEL VOLUME CONTROLLER 1 FEATURES 2 DESCRIPTION. Figure 1. Package
6 CHANNEL CONTROLLER FEATURES 6 CHANNEL INPUTS 6 CHANNEL OUTPUTS ATTENUATION RANGE OF 0 TO -79dB CONTROL IN.0dB STEPS 6 CHANNEL INDEPENDENT CONTROL ALL FUNCTION ARE PROGRAMMABLE VIA SERIAL BUS DESCRIPTION
More information100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY THERMAL SHUTDOWN STBY-GND
TDA7294 100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY VERY HIGH OPERATING VOLTAGE RANGE (±40V) DMOS POWER STAGE HIGH OUTPUT POWER (UP TO 100W MU- SIC POWER) MUTING/STAND-BY FUNCTIONS NO SWITCH ON/OFF
More informationLM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER
LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% EXCELLENT FREQUENCY STABILITY ESD PROTECTION 2kV DESCRIPTION
More informationTDA2003 10W CAR RADIO AUDIO AMPLIFIER
TDA2003 10W CAR RADIO AUDIO AMPLIFIER DESCRIPTION The TDA 2003 has improved performance with the same pin configuration as the TDA 2002. The additional features of TDA 2002, very low number of external
More information100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY THERMAL SHUTDOWN STBY-GND
TDA7294 100V - 100W DMOS AUDIO AMPLIFIER WITH MUTE/ST-BY VERY HIGH OPERATING VOLTAGE RANGE (±40V) DMOS POWER STAGE HIGH OUTPUT POWER (UP TO 100W MU- SIC POWER) MUTING/STAND-BY FUNCTIONS NO SWITCH ON/OFF
More informationSymbol Parameter Value Unit V i-o Input-output Differential Voltage 40 V I O Output Current Intenrally Limited Top
LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE : 1.2 TO 37V OUTPUT CURRENT IN EXCESS OF 1.5A 0.1% LINE AND LOAD REGULATION FLOATING OPERATION FOR HIGH VOLTAGES COMPLETE SERIES OF PROTECTIONS
More informationTDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER
20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power
More informationL78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
More information.OPERATING SUPPLY VOLTAGE UP TO 46 V
L298 DUAL FULL-BRIDGE DRIVER.OPERATING SUPPLY VOLTAGE UP TO 46 V TOTAL DC CURRENT UP TO 4 A. LOW SATURATION VOLTAGE OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY)
More informationL78M00 SERIES POSITIVE VOLTAGE REGULATORS. www.tvsat.com.pl
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT TO 0.5A OUTPUT VOLTAGES OF 5; 6; 8; 9; 10; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSISTOR SOA PROTECTION DESCRIPTION
More informationCLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION OUT CFLY + CFLY - BOOT VREG FEEDCAP FREQ. July 2001 1/8
CLASS-D VERTICAL DEFLECTION AMPLIFIER FOR TV AND MONITOR APPLICATION FEATURES PRELIMINARY DATA HIGH EFFICIENCY POWER AMPLIFIER NO HEATSINK SPLIT SUPPLY INTERNAL FLYBACK GENERATOR OUTPUT CURRENT UP TO.5
More informationTDA7318D DIGITAL CONTROLLED STEREO AUDIO PROCESSOR
TDA738 DIGITAL CONTROLLED STEREO AUDIO PROCESSOR INPUT MULTIPLEXER: - 4 STEREO INPUTS - SELECTABLE INPUT GAIN FOR OPTIMAL ADAPTION TO DIFFERENT SOURCES INPUT AND OUTPUT FOR EXTERNAL EQUALIZER OR NOISE
More informationDescription. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
More informationTL074 TL074A - TL074B
A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION
More informationTDA7560 4 X 45W QUAD BRIDGE CAR RADIO AMPLIFIER PLUS HSD. 1 Features SUPERIOR OUTPUT POWER CAPABILITY: 2 Description. Figure 1.
4 X 45 QUAD BRIDGE CAR RADIO AMPLIFIER PLUS HSD 1 Features SUPERIOR OUTPUT POER CAPABILITY: 4 x /4Ω MAX. 4 x 45/4Ω EIAJ 4 x /4Ω @ 14.4V, 1KHz, % 4 x /2Ω MAX. 4 x 77/2Ω EIAJ 4 x 55/2Ω @ 14.4V, 1KHz, % MULTIPOER
More informationMC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS
MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz
More informationLM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
More informationSTP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET
N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED
More informationDescription. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection
More informationL293B L293E PUSH-PULL FOUR CHANNEL DRIVERS. OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY
L293B L293E PUSH-PULL FOUR CHANNEL DRIVERS OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY. HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE
More informationTDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
More informationUA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)
General-purpose single operational amplifier Datasheet - production data N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connections (top view) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting
More informationHCF4081B QUAD 2 INPUT AND GATE
QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25
More informationMC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
More informationDescription. Table 1. Device summary. Order code Package Packing
4 x 41 W quad bridge car radio amplifier Datasheet - production data Features Flexiwatt25 High output power capability: 4 x 41 W / 4 max. Low distortion Low output noise Standby function Mute function
More informationSTGW40NC60V N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT
N-CHANNEL 50A - 600V - TO-247 Very Fast PowerMESH IGBT Table 1: General Features STGW40NC60V 600 V < 2.5 V 50 A HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION UP TO 50 KHz LOSSES INCLUDE DIODE RECOVERY
More informationULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
More informationSG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
More informationTDA7850. 4 x 50 W MOSFET quad bridge power amplifier. Features. Description. Protections:
4 x 50 W MOSFET quad bridge power amplifier Features High output power capability: 4 x 50 W/4 max. 4 x 30 W/4 @ 14.4 V, 1 khz, % 4 x 80 W/2 max. 4 x 55 W/2 @ 14.4V, 1 khz, % MOSFET output power stage Excellent
More informationHCF4056B BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION
BCD TO 7 SEGMENT DECODER /DRIVER WITH STROBED LATCH FUNCTION QUIESCENT CURRENT SPECIF. UP TO 20V OPERATION OF LIQUID CRYSTALS WITH CMOS CIRCUITS PROVIDES ULTRA LOW POWER DISPLAY. EQUIVALENT AC OUTPUT DRIVE
More informationHCF4070B QUAD EXCLUSIVE OR GATE
QUAD EXCLUSIE OR GATE MEDIUM-SPEED OPERATION t PHL = t PLH = 70ns (Typ.) at CL = 50 pf and DD = 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA
More informationTL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
More informationDIGITAL CONTROLLED STEREO AUDIO PROCESSOR WITH LOUDNESS. 100nF Recout(L) VOLUME + LOUDNESS VOLUME + LOUDNESS TDA7309 SUPPLY MUTE 12 AGND.
DIGITAL CONTROLLED STEREO AUDIO PROCESSOR WITH LOUDNESS 1 FEATURES INPUT MULTIPLEXER: 3 STEREO INPUTS RECORD OUTPUT FUNCTION LOUDNESS FUNCTION VOLUME CONTROL IN 1dB STEPS INDEPENDENT LEFT AND RIGHT VOLUME
More informationL297 STEPPER MOTOR CONTROLLERS
L297 STEPPER MOTOR CONTROLLERS NORMAL/WAVE DRIVE HALF/FULL STEP MODES CLOCKWISE/ANTICLOCKWISE DIRECTION SWITCHMODE LOAD CURRENT REGULA- TION PROGRAMMABLE LOAD CURRENT FEW EXTERNAL COMPONENTS RESET INPUT
More informationDescription SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
More informationHCF4001B QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V
More informationSTW20NM50 N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET
N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET TYPE V DSS (@Tjmax) R DS(on) I D STW20NM50 550V < 0.25Ω 20 A TYPICAL R DS (on) = 0.20Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED
More informationLM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
More informationHCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
More informationSTP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V
More informationMC34063AB, MC34063AC, MC34063EB, MC34063EC
MC34063AB, MC34063AC, MC34063EB, MC34063EC DC-DC converter control circuits Description Datasheet - production data Features DIP-8 SO-8 Output switch current in excess of 1.5 A 2 % reference accuracy Low
More informationL6234. Three phase motor driver. Features. Description
Three phase motor driver Features Supply voltage from 7 to 52 V 5 A peak current R DSon 0.3 Ω typ. value at 25 C Cross conduction protection TTL compatible driver Operating frequency up to 150 khz Thermal
More informationL4970A 10A SWITCHING REGULATOR
10A SWITCHING REGULATOR 10A OUTPUT CURRENT 5.1 TO 40 OUTPUT OLTAGE RANGE 0 TO 90% DUTY CYCLE RANGE INTERNAL FEED-FORWARD LINE REGULA- TION INTERNAL CURRENT LIMITING PRECISE 5.1 ± 2% ON CHIP REFERENCE RESET
More informationSWITCH-MODE POWER SUPPLY CONTROLLER PULSE OUTPUT DC OUTPUT GROUND EXTERNAL FUNCTION SIMULATION ZERO CROSSING INPUT CONTROL EXTERNAL FUNCTION
SWITCH-MODE POWER SUPPLY CONTROLLER. LOW START-UP CURRENT. DIRECT CONTROL OF SWITCHING TRAN- SISTOR. COLLECTOR CURRENT PROPORTIONAL TO BASE-CURRENT INPUT REERSE-GOING LINEAR OERLOAD CHARACTERISTIC CURE
More informationTDA7375V. 2 x 35W dual/quad power amplifier for car radio 1 FEATURES 2 PROTECTIONS: Figure 1. Package
2 x 35W dual/quad power amplifier for car radio 1 FEATURES HIGH OUTPUT POWER CAPABILITY: 2 x 40W max./4 2 x 35W/4 EIAJ 2 x 35W/4 EIAJ 2 x 25W/4 @14.4V, 1KHz, 10% 4 x 7W/4 @14.4V,1KHz, 10% 4 x 12W/2 @14.4V,
More informationSTW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET
N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY
More informationBD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor
Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with
More informationBD135 - BD136 BD139 - BD140
BD135 - BD136 BD139 - BD140 Complementary low voltage transistor Features Products are pre-selected in DC current gain Application General purpose Description These epitaxial planar transistors are mounted
More informationSymbol Parameter Value Unit V DS Drain-source Voltage (V GS =0) 50 V V DGR Drain- gate Voltage (R GS =20kΩ) 50 V
BUZ71A N - CHANNEL 50V - 0.1Ω - 13A TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ71A 50 V < 0.12 Ω 13 A TYPICAL RDS(on) = 0.1 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
More information2STBN15D100. Low voltage NPN power Darlington transistor. Features. Application. Description
Low voltage NPN power Darlington transistor Features Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode TAB Application Linear
More informationBD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
More informationunit : mm With heat sink (see Pd Ta characteristics)
Ordering number: EN1321E Monolithic Linear IC LA4261 3.5 W 2-Channel AF Power Amplifier for Home Stereos and Music Centers Features. Minimum number of external parts required (No input capacitor, bootstrap
More informationSTCS1. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3x3 mm)
More informationL7800 SERIES POSITIVE VOLTAGE REGULATORS
SERIES POSITIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5 A OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9; 12; 15; 18; 24V THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION OUTPUT TRANSITION SOA PROTECTION
More informationTDA8174A TDA8174AW VERTICAL DEFLECTION CIRCUIT RAMP GENERATOR INDEPENDENT AMPLITUDE ADJUSTEMENT BUFFER STAGE POWER AMPLIFIER
TDA87A TDA87AW VERTICAL DEFLECTION CIRCUIT RAMP INDEPENDENT AMPLITUDE ADJUSTEMENT BUFFER STAGE POWER AMPLIFIER. FLYBACK THERMAL PROTECTION INTERNAL REFERENCE VOLTAGE DECOU- PLING MULTIWATT (Plastic Package)
More informationSTP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET
STP10NK60Z/FP, STB10NK60Z/-1 STW10NK60Z N-CHANNEL 600V-0.65Ω-10A TO-220/FP/D 2 PAK/I 2 PAK/TO-247 Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP10NK60Z STP10NK60ZFP STB10NK60Z STB10NK60Z-1
More informationBUX48/48A BUV48A/V48AFI
BUX48/48A BU48A/48AFI HIGH POWER NPN SILICON TRANSISTORS STMicroelectronics PREFERRED SALESTYPES NPN TRANSISTOR HIGH OLTAGE CAPABILITY HIGH CURRENT CAPABILITY FAST SWITCHING SPEED APPLICATIONS SWITCH MODE
More informationTDA7565. Quad power amplifier with integrated step-up converter. Features. Description
Quad power amplifier with integrated step-up converter Features Multipower BCD technology DMOS power output Non-switching high efficiency amplifier Switching high efficiency voltage converter High output
More informationSTP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET
STP6NK60Z - STP6NK60ZFP STB6NK60Z - STB6NK60Z-1 N-CHANNEL 600V - 1Ω - 6A TO-220/TO-220FP/D 2 PAK/I 2 PAK Zener-Protected SuperMESH Power MOSFET TYPE V DSS R DS(on) I D Pw STP6NK60Z STP6NK60ZFP STB6NK60Z
More informationTDA7293HS. 120-volt, 100-watt, DMOS audio amplifier with mute and standby. Features. Description
120-volt, 100-watt, DMOS audio amplifier with mute and standby Features Multipower BCD technology Very high operating voltage range (±50 V) DMOS power stage High output power (100 W into 8 Ω @ THD =10%,
More informationUNISONIC TECHNOLOGIES CO.,LTD
TDA UNISONIC TECHNOLOGIES CO.,LTD +W STEREO AMPLIFIER FOR CAR RADIO DESCRIPTION The UTC TDA is a class B dual audio power amplifier and is designed for car radio applications. HZIP-11 FEATURES * Low distortion.
More informationDescription. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
More informationSTCS1A. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3 x 3
More informationObsolete Product(s) - Obsolete Product(s)
Vertical deflection booster for 3 App TV/monitor applications with 0 V flyback generator Features Figure. Heptawatt package Power amplifier Flyback generator Stand-by control Output current up to 3.0 App
More informationOrder code Temperature range Package Packaging
ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. 2N3055, MJ2955 Complementary power transistors Features Datasheet - production
More informationSymbol Parameter Value Unit IAR Avalanche Current, Repetitive or Not-Repetitive
BUZ11 N - CHANNEL 50V - 0.03Ω - 30A -TO-220 STripFET POWER MOSFET TYPE V DSS R DS(on) I D BUZ11 50 V < 0.04 Ω 30 A TYPICAL R DS(on) = 0.03 Ω AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED HIGH CURRENT
More informationULN2001, ULN2002 ULN2003, ULN2004
ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet production data Features Seven Darlingtons per package Output current 500 ma per driver (600 ma peak) Output voltage 50 V Integrated suppression
More informationDDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
More informationVNP5N07 "OMNIFET": FULLY AUTOPROTECTED POWER MOSFET
"OMNIFET": FULLY AUTOPROTECTED POWER MOSFET TYPE Vclamp RDS(on) Ilim VNP5N07 70 V 0.2 Ω 5 A LINEAR CURRENT LIMITATION THERMAL SHUT DOWN SHORT CIRCUIT PROTECTION INTEGRATED CLAMP LOW CURRENT DRAWN FROM
More informationIRF740 N-CHANNEL 400V - 0.46Ω - 10A TO-220 PowerMESH II MOSFET
N-CHANNEL 400V - 0.46Ω - 10A TO-220 PowerMESH II MOSFET TYPE V DSS R DS(on) I D IRF740 400 V < 0.55 Ω 10 A TYPICAL R DS (on) = 0.46Ω EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED LOW GATE CHARGE VERY
More informationDATA SHEET. TDA8560Q 2 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility INTEGRATED CIRCUITS. 1996 Jan 08
INTEGRATED CIRCUITS DATA SHEET power amplifier with diagnostic facility Supersedes data of March 1994 File under Integrated Circuits, IC01 1996 Jan 08 FEATURES Requires very few external components High
More informationST13005. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Datasheet production data Features Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
More informationETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
More informationHCF4028B BCD TO DECIMAL DECODER
BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION
More informationTDA2030A. 18W Hi-Fi AMPLIFIER AND 35W DRIVER
TDA2030A 18W Hi-Fi AMPLIFIER AND 35W DRIVER DESCRIPTION The TDA2030A is a monolithic IC in Pentawatt package intended for use as low frequency class AB amplifier. With VS max = 44V it is particularly suited
More informationObsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PROGRAMMABLE 4-BIT BINARY COUNTER WITH ASYNCHRONOUS CLEAR INTERNAL LOOK-AHEAD FOR FAST COUNTING CARRY OUTPUT FOR CASCADING SYNCHRONOUSLY PROGRAMMABLE LOW-POWER TTL COMPATIBILITY STANDARDIZED
More informationSTB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP
STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP N-channel 600 V - 1.76 Ω - 4 A SuperMESH Power MOSFET DPAK - D 2 PAK - IPAK - I 2 PAK - TO-220 - TO-220FP Features Type V DSS R DS(on)
More informationSTGB10NB37LZ STGP10NB37LZ
STGB10NB37LZ STGP10NB37LZ 10 A - 410 V internally clamped IGBT Features Low threshold voltage Low on-voltage drop Low gate charge TAB TAB High current capability High voltage clamping feature Applications
More informationBTB04-600SL STANDARD 4A TRIAC MAIN FEATURES
BTB-6SL STANDARD A TRIAC MAIN FEATURES A Symbol Value Unit I T(RMS) A V DRM /V RRM 6 V I GT(Q) ma G A A DESCRIPTION The BTB-6SL quadrants TRIAC is intended for general purpose applications where high surge
More informationPAM8403. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
FILTERLESS 3W CLASS-D STEREO AUDIO AMPLIFIER Description Pin Assignments The is a 3W, class-d audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless
More informationSTP60NF06. N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06 60V
More informationST202 5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS
5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS SUPPLY VOLTAGE RANGE: 4.5 TO 5.5V SUPPLY CURRENT NO LOAD (TYP): 1.5mA TRASMITTER OUTPUT VOLTAGE SWING (TYP): ± 9V TRANSITION SLEW RATE (TYP.): 12V/µs
More informationSTCS2A. 2 A max constant current LED driver. Features. Applications. Description
2 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 2 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic Slope control with
More informationVN03. ISO high side smart power solid state relay PENTAWATT. Features. Description. www.tvsat.com.pl
ISO high side smart power solid state relay Features Type V DSS R DS(on) I n (1) Maximum continuous output current (a) : 4A @ Tc= 25 C 5V logic level compatible input Thermal shutdown Under voltage protection
More informationTable 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
More informationSTP60NF06FP. N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06FP 60V
More informationAN820 APPLICATION NOTE INPUT/OUTPUT PROTECTION FOR AUTOMOTIVE COMPUTER
AN820 APPLICATION NOTE INPUT/OUTPUT PROTECTION FOR AUTOMOTIE COMPUTER INTRODUCTION In cars, the number of functions carried out by electronic components has greatly increased during the last 10 years.
More informationTSV6290, TSV6290A, TSV6291, TSV6291A
Micropower with high merit factor CMOS operational amplifiers Features Low supply voltage: 1.5 V 5.5 V Rail-to-rail input and output Low input offset voltage: 800 µv max (A version) Low power consumption:
More informationLM1036 Dual DC Operated Tone/Volume/Balance Circuit
LM1036 Dual DC Operated Tone/Volume/Balance Circuit General Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems.
More informationLM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
More informationDSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
More informationVN05N. High side smart power solid state relay PENTAWATT. Features. Description
High side smart power solid state relay Features Type V DSS R DS(on) I OUT V CC VN05N 60 V 0.18 Ω 13 A 26 V Output current (continuous): 13A @ Tc=25 C 5V logic level compatible input Thermal shutdown Under
More information