2013/2014. Measuring instruments and systems. precision measuring instruments mechanical - optical - electronical
|
|
- Polly Hudson
- 7 years ago
- Views:
Transcription
1 2013/2014 instruments and systems precision measuring instruments mechanical - optical - electronical
2 GENERAL CATALOG instruments and systems SOMET CZ s.r.o. Teplicka Bílina Czech republic Tel: Fax: C00.201*.Somet
3 CONTENTS Precision Systems Table of contents category page 1 Calipers / Depth calipers and micrometers Micrometers / Micrometer heads Internal micrometers / Internal & external measuring instruments Dial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system 5 Stands / Bench centers / Surface plates V-blocks / Vises / Angle plates / Cylindrical squares Squares / Parallels / Straight edges 7 Protractors / Clinometers / Spirit levels Gauge blocks / balls / Optical flats and plan parallel optical flats / Feeler gauges / Roughness specimens 9 Gauges / Pin gauges / Thread and tolerance tables Magnifiers / Microscopes / Glass rulers Stereo microscopes / Video microscopes / Endoscopes 11 Graduated rulers / Scale units / Circumference tapes Precision tapes / Distance meters 12 Scribing tools / Compasses / Center squares Height and scribing gauges 13 Hardness testers / (Coating) thickness gauges / (Infrared) thermometers Tachometers / Dynamometers / Inspection instruments 14 instrument displays and interfaces Index C00.205*.Somet
4 Calipers / Depth calipers and micrometers Accuracy of calipers according DIN 862 Maximum permissible errors (µm) length l vernier / dial reading digital () 0.1 / C02.001*.Somet
5 CALIPERS Precision Systems Absolute digital calipers Calipers with an absolute measuring system. This gives you the advantage that the caliper stores the one-time setting of the absolute zero position until the battery has to be changed. This reduces the chance of measuring errors and enables you to use the caliper without zero setting. range: Resolution: /inch conversion. ABS/INC switchable. Digit height: 11. On/off switch. Max. measuring speed: 1.5 m/s. Power supply: 1 battery type V range/ Jaw length Thumb wheel yes yes yes Option: Spare battery Digital calipers with excellent price-performance ratio range: Resolution: /inch conversion. Digit height: measuring range 100 : 7, measuring range 150 : 11. On/off switch. Reset. Power supply: 1 battery type V357. range/ Jaw length Left-handed model: Option: Spare battery Thumb wheel no no yes yes yes yes C Somet
6 CALIPERS Absolute digital calipers The advantage of these calipers is the one-time setting of the absolute zero position until the battery has to be changed. This reduces the chance of measuring errors and enables you to use the calipers without zero setting. range: Resolution: /inch conversion. ABS/INC switchable. Digit height: 10. On/off switch. Reset. Max. measuring speed: 1.5 m/s. DIN 862. Delivery with an inspection report. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Digital calipers The advantage of these calipers is the one-time setting of the absolute zero position until the battery has to be changed. This reduces the chance of measuring errors and enables you to use the calipers without zero setting. range: Resolution: /inch conversion. Digit height: 10. On/reset switch. Max. measuring speed: 1.5 m/s. DIN 862. Delivery with an inspection report. Power supply: 1 battery type V range/ Jaw length Option: Spare battery C Somet
7 CALIPERS Precision Systems Digital calipers with glass ruler Equipped with a glass ruler. Very easy displacement by non-contact movement. range: Resolution: /inch conversion. ABS/INC switchable (only /444/445). Digit height: 12. On/reset switch. Automatic switch-off. DIN 862. Delivery with an inspection report. Power supply: 1 battery type CR range/ Jaw length Absolute calipers: Options: Spare battery USB interface Foot switch USB interface: For data transfer to PC (e.g. Excel, Word). Operating system: Windows 2000/XP/Vista/7. PC connection: USB data output (cable length 2 m). No software or driver to install. Foot switch (optional) C Somet
8 CALIPERS Digital calipers with hold function Digital calipers with a function to hold the display value at any position. range: Resolution: /inch conversion. Digit height: 11. On/off switch. Reset. Hold function. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Digital calipers with min/max function By keeping the mode button pressed you can hold the minimum and maximum measuring values. range: Resolution: /inch conversion. Digit height: 11. On/off switch. Reset. Min/max function. Power supply: 1 battery type V range/ Jaw length Option: Spare battery C Somet
9 CALIPERS Precision Systems Digital calipers Calipers with a higher resolution and a measuring range up to 300. range: Resolution: /inch conversion. ABS/INC switchable. On/off switch. Max. measuring speed: 1.5 m/s. Flat depth rod. DIN 862. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Digital solar calipers The solar power supply functions already with a low illumination level. range: Resolution: /inch conversion. Thumb wheel (except ). Flat depth rod. Back-up power supply (prevents shut-down in dark places): 1 battery type V range/ Jaw length Option: Spare battery C Somet
10 CALIPERS Digital calipers IP54 These calipers have a protection degree of IP54 and are therefore protected against splash water and resistant to oil and dust. Zero setting at any position. Equipped with thumb wheel and locking screw. range: Resolution: /inch conversion. On/off switch. Reset. Max. measuring speed: 1.5 m/s. Thumb wheel and locking screw. Flat depth rod. Protection: IP54. Resistant to workshop conditions. Delivery in a case. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Digital calipers IP67 These IP67 protected calipers are especially suitable for use in production environments: they are fully protected against dust intrusion and even last temporary iersion. range: Resolution: /inch conversion. Automatic switch-off. Reset. Locking screw. Flat depth rod. Protection: IP67. Power supply: 1 battery type CR range/ Jaw length Option: Spare battery C Somet
11 CALIPERS Precision Systems Digital calipers IP67 These IP67 protected calipers are especially suitable for use in production environments: they are fully protected against dust intrusion and even lasts temporary iersion. range: Resolution: /inch conversion. Large, easy to read LCD display. On/reset switch. Automatic switch-off. Thumb wheel and locking screw. Stable flat depth rod. Protected rack. Protection: IP67. DIN 862. Delivery with an inspection report. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Digital carbon fiber caliper Digital caliper made of carbon fiber. range: Resolution: 0.1. Accuracy: ± 0.2. /inch conversion. On/off switch. Automatic switch-off. Reset. Flat depth rod. Power supply: 1 battery type CR2032. range/ Jaw length Option: Spare battery C Somet
12 CALIPERS Digital calipers with slidable measuring jaw For measuring distances between planes at different levels. Very suitable as scribing tool! range: Resolution: H3 /inch conversion. On/off switch. Reset. H1 Power supply: 1 battery type V357. H range/ Jaw length/ H1 H2 H * Option: Spare battery * Model with absolute digital display. Digital calipers for measuring center distances Suited for measuring center distances between bores from ø 1 up to 4.5. Because both measuring jaws are adjustable in height it is possible to measure center distances between bores that are positioned at different levels. range: Resolution: /inch conversion. On/off switch. Reset. Power supply: 1 battery type V range/ ø Option: Spare battery C Somet
13 CALIPERS Precision Systems Digital calipers with pointed measuring jaws The pointed measuring jaws of these calipers enable you to measure distances in places that are hard to reach. range: Resolution: /inch conversion. On/off switch. Reset. ϕ2 Power supply: battery type V357. C B ϕ1 range/ Jaw length C/ Length B/ Angle ϕ1 Angle ϕ Option: Spare battery Digital calipers with outside angled measuring jaws These calipers have short, stable, V shaped measuring jaws with a flat front. Specially designed for measuring bore and internal groove diameters. range: Resolution: /inch conversion. On/off switch. Preset at 10 (delivery incl. setting ring). Preset through SET, + and switches. Thickness measuring face: 0.5. Power supply: 1 battery type V range/ Length/ A B C Option: Spare battery C Somet
14 CALIPERS Digital calipers with outside angled measuring pins These calipers are equipped with outside angled rounded pins. range: Resolution: /inch conversion. On/off switch. Reset. Power supply: 1 battery type V357. C L ø range/ Jaw length C/ Pin ø/ Pin length L/ * Option: Spare battery * Model with absolute digital display. Digital calipers with inside angled measuring pins These calipers are equipped with inside angled rounded pins. range: Resolution: /inch conversion. On/reset switch. Power supply: 1 battery type V357. C L range/ Jaw length C/ Pin ø/ Pin length L/ * Option: Spare battery * Model with absolute digital display. C Somet
15 CALIPERS Precision Systems Digital calipers with outside angled measuring jaws These calipers are equipped with outside angled V shaped measuring jaws. range: Resolution: /inch conversion. On/off switch. Reset. Power supply: 1 battery type V range/ Jaw length C/ face B/ Jaw length L/ * Option: Spare battery * Model with absolute digital display. Digital calipers with inside angled measuring jaws These calipers are equipped with inside angled V shaped measuring jaws. range: Resolution: /inch conversion. On/off switch. Reset. Power supply: 1 battery type V357. range/ Jaw length C/ face B/ Jaw length L/ * Option: Spare battery * Model with absolute digital display. 14 C Somet
16 CALIPERS Digital calipers for internal length measurement Calipers with outside angled, pointed measuring jaws for the measurement of for example internal grooves. range: range/ Resolution: /inch conversion On/reset switch. Option: Power supply: 1 battery type V Spare battery Digital caliper for groove measurements range: Resolution: /inch conversion. On/off switch. Reset. Also suitable for: internal diameter attached collar, internal diameter U shaped flange on axis, center distances blind holes under-surface flange on axis, hole diameter hard-to-reach places, height measurement, groove width and groove distance Equipped with small measuring jaws on top of the caliper. Power supply: 1 battery type V357. range/ Option: Spare battery C Somet
17 CALIPERS Precision Systems Digital calipers with pointed anvil Because of the pointed anvil and the long measuring jaws you can measure with these calipers all sorts of wall thicknesses in places that are hard to reach and of for example round surfaces. range: Resolution: /inch conversion. On/off switch. Reset. Power supply: 1 battery type V357. range/ Option: Spare battery Digital caliper with square, pointed anvil Because of the pointed anvil and the long measuring jaws you can measure with this caliper all sorts of wall thicknesses in places that are hard to reach and of for example round surfaces. range: Resolution: /inch conversion. Digit height: 10. On/off switch. Reset. Anvil: height 1, width 0.5. face: height 6, width 3. Power supply: 1 battery type V357. range/ Length/ A B C Option: Spare battery C Somet
18 CALIPERS Digital calipers with prismatic anvil Digital calipers with prismatic anvil for measuring objects with an uneven number of grooves like cutters, reamers and drills. The angle of the prism aperture is designed for workpieces having a number of 3 or 5 flutes. range: Resolution: Accuracy: ± /inch conversion. On/off switch. Reset through SET switch. Max. measuring speed: 1.5 m/s. Including setting gauge ø 4 ( ) or ø 1 ( ). Power supply: 1 battery type V357. Also analog models available. For workpieces with range/ flutes flutes 1-40 Option: Spare battery Digital gear tooth thickness calipers The vertical slider sets the height (H) from the top of the tooth to the pitch line. Subsequently, the horizontal slider measures the tooth thickness (G) at the pitch line. range: module Resolution: /inch conversion. On/off switch. Reset. Hardened stainless steel construction. Tungsten carbide measuring faces. Conforms to factory standard. Power supply: 2 batteries type V Module Option: Spare battery (2 needed) C Somet
19 CALIPERS Precision Systems Absolute digital workshop calipers range: Resolution: /inch conversion. ABS/INC switchable. On/off switch. Reset. Preset (except /686/708). Memory for measuring values when the display is switched off. Fine adjustment. Rounded jaw ends for internal measurements. Power supply: 1 battery type V With measuring knives I II range Length J1 J2 K Without measuring knives range Description Spare battery Length J1 K Meas. knives for internal measurements (I): Meas. knives for external measurements (II): C Somet
20 CALIPERS Digital lightweight carbon workshop calipers Large digital lightweight carbon workshop calipers equipped with rounded stainless steel sliders and hardened steel measuring jaws with IP65 protection. Resistant to workshop conditions. range: , internal measurements from 20. Resolution: /inch conversion. Opto-RS232C data output. Two reference memories (REF I and REF II). On/off switch. Reset/preset. Hold function. Min/max function. Tolerance function. Fine adjustment. Hardened steel measuring jaws. With measuring knives. Protection: IP65 (except for the RS232C data output). Conforms to factory standard. Delivery in a case with an inspection report. Power supply: 1 battery type CR2032. Available up to measuring range Also available with special jaw lengths range/ Accuracy/ Jaw length/ Weight/kg ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± Options: Spare battery Opto-RS232C cable 9p (2 m) * Support for slidable measuring jaw * Support for fixed measuring jaw * One is required of each support. C Somet
21 CALIPERS Precision Systems Universal digital calipers Large calipers, with a data output and exchangeable measuring inserts for special purposes (optionally available). All inserts with M2.5 thread can be used with this caliper. Please see the dial indicator accessories section for these inserts. Internal measuring range: External measuring range: Resolution: /inch conversion. ABS/INC switchable. Opto-RS232C data output. On/off switch. Reset/preset. Hold function. Interchangeable measuring inserts (not included). Locking screw. Stainless steel construction. DIN 862. Delivery in a case. Power supply: 1 battery type CR2032. range/ internal external Options: Spare battery Opto-RS232C cable 9p (2 m) Jaw length Weight kg Inserts examples. For more information see the dial indicator accessories section. d /432 3,2 d C Somet
22 CALIPERS Universal digital calipers Large universal digital calipers made of stainless steel for internal and external measurements. In combination with these universal calipers many inserts are available e.g. for measuring thread. See accessories universal digital calipers. By intake with M2.5 thread very many inserts can be used. Please see the dial indicator accessories section for these inserts. Universal digital calipers Internal measuring range: External measuring range: Resolution: Accuracy: ± 0.02 or ± /inch conversion. Opto-RS232C data output. On/off switch. Reset/preset. Interchangeable measuring inserts. Many extensions and inserts available. Protection: IP65. Conforms to factory standard. Delivery in a case with two inserts, two insert holders and a measuring report. Power supply: 1 battery type CR2032. Also models with spring system available range/ internal external ± ± ± ± Options: Spare battery Opto-RS232C cable 9p (2 m) Accuracy 1 Inserts and insert holders standard included. 2 Inserts and insert holders standard included. Jaw length Universal digital calipers with dial indicator Internal measuring range: External measuring range: Resolution: Dial indicator: measuring range: 0-5, graduation: /inch conversion. Opto-RS232C data output. On/off switch. Reset/preset. Interchangeable measuring inserts. Fine adjustment and locking screw. Protection: IP65. Conforms to factory standard. Delivery in a case with a dial indicator, a removable bridge, two inserts ø 3, two insert holders and a measuring report. Power supply: 1 battery type CR2032. C Somet
23 CALIPER ACCESSORIES Precision Systems Universal digital calipers with dial indicator (continued) range/ internal external Accuracy Jaw length Holder bar length/ ± ± ± Options: Spare battery Opto-RS232C cable 9p (2 m) Universal digital calipers accessories Inserts for thread measurements, per pair Pitch Internal meas.: External meas.: Insert holders (M2.5), per piece Length C/ Inserts (M2.5), per pair Diameter A/ Length B/ Steel: Tungsten carbide: Various inserts, per piece Description Cylindrical Spherical Double diameter Disc Flat Conical 60 Knife-edged 60 Cylindrical Flat Disc Disc Disc C Somet
24 CALIPERS Dial calipers Stainless steel dial calipers with protected rack. range: Graduation: 0.01 or pointer revolution = 1 or 2. Rotatable dial. Thumb wheel. DIN 862. range/ Graduation 0.02, 1 revolution = 2 : Graduation 0.01, 1 revolution = 1 : High-quality plastic calipers from Switzerland These modern designed Swiss calipers are made of fiberglass re-enforced plastic, which makes them very firm and light, wear-proof, and resistant to all kinds of chemicals ideal for the workshop! Each model is equipped with an easy read-out. Combined with the low price a line of very attractive calipers. For 100 pieces or more the calipers and folding rules are available with prints. This gives you the opportunity to promote your company name or logo in an easy way and is within your own company, as well when used as a business gift, an outstanding marker. For more information about the printing possibilities please contact our sales department. range: Accuracy: ± ( L) (L in ). Thumb wheel. Delivery in a case Vernier caliper Vernier: 0.1 / 1/64 inch. The scale lightens up with minimal light. Dial caliper Graduation: pointer revolution = 10. Rotatable dial, ø 32. The dial is shockproof and can be set to zero. Digital caliper Resolution: /inch conversion. On/reset switch. Off switch. Power supply: 1 battery type V : set with folding rule of 1 m Description Vernier caliper Dial caliper Set of dial caliper with a folding rule of 1 m Digital caliper Option: Spare battery C Somet
25 CALIPERS Precision Systems Calipers Hardened stainless steel calipers with no-glare chrome finished scale and vernier. range: Vernier: 0.05 or Raised sliders. Locking screw or spring release. Flat depth rod. Thread table on the back side. DIN 862. Delivery in a case range/ Vernier Jaw length Locking screw on top: Locking screw on top: Spring release: Spring release, left-handed model: C Somet
26 CALIPERS Workshop calipers Hardened stainless steel workshop calipers with no-glare chrome finished scale and vernier. range: Vernier: Raised sliders (except ). Fine adjustment. With measuring knives or rounded jaw ends for internal measurements. Locking screws. DIN 862. Delivery in a case range Internal measurements from/ Jaw length With measuring knives for internal measurements: With rounded jaw ends for internal measurements: Workshop calipers with extended jaw lengths Hardened stainless steel workshop calipers with no-glare chrome finished scale and vernier. range: Vernier: 0.05 / 1/128 inch. Raised sliders. With or without fine adjustment. knives for external measurements. Rounded jaw ends for internal measurements from 10. DIN 862. Delivery in a case range/ Jaw length Fine adjustment yes no C Somet
27 CALIPERS Precision Systems Workshop calipers Large and solid, stainless steel calipers with no glare chrome finished scale and vernier. range: Vernier: 0.02 / 1/1000 inch or 0.05 / 1/128 inch. Fine adjustment. With or without measuring knives for internal or external measurements. Rounded jaw ends for internal measurements; measuring range 600 : K = 10, measuring range > 600 : K = 20. DIN 862. Delivery in a case. I II Vernier 0.05 / 1/128 inch range Length J1 J2 K Without measuring knives: Meas. knives for internal measurements (I): Meas. knives for external measurements (II): Vernier 0.02 / 1/1000 inch range Length J1 J2 K Without measuring knives: Meas. knives for internal measurements (I): Meas. knives for external measurements (II): C Somet
28 CALIPERS Workshop calipers Large and solid, stainless steel calipers with no glare chrome finished scale and vernier. The calipers with a measuring range up to 300 have a /inch graduation, those with a measuring range of 400 and more only have a metric graduation. range: Vernier: 0.05 / 1/128 inch. Rounded jaw ends for internal measurements. With or without fine adjustment. With or without measuring knives for external measurements. DIN 862. Delivery with an inspection report. Case available on request Without measuring knives With meas. knives for external measurements range/ Jaw length range/ Jaw length Without fine adjustment: Without fine adjustment: With fine adjustment: With fine adjustment: C Somet
29 CALIPERS Precision Systems Digital calipers for internal measurements Calipers with long measuring jaws for internal measurements. range: Resolution: /inch conversion. ABS/INC switchable. On/off switch. Preset (only /827/829). Reset. Memory for measuring values when the display is switched off. Fine adjustment. Delivery with an inspection report. Power supply: 1 battery type V range/ Jaw length Option: Spare battery Brake disc calipers Brake disc calipers especially for measuring the groove depth of brake discs. range: Locking screw. Vernier: 0.1. Stainless steel construction range/ Jaw length C Somet
30 CALIPER ACCESSORIES Probe set for calipers This probe set enlarges the possibilities of a regular caliper. Probe holders are slid on the measuring jaw of the caliper. The different probes can be screwed onto them. The probe set makes it possible to execute measurements which are not possible with a regular caliper, such as measuring internal grooves and center distances. Maximum jaw thickness: 3.2. Delivery in a wooden case. ø 6 > 16 > 4 10 > 20 > > 22 > 0 3, 4, 5 Disc probes for internal measurements. 6 Conical probes (9 ) for measuring center distances of two equal holes. 7 Conical probes (12.5 ) for measuring center distances of two equal holes. The set consists of: right probe holder, left probe holder, pair of disc probes ø 6, pair of disc probes ø 10, pair of disc probes ø 12.5, pair of cone probes ø 9, 60, pair of cone probes ø 12.5, 60, pair of cylindrical probes ø 1.5 x 9, hexagon key. Description Probe set for calipers Horizontally positioned cylindrical probes for measuring internal grooves > Vertically positioned cylindrical probes. C Somet
31 CALIPER ACCESSORIES Precision Systems Caliper inspection set For checking the accuracy of DIN 862 calipers. The set consists of three special steel gauge blocks (30, 41.3 and 131.4, ISO 3650 class 1), two steel setting rings (ø 4 and ø 25 ) and a pair of gloves. Description Caliper inspection set Depth measuring base for calipers Universal depth measuring base for stable and accurate depth measurements. Suitable for most of the calipers with a depth rod and a measuring range up to 200. For more information please contact our sales department. face l x w/ x 6 Depth measuring bases for calipers Universal depth measuring bases for stable and accurate depth measurements. Suitable for most of the calipers with a depth rod and a measuring range up to 200. For more information please contact our sales department face l x w/ Height h/ x x 8 24 C Somet
32 CALIPER ACCESSORIES Soft cases for calipers Protect calipers during transport and storage. For regular shaped calipers (analog, digital and dial type). Made of synthetic leather. For meas. range/ Digital protractor Compact digital protractor to attach to a caliper or height gauge. range: 180. Resolution: 0.01 or 1'. Accuracy: ± 5'. Digimatic data output. On/off switch. Automatic switch-off (adjustable). Preset or hold function. Reset. Reversible measuring direction. Weight: 160 g. Delivery in a case including assembly key, mounting bracket (clamping shaft 9 x 9 ) and clamping screw for height gauge. Power supply: 2 batteries type AAA. Description Digital protractor Options: Spare battery (2 needed) Digimatic cable, 1 m Digimatic cable, 2 m instruments set Caliper 0-150, vernier Micrometer 0-25, graduation Precision square 100 x 70. Ruler Adjustment tool. Description Meas. instruments set C Somet
33 DEPTH CALIPERS Precision Systems Depth calipers range: Analog: vernier 0.02, digital: resolution With or without hook. Analog Stainless steel construction. No-glare chrome finished scale and vernier. Digital /inch conversion. On and off switches. Reset. Power supply: 1 battery type V Analog Digital range/ Base length/ range/ Base length/ Without hook: With hook: Without hook: With hook: Option: Spare battery C Somet
34 DEPTH CALIPERS Depth calipers Depth calipers with or without hook. range: Vernier: No-glare chrome finished scale and vernier. Stainless steel construction. DIN 862. Larger measuring ranges available on request range/ Base length/ Type I Without hook: With hook (type I): Type II With hook (type II): C Somet
35 DEPTH CALIPERS Precision Systems Depth calipers Depth calipers with or without hook. The models with a hook have graduations on both sides of the scale, allowing reversed usage (i.e. without hook) of the instrument. range: Vernier: No-glare chrome finished vernier. DIN 862. Length (l) and width (w) of the hook at a scale cross-section of 8 x 3 : 12 x 5, 12 x 4 : 16 x 10, 20 x 5 : 54 x l w Stainless steel, no-glare chrome finished scale Special steel Meas. range Base length Crosssection scale/ Without hook: x x x x x 5 With hook: x x 4 Meas. range Base length Crosssection scale/ Without hook: x x x x x x 5 With hook: x x x x x x 5 C Somet
36 DEPTH CALIPERS Depth calipers Waterproof, hardened stainless steel depth calipers, in different versions of the beam s measuring face. Suited for use with removable bridges. range: Resolution: Accuracy: ± 0.03 or ± On/off switch. Automatic switch-off. Reset/preset. Hold function. Locking screw. Protection: IP67. Standard supplied with insert Conforms to factory standard. Delivery in a case with an inspection report. Power supply: 1 battery type CR2032. Removable bridges Length/ range/ Accuracy Options: Spare battery Inserts Description Insert Insert Insert Insert Insert Insert Insert C Somet
37 DEPTH GAUGES Precision Systems Digital depth gauge range: Resolution: /inch conversion. On/off switch. Reset. face: 45 x 6. pin: 6 x 2, taper to 4 x 2. Power supply: 1 battery type V357. Depth calipers for keyway depths range: keyway depths Application range: cylinders ø Vernier: Stainless steel construction. Application range/ ø ø ø ø range/ Option: Spare battery Depth gauge with dial range: Graduation: 0.1. face: 60 x 25. pin: ø 3. Käfer depth dial indicators range: Graduation: pin shaft: ø 2. depth with pin : 200. Excl. measuring pin and measuring base. Accuracy according DIN 878 ( ) or factory standard ( ). range/ range/ Options: pin ø 2 Meas. base 63 x 17 Meas. base x 17 * * Larger sizes available on request. C Somet
38 DEPTH MICROMETERS Digital depth micrometers Digital depth micrometers with interchangeable, spherical rods, because of which beveled and hollow surfaces can be measured very accurately. The high accuracy of the rods makes resetting after exchanging the rods unnecessary. Two models with different base lengths available. range: Resolution: /inch conversion. ABS/INC switchable. Automatic switch-off. Preset. rods: ø 4.5. Locking screw. DIN 863 T2. Power supply: 1 battery type V range/ Accuracy/ Number of rods Base 63 : ± ± ± ± ± ± Base : ± ± ± ± ± ± Option: Spare battery C Somet
39 DEPTH MICROMETERS Precision Systems Depth micrometers Depth micrometers with interchangeable, spherical or flat rods. With the flat rods mainly flat and spherical surfaces can be measured very accurately. The spherical rods are especially suitable for beveled and hollow surfaces. The high accuracy of the rods makes recalibration after exchanging the rods unnecessary. Two models with different base lengths available. range: Graduation: rods: ø 4.5. Locking screw. DIN 863 T Model with spherical rods especially for hollow and beveled surfaces range/ Accuracy Number of rods Base 63 : Base : ± ± ± ± ± ± Model with flat rods especially for flat and spherical surfaces range/ Accuracy Number of rods Base 63 : Base : ± ± ± ± ± ± C Somet
40 Micrometers / Micrometer heads Accuracy of micrometers according DIN 863 Max. permissible range () errors (µm) C03.001*.Somet
41 MICROMETERS Precision Systems Digital micrometers Rugged digital micrometers with simple functions and an excellent price-performance ratio. range: Resolution: Automatic switch-off. Reset/preset. Tungsten carbide measuring faces: ø 6.5. DIN 863 T1. From measuring range including setting gauge. Power supply: 1 battery type V range/ Accuracy Not switchable: ± ± ± ± ± ± ± ± Sets range/ Pieces Not switchable: Switchable /inch and ABS/INC: ± ± ± ± ± ± ± ± Switchable /inch and ABS/INC: Option Description Spare battery C Somet
42 MICROMETERS Digital micrometers IP54 Rugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and a favourable price-performance ratio. range: Resolution: /inch conversion. ABS/INC switchable. On/off switch. Automatic switch-off. Reset/preset (from : only reset). Tungsten carbide measuring faces: ø 6.5. Protection: IP54. DIN 863 T1. From measuring range including setting gauge. Power supply: 1 battery type V range/ Accuracy ± ± ± ± ± ± ± ± Option: Spare battery Sets range/ Pieces C Somet
43 MICROMETERS Precision Systems Digital micrometers IP54 with double measuring force Rugged digital micrometers with an IP54 protection degree (resistant to dust and splash water) and a favourable price-performance ratio. These micrometers have a very intuitive operation because every function has its own button. Furthermore these micrometers are equipped with a double measuring force. The small thimble produces a measuring force of approximately 5 N and the large thimble produces a measuring force of approximately 10 N. range: Resolution: /inch conversion. ABS/INC switchable. LCD display with function indication. Automatic switch-off. Reset/preset. Tungsten carbide measuring faces: ø 6.5. Protection: IP54. DIN 863 T1. From measuring range including setting gauge. Power supply: 1 battery type V range/ Accuracy ± ± ± ± ± ± ± ± Option: Spare battery Sets range/ Pieces C Somet
44 MICROMETERS Digital micrometers IP54 with double display This patented micrometer distinguishes itself by its the two large displays on both sides of the instrument, which can also display upside-down. Therefore the measuring value can always be presented upright, which enables ergonomic read-out at all times. Add to this its measuring range of 30, the tungsten carbide measuring faces, the IP54 protection degree and then check out its price. range: Resolution: /inch conversion. ABS/INC switchable. Double LCD display. Second display can be switched on/off separately. Automatic switch-off. Reset/preset. Tungsten carbide measuring faces. Protection: IP54. DIN 863 T1. Delivery in a case. From measuring range including setting gauge. Power supply: 1 battery type CR Second display: also for left-handed use. range/ Accuracy ± ± ± ± ± ± ± ± Option: Spare battery value upside-down. C Somet
45 MICROMETERS Precision Systems Digital micrometers IP65 These digital micrometers have an IP65 classification and are therefore not only resistant to dust but can also withstand water jets. Also available as fast adjustable micrometers with a pitch of 2. range: /inch conversion. ABS/INC switchable. On/off switch. Automatic switch-off. Tungsten carbide measuring faces. Protection: IP65. Power supply: 1 battery type V357. Fast adjustable micrometers 1 revolution of the thimble = Fast adjustable micrometers range/ Accuracy range/ Accuracy ± ± ± ± Option: Spare battery ± ± ± ± C Somet
46 MICROMETERS Digital micrometers with tolerance indication These absolute digital micrometers are provided with both a tolerance and a hold function. They also have a large display. range: Resolution: /inch conversion. ABS/INC switchable. Digit height: 9. Automatic switch-off. Reset/preset. Hold function. Adjustable tolerance limits. Tungsten carbide measuring faces: ø 6.5. DIN 863 T1. Power supply: 1 battery type V range/ Accuracy ± ± ± ± Option: Spare battery Micrometers with counter These solid micrometers have a counter with a resolution of for an error free read-out of the measuring value, and a very favourable price-performance ratio. range: Resolution: Friction thimble. Numerical counter adjustable. Tungsten carbide measuring faces. Delivery with adjustment tool. From measuring range including setting gauge range/ Accuracy Sets (delivered incl. setting gauges) range/ Pieces ± ± ± ± ± ± ± ± C Somet
47 MICROMETERS Precision Systems Micrometers range: Graduation: Friction thimble. Tungsten carbide measuring faces: ø 6.5. DIN 863 T1. From measuring range including setting gauge range/ Accuracy ± ± ± ± ± ± ± ± ± ± ± ± Model for left- and right-handed use: ± ± ± ± Double graduation: for left- and right-handed use. Sets range/ C Somet
48 MICROMETERS Mini-micrometer range: Graduation: Without friction thimble. Dimensions: total length: 70, throat depth: 14. range/ Micrometer with an extra large measuring range The measuring range of this micrometer can be switched from to 0-25 by easy mounting of the prolonged anvil. range: Graduation: Accuracy: ± Tungsten carbide measuring faces. Delivery incl. adjustment tool and prolonged anvil. range/ Accuracy ± C Somet
49 MICROMETERS Precision Systems Micrometers 0.001, parallax-free Rugged micrometers with a vernier graduation of and a favourable price performance ratio. range: Vernier: 0.001, parallax-free by enlarged thimble. Friction thimble. Tungsten carbide measuring faces: ø 6.5. DIN 863 T1. Delivery incl. adjustment tool. From measuring range including setting gauge. range/ Accuracy ± ± ± ± ± ± ± ± Fast adjustable micrometers Fast adjustable micrometers because one revolution results in a displacement of 1. The measuring value can be read directly from the 100 step graduation on the thimble. range: Graduation: revolution of the thimble = 1. Thimble with 100 step graduation. Tungsten carbide measuring faces: ø 8. DIN 863 T1. From measuring range including setting gauge. range/ Accuracy ± ± ± ± ± ± ± ± C Somet
50 MICROMETERS Micrometers with a large measuring range The varnished tubular frame is very stable and equipped with heat insulating grips. With two spacers for a large measuring span. range: span: : 100 (travel 25, spacers 25 and 50 ), : 200 (travel 50, spacers 50 and 100 ). Graduation: Rotating spindle. Tungsten carbide measuring faces: ø 8. No-glare chrome finished thimble. DIN 863 T3. With two setting gauges. range/ Accuracy span 100 : ± ± ± ± ± ± ± span 200 : ± ± ± ± ± Delivery ex Groningen, Netherlands C Somet
NOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More information3 3.4 Measuring tapes Spirit levels Levelling and laser technology
0 Vernier callipers Depth gauges 1 Outside and inside micrometers 2 Dial gauges / callipers Vblocks, measuring tables Centring devices Page 526 540 Page 541 554 Page 555 577 Height gauges, scribers Engineers
More information1722 / 1723 / 1724 DIGI-MET Indicators
1722 / 172 / 1724 DIGI-MET Indicators for static measurements IP 52 1722 502 172 502 1724 502 Electronic functions Housing Ø 60 mm Replacement probe tip M 2.5 Protection class IP52 Clamping shank Ø 8 mm
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationDMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationMitutoyo General Catalog
Mitutoyo General Catalog Micrometer List of products Move to other products Digimatic Micrometer SERIES 293 Quickmike SERIES 293, 369, 422 Digimatic Micrometers SERIES 293 1 2 SPC Caliper 3 4 Depth gage
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationDIGI-MET ELECTRONIC INDICATORS
DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface
More informationStraightness, Angle and Inclination Measurement
www.tesagroup.com J-1 INCLINOMETERS AND PRECISION LEVELS Irrespective of whether they are spirit or electronic inclinometers, all precision levels are based on the same perfectly reliable reference but
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationMEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationTEC APO140. This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy.
140 manuals 2013_110 manuals 1/13/2013 10:40 PM Page 1 TEC APO140 This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy. OWNER S MANUAL 2013 140
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More informationPenetration. www.koehlerinstrument.com. www.koehlerinstrument.com. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationVERZUS 750CCD Universal Hardness Tester
VERZUS 750CCD Universal Hardness Tester UNIVERSAL HARDNESS TESTERS VERZUS 750CCD Microscope with high resolution CCD camera Industrial 8.4 LCD touch screen for easy tester operation, showing the force
More informationMEASURING TOOLS AND TECHNIQUES
CHAPTER 2 MEASURING TOOLS AND TECHNIQUES When performing maintenance and repair tasks on catapults and arresting gear equipment, you must take accurate measurements during inspection, to determine the
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationProfile Projector PH-3500
Optical Measuring Profile Projector PH-3500 Catalog No. E4155-172 Mitutoyo introduces the PH-3515F a series of profile projectors that will meet any optical measuring or inspection challenge your shop
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationCoolant Proof Micrometer QuantuMike
Small Tool Instruments and Data Management Coolant Proof Micrometer QuantuMike Pioneering design, means taking the lead Bulletin No. 1930 Rapid measurement is achieved thanks to 2 mm* of spindle feed for
More informationMechanical and electronic length measuring instruments for internal and external measurements
echanical and electronic length measuring instruments for internal and external measurements Precision and continuity Features Contents ver since its foundation in 1883 Kroeplin have been involved in development
More informationEasy Machining Center Setup
White Paper Document No. MWA-072-EN_01_1404 April 2014 Easy Machining Center Setup Using FANUC s Direct Input of Workpiece Origin Setting Measured and Tool Length Measurement features to easily establish
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationCYMAQ Marking System AS200 + DS7050 N-14
CYMAQ Marking System AS200 + DS7050 N-14 Serial Number: 13716 CYMAQ www.cymaq.com INDEX 1. PRESENTATION AND GENERAL POINTS 1.1. General Points 1.2. Identification plate 2. MACHINE CHARACTERISTICS 2.1.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 7 Contact: Mr S C Sparks Solent Industrial Estate Tel: +44 (0)1489 790296 Hedge End Fax: +44 (0)1489 790294 Southampton E-Mail: info@southcal.co.uk
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationSHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH
D505 D525 SHAFT ALIGNMENT Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE COMPENSATION THERMAL GROWTH TOLERANCE CHECK MEASUREMENT VALUE FILTER 40 MINIMUM ROTATION FOR ALL
More informationVCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
More informationLength, Finland, MIKES (VTT Technical Research Centre of Finland Ltd, Centre for Metrology / Mittatekniikan keskus)
absolute mise en pratigue: mise en pratigue: absolute absolute Level or Range 633 633 nm 0.04 fm 2 95% No 1 474 474 THz 24 khz 2 95% No 1 532 532 nm 0.08 fm 2 95% No 50 563 563 THz 0.08 MHz 2 95% No 51
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationTube Control Measurement, Sorting Modular System for Glass Tube
Tube Control Measurement, Sorting Modular System for Glass Tube Tube Control is a modular designed system of settled instruments and modules. It comprises measuring instruments for the tube dimensions,
More informationMEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE
MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationDiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
More informationRETROFITTING THE X3 MILLING MACHINE (2)
RETROFITTING THE X3 MILLING MACHINE (2) Dick Stephen continues with the mechanical modifications. Fitting the ball screws The 12mm 2mm pitch supplied by THK ball screws are delivered with the nut fitted
More informationVALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME2304 ENGINEERING METROLOGY AND MEASUREMENT
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME2304 ENGINEERING METROLOGY AND MEASUREMENT QUESTION BANK UNIT I CONCEPT OF MEASUREMENT 1. What are the uses
More informationBe careful not to scratch or hit front edge of the side viewing micro prisms onto hard objects!
Instructions Manual Flexia BGA Inspection Systems This manual describes how to use Flexia BGA Inspection System Optilia Instruments 1 AB Contents 1. Safety and maintenance Instructions 3 2. About Flexia
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO- compatible documentation of the results are becoming the major factors for small and
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationMilling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationCommon Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationIntroduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
More informationUNIT 5 LINEAR MEASURING DEVICES AND COMPARATORS
UNIT 5 LINEAR MEASURING DEVICES AND COMPARATORS Linear Measuring Devices and Comparators Structure 5.1 Introduction Objectives 5.2 Non-precision Measuring Instruments 5.3 Precision Measuring Instruments
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationMilling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
More informationLED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationSUPERYACHT SPARES. Nozzles and portable monitors. www.superyachtspares.com / info@superyachtspares.com / +31 183 639193
Nozzles and portable monitors Rosenbauer - Nozzles and portable monitors EN Maximum extinguishing effect. Minimal water consumption. The Rosenbauer nozzle enables the manual adjustment of the water flow
More informationAccess and Object Testing Probes
MP-Series Access and Object Testing Probes to verify the degree of protection against accidental contact in accordance with VDE resp. DIN EN, IEC, UL and further safety standards. Access probes to verify
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationThe word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationPrecision Measuring Tools. Participant Self-Paced Workbook
Precision Measuring Tools Participant Self-Paced Workbook Introduction Course Purpose The purpose of this course is to introduce you to precision measuring tools. In this course you will learn about decimals
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationPORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES
British Made Portable Microscopes with Image Erection PCB Through - Hole Scope Depthscope Brinell Hardness Impression Microscope Cathode Ray Tube Inspector Portable Video Scope Metallurgical Microscope
More informationSCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationPowerLine Magnetic-Laser Sheave Alignment System Instructions
PowerLine Magnetic-Laser Sheave Alignment System Instructions The PowerLine Magnetic-Laser Sheave Alignment System laser aligns belts, pulleys, sheaves, sprockets, gear trains, rollers, platforms, conveyors,
More informationPenetration. www.koehlerinstrument.com. www.koehlerinstrument.com. www.labomat.eu. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationHand-held marking system FlyMarker mini
Hand-held marking system FlyMarker mini ergonomics Due to the well-conceived economics, the marking device sits perfectly in the hand and an effortless operation is possible, also in vertical work positions.
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationMarStand. Indicator Stands Comparator Stands
MarStand. Indicator Stands Comparator Stands Indicator Stand 815 GN 6 2 Indicator Stand 2400 6 2 Indicator Stand 815 MA 6 3 Indicator Stand 815 MB 6 3 Indicator Stand 815 MG 6 4 Indicator Stand 815 P 6
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationTUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2
Part #: HT-2 1965-82 CORVETTE O-RING CONVERSION REAR CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More information