TA Instruments What s New in TRIOS Software
|
|
- Wesley McKenzie
- 7 years ago
- Views:
Transcription
1 TA Instruments What s New in TRIOS Software What s New in TRIOS Software V3.1 Refer to the What s New in TRIOS Software V3.1 document. What s New in TRIOS Software V3.0 Refer to the What s New in TRIOS Software V3.0 document. What s New in TRIOS Software V2.6.2 Miscellaneous Fixes and Enhancements Rheology TTS fix for split signals ARES-G2/RSA-G2 fix for limited users conducting firmware upgrade ARES-G2 firmware update Revision AP. What s New in TRIOS Software V2.6.1 Miscellaneous Fixes and Enhancements DHR: Fixed problems with Control panel locking up after setting the gap or running a test Issued October 2014 Page 1 of 16
2 What s New in TRIOS Software V2.6 New Product Support Electrorheology (ER) Accessory Support for the Discovery Hybrid Rheometers: ER option for testing ER fluids in an AC/DC electrical field in both oscillation and steady shear test modes. The ER option can test materials in parallel plate and concentric cylinder geometries. ARES-G2 Double Wall Ring (DWR) for Interfacial Rheology: Interfacial option for measuring the interfacial shear properties at liquid-liquid or liquid-gas interfaces using the double wall ring geometry. Page 2 of 16
3 Disposable plates for DHR Dielectric Accessory: Used for curing thermosetting materials under various temperature profile while measuring dielectric and mechanical properties simultaneously. Partitioned Cone-Plate for ARES-G2: A geometry consisting of a plate and a ring for measuring high viscous elastic fluids such as polymer melts at high strain and strain rates while reducing the effect of secondary flows and sample fracturing. The partitioned plate can be paired with a plate or a cone. Page 3 of 16
4 Miscellaneous Fixes and Enhancements General TRIOS File > Open dialog: Preview and thumbnail support of last displayed graph in Windows Explorer File > Open dialog. NOTE: Files must have been previously saved in TRIOS V2.6. Procedure naming improvement: A procedure can now be named while it is set up in an experiment. If you save a procedure and change the filename when you save it, you will receive a warning that the filename is different from your procedure name and you will be able to verify that they match. Graph X-Y values: In addition to the tool tip that appears when you hover the cursor over a point, when you click on a point, the value will appear on the Status Bar to the left of the clock. Once a point has been selected, the cursor keys can be used to move back and forth along the curve. Page 4 of 16
5 Graph axis fonts: All axis variable fonts are linked and can be changed at the same time using font size setting on the Graph >Format tab. The tick mark label fonts are also linked and can be changed in the same way. Format font size also works for title, annotations, analysis, and any combination of selected text. Graph context menu: Draw removed and Show legend added Derivative: Moved from Graph > Edit to Graph > Analysis tab Discovery Hybrid Rheometer New instrument firmware New procedure step: Conditioning Electrorheology (available when accessory is installed) Zero gap by axial force added as an option Transient data collection added to standard controlled stress oscillation Global axial force conditions are now recorded in results file and can be viewed in the Parameters list Page 5 of 16
6 ARES-G2 New instrument firmware: WinCE - NK.bin WinCe - NKLX.bin AresG2 DSP - AresG2hb.ldr RsaG2 DSP - RsaG2hb.ldr Enhanced Arbitrary Wave test procedure: The Arbitrary Waveshape test now allows the definition of the strain and temperature history by supplying one or more equations for strain and a temperature profile as a function of time. Up to four individual equations (defining a zone), each with a specified duration, can be used in one step. The temperature profile consists of up to four isothermal or ramp zones. Page 6 of 16
7 End of Test (EOT) Conditioning step: The End of Test (EOT) conditioning step is now available for the ARES-G2. The EOT defines the instruments settings for environmental system, transducer, motor and stage control after the procedure is completed. Note that the end of test condition step is a passive step and sets the conditions when the test is terminated, either normally, or by the user or the instrument. If you want the end of test conditions applied even if the test is terminated prematurely, the EOT conditioning block should be placed at the beginning of the procedure. If it is desired to change the EOT conditions based on when the procedure is terminated, more than one EOT can be used in a procedure. The position within the procedure in reference to the step when the procedure is terminated defines the EOT conditions that are applied. With the addition of this new step, the End of Test Options that were previously accessed from the TRIOS Options menu have been removed. Other enhancements and fixes: Trim gap implemented for cones Temperature ramps for fluid bath repaired Discovery DSC Minor bug fixes Discovery TGA Minor bug fixes Page 7 of 16
8 Analysis Added Best Fit option to model list for flow curves. Two labels are generated: one with R 2 values for all the applicable models, and one complete analysis for the one with the best value. TTS improvements: TTS Wizard: Once suitable data has been loaded and graphed, the TTS ribbon becomes active. The Wizard steps you through the procedure to generate a Master Curve. Curves can be added and removed after starting a TTS session The Master Curve temperature is now included as part of the step name and can now be created at any chosen temperature using the WLF or Arrhenius model to shift the data. Page 8 of 16
9 What s New in TRIOS Software V2.5.2 Miscellaneous Fixes and Enhancements Thermal Discovery: Updated to stabilize Discovery thermal instruments and reduce incidents of USBrelated interruptions Fixed bugs with Instrument (DSC and TGA) time synchronization with TRIOS Fixed the blank screen with a cursor issue on the common cabinet. Smoother TGA furnace motion at the up position Auto sampler communication issues improved significantly Fixed the TGA tare status stuck and weight calibration stuck issues What s New in TRIOS Software V2.5.1 Miscellaneous Fixes and Enhancements DHR: Updated embedded code V9.14 Rheology Procedures: Fixed issues saving images with procedures Graph: Addressed issue with copying of the graph File Importer: Added missing Orchestrator file importer (.TAD and RSD) Thermal Discovery: Fixed issue where the sample name would be cleared if a procedure template was selected after entering the sample name once the experiment starting running Page 9 of 16
10 What s New in TRIOS Software V2.5 Feature Enhancements Dielectric Accessory Support for Discovery Hybrid Rheometers TRIOS V2.5 includes support for the new Dielectric Accessory for Discovery Hybrid Rheometers. Page 10 of 16
11 Miscellaneous Fixes and Enhancements General TRIOS Thermal: History View now supported on a 64-bit PC with 32-bit Office installed File Manager: Added button to collapse and expand documents within the File Manager Data Representation and Analysis Time Temperature Superpositioning (TTS) Enhancements Temperature displayed to only one decimal place in legend Removed original file name from the default session name Graph axis values displayed as 1, 10, 100 rather than 0, 1, 2 Support for dielectric data Removed restriction on using specific variables Graph settings and variables may now be changed during a TTS session Added reference curve temperature to the master curve step name Added *** to legend text for the reference curve Colors and symbols no longer change when starting TTS session Modulus crossover model enhanced to search for multiple crossovers points Default graph font settings updated to a larger font size Page 11 of 16
12 Export and Copy: Option added to export at a fixed size (previous option, WYSIWYG, remains) Discovery Hybrid Rheometer Instrument Control Updated DHR firmware V9.13 to support Dielectric Accessory Procedure setup Time can be entered in seconds or hh:mm:ss format and is set from the Display window in TRIOS Options Save Waveform option is enabled by default for Oscillation test types Flow Sweep: Steady State Sensing parameters modified to be consistent with ARES-G2 implementation Zero Gap: For DHR and AR-G2, the zero gap routine has been changed to remove the extra step of positioning the geometries close together Image (Camera) collection and display: Repaired bug on all operating systems Page 12 of 16
13 Environmental control panel Removed DISABLE function and incorporated with IDLE function Added status of Environmental system ARES-G2 and RSA-G2 Instrument Control Updated ARES/RSA firmware Updated versions: ARES-G2/RSA-G2 V ARES DSP/RSA DSP V Power V12.807, LinCodr/Keypad V12.716, Motor PRT , Xducer PRT , FCO Phase Fire V Experiment is aborted if LN2 or purge gas supply run out during active experiment Static IP addressing for the instrument is supported Procedure setup Save Waveform option is enabled by default for Oscillation test types Time can be entered in seconds or hh:mm:ss format and is set from the Display window in TRIOS Options Real Time Panel - Time/Points remaining: For time based procedure steps, the time remaining is shown in the control panel. For the other procedure step types the points remaining is shown. Temperature Ramp Iso Strain Test: Stage now correctly moves to compensate for the geometry expansion when selected RSA: Minimum sample thickness for tension and fibre clamps reduced Page 13 of 16
14 When connecting to an ARES/RSA: The data from the instrument is no longer loaded by default if the instrument is idle. You can manually load by selecting the data from the File Manager. Image (Camera) collection and display: Repaired bug on all operating systems Discovery DSC Instrument Control Updated Discovery DSC firmware V NOTE: The firmware upgrade process takes more time (approximately 10 minutes) for this release and will reboot the instrument multiple times. TRIOS will display the progress and close when the process is complete. Instrument notifications messages were improved and clarified Enhanced robustness of Table View for run sequence creation Touch Screen A confirmation message is posted when Go to Next Segment is initiated from the Run Details view Purge gas changes for GDM (gas delivery module) made for better handling of error and zero flow conditions Improved communication between TRIOS and instrument Page 14 of 16
15 Discovery TGA Instrument Control Updated Discovery TGA firmware V NOTE: The firmware upgrade process takes more time (approximately 10 minutes) for this release and will reboot the instrument multiple times. TRIOS will display the progress and close when the process is complete. Instrument notifications messages were improved and clarified Touch Screen: When selecting only the Verification option for Weight Calibration, the calibration is no longer performed as well Heat Exchanger changes: Automatically turns on at start of experiment and turns off upon completion of the post test condition If an experiment is manually stopped, the heat exchanger will remain on until 50 C Whenever the evolved gas heater is enabled, the heat exchanger will be on Purge gas changes for GDM (gas delivery module) made for better handling of error and zero flow conditions Improved communication between TRIOS and instrument Page 15 of 16
16 TA Instruments Offices For information on our latest products, contact information, and more, see our web site at: TA Instruments Waters LLC Corporate Headquarters 159 Lukens Drive New Castle, DE USA Telephone: Fax: Page 16 of 16
Additional Requirements for ARES-G2 / RSA-G2. One Ethernet 10 Base T/100 Base TX network card required for communication with the instrument.
TA Instruments TRIOS Software Installation Instructions Installation Requirements Your TRIOS Instrument Control software includes all the components necessary to install or update the TRIOS software, as
More informationINTRODUCTORY GUIDE TO USING AN AR SERIES RHEOMETER USING RHEOLOGY ADVANTAGE SOFTWARE* (VERSIONS 4.1)
INTRODUCTORY GUIDE TO USING AN AR SERIES RHEOMETER USING RHEOLOGY ADVANTAGE SOFTWARE* (VERSIONS 4.1) Fred Mazzeo, Ph.D. TA Instruments, 109 Lukens Drive, New Castle, DE 19720, USA 1. Turn on the computer
More informationDiscovery Hybrid Rheometer
Discovery Hybrid Rheometer New Castle, DE USA Lindon, UT USA Hüllhorst, Germany Shanghai, China Beijing, China Tokyo, Japan Seoul, South Korea Taipei, Taiwan Bangalore, India Sydney, Australia Guangzhou,
More informationACU-1000 Manual Addendum Replacement of CPM-2 with CPM-4
ACU-1000 Manual Addendum Replacement of CPM-2 with CPM-4 1 PURPOSE:... 1 2 CPM-4/CPM-2 COMPATIBILITY... 2 2.1 NETWORK CABLES... 2 2.2 FACTORY DEFAULT SETTINGS... 2 2.3 CHANGING THE RS-232 SERIAL PORT BAUD
More informationHydras 3 LT Quick Start
Catalog Number 6234218 Hydras 3 LT Quick Start SOFTWARE MANUAL December 2005, Edition 2 Hach Company, 2005. All rights reserved. Printed in the U.S.A. Catalog Number 6234218 Hydras 3 LT SOFTWARE MANUAL
More informationUpgrade Instructions. View Manager 96 v. 5.1. Software Upgrade
WORLD LEADER IN ELECTRONIC SECURITY Upgrade Instructions View Manager 96 v. 5.1 1 Software Upgrade This software permits you to upgrade your VM96 version 3.x or 4.x system to the latest version of VM96
More informationIntroduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1
Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1 In this tutorial, we will use the SolidWorks Simulation finite element analysis (FEA) program to analyze the response
More informationExcel 2007 Basic knowledge
Ribbon menu The Ribbon menu system with tabs for various Excel commands. This Ribbon system replaces the traditional menus used with Excel 2003. Above the Ribbon in the upper-left corner is the Microsoft
More information138 Configuration Wizards
9 Configuration Wizards 9.1 Introduction to Wizards ACP ThinManager uses wizards for configuration. Wizards take two forms. List Wizards associate Terminal Servers and ThinManager Servers with their IP
More informationNew Features in Advantage Q Series
New Features in Advantage Q Series Supplement to Getting Started Guide Revision T Issued August 2011 Notice 2002 2011 by TA Instruments Waters LLC 159 Lukens Drive New Castle, DE 19720 The material contained
More informationHTML Code Generator V 1.0 For Simatic IT Modules CP 443-1 IT, 343-1 IT, 243-1 IT
HTML Code Generator V 1.0 For Simatic IT Modules CP 443-1 IT, 343-1 IT, 243-1 IT Manual This manual and program are freeware. Every user can use, copy or forward this program and documentation FREE OF
More informationIDDERO HOME SERVER. Quick start guide. www.iddero.com 150302-02
IDDERO HOME SERVER Quick start guide www.iddero.com 150302-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 IDDERO CONFIGURATION SOFTWARE... 3 2.1 Installation and First Steps...3 3 IDDERO HOME SERVER CONFIGURATION...
More informationLearning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials.
Learning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials. Attachment C1. SolidWorks-Specific FEM Tutorial 1... 2 Attachment C2. SolidWorks-Specific
More informationExcel -- Creating Charts
Excel -- Creating Charts The saying goes, A picture is worth a thousand words, and so true. Professional looking charts give visual enhancement to your statistics, fiscal reports or presentation. Excel
More informationVMS A1 Client Software. User Manual (V2.0)
VMS A1 Client Software User Manual (V2.0) Contents Chapter 1 Overview...4 1.1 Description...4 1.2 Running Environment...4 1.3 Function Modules...5 Chapter 2 Live View...7 2.1 User Registration and Login...7
More informationDevice Support in PowerLogic ION Enterprise 5.6 Service Pack 2
70072-0189-00 TECHNICAL 08/2008 Device Support in PowerLogic ION Enterprise 5.6 Service Pack 2 This document outlines support in ION Enterprise 5.6 Service Pack 2 for PowerLogic CM3000 series/cm4000 series,
More information10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905 Toll Free: (800) 23 FUTEK
Table of Contents Software Overview... - 4 - Product Key... - 5 - Model Selection... - 6 - Device Selection... - 7 - Menu... - 8 - File... - 8 - Edit... - 8 - View... - 8 - Format... - 8 - Help... - 9
More informationScientific Graphing in Excel 2010
Scientific Graphing in Excel 2010 When you start Excel, you will see the screen below. Various parts of the display are labelled in red, with arrows, to define the terms used in the remainder of this overview.
More informationBack-up Server DOC-OEMSPP-S/2014-BUS-EN-10/12/13
Back-up Server DOC-OEMSPP-S/2014-BUS-EN-10/12/13 The information contained in this guide is not of a contractual nature and may be subject to change without prior notice. The software described in this
More informationBIGPOND ONLINE STORAGE USER GUIDE Issue 1.1.0-18 August 2005
BIGPOND ONLINE STORAGE USER GUIDE Issue 1.1.0-18 August 2005 PLEASE NOTE: The contents of this publication, and any associated documentation provided to you, must not be disclosed to any third party without
More informationVISCOTECH Research Rheometer Performance on a QC Rheometer Budget
* Rheometers from REOLOGICA Instruments represent the latest technology in controlled strain and stress rheometers. Designed for research, yet with ease of use allowing for routine testing, all instruments
More informationR&S AFQ100A, R&S AFQ100B I/Q Modulation Generator Supplement
I/Q Modulation Generator Supplement The following description relates to the Operating Manuals, version 03 of R&S AFQ100A, and version 01 of R&S AFQ100B. It encloses the following topics: LXI features,
More informationMicrosoft Word 2011: Create a Table of Contents
Microsoft Word 2011: Create a Table of Contents Creating a Table of Contents for a document can be updated quickly any time you need to add or remove details for it will update page numbers for you. A
More informationUser Manual of Web Client
User Manual of Web Client 1 Index Chapter 1 Software Installation... 3 Chapter 2 Begin to Use... 5 2.1 Login and Exit... 5 2.2 Preview Interface Instruction... 6 2.3 Preview Image... 7 Chapter 3 Playback...
More informationTA INSTRUMENTS DYNAMIC MECHANICAL ANALYZER
TA INSTRUMENTS DYNAMIC MECHANICAL ANALYZER THE TA INSTRUMENTS DYNAMIC MECHANICAL ANALYZER The TA Instruments Q800 is the culmination of years of engineering expertise in Dynamic Mechanical Analyzers. TA
More informationKaplan Higher Education Seminar Student User Guide
Kaplan Higher Education Seminar Student User Guide Kaplan Higher Education and Professional Education R08.05.15 Table of Contents Getting Started... 1 Software Requirements... 1 Seminar Types... 1 Accessing
More informationEasy Setup Guide for the Sony Network Camera
-878-191-11 (1) Easy Setup Guide for the Sony Network Camera For setup, a computer running the Microsoft Windows Operating System is required. For monitoring camera images, Microsoft Internet Explorer
More informationTheFinancialEdge. Configuration Guide for General Ledger
TheFinancialEdge Configuration Guide for General Ledger 071012 2012 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic,
More informationCreating Accessible Documents in Word 2011 for Mac
Creating Accessible Documents in Word 2011 for Mac NOTE: Word 2011 for Mac does not offer an Accessibility Checker. After creating your document, you can double-check your work on a PC, to make sure your
More information5. Tutorial. Starting FlashCut CNC
FlashCut CNC Section 5 Tutorial 259 5. Tutorial Starting FlashCut CNC To start FlashCut CNC, click on the Start button, select Programs, select FlashCut CNC 4, then select the FlashCut CNC 4 icon. A dialog
More informationTouchKit Software User manual for Windows 7 Version: 5.10.5
TouchKit Software User manual for Windows 7 Version: 5.10.5 TouchKit V5.10.5 0 CONTENT CHAPTER 1. INSTALLING TOUCHKIT 2 CHAPTER 2. USING TOUCHKIT UTILITY...9 2.1 General...9 2.2 Tool...11 2.3 Setting...14
More information. Address the following issues in your solution:
CM 3110 COMSOL INSTRUCTIONS Faith Morrison and Maria Tafur Department of Chemical Engineering Michigan Technological University, Houghton, MI USA 22 November 2012 Zhichao Wang edits 21 November 2013 revised
More informationModel 288B Charge Plate Graphing Software Operators Guide
Monroe Electronics, Inc. Model 288B Charge Plate Graphing Software Operators Guide P/N 0340175 288BGraph (80207) Software V2.01 100 Housel Ave PO Box 535 Lyndonville NY 14098 1-800-821-6001 585-765-2254
More informationBulkSMS Text Messenger Product Manual
BulkSMS Text Messenger Product Manual 1. Installing the software 1.1. Download the BulkSMS Text Messenger Go to www.bulksms.com and choose your country. process. Click on products on the top menu and select
More informationDash 18X / Dash 18 Data Acquisition Recorder
75 Dash 18X / Dash 18 Data Acquisition Recorder QUICK START GUIDE Supports Recorder System Software Version 3.1 1. INTRODUCTION 2. GETTING STARTED 3. HARDWARE OVERVIEW 4. MENUS & BUTTONS 5. USING THE DASH
More informationTurboNest. What s New. Version 11.0. Released April 2014. Copyright 2014 Hypertherm, Inc. All rights reserved.
TurboNest Version 11.0 2015 What s New Released April 2014 What s New in TurboNest 2015 (v11.0) 1 New Features and Enhancements The following enhancements are available in the TurboNest 11.0 release: Ribbon
More informationSYMBOL MC9060 HAND HELD TERMINAL USER MANUAL
SYMBOL MC9060 HAND HELD TERMINAL USER MANUAL CORPORATE VERSION FEBRUARY 2007 TABLE OF CONTENTS Welcome... 3 Getting Started... 3 Equipment Setup... 3 Battery Installation... 4 About the Stylus... 5 Aligning
More informationSmart Home Monitoring Powered by Honeywell Total TM Connect Remote Services Basic User Guide
Smart Home Monitoring Powered by Honeywell Total TM Connect Remote Services Basic User Guide With Honeywell Total Connect Remote Services, you can stay connected and in control of your home or business
More informationPractice Fusion API Client Installation Guide for Windows
Practice Fusion API Client Installation Guide for Windows Quickly and easily connect your Results Information System with Practice Fusion s Electronic Health Record (EHR) System Table of Contents Introduction
More informationZahner 08/2013. Monitor measurements in a separate window.
Zahner 08/2013 Monitor measurements in a separate window. Online Display - 2-1. Introduction...3 2. Installation and Removal...3 2.1 Installation Procedure... 3 2.2 Removal... 4 3. Usage of the Online
More informationValveLink Mobile Software
Quick Start Guide ValveLink Mobile Software Version 4.0 ValveLink Mobile Software ValveLink Mobile software lets you configure, calibrate, and troubleshoot FIELDVUE DVC2000, DVC6000, DVC6000f, DVC6200,
More informationOnce the software has finished downloading, locate the ivms-4000(v2.0).exe on your hard drive and open it.
Installing the IVMS ZoomVideo software on a PC The ivms ZoomVideo software can be downloaded, free of charge, from the ZoomVideo website. Go to http://zoomvideo.com.au/, click on support and select the
More informationIDDERO HCx-KNX TOUCH PANELS. Quick start guide. www.iddero.com 130125-02
IDDERO HCx-KNX TOUCH PANELS Quick start guide www.iddero.com 130125-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 IDDERO CONFIGURATION SOFTWARE... 3 2.1 Installation and First Steps...3 3 TOUCH PANEL CONFIGURATION...
More informationUSER GUIDE Version 2.0
USER GUIDE Version 2.0 TABLE of CONTENTS Introduction... 3 Hardware Overview... 3 Software Overview... 4 DAYSHIFT Panel... 5 Settings Panel... 6 Setup Tab... 6 Configure... 6 Show User Guide... 6 Preview
More informationRelease Notes. R&S ZVH4/ZVH8 Cable and Antenna Analyzer
Release Notes Revision: 01 R&S ZVH4/ZVH8 Cable and Antenna Analyzer Firmware Release V1.50 These Release Notes describe the following models and options of the R&S Cable and Antenna Analyzer: R&S Cable
More informationEScribe. EScribe at a glance
EScribe EScribe is a software package used to configure and modify the operation of your DNA 200. It requires a Windows PC and connects to your DNA 200 through the onboard USB port. EScribe at a glance
More informationTA INSTRUMENTS DIFFERENTIAL SCANNING CALORIMETER (DSC) Insert Nickname Here. Operating Instructions
TA INSTRUMENTS DIFFERENTIAL SCANNING CALORIMETER (DSC) Insert Nickname Here Operating Instructions Table of Contents 1 INTRODUCTION Safety 2 Sample Preparation 3 2 BACKGROUND Background Information 4 Resources
More informationE-Loader Operation Manual
Multi-Function Tools for E-MU Instruments Revision A _ Before you Begin - Read and follow the instructions given in the READ BEFORE INSTALLING file that comes with the E-Loader installer program. E-Loader
More informationITS Training Class Charts and PivotTables Using Excel 2007
When you have a large amount of data and you need to get summary information and graph it, the PivotTable and PivotChart tools in Microsoft Excel will be the answer. The data does not need to be in one
More informationZebra Ethernet. Frequently Asked Questions
Zebra Ethernet Frequently Asked Questions Zebra Technologies Corporation Card Imaging Division 1001 Flynn Road Camarillo, CA 93012 USA Phone: (805) 579-1800 Fax: (805) 579-1808 www.cards.zebra.com 2004
More informationAFN-FixedAssets-062502
062502 2002 Blackbaud, Inc. This publication, or any part thereof, may not be reproduced or transmitted in any form or by any means, electronic, or mechanical, including photocopying, recording, storage
More informationAeroqual Connect and Cloud
Aeroqual Connect and Cloud Page 1 Contents 1. Introduction to Aeroqual Connect and Cloud... 3 1.2. Aeroqual Connect... 3 1.3. Aeroqual Cloud... 3 2. How to Connect... 4 2.1. Aeroqual Connect... 4 2.1.1.
More informationLEGENDplex Data Analysis Software
LEGENDplex Data Analysis Software Version 7.0 User Guide Copyright 2013-2014 VigeneTech. All rights reserved. Contents Introduction... 1 Lesson 1 - The Workspace... 2 Lesson 2 Quantitative Wizard... 3
More informationCalculator Notes for the TI-Nspire and TI-Nspire CAS
INTRODUCTION Calculator Notes for the Getting Started: Navigating Screens and Menus Your handheld is like a small computer. You will always work in a document with one or more problems and one or more
More informationedgebooks Quick Start Guide 4
edgebooks Quick Start Guide 4 memories made easy SECTION 1: Installing FotoFusion Please follow the steps in this section to install FotoFusion to your computer. 1. Please close all open applications prior
More informationUltraviolet-Visible (UV-Vis) Spectroscopy Background Information
1 Ultraviolet-Visible (UV-Vis) Spectroscopy Background Information Instructions for the Operation of the Cary 300 Bio UV-Visible Spectrophotometer See the Thermo OMNIC Help reference on page 49. Ultraviolet-Visible
More informationIntroduction to SignApps Express Download and Launch Introduction to User Interface How-to. Available templates
02/26/2015 Introduction to SignApps Express Download and Launch Introduction to User Interface How-to Edit Playlist Edit Presentation Edit Schedule Export Playlist Firmware Update Available templates Simple
More informationGuide to Using AMS 4.0 Marking Software
Guide to Using AMS 4.0 Marking Software Guide to Using AMS 4.0 Marking Software Contents System Requirements...2 Software Installation...2 Selecting the Output Device and Changing Settings...2 Definitions...
More informationHow schedule AccuTRConsole to run every hour
How schedule AccuTRConsole to run every hour If you have had problems with getting your reports to send out from AccuTrack or AccuSQL 2014 consistently with the Windows Service AccuTaskRunner.exe we have
More informationIntroduction to Word 2007
Introduction to Word 2007 You will notice some obvious changes immediately after starting Word 2007. For starters, the top bar has a completely new look, consisting of new features, buttons and naming
More informationThinLinX TLXOS 64-bit Firmware Installation Guide for the Intel NUC Range. Materials Required
ThinLinX TLXOS 64-bit Firmware Installation Guide for the Intel NUC Range The Intel NUC is a small form factor computer that incorporates several models from Intel Core processors to the economical Single
More informationMultiDSLA v4.8.1: Release Notes at 07 October 2013
MultiDSLA v4.8.1: Release Notes at 07 October 2013 These Release Notes give you information about MultiDSLA v4.8, feature changes, known issues and possible workarounds for those issues. In 4.8 we have
More informationIntermediate PowerPoint
Intermediate PowerPoint Charts and Templates By: Jim Waddell Last modified: January 2002 Topics to be covered: Creating Charts 2 Creating the chart. 2 Line Charts and Scatter Plots 4 Making a Line Chart.
More informationUser s Guide DDS-3X25 USB ARBITRARY FUNCTION GENERATOR
User s Guide DDS-3X25 USB ARBITRARY FUNCTION GENERATOR Content General safety summary...1 Introduction...2 Chapter 1 Getting started...3 System Requirements...4 Installing Hardware...5 Installing Software...8
More informationCentral Management Software CV3-M1024
Table of Contents Chapter 1. User Interface Overview...5 Chapter 2. Installation...6 2.1 Beginning Installation...6 2.2 Starting the CMS software...10 2.3 Starting it from the Start menu...10 2.4 Starting
More informationPlease check www.milestonesys.com for updates to make sure you install the most recent version of our software.
Guide Contents Dear Milestone Customer, With the purchase of Milestone XProtect Central you have chosen a very powerful central monitoring solution, providing instant overview of any number of Milestone
More informationCreate a Poster Using Publisher
Contents 1. Introduction 1. Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background 12. Add text to your poster 14. Add pictures to your poster 17. Add graphs
More informationCustomer Tips. Xerox Network Scanning TWAIN Configuration for the WorkCentre 7328/7335/7345. for the user. Purpose. Background
Xerox Multifunction Devices Customer Tips dc07cc0432 October 19, 2007 This document applies to these Xerox products: X WC 7328/7335/7345 for the user Xerox Network Scanning TWAIN Configuration for the
More informationImpact+OCR 1.1 Readme
April 22, 2016 Impact+OCR 1.1 Readme Welcome to the Impact+OCR (Optical Character Recognition) application, a complete software and hardware application to solve your machine vision OCR needs. This is
More informationSoMac 2.2 User Manual (Access Control)
SoMac 2.2 User Manual (Access Control) Document revision date: June/7th/2013 Based on firmware version SoMac 2.2.1.28 Content SoMac introduction... 1 Installation and Un-installation... 1 SoMac Function
More informationConnecting to a Soundweb TM. London Network
This guide will step you through the process of configuring your laptop and HiQnet TM London Architect TM to communicate with a network of Soundweb London devices. 1 Install London Architect Install the
More informationNetApp SANtricity Management Pack for Microsoft System Center Operations Manager 3.0
NetApp SANtricity Management Pack for Microsoft System Center Operations Manager 3.0 User Guide NetApp, Inc. Telephone: +1 (408) 822-6000 Part number: 215-10033_A0 495 East Java Drive Fax: +1 (408) 822-4501
More informationCorsair Link v2.4 Manual. Initial Set-up. Placing devices within the chassis
Corsair Link v2.4 Manual Initial Set-up Placing devices within the chassis When you first start up Corsair Link, there will be a list of auto-detected devices on the left column. You can drag and drop
More informationDeployment Guide: Transparent Mode
Deployment Guide: Transparent Mode March 15, 2007 Deployment and Task Overview Description Follow the tasks in this guide to deploy the appliance as a transparent-firewall device on your network. This
More informationDash 8Xe / Dash 8X Data Acquisition Recorder
75 Dash 8Xe / Dash 8X Data Acquisition Recorder QUICK START GUIDE Supports Recorder System Software Version 2.0 1. INTRODUCTION 2. GETTING STARTED 3. HARDWARE OVERVIEW 4. MENUS & BUTTONS 5. USING THE DASH
More informationQuick Reference Manual
Quick Reference Manual ii TABLE OF CONTENTS This guide first leads you through the basics of Logger Pro, including software installation procedures. You will learn how to collect data, manually enter data,
More informationNavios Quick Reference
Navios Quick Reference Purpose: The purpose of this Quick Reference is to provide a simple step by step outline of the information needed to perform various tasks on the system. We begin with basic tasks
More informationADP Workforce Now V3.0
ADP Workforce Now V3.0 Manual What s New Checks in and Custom ADP Reporting Grids V12 Instructor Handout Manual Guide V10171180230WFN3 V09171280269ADPR12 2011 2012 ADP, Inc. ADP s Trademarks The ADP Logo
More informationAuto Clicker Tutorial
Auto Clicker Tutorial This Document Outlines Various Features of the Auto Clicker. The Screenshot of the Software is displayed as below and other Screenshots displayed in this Software Tutorial can help
More informationDevice Installer User Guide
Device Installer User Guide Part Number 900-325 Revision B 12/08 Table Of Contents 1. Overview... 1 2. Devices... 2 Choose the Network Adapter for Communication... 2 Search for All Devices on the Network...
More informationWindows XP Home Edition / Windows XP Professional
Windows XP Home Edition / Windows XP Professional COOLPIX5000/995/885/775 This manual is for those users of the COOLPIX5000/995/885/ 775 who are running Nikon View 4 (Version4.3.1) under Windows XP Home
More informationSmart Control Center. User Guide. 350 East Plumeria Drive San Jose, CA 95134 USA. November 2010 202-10685-01 v1.0
Smart Control Center User Guide 350 East Plumeria Drive San Jose, CA 95134 USA November 2010 202-10685-01 v1.0 2010 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,
More informationNI InsightCM Server Version 1.0
GETTING STARTED NI InsightCM Server Version 1.0 This document contains step-by-step instructions for the setup tasks you must complete to connect an NI Condition Monitoring System to NI InsightCM Server
More informationCompany Setup 401k Tab
Reference Sheet Company Setup 401k Tab Use this page to define company level 401(k) information, including employee status codes, 401(k) sources, and 401(k) funds. The definitions you create here become
More informationSmart Card Authentication. Administrator's Guide
Smart Card Authentication Administrator's Guide October 2012 www.lexmark.com Contents 2 Contents Overview...4 Configuring the applications...5 Configuring printer settings for use with the applications...5
More informationUniversal Analysis 2000
Universal Analysis 2000 Operator's Manual PN 925809.002 Rev. J Issued September 2001 THERMAL ADVANTAGE UNIVERSAL ANALYSIS OPERATOR'S MANUAL I 1998, 1999, 2000, 2001 by TA Instruments 109 Lukens Drive New
More informationMicrosoft PowerPoint 2010 Handout
Microsoft PowerPoint 2010 Handout PowerPoint is a presentation software program that is part of the Microsoft Office package. This program helps you to enhance your oral presentation and keep the audience
More informationivms-4200 Client Software Quick Start Guide V1.02
ivms-4200 Client Software Quick Start Guide V1.02 Contents 1 Description... 2 1.1 Running Environment... 2 1.2 Surveillance System Architecture with an Performance of ivms-4200... 3 2 Starting ivms-4200...
More informationInternet Explorer 7. Getting Started The Internet Explorer Window. Tabs NEW! Working with the Tab Row. Microsoft QUICK Source
Microsoft QUICK Source Internet Explorer 7 Getting Started The Internet Explorer Window u v w x y { Using the Command Bar The Command Bar contains shortcut buttons for Internet Explorer tools. To expand
More informationChromQuest 5.0 Chromatography Data System
ChromQuest 5.0 Chromatography Data System User Guide CHROM-97252 Revision A March 2008 2008 Thermo Fisher Scientific Inc. All rights reserved. Surveyor is a registered trademark of Thermo Fisher Scientific
More informationPTR/DTR. Printing Thermometer Software. Software User Manual
PTR/DTR Printing Thermometer Software Software User Manual CONTENTS Introduction 4 To install the PTR/DTR PC software 4 General tab 6 Device 6 Settings 6 Status 6 Ticket preview 6 Layout 7 Selecting a
More informationSample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.
Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format
More informationIGSS. Interactive Graphical SCADA System. Quick Start Guide
IGSS Interactive Graphical SCADA System Quick Start Guide Page 2 of 26 Quick Start Guide Introduction This guide is intended to get you up and running with the IGSS FREE50 license as fast as possible.
More informationAbout the HealthStream Learning Center
About the HealthStream Learning Center HealthStream Learning Center TM Administrator access to features and functions described in the HLC Help documentation is dependent upon the administrator s role
More informationHP LaserJet MFP Analog Fax Accessory 300 Send Fax Driver Guide
HP LaserJet MFP Analog Fax Accessory 300 Send Fax Driver Guide Copyright and License 2008 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation, or translation without prior written
More informationCreate Charts in Excel
Create Charts in Excel Table of Contents OVERVIEW OF CHARTING... 1 AVAILABLE CHART TYPES... 2 PIE CHARTS... 2 BAR CHARTS... 3 CREATING CHARTS IN EXCEL... 3 CREATE A CHART... 3 HOW TO CHANGE THE LOCATION
More informationSetting up and Automating a MS Dynamics AX Job in JAMS
Setting up and Automating a MS Dynamics AX Job in JAMS Introduction... 1 Creating a User for the AX Job Execution... 2 Setting up the AX Job... 4 Create a New folder... 4 Adding a new Dynamics AX Job using
More informationService Desk Manager QUICK TIP: Service Desk Manager 12.6 Upgrade New Features and Known Issues
Service Desk Manager QUICK TIP: Service Desk Manager 12.6 Upgrade New Features and Known Issues New Features: Firefox Functionality Analysts now have the ability to use the most up-to-date versions of
More informationPlanning and Managing Projects with Microsoft Project Professional 2013
Project management deliverables (e.g. reports); WBS deliverables can be used for report timing Steps to Create a Project from an Existing Template: 1. Click File then New. 2. Select any of the featured
More informationThis section will focus on basic operation of the interface including pan/tilt, video, audio, etc.
Catalogue Basic Operation... 2 For Internet Explorer... 2 For Other Non-IE Web Browsers... 5 Camera Settings... 6 System... 6 About... 6 PT Setting... 7 Backup and Restore Setup... 8 NTP Setting... 8 System
More information