Metering Valves. MS, MV, ML and MH Series.

Transcription

1 Metering Valves MS, MV, ML and MH Series

2 Metering Valves Features MS Series Working pressure up to: 000 psig ( bar) Working temperature: -0 F to 00 F (- C to 0 C) Orifice size: 0.0" (0. mm) Max. flow coefficient (Cv): 0.00 Stem taper: Turns to open: to Shutoff service: not available Variety of end connections Panel mountable Flow pattern: straight, angle, cross and double Handle type: knurled, vernier and slotted Variety of materials available for valve body MV and ML Series Working pressure up to: 000 psig ( bar) Max. flow coefficients (Cv): Orifice sizes: Stem taper: MH Series Working pressure up to: 000 psig ( bar) Working temperature: -0 F to 00 F (- C to 0 C) MV series: 0.0 ML series: 0. MV series: 0.0 " (. mm) ML series: 0. " (. mm) MV series: ML series:. Turns to open: MV series: to0 ML series: 0 to Shutoff service: MV series: not available ML series: available Variety of end connections Panel mountable Flow pattern: straight, angle, cross (MV Series) and double (MV Series) Handle type: MV series: knurled, vernier and slotted ML series: round and vernier Variety of materials available for valve body Working temperature: - F to 0 F (- C to C) Orifice size: 0.0" (. mm) Max. flow coefficient(cv): 0.0 Stem taper: Shutoff service: available Variety of end connections Turns to open: to0 Panel mountable Flow pattern: straight and angle Handle type: round circular and vernier Variety of materials available for valve body

3 Metering Valves Pressure vs.temperature Temperature ( C) MH Series, SS ody Material Pressure (psig) MS Series MV and ML Series 0 Pressure (bar) Temperature ( F). Graphs are based on Fluorocarbon and Graphite (for MH Series).. Contact the authorized representative or Group for curve graph of other materials. Temperature Ranges for Different seal Materials Seal Material Temperature Range F ( C) una N ( NR) thylene Propylene (PDM) Fluorocarbon (FKM) Kalrez (FFKM) Neoprene (CR) PTF Graphite O-Ring (for MS, MV, ML Series) Stem Packing (for MH Series) -0 to (- to 00) -0 to 00 (- to ) -0 to 00 (- to 0) -0 to (- to ) -0 to 0 (- to ) - to 00 (- to ) - to 0 (- to ) Standard Materials of Construction MS Series Component ody Stem ody Seal O-ring Panel Mount Nut onnet Valve ody Material Grade/STM Specification SS SS/ SS/ S00 SS/ Fluorocarbon FKM Fluorocarbon FKM rass C00/ C000/ C000/ Lock Screw Handle Screw Handle SS/ C000/

4 Metering Valves MV Series Component Valve ody Material Grade/STM Specification SS rass 0 ody SS/ C00/ Stem SS/ ody Seal O-ring ody xtension SS/ Fluorocarbon FKM Fluorocarbon FKM C000/ Stem Guide Ring PTF/D0 onnet Sleeve Pannel Mount Nut onnet SS/ SS/ C000/ C000/ 0 Lock Screw Handle Screw Handle SS/ C000/ ML Series Component ody Valve ody Material Grade/STM Specification SS SS/ rass C00/ Stem Hardened SS/ O-ring Fluorocarbon FKM Stem Guide Ring PTF/D0 onnet Sleeve Pannel Mount Nut onnet SS/ SS/ C000/ C000/ Handle Screw Handle nodized aluminium. Lubricants: Silicone-based. Contact the authorized representative or Group for other materials.

5 Metering Valves MH Series 0 Component Material Grade/STM Specification ody Stem SS/ 0C SS/ onnet SS/ Union Nut SS/ Panel Mount Nut Packing Gland SS/ Packing PTF/D0 Union Nut SS/ Handle Screw 0 Handle Nylon Lubricant:Silicone-based Flow Data at 0 F (0 C) Pressure Drop to tmosphere psig (bar) ir Flow std ft /min (std L/min) MS Series Water Flow U.S. gal/min (L/min) ir Flow std ft /min (std L/min) MV Series ML Series MH Series Water Flow U.S. gal/min (L/min) ir Flow std ft /min (std L/min) Water Flow U.S. gal/min (L/min) ir Flow std ft /min (std L/min) Water Flow U.S. gal/min (L/min) 0 (0.) 0.0 (.) 0.0 (0.0) 0. (.) 0.0 (0.).00 (.) 0. (.0) 0. (.) 0. (0.) 0 (.) 0.0 (.) 0.0 (0.0) 0.0 (.) 0. (0.).0 ().0 (.0).0 (.) 0. (.00) 00 (.0) 0.0 (.) 0.0 (0.).0 (.) 0.0 (.0).0 ().0 (.0).0 (.) 0.0 (.0) Flow Coefficient at Turns Open 0.0 ML Series, Straight Pattern ML Series, ngle Pattern 0.0 Flow Coefficient (Cv) MV Series, Straight Pattern MH Series, Straight Pattern MH Series, ngle Pattern MV Series, ngle Pattern MS Series, Straight Pattern MS Series, ngle Pattern Number of Turns Open

6 Metering Valves Dimensions MS Series " (.) C 0. " (.) D C asic Ordering Number MS -FL- MS -FL- MS -FL- MS -ML- MS -ML- MS -FR- MS -FL- MS -FL- MS -FL- MS -ML- MS -FNS- Connection Type and Size Dimension, in. (mm) Inlet Outlet C D F / " / " mm mm / Male FR /" /" mm / Female NPT /" /" mm mm / Male FR /" /" mm / Female NPT Straight Pattern. (.) ngle Pattern. (.).0 (.0). (.0).0 (.0). (.).0 (.).0 (.) 0. (0.) 0. (.).0 (.) 0. (.) 0. (.) 0. (.) 0. (.) 0. (.) 0. (0.) 0. (.).0 (.) 0. (.) 0. (.) 0. (.)

7 Metering Valves MV and ML Series 0. " (.) C 0. " (.) D C asic Ordering Number ML -ML- MV -FL- MV -FL- MV -ML- MV -ML- MV -NS- MV -NS- MV -FNS- MV -FR- Connection Type and Size Dimension, in. (mm) Inlet Outlet C D F /" mm mm / Male NPT / Male NPT / Female NPT / Male FR /" / " mm mm / Male NPT / Male NPT / Female NPT / Male FR / " / " mm mm / Male NPT / Male NPT / Female NPT / Male FR / " / " mm mm / Male NPT / Male NPT / Female NPT / Male FR Straight Pattern. (.) ngle Pattern. (.). (.0). (.). (.0). (.). (.0). (.).0 (.).0 (.).0 (.).0 (.).0 (0.). (.). (.).0 (.).0 (.).0 (.).0 (.).0 (.) 0.0 (0.) 0. (.) 0. (.). (.).0 (.).0 (.).0 (.).0 (.).0 (.) 0.0 (0.) 0. (.) 0. (.) 0.0 (.) 0.0 (.) 0. (.) 0. (.) asic Ordering Number MV -FL- MV -FL- MV -ML- MV -ML- MV -NS- MV -NS- MV -FNS- MV -FR- ML -FL- ML -FL- ML -ML- ML -NS- ML -FL- Connection Type and Size Dimension, in. (mm) Inlet Outlet C D F /" mm / Male NPT mm /" mm / Male NPT mm Straight Pattern. (.) ngle Pattern. (.). (.). (.). (.).00 (0.). (.). (.0). (.) 0. (.). (.0). (.). (.) 0. (.)

8 MH Series F F Panel Hole 0." (.0) Panel Hole 0. " (.0) D 0. " (.) D C 0 Metering Valves 0. " (.) C asic Ordering Number Connection Type and Size Dimension, in. (mm) Inlet Outlet C D F Straight Pattern MH -FL- MH -ML- MH -FNS- MH -FNS- mm / Female NPT / Female NPT mm / Female NPT / Female NPT.0 (.0).00 (0.).0 (.).0 (0.).00 (.).0 (.).0 (.) 0. (.). (.0). (.) 0.0 (0.) ngle Pattern MH -FL- MH -ML- MH -FNS- MH -FNS- mm / Female NPT / Female NPT mm / Female NPT / Female NPT. (.). (.). (.) 0. (.).0 (.). (.0). (.).00 (.). (.) Optional Handles Slotted Handle Flow setting adjustment is available with a screwdriver Ideal for installation where handle is difficult to access vailable for MS and MV series Vernier Handle Precise graduated aluminum alloy handle Repeatable flow setting djustment accurate to / turn (/000 of an inch) vailable for all series 0. " (.) 0. " (.0) 0 0

9 Metering Valves Optional Patterns Cross Pattern Double Pattern MV Series: 0. " (.) MS Series: 0. " (.) C D MV Series: 0. " (.) MS Series: 0. " (.) D. Fluid flows between side ports around stem in any stem position.. Fluid flows through branch port can be metered in both directions. Inlet valve handle can be set and locked at desired maximum flow, outlet valve handle can be used for fine flow control up to the preset maximum of the inlet valve. asic Ordering Number Connection Type and Size Dimension, in. (mm) Inlet Outlet C D F Cross Pattern MS -FL- MS -ML- /" mm /" mm. (.). (.) Double Pattern 0. (.) 0. (.) 0. (.) 0. (.) MS -FL- MS -ML- /" mm /" mm. (.) Cross Pattern.0 (.) 0. (.) 0. (.) 0. (.) MV -FL- MV -ML- mm mm. (.0).0 (.).0 (.). (.) 0.0 (.) 0. (.) Double Pattern MV -FL- MV -ML- mm mm. (.).0 (.). (.) 0.0 (.) 0. (.). means double ferrule tube fittings, FR means metal gasket seal fittings.. Sizes and types listed are standard. Other sizes and types are available upon request. For special sizes and types, refer to the ordering information.. Dimensions are shown with nuts finger-tightened. ll dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or Group.

10 Metering Valves Part Number Description MVSS - FL - ML - VJ - SF Series ody Material Outlet Type Outlet Size Handle Type and Default color Inlet Type Inlet Size Seal Material Handle Color Flow Pattern Special pplication MS MV ML MH SS SS L L SS S L S 0 SS 0L SS SS rass FNS NS FRT RT FMS MS FRP P FL ML Female NPT Male NPT Female SPT Male SPT Female Metric Thread (for RP) Male Metric Thread (for RG) Female SPP (for RP) Male SPP (for RG) Fractional Tube Fitting Metric Tube Fitting /" /" mm mm Same as inlet Specified in the same way as the inlet type and size N Z Fluorocarbon (FKM) PTF (MH Only) una N (NR) thylene Propylene (PDM) Neoprene (CR) Kalrez (FFKM) G Graphite (MH Only) L V Round (lack) For MH and ML Knurled (Metallic luster) For MS and MV Slotted (Metallic luster) Vernier (MHSeries: Metallic luster) (Other Series: lack) Note: Most configurations are available but not everyone. C F J O Y Default Red Green lue Orange Yellow D R Straight ngle Double For MS and MV Cross For MS and MV S NO NC MR0 FO FR FO Fitting Male FR Fitting. Cleaning and Packaging: FC-0: Standard cleaning and packaging for general industrial procedures. FC-0: Special cleaning and packaging for wetted system components to ensure compliance with product cleaning requirement of STM G Level C. Cleaning and Packaging FC-0 F FC-0

11 Group GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax: + 0 Incorporated lock C, Zone, Yingtai lndustrial Park, Dalang Street, Longhua New District, Shenzhen, 0, China Tel.: Fax: + 0 Middle ast Oil quipment Trading LLC 0-0, Makateb Tower, irport Road, P.O.ox, Deira, Dubai, U Tel.: + Fax: + info@fitokgroup.com FK-IC-GV-0-N-0