Universal type. Elbow type AS13 1FG-M5 AS23 1FG-01 AS23 1FG-02 AS33 1FG-02 AS33 1FG-03 AS43 1FG-04. Specifications
|
|
|
- Shanon Wood
- 7 years ago
- Views:
Transcription
1 Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG RoHS Stainless specifications for use in corrosive environments. Stainless steel used for metal parts. Suitable for use on CRT lines where copper ions can cause damage, for washing food processing equipment where there is exposure to water and salt water, etc., and in clean rooms where dust from discoloration and rusting of copper materials is unacceptable. Light colors to match equipment White resin parts are used for bodies and release buttons. Threads with and without seal are available as standard. Applicable tubing: Inch sizes standardized Inch sizes are now available for all models. Elbow type 1FG-M5 1FG-1 1FG- 1FG- 1FG- 1FG- 1FG-U/ 1FG-N1 1FG-N 1FG-N 1FG-N 1FG-N 1FG-N 1/ Note 1) Meter-out and meter-in types can be visually differentiated by the flow direction symbol on the resin body. Note ) Elbow type only Specifications Universal type 1FG-M5 1FG-1 1FG- 1FG- 1FG- 1FG- Port size M5 x. R 1/ R 1/ R 1/ R / R 1/ 1FG-U/ - UNF 1FG-N1 1/ 1FG-N 1/ 1FG-N 1/ 1FG-N / Applicable tubing O.D. Metric size Inch size. 1/" 5/" /1" 1/" 5/1" /" 1/" Elbow type Fluid Air Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure.1 MPa Ambient and fluid temperature 5 to C (No freezing) Applicable tubing material Nylon, Soft nylon, Polyurethane Note) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used. (Refer to pages 11 and for details.) Flow Rate and Sonic Conductance Universal type 5 Made to Order (Refer to page 5 for details.) Symbol Flow Direction Symbols on Body Meter-out type Meter-in type Indication symbol Symbol 1FG 1FG- 1 1FG- 1FG 1FG 1FG 1FG- 1 1FG- 1FG 1FG ø. ø. ø ø ø ø ø ø ø ø ø Metric size ø ø ø ø ø Tubing ø ø O.D. ø1/" ø1/" ø/1" ø5/" ø/1" ø1/" ø1/" ø5/1" ø/" ø/" ø1/" ø5/" ø5/" ø1/" ø5/1" Inch size ø/1" ø5/1" ø/" ø1/" Controlled flow Free flow Flow rate (L/min (ANR)) Sonic conductance dm /(s bar) Critical Controlled flow..5. pressure ratio Free flow... Note) Flow rate values are measured at.5 MPa and C
2 1 M5 standard 1/, 1/ standard / standard 1/ standard Nil N Body size Type Elbow Universal Thread type Metric thread (M5) Unified thread (- UNF) R 1FG 1FG Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type 1 F G 1 Control type Meter-out 1 Meter-in With One-touch fitting Stainless steel specifications (SUS) M5 U/ 1 1FG- 1 1FG- 1 Port size M5 x. - UNF 1/ 1/ / 1/ Made to Order (Refer to the below for details.) Option Nil None S With seal M5 and U/ are not available with seal. Applicable tubing O.D. Note) Metric size Inch size ø. ø ø ø ø ø ø1/" ø5/" ø/1" ø1/" ø5/1" ø/" ø1/" Note) For applicable tubing O.D. selection, refer to the on page 5. Use ø1/" tube. 1 Lubricant: Vaseline X Grease-free (Seal: Fluorine Coated) + Throttle Valve (Without Check Valve) Ex.) 1FG-M5--X Ex.) 1FG-M5--X1 Throttle Valve (Without Check Valve) X1 Ex.) 1FG-M5--X1 Note) Throttle valve is only compatible with the part no. of the meter-out type. Needle Valve/Flow Characteristics How to Order Made to Order Series -FG 1FG- 1FG- Lock nut option Nil Hexagon lock nut J Round lock nut X1 Note 1) Not particle-free Note ) Throttle valve is only compatible with the part no. of the meter-out type. Note) The flow characteristics are representative values. TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 5,,,, 9, 1,,,, 9,, 11 5,, 1FG 1FG, 11,, 9, 1FG 1FG,, 11 5
3 Series -FG Construction: Elbow Type Meter-out type M5 type U/ type 1FG- Meter-in type M5 type U/ type 11FG- No. Description Material Note Body A Handle Body B Needle Needle guide Seat ring Lock nut U seal Cassette Seal Gasket H, Stainless steel M5 type only Caution Be sure to read before handling. Refer to front matter 5 for Safety Instructions and pages to 1 for Flow Control Equipment Precautions. 5
4 Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG Construction: Universal Type Meter-out type M5 type U/ type 1FG- Meter-in type M5 type U/ type Component Parts No. Description Material Note Body A Elbow body Handle Body B Needle Needle guide Seat ring Lock nut U seal Cassette Seal Spacer Gasket H, Stainless steel M5 type only 11FG- TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 55
5 Series -FG Dimensions: Elbow Type (Hexagon width across flats) M5 type U/ type (Hexagon width across flats) Metric Size d T H D1 D L1 L L (1) A () L M1 Max. Min. Max. Min. (g) 1FG-M5-. M5 x FG-M FG-M5- M5 x FG-1-. R 1/ FG FG FG-1- R 1/ FG FG FG FG-- R 1/ FG FG FG FG-- R 1/ FG FG FG FG-- R / FG FG FG-- R 1/ Note 1) Reference dimensions Note ) Reference dimensions of M5 x., R threads after installation. Inch Size d T 1FG-U/-1 1/" 1FG-U/- 5/" 1FG-U/-5 /1" 1FG-U/- 1/" 1FG-N1-1 1/" 1FG-N1-5/" 1FG-N1-5 /1" 1FG-N1-1/" 1FG-N1-9 5/1" 1FG-N- 5/" 1FG-N-5 /1" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N-11 /" 1FG-N- 1/" - UNF 1/ 1/ 1/ / 1/ H D1 D L1 L L (1) A () L M1 Max. Min. Max. Min. (g) Note 1) Reference dimensions Note ) Reference dimensions of - UNF and threads after installation. 5
6 Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG Dimensions: Universal Type Metric Size M5 type U/ type d T L5 (1) A () H D1 D D L1 L L L M1 Max. Min. Max. Min. (g) 1FG-M FG-M5- M5 x FG-M FG FG-1-1FG-1-9. R 1/ FG-1-1FG FG FG-- R 1/ FG-- 1FG FG FG-- R 1/ FG FG FG FG-- R / FG-- 1FG FG-- R 1/ Note 1) Reference dimensions Note ) Reference dimensions of M5 x., R threads after installation. Inch Size (Hexagon width across flats) (Hexagon width across flats) d T 1FG-U/-1 1/" 1FG-U/- 5/" 1FG-U/-5 /1" 1FG-U/- 1/" 1FG-N1-1 1/" 1FG-N1-5/" 1FG-N1-5 /1" 1FG-N1-1/" 1FG-N1-9 5/1" 1FG-N- 5/" 1FG-N-5 /1" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N-11 /" 1FG-N- 1/" - UNF 1/ 1/ 1/ / 1/ L5 (1) A () H D1 D D L1 L L L M1 Max. Min. Max. Min. (g) Note 1) Reference dimensions Note ) Reference dimensions of - UNF and threads after installation. TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 5
7 Speed Controller with One-touch Fitting Stainless Steel Series In-line Type Series -FG 1FG 1FG 51FG 1FG 1FG Applicable tubing O.D. Metric size Inch size. 1/" 5/" /1" 1/" 5/1" /" 1/" Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Applicable tubing material Air 1.5 MPa 1 MPa.1 MPa 5 to C (No freezing) Nylon, Soft nylon, Polyurethane Note) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used. (Refer to pages 11 and for details.) Flow Rate and Sonic Conductance 1FG 1FG 51FG 1FG 1FG Flow Direction Symbols on Body Indication symbol Symbol Tubing O.D. Controlled flow Free flow ø. Metric size ø ø ø1/" Inch size ø5/" ø/1" Flow rate (L/min (ANR)) Sonic conductance dm /(s bar) Critical Controlled flow... pressure ratio Free flow Note) Flow rate values are measured at.5 MPa and C. ø ø ø ø ø ø ø ø ø ø ø5/" ø/1" ø/1" ø1/" ø1/" ø5/1" ø/" ø/" ø1/" ø1/" ø5/1" Made to Order (Refer to page 59 for details.) 5
8 1FG Speed Controller with One-touch Fitting Stainless Steel Series In-line Type 5 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Stainless steel specifications () Lubricant: Vaseline Ex.) 1FG--X With One-touch fittings Throttle Valve (Without Check Valve) Ex.) 1FG--X1 Needle Valve/Flow Characteristics 1FG How to Order 1 F G Made to Order X X1 Note) The flow characteristics are representative values. 51FG Series -FG Lock nut option Nil Hexagon lock nut J Round lock nut Made to Order (Refer to the below for details.) Applicable tubing O.D. Metric size Inch size ø. 1 ø1/" ø ø5/" ø 5 ø/1" ø ø1/" ø 9 ø5/1" ø 11 ø/" Use ø1/" tube. ø1/" Grease-free (Seal: Fluorine Coated) + Throttle Valve (Without Check Valve) Ex.) 1FG--X1 Note) Not particle-free X1 TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 1FG 1FG 59
9 Series -FG Construction Component Parts No. Description Material Note Body A Handle Body B Needle Needle guide Lock nut U seal Spacer Cassette Seal H Dimensions Metric Size 1FG- 1FG- 1FG- 1FG- 1FG- 51FG- 51FG- 1FG- 1FG- 1FG- 1FG- 1FG- 1FG- d. D1 D L1 L Note 1) Reference dimensions L (1) Max. Min M (g) Inch Size 1FG-1 1FG- 1FG-5 1FG- 1FG- 1FG-5 1FG- 51FG-5 51FG- 51FG-9 1FG- 1FG-9 1FG-11 1FG-11 1FG- d 1/" 5/" /1" 1/" 5/" /1" 1/" /1" 1/" 5/1" 1/" 5/1" /" /" 1/" D1 D L1 L Note 1) Reference dimensions L (1) Max. Min M (g)
10 Information Akihabara UDX F, -1-1, Sotokanda, Chiyoda-ku, Tokyo 1-1, JAPAN URL SMC Corporation All Rights Reserved -E5 Issued: June, D-DNP P- (DN) Stainless Steel Speed Controller (Elbow Type) Series G Material: Stainless steel 1 Sealant: Special FKM Seat ring: Applicable tubing materials FEP PFA Nylon Soft nylon Polyurethane Polyolefin Flow Rate and Effective Area G F-M5 G F-1 G F- G5 F- G F- Tubing O.D. (mm) ø, ø ø ø, ø ø ø, ø ø ø, ø ø Controlled Flow rate (l/min (ANR)) (free) flow Effective area (mm ) Note) Flow rate is measured at.5 MPa and C. Elbow type G F-M5 G F-1 G F- G5 F- G F- Port size M5 x. R1/ R1/ R/ R1/ Applicable tubing O.D. (mm) Applicable cylinder bore size (mm),, 1,, 5,, 5,,, 5,,, JIS Symbol Meter-out type Meter-in type Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Applicable tubing material Air 1.5 MPa 1 MPa.1 MPa 5 to C (No freezing) turns ( turns Note 1) ) FEP, PFA, Nylon, Soft nylon, Polyurethane Note ), Polyolefin Note 1) In case of G F-M5 Note ) Please be cautious of the max. operating pressure when soft nylon or polyurethane tubing is used. Note ) When polyurethane tubing is used, please use an inner sleeve. How to Order Conforms to Food Sanitation Laws (Material of the component parts meets the apparatus and container packaging standards.) Speed controller G F 1 S Body material G Stainless steel Body size M5 1/ 1/ 5 / 1/ Type Elbow Control type Meter-out 1 Meter-in With one-touch fitting With seal In the case of M5, seal is inapplicable to the product. Applicable tubing O.D. ø ø ø ø ø Port size M5 M5 x. 1 R1/ R1/ R/ R1/ 1
11 Series G Needle Valve: Flow Characteristics GF-M5 G1F-M5 GF-1 G1F-1 GF- G1F- Flow rate (l/min (ANR)) Effective area (mm ) Flow rate (l/min (ANR)), 1 Effective area (mm ) Flow rate (l/min (ANR)), Effective area (mm ). 5 (turns) 5 (turns) 5 (turns) G5F- G51F- GF- G1F- Flow rate (l/min (ANR)) 5, 5 Effective area (mm ) Flow rate (l/min (ANR)) Effective area (mm ) 5 (turns) 5 (turns)
12 Stainless Steel Speed Controller Series G Construction Elbow type Meter-out Meter-in y y u u q w e r t i q w e r t i o o!!!1!1!!!!!!!5!5 M5 port M5 port y y u u q w e r t! o q w e r t! o!!!1!1 i i!!!!!!!! Component Parts No. Description Material No. Description Material Release button Guide Chuck Seal Body A Handle Lock nut Needle Body B Stainless steel 1 Stainless steel 1 Stainless steel 1 Special FKM Stainless steel 1 Stainless steel 1 Stainless steel 1 Stainless steel 1 Stainless steel Ring U-seal Seat ring Gasket Needle guide Special FKM Special FKM Special FKM Stainless steel 1 FKM Stainless steel 1, Special FKM Stainless steel 1
13 Series G Dimensions G F-M5 H (Width across flats) L ød M L1 T L G F-1 G F- G5 F- G F- L L5 ød L A L5 L A L H (Width across flats) M L1 T L L G F-M5- G F-M5- G F-1-S G F-1-S G F-1-S G F--S G F--S G F--S G5 F--S G5 F--S G5 F--S G F--S Applicable tubing O.D. ød T M5 x. 1/ 1/ / 1/ H 19 D L L L L L L Max. Min A Note) Max. Min M (g) Note) Reference thread dimensions after installation.
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
Series M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
Socket case Socket. Easy insertion of tube by the floating mechanism to adjust to the case hole. Clamp bolt. Possible to clamp with one bolt at once.
Multi-connector Series DM RoHS The use of the multiconnector enables panel mount connections with other apparatus and can provide the reliability of one-touch installation and removal of multi-tubes (nylon,
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Wear Resistant Tubing
Wear Resistant Tubing 1/ brasion: pprox. (Compared with SMC polyurethane tubing TU series) 3 6-color variations Description Wear resistant tubing TUZ series Polyurethane tubing TU series Green RoHS Maximum
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
CAT.ES120-4 A. Precision Clean Regulator. Series SRP. High precision, low flow consumption stainless steel regulator
CAT.ES120-4 A Precision Clean Regulator Series SRP High precision, low flow consumption stainless steel regulator Precision Clean Regulator Series SRP High precision, low flow consumption stainless steel
Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25
Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM200 25 x 40 x 52 One way roller
Table of Contents - Tubing
Table of Contents - Tubing Tubing Page TU- to 22 TIA Nylon Tubing Inch... TU- T Nylon Tubing Metric... TU-2 TISA Soft Nylon Tubing Inch... TU-3 TS Soft Nylon Tubing Metric... TU- TIU Polyurethane Tubing
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
Cylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC
8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
High-Purity Fluoropolymer Fittings
High-Purity Fluoropolymer Fittings Hyper Fitting/Series LQ1, Work Procedure Instructions Insertion Tool The parts case is shipped together with the fitting jig. Refer to page 4 for How to Order. R type
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
HOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
Round Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Metric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Refrigeration and air conditioning Date: 10/2013
Catalogue 40 WEH Connectors for filling, evacuating and testing of refrigeration and air conditioning components Refrigeration and air conditioning Date: 10/2013 WEH - We Engineer Hightech All rights reserved,
VSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
CAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
3-step setting. 2-Color Display High-Precision Digital Pressure Switch. Series ZSE30A(F)/ISE30A. Added vacuum range.
2-Color Display High-Precision Digital Pressure Switch Series ZSE3A(F)/ISE3A RoHS Can copy to up to 1 switches simultaneously. The settings of the master sensor can be copied to the slave sensors. Reducing
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
BACKPACK SPRAYERS. MODEL NOS: KSP16 & KSP20 Part Nos: 3402270 & 3402275 OPERATING & MAINTENANCE INSTRUCTIONS GC04/12
BACKPACK SPRAYERS MODEL NOS: KSP16 & KSP20 Part Nos: 3402270 & 3402275 OPERATING & MAINTENANCE INSTRUCTIONS GC04/12 INTRODUCTION Thank you for purchasing this CLARKE Sprayer, designed for use only with
Section 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
OEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
Thread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve
Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.
Digital Flow Switch for Water 3 -color/2-screen display
3-color display New Digital Flow Switch for Water 3 -color/-screen display RoHS Main screen Sub screen Note 3) Main screen Sub screen Note 3) Instantaneous flow rate Set value Note ) ccumulated value Peak/ottom
PRESSURE REDUCING VALVES
0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the
VDL 53 - Vacuum drying oven for flammable solvents
Vacuum drying ovens VDL 53 - Vacuum drying oven for flammable solvents The VDL series ensures maximum safety when drying organic solvents in accordance with TÜV/GS guidelines. The interior chamber is designed
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Operating Instructions
Operating Instructions Cable Glands Ex d and Ex e with Compound > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Information...3 4 Designated Use...4 5 Technical Data...4
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves Spring
Height w/o Terminals (in)
EaglePicher Technologies, LLC Commercial Power P.O. Box 47 Joplin, MO 6482 (417) 623-8 inquiry.carefree@eaglepicher.com Carefree Sealed Lead Acid (SLA) MSDS EaglePicher s Carefree lead acid batteries are
Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
Eco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
Working Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
KDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Variable Area Flowmeters
www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Explosion proof enclosures
1 of 7 Explosion proof enclosures DE8 C 2 of 7 The Ex d enclosures are rugged and designed for harsh environment like: Oil and gas industry Chemical industry Pharmaceutical industry Agribusiness Without
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire