Catalogue Measuring instruments and tools

Transcription

1 Catalogue Measuring instruents 9/2010

2 Contents Rules, straight edges, surface plates... pgs 2 Gauges, agnifying glasses, protractors... pgs 6 Stands, indicators, support props... pgs 10 Fir joint calipers, depth calipers... pgs 12 Marking gauges, height gauges, scribers, pencils... pgs 14 Tap holders, die holders... pgs 16 Squares ČSN and DIN, triangels... pgs 17 Spirit levels - workshop, bricklayers, carpenters... pgs 21 Precision levels... pgs 23 Calipers pgs 24 Microeters... pgs 29 Folding rules, easuring tapes, long tapes... pgs 34 Laser progra... pgs 38 Levels... pgs 40 Gauges... pgs 41 1

3 Rules, straight edges, surface plates Steel ruler with graduation ČSN Diensions /1001.ht x32x6 2 17, x40x8 2 38, x40x8 2 73, x50x ,75 Stainless steel available upon request Bevelled steel ruler with graduation ČSN Diensions /1007.ht Innovation Innovation x25x5 2 16, x25x5 2 20, x32x6 2 46, x32x6 2 91, x40x ,63 Aluiniu bevelled ruler Diensions / ht x50x5 4 2, x50x5 4 4,73 Steel rule with graduation ČSN Diensions /1012.ht Stainless steel available upon request x25x5 2 15, x32x6 2 34, x32x6 2 78, x40x , x40x , x50x , x60x ,03 2

4 Flexible steel rule - INOX, PN Diensions /1017.ht x13x0,5 2 1, x15x0,5 2 2, x20x0,5 2 9, x20x1, , x20x1, ,60 Steel rule - INOX, ČSN Diensions / ht x13x0,50 2 1, x13x0,50 2 2, x25x1 2 3, x30x1 2 6, x38x1, , x38x1, , x40x2 2 61,41 Steel rule, vertical graduation ČSN Diensions /1027.ht x30x5,5 2 19, x30x5,5 2 36,36 Precision straight edge PN Diensions /1029.ht x40x8 3 38, x60x , x70x , x80x ,76 Workshop straight edge PN Diensions /1035.ht x40x8 4 30, x40x8 4 60, x50x , x60x ,62 3

5 Knife edge straight edge DIN 874 KINEX Diensions / ht x25x5 0 14, x25x5 0 19, x25x5 0 21, x25x5 0 23, x28x6 0 27, x38x8 0 36, x38x8 0 77, x38x ,91 Granite surface plate DIN Diensions / ht x300x , x400x , x400x , x630x , x800x , x1000x , x1600x , x1600x ,72 Another diensions and cast iron plates upon request Supplied incl. producer s calibration certificate Granite surface plate stands Diensions / ht For diension 400x400x100 58, For diension 630x400x , For diension 1000x630x , For diension 1200x800x , For diension 1600x1000x ,13 Cast iron surface plates DIN Diensions / ht x , x , x ,13 Another diensions upon request Supplied incl. producer s calibration certificate 4

6 Wooden rule 1070 Diensions /1070.ht x30x3 4 1, x50x5 4 3,36 Certificated wooden rule ČSN Diensions x35x9 2 17,55 /1072.ht x35x9 2 15,02 Test certificate is valid for actual year + next two years Wooden rule for painteners 1080 Diensions /1080.ht x44x4 4 1,61 5

7 Gauges, agnifying glasses, protractors Gauge blocks set DIN 861/ / ht Blocks of different diensions and at any precision are available on request. Manufacturers certificate included. Specification Specification size/quantity /pcs Specification standard steel 38 DIN 861/1 278, steel 47 DIN 861/1 301, steel 83 DIN 861/1 452, steel 87 DIN 861/1 479, steel 103 DIN 861/1 575,84 Ceraic Gauge blocks set DIN 861/ / ht Manufacturers certificate included Specification Specification size/quantity /pcs Specification standard ceraic 32 DIN 861/1 611, ceraic 47 DIN 861/ , ceraic 87 DIN 861/ , ceraic 103 DIN 861/ ,44 Brinell agnifying glass Magnification / ht x8 0,1 67, x10 0,1 67, x12 0,1 67,40 Watchakers agnifying glass Magnification / ht x3 32, x4 32,29 Hardness gauge Poldi-Tester / ht Specification HB hardness 267,11 6

8 Universal bevel protractor with agnifying glass, with 4 rules (80, 150, 195 a 300) PN Angle /1093.ht ' o 72,73 Universal bevel protractor with agnifying glass, with 4 rules (80, 150, 195 a 300) Angle / ht " o 165,98 Protractor PN Diendions /1089.ht x200 11, x290 15, x400 16, x393 17, x650 27,45 Protractor for carpenters Diendions / ht o 500x500 24,51 Wooden protractor Digital Diendions / ht " 254x254 41,14 Wooden protractor 9002 Specification Diendions /9002.ht , 45, 60, 90 o 250 3,16 Wooden angle holder 9001 Specification Diendions /9001.ht x100x60 2, x100x80 3,05 7

9 Wooden arking gauge 9003 Diendions /9003.ht x100 4,52 Welding gauge PN Angle / ht 1120 Analog 0,1 50,60,115,120 o , Analog 0,1 60,70,80,90 o , Digital 0,01 60,70,80,90 o ,90 Twist drill grinding gauge 1121 /1121.ht , 50, 60, 70, 80, 90, 100, 110, 120, 130, 140 o 15,71 Feeler gauge set DIN Thickness Diendions No. of blades /1131.ht Separete gauges available ,02-0, , , , , , ,82 Non-agnetic Feeler gauge set DIN 1544 F 1129 Thickness Diendions No. of blades /1129.ht , ,29 Feeler gauge tape /D Thickness Diendions /1134.D.ht /D 0, x13 30, /D 0, x13 26, /D 0, x13 8, /D 0, x13 9, /D 0, x13 9, /D 0, x13 9,90 8

10 /D Size Diendions /1134.D.ht /D 0, x13 9, /D 0, x13 9, /D 0, x13 9, /D 0,1 5000x13 9, /D 0, x13 9, /D 0, x13 9, /D 0, x13 9, /D 0,2 5000x13 9, /D 0, x13 9, /D 0,3 5000x13 9, /D 0, x13 9, /D 0,4 5000x13 9, /D 0,5 5000x13 9, /D 0,6 5000x13 9, /D 0,7 5000x13 9, /D 0,8 5000x13 9, /D 0,9 5000x13 9, /D x13 9,90 Feeler gauge tape - set 1134 Angle Diendions No. of blades /1134.ht Contens: 0,01/0,02/0,03/0,04/0,05/0,06/0,07/0,08/0,09/0,10/0,12/0,15/0,18/0,20/0, ,01-0, x ,27 Srcew pitch gauge etric /1123.ht ,84 Radius gauge set ČSN Radius No. of blades /1140.ht , ,5-1, , , ,40 Screw pitch gauge ČSN Metric, ČSN Whitworth 1146 Pitch No. of blades Specification /1146.ht , Metric 3, Whitworth 5, , Whit.+Metr. 6,34 9

11 Stands, indicators, support props Magnetic stand PN Specification Work agnetic force /1150.ht 1150 wooden box ,73 Magnetic stand with central locking PN Specification Work agnetic force / ht large , econo , elastic ,67 Magnetic stand PN Work agnetic force /1151.ht ,59 Dial gauge stand PN /1152.ht ,28 Dial gauge stand /1153.ht ,33 Magnetic stand with central locking Work agnetic force / ht ,31 Holder for icroeter 1160 /1160.ht ,03 10

12 Dial gauge ČSN EN ISO (ČSN ) TOP QUALITY RECOMMENDED for certification Diaeter / ht , ,58 Dial gauge ČSN EN ISO (ČSN , ) 1155 Diaeter /1155.ht , , , , , , , , , ,14 Digital gauge - NEW DESIGN Diaeter / ht , , , ,32 Dial gauge ČSN EN ISO (ČSN ) with lug Diaeter / ht , ,83 Dial test indicator ČSN EN ISO (ČSN ) - horizontal 1156 Diaeter /1156.ht 1156 (+/-) 0,8 0, ,88 Dial test indicator ČSN EN ISO (ČSN ) - vertical Diaeter / ht (+/-) 0,8 0, ,90 Probe tips for indicators / ht Specification No. of blades M 2,5 22 7,60 11

13 Support props for general use ČSN (ČSN ) 3035 Specification Capacity /3035.ht 3035 set of heads N 59, set of heads N 91, set of heads N 150,93 Support props with tip ČSN (ČSN ) 3034 Specification /3034.ht head 63 40,38 Fir joint calipers, depth calipers Inside spring caliper ČSN /2016.ht , , , ,15 Vernier depth caliper ČSN , DIN /2035.ht ,02 16, ,02 20, ,02 32,78 Vernier depth caliper with nose ČSN , DIN /2040.ht ,02 20, ,02 23, ,02 24, ,02 40,73 12

14 Digital depth caliper, DIN /2047.ht ,01 36, ,01 40, ,01 63, ,01 82,30 Digital depth caliper with onoblock nose, DIN 862 RECOMMENDED for certification / ht ,01 45, ,01 46, ,01 61, ,01 164,82 Digital depth caliper, screwed nose, DIN /2051.ht ,01 32, ,01 41, ,01 50, ,01 109,17 Vernier depth caliper with contraction DIN 862 (three contraction scales +, all the contraction available) 13

15 Marking gauges, height gauges, scribers, pencils Spring bow divider ČSN Diension /2070.ht , , , ,62 Marking gauge without graduation, fine adjustent, stainless steel 2074 Diension /2074.ht / ht On request available up to 3000, without fine adjustent , extension , , extension ,57 Bea trael with graduation, fine adjustent DIN Diension /2078.ht On request available up to ,1 73, ,1 94, ,1 244, ,1 303,98 Surface gauge Diension /3002.ht , ,01 Vernier height gauge ČSN DIN Diension /3013.ht On request reading 0,05 available ,02 76, ,02 124, ,02 160, ,02 415,83 14

16 Digital height gauge ČSN DIN Diension /3022.ht ,01 288, ,01 302, ,01 405, ,01 423,02 Innovation , ,11 Scriber ČSN Diension /3025.ht ,49 Scriber ČSN Diension /3026.ht ,39 Scriber, carbide point Diension / ht ,64 Carpenter pencil hardness 1, type 9030 Model Hardness /9030.ht , , ,45 Pencil for stone 9035 Model Purpose /9035.ht stone 180 0, glass, sheet etal 180 0,40 15

17 Tap holders, die holders Tap holder ČSN For taps /3042.ht ,5 M2 - M7 4, ,5-7,1 M3 - M12 5, ,15-6,3 M4 - M11 5, ,55-9 M6 - M14 7, ,60-16 M9 - M27 16, M11 - M30 27, ,5 M24 - M52 46,21 Tap extension ČSN Diension / ht , , , , , , , , , , , , ,61 Die holder ČSN Diaeter For dies /3052.ht Innovation M1 - M2,5 2, M3 - M6 2, M7 - M9 3, M10 - M11 3, M12 - M15 4, M16 - M20 6, M22 - M26 10, M27 - M36 14, M39 - M42 27, M45 - M52 31,59 16

18 Squares ČSN and DIN, triangels Knife edge square, E ČSN Thickness Diensions /4003.ht On request available up to ,3/10,3 63x , ,5/10,5 100x , ,5/18/12,4 160x ,05 Innovation /20 200x ,94 Innovation /20 250x ,00 Knife edge square, DIN Thickness Diensions / ht On request available up to ,7/3,7 25x , ,7/3,7 40x , ,7/4,7 75x , ,7/5,6 100x , ,6/7,8 200x , ,6/8,6 250x ,25 Carpenter square ČSN Thickness Diensions /4028.ht ,4/5 400x230 IV. 9, ,4/5 750x375 IV. 10, ,4/5 1000x375 IV. 14,11 Carpenter square, PN graduation Diensions / ht Innovation x230 IV. 10,67 Innovation x375 IV. 12,29 Innovation x375 IV. 14,95 17

19 Workshop flat square PN Thickness Diensions /4011.ht x63 IV. 4, x100 IV. 6, x160 IV. 8, x250 IV. 16, x400 IV. 34, x375 IV. 37, x500 IV. 44,17 Workshop square with base PN Thickness Diensions /4021.ht x63 IV. 9, x100 IV. 11, x160 IV. 15, x250 IV. 27, x400 IV. 56, x375 IV. 58, x500 IV. 60,60 Zinc coated square Thickness Diensions / ht Manufacurer standard Innovation x5 100x70 Workshop 7,80 Innovation x5 150x100 Workshop 10,08 Innovation x5 200x130 Workshop 12,00 Innovation x5 250x160 Workshop 13,48 Innovation x5 300x180 Workshop 16,23 Innovation x5 400x230 Workshop 20,08 Innovation x5 500x280 Workshop 23,75 Innovation x5 600x330 Workshop 42,19 Innovation x5 750x375 Workshop 46,29 Innovation x5 1000x500 Workshop 54,00 Flexible squares with graduation in ČSN Thickness Diensions /4031.ht On request all diensions, 45, etc available /13,5 200x125 IV. 15, /13,5 250x155 IV. 22,56 18

20 Precision flat square, Au ČSN Thickness Diensions /4036.ht x40 2 5, x63 2 6, x , x , x , x , x , x , x , x ,71 Precision flat square, hardened, A ČSN Thickness Diensions /4047.ht x40 2 9, x , x , x ,68 Precision square with base, Bu ČSN Thickness Diensions /4053.ht x40 2 8, x , x , x , x , x , x , x , x , x ,64 Precision square with base, hardened, B ČSN Thickness Diensions /4060.ht x , x , x , x ,19 19

21 Centre square Diensions / ht x70/90 29, x130/180 32, x150/210 41, x180/250 63,29 Flange square Thickness Diensions / ht x5 300x , x5 400x , x5 500x , x5 600x , x5 800x ,84 Precision glazier square 4070 Thickness Diensions /4070.ht Available on request until odel IV. 43, odel IV. 61,04 Wooden square hobby 4065 Diensions /4065.ht x130 IV. 1, x200 IV. 2, x250 IV. 3,14 Triangel ČSN Angle Diensions /4080.ht o 250 x 250 IV. 17,71 Triangel ČSN Angle Diensions /4085.ht Squares over 500 available on request Different angle of squares (45, 60, 120, 135 ) available on request o 250 x 140 IV. 16,44 20

22 Spirit levels - workshop, bricklayers, carpenters 3 vials spirit levels with agnets / ht / 7, / 8, / 9, / 11, / 11, / 16, / 20,37 3 vials spirit levels with agnets - PROFFESIONAL / ht / 7, / 8, / 9, / 11, / 11, / 16, / 20,37 Digital level, 2 vials / ht / ht , ,1 o 300 (+/-0,2 o ) 56, ,1 o 600 (+/-0,2 o ) 58, s lasero, 0,1 o 600 dosah ,83 Pocket digital level / ht / ht ,1 o 50x50 44, ,1 o 65x50 48,51 Plastic vial Different vials on request Diensions / ht Innovation x15x15 0,71 21

23 Hose level 5036 Specification /5036.ht 5036 Pair plastic 1, Set 10 8, Set 15 10,66 Set contains rubber hose, two hose levels and anual. Plub line in / ht etal 3 6, etal 6 8, etal 8 10,78 22

24 Precision levels Longitudinal spirit level 0.02 ČSN /1 Diensions /5050.ht Supplied in luxury woodden case ,02 150x42x40 103, ,02 200x42x40 123, ,02 250x42x40 125, ,02 300x42x40 134, ,02 400x42x40 186,53 Longitudinal spirit level ČSN /1 Diensions /5080.ht Supplied in luxury woodden case ,11-0,2 100x100x25 89, ,11-0,2 150x150x43 104, ,11-0,2 200x200x43 119, ,11-0,2 300x300x42 143,17 Frae spirit level 0.02 ČSN /1 Diensions /5096.ht Supplied in luxury woodden case ,02 150x150x44 167, ,02 200x200x44 181, ,02 250x250x44 213, ,02 300x300x44 222,06 Cross short level ČSN /1 Diensions /5110.ht Supplied in luxury woodden case ,11-0,2 100x40x32 71, ,11-0,2 150x40x32 74,98 Longitudinal spirit level, prisatic base ČSN /1 Diensions /5115.ht Supplied in luxury woodden case ,11-0,2 150x42x40 64, ,11-0,2 200x42x40 74, ,11-0,2 250x42x40 78, ,11-0,2 300x42x40 114, ,11-0,2 400x42x40 117,56 23

25 Calipers Forester caliper PN /jaws /1161.ht /255 42, /410 50, /410 63,38 Vernier caliper with locking screw and depth rod ČSN , DIN /jaws Frae / ht ,02 150/40 screwed nonius 13, ,05 +inch 150/40 screwed nonius 12, ,02 +inch 150/40 onoblock 14, ,02 +inch 160/40 onoblock 15, ,05 +inch 160/40 onoblock 15,08 Vernier caliper with locking device and depth rod ČSN , DIN /jaws Frae / ht ,05 +inch 70/40 onoblock 16, ,02 +inch 150/40 onobl., NOX 15, ,05 +inch 150/40 onobl., INOX 15, ,02 +inch 160/40 onobl., INOX 15, ,05 +inch 160/40 onobl., INOX 15,10 Vernier caliper with locking screw and depth rod DIN 862 LEFT HAND! /jaws Frae / ht ,05 150/40 onoblock 17,40 Vernier caliper with locking screw and depth rod, fine adjustent ČSN , DIN /jaws Frae /6002.ht ,02 200/50 screwed nonius 20, ,02 300/55 screwed nonius 28,34 24

26 Dial caliper with depth rod, ČSN , DIN /jaws Frae /6013.ht ,02 150/40 INOX 16, ,02 200/45 INOX 20, ,02 300/55 INOX 30,88 Vernier caliper with locking screw, fine adjustent ČSN (ČSN ), DIN /jaws Frae /6015.ht ,02 500/100 screwed nonius 117, ,02 500/125 screwed nonius 120, ,02 500/150 screwed nonius 133, ,05 500/200 onoblock 484, ,02 600/100 screwed nonius 157, ,02 600/125 screwed nonius 161, ,02 600/150 screwed nonius 182, ,05 600/200 onoblock 619,72 Innovation ,05 600/300 onoblock 718, ,02 800/125 screwed nonius 224, ,05 800/150 screwed nonius 287, ,05 800/200 onoblock 724, , /125 screwed nonius 307, , /150 screwed nonius 327, , /200 onoblock 352, , /125 screwed nonius 379, , /150 screwed nonius 396, , /200 screwed nonius 442, , /125 screwed nonius 608, , /150 screwed nonius 617, , /200 screwed nonius 697, , /300 screwed nonius 770,83 Vernier caliper with locking screw, fine adjustent ČSN (ČSN ) DIN /jaws Frae / ht ,02 600/125 onoblock 170, ,02 800/150 onoblock 287, , /150 onoblock 364,58 25

27 Vernier caliper with upper jaws, locking screw, fine adjustent ČSN , DIN /jaws Frae / ht ,02 500/100 screwed nonius 123, ,02 500/125 screwed nonius 141, ,05 500/150 screwed nonius 154, ,02 600/100 screwed nonius 152, ,02 600/125 screwed nonius 164, ,05 600/150 screwed nonius 179, ,02 800/125 screwed nonius 255, ,05 800/150 screwed nonius 273, , /125 screwed nonius 309, , /150 screwed nonius 332, , /125 screwed nonius 408, , /150 screwed nonius 419, , /200 screwed nonius 481, , /125 screwed nonius 750, , /150 screwed nonius 760, , /200 screwed nonius 810,00 Digital caliper NO NAME 6040 /jaws /6040.ht ,01 150/40 29,11 Digital caliper solar NEW /jaws Innovation /40 29,12 / ht Digital caliper DIN 862, BIG DISPLAY - NEW MODEL! /jaws / ht ,01 81/30 35, ,01 150/40 47, ,01 200/50 66, ,01 300/60 95,73 26

28 Digital caliper with output for PC DIN NEW MODEL! /jaws / ht ,01 150/40 63, ,01 200/50 78, ,01 300/60 130,03 Digital caliper DIN /jaws / ht ,01 500/ , ,01 500/ , ,01 600/ , ,01 800/ , ,01 800/ , , / , , / ,63 Digital caliper with upper jaws DIN /jaws Frae / ht ,01 500/100 with upper jaws 284, ,01 500/125 with upper jaws 329, ,01 600/100 with upper jaws 410, ,01 800/125 with upper jaws 442, ,01 800/150 with upper jaws 460, , /150 with upper jaws 691,47 Moisture resistant digital caliper IP /jaws Frae / ht ,01 150/40 IP65 76, ,01 200/50 IP65 95, ,01 300/60 IP65 159,24 Protection IP 65 Moisture resistant digital caliper IP /jaws Frae / ht Protection IP ,01 150/40 IP67 90, ,01 200/50 IP67 123,50 27

29 Digital unit horizontal type / ht , ,32 Innovation , ,00 Innovation , ,42 Innovation , ,70 Innovation , ,56 Innovation , ,84 Digital unit vertical type / ht , ,54 Innovation , ,41 Innovation , ,19 Innovation , ,02 Innovation , ,89 Innovation , ,18 Spare battery Model / ht SR44 1,55V 0,81 Plastic caliper hobby 6050 /jaws Frae /6050.ht ,1 150/40 plast 1,74 28

30 Microeters Outside icroeter ČSN , DIN /7002.ht 7013 /7013.ht 7019 /7019.ht / ht 7027 /7027.ht , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,59 Screw thread icroeter DIN 863, without anvils / ht Innovation , ,67 Innovation , ,56 Innovation , ,31 Innovation , ,21 V-shaped and knife anvils, etric thread Metric thread / ht Innovation o Pitch 0,4-0,5 13,24 Innovation o Pitch 0,6-0,9 13,24 Innovation o Pitch 1-1,75 13,24 Innovation o Pitch ,24 Innovation o Pitch 3,5-5 13,24 Innovation o Pitch 5,5-7 13,24 29

31 Digital outside icroeter DIN /7030.ht , , , , , , , , , , , ,19 Digital thickness gage / ht , , , ,14 Tube icroeter ČSN , DIN /7041.ht , ,88 Wire icroeter ČSN /7043.ht , ,13 Disc ikroeter ČSN , DIN /7051.ht , , , ,71 Another diension available on request Internal jaw icroeter ČSN , DIN /7095.ht , , , , , , , ,98 30

32 3-point internal icroeter set with setting rings DIN Contains , Contains: 6-8, 8-10, 10-12; Setting ring: 8, ,50 / ht On request available another sizes or individual heads , Contains: 11-14, 14-17, 17-20; Setting ring: 11, , Contains: 20-25, 25-30, 30-35, 35-40; Setting ring: 25, , Contains: 40-50, 50-60, 60-70, 70-80, 80-90, ; Setting ring: 50, 70, ,62 613, ,55 3-point internal icroeter DIN / ht , , , , , , , , , , , , , , , , , , , , , , , , , , , ,73 Setting ring DIN 2250 C Diaeter /90649.ht , ,28 Another sizes of rings you find in part GAUGES 31

33 Dial bore gauge with dial indicator DIN Specification / ht , Analog 76, , Analog 62, , Analog 67, , Analog 107, , Analog 101, , Analog 108, , Analog 127, , Analog 129,94 Dial bore gauge with digital indicator DIN Specification / ht , digital 81, , digital 76, , digital 89, , digital 121, , digital 140, , digital 145, , digital 159, , digital 174,10 Dial bore gauge with dial indicator DIN Specification / ht Digital gauge available on request , Analog 120, , Analog 127, , Analog 129, , Analog 133,80 Indicator icroeter DIN /7126.ht , , , , , , , , , ,46 32

34 Depth easureent icroeter ČSN , DIN /7103.ht , ,58 Microeter head DIN /7120.ht , ,60 Internal easureent icroeter ČSN , DIN /7125.ht of extensions: 13, 25, 50, 100, 150, , ,74 Saw setting gauge 7099 /7099.ht , ,50 33

35 Folding rules, easuring tapes, long tapes Measuring tape Kinex ČSN (ČSN ) 8001 lenght width /8001.ht Recoended for ISO standard certificate , , ,20 Measuring tape Kinex special ČSN (ČSN ) - NEW MODEL lenght width / ht , , , ,64 Measuring tape FESTA 8044 specification lenght width /8044.ht with agnet on hook , with agnet on hook , with agnet on hook ,49 Steel tape with graduation for achines lenght width / ht On request supplied with adhesive tape ,08 Measuring tape for internal easureent lenght width / ht , ,30 34

36 Tailor tape 8073 lenght width /8073.ht ,40 Circuference tape 8005 lenght width /8005.ht ,46 Measuring tape KINEX Hobby Pink lenght width / ht , , , ,5 19 1,60 Long steel tape KINEX ČSN NEW MODEL 8011 lenght width /8011.ht Recoended for ISO standard certificate , , , , ,35 Long steel tape with handle KINEX ČSN lenght width /8021.ht , ,28 Recoended for ISO standard certificate Measuring tape KINEX BLUE lenght width / ht , , ,5 25 3,27 35

37 Measuring tape Johnney 8040 Width /8040.ht , , , ,5 19 4,14 Fiberglass long tape Koelon 8045 Width /8045.ht , , , ,15 Fiberglass long tape with handle Koelon Width / ht , , ,60 Long steel tape Koelon 8055 Width /8055.ht , , ,89 Measuring wheel Specification 8057 analog ,13 Innovation digital ,16 /8057.ht 36

38 Telescopic easuring staff 1054 /1054.ht , ,00 Telescopic easuring staff in. / ht Innovation , ,90 Innovation , ,00 Innovation , ,87 Wooden folding rule 1 ČSN Width /8060.ht ,76 Wooden folding rule 2 ČSN Width /8065.ht ,99 Plastic folding rule Width /8070.ht ,02 Plastic folding rule Width /8071.ht ,96 Prootional printing On custoer s request /reklani.ht 37

39 Laser progra Square Laser / ht More infor on /laser.pdf /- 3 (10) 54,37 Proffesional tripoid / ht ,38 More infor on /laser.pdf Tripoid for cross laser liner / ht Innovation ,38 Laser distancer LE-20 A / ht / ,88 More infor on /laser.pdf Multiscanner Zircon pre SL Specification / ht Innovation Find out etal, wood, wires 45,39 More infor on /skener.pdf Laser distancer D / ht ,5 190,47 More infor on /distancer.pdf 38

40 Dĺžkoer laserový D / ht Innovation ,5 225,00 Target A4 210x / ht ,25 Target cross 73x98/147x / ht ,50 Protection glasses / ht ,19 39

41 Levels Autoatic level R Magnification / / ht x 2/ ,93 Autoatic level NA Magnification / / ht x 2,5/ ,54 Proffesional tripoid CTP / ht ,50 Levlling staff 4 with vial / ht ,50 More infor on /niveláky.pdf 40

42 Gauges Setting ring DIN 2250C Diaeter /90628.ht , ,5 53, , ,5 34, , , , , , , , , ,5 35, , , , , , ,5 35, , , , , , , , , , , , , , , , , , , , , , , , ,94 41

43 90628 Diaeter /90628.ht , , , , , , , , ,73 Plug gauge DIN 7162, DIN 7164 Other tolerances available on request Diaeter /90664.ht H 7 17, H 7 17, H 7 18, H 7 18, H 7 18, H 7 16, H 7 16, H 7 16, H 7 16, H 7 16, H 7 16, H 7 16, H 7 16, H 7 16, H 7 19, H 7 19, H 7 19, H 7 20, H 7 20, H 7 20, H 7 20, H 7 20, H 7 20, H 7 24, H 7 24, H 7 24, H 7 24, H 7 24, H 7 27, H 7 27, H 7 27, H 7 27, H 7 27, H 7 27,83 42

44 90664 Diaeter /90664.ht H 7 27, H 7 35, H 7 35, H 7 35, H 7 41, H 7 41, H 7 41, H 7 41, H 7 41, H 7 48, H 7 48, H 7 48, H 7 55, H 7 55, H 7 63, H 7 Pair 63, H 7 Pair 68, H 7 Pair 68, H 7 Pair 80, H 7 Pair 80,11 Thread plug gauge GO/NOGO Other tolerances available on request Diaeter /90715.ht M2-6H 45, M2,5-6H 44, M3-6H 44, M3,5-6H 44, M4-6H 37, M5-6H 37, M6-6H 37, M8-6H 37, M10-6H 39, M12-6H 39, M14-6H 41, M16-6H 41, M18-6H 42, M20-6H 42, M22-6H 46, M24-6H 46, M27-6H 46, M30-6H 53, M33-6H 53, M36-6H 66, M42-6H 81, M45-6H 81, M48-6H 86,99 43

45 Thread ring gauge GO Other tolerances available on request Diaeter /90736.ht M2-6g 51, M2,5-6g 47, M3-6g 42, M3,5-6g 42, M4-6g 42, M5-6g 42, M6-6g 40, M8-6g 42, M10-6g 46, M12-6g 42, M14-6g 44, M16-6g 44, M18-6g 48, M20-6g 48, M22-6g 58, M24-6g 58, M27-6g 58, M30-6g 74, M33-6g 74, M36-6g 80, M42-6g 103, M45-6g 103, M48-6g 118,42 Thread ring gauge NOGO Other tolerances available on request Diaeter /90759.ht M2-6g 51, M2,5-6g 47, M3-6g 42, M3,5-6g 42, M4-6g 42, M5-6g 42, M6-6g 38, M8-6g 40, M10-6g 41, M12-6g 38, M14-6g 40, M16-6g 40, M18-6g 42, M20-6g 42, M22-6g 44, M24-6g 44, M27-6g 44,37 44

46 90759 Diaeter /90759.ht M30-6g 51, M33-6g 51, M36-6g 65, M42-6g 80, M45-6g 80, M48-6g 92,54 Snap gauge DIN 2230 Please specify the tolerance with order Diaeter /90836.ht , ,5 106, , ,5 106, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,69 45

47 90836 Diaeter /90836.ht , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,09 Liit snap gauge GO/NOGO DIN 2231 Please specify the tolerance with order Diaeter /90964.ht , ,5 135, ,8 135, , ,5 106, , ,5 106, , , , , , ,65 46

48 90964 Diaeter /90964.ht , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,96 47

49 90964 Diaeter /90964.ht , , , , , , , ,09 list is valid fro until the eission of new catalogue. Printing erros stipulated. 48

50