Propeller Equipment Sale. For Questions please contact Dan Cork

Transcription

1 Propeller Equipment Sale For Questions please contact Dan Cork

2 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers.

3 Propeller Equipment Sale You will notice that generic equipment is not listed such as a Hydraulic press, Drill Press, Arbor Press, bead blast cabinet, measuring tools & cleaning equipment. All of the above equipment and then some would be required for repair and overhaul.

4 Propeller Equipment Sale Other equipment will be required for repair and overhaul of propellers such as a Rolling Machine, optical comparator and various other special equipment. You would need to acquire this equipment elsewhere or have some operations farmed out (out sourced).

5 Eddy Current inspection NDT Equipment 8 piece Eddy Current Probe kit

6 NDT Equipment ZB 100 Black Light All Zyglow inspection

7 NDT Equipment ED 520 Eddy Current Eddy Current inspection

8 NDT Equipment Tri-Con Nozzle Used to rinse excess penetrant off of part

9 NDT Equipment Field Indicator Used to check for residual magnetism

10 NDT Equipment Magnaflux Gauge Used to calibrate equipment

11 All Propellers 2 each Angle adjustment tool Blade angle adjustment bar

12 Arbor for balancing spline propellers. All Propellers 2 each Balance Arbor Used in conjunction with the static balancer. This arbor has 2 removable flanges. 1 for recips and 1 for turbine flanges.

13 All Propellers Blade Grinding & Polishing Equipment Flex Shaft Grinder, Vertical Blade shank polishing motor & Complete set of fixtures to hold Hartzell & McCauley blades during grinding operations.

14 All Propellers Blade paddle Wood construction

15 All Propellers Blade Rack Storage for blades made of wood and portable with caster wheels.

16 All Propellers Face Alignment Tool Face alignment adjustment bar

17 All Propellers Propeller Table 7' x 14" steel table with fixture hole for checking blade angles & straightening.

18 All Propellers Static Balancer Made by the Stuhr Company

19 All Propellers Blade Master Balancer For master balancing blades in a set. Used in conjunction with the static balancer.

20 All Propellers 2 each Stud alignment fixtures For aligning studs during the cure process

21 All Propellers Universal Bubble Protractor Measure blade angles on all Props.

22 All Propellers Paint Protection Covers Various covers for protecting hubs, and cylinders from paint.

23 All Propellers Aluminum drift For compacting lead wool into blades for master balance

24 Used to remove and clean out blade balance holes. All Propellers 4 piece Lead wool removal kit

25 All Propellers 4 piece blade shank drill guide kit Used in conjunction with lead wool removal kit.

26 All Propellers Misc. Adaptors Used for different blades during master balance

27 All Fix Pitch Fix Pitch Arbor Used in conjunction with the static balancer to static balance fix pitch propellers.

28 All Fix Pitch 2 each Prop Fixtures For checking, adjusting angles and grinding of fix pitch props.

29 All Fix Pitch Paint Stand For painting fix pitch props.

30 All 20 spline props 20 spline fixture Used with prop table for checking angles for propellers with 20 spline shaft

31 All 30 spline props 30 spline fixture Used with prop table for checking angles for propellers with 30 spline shaft

32 All 40 spline props 40 spline fixture Used with prop table for checking angles for propellers with 40 spline shaft

33 All Splined and Fix Pitch Sutton 3A100 Suspension Balancer Balance splined type propellers

34 All recip/lyc & Cont. Table prop fixture Fixture for ops checking props, blade angles, leak check etc.

35 All recip/lyc & Cont. Balance Arbor Fixture Used in conjunction with the static balancer

36 All turbine Eng. Prop Balance Arbor Fixture Used in conjunction with the static balancer

37 All turbine Eng. Prop Table prop fixture Fixture for ops checking props, blade angles, leak check etc.

38 Hamilton Standard Cylinder Press Tool Set For installing new cylinder liners in a 20, 30 & 40 spline propellers.

39 Hamilton Standard Torque Bar Wrench Used to torque prop on to engine

40 Hartzell 1 13/16" Box Wrench Used to remove dome nuts on Hartzell full feathering propellers

41 Hartzell 1 7/16" Box Wrench Used to remove dome nuts on Hartzell full feathering propellers

42 Hartzell 6 Piece bearing Press tool set Various pressing tools for pressing bearing cups into various different Hartzell blade shanks.

43 Used for alignment of turbine spinner support plate. Hartzell Alignment Fixture

44 Hartzell 1 each Bearing Press tool Used to press on blade bearings to steel hub assemblies

45 Hartzell Bearing Press tool set Used to press the BCE 2020 bearing Cups into Y shank blades

46 Used to remove Blind bearing cups in "Y"shank blades Hartzell Bearing Removal Tool

47 Hartzell 2 each Bearing Removal Tool Used to remove bearing cups from blade shanks

48 Hartzell Clamp Nut Tool Used to hold the clamp nut on clamp assemblies

49 Hartzell Cylinder Tool Used to assemble & disassemble steel hub cylinders.

50 Hartzell 2 each Cylinder Tool Used to assemble & disassemble compact hub cylinders.

51 Hartzell Slip Ring Fixture Used to support Turbine Slip rings during the machining process

52 Hartzell 2 each Spring Compressor This unit is used in conjunction with a hydraulic press Used to assemble & disassemble spring kits contained in lower hub half

53 Hartzell 2 each Spring Compressor Used to assemble & disassemble spring kits contained in Cylinder domes

54 Hartzell 3 each Spring Compressor Used to Assemble Turbine Guide rod springs

55 Hartzell Spring Compressor Used to assemble & disassemble Full feathering & turbine Steel Hub spring kits

56 Hartzell Torque Adaptor Used to install and torque the piston rod in compact hubs

57 Hartzell & McCauley Stud Height gauges Used to set proper height of mounting studs

58 McCauley 2 piece reamer kit Used to ream latch arm bushings

59 McCauley Assembly Fixture Used to assemble 3 bladed Piston Assemblies

60 McCauley Bearing press tool For installing bearings in Threadless props

61 McCauley Blade shank fixture Used to modify Threadless blade shanks to oil filled

62 For setting blade friction in threaded hub assemblies McCauley Blade Shim fixture

63 McCauley Blade Shim fixture For shimming 2 blade and 3 blade threadless props

64 McCauley Blade Vise Used to hold McCauley blades during ferrule installation

65 McCauley Clamps For holding spanner wrench firm against retention nut during the installation process on 3 bladed propellers.

66 McCauley Drill & Tap Kit For drilling Blade ferrules

67 McCauley Drill & Tap Kit Used to drill & tap the oil fill hole on hubs

68 McCauley Universal Drill guide fixture For drilling all McCauley blade ferrules

69 For drilling lock holes in retention nuts McCauley Drill Kit

70 McCauley Ferrule Torque Bar 11 foot torque bar for installing blade ferrules

71 McCauley Ferrule Wrenches Used to assemble & disassemble blade ferrules

72 McCauley Gauge For pressure checking oil filled hubs

73 McCauley Latch Plate Fixture Used to modify latch plates on oil filled models

74 McCauley Misc. wrenches Misc. Wrenches

75 McCauley Removal & Installation kit Used to install and remove plugs from oil filled threadless shanks

76 McCauley Retention Nut Fixture Used to modify retention nuts to the oil filled version

77 McCauley Retention Nut Torque Bar For installation and torque of Retention nuts on 3 bladed propellers

78 McCauley 2 each Snap ring Pliers For releasing blade snap rings

79 McCauley 3 each Spanner Wrenches For removing & installing threaded blade assemblies

80 McCauley 2 each Spring Compressor For assembly & disassembly of Full Feathering Spring assemblies

81 McCauley Two Propeller work stand Used to assemble and disassemble propellers