Panel Carts refer Page Intex Price Guide All prices are exclusive of GST

Transcription

1 Panel Carts refer Page Intex Price Guide All prices are exclusive of GST

2 Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy loading, walls and cathedral ceilings Compact three stage telescoping section Folding tripod base provides wide sturdy base Panellifter Sheet capacity 4.8m (Extension for 6.0m available) Max Height 3350mm (Extension to 4570mm available) Durable welded steel construction Spare parts available Tripod legs fold to allow assembled unit to pass through doorways 127mm easy rolling castors Backstop legs Easily portable components assembles in seconds with no tools required Cradle tilts laterally for easy loading and operation Supports sheets on wall up to 3350mm (ext. to 4570 available) Reaches ceilings up to 3350mm (ext. to 4570 available) Panellift loading and lifting system - the true one person operation Ready for use with loader attached to lifter and sheet on Cart Loader lifting sheet from Cart to Lifter Loading complete ready to lift! Tools & Equipment All prices are exclusive of GST Intex Price Guide 137

3 PRODUCT CODE DESCRIPTION PRICE CARTON CARTON EACH QTY PRICE EA. PA N E L L I F T E R S, E T C. Used to lift and position plasterboard sheets onto walls or ceilings. Strong welded construction which disassembles easily for transport. Standard unit has load capacity of 68Kg and lifts 4.8m long sheets to 3350mm high. Tripod legs fold inward so unit can pass through doorways. Cradle tilts laterally for easy loading and is spring loaded to horizontal position. It also tilts longitudinally to 10 for sloping walls or ceilings. Has three large, easy rolling 125mm castors. PL164 Panellift Plasterboard Lifter POA Specially designed for Australian Plasterboard sheet sizes. These sturdy extension arms fit into Panellift outriggers enabling proper handling of sheets up to 6m long. PL166 Panellift Extension Arm Kit to Hold 6m Sheets POA Special telescoping section fits onto Panellift enabling it to lift to 4570mm. PL167 Panellift 1200mm Extension to Lift to 4570mm POA Ecomonical fixed extension bar fits onto Panelift increasing optimum reach height by 300 or 450mm. This also increases initial loading height PLE12 Panelift Extension Pole 300mm POA PLE18 Panelift Extension Pole 450mm POA An innovative loader that attaches to Panelift and picks up plasterboard at floor level! This eliminates bending, stooping and back strain and enables genuine one man operation to hang sheets. Can be also used to lift sheets off Panelift Cart (CD136) thereby reducing loading and unloading time. PL170 Panellift sheet loader POA Other Sheet Lifters and Panel Carrying Items on Page 147 PA T C H M A C H I N E Refer Hoppers Section Page 120 P E N C I L S, C R AY O N S A N D A C C E S S O R I E S Hi-visibility carpenter pencil with medium grey lead. PC148 Carpenters Pencils-medium Quality lumber crayon for permanent, waterproof marking on plaster, timber, concrete, steel, etc. Standard colours - blue. Other colours available on request. PC003 Lumber Crayons A compact sharpener specifically designed for sharpening carpenters pencils to a clean sharp point. Provides a much safer, faster and more consistent result than using a knife or chisel. PS101 Carpenters Pencil Sharpener A unique new product that attaches a carpenters pencil to any flat sided tape measure. Makes marking parallel lines, multiple markings, arcs and circles incredibly easy. Just lock tape and mark with one handed operation. PRICING NOT CURRENT NEW CATALOGUE UNDER CONSTRUCTION PB003 Pencil Boy - Tape Measure Pencil Holder Intex Price Guide All prices are exclusive of GST

4 PRODUCT CODE DESCRIPTION PRICE CARTON CARTON EACH QTY PRICE EA. PLANKS Aluminium planks with welded ends and four bold knurled ribs on top and bottom face to assist gripping. All planks are manufactured with internal stiffening webs to ensure strength and impact resistance. PL020 Aluminium Planks mm poa PL025 Aluminium Planks mm poa PL030 Aluminium Planks mm poa PL040 Aluminium Planks mm poa PL050 Aluminium Planks mm poa PL060 Aluminium Planks mm poa As above with Rubber Friction Strips. PL030.R Aluminium Planks with Rubber Strips mm poa PL040.R Aluminium Planks with Rubber Strips mm poa PL050.R Aluminium Planks with Rubber Strips mm poa PL060.R Aluminium Planks with Rubber Strips mm poa Plank Clamps available on request POLES Refer to Sanders, Poles Etc. on Page 144 PLIERS Multiple use combination pliers with serrated jaws and positive cutting edge. Has comfortable vinyl grips. P4151 Combination Pliers 200mm R I V E T P L I E R S Heavy gauge pressed steel hand riveter with comfortable vinyl grips on handles. Interchangeable nozzles to suit 2.4, 3.2, 4.0 and 4.8mm diameter rivets. Designed for quick, easy one-handed operation. RP702 PlasterX Hand Riveter R2770 Spiralux Industrial Quality Riveter R O D B E N D E R A unique tool designed to take the effort out of bending 5mm suspension rod. Heavy duty steel construction. Has pre-drilled and countersunk holes for attaching to planks. R5000 Bender for 5mm Suspension Rod RULES Long life folding rule made from a tough engineering plastic which is robust and hard wearing. Has bevelled edge for easy reading and metal tips on ends. PRICING NOT CURRENT NEW CATALOGUE UNDER CONSTRUCTION R5444 Rabone Folding Rule White 1m Tools & Equipment All prices are exclusive of GST Intex Price Guide 139

5 140 Intex Price Guide Tools and Equipment