Comparison of the Construction Curriculum Framework (2009) and CPC08 to the Construction Curriculum Framework (2004) and BGC03

Transcription

1 Framework Stage 6 Support Materials Comparison of the and CPC08 to the Framework (2004) and BGC03 Qualifications available in the HSC course CPC08 Qualification code and title (120 indicative hours) (240 indicative hours) Specialisation Study (60/120/180/240 indicative hours) Schoolbased Apprenticeship (240 indicative hours) Schoolbased Apprenticeship Specialisation (60/120/180/240 indicative hours) CPC20108 Certificate II in SOA CPC20208 Certificate II in Pathways SOA CPC20408 Certificate II in Concreting SOA CPC30108 Certificate III in Bricklaying/ Blocklaying SOA SOA SOA CPC30208 Certificate III in Carpentry SOA SOA SOA CPC30308 Certificate III in Concreting SOA CPC30608 Certificate III in Painting and Decorating SOA SOA SOA SOA CPC30808 Certificate III in Roof Tiling SOA CPC31308 Certificate III in Wall and Floor Tiling SOA SOA SOA SOA CPC31808 Certificate III in Shopfitting SOA SOA SOA SOA CPC32008 Certificate III in Carpentry and Joinery SOA SOA full qualification available through course SOA Statement of Attainment available through course qualification not available through course Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 1 of 16

2 Framework Stage 6 Support Materials Summary mapping of CPC08 Training Package qualifications to BGC03 Training Package qualifications 1 CPC08 qualification code and title Related qualification in BCG03 Relationship to previous versions CPC20108 Certificate II in BCG20103 Certificate II in General Updated qualification. Same essential outcomes. CPC20208 Certificate II in Pathways New qualification. CPC20408 Certificate II in Concreting BCG20306 Certificate II in Concreting Updated qualification. Same essential outcomes. CPC30108 Certificate III in Bricklaying/Blocklaying BCG30103 Certificate III in Bricklaying/ Blocklaying Updated qualification. Same essential outcomes. CPC30208 Certificate III in Carpentry BCG30203 Certificate III in Carpentry Updated qualification. Same essential outcomes. CPC30308 Certificate III in Concreting BCG30303 Certificate III in Concreting Updated qualification. Same essential outcomes. CPC30608 Certificate III in Painting and Decorating BCG30603 Certificate III in Painting and Decorating Updated qualification. Same essential outcomes. CPC30808 Certificate III in Roof Tiling BCG30803 Certificate III in Roof Tiling Updated qualification. Same essential outcomes. CPC31308 Certificate III in Wall and Floor Tiling BCG31303 Certificate III in Wall and Floor Tiling Updated qualification. Same essential outcomes. CPC31808 Certificate III in Shopfitting Updated qualification from BCF00 Off-Site Training Package. Has restructured packaging, using specialist joinery, shopfitting and general construction units. CPC32008 Certificate III in Carpentry and Joinery New qualification. 1 This information is drawn from the, Plumbing and Services Integrated Framework Training Package (CPC08). Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 2 of 16

3 Framework Stage 6 Support Materials Summary mapping of units of competency available in the (120) mandatory (240 & 240 SBA) (120) mandatory (240 & 240 SBA) (120) mandatory (240 & 240 SBA) (120) mandatory (240 & 240 SBA) (120) mandatory (240 & 240 SBA) mandatory (120, 240 & 240 SBA) mandatory (120, 240 & 240 SBA) CPCCCM1002A Work effectively and sustainably in the construction industry 2 CPCCCM1003A Plan and organise work CPCCCM1004A Conduct workplace communication CPCCCM1005A Carry out measurements and calculations CPCCCM2001A Read and interpret plans and specifications CPCCCM2005A Use construction tools and CPCCOHS1001A Work safely in the construction industry BCGCM1002B Work effectively in the General industry BCGCM1003B Plan and organise work BCGCM1004B Conduct workplace communication BCGCM1005B Carry out measurements and calculations BCGCM2001B Read and interpret plans and specifications BCGCM2005B Use construction tools and unit retitled and enhanced additional elements, performance criteria and assessment guidance to cover skills and knowledge in environmentally sustainable work practices Changes between 2004 and 2009 Frameworks Now in 120-hour course. Remains mandatory in 240-hour and 240-hour SBA Now in 120-hour course. Remains mandatory in 240-hour and 240-hour SBA Changed from compulsory to in 120-hour course. Remains mandatory in 240-hour and 240-hour SBA Changed from compulsory to in 120-hour course. Remains mandatory in 240-hour and 240-hour SBA Changed from compulsory to in 120-hour course. Remains mandatory in 240-hour and 240-hour SBA Remains mandatory in 120-hour, 240-hour and 240-hour SBA new unit 2 This information is drawn from the, Plumbing and Services Integrated Framework Training Package (CPC08). Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 3 of 16

4 Framework Stage 6 Support Materials mandatory (120, 240 & 240 SBA) CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry CPCCBL2001A Handle and prepare bricklaying and blocklaying CPCCBL2002A Use bricklaying and blocklaying tools and CPCCBL3001A Lay paving CPCCCA2001A Handle carpentry BCGCM1001B Follow OH&S policies and procedures BCGBL2001B Handle and prepare bricklaying and blocklaying BCGBL2002B Use bricklaying and blocklaying tools and BCGBL3001B Lay paving BCGCA2001B Handle carpentry retitled additional content regarding asbestos amended technical terms to be consistent and reflect new technology and work practices Changes between 2004 and 2009 Frameworks Remains mandatory in 120-hour, 240-hour and 240-hour SBA Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 4 of 16

5 Framework Stage 6 Support Materials CPCCCA2002A Use carpentry tools and CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground CPCCCA3002A Carry out setting out CPCCCA3003A Install flooring systems CPCCCA3006A Erect roof trusses CPCCCA3008A Construct eaves BCGCA2002B Use carpentry tools and BCGCA2003B Erect and dismantle formwork for footings and slabs on ground BCGCA3002B Carry out setting out BCGCA3003B Install flooring systems BCGCA3006B Erect roof trusses BCGCA3008B Construct eaves fire control and separation references inserted to meet OHS regulator requirements fire control and separation references inserted to meet OHS regulator requirements Changes between 2004 and 2009 Frameworks Now in 120-hour course. Remains in 240-hour, specialisation For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour, 240-hour and specialisation study Remains in SBA Now in 120-hour, 240-hour and specialisation study Remains in SBA Now in 120-hour, 240-hour and specialisation study Remains in SBA Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 5 of 16

6 Framework Stage 6 Support Materials CPCCCA3015A Assemble partitions CPCCCA3023A Carry out levelling operations CPCCCM1006A Work safely at heights CPCCCM2002A Carry out excavation CPCCCM2003A Calculate and cost construction work CPCCCM2004A Handle construction CPCCCM2006A Apply basic levelling procedures CPCCCM2007A Use explosive power tools BCGCA3015B Assemble partitions BCGCA3023B Carry out levelling operations Changes between 2004 and 2009 Frameworks Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. Remains in 240-hour, specialisation new unit May only be selected as an with written approval from school system authority or RTO. BCGCM2002B Carry out excavation Now in 120-hour course. Remains in 240-hour, specialisation May only be selected as an with written approval from school system authority or RTO. new unit BCGCM2004B Handle construction BCGCM2006B Apply basic levelling procedures BCGCM2007B Use explosive power tools Changed from compulsory to in 120- hour, 240-hour and 240-hour SBA Now in specialisation study and SBA specialisation Changed from compulsory to in 240-hour and 240-hour SBA Now in 120-hour, specialisation study and SBA specialisation May only be selected as an with written approval from school system authority or RTO. Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 6 of 16

7 Framework Stage 6 Support Materials CPCCCM2008A Erect and dismantle restricted height scaffolding CPCCCM2009A Carry out basic demolition CPCCCO2001A Handle concreting CPCCCO2002A Use concreting tools and CPCCCO2003A Carry out concreting to simple forms CPCCCO2004A Carry out concrete work CPCCJN2001A Assemble components BCGCM2008B Erect and dismantle restricted height scaffolding BCGCM2009B Carry out basic demolition BCGCO2001B Handle concreting BCGCO2002B Use concreting tools and BCGCO2003B Carry out concreting to simple forms BCGCO2004B Carry out concrete work BCF00 Off-Site Training Package BCF2013A Assemble components change to references to modular scaffolding Changes between 2004 and 2009 Frameworks Now in 120-hour course. Remains in 240-hour, specialisation May only be selected as an with written approval from school system authority or RTO. Now in 120-hour course. Remains in 240-hour, specialisation May only be selected as an with written approval from school system authority or RTO. Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 7 of 16

8 Framework Stage 6 Support Materials CPCCJN2002A Prepare for off-site manufacturing process CPCCJN3001A Use static machines CPCCJN3005A Cut and install glass CPCCPD2001A Handle painting and decorating CPCCPD2002A Use painting and decorating tools and CPCCPD2003A Remove and replace doors and door and window components BCF00 Off-Site Training Package BCF2016A Prepare for off-site manufacturing process BCF00 Off-Site Training Package BCF2001A Use static machines BCF00 Off-Site Training Package BCF3041A Cut and install glass BCGPD2001B Handle painting and decorating BCGPD2002B Use painting and decorating tools and BCGPD2003B Remove and replace door and doors and window furniture enhanced to improve sustainable work practices and resource use Changes between 2004 and 2009 Frameworks Now in 120-hour course. Remains in 240-hour, specialisation Now in 120-hour course. Remains in 240-hour, specialisation For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Now in 120-hour course. Remains in 240-hour, specialisation Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 8 of 16

9 Framework Stage 6 Support Materials CPCCPD3001A Prepare surfaces for painting CPCCPD3002A Apply paint by brush and roller CPCCPD3004A Apply paint by spray CPCCPD3006A Apply stains and clear timber finishes CPCCPD3009A Remove graffiti and apply protective coatings BCGPD3001B Prepare surfaces for painting BCGPD3002B Apply paint by brush and roller BCGPD3004B Apply paint by spray BCGPD3006B Apply stains and clear timber finishes BCGPD3009B Remove graffiti and apply protective coatings change to critical aspects of evidence from completing a minimum of 8 square metres to 6 square metres enhanced to improve sustainable work practices and resource use change to critical aspects of evidence from completing a minimum of 8 square metres to 6 square metres enhanced to improve sustainable work practices and resource use enhanced to improve sustainable work practices and resource use Changes between 2004 and 2009 Frameworks Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 9 of 16

10 Framework Stage 6 Support Materials CPCCSF2004A Place and fix reinforcement material CPCCSH2001A Prepare surfaces CPCCSH2002A Use aluminium sections for fabrication CPCCSH2003A Apply and install sealant and sealant devices CPCCSP2001A Handle solid plastering CPCCSP2002A Use solid plastering tools and CPCCSP2003A Prepare surfaces for plastering BCGSF2004B Place and fix reinforcement Changes between 2004 and 2009 Frameworks Now in 120-hour course. Remains in 240-hour, specialisation new unit Amalgamation of two units from the BCF00 Off-Site Training Package: BCF3014A Prepare aluminium for assembly BCF3015A Assemble aluminium framework BCF00 Off-Site Training Package BCF2018A Apply and install sealant devices BCGSP2001B Handle solid plastering BCGSP2002B Use solid plastering tools and BCGSP2003B Prepare surfaces for plastering For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Now in 120-hour course. Remains in 240-hour, specialisation Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 10 of 16

11 Framework Stage 6 Support Materials CPCCST2001A Prepare for stonemasonry construction process CPCCST2002A Identify and use stone products CPCCST2003A Finish stone CPCCWC2001A Complete penetrations and flashings CPCCWF2001A Handle wall and floor tiling BCF00 Off-Site Training Package BCF1000A Prepare for construction process (stonemasonry) BCF00 Off-Site Training Package BCF2000A Identify and use stone products BCF00 Off-Site Training Package BCF2003A Finish stone BCGWC2004B Complete penetrations and flashings BCGWF2001B Handle wall and floor tiling Changes between 2004 and 2009 Frameworks Now in 120-hour, 240-hour and specialisation study Remains in SBA CPCCWF2002A Use wall and floor tiling tools and BCGWF2002B Use wall and floor tiling tools and Now in 120-hour course. Remains in 240-hour, specialisation For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 11 of 16

12 Framework Stage 6 Support Materials CPCCWF3001A Prepare surfaces for tiling application CPCCWF3004A Repair wall and floor tiles CPCCWF3005A Carry out decorative tiling CPCCWF3006A Carry out mosaic tiling CPCCWP2001A Handle waterproofing CPCCWP2002A Use waterproofing tools and BCGWF3001B Prepare surfaces for tiling application BCGWF3004B Repair wall and floor tiles BCGWF3005B Carry out decorative tiling BCGWF3006B Carry out mosaic tiling BCGWP2001B Handle waterproofing BCGWP2002B Use waterproofing tools and Changes between 2004 and 2009 Frameworks Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA Now in 120-hour course. pool. Remains in specialisation study and SBA For HSC course purposes, may be used as an alternative to mandatory unit CPCCCM2005A Use construction tools and. The RTO must ensure the HSC Requirements and Advice for CPCCCM2005A are covered as outlined in the unit in Part B of the Syllabus. Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 12 of 16

13 Framework Stage 6 Support Materials (120, 240 & SS) (120, 240 & SS) (120, 240 & SS) (120, 240 & SS) (120, 240 & SS) CPCCWP2003A Prepare for construction waterproofing process CPCCWP2004A Prepare surfaces for waterproofing application BCCBS2001B Conduct tack coat spraying operations BCCBS2002B Hand spread asphalt BCCBS2003B Safely handle bituminous BCCCM2004B Drain and dewater site BCCCM2007B Spread and compact manually BCCCM2009B Work in confined spaces BCCCM2010B Install trench support BCCCM2013C Control traffic with a stopslow bat BCGWP2003B Prepare for construction process (waterproofing) BCGWP2004B Prepare surfaces for waterproofing application BCCBS2001B Conduct tack coat spraying operations BCCBS2002B Hand spread asphalt BCCBS2003B Safely handle bituminous BCCCM2004B Drain and dewater site BCCCM2007B Spread and compact manually BCCCM2009B Work in confined spaces BCCCM2010B Install trench support BCCCM2013C Control traffic with a stopslow bat Changes between 2004 and 2009 Frameworks no change same unit no change same unit no change same unit no change same unit Now in 120-hour course. Remains in 240-hour, specialisation no change same unit no change same unit May only be selected as an with written approval from school system authority or RTO. no change same unit May only be selected as an with written approval from school system authority or RTO. (BCGCM2003B Install trench support was in SBA courses in previous Framework.) no change same unit May only be selected as an with written approval from school system authority or RTO. Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 13 of 16

14 Framework Stage 6 Support Materials (120, 240 & SS) RIIG2004A Operate small plant and Changes between 2004 and 2009 Frameworks new unit Additional Specialisation Study units of competency CPCCBL3002A Carry out masonry veneer construction CPCCBL3008A Install aerated autoclaved concrete products CPCCCA3004A Construct wall frames CPCCCA3010A Install and replace windows and doors CPCCCA3013A Install lining, panelling and moulding BCGBL3002B Carry out masonry veneer construction BCGBL3008B Install aerated autoclaved concrete (AAC) products BCGCA3004B Construct wall frames BCGCA3010B Install and replace windows and doors BCGCA3013B Install lining, panelling and moulding fire control and separation references have been inserted to meet OHS regulator requirements fire control and separation references have been inserted to meet OHS regulator requirements Changes between 2004 and 2009 Frameworks No longer an in 240-hour course. Remains in specialisation study and SBA No longer an in 240-hour course. Remains in specialisation study and SBA Now in specialisation study course. Remains in SBA Remains in specialisation study and SBA Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 14 of 16

15 Framework Stage 6 Support Materials CPCCCA3016A Construct timber external stairs CPCCCA3017A Install exterior cladding CPCCCO3001A Place concrete CPCCCO3002A Finish concrete CPCCCO3003A Cure concrete CPCCCO3004A Carry out decorative finishes to concrete CPCCCO3005A Resurface concrete CPCCCO3013A Slump test concrete CPCCPB3014A Install batt insulation products CPCCPB3015A Install acoustic and thermal environmental protection systems BCGCA3016B Construct external stairs BCGCA3017B Install exterior cladding BCGCO3001B Place concrete BCGCO3002B Finish concrete BCGCO3003B Cure concrete BCGCO3004B Carry out decorative finishes to concrete BCGCO3005B Resurface concrete BCGCO3013B Slump test concrete BCGPB3014A Install batt insulation products BCGPB3015A Install acoustic and thermal environmental protection systems Changes between 2004 and 2009 Frameworks Remains in specialisation study and SBA Remains in specialisation study and SBA Remains in specialisation study and SBA Remains in specialisation study and SBA Remains in specialisation study and SBA Now in specialisation study course. Remains in SBA Remains in specialisation study and SBA Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 15 of 16

16 Framework Stage 6 Support Materials CPCCSF2003A Cut and bend using oxy-lpg BCGSF2003B Cut and bend using oxy-lpg Changes between 2004 and 2009 Frameworks No longer an in 240-hour course. Remains in specialisation study and SBA Note, not all units of competency from the school-based apprenticeship pathway have been included. Refer to Section 17 of Part A of the Syllabus. Comparison of the revised Syllabus and new Training Package to the old Syllabus and Training Package Page 16 of 16