Wire Rope Isolators. WR Series. Wire Rope Isolators. Overview. Wire Rope Isolators

Transcription

1 WR WR Series Overview U.S. Patents,9,8 Standard are comprised of stainless steel stranded cable threaded through aluminum alloy retaining bars that are mounted for effective shock and vibration isolation. With their corrosion resistant, all-metal construction, Enidine are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone and abrasives. Featuring a patented crimping pattern, versatile mounting options and a variety of sizes, these helical isolator products can help ensure that your systems can effectively meet performance requirements in Commercial, Industrial, and Defense industries, including MIL-STD-80, MIL-STD-, MIL-S-90D, MIL-E-00, STANAG-0, BV- and DEF-STND 0. For more information, please refer to our Wire Rope Isolator Sizing Information on pages -8 to assist you in selecting a model for your application. info@enidine.eu Tel.: Fax:

2 WR Series Overview WR Crimp Crimped Mount Bar Wire Rope Cable Crimp Models (WR WR8): Enidine s patented crimp design lowers cost by using fewer mount bars when compared to the clamp design, no assembly hardware, and reduced assembly time. Clamp Mount Screw Outer Mount Bar Wire Rope Cable Inner Mount Bar Clamp Models (WR WR0): Enidine s clamp bar models are constructed by clamping the wire rope between two fastened mount bars. info@enidine.eu Tel.: Fax:

3 WR WR Series Materials and Finishes: Overview Standard: Optional: Special: Wire Rope: 0/0 Stainless Steel Mount Bars: 0-T Aluminum, Chemical Conversion Coated per MIL-C-, Class A Hardware: Alloy Steel per ASTM F8, Zinc Plated (WR WR0 Series) Thread: Stainless Self Clinching Insert (WR WR8 Series), Threaded bar (WR WR0 Series) Wire Rope: Galvanized or Nylon Coated Stainless Mount Bars: 0-T Aluminum, Anodized per MIL-A-8, Type II, Class 0/0 Stainless Steel per ASTM A, Passivated Hardware: 0/0 Stainless Steel (when stainless steel bars are specified) (WR WR0) Threads: Stainless Steel Helical Inserts, Free Running or Self Locking (WR WR0) Threaded Aluminum (WR WR8) Consult Enidine Isolator Options: Mounting: Loops: Enidine offers a full range of mounting combinations of thru-hole, countersunk, and threaded bars. All configurations are available in either Imperial or Metric styles. Add an M after the mounting option for Metric. Some models have reduced mounting options available due to limited fastener installation space. Consult Enidine if a preferred mounting configuration is not listed. Enidine s wire rope isolators can be purchased with the full number of loops, or as few as -Loops. The number of loops is indicated in the isolator part number. Performance is provided for full loop isolators. Performance for reduced loop isolators can be obtained by a simple ratio. Bellmouth: Performance: Enidine s wire rope isolators are available with a bellmouth option. The bellmouth feature includes mount bars with radii manufactured into the wire rope hole edges. This option is recommended for high fatigue applications. Add an R to the end of the part number. Stiffness (Kv or Ks): Wire rope isolators exhibit non-linear stiffness behavior. Small deflections, usually associated with vibration isolation, will have a different spring rate than larger shock deflections. Enidine publishes typical vibration stiffness values (Kv), and average shock stiffness values (Ks) within the catalog. These values can be used with the provided equations listed on Page 8 to predict system performance. The stiffness values listed in the catalog are for full-loop versions. For reduced loop versions, ratio the stiffness by dividing the number of desired loops by the number of full loops. Isolator Axes: Wire rope isolators are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations. COMPRESSION º COMPRESSION/ROLL Damping: Typically -%, depending on size and input level. For specific damping considerations, please consult Enidine. Mounting Orientation: The diagrams below illustrate typical mounting orientations. FIXED SHEAR (for ) FIXED ROLL COMPRESSION º COMPRESSION/ROLL FIXED SHEAR FIXED ROLL Stabilizers: (for ) Stabilizers are used to control deflections of tall supported masses. Stabilizers are typically recommended when the height equals -times the width or depth dimension. In most applications, the quantity of stabilizers required are half as many as the base isolators, and selected one size softer than the base isolators. info@enidine.eu Tel.: Fax:

4 WR Series Application Worksheet WR APPLICATION WORKSHEET - INPUTS METRIC PART I: SYSTEM DATA:. Total Supported Load ( WT): WT = Kg x 9,8 = N. Number of Isolators (n): n = METRIC. Static Load per Isolator (W): W = WT n W = N* * Assumes a central CG. Load Axis: Compression Load Axis Shear or Roll º Compression/Roll PART II: VIBRATION SIZING:. Input Excitation Frequency ƒi = Hz ( = rpm ). System Response Natural Frequency for 80% isolation: ƒ n = ƒ i,0 = Hz. Maximum Isolator Vibration Stiffness: (K v ) K v = W (π ƒ n ) K v = N/m g = 9,8 m/s. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Isolator s vibration stiffness must be less than the calculated maximum K v g PART III: SHOCK SIZING:. Maximum Allowable Transmitted Acceleration: A T = G s. Shock Input Velocity: V = m/s Free Fall Impact: V = gh g = 9,8 m/s h = Drop Height (m) V D min = g(a ). Min. Isolator Response Deflection: T D min = m K s = W(V/D min ). Maximum Isolator Shock Stiffness: g K s = N/m. Select an isolator by comparing calculated values with technical data for the desired load axis provided in tables for each isolator. a.) Calculated W must be less than the isolator s max static load and b.) Calculated D min must be less than the isolator s max deflection Note: Metric deflections are calculated in meters (m) and technical data is in millimeters (mm). and c.) Isolator s shock stiffness must be less than calculated maximum K s V. Check actual deflection using K s from technical data D actual = to ensure that the isolator s max deflection is not exceeded. K s (Isolator)g W D actual = m. If isolator s max deflection is exceeded, select another isolator and repeat steps and. info@enidine.eu Tel.: Fax:

5 WR WR Series X.000 9, X.00 8,.0 X. 0,.9 X MOUNTING Mounting HOLES Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W "W" X.,9. ø,ø.88. H "H" (Ref) Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,0 B, D, E WR ,0 WR-00 ±, 0 0,0 A, B, C, D, E, S Ø, ± 0, M X 0, 90º WR ,0 (#8- UNC) (8º) WR ,0 WR ,0 Model Number Ordering Code WR D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ T ] - Tapped Maximum recommended torque for standard threaded insert is 0, Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 0 (Reduced Number of Loops Available) See Sizing Table U.S. Patent,9,8 * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing info@enidine.eu Tel.: Fax:

6 WR Series WR Static Load vs. Deflection Compression WR , WR , WR-00-0, 8,8 WR-00-0,8, WR ,8, WR ,8,9,9 º Compression/Roll WR-00-0, 0, WR-00-0,,0 WR ,8, WR ,9,0,0 WR ,9,, WR-800-0,0,,9 Shear/Roll N mm N/m kn/m WR , WR , 8,8 8,8 WR-00-0,,, WR ,8,9,9 WR ,8,, WR-800-0,9,, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

7 WR WR Series, 00,, X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, ø, H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,0 B, D, E WR ,0 WR ,0 ±, WR ,0 A, B, C, D, E, S Ø, ± 0, M X 0,8 90º WR-00 0,0 (#0- UNF) (8º) WR ,08 Model Number Ordering Code WR D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is 0,9 Nm Operating Temperature Range: -00ºC to 0ºC U.S. Patent,9,8 Number of Loops: Isolator Size: 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

8 WR Series WR Static Load vs. Deflection Compression WR , 0 WR , 0 WR-00-0, 9 WR-00-0,8 WR ,8 8,9 WR ,9,0 º Compression/Roll WR-00-0, 8 0 WR-00-0, 8 WR ,8 9, WR-00-0,9, WR-00-0,9, WR-800-0,0 9,, Shear/Roll WR , WR , 8 8 WR-00-0, WR ,8,0,0 WR-00-0,8,, WR ,9,, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

9 WR WR Series,0,, X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W,9 ø, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR , WR , B, D, E WR-00 0, WR-00 0, ±, WR , A, B, C, D, E, S Ø,9 ± 0, M X,0 90º WR , (/-0 UNC) (8º) WR-800 0, Model Number Ordering Code WR D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is, Nm Operating Temperature Range: -00ºC to 0ºC U.S. Patent,9,8 Number of Loops: Isolator Size: 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

10 WR Series WR Static Load vs. Deflection Compression WR , 9 WR , 8 WR-00-0, 9 WR-00-0,8 8 9 WR ,8 WR-00-0,8 WR-800-0,9 º Compression/Roll WR , 8 WR , 0 WR ,8 WR-00-0,9 0 WR ,9 9 WR ,0 WR ,0 Shear/Roll WR , WR , WR , WR ,8 WR ,8 9 9 WR-00-0,9 WR-800-0,9 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

11 WR WR Series,0,, X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W,9 ø,0 (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight. Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR , B, D, E WR-00 ±, 0, WR , WR-800 0, ±,0 WR-900 0,8 A, B, C, D, E, S Ø,9 ± 0, M X,0 90º (/-0 UNC) (8º) Model Number Ordering Code WR D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is, Nm Operating Temperature Range: -00ºC to 0ºC U.S. Patent,9,8 Number of Loops: Isolator Size: 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

12 WR Series WR Static Load vs. Deflection Compression WR-00-0, WR , 0 88 WR ,8 WR-800-0,9 8 WR-900-0,0 8 º Compression/Roll WR-00-0,8 0 WR ,8 9 WR ,9 8 WR-800-0, 8 8 WR-900-0, Shear/Roll WR , WR-00-0, WR ,8 WR-00-0,9 WR ,,9,9 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

13 WR WR Series X.000,0 X.00,.0 X.,.9 X MOUNTING Mounting HOLES Holes See Mounting Options X.9,9. Note: Dimensions are in mm Tolerances are ±.mm W "W" ø ø,8.88. H "H" (Ref) Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,9 WR ,0 D WR-00 0, B, D, E WR-00 8 ±, 0, WR-00 0, WR , A, B, C, D, E, S Ø,9 ± 0, M X,0 90º WR , (/-0 UNC) (8º) WR-80 0, WR-900 ±,0 88 0,8 WR ,9 Model Number Ordering Code WR D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is, Nm Operating Temperature Range: -00ºC to 0ºC U.S. Patent,9,8 Number of Loops: Isolator Size: 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

14 WR Series WR Static Load vs. Deflection Compression WR , 8 WR-00-0, WR , 89 WR , 0 WR ,8 WR ,8 9 WR-800-0,9 8 8 WR , 8 9 WR , 0 WR ,8 9 0 º Compression/Roll WR-00-0, 9 WR-00-0,8 8 WR ,8 9 9 WR ,9 WR-00-0,9 8 WR ,0 9 WR , 8 8 WR-80-0, WR-900-0, 0 WR , 8. Shear/Roll WR , WR-00-0, WR-00-0, WR-00-0,8 9 9 WR ,8 0 0 WR-00-0,8 0 0 WR ,9 8 WR ,0 9 WR ,,, 0 WR-90-0,9,, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

15 WR WR8 Series,,,9 X Mounting Holes See Mounting Options, Note: Dimensions are in mm Tolerances are ±.mm W ø, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,8 WR8-00 0, WR ±, 0, WR , A, B, C, D, E, S Ø,9 ± 0, M X,0 90º WR , (/-8 UNF) (8º) WR , WR8-80 ±,8 00 0, WR ,9 WR Model Number Ordering Code D T M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: Add M for Metric *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated For C sink and Threaded Options Thread Thread Thru D E S Thread C sink Thru Threaded Hole Options:*[ ] - Flush Self Clinching Threaded Insert [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking [ T ] - Tapped Mounting Options: See Chart Maximum recommended torque for standard threaded insert is, Nm Operating Temperature Range: -00ºC to 0ºC U.S. Patent,9,8 Number of Loops: Isolator Size: 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing info@enidine.eu Tel.: Fax:

16 WR8 Series WR Static Load vs. Deflection 8 Compression WR ,8 8 8 WR ,9 WR ,0 9 9 WR ,0 0 WR ,0 WR WR WR ,8 º Compression/Roll 8 WR ,9 89 WR ,0 8 WR , 09 0 WR , 8 0 WR , WR ,8 WR ,8 9 8 WR , Shear/Roll 8 WR ,8 0 0 WR ,9 WR ,0 9 9 WR ,0 WR ,0 WR , WR , 8 WR ,8 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

17 WR WR Series -Loop, 9, ±.08,,, 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, (Ref) ø9, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR-0 8 0,8 WR ,8 WR-0 0 0,90 WR-0 8 ±, 08 0,9 A, B, C, D, E, S Ø, + 0, M X,0 90º - 0,8 WR ,98 (/-8 UNF) (8º) WR-0 0,0 WR , WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar 0 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

18 WR Series -Loop WR Static Load vs. Deflection Compression WR ,0 WR-0-0 0, 0 WR , 80 8 WR-0-0, 8 WR-0-0 9,8 0 WR-0-0 9,0 WR , º Compression/Roll WR ,8 WR-0-0 8,8 WR-0-0,9 0 9 WR-0-0,0 0 0 WR-0-0 0, 9 WR-0-0 9,9 WR Shear/Roll WR , WR-0-0 9, 8 8 WR , 8 8 WR-0-0, 9 9 WR-0-0,8 WR , 0 0 WR-80-0, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

19 WR WR Series,9 ±0,8,,,, X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, (Ref) ø9, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR-00 8,0 WR-00 89, WR-00 0,0 WR-00 8 ±, 08, A, B, C, D, E, S Ø9,0 + 0, - 0,8 *M8 X, 90º WR ,0 WR-00 0, (/-8 UNF) (8º) WR ,0 * Tapped M8 x., Inserts M x.0 WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric All Mounting Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 0 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

20 WR Series WR Static Load vs. Deflection Compression WR ,0 9 WR-00-08, 0 WR , 0 WR , 0 9 WR ,8 8 9 WR-00-08,0 8 WR , º Compression/Roll WR ,8 0 WR , WR ,9 9 WR ,0 WR , WR ,9 0 WR Shear/Roll WR , 0 0 WR , WR-00-08, WR-00-08, WR ,8 0 0 WR , WR , Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

21 WR WR Series -Loop,,8 ±0,8,,, 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W 9, (Ref) ø, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR-0 9, WR-0 8 0, WR ,0 WR-0 9, A, B, C, D, E, S Ø9,0 +0. *M8 X, 90º ±, -0,8 WR-0 08,8 (/-8 UNF) (8º) WR-80,0 WR-8,8 WR-90 80, * Tapped M8 x., Inserts M x.0 WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 0 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 0 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

22 WR Series -Loop WR Static Load vs. Deflection 8 Compression WR-0-0,0 WR , 9 WR-0-0, 08 WR-0-0 8,8 WR ,9 0 WR , 9 WR-8-0 8,9 8 WR , º Compression/Roll 8 WR-0-0 9, 0 WR-0-0,8 98 WR-0-0,0 0 WR-0-0 8, 9 WR ,8 WR , 0 WR , WR-90-0,8 9 Shear/Roll WR ,0 WR-0-0 0, WR-0-0, 0 0 WR ,8 9 9 WR-0-0 0,9 0 0 WR-80-0, WR ,9 8 WR , 8 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

23 WR WR Series,9 ±0,8,,,, 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W 9, (Ref) ø, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR-00 9,8 WR ,9 WR ,00 WR-00 9, A, B, C, D, E, S Ø *M8 X, 90º ±, WR-00 08,0 (/-8 UNF) (8º) WR-800,0 WR-80,90 WR ,09 * Tapped M8 x., Inserts M x.0 WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 0 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

24 WR Series WR Static Load vs. Deflection 8 Compression WR ,0 9 WR , 08 WR , 8 WR ,8 9 WR ,9 0 WR , 9 WR ,9 0 8 WR , 8 9 º Compression/Roll 8 WR , 9 WR-00-08, WR ,0 9 8 WR , 9 98 WR ,8 9 8 WR , 9 WR ,9 8 WR ,8 8 Shear/Roll 8 WR ,0 9 9 WR , 0 0 WR-00-08, WR ,8 WR ,9 8 8 WR , 0 0 WR ,9 8 WR , 0 0 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

25 WR WR0 Series, ±0,8 9,,,, 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, (Ref) ø.,9 (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,00 C, D WR ,0 WR0-00 0,0 WR ±,0,0 A, B, C, D, E, S Ø,0 + 0, M0 X, 90º - 0,8 WR0-00 9,00 (/8- UNF) (8º) WR0-800, WR , WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 0 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing info@enidine.eu Tel.: Fax:

26 WR0 Series WR Static Load vs. Deflection Compression WR ,8 89 WR , 9 09 WR ,9 0 0 WR , 8 WR , WR , 9 WR , 9 º Compression/Roll WR , 9 9 WR , 0 WR , 0 WR , 8 WR ,8 0 WR , WR , 8 8 Shear/Roll WR , WR , WR , WR , WR ,0 WR ,9 WR , Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

27 WR WR8 Series 8, ±0,8,, 90, 8, 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W 0,0 (Ref) ø, (Ref) H Size Height Width Ref Thread C sink Mounting H W Unit Weight Thru Hole mm Metric in. mm in. mm Kg Options mm (in.) (Imperial) WR ,0 C, D WR8-00 9, WR ,90 A, B, C, D, E, S Ø, + 0, M X, 90º ±, - 0,8 WR ,0 (/- UNC) (8º) WR8-900,0 WR8-90 8,90 WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar 00 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

28 WR8 Series WR Static Load vs. Deflection Compression k WR ,8 0,8 00 WR ,, 8 WR ,,9 0 9 WR , 0,9 800 WR ,, 8 80 WR ,, º Compression/Roll 0 k 0 WR ,, 8 0 WR , 9, WR ,0 0, 8 WR ,,8 8 WR ,,8 89 WR ,, Shear/Roll k WR ,, WR ,, WR ,89, 9 9 WR , 08,0 WR ,, WR ,, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

29 WR WR Series 0, ±0,8,8 08,0 9,9 0,8 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, (Ref) ø8, (Ref) H Height Width Ref Thread C sink Size Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,9 WR-00 ±,,0 A, B, C, D, E, S Ø , M8 X, 90º - 0,8 WR-00 0,0 (/-0 UNC) (8º) WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 00 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

30 WR Series WR Static Load vs. Deflection Compression k WR-00-08,8, 0 0 WR-00-08,0 0,9 8 WR-00-08, 9, º Compression/Roll k WR-00-08,9 9, 8 WR ,88, WR-00-08,9 8,9 99 Shear/Roll k WR-00-08,, WR-00-08,0 08,0 WR-00-08,, Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax:

31 WR WR0 Series 0, ±0,8,8 08,0 9,9 0,8 8X Mounting Holes See Mounting Options Note: Dimensions are in mm Tolerances are ±.mm W, (Ref) ø,8 (Ref) H Height Width Ref Thread C sink Size Mounting H W Unit Weight Thru Hole mm Metric mm mm Kg Options mm (in.) (Imperial) WR ,0 ±, WR0-00 8, A, B, C, D, E, S Ø9.8 +0, -0,8 M8 X, 90º (/-0 UNC) (8º) WR Model Number Ordering Code D H M P N R Feature Options: *[ ] - None [ R ] - Bellmouth Mount Bars Wire Rope Options: *[ ] - 0/0 Stainless Steel (or Equiv.) [ G ] - Galvanized Steel [ N ] - Nylon Coated Stainless Steel Mounting Options Thru C sink Thru A B C C Sink C sink Thread Mount Bar Options: *[ ] - 0-T AL ALY (or Equiv.) Chem Conv. Coated [ Y ] - 0-T AL ALY (or Equiv.) Anodized [ P ] - 0/0 Stainless Steel (or Equiv.) Passivated Thread Thread Thru D E S Thread C sink Thru Add M for Metric For C sink and Threaded Options Threaded Hole Options:*[ ] - Tapped [ H ] - Helical Insert, Free Running [ L ] - Helical Insert, Self Locking Maximum recommended torque for threaded bar is 00 Nm Operating Temperature Range: -00ºC to 0ºC Mounting Options: Number of Loops: Isolator Size: See Chart 08 (Reduced Number of Loops Available) See Sizing Table * Standard features. Any non-standard items may require longer lead times. Call for quotation. Nylon coated wire rope models have different stiffness values compared to the standard models. Please contact Enidine for proper sizing. info@enidine.eu Tel.: Fax:

32 WR0 Series Static Load vs. Deflection Compression k WR ,, 8 8 WR , 9, 8 WR º Compression/Roll k WR ,0 9, 98 WR ,, 8 Shear/Roll k WR ,, WR , 0, 8 8 Note: Performance provided for full loop models with standard (0/0) stainless steel cable. Consult ENIDINE for other options. Do not extrapolate curves. info@enidine.eu Tel.: Fax: