ALBRIGHT SAW CO., INC.
|
|
- Wilfrid Chambers
- 7 years ago
- Views:
Transcription
1 54660 PRETTY RUN ROAD SOUTH BLOOMINGVILLE, OH TELEPHONE: FAX: WEBSITE: Sawmill Equipment, Service & Supplies Serving the Sawmill Industry Since 1979
2 To All Sawmill Operators: Since 1979, Albright Saw Co., Inc. has been in the business of providing quality sawmill equipment, supplies and service to Ohio, West Virginia, Kentucky and surrounding areas. Now we would like to introduce ourselves to more of our neighbors. We offer a complete line of supplies and equipment for your sawmill operation and we would appreciate the opportunity to serve you. We sell new Frick equipment and parts and also handle used equipment. Please don t hesitate to contact us for any further information needed. We should have what you need in stock, and we ship the same day on all orders placed before noon. We accept MasterCard, Visa & American Express or can ship UPS/COD. We look forward to being of service to you. Sincerely, Jerry L. Albright President
3 SAWMILL SUPPLIES Albright Saw Co., Inc. carries a complete selection of quality sawmill supplies, including: *Lumber Grading Supplies *Steel Strapping Supplies Lumber Crayons Banding 3/8 1-1/4 Crayon Holders Seals 3/8 1-1/4 Tally Books Tools Tally Sheets Tensioners Tally Pencils Sealers Lumber Sticks Banding Carts *Logging Supplies Husqvarna Chainsaws Chainsaw Chains Chainsaw Bars Bar Oil Mixing Oil Swedge & Choker Cables *Saw Bits Regular Standall Standall Chrome Carbide *Saw Shanks & Wrenches *Saw Sharpeners & Supplies *Chipper parts Albright Saw Grinder (electric) Knife Holders 48 & 58 Atlas Hand Filer Knife Clamps 48 & 58 Grinding Wheels for Sharpeners Chipper Knives for 48 & 58 Western Wheels Anvils for 48 & 58 Jockey Wheels Carbide & Regular Diamond Wheels Anvil Clamps for 48 & 58 #18 File Sets Wear Plates Carbide & Regular *Bandsaw Blades Counter Knives for 48 & 58 Wide & Narrow Carbide & Regular *Mill Services *Circle Saws Saw Hammering Inserted Tooth Backs Welded & Straightened Carbide Tipped On-site Mandrel Refacing Carbide Saw Sharpening & Retipping
4 FRICK SAWMILL EQUIPMENT ` Carriages 00, 0C, 01C, #1C, TD-0C, TD-01C, TD-36, TD-40 Ways & Track Husk Assemblies Mandrels, Bearings, Belts & Pulleys Saw Guides Manual or Remote Setworks Model B Handset Computer Setworks Hydraulic or Electric Feed Assemblies Hydraulic, Electric or Belt Dogs Manual, Air or Hydraulic Tapers Manual or Air Receders Manual or Air Power Edgers 27, 32, 3-27, 4-32, 6-41, 6-48, 8-48, 8-60 Log Turners - Hydraulic #120 or #160 Live Rolls Dead Rolls Green Chains Live Decks Compete Line of Parts for Above Equipment
5 PRICE SHEET SIMONDS BRAND Inserted Tooth Saws Diameter Inches Rim Patterns B, F, Gauge #2-1/2, #3 12 & 14 9 $ $ $ $ $ $ $1, $1, $1, $ $2, $2, $ & 60 7 $3, P.O.A. For carbide teeth add $3.50 per tooth SIMONDS BRAND SHANKS FOR INSERTED TOOTH SAWS Type Style List Price Our Price Each Qty 50+ Regular B, F, 2-1/2 & 3 $8.37 $7.50 $7.00 Super B, F, 2-1/2 & 3 $8.37 $7.50 $7.00 *Prices Subject to Change
6 SIMONDS BRAND BITS FOR INSERTED TOOTH SAWS All Tooth Styles All Bits Packaged 100 Bits per Box Item # Style Gauge Kerf Type Edge List Price Our Price 1-2 Bx 3+ Bx BF 8/9 9/32 REG BT $1.32 $1.29 $ BF 8/9 9/32 REG SC $1.63 $1.56 $ BF 8/9 9/32 LONG BT $1.32 $1.26 $ BF 8/9 9/32 LONG SC $1.63 $1.56 $ BF 8/9 9/32 STANDALL BT $1.48 $1.44 $ BF 8/9 9/32 STANDALL SC $1.78 $1.74 $ BF 8/9 9/32 DOMINATOR $3.89 $3.70 $ BF8/9 5/16 LONG BT $1.45 $1.40 $ BF 8/9 5/16 LONG SC $1.76 $1.72 $ BF8/9 5/16 STANDALL BT $1.58 $1.52 $ BF 8/9 5/16 DOMINATOR $4.17 $3.97 $ BF 7 5/16 STANDALL BT $1.58 $1.54 $ BF 7 5/16 STANDALL SC $1.89 $1.84 $ BF 7 5/16 DOMINATOR $4.17 $3.97 $ BF 7 5/16 EDGER BT $1.45 $1.40 $ /2 8/9 9/32 STANDALL BT $1.48 $1.38 $ /2 8/9 17/64 STANDALL BT $1.48 $1.38 $ /9 17/64 REG BT $1.32 $1.26 $ /9 17/64 STANDALL BT $1.58 $1.52 $ /9 9/32 LONG BT $1.32 $1.26 $ /9 9/32 REG BT $1.32 $1.26 $ /9 9/32 STANDALL BT $1.58 $1.52 $1.46 *Prices Subject to Change
7 PRICE SHEET MISCELLANEOUS SUPPLIES Saw Wrenches BDF, 2-1/2 or 3-Style $ Wrench Pins BDF, 2-1/2 or 3-Style $ 4.00 Saw Swage #1 Upset Swage $ Files 8 Mill Bastard $ Mill Bastard $ 4.85 Grinders Albright Saw Grinder (electric) $ Atlas or Andrus Hand Filer $ Grinding Wheels Diamond Wheel 4 (for ASC Grinder) $ Diamond Wheel 4 (for Jockey) $ Jockey Wheel (Gray) $ Western Wheel (Pink) $ #18 File Set (For Andrus or Atlas) $ Doyle Folding Log Rule $ Lumber Crayons (Box 12) (Specify Color) $ Lumber Sticks 200N & 300N $ N $ NS $ NL $ Chipper Knives Ea /4 x 4 x 3/8 $46.00 $44.00 $ /8 x 4 x 3/8 $58.50 $56.50 $53.50 Counter Knives 14-3/4 x 2-3/16 x 3/8 Carbide $ /8 x 2-3/16 x 3/8 Carbide $ Banding # Roll #Skid #2+Skid ½, 5/8 & 3/4x023 $.95 $.92 $.89 3/8 & 1/2x015 $.99 $.96 $ /4 x 031 $.91 $.88 $.85 Banding Seals 3/8 & ½ (Box 2000) $ /8 & ¾ (Box 2000) $ /4 HP (Box 1000) $ Sealers ½, 5/8 & ¾ $ Tensioners T-34-F $ *Prices Subject to Change
8 54660 PRETTY RUN ROAD SOUTH BLOOMINGVILLE, OH ALBRIGHT SAW CO., INC.
Practical Alignment Tools and Techniques
Practical Alignment Tools and Techniques Bruce Lehmann Sr. Engineer, Thin Kerf Technologies Inc Accurate sawing requires attention to proper alignment and maintenance. Alignment is critical to modem sawmills
More informationSaw Tooth Design and Tipping Materials
Saw Tooth Design and Tipping Materials Bruce Lehmann, P.Eng, Ph.D. Sr. Engineer, Thin Kerf Technologies Inc. British Columbia, Canada Introduction The purposes of a saw tooth are to: 1. Remove a chip from
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationPanel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
More informationBandsaw Performance Monitoring
Bandsaw Performance Monitoring Bruce F. Lehmann, P.Eng., Ph.D. Senior Engineer Thin Kerf Technologies Inc. Surrey, B.C., Canada Introduction Saw deviation sensing equipment is no longer an exotic or unusual
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationCHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationMODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER
MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,
More informationDR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
More informationSTIH) STIHL NG 7. Gebrauchsanleitung. Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding
STIH) STIHL Gebrauchsanleitung Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding Contents English Guide to Using this Manual BA_SE_098_002_0_02.fm
More informationShopping Cart Chair. Estimated Cost: Less then $25 if you find a free cart. Shopping Cart Chair page 1. FOR MORE PROJECTS, VISIT: makezine.
Shopping for an easy chair? Consider transforming a damaged or abandoned shopping cart. Upcycling an old, discarded shopping cart into a sleek and stylish chair is a fun, inexpensive weekend project and
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationHow to Build Your Own CornHole Game
How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationProgressive Price Catalog. Pro-Flex 120B Rotary Contour Finishing Mower
Progressive Price Catalog Pro-Flex 120B Rotary Contour Finishing Mower Part No. Description List Price US $ 601205B Pro-Flex 120B Rotary Contour Finishing Mower $21,450.00 Primary Use: Golf Courses. Suited
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More informationKNIFE GRINDER MATERIALS LIST & CONSTRUCTION TIPS by Michael Clerc mike.clerc@cox.net
KNIFE GRINDER MATERIALS LIST & CONSTRUCTION TIPS by Michael Clerc mike.clerc@cox.net Materials List Minimum tools required: Drill press & Drill bits ("#7", "F", 5 / 16 ", ¼", 17/64", ½", "O", 1") Tap Handle
More information* 20 8 RN. 74 Guide Bars HERE S HOW THE OREGON SAW BAR. 12" 14" 18" 20" 36" (Etc.) 0=.050" 8=.058" 3=.063" 4=.043"
74 Guide Bars HERE S HOW THE OREGON SAW BAR * 20 8 RN Length in Inches 12" 14" 18" 20" 36" (Etc.) Gauge 0=.050" 8=.058" 3=.063" 4=.043" GUARD MATE HOLES These holes are built into the noses of certain
More informationMaintenance kits. for hydraulic attachments Edition 2008 / 2009
Maintenance kits for hydraulic attachments Edition 2008 / 2009 Content Power Demolition Tools Lower breaker part kit 5 5 6 6 Expansion bolt kit 7 Tensioning bolt kit 7 DustProtector kit 8 Set of plastic
More informationHive Top Ventilation Shims
Hive Top Ventilation Shims When preparing your bee hives for the winter, it is very important to provide for ventilation at the top of the hive. Through out the winter, the bees are expelling a lot of
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More information15 WOOD BAND SAW CT015N
15 WOOD BAND SAW CT015N 1 3-speed 15 Wood Band Saw - Model CT015N General Safety Instructions Page 3 Specific Safety Instructions Page 4 Features Page 5 Features Illustration Page 6 Unpacking Page 7 Tools
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationRaised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
More informationCustomer service. Spare parts and services for NETZSCH customers. Pumps & Systems
Customer service Spare parts and services for NETZSCH customers Pumps & Systems Your Partner NETZSCH Pumps & Systems With their NEMO progressing cavity pumps, TORNADO rotary lobe pumps, macerators, dosing
More informationSERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationThe tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationTroop 8 Totin Chip Outline
Troop 8 Totin Chip Outline Troop 8 Lesson Plan 2 (1) Introduction (Discuss with Scout): The Totin Chit card is granted by Troop 8 to Scouts who have demonstrated the proper procedures for handling a knife,
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationEngine, disassembling and assembling
13-1 Engine, disassembling and assembling Note: Replace the oil cooler and thoroughly clean the oil passages if you find metal shavings or larger quantities of small metal particles in the engine oil,
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationMBSAW. Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions
06/2011 MBSAW Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationMechanical Reasoning Review
Mechanical Reasoning Review Work can be made easier or faster through practical applications of simple and/or compound machines. This is called mechanical advantage - in other words, using the principal
More informationAUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District
AUTOMOBILE MECHANIC STUDENT INTERNSHIP SKILLS LIST Provo School District Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles: Examines vehicle and discusses with customer or
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationOperating instructions for Electrode sharpening machine WIG 4
Operating instructions for Electrode sharpening machine WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH D-75203 Königsbach-Stein Remchinger Str. 4 Germany Tel.: +49 7232
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationON HARDTAIL KITS FOR ALL #103-0008 & #103-0009 (200 1982-2003 HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS CHOPPERS PART #103-0008 (stock tire width) & #103-0009 (200 series tire width) WELD ON HARDTAIL KITS FOR ALL 1982-2003 HARLEY DAVIDSON SPORTSTER MODELS If downloading
More informationWork Smart - Not Hard with a Blue Giant Lift Table
Lift Tables Hydraulic Lift Tables Eliminate the need to bend, twist and pick up heavy loads manually. Let BLUE GIANT Lift Tables increase productivity and decrease costly injuries caused by overexertion
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationOPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4
OPERATING INSTRUCTIONS FOR ELECTRODE SHARPENING MACHINE WIG 4 Original Please keep for further use! Kaindl-Schleiftechnik REILING GmbH, D-75203 Königsbach-Stein, Remchinger Str. 4 Germany Tel.: +49 7232/4001-0,
More informationDO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
More informationdrawworks WWL started manufacturing drawworks over 40 years ago under the BDW brand. draw on our experience BDW Model 2000-MX or MXE
Our experience benefits our customers WWL started manufacturing drawworks over 40 years ago under the BDW brand. Within the Oil & Gas drilling industry, the BDW brand is known as the Cadillac of drawworks.
More informationHEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
More informationbi B ItE The Wood-Mizer LT-15 Since Independent Sawmill & SAWMILL REVIEW Personal Experience A SMALL DOG
SAWMILL REVIEW Personal Experience BY JIM PHILP A SMALL DOG bi B ItE There is more to choosing a WITH A! sawmill than a mere listing of strengths and weaknesses. You need to consider the mill s capabilities,
More informationUSED BUT NOT SHOWN: ITEMS 11-24.
FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3
More informationMeet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
More informationVolkswagen To. Engine Crankshaft, Pistons. www.baumtools.com sales@baumtools.com. 800-848-6657 Toll Free 941-927-1414 Intl' 941-927-1612 Fax
- FLYWHEEL LOCK Locks flywheel in place during removal and installation. Audi - 4, AAN VW - Fox, Dasher, Quantum - CLUTCH PILOT BEARING PULLER Replaced by W88. Audi - 4, 5 984< VW - Vanagon -5 MOUNTING
More informationDrill String Design. The following topics will be discussed
Drill String Design The following topics will be discussed Kelly Drill pipe Drill collars Accessories; heavy wall drill pipe, jars, stabilizers, reamers, shock sub and bit sub Drill bits 1 Kelly Used to
More informationSpecification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
More informationTECHNICAL MANUAL FOR THE STAND ALONE BELT DRIVE ENCODER SYSTEM
INTERNATIONAL LIFT EQUIPMENT LTD London Office Leicester Office Units 1&2 Wanlip Road Highams Park Ind Estate Syston Larkshall Road Leicester London Leicestershire E4 9JD LE7 1PD Telephone 0208 5279669
More informationTOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
More informationInstallation Instructions GOOSENECK MOUNTING KIT Chevrolet/GMC 1500/2500/3500 All except 4-door Crew-Cab
GOOSENECK MOUNTING KIT Equipment Required: Fastener Kit: F Wrenches: 3/4, 7/8, 15/16 Drill Bits: 1/4 Other Tools: Drill WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
More informationM2 Antenna Systems, Inc. Model No: KT34M2
M2 Antenna Systems, Inc. Model No: KT34M2 10m f, MHz G, dbi F/B, db 28.0 7.3 18 28.2 7.3 23 28.4 7.4 25 28.6 7.5 24 29.2 7.6 20 15m f, MHz G, dbi F/B, db 21.0 6.9 19 21.1 6.9 22 21.2 7.0 24 21.3 7.0 24
More information2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
More informationThis little motorcycle has been designed
MITE CYCLE You'll need only an "A" ration to run this midget motorcycle. by R. G. Fisher The Mite Cycle, with its builder, is shown above. A small one-cylinder engine provides the motive power. This little
More informationIT S EASY JUST CALL TOLL FREE AT
PRICELIST 2015 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don t Wait Any Longer to Turn Your Trees into Money. IT S EASY JUST CALL TOLL FREE AT 1-800-567-0404 NorwoodSawmills.com Customize
More informationThe Hive Bodies. In the Beekeeper s Work Shop. Building a Bee Hive: The Hive Bodies. by Stephen E. Tilmann
The Hive Bodies In the Beekeeper s Work Shop The hive body is the heart of a managed bee hive colony (Figure 1). It is where the queen lays her eggs, the house bees raise the brood and the workers store
More informationPepper Mill Instructions by Fred Kachelhofer
by Fred Kachelhofer I have seen Nick Cook turn a pepper mill twice and read his article posted at http://www.nickcookwoodturner.com/articles.htm (follow link and then click on Pepper Mill ). I have had
More informationPulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE
Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More informationPRODUCT MANUAL - M090
PRODUCT MANUAL - M090 MODEL 203/266 ELECTRIC CAN OPENER 1 SAFETY CAUTION: SEVERED CAN LIDS HAVE CUTTING EDGES. USE OF A PROTECTIVE GLOVE OR TONGS IS ADVISED WHEN HANDLING LIDS. WARNING To avoid risk of
More informationInstallation Guide. Bath and Wall Surrounds SERIES 7104 1021861-2-B
Installation Guide and Wall Surrounds SERIES 7104 1021861-2-B Thank You For Choosing Sterling We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before you
More informationHow To Make A Spiral Fluted And Wire Wrapped Dagger Handle
Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS Part 1 Making A Spiral Fluted and Wire Wrapped Dagger Handle By: Steve Culver, MS After the rough handle material is drilled through
More informationFACTORY INSTALLED OPTIONS:
Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,
More informationPRODUCT HIRE LIST PRODUCT HIRE LIST HIRE - SALES - REPAIR - TESTING LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS
PRODUCT HIRE LIST PRODUCT HIRE LIST 2014 PRICES ON REQUEST All products also available for purchase LIFTING EQUIPMENT & ENGINEERING SUPPLIES SPECIALISTS HIRE - SALES - REPAIR - TESTING INTRODUCTION THE
More informationResharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
More informationPropeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
More informationFACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
More informationBuilding a Small Horizontal Steam Engine
T Building a Small Horizontal Steam Engine HE small engine described in this article was built by the writer in his spare time about an hour a day for four months and drives the machinery in a small shop.
More informationSHELVES. www.tedswoodworking.com
SHELVES It's rare that bookshelves look as interesting as the objects you display on them. After all, how much can you decorate the edges of your shelves and sides? This unit is unusual because the shelves
More informationUltra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationTeam Skills Challenge Event # 1 Plant Layout Score Sheet
Team Skills Challenge Event # 1 Plant Layout Score Sheet State Name: Team Members: 1. 2. 3. 4. Placement of Plant Material 25 Deduct 5 points/plant not placed within 6 inches +/- of correct placement to
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationModel RC Armature-Slot- Insulation Folder
Model RC Armature-Slot- Insulation Folder 21 Model RC will handle insulation material up to 8 wide between its guides. Creasing rollers are adjustable sideways to make troughs up to 6 wide. A fixed ruler-guide
More informationThe world leader in conveyor pulleys
The world leader in conveyor pulleys You ask. We Deliver. Chantland pulleys and rollers come in virtually any diameter, wall thickness, length, shaft size or end type. They re built from stainless steel,
More informationCSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas
CSP #34-013 - Welding Equipment, Supplies, Consumables & Bottled Gas Janet Bradley, Buyer Commodity #225 Bid Reference: 34-013 Expires July 2017 Prices firm thru July 2015, automatically renewing unless
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More informationLOGOSOL LAKS Traditional Sawing Using New Technology
LOGOSOL LAKS Traditional Sawing Using New Technology Logosol-Laks Frame Saw 4 Maximum yield of timber every time due to high dimensional accuracy and minimal material loss in the kerf. 4 Easy to handle.
More informationECONOMICS OF PACKAGED LUMBER
ECONOMICS OF PACKAGED LUMBER John R. Host Associate Market Analyst U. S. Forest Service Intermountain Forest and Range Experiment Station Missoula, Montana As kiln operatores, you are primarily concerned
More informationPower Window/Power Lock Installation. To begin with you will need all the parts listed below:
Power Window/Power Lock Installation To begin with you will need all the parts listed below: From Donor Fiero: Fiero power window regulators Power window motors (Generic GM type part) -motors are riveted
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationMercedes 722.3 722.4
96 Mercedes 7. 7. 5 6 7 8 - Clutch K - Brake Band B - Disc Brake B - Wide Planet Pinion 5 - One-Way Clutch F 6 - Clutch K 7 - Brake Band B 8 - Narrow Planet Pinion Int. Band Fwd. Band Rev. Clutch Direct
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationModular and Flexible. We want to make it easier for you! Innovative Riveting System. with blind rivet adapter BR 20. with blind rivet adapter BR 50
Modular and Flexible Innovative Riveting System 800 bar with blind rivet adapter BR 20 We want to make it easier for you! with blind rivet adapter BR 50 Engineered and Designed by with blind rivet nut
More information