TML PUNCHING DRILLING CUTTING DEBURRING LIFTING
|
|
- Branden Powers
- 7 years ago
- Views:
Transcription
1 PUNCHING DRILLING CUTTING DEBURRING PUNCHING DRILLING CUTTING DEBURRING LIFTING TML
2 Metal Core Drilling RB 35 X RB 35 SP RB 50 SP Ø 7/16" - 1-1/2"; mm Cutting Depth: up to 2"; 50 mm Twist Drill: Ø 3/64" - 1/2"; 1-13 mm Countersinking: Ø 7/16" 1-9/16"; mm 1100 W Single-Speed Gearbox: 450 rpm Arbor: 3/4"; 19 mm Weldon Shank Coolant Supply: integrated, automatic Stroke: 4-3/4"; 120 mm 110 V, 60 Hz Tool Force / magnetic holding force: 472 lbs/2,023 lbs on 3/8" plate Magnet Foot: 2-3/4" x 6"; 70 x 185 mm 25 lbs; 10.6 kg V UL Cutting depth: Twist Drill: Countersinking: Ø 1/2" - 1-1/2"; mm up to 2"; 50 mm Ø 1/32" - 1/2"; 1-13 mm Ø 7/16" - 1-5/8"; mm W Single-Speed Gearbox: 450 rpm Arbor: 3/4"; 19 mm Weldon Shank Coolant Supply: integrated, automatic Motor: height adjustable 110 V 50/60 Hz Tool Force / magnetic holding force: 606 lbs on 3/8" standard steel 517 lbs on 1/4" standard steel Magnet foot: 2-13/16" x 7-1/2"; 72 x 190 mm Stroke: 4-1/8"; 105 mm 22 lbs; 9.9 kg WD.110.UL HSS Cutter Sets Cutting depth: Twist Drill: Countersinking: Ø 1/2" - 2"; mm up to 2"; 50 mm Ø 1/32" - 3/4"; 1-20 mm Ø 7/16" - 1-5/8"; mm W 2-Speed Gearbox: 250 / 450 rpm Tool holder: MT2 Motor: height adjustable 110 V 50/60 Hz Tool Force / magnetic holding force: 517 lbs on 3/8" standard steel 449 lbs on 1/4" standard steel Magnet foot: 2-13/16" x 7-1/2"; 72 x 190 mm Stroke: 3-1/8"; 100 mm 24 lbs; 11.5 kg UL Magnetic Pick Up Sticks HSS Basic 6pc. Silver Cutter Kit 1" 6 pc. Cutter Set: Includes 1 ea. of Ø 9/16", 5/8", 11/16", 13/16", 15/16", 1 1/16" Ø mm in solid plastic case Includes 1 ejector pin Cutting Depth: Countersinking: 1-speed gearbox: Tool Holder: Cooling: Magnet Foot: Magnet adhesion: Height: Power cord: Ø 7/16" - 1-1/4"; mm 1"; 25.0 mm Ø 3/8" - 1-1/4"; mm 900 W 450 rpm 3/4"; 19 mm Weldon shank internal, automatically through the spindle 110 Volt or 230 Volt 3-3/4" x 7-7/8"; 95 x 200 mm (rigid) 3600 lbs; N 9"/7"; 227/185 mm 3.0 m 27.5 lbs 12.5 kg HSS Basic 6pc. Silver Cutter Kit 2" pc. Cutter Set: Includes 1 ea. of Ø 9/16", 5/8", 11/16", 13/16", 15/16", 1 1/16" Ø mm in solid plastic case Includes 1 ejector pin Magnetic Pick Up Stick, Length 15-6/8" 400 mm This item contains a moveable magnet in a stainless steel shaft. Push the shaft in to pick up material. Pull the shaft out to release the material
3 Drilling and Lifting HSS-Co Annular Cutters Tungsten Carbide Cutters TCT Hole Saws HSS ALFRA USA Black Line cutters Available in over 100 stock sizes from 7/16" x 1" DOC to 2-3/8 x 2" DOC. TCT Annular Cutters in over 70 sizes from ½" to 2" diameters HSS ALFRA USA Silver Line cutters Available in over 80 sizes from 7/16" x 1" to 2-3/8" x 2" DOC. TCT Strong Construction cutter in over 90 sizes for large diameter (2" x 2" to 4" x 4") hole making TCT Hole Saws ALFRA manufactures the largest range of TCT Hole Saws in four types with over 450 sizes available in metric and fractional. Excellent for drilling all steels, especially stainless steels Key Facts TML 250: Up to 250 kg holding force at 10 mm material thickness and 90 kg holding force already at 3 mm material thickness (The stated performance adds a safety-factor of 3 for the lifting operation. This means, that the tear-off force needs to be three times the maximal holding force.) Outstanding performance on thin walled materials (already applicable at 1 mm) Weight reduction of 70% at same holding force Effortless and ergonomical one-lever magnet activation Revolutionary magnetic technology allows for a much wider range of lifting solutions 360 rotating lifting hook TiN-coated, hardened steel magnetic adhesive surface Technical Data TML 250: 3,5 kg Up to 750 kg max. holding force Max load: up to 250 kg (1:3 Safe working load) Length: 240 mm (closed lever), Width: 91 mm, Height: 191 mm (open lever) Magnetic contact surface: Length: 135 mm, Width: 65 mm Key Facts TML 500: 300 kg holding force already at 5 mm material thickness and 490 kg holding force at 10 mm material thickness and (The stated performance adds a safety-factor of 3 for the lifting operation. This means, that the tear-off force needs to be three times the maximal holding force.) Outstanding performance on thin walled materials (already applicable at 1 mm) Weight reduction of 70% at same holding force (than competitive magnets) Effortless and ergonomical one-lever magnet activation Revolutionary magnetic technology allows for a much wider range of lifting solutions 360 rotating lifting hook TiN-coated, hardened steel magnetic adhesive surface Technical Data TML 500: 7,3 kg Up to kg max. holding force Max load: up to 500 kg (1:3 Safe working load) Length: 295 mm (closed lever), Width: 118 mm, Height: 216 mm (open lever) Magnetic contact surface: Length: 185 mm, Width: 88 mm TMC Magnet Base: TML 100 Lifting Magnet TMH 50 - Hand Lifting Magnet Key Facts TMC 300 as Magnet Base: Up to 300 kg holding force, even on a steel plate of only 6 mm thickness Ergonomic and easy one-hand actuation M5 and M6 tapped holes on the top as well as on the sides enable an easy attachment Technical data TMC 300: Only 1 kg Tear-off force: 300 kg (at a 6 mm thick steel sheet S 235) Length: 82.5 mm, Width: 80 mm, Height: 32.5 mm Key facts TMH 50 Hand Lifting Magnet: Max. lifting capacity: 50 kg (even from 3 mm sheet metal S235) Protects hands and fingers from hot and sharp steel Technical data TMH 50 Hand Lifting Magnet: 1.6 kg Max. lifting capacity at vertical lifting: 50 kg Length: 126 mm, Width: 80 mm, Height: 100 mm; with handle: Length: 190 mm, Width: 124 mm H TMA 300 Variable Welding Angle Key facts TML 100 Lifting Magnet: Max. lifting capacity of 50 kg at 3 mm material thickness and 100 kg lifting capacity from 6 mm (at safety factor 1:3) Outstanding performance on thin walled materials 360 rotating and swiveling hook (also at maximum load) Technical data TML 100 Lifting Magnet: 1.7 kg; Tear-off force: 300 kg (from 6 mm sheet metal S235) Length: 82.5 mm, Width: 80 mm, Height: 85 mm L Key facts TMA 300 Hand Lifting Magnet: Stepless adjustable angle side plates from 0 to 90 to hold/weld worksheets Invaluable for anyone, who has to weld together heavy worksheets in different angles Light-weighted, easy and trouble-free handling Technical data TMA 300 Hand Lifting Magnet: 2.7 kg Tear-off force: 300 kg (at 6 mm steel sheets S235) Length: 162 mm, Width: 124 mm, Height: 223 mm A
4 Cutting and Punching VS Step drills AKKU Battery Packed Hydraulic Punch Gun Standard, Tristar, Tristar Plus S punch and dies AKKU battery packed hydraulic punch combo kit (includes kit w/ carry case, accessories, 2 battery packs and 6 sets of ALFRA TRISTAR punch and dies sizes 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2") v VS1 Multi Step Drill 1/8-1/2" TiN-Coated VS2 Multi Step Drill 1/2-1" TiN-Coated VS3 Multi Step Drill 1/4-3/4" TiN-Coated VS4 Multi Step Drill 3/16-1/2" TiN-Coated VS7 Multi Step Drill 7/8" TiN-Coated VS8 Multi Step Drill 3/16-7/8" TiN-Coated VS11 Multi Step Drill 7/8-1-1/8" TiN-Coated VS12 Multi Step Drill 7/8-1-3/8" TiN-Coated AKKU battery packed hydraulic Scope of supply: ALFRA battery packed compact hydraulic punch carry case, accessories, 2 battery packs v Call your local distributor to receive competitive pricing. ALFRA Busbar Bending and Punching Machine BS 160 Key Facts BS 160: The machine comprises a main frame made of special aluminium and a hydraulic cylinder up to 600 bar. By means of the bending bars R=11 mm and R=5 mm and a height adjustment feature, all busbars up to max. 160 mm width can be bent in different angles. The angle scale is engraved in the upper section. Conversion from bending to punching is simple and easy. ALFRA BS 160 with bending die and bending punch R=11 mm for busbar 9-12 mm Bending: Cu max.: 160 x 12 mm Bending angle up to: 92 Smallest leg length: 50 mm inside dimension Smallest U-bending: 160 mm inside dimension Smallest Z-bending: 55 mm (depending on material) inside dimension Punching: Punching Cu max.: Recommended type of drive: Ø mm including oblong holes up to max. L = 21 mm Material thickness Cu max.: 12 mm Material width up to: 160 mm centric Dimensions L x W x H: 390 x 150 x 330 mm 20 kg Electro-hydraulic pump AHP Punches and dies available Punch Ø mm Metric screw connection 6.6 x 6.0 up to 5 mm material thickness x 8.0 up to 6 mm material thickness x 8.0 up to 6 mm material thickness x 10.0 up to 12 mm material thickness x 10.0 up to 12 mm material thickness x 12.0 up to 12 mm material thickness x 12.0 up to 12 mm material thickness o 16.0 up to 12 mm material thickness o 16.0 up to 12 mm material thickness o 20.0 up to 12 mm material thickness o 20.0 up to 12 mm material thickness x with neoprene stripper and pressure plate o with neoprene stripper without pressure plate Dies -S- Dies -L- max. mat. thickness max. mat. thickness Punches and dies for oblong holes up to Prod.-No max. L x W = 21 x 18 mm up to 5 mm material thickness up to 12 mm material thickness 03241
5 Sawing 9" RotaSpeed ALFRA Circular Saw RotaDry " Saw Powerful 1800 watt motor Double insulated Oil bath gear case Lower guard lever Chip collector cover one knob removal The new worm drive metal cutting saw cuts longer and farther with high torque output. Power: 1800 watts, 15 amps V 50/60HZ Speed: 2300 rpm Arbor: 1" Blade Diameter: 9" Mitre: 0-45 Cutting capacity at 0 : 3-1/4" Cutting capacity at 45 : 2-1/4" 18 lbs Sound power: 95.5 db Sound pressure: 93.8 db Most rugged and versatile 14" saw available on the market today Cold cutting Safety trigger switch Large capacity chip tray Large heavy duty base Power: 1400 watts, 13 amps V 50/60HZ Speed: 3800 rpm Arbor: 20 mm Blade Diameter: 7-1/4" Mitre: 0-45 Cutting capacity at 0 : 2-3/8" Cutting capacity at 45 : 1-9/16" 15 lbs Sound power: 98.0 db Sound pressure: 88.0 db RD355 ALFRA USA offers XT German Quality Circular Saw Blades Description " Steel Bld, 2.2/2.6 w/20mm arbor, 34T " Aluminum Bld, 2.8/2.0 20mm arbor, 48T " Steel Bld, 2.0/1.6 w/ arbor, 42T " Aluminum, 2.8/2.0, w/20mm arbor, 54T " Steel, 2.0/1.6, w/1" arbor, 48T " Aluminum, 2.8/2.2, w/1" arbor, 62T " Steel, 2.6/2.2 w/1" arbor, 72T
6 Punching APS APS Punches Double Action ALFRA-Press APS 70 APS 120 Max. hole Ø mm 7/8" 22 mm 1-1/16" 27 mm Oblong holes max. 7/8" x 9/16" 22 x 14 mm 1" x 11/16" 25 x 18 mm Max. material thickness when 1/2" 13 mm 5/8" 16 mm working on St. 42 Total punching time with Pump SC 05 II-B 10 sec. 15 sec. with Pump SC 17 5 sec. 8 sec. Throat depth 2-3/4" 70 mm 4-3/8 " 110 mm Max. pressure psi psi Punching power 30 t 44 t Punch stroke 11/16" 18 mm 25/32" 20 mm Weight 66 lbs 29.9 kg 104 lbs 47.3 kg Contents include: Punching Unit, control cable and hydraulic hose 16 ft, wrench, depth fence, suspension hook ALFRA-Press Max. hole Ø mm Max. oblong holes Max. material thickness when working on steel 42 Total punching time with pump SC 17-D Throat depth Max. pressure Punching power Punch stroke Weight APS 110D 1-1/16" 27 mm 1" x 11/16" 25 x 18 mm 5/8" 16 mm 8 sec. 4-3/8" 110 mm psi 44 t 25/32" 20 mm 85 lbs 38.5 kg Contents include: APS 110 D Punching Unit, control cable and hydraulic hose 16 ft, wrench, depth fence, suspension hook. SC 17D - for APs 110D Working pressure max. Pump capacity lbs/cm kg/cm 2 (10670 psi) 0.43 Gal/min at 1370 rpm Oil quantity 4 1/2 Gal 17 l Single phase motor 1500 W 110v 60 HZ 1370 rpm Weight incl. oil 45 kg and transport rollers 148 lbs 67 kg Dimensions (L x W x H) /16" x 14-9/16" x 22-1/16" 550 x 370 x 560 mm Balancers Electro Hydraulic Pumps For ALFRA Press Hydraulic Punching Units With blocking device, spring fracture safety device, length of cable 6 ft 9363 B lbs kg B lbs kg B lbs kg according to EN Attention: Actuation of spring hoist only with suspended Punching Unit resp. under load. Punches and Dies Working pressure max lbs/cm2 750 kg/cm 2 (10670 psi) SC 05 II-B for APs 70, 120 SC 17 for APs 70, lbs/cm2 750 kg/cm 2 (10670 psi) Pump capacity 0.2 Gal/min at 2770 rpm 0.43 Gal/min at 1370 rpm Oil quantity 1 1/3 Gal 5 l 4 1/2 Gal 17 l Single phase motor 2770 rpm 1100 W 110v 60 HZ 1500 W 110v 60 HZ Weight incl. oil and roll bar 62.2 lbs 28.2 kg 141 lbs 64 kg Dimensions (L x W x H) 21-11/16" x 14-9/16" x 22-1/16" 550 x 370 x 560 mm Subject to our general sales conditions. Accessories for APS 70/120 Punches Dies Size Size 3/ / ½ ½ / / / / mm mm / / / / Distributor Info: 06/2015
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
More informationALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationConnect. Cable preparation and cutting tools
Connect Cable preparation and cutting tools 390 Our range of cable preparation tools includes hand-operated & ratchet action cable cutting tools, wire preparation & stripping tools and SWA & hydraulic
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationModular and Flexible. We want to make it easier for you! Innovative Riveting System. with blind rivet adapter BR 20. with blind rivet adapter BR 50
Modular and Flexible Innovative Riveting System 800 bar with blind rivet adapter BR 20 We want to make it easier for you! with blind rivet adapter BR 50 Engineered and Designed by with blind rivet nut
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationTHE ORIGINAL NAME IN HOLE CUTTING SYSTEMS
THE ORIGINAL NAME IN HOLE CUTTING SYSTEMS ABOUT US About Rotabroach Rotabroach is the original name in annular cutting technology. With over 40 years of experience in our industry, we have developed the
More informationCORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationTaps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationMakes bends greater than 90 in a single operation
TurnPro Tools TurnPro Indexing Tube Bender TurnPro HTB Indexing Handle Tube Bender Makes bends greater than 90 in a single operation Eliminates crossed handles Noassembly andreassembly ofbenderhandles
More informationWork Smart - Not Hard with a Blue Giant Lift Table
Lift Tables Hydraulic Lift Tables Eliminate the need to bend, twist and pick up heavy loads manually. Let BLUE GIANT Lift Tables increase productivity and decrease costly injuries caused by overexertion
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationCORDLESS TOOLS. People. Passion. Performance. WWW.CP-CORDLESS.COM FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS
CORDLESS TOOLS FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS People. Passion. Performance. WWW.CP-CORDLESS.COM Cordless Tools - Powered by Chicago Pneumatic 3 NO LIMITS Can you fix it? Can you reach it?
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63825-2170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-2100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationOPERATING INSTRUCTIONS FOR
OPERATING INSTRUCTIONS FOR MEDECO KEY MACHINES FOR MEDECO ORIGINAL, BIAXIAL, MEDECO 3, KEYMARK CLASSIC & KEYMARK X4 PRODUCTS MEDECO HIGH SECURITY LOCKS ASSUMES NO RESPONSIBILITY FOR INJURY OR PROPERTY
More informationCatalogue. electric- and cordless power tools. Products for sheet metal processing. Machine Tools / Power Tools Laser Technology / Electronics
Catalogue electric- and cordless power tools Products for sheet metal processing Machine Tools / Power Tools Laser Technology / Electronics Innovative tools Contents: 2 Page Page Page 4 8 9 New battery
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationLOADING DOCK EQUIPMENT. A. Section 03100 - Concrete Forms and Accessories: Placement of anchors into concrete.
LOADING DOCK EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Loading dock equipment of the following types: 1. Dock lifts. 2. Control stations. 1.2 RELATED SECTIONS A. Section 03100 - Concrete Forms and
More informationHow To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
More informationFor mechanical & hydraulic presses Inch & metric taps
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Professional IDT TM In-Die Tapping Catalog For mechanical & hydraulic presses Inch & metric taps www.danly.com Professional IDT TM In-Die Tapping Service
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More information18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS
18. SKATES, PLATFORM HAND TRUCKS, LIFTING TABLES AND HAND TROLLEYS SKATES LIFTING TABLES HAND TROLLEYS PLATFORM HAND TRUCKS SKATES SKATE 1500KG for moving machines and equipment duration oiled metal wheels
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationDUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationIDT TM IN-DIE TAPPING
IDT TM IN-DIE TAPPING In-Die Tapping PAGE NUMBER HY1024 Series 1 ME1024 Series 2 LP25M6 & LP516M8 Series 3 Accessories and Replacement Parts LP Extensions 4 Forming Taps 5 Pitch Inserts and Tapholders
More informationEXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions
EXPLORE 4-Leg Teaming Table with Screen Share Monitor Display Requirements: your flat panel display must confirm to the following requirements. y With the stand removed, the monitor must not exceed 40
More informationServo/Hydraulic Press Brake. HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204
Servo/Hydraulic Press Brake HG Series HG 5020, HG 8025, HG 1303, HG 1703 HG 1704, HG 2203, HG 2204 The HG Series Press Brake An ultra-high precision, high-speed compact bending solution featuring an advanced
More informationUniversal systems for frameless doors
EN Universal systems for frameless doors Xinnix Door Systems designs, creates and manufactures systems for internal doors. With our construction elements, it is possible to obtain easily an elegant and
More informationFALEX Four-Ball Extreme Pressure Test Machine
FALEX Four-Ball Extreme Pressure Test Machine The Four-Ball EP Test measures a lubricant s extreme pressure properties under High Hertzian contact in pure sliding, or pure rolling, motion. The test is
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationWeeke CNC Machining Center, Model BHC 550 NB
Weeke CNC Machining Center, Model BHC 550 NB Weeke's BHC-550 NB is a truly industrial machine designed primarily for boring and routing of flat components that have been nested into full sheets of material.
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationSTT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process
STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder
More informationwww.huskietools.com 71
www.huskietools.com 71 S-Series Hydraulic Handheld Cutters P. 75 Ratchet Cable Cutters P. 73 Low Pressure Cable Cutter P. 79 SP-Series Hydraulic Handheld Cutter Heads P. 77 Cable and Insulation Strippers
More informationEVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationFTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
More informationLOW VOLTAGE D.C. MOTORS & GEARBOX UNITS
LOW D.C. MOTORS & GEARBOX UNITS Printed on 100% recycled paper. 918D SERIES SINGLE RATIO METAL GEARBOX (RE280 MOTOR/RE 280/1 MOTOR) NEW! NEW! NEW! NEW! NEW! WITH 2mm OUTPUT SHAFT (15:1 ONLY) WITH 4mm OUTPUT
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationOperating instructions. SCORP 220 Plus SCORP 360. Pipe Cutter. Code 790 014 762 Machine-no.:
precision. power. simplicity. Operating instructions Pipe Cutter SCORP 220 Plus SCORP 360 Code 790 014 762 Machine-no.: All rights reserved, in particular the rights of duplication and distribution as
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationStock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
More informationStep-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationCHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More information5.2. Overview. The better method to install solderless compression connectors on power cable
5.2 Overview The better method to install solderless compression connectors on power cable The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationHEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
More informationFailure to comply with the following cautions and warnings could cause equipment damage and personal injury.
1.0 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. Shipping Damage is not covered by warranty. If shipping damage is found, notify carrier at once. The carrier is
More informationHAND PUMP OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 767 HAND PUMP Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this tool could
More informationManual for GlobePharma Mini-Press II Rotary Tablet Press
1 of 13 Preparing the Rotary Press 1. Make sure the rotary press is unplugged. 2. Open the bottom cabinet of the rotary press and take out the grey tool kit, and the beige box of punches and dies. 3. Take
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More informationMAXX-Mini Lift Portable Lift Table. MAXX-JACK Electric High Lift MAXX-JACK Pallet Truck. MAXX-Mobile Tilt & Lift
MAXX-Mini Lift Portable Lift Table MAXX-JACK Electric High Lift MAXX-JACK Pallet Truck MAXX-Mobile Tilt & Lift MAXX-MINI-Lift Tote & Platform Lift Electric MAXX-MOBILE SKID LIFTER Manual & Electric Lift
More informationPermanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
More informationOWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80
OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without
More informationPUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
More informationV1504 Vertical Platform Lift OWNER S MANUAL
V1504 Vertical Platform Lift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000692 03-m12-2013 2 IMPORTANT Ensure that only an authorized Savaria Dealer
More informationV1504 Vertical Platform Lift OWNER S MANUAL
V1504 Vertical Platform Lift OWNER S MANUAL (To Be Retained by Owner After Installation by Authorized Savaria Dealer) Part No. 000692 01-m03-2016 2 IMPORTANT Ensure that only an authorized Savaria Dealer
More information