Stock List: >>Offset- Printing Machines

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Stock List: >>Offset- Printing Machines"

Transcription

1 >>Offset- Printing Machines Heidelberg GTO Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional dampening, - Single- sheet feeder with pre- stacking unit, - Weight kg,

2 >>Letterpress Heidelberg OHT - Tiegel size 26 x 38 cm, - 2 closing frames, - Several accessoires, - Weight kg,

3 Stapler Nagel - Type ENAK , - Manual stapler for pads up to 170 sheets, - Staple length 6-20 mm, - Staple types 50, - Throat depth 130 mm Stapler Nagel - Type Tak 18 - Stapler for pads up to 140 sheets, - Staple length 6-18 mm, - Staple type 50, - Throat depth 30 mm, - Table dimension 310 x 190 mm, - Adjustable backgauge, - Safety device, - Foot switch,

4 Gluing machine Tränklein - Two roller gluing system, mm working size, - Works with cold glue, - Scrapers for an equal glue application, - Glue quantity adjustable, - Glue tray made of brass, - Pressure bar attachment for cardboards, - Easy handling, Gluing machine Sumbel - Two roller gluing system, mm working size, - Works with cold glue, - Motor speed continuously adjustable, - Scrapers for an equal glue application, - Glue quantity adjustable, - Glue tray made of brass, - Easy handling, Edge Gluing machine - Type Tränklein, - Single Roller Edge Gluer, - Adjustable working size 60 mm, - 2 side scrapers, - Height adjustable glue tank, - Mounted on coated plate,,

5 Foil- cutting machine G.S Working width up to 74 cm, - Optimal appropriate for stamp- foil, - Easy handling, - Sliding arm with knife is adjustable for any position on the bar, - quick clamp- mechanism for fast foil change Laminator DuPont - Type Duo Lam A3, - Mach. Nr. T1BH 4006, - Manufacturing year 1994, - Working width 40 cm, - 2 laminate units with heated rolls, - Adjustable temperature from 110 C max. 160 C, - Temperature indication over electronic display, - Hand application, - For hand and feed operation, Spindle press Type Schandl - Format 40 x 50 cm, - Manufactured in our special factory, - Heavy steel construction, - Spindle with axial- thrust bearing, - Hand- wheel from Alu- cast, - Weight approx. 80kg, - Underframe on request

6 Card- board cutting machine - With cutting length 110 cm, 125 cm, 150 cm available. - Narrow strip cutting device Loop- machine Hang - Type Piccolo III, - Hand operation, - For loops with 4,5 mm diameter Corner- die cutter - 1 over and under knive sharpened

7 4- spindle Paper drilling machine - Type Nagel Citoborma 480AB, - Model 1989, - Pile height 60 mm, - Table width 480 mm, - Adjustable spindle distance mm, - Foot switch, - Sliding table with measuring scale, - Weight 280 kg, 1- spindle Paper drilling- machine - Type Hang, - Table with adjustable sidestop, - Heavy version, - Pile height 50 mm, Book edge rounding machine Hunkeler - Type BRM 50, - Working width 50 cm, - Book thickness mm, - Book thickness with hand wheel adjustable, - Weight 350 kg, - Noiseless operation, - Dimensions: B x H x T: 70 x 120 x 65 cm

8 Electical Spindle press Hunkeler - Press size 45 x 72 cm, Collator KAS - Type Spacesaver, - 10 stations, - Format A4, - Counter, - Sort delivery, - Easy handling, Sewing machine Brehmer Polygraph - Type 39 3/4, - Manufacturing year 1964, - With all accessories, - Weight 475 kg,

9 Creasing a. Perforating machine Pernuma - Type 1485K, - Model Working width 70 cm, - Max. 20 sheets, - 1 perforating tool, - 1 creasing tool, Creasing a. Perforating machine Bickel - Type HK 3/61, - Working width 61 cm, - Max. 20 sheets, - Manufacturing year 1971, - 1 perforating tool, - 1 creasing tool, / 50Hz Cardboard Creasing- machine - Type Sächs. Masch. AG, - Working width 75 cm, - Adjustable crease, / 380V

10 Die cutting platen Monopol - Max. Format 40 x 60 cm, - Closing frame a. several accessories, - speed continuously adjustable, - Weight 1.500kg, - Dimensions: B x H x T: 140 x 120 x 110 cm Die cutting platen Phönix - Format 36 x 60 cm, - Heavy cast steel construction, - Double printing marks, - Hand- feeding device, - 2 closing frames, - Various accessories, - Weight 2000 kg, - Dimensions: B x H x T: 130 x 110 x 120 cm The Die- Cutters are on the pictures partially dismanteld

11 >>Guillotines Machine on picture dismanteld Herold 82 - High- speed cutting machine, - Standard model, - Manufacturing year 1968, - Cutting width: 82 cm, - Table depth: 82 cm, - Cutting height: 8 cm, - Front table length: 48 cm, - Complete overhauled, - Hydraulic clamp, - Pressure continuously adjustable, - Electro- mechanical back gauge a. blade- drive, - Two hand- cutting mechanism, - Optical measurement, - 2 cutting knifes, - Weight approx. 800 kg, - Dimensions: B x H x T; 152 x 136 x 170 cm FL-76 - High- speed cutting machine, - Type FL-76 PR, - Manufacturing year 1986, - Cutting width: 76 cm, - Hydraulic clamp, - Pressure continuously adjustable, - Program control IC, - Digital Display, - Air- tables, - Optical cutting device, - Two hand- cutting mechanism, - Light- barriers, - Safety covers, - 2 cutting knifes, - Weight approx. 900 kg, - Dimensions: B x H x T: 342 x 138 x 190 cm

12 >>Guillotines Polar 72-CE - High- speed cutting machine, - Manufacturing year 1980, - Cutting width: 72 cm, - Table depth: 72 cm, - Hydraulic clamp, - Airtable, - Pressure continuously adjustable, - Electro- mechanical back gauge a. blade- drive, - Two hand- cutting mechanism, - Optical measurement, - Safety covers, - 2 hardened cutting knifes, - Weight approx. 850 kg,

13 >>Pre- Press equipment Plate- copy machine Sixt - Type UKK/ CNC, - Model 1987, - Mach. Nr , - Format 60 x 70 cm, - Litter- light, - Point- light, - Exposure times separate adjustable, - Input by keypad, Plate- copy machine Dicopa - Type P-806-G screen, - Format 115 x 95 cm, - Model 1990, - Upper exposure, - Litter- foil, Silk- screen printingcopy machine no picture - Format 110 x 140 cm, - Bacher steering,

NAGEL Staplers Simple. Fast. Precise.

NAGEL Staplers Simple. Fast. Precise. NAGEL Staplers Simple. Fast. Precise. NAGEL Multinak S Twin-headed stapler with electric drive 02 The perfect solution for your needs NAGEL-Enak 03 NAGEL Staplers and Staples Enak Manual flat stapling:

More information

Strip Cut $2, Cross Cut $2,999

Strip Cut $2, Cross Cut $2,999 DIRECT FUNCTION & PERFORMANCE for your office Valid 1st February to 30th April 2013 3104 Shredder Office shredder with feed opening suitable for A3. ECC Electronic Capacity Control: Prevents paper jams

More information

Strip Cut Cross Cut

Strip Cut Cross Cut OFFICE & Print Room YEARS IN NEW WITH AN AMAZING RANGE OF OFFERS 4860ET Guillotine Safety light curtains and patented two-step blade activating bars ensure quick and safe operation. Innovative touch pad

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

TS / TSX. hydraulic guillotine shears

TS / TSX. hydraulic guillotine shears ACO TS / TSX hydraulic guillotine shears ------------------------------------------------------------------------------------------------------------------------------------------- All HACO shears are

More information

PAINTING LINE GENERAL SPECIFICATIONS

PAINTING LINE GENERAL SPECIFICATIONS PAINTING LINE Page 1 / 17 Code Brand Model PAINTING LINE TECHNICAL INFORMATION: Working width: 1700 mm Working height: 1100 mm Dimensions of boards - thickness: 2 mm - 3,2 mm - width: 1000 mm - 1620 mm

More information

ARTI Bileme GRINDING & WELDING MACHINERY

ARTI Bileme GRINDING & WELDING MACHINERY UNIVERSAL TOOL GRINDER (Hydraulic Complete with PowerLock Unit) ARTI Bileme Universal Tool Grinding machine is designed specially to grind the tools used in window-door production and other types of cutter

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

Lift- and transport truck HTW 50/100 Standard model

Lift- and transport truck HTW 50/100 Standard model Lift- and transport truck HTW 50/100 Standard model The lift- and transport truck has a rugged, torsion-resistant frame structure, steel powder-coated (grey RAL 7035) with smoothly running, integrated

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

Accessories for GF and RA machines

Accessories for GF and RA machines Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling

More information

InForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley

InForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable

More information

Re-board Accessories

Re-board Accessories Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

TRIMMING UNIT/DIAMOND MACHINE TST.13

TRIMMING UNIT/DIAMOND MACHINE TST.13 TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.

More information

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt

More information

Vinfoil Infigo SF110 UFC module for UV Film Casting application

Vinfoil Infigo SF110 UFC module for UV Film Casting application Vinfoil Infigo SF110 UFC module for UV Film Casting application 1 2 What is UV Film Casting (UFC) The Cast and Cure process uses a holographic film in combination with a UV coating on any substrate to

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

DuPont Surfaces DUPONT TM CORIAN SOLID SURFACE 12mm GAUGE STANDARDIZATION

DuPont Surfaces DUPONT TM CORIAN SOLID SURFACE 12mm GAUGE STANDARDIZATION DuPont Surfaces DUPONT TM CORIAN SOLID SURFACE PRODUCT ADVISORY TABLE OF CONTENTS PAGE SECTION 1 A. Introduction 2 B. Bull-nose edge treatment 3 C. Ogee edge treatment on stacked edges 4 D. Coved Backsplashes

More information

NAGEL ECO 180 FLEXIBLE HONING SYSTEM

NAGEL ECO 180 FLEXIBLE HONING SYSTEM NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

Hydraulic Fabrication Centers and Punch Presses

Hydraulic Fabrication Centers and Punch Presses Hydraulic Fabrication Centers and Punch Presses Quality American Made Unbeatable Versatility Two-Cylinder/Two-Person Operation Multi-Stations Custom Built Machines to Meet Your Application Need 5 Station

More information

Donut Robot Mark I Mark VI

Donut Robot Mark I Mark VI The worldwide leader in donut production equipment +1.206.322.5474 info@belshaw.com www.belshaw.com AUTOMATIC FRYERS Donut Robot Mark I Mark VI Donut Robot Series Automatic Fryers deposit, fry, turn, and

More information

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2

1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2 TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION

More information

High-Speed Cutter N 137 PLUS

High-Speed Cutter N 137 PLUS High-Speed Cutter N 137 PLUS the programmable all-round model with 18.5'' colordisplay and Touch-Screen operation for all standard cutting work with graphical programming automation for an extensive automated

More information

Morgue refrigeration unit

Morgue refrigeration unit Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site

More information

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:

More information

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m

SUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable

More information

Sheet Metal Shearing & Bending

Sheet Metal Shearing & Bending Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal

More information

Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests

Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development

More information

Economy Combo Heat Press Manual Model No.: ECH-800

Economy Combo Heat Press Manual Model No.: ECH-800 Economy Combo Heat Press Manual Model No.: ECH-800 CONTENTS I. Assembly Drawing -----------------------------------------------------------------------------------2 II. Technical Parameters ------------------------------------------------------------------------------2

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

MODEL HSR-007 Direct Drive Rolling Steel

MODEL HSR-007 Direct Drive Rolling Steel MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

DIDO graf. Selling Guide BANKING AUTOMATION. Introduction

DIDO graf. Selling Guide BANKING AUTOMATION. Introduction BANKING AUTOMATION Selling Guide DIDO graf Introduction The concept behind the "DIDO" document dispensers manufactured by CTS electronics stems from the need to decentralize and make as widespread and

More information

ITB Ref Item Description QTY

ITB Ref Item Description QTY ITB Ref QTY F-01 Ordinary office desk 102 F-02 Round meeting table 2 F-03 Rectangular meeting table 1 F-04 Executive low cabinet 11 F-05 Executive desk with return 3 F-06 Square table 64 F-07 Closet 41

More information

Rolling - Introductory concepts

Rolling - Introductory concepts Rolling - Introductory concepts R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Rolling -

More information

Precise heavy-duty cutting

Precise heavy-duty cutting PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options

More information

T 300 Tray sealer. Automatic tray packaging in the smallest of spaces

T 300 Tray sealer. Automatic tray packaging in the smallest of spaces T 300 Tray sealer Automatic tray packaging in the smallest of spaces MULTIVAC T 300 T 300 Tray sealer: Automatic tray packaging in the smallest of spaces The especially compact T 300 tray sealer packs

More information

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels

More information

CLAMSHELL DIE CUTTER. General information

CLAMSHELL DIE CUTTER. General information 2013-1 General information Our clamshell die cutters are designed to die cut many different types of materials like Foam board up to 6 mm thick, laminated board up to 3 mm thick, corrugated board up to

More information

G-2. Space Management. Above the Desk Space Management. Tool Bars

G-2. Space Management. Above the Desk Space Management. Tool Bars Space Management Above the Desk Space Management Custom Accents Space Management is designed to create added workspace for the office environment. By placing often used desk items in easy to access storage

More information

Model 7090 Motor and Pump

Model 7090 Motor and Pump Model 7090 Motor and Pump 1 600695 Housing 1 6090 2 600696 Stator Assembly 1 6090 3 600648 Round Head Machine Screw (M5x60) 2 6090 4 600697 Armature Assembly 1 6090 5 600698 Bearing (6200) 2 6090 6 600115

More information

Dough Sheeting, Cutting and Laminating

Dough Sheeting, Cutting and Laminating 58 Dough Sheeting, Cutting and Laminating You need a highperformance dough sheeter or want to automate your operations to a greater degree. Our highly productive electronic dough sheeters are ideal for

More information

card punching/ die cutting equipment

card punching/ die cutting equipment card punching/ die cutting equipment Bürkle s Card Punching/Die Cutting Equipment provides a cost-effective solution addressing a wide range of applications. card body manufacturing systems 2 Card Punching/Die

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

HYDRAULICS. H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long

HYDRAULICS. H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long HYDRAULICS H91.8D/C - Computerized Open Surface Tilting Flow Channel - 10, 12.5, 15 and 20 m long 1. General The series of channels H91.8D has been designed by Didacta Italia to study the hydrodynamic

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining

CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque

More information

Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8

Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012

More information

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines On customer request it is possible to supply: Benches for PCB Oven for PCB Chemicals

More information

Skirt 1 / 4. The Skirt. The skirt patterns were downloaded from Mark's site but they need expanding before they can be used.

Skirt 1 / 4. The Skirt. The skirt patterns were downloaded from Mark's site but they need expanding before they can be used. Skirt 1 / 4 The Patterns The Skirt The skirt patterns were downloaded from Mark's site but they need expanding before they can be used. I used Corel Draw's real world dimensions to expand the patterns

More information

Butt Fusion Welding of HDPE Pipes Work Procedure

Butt Fusion Welding of HDPE Pipes Work Procedure Butt Fusion Welding of HDPE Pipes Work Procedure A pipeline is as good as its weakest point. Accordingly it is not only important that quality pipes and components are used in a piping system, but also

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

Table of contents CAT DISC 25. Mower

Table of contents CAT DISC 25. Mower Mower CAT DISC 25 ( Type PTM 370 : +.. 01001 ) Excerpt from operating manual Nr. 0370B00C.pdf Table of contents Swath Discs... 13 Swath Boards... 13 Safety points... 14 General maintenance hints... 14

More information

Double Rotary Tablet Press. (Pharma Press Gmp Model) Instrumented Tablet Press (Pharma Press-II)

Double Rotary Tablet Press. (Pharma Press Gmp Model) Instrumented Tablet Press (Pharma Press-II) Press (Pharma Mega Press Gmp Model) Press (Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Press (Pharma Mega Press Gmp Model)

More information

POWERS Controls. Technical Instructions Document No P25 AP March 5, No. 6 Pneumatic Damper Actuator.

POWERS Controls. Technical Instructions Document No P25 AP March 5, No. 6 Pneumatic Damper Actuator. POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 Description 331-2793 Actuator 331-2857 Actuator 331-3012 Extended Shaft and Frame with Clevis and Pin Mounting The POWERS

More information

Equipment Information

Equipment Information 2070C Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

14. Tools and Software

14. Tools and Software 14. Tools and Software System overview: Geberit welding machine MEDIA 160 and tools... 364 System overview: Geberit welding machine UNIVERSAL 315 and tools... 365 14.1 Tools for Geberit Silent-db20 / Geberit

More information

PPM HYDRAULIC PRESSBRAKES

PPM HYDRAULIC PRESSBRAKES PPM HYDRAULIC PRESSBRAKES PPM Hydraulic pressbrakes Our long experience in producing hydraulic pressbrakes, as well conventional as CNC controlled, enables us to bring to our customers a solid engineered,

More information

Material test chamber with mechanical convection

Material test chamber with mechanical convection FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and

More information

AB 500-2 and AB 600-2

AB 500-2 and AB 600-2 AB 500-2 and AB 600-2 VÖGELE Extending Screeds AB 500-2 /AB 600-2 Maximum Pave Width - AB 500-2: 8.5m - AB 600-2: 9.5m Basic Width - AB 500-2: 2.55m - AB 600-2: Screed Versions TV, TP1, TP2 VÖGELE AB 500-2

More information

The five main types of printing are:

The five main types of printing are: The five main types of printing are: Relief- Letterpress, Block printing, Flexography (foil blocking) Planographic (flat plate printing)- Lithography & offset lithography Intaglio (etching) Gravure, Screen

More information

Technical Specifications RFQ-HTOC (GM)

Technical Specifications RFQ-HTOC (GM) Technical Specifications RFQ-HTOC-77684-14-19553(GM) HOUSING FURNITURE for delivery DAP GONAIVES, HAITI Items list: Item Number Code Equipment Tender Quantity 1 E-21.01.00 Beds, Double 2 2 E-21.02.00 Beds,

More information

Industrial magnetic products and tools

Industrial magnetic products and tools Industrial magnetic products and tools M Products and tools for industrial applications akker Magnetics, established in 1971, is a leading producer of magnetic products and industrial systems based on

More information

UNIVERSAL RAILING, STEEL

UNIVERSAL RAILING, STEEL RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL

More information

DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements

DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,

More information

Cityline Express. CITYLINE EXPRESS 4 Page Newspaper Offset Press

Cityline Express. CITYLINE EXPRESS 4 Page Newspaper Offset Press CITYLINE EXPRESS 4 Page Newspaper Offset Press us on dules very ility les ents. ingle stable,000 ased ready LINE inting ents, sures is proo date cessr r CITYLINE CITYLINE EXPRESS puts puts puts its its

More information

Optiffuser. High-performance, high bandwidth lightweight 1D diffuser.

Optiffuser. High-performance, high bandwidth lightweight 1D diffuser. Optiffuser High-performance, high bandwidth lightweight 1D diffuser. General product information The Optiffuser comes in packs of four panels. Two positives and two negatives (see page 5) per package.

More information

Finishing Systems for Coating and Printing

Finishing Systems for Coating and Printing Finishing Systems for Coating and Printing MADE IN AUSTRIA autumn 2015 www.zimmer-austria.com page 1 FINISHING SYSTEMS FOR COATING AND PRINTING the multipurpose coating system for textiles, plastics, nonwovens,

More information

Thermal Hole Punch Catalog

Thermal Hole Punch Catalog Thermal Hole Punch Catalog Model shown: RX-75-PM4-WK Three-hole multi-punch (see page 2) NOVA TECH International offers several types of machines for melting holes, slots and shapes into synthetic materials,

More information

HOLZMA HPP 350 with Cadmatic 4.0

HOLZMA HPP 350 with Cadmatic 4.0 Holzma s HPP 350 is a flexible saw center. This CNC controlled machine features fast, simple programming coupled with high operating speeds to meet today s varied production requirements. Designed for

More information

FAG Hydraulic nuts. Technical Product Information

FAG Hydraulic nuts. Technical Product Information FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables

More information

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale

More information

InForm Tables and Base Cabinets

InForm Tables and Base Cabinets System tables 30 mm thick, coated with laminate, selection of 3 different front edges: Postformed edge, 70 mm high Edge band, 3 mm thick FlexiLine edge, replaceable. Permitted surface load on the tabletop:

More information

SERVER ROOM CABINET INSTALLATION CONCEPTS

SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

Mikron XT-one. Dual spindle, 5 axis, flexible production center

Mikron XT-one. Dual spindle, 5 axis, flexible production center Mikron XT-one Dual spindle, 5 axis, flexible production center 1 Mikron XT-one Dual spindle, 5 axis, flexible production center The Mikron XT-one machining center is worldwide amongst the most versatile

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance [ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable

More information

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3

PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3 PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing

More information

HIGH FREQUENCY SEALING MACHINE FOR QUALITY SEALING

HIGH FREQUENCY SEALING MACHINE FOR QUALITY SEALING HIGH FREQUENCY SEALING MACHINE FOR QUALITY SEALING SEAL@TRON 10 kw Bar Model PROPOSED CONFIGURATIONS Bar sealer (up to 72") Die Mounting plate sealer (heated or not) OPTIONAL AUTOMATION EQUIPMENT AND SERVICES

More information

Cutting and stripping tools

Cutting and stripping tools Cutting and stripping tools Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting

More information

Perfection in packaging

Perfection in packaging BRUNNER GMBH u. Co. KG Verpackungsmaschinen Perfection in packaging Made in Germany by BVM BVM-Assembly Customers are the centre of all our business activities. Customers' requirements and demands guide

More information

MB-Accumulator Operator's Manual

MB-Accumulator Operator's Manual Mathias Bäuerle GmbH Gewerbehallestraße 7-11 D-78112 St.Georgen Telefon (07724) 882-0 Telefax (07724) 882-111 Internet: http://www.mbfold.de E-mail: center@mbfold.de MB-Accumulator Operator's Manual CONTENTS

More information

Chimney systems ICOPAL WULKAN C/CI/C-eko/CI-eko

Chimney systems ICOPAL WULKAN C/CI/C-eko/CI-eko INSTALLATION MANUAL Chimney systems ICOPAL WULKAN C/CI/C-eko/CI-eko Ventilated Notified entity Building Technical and Research Institute Prague notification no. 1020 This instruction refers to double-layer

More information

TruBend: More. bending. freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology

TruBend: More. bending. freedom. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TruBend: More bending freedom Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Precise bending. More flexible than ever before. The TRUMPF Group is one of the world s leading

More information

High Security Heavy Duty Shredders VZ 14.00. Perfect shredding and high performance in DIN security levels 4 and 5

High Security Heavy Duty Shredders VZ 14.00. Perfect shredding and high performance in DIN security levels 4 and 5 High Security Heavy Duty Shredders Perfect shredding and high performance in DIN security levels 4 and 5 Documentation High Security Heavy Duty Shredders / Page 1of 5 Perfect shredding and high performance.

More information

SCREEN PRINTING INSTRUCTIONS

SCREEN PRINTING INSTRUCTIONS SCREEN PRINTING INSTRUCTIONS For Photo-Imageable Solder Masks and Idents Type 5600 Two Part Solder Masks and Idents Mega Electronics Ltd., Mega House, Grip Industrial Estate, Linton, Cambridge, ENGLAND

More information

Streamer. Perfect Edging for your Products PRODUCTIVITY AND PRECISION

Streamer. Perfect Edging for your Products PRODUCTIVITY AND PRECISION Edgebanders CNC Machining Centers Vertical Panel Saws Pressure Beam Saws Panel Handling Perfect Edging for your Products Streamer PRODUCTIVITY AND PRECISION Optimum Price/Performance Ratio with HOLZ-HER

More information

Linkeo 19" freestanding cabinets

Linkeo 19 freestanding cabinets 87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3

More information

VIKING LONGSHIP, 11th century

VIKING LONGSHIP, 11th century VIKING LONGSHIP, 11th century SCALE: 1/35 Length: 850mm Width: 370mm Height: 475mm HISTORY: This model represents the similar long ship which was found near the village of Skuldelev at Denmark and which

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information