Conformal, Single In-Line Thin Film Resistor, Through Hole Network (Standard)

Transcription

1 VTF (Standard) Conformal, Single In-Line Thin Film Resistor, Through Hole Network (Standard) resistor networks are designed to be used in analog circuits in conjunction with operational amplifiers. Engineers can use these circuits to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. This family of standard resistor networks will continually be expanded with new and innovative designs, and Vishay Dale Thin Film stocks most designs in house for off-the-shelf convenience. However, if you can not find the standard network you need, call applications engineering at (76) , as we may be able to meet your requirements with a semicustom match for a quick delivery. For standard networks with tighter specifications, or for custom networks, contact Applications Engineering at the above number. For a quick review of typical applications, request Vishay s guide to understanding and using thin film precision networks. SCHEMATIC = L = Total length = 0.320" (8.3 mm) max. Except PN 28 where seated height = 0.342" (8.69 mm) max. 2 3 FEATURES Off-the-shelf delivery Wide variety of standards Available Small size (SIP) Available Standard designs - no NRE Low capacitance < 0. pf/pin Flame resistant (UL 94 V-0 rating) Material categorization: for definitions of compliance please see Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-rohs-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE Complete electrical specifications at the end of schematics. TWO EQUAL RESISTORS ORDERING INFORMATION ( =) TRACKING TC0 2 ABSOLUTE RATIO TOL K: VTF209UF 50K: VTF24UF 2K: VTF20UF 00K: VTF25UF 5K: VTF2UF 200K: VTF26UF 0K: VTF22UF 500K: VTF27UF 20K: VTF23UF M: VTF28UF e.g: VTF209SUF + = 0K, 00K, M + = 0 RATIO DIVIDE0: ORDERING INFORMATION ( + =) 9K + K = 0K: VTF280UF 90K + 0K = 00K: VTF93UF 900K + 00K = M: VTF28UF 2 3 e.g: VTF280SUF L = Total length = 0.320" (8.3 mm) max. Except PN 28 where seated height = 0.362" (9.9 mm) max. Revision: 4-Mar-6 Document Number: 60038

2 VTF (Standard) = 00K, M DIVIDER NETWORK 0: ORDERING INFORMATION ( =) = 0 00K: VTF282UF 2 3 L = Total length = 0.320" (8.3 mm) max. Except PN 283 where seated height = 0.362" (9.9 mm) max. M: VTF283UF = 2 L = Total length = 0.420" (0.67 mm) max. 3 4 TWO EQUAL RESISTORS - ISOLATED ORDERING INFORMATION ( =) K: VTF365UF 50K: VTF000UF 2K: VTF997UF 00K: VTF348UF 5K: VTF998UF 200K: VTF05UF 0K: VTF363UF 500K: VTF06UF 20K: VTF04UF M: VTF03UF 25K: VTF999UF e.g: VTF209SUF RATIO DIVIDE0: AND 00: + + R 3 = 00K R 3 ORDERING INFORMATION (R + R2 + R3 =) + + R 3 = 00 R R 3 = 0 + R 3 90K 9K K K: VTF330UF e.g: VTF330SUF L = Total length = 0.420" (0.67 mm) max. = = R 3 = R 4 = 0K, 00K R 3 R L = Total length = 0.520" (3.2 mm) max. FOUR EQUAL RESISTORS ONE COMMON ORDERING INFORMATION ( =) 0K: VTF366UF 00K: VTF367UF e.g: VTF366SUF = 0K = R 3 DIVIDER NETWORK 2: ORDERING INFORMATION R 3 = x + 0K 0K 5K L = (3.2 mm), H = (7. mm) max. VTF087UF e.g: VTF087SUF Revision: 4-Mar-6 2 Document Number: 60038

3 VTF (Standard) = 0K R 3 DIVIDER NETWORK 2: ORDERING INFORMATION = 2 0K 20K 6.667K VTF088UF R 3 = x e.g: VTF088SUF L = 0.520" (3.2 mm), H = 0.280" (7. mm) max. = 0K R 3 DIVIDER NETWORK 5: ORDERING INFORMATION = 5 0K 50K 8.333K VTF089UF R 3 = x e.g: VTF089SUF L = 0.520" (3.2 mm), H = 0.280" (7. mm) max. = 0K = 0 R 3 = x + Note: TCR Tracking 3 ppm/ C R 3 0K 00K 9.09K L = 0.520" (3.2 mm), H = 0.280" (7. mm) max. DIVIDER NETWORK 0: ORDERING INFORMATION VTF090UF e.g: VTF090SUF = 5K, 0K, 00K, M = L = Total length = 0.620" (5.75 mm) max. Except PN 287 seated height = 0.362" (9.9 mm) max. DIVIDER NETWORK : ORDERING INFORMATION ( =) 5K: VTF225UF 0K: VTF286UF 00K: VTF29UF M: VTF287UF e.g: VTF225SUF = 0K, 00K = 2 DIVIDER NETWORK 2: ORDERING INFORMATION ( =) 0K: VTF009UF L = Total length = 0.620" (5.75 mm) max. 00K: VTF00UF e.g: VTF009SUF Revision: 4-Mar-6 3 Document Number: 60038

4 VTF (Standard) = 0K, 00K DIVIDER NETWORK 5: ORDERING INFORMATION ( =) = 5 0K: VTF007UF L = Total length = 0.620" (5.75 mm) max. 00K: VTF008UF e.g: VTF007SUF = 0K = 0 DIVIDER NETWORK 0: ORDERING INFORMATION ( =) 0K: VTF220UF L = Total length = 0.620" (5.75 mm) max. e.g: VTF220SUF = 0K, 00K, M = L = Total length = 0.620" (5.75 mm) max. Except PN 285 seated height = 0.320" (8.3 mm) max. DIVIDER NETWORK 0: ORDERING INFORMATION ( =) 0K: VTF328UF 00K: VTF284UF M: VTF285UF e.g: VTF328SUF = 0K, 50K, 200K, M = L = Total length = 0.620" (5.75 mm) max. DIVIDER NETWORK 20: ORDERING INFORMATION ( =) 0K: VTF073UF 50K: VTF074UF 200K: VTF07UF M: VTF08UF e.g: VTF073SUF = M DIVIDER NETWORK 00: ORDERING INFORMATION ( =) = M: VTF09UF e.g: VTF09SUF Revision: 4-Mar-6 4 Document Number: 60038

5 Common mode Division ratio 250, 00, 50 = R 3 = M = 4K, 0K, 20K R 4 = 3.984K, 9.90K, 9.608K R 5 = 900K, 950K, 975K R 6 = 00K, 50K, 25K SIX RESISTOR NETWORK VTF (Standard) (Designed for unity gain/high common mode voltage rejection differential amplifier) ORDERING INFORMATION ( / =) Devision Ratio = 250: VTF442UF 00: VTF443UF R 5 R 6 R 4 R 3 M M 50: VTF444UF e.g: VTF442SUF L = Total length = 0.720" (8.29 mm) max. H = Seated height = 0.360" (9.4 mm) max. Maximum voltage to pins 3 and 7 is 300 V = K, 0K, 25K, 50K, 00K L = Total length = 0.820" (20.83 mm) max. FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION ( =) K: VTF329UF 2K: VTF00UF 5K: VTF002UF 0K: VTF58UF 25K: VTF003UF 50K: VTF004UF 00K: VTF288UF e.g: VTF329SUF = K, 0K, 00K FOUR EQUAL RESISTORS ISOLATED ORDERING INFORMATION ( =) K: VTF005UF 0K: VTF006UF K: VTF37UF Absolute tolerance = 0. % Ratio tolerance = 0. % L = Total length = 0.820" (20.83 mm) max. e.g: VTF005SUF Revision: 4-Mar-6 5 Document Number: 60038

6 VTF (Standard) EIGHT EQUAL RESISTORS ONE COMMON ORDERING INFORMATION ( =) = = R 3 = R 4 = R 5 = R 6 = R 7 = R 8 = 0K, 00K R 3 R 4 R 5 R 6 R 7 R K: VTF368UF 00K: VTF369UF e.g: VTF368SUF L = Total length = 0.920" (23.37 mm) max. EIGHT RESISTOR NETWORK (Designed for instrument amplifier with shield driver) 0K K 9K K K 9K K 0K Ref ORDERING INFORMATION VTF272UF e.g: VTF272SUF L = Total length = 0.920" (23.37 mm) max. R = 0K, K R R R R R R R 2R EIGHT BIT R/2R LADDER NETWORK ORDERING INFORMATION (R =) (± /2 LSB) 0K: VTF072UF 00K: VTF267UF e.g: VTF072SUF L = Total length =.020" (25.9 mm) max. = K K 2K 4K 8K 6K 32K 64K 28K 256K R 3 R 4 R 5 R 6 R 7 R 8 R RESISTANCE DOUBLER ORDERING INFORMATION VTF0UF e.g: VTF0SUF Absolute tolerance = ± 0. % Ratio tolerance = ± 0. % TCR tracking = ± 3 ppm/ C L = Total length =.02" (25.9 mm) max. Revision: 4-Mar-6 6 Document Number: 60038

7 VTF (Standard) STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 3 to 0 - Resistance Range 00 to 2 M total - TCR: Absolute ± 0 ppm/ C () 0 C to +70 C TCR: Tracking ± 2 ppm/ C () 0 C to +70 C Tolerance: Absolute ± 0. % +25 C Tolerance: Ratio ± 0.02 % +25 C Power Rating: Resistor 00 mw - Power Rating: Package 500 mw - Stability: Absolute R ± 0.05 % 2000 h at +70 C Stability: Ratio R ± 0.05 % 2000 h at +70 C Voltage Coefficient ± 0.0 ppm/v - Working Voltage 00 V - Operating Temperature Range 0 C to +70 C - Storage Temperature Range -55 C to +25 C - Noise < - 35 db - Thermal EMF < 0. μv/ C - Shelf Life Stability: Absolute R ± 0.0 % year at +25 C Shelf Life Stability: Ratio R ± % year at +25 C Note () TCR over -55 C to +25 C ± 20 ppm/ C absolute, ± 3 ppm/ C tracking DIMENSIONS AND IMPRINTING in inches and millimeters Part Number Date Code E DIMENSION INCHES MILLIMETERS Pin A 0.25 min. 3.7 Vishay Logo B H A B 0.00 min C typ. D typ ± 0.5 C L D F E 0.00 max F 0.00 typ Note L and H (length and height) dimensions for each model are found alongside the schematic drawing MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Tin/Lead Option Lead (Pb)-free Option Tin/Lead and Lead (Pb)-free Finish Passivated nichrome Alumina Epoxy coated Copper alloy Sn60 - Sn63 Sn96.5, Ag3.0, Cu0.5 Hot solder dip Revision: 4-Mar-6 7 Document Number: 60038

8 VTF (Standard) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF2UF V T F 2 U F V T F S U F GLOBAL MODEL PART NUMBER (3 or 4 digits) LEAD (Pb)-FREE (0 or digits) PACKAGING VTF xxx or xxxx Example: S = Lead (Pb)-free (e) None = Tin lead UF = Tubed Historical Part Number example: VTF 2 (for reference purposes only) VTF 2 MODEL PART NUMBER Revision: 4-Mar-6 8 Document Number: 60038

9 Land Patterns Land Patterns. Scope This technical note provides sample land patterns for SMT resistive products. The following drawings are based on IPC-SM-782 Surface Mount Design and Land Pattern Standard. These drawings are for reference only Vishay Thin Film recommends that the user contacts their PC board supplier for actual land patterns required. The pads are intended for lead (Pb)-free and tin / lead solder types. 2. Product Series Thin Film Surface Mount Chip Resistors (FC, L, P, PTN, PLT, PLTT. PLTU, PAT, PATT, PNM, M/D55342 QPL Series) 0402 Land Pattern (.829) (0.60) (0.559) (0.635) 0502 Land Pattern (2.083) (0.686) (0.508) 0.03 (0.787) 0505 Land Pattern (2.08) (.32) 0.02 (0.533) 0.03 (0.787) 0603 Land Pattern (2.337) (0.864) (0.762) 0.03 (0.787) 0705 Land Pattern 0.05 (2.667) (.092) 0.03 (0.787) (.32) 005 Land Pattern 0.30 (3.302) 00 Land Pattern 0.3 (3.327) 206 Land Pattern 0.56 (3.962) 505 Land Pattern 0.90 (4.826) (.676) (0.83) (.32) (.65) (0.838) 0.0 (2.565) (2.34) (0.94) (.702) 0.6 (2.946) (0.940) (.372) 200 Land Pattern (6.40) 2208 Land Pattern (6.985) 252 Land Pattern (7.620) 0.00 (2.540) (.930) 0.25 (3.75) (.245) 0.54 (3.92) (.270) 0.75 (4.445) (.245) (5.3) Revision: 2-Dec-6 Document Number: 609

10 Land Patterns Thin Film Surface Mount Chip Resistors (PHP, PCAN Series) 0603 Land Pattern Land Pattern Land Pattern Land Pattern Thin Film Surface Mount Chip Resistors Long Axis Termination (L Series) 0508 Land Pattern Land Pattern 0.09 (2.3) 020 Land Pattern 0.3 (3.327) 225 Land Pattern 0.54 (3.92) (2.286) 0.06 (0.406) (0.762) 0.46 (3.708) 0.20 (5.334) (6.909) 0.03 (0.787) (0.762 ) 0.07 (.803) (0.762) (2.34) (0.889) Revision: 2-Dec-6 2 Document Number: 609

11 Land Patterns Surface Mount Networks (MPM, MP3, MP4 Series) SOT-23 (MPM, MPMA) (.06) SC70-3 (MP3) SC70-4 (MP4) (.499) (.499) (0.635) (0.635) (2.97) (.06) (.06) (.397) (.943) (.43) (0.749) (.943) (.334) (0.965) (.43) Surface Mount Networks SOIC Narrow Body 50 mils (ORN, CSO, MOMC, HTRN, AORN, MORN Series) SOIC-8 (ORN, HTRN, AORN, CSO-8) (0.60) SOIC-4 (NOMC-4, NOMCA-4, CSO-4) (0.60) (2.59) (2.59) (5.207) (5.207) (.270) (.270) SOIC-6 (NOMC-6, NOMCA-6, CSO-6, VSOR-6) (0.60) MORN MSOP MO-87AA (MORN-8) (2.59) (5.207) (.270) Revision: 2-Dec-6 3 Document Number: 609

12 Land Patterns Surface Mount Networks SOIC Medium Body 220 mils (TOMC Series) SOIC-6 (TOMC) (0.60) (2.032) (6.985) (.270) Surface Mount Networks SOIC Wide Body 300 mils (WOMC Series) SOIC-6 (WOMC-6) (0.60) SOIC-20 (WOMC-20) (0.60) (2.59) (2.59) (9.44) (9.44) (.270) (.270) Revision: 2-Dec-6 4 Document Number: 609

13 Land Patterns Surface Mount Networks High Density SSOP, TSOP (VSSR, VTSR Series) SSOP MO-37 VSSR (0.406) OSOP-6, OSOP-20, OSOP-24, VSSR-20 VSSR-24, HD-CSO (0.406) 0.06 (0.406) (.778) (.778) (.778) (5.690) (5.690) (5.690) (0.635) (0.635) (0.635) TSSOP MO-53 VTSR-6 VTSR-20 VTSR (0.356) 0.04 (0.356) 0.04 (0.356) (.778) (.778) (.778) (6.096) (6.096) (6.096) (0.650) (0.650) (0.650) Revision: 2-Dec-6 5 Document Number: 609

14 Land Patterns Surface Mount Leadless Networks (LCC Series) 6 Pin LCC 20 Pin LCC Surface Mount Leadless Networks (MPH Series) 4 Pin LCC Surface Mount Leadless Packages DUAL/ QUAD Flat No Lead (DFN, QFN Series) DFN MLP QFN MLP DFN-8 4 x 5 mm Sq QFN-20 5 x 5 mm Sq (3.500) 0.04 (0.356) (0.696) 0.04 (0.356) (0.696) (3.896) (2.700) (4.595) 0.24 (3.50) (0.800 ) (0.065) Revision: 2-Dec-6 6 Document Number: 609

15 Land Patterns Surface Mount Leadless Resistor Arrays (PR Series) P00 (2 to 8 resistors) P35 (2 to 8 resistors) P82 (2 to 8 resistors) Note All dimensions in inches (mm) Flatpack 4 Pin Bottom Brazed Flatpack 6 Pin Bottom Brazed Flatpack Revision: 2-Dec-6 7 Document Number: 609

16 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9000