L-Series Sealed Rocker Switches

Transcription

1 L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative switch offer total design flexibility, it has set new standards for both performance and reliability. It s I certified, and able to withstand temperatures from -0 C to + C. Features include countless switch and lamp circuit combinations, LED illuminated lenses or laser etched rockers, as well as hundreds of legend choices and several accessories. Eliminates need for retooling Neatly proportioned, our L- Series fits into industry standard mounting holes of. x. and.0mm x.0mm. Integrates easily into your system You can choose from a variety of termination options, including.0 TAB QC &. TAB QC. Withstands extreme temperatures Roller pin mechanism eliminates need for lubricants, so it can withstand from - 0 C to + C. Ensures greater shock protection Welded lamp connection and one-piece internal, jumperless terminal withstand extreme shock and vibration. Maximizes your design flexibility Twelve terminals offer you an extensive range of switch and lamp circuit options, including LED or incandescent illumination. 0

2 L-Series Sealed Rocker Switches Electrical Contact VDC (MAX) resistive amps, VAC 0 amps, 0 VAC 0 amps, - VDC amps, - VDC Dielectric Strength Volts RMS between pole to pole 0 Volts RMS between live parts and accessible surfaces Insulation Resistance... 0 Megohms Initial Contact Resistance. 0 milliohms VDC Life ,000 cycles maintained, 0,000 cycles momentary at rated voltage and current Contacts /0 silver-nickel, silver tin-oxide, gold Terminals Brass or copper/silver plate / (.mm) & / (.mm) Quick Connect terminations standard. Mechanical Endurance ,000 cycles minimum hysical Lighted Seals Base Incandescent - rated 0,000 hours LED - rated 00,000 hours / life (LED is internally ballasted for voltages to VDC) Rocker, base & bracket are sealed. olyester blend rated to C with a flammability rating of 9VO. Actuator Nylon Reinforced, rated to 0 C (modular lens). Locking rocker, standard rocker & paddle. Laser etching with a polycarbonate actuator. Lens olycarbonate rated at 00 C. Front snap-in. Connector Nylon rated at C. olarized. Actuator Travel (Angular Displacement) position positions from center Environmental Environmental I, representing an index of protection as applied to electrical equipment in accordance with IEC 9, BS 90, DIN 00 0 & NFC Corrosion Resistance... MFG Class III per ASTM B- & B-, Method H, with years exposure. Operating Temperature C to + C Vibration er Mil-Std 0F, Method 0D Test Condition A 0.0 DA or 0G s 0-00 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance. Vibration Resonance search -0 Hz 0.0 DA ±0 G s peak Results Horizontal Axis - G s max. Random Hz 0.0 SD-Gsq/Hz 0 Hz Hz Hz Hz 0.0 No loss of circuit during test; <0µ chatter. Shock er Mil-Std 0F, Method B, Test Condition 0G s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre, and post test contact resistance. Salt Spray er Mil-Std 0F, Method 0D, Test Condition A, Hrs. Thermal Shock er Mil-Std 0F, Method 0F, Test Condition A, - C to C. Test criteria - pre and post test contact resistance. Moisture Resistance.... er Mil-Std 0F, Method 0F, Test Criteria - pre and post test contact resistance. Mounting Specifications. [.0]. [.0] TEST CUT HOLE IN ACTUAL MATERIAL MOUNTING HOLE anel Thickness Range Acceptable anel Thickness.00 to. (.mm to.9mm) Recommended:.00,.0,.09,. and.

3 L Series Carling Circuit L-Series Sealed Rocker Switches E C H N - A A - Rating Termination Illumination Lamp Lamp Bracket 9 Actuator 0 Lens Style & Color Lens Style & Color Legend Legend Orientation Actuator Lens Legend SERIES L CIRCUIT Terminal Orientation osition: S D &, & Connected Terminals &, & ON NONE OFF (ON) NONE OFF ON NONE (OFF) ON NONE ON ON NONE (ON) ON OFF ON ON OFF (ON) (ON) OFF (ON) CIRCUITS WITH JUMER TERMINALS 0 (,&),(,&) OFF, OFF (,&),(,&),&,&,& ROGRESSIVE CIRCUITS & & & & & OFF (&) & & (&) & OFF (&) & (&) (&) & (OFF) & & (OFF) & & & &,& &,& &,& &,& &,& OFF, OFF (&),(&) &,& &,& (&),(&) &,& OFF,OFF (&),(&) &,& (&),(&) (&),(&) &,& (OFF),(OFF) &,& &,& (OFF),(OFF) &,& &,OFF OFF,OFF 9 &,,& &,OFF OFF,OFF 0 (&),(&) &,& (&),(&) (&),(&) &,& &,& &,& &,& &,& (&),(&) &,OFF OFF,OFF 0 &,& &,OFF OFF,& HAZARD WARNING CIRCUITS A,&, & NONE OFF,& A,&, & NONE OFF,& VDC Resistive 0A 0VAC / H, A VAC / H, No Listings B A V C 0A V ( ) - momentary S - single pole - uses terminals, &. D - double pole uses terminals, &. Terminals 9, 0, & for lamp circuit only. D 0A V E A V G 0A V H 0A V TERMINATION,,.0 (.mm) TAB (QC). (.mm) TAB (QC) ILLUMINATION Lamp #:above terminals 9 & 0 end of switch.; Lamp # above terminals & end of switch. ositive (+) and negative (-) symbols apply to LED lamps only. Lamps Illumination Type Lamp wired to Terminals S None A # Independent B # Independent + - C # Independent &# Independent + 9- D # Dependent + 9- E # Independent &# Dependent + 9- F # Independent &# Dependent + 9- G # Dependent + 9- &# Independent H # Both Independent &# (in series) # Hazard # Hazard , LAM (same coding for both selections) Selection : above terminals 0 & 9; Selection : above terminals & No lamp 0 Incandescent V V V V V LED * Red Amber Green VDC A L F VDC B M G VDC C N H VDC D J * Consult factory for daylight bright, blue/green and white LED options. Typical current draw for LED is 0ma. BRACKET COLOR Black White Gray Red Standard Bracket Rockerguard at Lamp A B C D Rockerguard at Lamp E F G H 9 ACTUATOR STYLE AND COLOR Black White Gray Red Laser Etched Rocker A B C D addle J N K M 0 & LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 0 - No Actuator Z - No Lens Clear White Amber Green Red Blue - B G M T Large Transparent - C H N U Large Translucent - D J V Bar Transparent - 9 E K R W Bar Transparent A Laser Etch background color LASER ETCH, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog. LEGEND ORIENTATION 0 No legend (used with codes - in selection ) Orientation - vertical, lamp on top Orientation - horizontal, lamp on right Orientation - vertical, lamp on bottom Orientation - vertical, lamp on left AA- NOTES: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. Circuits 0,,, 9 when used in combination with termination codes and are not available with rating codes, C, D, G or H. Termination only available with rating codes, B, and E. Termination not available with rating code. Not available with circuits -, - and 9. AA- ACTUATOR LENS LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog.

4 L Series Circuit L-Series Sealed Locking Rocker Switches D S W C J - M H 00 Rating Termination Illumination Lock Lamp Bracket 9 Actuator 0 Lens Lock Legend Legend Orientation SERIES L CIRCUIT Terminal Orientation ( ) - momentary S - single pole - uses terminals, &. D - double pole uses terminals, &. Terminals 9, 0, & for lamp circuit only. LAM Above terminals & No lamp 0 Incandescent V V V V V LED * Red Amber Green VDC A L F VDC B M G VDC C N H VDC D J * Consult factory for daylight bright, blue/green and white LED options. Typical current draw for LED is 0ma. osition: (lock location) S D &, & Connected Terminals &, & ON NONE OFF ON NONE ON ON OFF ON ON OFF (ON) (ON) OFF (ON) CIRCUITS WITH JUMER TERMINALS 0 (,&),(,&) OFF, OFF (,&),(,&),&,&,& ROGRESSIVE CIRCUITS & & & & & OFF (&) & & (&) & OFF (&) & (&) (&) & (OFF) & & (OFF) & & & &,& &,& &,& &,& &,& OFF, OFF (&),(&) &,& &,& (&),(&) &,& OFF,OFF (&),(&) &,& (&),(&) (&),(&) &,& (OFF),(OFF) &,& &,& (OFF),(OFF) &,& &,OFF OFF,OFF 9 &,,& &,OFF OFF,OFF 0 (&),(&) &,& (&),(&) (&),(&) &,& &,& &,& &,& &,& (&),(&) &,OFF OFF,OFF 0 &,& &,OFF OFF,& VDC Resistive 0A 0VAC / H, A VAC / H, No Listings B A V C 0A V D 0A V E A V G 0A V H 0A V TERMINATION,.0 (.mm) TAB (QC). (.mm) TAB (QC) ILLUMINATION Lamp located above terminals &, position end of switch. ositive (+) and negative (-) symbols apply to LED lamps only. Lamps Illumination Type Lamp wired to Terminals S None B # Independent + - BRACKET COLOR Black J 9 ACTUATOR STYLE AND COLOR Black Red Locking Rocker R 0 LENS STYLE AND COLOR Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 0 - No Actuator Z - No Lens Clear White Amber Green Red Blue - B G M T Large Transparent - C H N U Large Translucent - D J V Bar Transparent - 9 E K R W Bar Transparent FUNCTION AND COLOR Locking osition Up Down Up & Down Center Lock Color A H R Match Actuator B J S black C K T white D L V red E M W safety orange LASER ETCH, LENS OR BODY LEGEND 00 No legend this location / no actuator For legend options & codes, see page 9 of this catalog. LEGEND ORIENTATION 0 No legend (used with codes - in selection ) Orientation - vertical, lamp on bottom Orientation - horizontal, lamp on left Orientation - vertical, lamp on top Orientation - vertical, lamp on right ZAY- ZAY- ORIENTATION ORIENTATION OF ACTUATOR/LENS IN ANEL ORIENTATION ORIENTATION W Lock above terminals 0 & 9. NOTES: Consult factory to verify horsepower rating for your particular circuit choice. Custom colors are available. Consult factory. Additional lamp circuits available. Consult factory. Available only with position circuits. Termination not available with rating. Termination only available with ratings, B and E. Circuits 0,, and 9, when used in combination with termination codes is not available with rating codes, C, D, G or H. Up, Up & Down, and Center lock options will be available Q00.

5 Dimensional Specifications SHOWN WITH LASER ETCHED ACTUATOR L-Series Dimensional Specifications & Accessories SHOWN WITH ROCKER GUARD.90 [0.0].00 [.9].00 [0.]. [0.].0 [.]. [.] SHOWN WITH LARGE LENS AND ADDLE ACTUATOR.90 [0.0] SHOWN WITH BAR LENS, AND CONNECTOR.00 [.9].00 [0.]. [.] 0.0 [0.] 0 Connector Hole lug CONNECTOR LC-0 BLACK.0 TAB CONNECTOR LC-0 BLACK. TAB CONNECTOR.90 [0.0] HOLE LUG LH REMOVABLE HOLE LUG WITH NON-SERRATED WINGS LH HOLE LUG WITH SERRATED WINGS.00 [.9].00 [.0].90 [.]. [.].00 [.].0 [.].90 [0.0]. [.]

6 L-Series Accessories Mounting anel Dimensional Specifications: in. [mm] [.00] [.] R.09 MAX TY R.09 MAX TY MOUNTING ANEL TEST CUT HOLE IN ACTUAL MATERIAL [.] TEST CUT HOLE IN ACTUAL MATERIAL [.] FOR ADDITIONAL UNITS, ADD.0 [.] ER UNIT. FOR MORE THAN L-SERIES SWITCHES, ADD MIDDLE SECTION. AVAILABLE IN ANEL THICKNESSES LISTED BELOW. CONSULT FACTORY DIMENSIONS: LME.0 [.mm] LUS NUMBER OF CENTER BEZELS (LMM) X.0 [.mm] LMS MOUNTING ANEL HOLE MOUNTING ANEL OENING () UNITS MOUNTING ANEL THICKNESS.0 [.].09 [.]. [.]. [.9].00 [.].00 [.].990 [0.].00 [.]. [0.].00 [.].0 [.0] LME MOUNTING ANEL END LMM MOUNTING ANEL MIDDLE LMS MOUNTING ANEL.00 [.].00 [.].00 [.].0 [.0].00 [.].00 [.].00 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X.0 [.mm X.mm].0 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X.09 [.mm X 0.9mm].0 [.0].00 [.].00 [.].90 [.] LM MOUNTING ANEL ANEL OENING SIZE:.90 X. [.mm X.mm]

7 L-Series Switch Circuit Diagrams CIRCUIT CIRCUIT CIRCUIT 0

8 L-Series Switch Circuit Diagrams CIRCUIT CIRCUIT 0 A INTERNAL CONNECTION A INTERNAL CONNECTION 9 0

9 L-Series Switch Lamp Circuit Diagrams ILLUM. A B + C D LEGEND + SYMBOL DEFINITION TERMINAL LOCATION E LAM LOCATION LAM LOCATION MAINTAINED CIRCUIT MOMENTARY CIRCUIT OSITION CONNECTION F + 0 OSITION + G OSITION + 0 H INTERNAL CONNECTION INTERNAL CONNECTION + 0

10 Standard Sealed Rocker Switch Markings SYMBOL LEGEND NAME (SYMBOL MEANING) LEGEND LEGEND LEGEND LENS LENS BODY SYMBOL NAME BODY NEGATIVE OSITIVE (SYMBOL MEANING) NEGATIVE OSITIVE RUNNING LIGHTS (UNDER OWER) AA NA MA ANCHOR LIGHT LIGHT AB NB MB ANCHOR 9 0 MASTER LIGHT SWITCH AC NC MC WATER FLUSHING TA FOR OUTBOARDS HORN AD ND MD HIGH BEAM ROULSION SYSTEM TRIM TRIMMING OERATION AE NE ME LOW / DIED BEAM VENTILATION FAN OR BLOWER AF NF MF SIDE MARKER LIGHT DG 9 DF WINDSHIELD WASHER AG NG MG INTERIOR LIGHT 0 WINDSHIELD WIER AH NH MH WORK LIGHT BILGE UM AJ NJ MJ WORK LAM BILGE BLOWER AK NK MK LOADING FLOOR LAM CW 9 CY OTABLE WATER RESSURE AL NL ML ON -WIER- INT DELAY 0 ENGINE START AM ED MM ROTARY BEACON ENGINE STO AN EE MN LAM TEST DK DL DRIVE TILT TILT OERATION 0 WINDSHIELD WIER/WASHER EMERGENCY START HAZARD WARNING 9 0 U/DOWN LIFT WARM AIR BLOWER TRIM TAB TRIMMING OERATION R HORN REAR AX Y NOTE Negative lens not available on L or LD-Series. Additional Standard Markings available. Consult factory. 9