POF Industrial Fiber Optical Patchcord
|
|
- Annice Jones
- 7 years ago
- Views:
Transcription
1 POF Industrial Fiber Optical Patchcord Introduction Hwaying perfected Plastic Optical Fiber (POF) terminations to the following connectors: Toslink, Miniplug, FC, SC, ST and SMA. Our technicians also have extensive experience terminating POF connectors and couplers from Avago. There is a variety of plastic optic fiber to choose from for your patch cord or pigtail, including fiber for high temperature and for industrial, high vibration/flex environments. Please speak to one of our technicians for more technical data if you require any assistance selecting the right fiber for your kind application. Light-weight, and with a higher tolerance for scratches than glass fiber (GOF), Plastic Optical Fiber (POF) works well over short distances (recommended up to 100m, although POF for longer runs and transmission rates of up to 3Gb/sec are being developed) across a number of platforms from consumer electronics, FTTx and video to industrial applications and sensors. POF fibers used to have a high numerical aperture ranging from 0.3 to 0.5, but it is now possible to get numerical apertures of just under 0.2. We offer below as off-the-shelf items. Feature 1. Easy install and repair 2. Can operate under high/low temperature (-10~70 ) 3. Energy-Saving and environmental-friendly 4. Available in fully dielectric version 5. Immunity from electromagnetic interferences 6. Also available in fully dielectric version 7. Manufacturer: Hwaying Fiber Optics 8. RoHS Certification: Yes Item List Series Item Dia. (mm) Description POF termination HY-FC 1.0/2.2mm plastic fiber cable Silver POF termination HY-SC 1.0/2.2mm plastic fiber cable Blue or other colors POF termination HY-SMA 1.0/2.2mm plastic fiber cable Silver POF termination HY-ST 1.0/2.2mm plastic fiber cable Silver POF termination HY-LC 1.0/2.2mm plastic fiber cable Blue At Hwaying we pride ourselves on accurate, optimized terminations and fast delivery times and we hold a number of both connectors and fiber in stock
2 FC Fiber Optical Patchcord, POF 1 mm Metal retention nut, stainless steel ferrule, standard-length strain relief, 1.0/2.2 mm POF cable. Hwaying can terminate plastic optical fiber with the FC series of connectors to your specifications. The terminations are available from simplex or duplex to more complicated fiber optic looms and breakout cables or terminated to devices. 1. FC connector with nickel coated brass and screw fit for easy adaptor insertion and release; mm Zirconia (Zr.) high tolerance ferrule (SFZ-3A-S5); At Hwaying we pride ourselves on accurate, optimized terminations and fast delivery times and we hold a number of both connectors and fiber in stock. Stainless Brass Brass Crimp 2.5 mm hex Termination/ Number Optical Approximate Polishing of Fibers Fiber Size Diameter Weight Polish 1 1mm 2.2mm 7g Cable Diameter, mm *
3 SC-RJ POF Patch Cords, POF 1 mm 1.0 mm Low NA plastic optical core, polyethylene 2.2 x 4.4 mm jacket Hwaying manufactures a full line of premium quality fiber optic patch cords with SC-RJ terminations. This particular patch cord has a low numerical aperture 1.0 mm diameter core/cladding plastic optical fiber surrounded with a black polyethylene jacket. Its overall diameter is 2.2 or 4.4 mm. Patch cords are available in multiple standard lengths and shipped from stock or rapidly fabricated from stocked inventory to meet short delivery schedules. They are suitable for all general purpose applications. 1. Telecom fiber cable for industrial temperature ranges 2. Low numerical aperture for maximum transmission distance at high bandwidth 3. 1 µm polish terminations ensure high optical coupling efficiency 4. Strain reliefs to minimize fiber stress at terminations 5. Any indoor application requiring SC terminations and plastic optical fiber cable. 6. RoHS Certification: No Termination/ Polishing Number of Fibers Optical Fiber Size Diameter Approximate Weight Stainless Polymer Polymer Yes Polish 1 1mm 2.2mm 5g Cable Diameter, mm
4 SMA-SMA Standard POF Patch Cords, POF 1 mm SMA 905 connectors, 1.0 mm core, UL-rated PE 2.2 mm jacket, RoHS compliant. Standard SMA 905 cable is used with industry-standard 1.0 mm core plastic optical fiber (POF) with a 2.2 mm outside-diameter jacket (PE or PVC). HWAYING manufactures multiple product lines of premium quality fiber optic patch cords suitable for networking and other industrial networking applications. This patch cord series utilizes plastic optical fiber and is recommended for short distance applications such as those inside cabinets or where they will not be subject to physical abuse or exposure to chemicals 1. UL-rated fiber cable 2. Strain reliefs to minimize fiber stress at terminations 3. 1 µm polish terminations ensure high optical coupling efficiency 4. Epoxied and crimped connector terminations for maximum retention strength 5. Assembly processes exceed industry-standard procedures 6. RoHS Certification: Yes Application: Any indoor application requiring SMA terminations and plastic optical fiber cable. Crimp Termination/ Polishing Optical Fiber Size Diameter Approximat e Weight 303 Stainless 303 Stainless 303 Stainless 2.5mm hex Optional Polish 1mm 2.2mm 9.07g Cable Diameter, mm *
5 Application 1. Data link between sensor, 2. Data transmission for RF testing equipment 3. Digital home network, Factory automation ST/ST General Purpose POF Patch Cords, POF 1 mm 1.0 mm plastic optical core, polyethylene Hwaying manufactures multiple product lines of premium quality fiber optic patchcords suitable for industrial networking applications utilizing plastic optical fiber. This particular cable is made with industry-standard diameter 1.0 mm plastic optical fiber core/cladding surrounded by a black polyethylene 2.2 mm jacket. Patchcords are available in multiple standard lengths and shipped from stock or quickly fabricated from stocked inventory to meet short delivery schedules
6 Feature 1. Telecom fiber cable for industrial temperature ranges 2. Strain reliefs to minimize fiber stress at terminations 3. Epoxied connector terminations for maximum retention strength 4. 1 µm polish terminations ensure high optical coupling efficiency 5. Assembly processes exceed industry-standard procedures 6. Data link between sensor and transmission for RF testing equipment 7. Digital home network and Factory automation 8. RoHS Certification: Yes Crimp Termination/ Polishing Optical Fiber Size Diameter Approximate Weight Stainles s Stainles s Cast Zinc 2.5mm hex Optional Polish 1mm 2.2mm 5g Cable Diameter, mm
7 LC POF Fiber Optical Patchcord, POF 1 mm Standard-size push/pull design with stainless steel ferrule and strain relief, 1.0/2.2 mm POF cable. Industry-standard SC connector is used for 1 mm core plastic optical fiber with a 2.2 mm jacket. is stainless alloy ferrule. Manufacturer: HWAYING RoHS Certification: No Application: Any indoor application requiring SC terminations and plastic optical fiber cable. Stainless Polyme r Termination/ Number Optical Polishing of Fibers Fiber Size Diameter Approximate Weight Polymer Yes Polish 1 1mm 2.2mm 5g Cable Diameter, mm *
8 SMI General Purpose POF Patch Cords, POF 1.0 mm 1.0 mm low NA plastic optical core, polyethylene 2.2 x 4.4 mm jacket The Small Multimedia Interface (SMI) cable assembles Non Flammable are used for low cost, high speed data transmission for applications such as avionic, marine and industrial. Hwaying manufactures a full line of premium quality fiber optic patch cords with SMI terminations. This particular patch cord has a low numerical aperture 1.0 mm diameter core/cladding plastic optical fiber surrounded by a black polyethylene jacket. Overall cladding size is 2.2 x 4.4mm. Patch cords are available in multiple standard lengths and shipped from stock or rapidly fabricated from stocked inventory to meet short delivery schedules. They are suitable for all general purpose applications. Feature 1. Telecom fiber cable for industrial temperature ranges 2. Low numerical aperture for maximum transmission distance at high bandwidth 3. 1 µm polish terminations ensure high optical coupling efficiency 4. Epoxied connector terminations for maximum retention strength 5. Strain reliefs to minimize fiber stress at terminations 6. Assembly processes exceed industry-standard procedures 7. RoHS Certification: No Application: Any indoor application requiring SC terminations and plastic optical fiber cable
9 Connector Crimp Termination/ Polishing Optical Fiber Size Diameter Approximate Weight Polymer Polyme r N/A Lockin g Clip Yes Polish 1mm 2.2mm 2g Cable Diameter, mm
SINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS
Features: SINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS Low insertion loss < 0.2 db Excellent repeatability FC/PC, SC, ST, LC, MU, E2000 termination available Custom ferrule termination available Designed
More informationFiber Optic Cable Assemblies. Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable
Fiber Optic Cable Assemblies Pigtails, Jumpers (simplex and duplex), Fanouts, Pre-connectorized Multi-Fiber Cable 1 Cable assemblies used in patch panels (Fiber Distribution Units) are an essential interface
More informationPatch Cords for Data Center Applications
Applications General use of patch cords includes the interconnection of the optical fiber cable plant with opto-electronic equipment, and/or the cross-connection between cable plant segments. Pigtails
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationCable Assembly Solutions at the Speed of Light
Cable Assembly Solutions at the Speed of Light Peggy Kovling ACI Founder Peggy Kovling credits her extensive knowledge of the cable business, along with her abilities in customer relationship management,
More informationPolymer Coated Fiber Cable (PCF)
Polymer Coated Fiber Cable (PCF) Panduit has introduced a Polymer Coated Fiber (PCF) to their fiber cable offering available in 50µm and 62.5µm core diameters. Along with this cable having a stronger durability
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationReliable, Consistent, Quality
Reliable, Consistent, Quality 1-877-320-3143 www.fibertronics.com Reliable, Consistent, Quality Welcome To Fibertronics Inc. Reliability, consistency, and quality is what we put behind every Fiber optic
More informationHIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015
HIROSE ELECTRIC U.S.A. Fiber Optic VAR July, 2015 Fiber Optic VAR Program Hirose Launches Fiber Optic Cabling VAR Program to provide a complete fiber optic cable assembly and wire harness solutions to
More informationField Installable Optical Connector for Cables
Field Installable Optical Connector for Cables Daigo Saito 1, Kazuhiro Takizawa 1, Kazuya Ogata 1, and Tan Khee Yen Serin 2 With the rapid expansion of fiber to the home (FTTH) in Japan, mechanical splices
More informationHIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS
NEW HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS Features: New! Reduced size and cost versions Reliable high power handling: As much as 80 Watts High Isolation, up to 50dB isolation possible from
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationETD Fiber Optic Products
ETD Fiber Optic Products ETD manufactures and supplies a wide range of passive fiber optic components and solutions for the European Data, Telecom and FTTX environment. ETD has worked in the Fiber Optic
More informationHarsh Environment Connector Material Selection Guide
Harsh Environment Connector Material Selection Guide Introduction To ensure robust and reliable system performance, harsh environment fiber optic (HEFO) connectors must meet certain requirements. To meet
More informationULTIMATE SNAP-N-SEAL
ULTIMATE SNAP-N-SEAL F Series Compression Connectors Thomas & Betts introduces the Ultimate Snap-N-Seal Compression Connector, the newest addition to the Snap-N-Seal system. Look for the classic design
More informationUSB 3.0 Cables. Color. Black Black Black Black Black 3021003-03 3021009-06 3021015-10 3021021-16 3021027-16. Black Black Black Black Black
USB.0 CableS USB.0 and backwards compatible for USB.0 and. Supports high speed, 480Mbps Twisted-pair construction reduces cross talk to ensure error free transfer USB A male to USB B male 00-0 007-0 0-09-
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationFIBER OPTIC AND ACCESSORIES
FIBER OPTIC AND ACCESSORIES Introduction to Fiber Optic Optical Cables Fiber Optics are made of thin threads of silicon in the form of silicon dioxide (SiO ), which guide the light. These can be considered
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationThe color scheme for the fibers in the cable complies with the Telcordia (formerly Bellcore) specification.
10 Cables The cables referred to below are provided with standard single- and multimode fibers. Other commercially available fibers can be provided on request. The bare fibers are colored in all cases
More information7.4 3M No Polish Connector
Cap Fibre Splice Element Description 3M No Polish Connector (NPC) enables fast, on-site installation of 250μm and 900μm connections utilizing a one piece, pre-assembled design. The SC compatible connector
More informationDIRECTIONAL FIBER OPTIC POWER MONITORS (TAPS/PHOTODIODES)
Features: DIRECTIONAL FIBER OPTIC POWER MONITORS (TAPS/PHOTODIODES) PATENT NUMBERS: CANADA 2,494,133, USA 7095931, 7295731 AND CHINA 1672073 Telcordia GR-468 qualified Available in versions for any wavelength
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More informationBLINK Triple-Play Connector
An innovative optical connector tailored to residential requirements forms the basis of the HUBER+SUHNER Fiber In The Home portfolio. Increased protection against soiling of the connector end surfaces,
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More informationHIGH POWER FIBER OPTIC PATCHCORDS
HIGH POWER FIBER OPTIC PATCHCORDS USA PATENT #: 7431513 Features: Unique connector design minimizes thermal damage Patented connector designs for precise fiber to fiber coupling Able to withstand temperatures
More informationCHARACTERISTICS AND ADVANTAGES OF OPTICAL FIBER CABLES
AND ADVANTAGES OF OPTICAL FIBER CABLES ADVANTAGES Low attenuation. Long repeater spacings or repeaterless networks. Wide bandwidth. Large transmission capacity with simultaneous voice, data and video transmission
More informationCable Assemblies. Corning Cable Systems
Corning Cable Systems OptiFit Node Assembly Photo CAPSS1721 Description As the industry s leading supplier of single-mode cable assemblies, Corning Cable Systems offers the most complete line of connectors
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationSecurity & Surveillance Cabling Systems
Security & Surveillance Cabling Systems Security and Surveillance Cabling Systems The video security industry is growing and ever-changing, offering a wealth of opportunity for today s security professionals.
More informationHP Multimode OM3 LC/LC Optical Cables Overview. Models HP 50 m Multimode OM3 LC/LC Optical Cable
Overview Models HP 0.5 m Multimode OM3 LC/LC Optical Cable HP 1 m Multimode OM3 LC/LC Optical Cable HP 2 m Multimode OM3 LC/LC Optical Cable HP 5 m Multimode OM3 LC/LC Optical Cable HP 15 m Multimode OM3
More informationPlug - Type (Male/Female) Attenuators CAA series Singlemode
Plug - Type (Male/Female) Attenuators CAA series Singlemode Description: The plug-type singlemode attenuators are used directly on the ends of fiber optic jumpers prior to installation in adapters. These
More informationField-Installable Fusion Splice-on Connector
Economical Solution for Integrated Fiber Preparation Tool Demand. Field-Installable Fusion Splice-on Connector More Cost-effective than Mechanical Connector in All Aspects PCT/KR2010/65973 The solution
More informationBest Practices for Ensuring Fiber Optic System Performance. David Zambrano
Best Practices for Ensuring Fiber Optic System Performance David Zambrano Inspect Before You Connect Optical Connectors in our Networks Contamination and Signal Performance Sources of Contamination Process
More informationSecure/Keyed LC System Solutions Overview
Secure/Keyed LC System Solutions Overview Designing performance and efficiency into your secure network Introduction In recent years, physically discrete fiber connection systems have emerged to respond
More informationFiber Optic Terminus End Face Quality Standards
Introduction Fiber Optic Terminus End Face Quality Standards Good fiber optic performance relies on connectors that are manufactured properly. Specifically, optimal optical performance requires that the
More informationReasons for reissue are in Section 6, REVISION SUMMARY.
Figure 1 This instruction sheet covers the application of OPTIMATE FSMA Fiber Optic Connector Types 905 and 906 for data and telecommunications applications. Base part numbers which apply to each type
More informationThe following terms are defined within the context of the fiber optic industry
The following terms are defined within the context of the fiber optic industry Adapter A mechanical media termination device designed to align and join fiber optic connectors. Often referred to as coupling,
More information3M Telecommunications Solutions for Networks. 3M Hot Melt Fibre Optic. Connectors, Kits and Accessories. Innovation
3M Telecommunications Solutions for Networks 3M Hot Melt Fibre Optic Connectors, Kits and Accessories Innovation 3M Hot Melt Connectors are among the most popular with contractors because of their reliability
More informationYour Product. - Our Key Competence. Moulding and Encapsulation Cable Assembly Customizing Fiber Cable Assembly Assembly Projects
Your Product - Our Key Competence Moulding and Encapsulation Cable Assembly Customizing Fiber Cable Assembly Assembly Projects Contents The Best Solution for You................... 3 Cable Assembly.........................
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationSECURE Fiber Optic Products
SECURE Fiber Optic Products LC SECURE Fiber Optic Products (Pages 9 and 10) LC SECURE Connectors, Cable Assemblies and Adapters MPO SECURE Fiber Optic Products (Pages 11 and 12) MPO SECURE Cable Assemblies
More information12 Fibre MTP Jumper, MTP (non-pinned) to MTP (pinned)
1 1 9.41 115 0 Patch cables are used 143 12 Fibre MTP Jumper, MTP (non-pinned) to Patch cables are used for non -permanent connections between patch panels, transmission equipment, etc. Pre -assembled
More informationPERFORMANCE AND VALUE FOR YOUR DAY-TO-DAY TEST APPLICATIONS.
Rosenberger RFlex Cables PERFORMANCE AND VALUE FOR YOUR DAY-TO-DAY TEST APPLICATIONS. Features and Benefits Microwave test cable performance at a fraction of the cost Excellent performance over a broad
More informationFCS-FCT-FCP Housings and Connector Panels. InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2
Product Family: Product: Fibre: LANscape Hardware Solutions FCS-FCT-FCP Housings and Connector Panels InfiniCor SX+ OM3, InfiniCor 600 OM2, InfiniCor 300 OM1, SMF 28e OS1/OS2 Applications Corning Cable
More informationWall Mounted Products
Metallic Indoor PK Termination Boxes Prysmian Part Numbers: see below Metallic PK Termination Boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunication,
More informationhot products guide people. passion. expertise. gocsc.com
hot products guide gocsc.com Hardware & Adapter Panels who is CSC? Founded in 1972, Communications Supply Corporation (CSC), a subsidiary of WESCO International, Inc. (NYSE: WCC) distributes a full range
More informationAPPLICATION NOTE POLARIZATION MEASUREMENTS
OZ OPTICS LTD. APPLICATION NOTE POLARIZATION MEASUREMENTS OZ OPTICS FAMILY OF POLARIZATION MAINTAINING COMPONENTS, SOURCES, AND MEASUREMENT SYSTEMS The information/data furnished in this document shall
More informationTable of Contents. Fiber Trunking 2. Copper Trunking 5. H-Series Enclosures 6. H-Series Mods/Adapter Panels 7. RSD Enclosures 8
Data Center Guide 1 Our Philosophy As a leader in the enterprise cable industry since our inception over three decades ago, we can help you implement the solution that will work best for your cabling infrastructure,
More informationCables and Accessories Selection Guide
Cables and Accessories Selection Guide From data centers to robotics to patient monitoring equipment, we re committed to enabling the next generation of faster, smaller and smarter design. 3M offers an
More informationWhy is Passive Intermodulation Important?
Precision Products for Demanding Applications Low PIM Products for Distributed Antenna Systems and Wireless Infrastructure Low PIM Coaxial Cable Assemblies Plenum Rated, Low PIM, Low Loss Coaxial Cable
More informationCable Assemblies. Features and Benefits
Features and Benefits Flame-retardant jacket Rugged and durable Superior Performance Testing Every termination is tested to ensure the highest in network performance State-Of-The-Art Manufacturing Processes
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More informationPURE : REliable planning of data center cabling
PURE : REliable planning of data center cabling THE PURE EFFEct: TWICE AS MANY CONNEctionS AND 15 METERS MORE CHannEL LEngtH * PreCONNECT PURE is a milestone in the development of high-end IT cabling for
More informationWhat are Fibre Optics?
Fibre Optics Fibre Optics? Fibre optics (optical fibres) are the guiding channels through which light energy propagates. These are long, thin strands of very pure glass about the diameter of a human hair
More informationPatch Cord Quality, Reliability and Performance. The Impact of Industry Specifications and Physical Parameters on Patch Cord Performance
Patch Cord Quality, Reliability and Performance The Impact of Industry Specifications and Physical Parameters on Patch Cord Performance White Paper 12/2003 Executive Summary The quality, reliability, and
More informationBLACK BOX. Secure network ports from unauthorized access and accidental disconnects.
FC black process black LockPORT Security Patch Cables CAT5e, CAT6 and Fibre 5th black Secure network ports from unauthorized access and accidental disconnects. BLACK BOX» LockPORT cables stay locked in
More informationFakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
More informationCable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable
Cable Preparation and Pulling Procedure Best Practices for Fiber Optic Indoor Tight-Buffered Cable Panduit Corp. 2009 BEST PRACTICES PN447B \ Table of Contents 3 2.0 Preparation Notes Tools and Material
More informationAs today s evolving data centers
IT CORNER Next Generation Optical Fiber Connectivity Solutions for the Mission Critical Data Center BY BILL CHARUK As today s evolving data centers confront bandwidth capacity challenges, the migration
More informationhome site map help ECMS Project: 70197 Standard / Federal Oversight Advertised
Page 1 of 6 S PECIAL PROVISION home site map help ECMS BP ADMIN Project: 70197 Standard / Federal Oversight Advertised Short Description: US 422 Schuylkill River Bridge - D/B: Retaining Wall; ITS Devices;
More information7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
More informationGLOBAL COLLEGE OF ENGINEERING &TECHNOLOGY: YSR DIST. Unit VII Fiber Optics Engineering Physics
Introduction Fiber optics deals with the light propagation through thin glass fibers. Fiber optics plays an important role in the field of communication to transmit voice, television and digital data signals
More informationspinner Measurement & Calibration equipment for network analyzers
spinner Measurement & Calibration equipment for network analyzers Edition B 2011 High Frequency Performance Worldwide www.spinner-group.com SPINNER test & calibration equipment for best measurement results
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More informationTimes Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
More informationHow To Make A Fibre Cable For A Data Centre
LANmark-OF Fibre Optic Solutions for Data Centres Complex Data Centres require fibre solutions CORE SWITCH ACCESS SWITCH SERVER SAN SWITCH LANmark-OF Slimflex Patch Cords LANmark-OF Single Mode LANmark-OF
More informationFiber Optic Specifications
Fiber Optic Specifications All Fiber Optic shall be Corning Altos Single Mode OS1 Outdoor Loose Tube Gel Free Cable Corning Fiber Products only will be accepted and no substitutions or alternates will
More informationFOCONEC. Network Connectivity & Cabling Management. Overview: Features: Brighter Future
CORDS & CABLE ASSEMBLIES Standard Simplex/Duplex Patch Cords Overview: FOCONEC supplies full series of standard simplex, duplex patch cords or pigtails, designed for interconnection or cross connection
More informationDIAMOND AVIM Connector
DIAMOND AVIM Connector Fiber optic connector for space applications Dr. François CALOZ, accredited laboratory Frédéric TAUGWALDER, Engineering DIAMOND SA - OCT. 2005 - ATELIER CONNECTIQUE - CNES 1 Motivation
More informationItems Supplied. Frequency. Designation Description / Delivery Unit Order Number
Fiber Optic Cleaver D6 For Single- and Multimode Fibers Diamond blade for highest cleave quality and long life (typically > 10,000 cleaves) Fiber cleave length: 3.5 to 15 mm Fiber diameter: 125 µm nominal
More informationWhy Expanded Beam types are essential in military and other harsh environment applications
White paper Fiber Optic Connectors Bliek 18 4941 SG RAAMSDONKSVEER NEDERLAND Telephone: +31 162 518 208 Fax: +31 162 518 216 E-mail: info@mcap.nl Website: www.mcap.nl ABN-AMRO: 52.14.96.500 IBAN: NL28ABNA0521496500
More informationSimpler all over. Simpler all round. 500 MHz. 10 GB ether. fully shielded. Poe+ Cat.6 A. Data Voice. MFP8 Cat.6 A Field assembly RJ45 plug
Simpler all over. Simpler all round. No special tools required for field ASSEMBLY Cat.6 A 10 GB ether. 500 MHz fully shielded Poe+ Data Voice MFP8 Cat.6 A Field assembly RJ45 plug Less fuss. More flexibility.
More informationAmphenol Fiber Systems International
Amphenol Fiber Systems International TACBeam M83526/20 & /21 Qualified Expanded Beam Rugged Fiber Optic Connectors M83526/20 qualified AFSI TACBeam rugged fiber optic connector About the TACBeam Connector
More informationPretium Connector Housings
Pretium Connector Housings A LANscape Pretium Solutions Product Applications Main cross connect, intermediate cross connects and telecommunications rooms Rack or equipment cabinet installations Data center
More informationOptical Fibers Fiber Optic Cables Indoor/Outdoor
presents Optical Fibers Fiber Optic Cables Indoor/Outdoor Content Optical fiber function, types optical effects applications production of optical fibre Cable - general types Indoor Indoor / outdoor Outdoor
More informationEMC Test Chamber Solutions RF Cable Assemblies and Connectors
EMC Test Chamber Solutions RF Cable Assemblies and Connectors RF CABLE ASSEMBLY AND CONNECTOR SOLUTONS FOR EMC MMUNTY AND EMSSON COMPLANCE TESTNG E X T N T R A T E D E P T H --> POWER LEVEL: -40.00 dbm
More informationProduct Ranges. Standard, Modified or Customized
Product Ranges Standard, Modified or Customized Team-up with Mikkelsen Mikkelsen has a long history of cooperating with only the best manufatores in our field. After a thorough consideration we select
More informationFeatures. Geometrical analysis Optical measuring system First article inspection 3D item analysis Quality control. Brand MIKKELSEN ELECTRONICS 7ISO
Technologies and Processes Testing Facilities 3D Scanning 3D Printing X-ray Interferometer for surface inspection Micro grind Automatic optical inspection system (AOI) High voltage testing Electrical testing
More information15 Pin DSUB - MALE 15 Pin DSUB - FEMALE 9 Pin DSUB - MALE 9 Pin DSUB - FEMALE
Last Revised: 3 Oct 03 Description: This data sheet show our range of high quality appliance cables, such as signal cables (VGA / DVI), Touchscreen and power cables. These are either delivered with our
More informationLOW LOSS CABLE PAG. 1
LOW LOSS CABLE PAG. 1 INTRODUCTION Following many requests we received regarding the need for low-loss custom cable assemblies, we have set up a special production of high performance coaxial cable assemblies
More informationDVI Extender via 4 fiber channel LC Duplex Connector Extends DVI connection up to 500 meters
Description DVI (Digital Visual Interface) recently becomes an popular interface between monitor and PC. Electrical signal limits the transmission length and quality. APAC DVI extender helps DVI to transmit
More informationEXAMPLE OF RELEVANT STANDARDS
Optical Cables Electronics market NEXANS a n d Th e El e c t r o n i c s Ma r k e t Nexans products offer a high technology knowledge and an international know-how, which has been experienced in different
More informationFiber Optic. Passive Components Edition 2009
Fiber Optic Passive Components Edition 2009 Reliably connected to your network Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems for electrical
More informationUniCam High-Performance Connectors, Multimode and Single-Mode
features and benefits Broad operating temperature (-40 to +75 C) Factory-polished end face Fast termination and no consumables Minimum insertion loss Performance guaranteed Utility and flexibility Consistent
More informationLASER TO FIBER COUPLER WITH ADJUSTABLE FOCUS USA PATENT #7431513
LASER TO FIBER COUPLER WITH ADJUSTABLE FOCUS USA PATENT #7431513 Features: Can handle powers up to 100 W CW Patented connector designs for precise coupling with focus adjustment Excellent coupling efficiency
More informationPOLARIZATION MAINTAINING FIBER PATCHCORDS AND CONNECTORS
POLARIZATION MAINTAINING FIBER PATCHCORDS AND CONNECTORS Features: High extinction ratios of 20dB up to 40dB Low insertion losses, typically
More informationDATA CENTRES POWERED BY EXCEL
DATA CENTRES POWERED BY EXCEL MAXIMISE EFFICIENCY BOOST PERFORMANCE INCREASE R.O.I. WITHOUT COMPROMISE Excel is a world-class premium performance end-to-end infrastructure solution. Designed, manufactured,
More informationTermination Procedure. FCUPC One Piece Connector
Termination Procedure (3mm/2.4mm/2mm/1.6mm) Issued By: Engineering Dept. Reviewed By: P.N. Approved By: T.M. SENKO Advanced Components, Inc. 225 Cedar Hill Street, Marlboro, MA 01752, USA Toll-free: +1-888-32-SENKO
More informationRemoving the Mystery from OTDR Measurements. Keith Foord Product Manager Greenlee Communications
Removing the Mystery from OTDR Measurements Keith Foord Product Manager Greenlee Communications Why an OTDR? Terminology Theory Standards Key specifications Trade-offs Cleaning and Inspection Measurements
More informationRJF TV Ethernet connection system for harsh environment
RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
More informationDisplayport Extender via 2 multimode fibers LC Duplex Connector Extends Displayport Link up to 200 meters
Description Displayport combines the audio and video through an interface. It supports high resolution displays and multiple displays with a single cable, and increases the efficiency and bandwidth of
More informationFIBER OPTIC SOLUTIONS
S T A T E O F T H E A R T F I B E R O P T I C S O L U T I O N S FIBER OPTIC SOLUTIONS C O N N E C T I V I T Y F I B E R O P T I C P E R F O R M A N C E WHEN YOUR NETWORK REQUIRES THE PERFORMANCE THAT ONLY
More informationMDU SC Connector Termination Procedure
MDU SC Connector Termination Procedure Series: 718-NANN-NNNNN B Update the stripping length 11/24/09 A Initial Release 4/30/09 Version Revision History Summary Issue Date I INTRODUCTION This document describes
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationNetwork/Multimedia Cables
Network/Multimedia Cables For LAN Installation, Home/Office Use Cat. 5, 6 Ethernet Cables Multi-Mode & Single-Mode Fiber Cables KVM Cables USB 2.0 Cables 1394 (FireWire) Cables F or the benefit of one-stop
More information