ALUMINIUM PROFILE SYSTEM SERIES 40

Transcription

1 ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories.

2

3 TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections Processing of profiles for connectors Prices of aluminium profile processing 2. Aluminium profile prices and delivery units COMPONENTS PAGE Angle connector 2.22 Articulated feet ASK combination foot 2.57 ASK handle system 2. Ball caster 2.42 Base plates 2.5 Bolt anchor 2.61 Bolt connector 2.22 Bracket Bullet catch 2.39 Cable carrier 2.50 Cable ducts 2.52 Carrier rollers 2.42 Casters with screw-on plate Casters with bolt hole 2.62 Centring plate kit 2.24 Clamping lever 2.43 Clamping bracket 2.2 Clamping block 2.46 Closure profiles 2.46 Connecting plate 2.25 Corner bracket 2.2 Cover and closure profiles 2.46 Cover caps for aluminium profiles 2. Cover cap for bracket 2.29 Cover cap for cable duct 2.53 Cover for cable duct 2.52 Cover caps for corner bracket 2.29 Cover cap for handle 2. Cross-cable tie block 2.50 Damping ring for articulated foot 2.56 Door lock 2.3 Door lock, compact 2.3 Door stop 2.39 Fastening bracket for bullet catch 2.39 Fastening bracket for telescopic support

4 TABLE OF CONTENTS SERIES COMPONENTS PAGE Fastening kit for casters 2.64 Fixed casters with screw-on plate Form connector 2.25 Foundation bracket 2.59 Handles 2. Handle, angled 2.41 Heavy duty casters with screw-on plate 2.66 Hinges Joints 2.44 Joint angle 2.2 Lifting caster 2.63 Magnetic latch 2.39 Multi-uniblock Plate for articulated feet 2.54 Rubber cover profile 2.51 Profile connector 2.22 Quick connector, rotation lock 2.23 Quick connector, screw-in 2.22 Rhomboid T-slot nut 2.33 Rollers for roller track 2.43 Roller holder 2.42 Round head screws Screw-in connector 2.25 Screws for cover cap 2.53 Sealing profile 2.47 Sliding strip 2.42 Slot nuts Steel bracket 2.25 Swivel fastening 2.45 System slide 2.51 Threaded rods with ball 2.55 Threaded sleeve 2.55 Universal bullet catch 2.3 Uni butt connector 2.24 Uni clamping kit 2.24 Universal floor support

5 CORPORATE PHILOSOPHY FROM PLANNING TO IMPLEMENTATION: ASK - EVERYTHING FROM ONE SOURCE Automation components for engineering and industrial companies We deal with the implementation of simple and cost effective production facilities with the help of our aluminium profile modular system. From 3D construction to straightforward implementation. For more then ten years we have devoted ourselves to generating the best solutions for the most varied system configurations, in order to be equipped for all eventualities. Our many years of experience enable us to provide the exact solution to meet your requirement. Traditionally grown as well as innovative ideas are taken into consideration and this approach has acquired us high customer satisfaction. The most varied systems in particular our modular system - enable a cost friendly and visually appealing implementation of your projects. We supply technical manufacturing facilities for industrial companies and components for machinery and plant engineering. We would be glad to assist you with detailed advice about a suitable system, 3D construction and project planning, complete procurement of individual components and their assembly and corresponding supply of spare parts. In doing so, we not only commit ourselves to the implementation of complex solutions but also to the supply of individual components. Our multiple and extensive range combined with our straightforward approach will also convince you. Put us to the test! We set the standards for innovation, product and occupational safety, product quality and performance. 2.3

6 SERIES SLOT 5 PROFILE slot 5 Article no.: 10 Ø 4,3 Ix 0,72 cm 4 Wx 0,72 cm³ Iy 0,72 cm 4 Wy 0,72 cm³ 1,0 cm² 0,4 kg/m 6,35 5 PROFILE 2N90 slot 5 Article no.: Ø 4,3 Ix 0,7 cm 4 Wx 0,76 cm³ Iy 0,7 cm 4 Wy 0,76 cm³ 1,91 cm² 0,51 kg/m 6,35 5 Ø 4,3 PROFILE slot 5 Article no.: Ix 0,41 cm 4 Wx 1,41 cm³ Iy 5,14 cm 4 Wy 2,57 cm³ 3,32 cm² 0,9 kg/m 6,35 5 PROFILE slot 5 Article no.: 31 Ix 9,33 cm 4 Wx 4,62 cm³ Iy 9,33 cm 4 Wy 4,62 cm³ 5,14 cm² 1,39 kg/m 6,35 Ø 4,

7 SERIES SLOT 5 Ø 4,3 PROFILE 60 slot 5 Article no.: 33 Ix 2,06 cm 4 Wx 2,06 cm³ Iy 16,09 cm 4 Wy 5,36 cm³ 4,76 cm² 1,2 kg/m 6, Ø 4,3 PROFILE 0 slot 5 Article no.: 34 Ix 2,76 cm 4 Wx 2,76 cm³ Iy 36, cm 4 Wy 9,02 cm³ 6,25 cm² 1,67 kg/m 5 Ø 3,3 PROFILE 10 slot 5 Article no.: 05 Ix 0,12 cm 4 Wx 0,22 cm³ Iy 0,53 cm 4 Wy 0,53 cm³ 10 6, ,50 6, ,29 cm² 0,22 kg/m 2.5

8 SERIES SLOT 6 PROFILE L slot 6 Article no.: Ø 5 Ix 2,90 cm 4 Wx 1,94 cm³ Iy 2,90 cm 4 Wy 1,94 cm³ 3,43 cm² 0,93 kg/m Ø 5 9,75 6 Ø ,75 6 Ø ,75 6 PROFILE slot 6 Article no.: 45 Ix 4,15 cm 4 Wx 2,77 cm³ Iy 4,15 cm 4 Wy 2,77 cm³ 4,67 cm² 1,26 kg/m PROFILE 2N90 slot 6 Article no.: 42 Ø 5 Ix 3,02 cm 4 Wx 1,9 cm³ Iy 3,02 cm 4 Wy 1,9 cm³ 3,54 cm² 0,96 kg/m 9,75 6 PROFILE 60L slot 6 Article no.: 50 Ix 5,54 cm 4 Wx 3,69 cm³ Iy 21,22 cm 4 Wy 7,07 cm³ 6,13 cm² 1,65 kg/m PROFILE 60 slot 6 Article no.: 52 Ix 7,92 cm 4 Wx 5,2 cm³ Iy 29, cm 4 Wy 9,77 cm³,47 cm² 2,29 kg/m 6 2.6

9 SERIES SLOT 6 60 PROFILE 60 60L slot 6 Article no.: 53 Ø 5 Ix 39,9 cm 4 Iy 39,9 cm 4 Wx 12,96 cm³ Wy 12,96 cm³ 10,1 cm² 2,7 kg/m 9,75 Ø 5 PROFILE 1 L slot 6 Article no.: 57 Ix 11,04 cm 4 Wx 7,21 cm³ Iy 154,51 cm 4 Wy 25,44 cm³ 11,65 cm² 3,11 kg/m 60 PROFILE 60 1L slot 6 Article no.: 5 Ix 77,39 cm 4 Wx 25, cm³ Iy 261,7 cm 4 Wy 43,65 cm³ 1,7 cm² 5,05 kg/m Ø 3,3 PROFILE 12L slot 6 Article no.: 15 Ix 0,25 cm 4 Wx 0,39 cm³ Iy 1,46 cm 4 Wy 0,9 cm³ 1,5 cm² 0,43 kg/m 9, ,75 1 9,75 Ø

10 SERIES SLOT PROFILE EL slot Article no.: 71 Article no.: 71LE1#00 Ø 6, Ix 7,3 cm 4 Wx 3,69 cm³ Iy 7,3 cm 4 Wy 3,69 cm³ 5,07 cm² 1,37 kg/m 12,25 PROFILE L slot Article no.: 60 Article no.: 60LE1#00 Ø 6, Ix 9,00 cm 4 Wx 4,50 cm³ Iy 9,00 cm 4 Wy 4,50 cm³ 6,46 cm² 1,74 kg/m 12,25 PROFILE L, BLACK ANODIZED slot Article no.: 60 SW Ø 6, Ix 9,00 cm 4 Wx 4,50 cm³ Iy 9,00 cm 4 Wy 4,50 cm³ 6,46 cm² 1,74 kg/m 12,25 PROFILE slot Article no.: 72 Ø6, Ix 13,96 cm 4 Wx 6,9 cm³ Iy 13,96 cm 4 Wy 6,9 cm³ 9,16 cm² 2,47 kg/m 12,25 2.

11 SERIES SLOT Ø 6, PROFILE L 1N slot Article no.: 65 Ix 9,54 cm 4 Wx 4,66 cm³ Iy 9,01 cm 4 Wy 4,50 cm³ 6,61 cm² 1,7 kg/m 12,25 Ø 6, PROFILE L 2N90 slot Article no.: 70 Ix 9,64 cm 4 Wx 4,70 cm³ Iy 9,64 cm 4 Wy 4,70 cm³ 6,0 cm² 1,4 kg/m 12,25 Ø6, PROFILE L 2N10 slot Article no.: 6 Ix 9,02 cm 4 Wx 4,51 cm³ Iy 10,11 cm 4 Wy 5,05 cm³ 6,77cm² 1,3 kg/m 12,25 Ø 6, PROFILE L 3N slot Article no.: 69 Ix 9,62 cm 4 Wx 4,70 cm³ Iy 10,22 cm 4 Wy 5,11 cm³ 6,96 cm² 1,90 kg/m 12,25 2.9

12 5 9 Gewindestift M6x 29 x 0 PROFILE 0L slot Article no.: 0 Article no.: 0LE1#00 Ø 6, Ix 16,60 cm 4 Wx, cm³ Iy 69,54 cm 4 Wy 17,3 cm³ 11,3 cm² 3,04 kg/m 0 12,25 PROFILE 0L BLACK ANODIZED slot Article no.: 0SW Ø 6, Ix 16,60 cm 4 Wx, cm³ Iy 69,54 cm 4 Wy 17,3 cm³ 11,3 cm² 3,04 kg/m 0 SERIES SLOT CLAMP PROFILE slot Article no.: 63 Ix 9,51 cm 4 Wx 4,76 cm³ Iy 12,27 cm 4 Wy 6,14 cm³ 7,51 cm² 2, kg/m 23 Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren. 12,25 Hohe Festigkeit des Rahmens durch eingespannte Flächenelemente. Lieferung erfolgt mit Klemmleiste und Ø 6, ~105 Gewindestift M6x CLAMP PROFILE - 10 slot Article no.: 64 Ix 11,41 cm 4 Wx 5,71 cm³ Iy 13,0 cm 4 Wy 6,54 cm³,41 cm² 2,56 kg/m 5 9 Gewindestift M6x Ø 6, 17 12,25 ~ x 0 Zum Anfertigen von Schutzelementen, Schwenk- und Schiebetüren. Hohe Festigkeit des Rahmens durch eingespannte Flächenelemente. Lieferung erfolgt mit Klemmleiste und 12,25 Gewindestift M6x 2.10

13 SERIES SLOT Ø 6, PROFILE 0 slot Article no.: 1 Ix 26,7 cm 4 Iy 101,19 cm 4 Wx 13,44 cm³ Wy 25,29 cm³ 16,76 cm² 4,53 kg/m 12,25 0 Ø 6, PROFILE 0L 2N slot Article no.: 2 Ix 17,73 cm 4 Wx,63 cm³ Iy 70,7 cm 4 Wy 17,72 cm³ 11,60 cm² 3,13 kg/m 12,25 0 Ø 6, PROFILE 0 3N90 slot Article no.: 79 Ix 1,24 cm 4 Wx 9,17 cm³ Iy 76,12 cm 4 Wy 17,72 cm³ 11,9 cm² 3,14 kg/m 12, PROFILE 0 0L slot Article no.: 90 6, 12,25 Ø 0 Ix 134,06 cm 4 Wx 33,51 cm³ Iy 134,06 cm 4 Wy 33,51 cm³ 19,75 cm² 5,33 kg/m 2.11

14 SERIES SLOT PROFILE 0 0 slot Article no.: 91 0 Ix 17,70 cm 4 Wx 46,92 cm³ Iy 17,70 cm 4 Wy 46,92 cm³ 26,66 cm² 7,19 kg/m 12,25 Ø 6, 0 Ø 6, PROFILE 1L slot Article no.: 3 Ix 24,22 cm 4 Wx 12,11 cm³ Iy 2,54 cm 4 Wy 36,76 cm³ 16,12 cm² 4,35 kg/m 1 12,25 Ø 6, PROFILE 1 slot Article no.: 4 Ix 39,0 cm 4 Wx 19,90 cm³ Iy 322,66 cm 4 Wy 53,77 cm³ 24,3 cm² 6,5 kg/m 12,

15 SERIES SLOT 0 PROFILE 0 1L slot Article no.: 95 12,25 Ø 6, 1 Ix 1,9 cm 4 Wx 50,47cm³ Iy 421,67 cm 4 Wy 6,34 cm³,13 cm²,13 kg/m 0 6, PROFILE 0 1 slot Article no.: 96 12,25 Ø 1 Ix 274,6 cm 4 Wx 6,71 cm³ Iy 574,6 cm 4 Wy 92,72 cm³,05 cm² 10,1 kg/m Ø 6, PROFILE 160L slot Article no.: 5 Ix 31,1 cm 4 Wx 15,90 cm³ Iy 500,32 cm 4 Wy 62,54 cm³,90 cm² 5,64 kg/m 12,

16 SERIES SLOT PROFILE 160 slot Article no.: 6 Ø 6, Ix 52,72 cm 4 Wx 26,36 cm³ Iy 739,62 cm 4 Wy 92,45 cm³ 32,00 cm²,64 kg/m 12, PROFILE 0 160L slot Article no.: 99 0 Ix 267,07 cm 4 Wx 66,77 cm³ Iy 907, cm 4 Wy 113,4 cm³ 37,0 cm² 10,21 kg/m 12,25 Ø 6, 160 PROFILE slot Article no.: Ix 360,9 cm 4 Iy 122,33 cm 4 Wx 90,22 cm³ Wy 153,54 cm³ 50,07 cm² 13,52 kg/m 12,25 Ø 6,

17 SERIES SLOT PROFILE 16L slot Article no.: 56 5 Ø 12,25 16 Ix 0,64 cm 4 Iy 3,34 cm 4 Wx 0,7 cm³ Wy 1,67 cm³ 2,24 cm² 0,60 kg/m PROFILE 16 slot Article no.: 55 Ø 5 12,25 16 Ix 1,05 cm 4 Iy 6,9 cm 4 Wx 1,22 cm³ Wy 3,45 cm³ 4,24 cm² 1,12 kg/m 0 PROFILE 0 16 slot Article no.: 4,2 Ø 12,25 16 Ix 2,15 cm 4 Wx 2,69 cm³ Iy 50,76 cm 4 Wy 12,69 cm³,13 cm² 2, kg/m 16 PROFILE slot Article no.: 9 12,25 Ix 3,0 cm 4 Wx 4,25 cm³ Iy 7,3 cm 4 Wy 3,4 cm³ 13, cm² 3,75 kg/m ,2 2.15

18 SERIES SLOT PROFILE L 45 slot Article no.: 67 Ø 6, Ix 6,50 cm 4 Wx 2,90 cm³ Iy 6,50 cm 4 Wy 2,90 cm³ 5,5 cm² 1,50 kg/m 45 Ø 6, 45 12, PROFILE 45 slot Article no.: 66 Ix 9,39 cm 4 Wx 4,0 cm³ Iy 9,39 cm 4 Wy 4,0 cm³ 7, cm² 1,97 kg/m PROFILE L R - 90 slot Article no.: 61 12,25 R Ix 6,65 cm 4 Wx 3,04 cm³ Iy 6,65 cm 4 Wy 3,04 cm³ 5,72 cm² 1,54 kg/m Ø 6, PROFILE R / R0 - slot Article no.: 73 Ix 6,42 cm 4 Wx 2,4 cm³ Iy,90 cm 4 Wy 3,0 cm³ 6, cm² 1,67 kg/m R 0 R 12,25 PROFILE R / R0-45 slot Article no.: 74 Ø 6, Ix 21,33 cm 4 Wx 6,74 cm³ Iy 16,06 cm 4 Wy 6,14 cm³ 10,23 cm² 2,76 kg/m R 0 45 R 12,

19 SERIES SLOT PROFILE R/R0-60 slot Article no.: 75 R 0 Ø 6, 60 Ix 22,64 cm 4 Wx 5,96 cm³ Iy 34,92 cm 4 Wy 11,56 cm³ 10,50 cm² 2,2 kg/m R 12,25 Ø 6, 90 PROFILE R/R0-90 slot Article no.: 76 Ix 76,25 cm 4 Wx 1,69 cm³ Iy 76,25 cm 4 Wy 1,69 cm³ 15,00 cm² 4,05 kg/m R 0 R 12,25 PROFILE 32 1 slot Article no.: 35 12,25 Ix 2,50 cm 4 Wx 1,70 cm³ Iy 2,50 cm 4 Wy 1,70 cm³ 3, cm² 0,90 kg/m Ø 14 SHAFT CLAMP PROFILE slot Article no.: ,36 cm² 0,36 kg/m SHAFT D14 Article no.: : : Hardened steel, Cf53, polished 1,21 kg/m 2.17

20 PROCESSING ALUMINIUM PROFILES SERIES PROFILE PROCESSING FOR CENTRING PLATE KIT s5 s6 s Article no.: 003 Profile x slot 5 Hole Ø Distance (b) Thread Ø 5mm 10mm M5 Article no.: 005 Profile x slot 6 Hole Ø Ø 6mm Distance (b) 15mm Thread M6 -M- b Ø Article no.: Profile x slot Hole Ø Ø 7mm Distance (b) mm Thread M PROFILE PROCESSING FOR UNI CLAMPING KIT s5 s6 s Article no.: Profile x slot 5 Hole Ø Ø 12mm 3710 Distance (b) 11mm Ø Depth (c) 9 mm Article no.: b Profile x slot 6 Hole Ø Distance (b) Depth (c) Ø 16mm 15mm 14 mm Article no.: 3710 Profile x slot Hole Ø Ø mm Distance (b) 21mm Depth (c) 1 mm c 2.1

21 PROCESSING ALUMINIUM PROFILES SERIES b PROFILE PROCESSING FOR BOLT CONNECTOR slot Article no.: Profile x Nut Hole (Ø a) Distance (b) Ø 14,1mm mm Ø a Article no.: Profile 0x0 Nut bzw. x0 Nut Hole (Ø a) Distance (b) Ø 14,1mm mm QUICK CONNECTOR with rotation lock slot Central connector Article no.: 3250 Ø Slot mm Steel galvanised Ø

22 PROCESSING ALUMINIUM PROFILES SERIES ITEM DESIGNATION ARTICLE NO. Cuts 1 Saw cut up to & including x Saw cut up to & including 60x Saw cut up to & including 90x Saw cut greater than 90x Saw cut on mitre Holes 6 Hole up to & including Ø Hole up to & including Ø Hole up to & including Ø.0 10 Thread 9 Thread M Thread M Thread M Thread M Thread M

23 TECHNICAL DATA ALUMINIUM PROFILES SERIES EXTRUSION PROFILES PER DIN EN 1-1 Alloy AL Mg SI 0,5 F25 No (heat-hardened) Mechanical data (values in pressing direction) Tensile strength Rm min. 2 N/mm² Yield limit Rp 0.2 min. 190 N/mm² Breaking elongation A5 min. 10% E module approx N/mm² Brinell hardness approx. 75 HB 2,5/17,5 Coefficient of linear expansion 23,x10-6/K Surface per DIN E6/EV1- matt pickled and natural colour anodised Layer thickness approx. 10µm Layer hardness HV Special colours on request Delivery length 6000mm (or special data in the catalogue) Profile tolerances The dimension information is dependent on the production accuracy of the tools, the tool wear and the production fluctuations. Within a profile production batch deviations arise within the 1/100 range. PROFILE TOLERANCES IN MM Measurement range from - to Tolerance ± 0 10 ± 0, ± 0, 15 ± 0,25 45 ± 0, ± 0, ± 0, ± 0, ± 0, ± 1, ± 1, 2.21

24 CONNECTION TECHNOLOGY SERIES PROFILE CONNECTOR slot Profile connector slot Article no.: Length Scope of supply Slot 10mm 6 Incl. fastening kit M6 10 mm Steel galvanised,5,5 ANGLE CONNECTOR 45 slot Angle connector 45 Article no.: Profile Scope of supply Slot x Incl. fastening kit M mm Zinc die cast, aluminium colour-coated Ø,5 10 QUICK CONNECTOR screw-in slot Screw-in type Article no.: 3225 Ø17 M10 Thread Hole Slot M10 17mm mm Steel galvanised SW6 For fastening aluminium profiles to plates 61 BOLT CONNECTOR Ø 14MM slot Bolt connector Article no.: Ø14 Length Slot mm mm Steel galvanised Bolt connector 0 Article no.: Ø14 Length Slot 0mm mm Steel galvanised 65,5 Conductive material design per DIN EN ; suitable for use in ESD protected zones. 2.22

25 CONNECTION TECHNOLOGY SERIES 35,1 QUICK CONNECTOR with rotation lock slot Ø 7, Ø 11, Quick connector with rotation lock Article no.: 3250 SW4 Slot mm Galvanised steel Ø 17,4 2.23

26 c CONNECTION TECHNOLOGY SERIES UNI CLAMPING KIT slot 5 slot 6 slot Uni clamping kit slot 5 a= Ø12mm, b= 11mm, c= 9mm Article no.: Uni clamping kit a= Ø16mm, b= 15mm, c= 14mm Article no.: Ø a 3710 Uni clamping kit a= Ømm, b= 21mm, c= 1mm Scope of supply Article no.: 3710 Incl. connector, screw and slot nut Zinc die cast b b b 3710 UNI BUTT CONNECTOR slot Uni butt connector a= Ømm, distance b= 21mm, Depth c= 16,5mm Scope of supply Article no.: 3710 Incl. connection kit and screw Zinc die cast c Ø a Ø a b b CENTRING PLATE KIT slot 5 slot 6 slot Centring plate kit slot 5 a= 10mm, Ø4,5mm, M5 Article no.: 003 Centring plate kit slot 6 a= 15mm, Ø5,5mm, M6 Article no.: 005 Centring plate kit slot a= mm, Ø7,5mm, M Article no.: 010 b 010 Ø -M- Scope of supply Incl. connector, screw Steel galvanised 2.24

27 CONNECTION TECHNOLOGY SERIES Ø 7,1 FORM CONNECTOR/ SCREW CONNECTOR slot 5 slot 6 slot 6.4 Form connector slot 5 Scope of supply Article no.: Sleeve, screw M4, slot nut Form connector slot 6 Scope of supply Article no.: Sleeve, screw M5, slot nut Ø 10 Form connector slot Scope of supply Article no.: Sleeve, screw M, slot nut Screw-in connector (M6) Scope of supply Article no.: Sleeve, screw M6, slot nut Ø 12 Cover cap for screw-in connector for Art.no Article no.: form connector cover cap Steel galvanised PA, black Connector slot 5 and slot 6 with right-handed thread; connector slot with left-handed thread! AM6 3 AM AM Ø 12 CONNECTING PLATE slot 6 slot x60 Article no.: x0 Article no.: Steel, powder-coated black STEEL BRACKET slot x Artikel Nr.: 350 Steel, powder-coated black 2.25

28 CONNECTION TECHNOLOGY SERIES BRACKET slot 5 Without fastening kit Slot 5 Article no.: With fastening kit Slot 5 Article no.: Zinc die cast Aluminium colour-coated BRACKET slot 6 Without fastening kit Slot 6 Article no.: With fastening kit Slot 6 Article no.: Zinc die cast Aluminium colour-coated BRACKET 60 slot 6 Without fastening kit Slot 6 Article no.: With fastening kit Slot 6 Article no.: Zinc die cast Aluminium colour-coated BRACKET slot Without fastening kit Slot Article no.: With fastening kit Slot Article no.: Zinc die cast Aluminium colour-coated

29 CONNECTION TECHNOLOGY SERIES BRACKET 0 slot Without fastening kit Slot Article no.: With fastening kit Slot Article no.: Zinc die cast Aluminium colour-coated BRACKET 0 0 slot Without fastening kit Slot Article no.: With fastening kit Slot Article no.: Zinc die cast Aluminium colour-coated BRACKET slot Without fastening kit Slot Article no.: With fastening kit and cover cap Slot Article no.: Zinc die cast Aluminium colour-coated

30 CONNECTION TECHNOLOGY SERIES CLAMPING ANGLE slot x slot Article no.: Ø 9,5 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated ,5 36 JOINT ANGLE slot x slot Article no.: 3512 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated Ø 14 Ø Ø 9 36 CORNER BRACKET slot 6 slot x slot 6 Article no.: Ø 6,5 x slot Article no.: ,5 Scope of supply Bracket, fastening kit Zinc die cast Aluminium colour-coated ,5 5 Ø 9 37,2 37,2 2.2

31 CONNECTION TECHNOLOGY SERIES COVER CAP FOR CORNER BRACKET slot 6 slot x angled Article no.: 3515 x round Article no.: 3516 x angled Article no.: 35 x round Article no.: 35 Plastic PA COVER CAPS FOR BRACKETS slot 5 slot 6 slot xx Article no.: xx Article no.: xx Article no.: x0x0 Article no.: x0x0 Article no.: Plastic PA 2.29

32 CONNECTION TECHNOLOGY SERIES COVER CAPS FOR ALUMINIUM PROFILES s5 s6 s Slot 5 Slot 6 Slot t = 4mm t = 3mm t = 4mm Plastic PA Cover caps for aluminium profiles Item Designation Article no. 1 10x x x x x x x60 t=2, x x x x xr x R/ R/ R/ R/ x screw-mountable for screw countersunk M4x16 19 x with hole Ø10,5mm x x0 screw-mountable for screw countersunk M4x16 22 x x x x x

33 CONNECTION TECHNOLOGY SERIES 2.31

34 CONNECTION TECHNOLOGY SERIES SLOT NUT SLOT 5 swivelling with ball Slot 5 M3 Article no.: 3510 Slot 5 M4 Article no.: ,9 35 Slot 5 M5 Article no.: 35 Steel galvanised 7,7 4,6 0,6 M SLOT NUT SLOT 6 swivelling with ball Slot 6 M3 Article no.: 3505 Slot 6 M4 Article no.: 3515 Slot 6 M5 Article no.: ,4 0, Slot 6 M6 Article no.: 3535 Steel galvanised M SLOT NUT SLOT swivelling with ball Slot M4 Article no.: 3550 Slot M5 Article no.: Slot M6 Article no.: 3550 Slot M6 ESD Article no.: , 0, Slot M Article no.: ,5 7,2 Slot M ESD Article no.: Stahl, verzinkt M 2.32

35 CONNECTION TECHNOLOGY SERIES 22 SLOT NUT SLOT VA swivelling with ball 7, 0, Slot M5 Article no.: ,5 7,2 Slot M6 Article no.: Slot M Article no.: M Stainless steel 23 SLOT NUT SLOT heavy, without stay Slot M6 Article no.: , Slot M Article no.: 3550 Steel galvanised M SLOT NUT SLOT heavy, with stay 22 7,9 2,9 Slot M4 Article no.: 3560 Slot M5 Article no.: ,6 Slot M6 Article no.: Slot M Article no.: M Steel galvanised 14 RHOMBOID T-SLOT NUT swivelling, slot Slot M4 Article no.: ,9 Slot M5 Article no.: M 19,3 Slot M6 Article no.: 3570 Steel galvanised 2.33

36 CONNECTION TECHNOLOGY SERIES BUTTON HEAD SCREWS M4 ISO 7 M4 x 6 Article no.: M4 x Article no.: 3700 M4 x 10 Article no.: 3700 M4 x 12 Article no.: 3700 M4 x 14 Article no.: Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS M5 ISO 7 M5 x 10 Article no.: M5 x 12 Article no.: M5 x 14 Article no.: M5 x 16 Article no.: M5 x Article no.: Strength class 10.9 Galvanised steel Other screw forms, screw sizes and thread sizes on request 2.34

37 CONNECTION TECHNOLOGY SERIES BUTTON HEAD SCREWS M6 ISO 7 M6 x 10 Article no.: 3701 M6 x 12 Article no.: 3701 M6 x 14 Article no.: 3701 M6 x 16 Article no.: M6 x Article no.: Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS M ISO 7 M x 16 Article no.: M x 1 Article no.: M x Article no.: M x Article no.: 3700 Strength class 10.9 Galvanised steel BUTTON HEAD SCREWS with flange ISO 7-2 M6 M6 x 14 Article no.: M6 x 16 Article no.: 3702 M6 x Article no.: 3702 Strength class 10.9 Galvanised steel 2.35

38 ACCESSORIES SERIES PLASTIC HINGES slot 6 slot x Article no.: 4210 Dimensions A1=17,5mm A2=17,5mm B1=29,5mm B2=29,5mm slot 6mm Ø 6 Ø 14 x Article no.: Dimensions A1=17,5mm A2=22,5m B1=29,5mm B2=3,5m slot 6 slot Nut Ø 6,6 x Article no.: Ø Ø 14 13,3 Ø, Dimensions A1=22,5mm A2=22,5mm B1=3,5mm B2=3,5mm slot mm 2 Scope of supply Hinges with fastening kit Plastic PA glass fibre reinforced, axis stainless steel B1 A1 A2 B2 Ø 6 HINGES WITH ELONGATED HOLE Ø 14 x60 slot 6 Article no.: 45 9,5 x0 slot Article no.: 51 Zinc die cast, axis stainless steel ,5 6,4 Ø 6,

39 ACCESSORIES SERIES HINGE INTERNAL ALUMINIUM slot Hinge left Article no.: Hinge right Article no.: 4245 Ø 5,5,5,5,5 Ø 5 Scope of supply Hinge without fastening kit Anodised aluminium, axis stainless steel ,5 4,5 5 R5,5 Ø 6,6 Ø 6,6 R5, Nut2 Nut1 HINGES ALUMINIUM s5 s6 s x Article no.: Dimensions A1=11,25mm A2=11,25mm B1=19,5mm B2=19,5mm slot 1=5mm, slot 2=6mm Ø 2,5 Ø Ø 4,5 x Article no.: Dimensions A1=17,5mm A2=17,5m B1=29,5mm B2=3,5m slot 1=6mm, slot 2=mm x Article no.: Dimensions A1=22,5mm A2=22,5mm B1=35,5mm B2=35,5mm slot 1=mm, slot 2=10mm Scope of supply Hinge without fastening kit Anodised aluminium, axis stainless steel Ø 6,2 Ø 14 Ø 6, Nut2 Nut1 Ø 2,5 Ø Ø 4,5 Nut 1 Nut B1 A1 Ø 6,2 A2 B Ø 14 Ø 6,5 Nut 1 Nut A1 A2 B1 B & A1 A2 B1 B2 2.37

40 ACCESSORIES SERIES DOOR LOCK Montage requires further processing slot 6 slot Simultaneous locking Article no.: 10 Separate locking Article no.: 0 64,5 75 Zinc die cast,, 45, 50 > DOOR LOCK COMPACT No further processing required Simultaneous locking Article no.: Separate locking Article no.: Aluminium die cast,, 45, 50 > UNIVERSAL BULLET LATCH s6 s s10 7 Universal bullet latch Article no.: 50 Plastic PA, glass fibre reinforced , ,4 24,5 31,5 36,

41 Ø 7 12,5 SW 13 M 5,2 12,5 BULLET CATCH slot 6 slot Bullet catch Article no.: 5022 Plastic PA, glass fibre reinforced , ACCESSORIES SERIES , MOUNTING BRACKET FOR BULLET CATCH Mounting bracket Article no.: Steel, black powder coated , MAGNETIC LATCH slot 6 slot Magnetic latch Article no.: ,50 Plastic PA, glass fibre reinforced 5010 DOOR STOP slot Door stop (with fastening kit) Article no.: 5050 Ø 4, Ø 4,5 Function Stop bracket with wedge For damping with 2 elastomer inserts Plastic PA glass fibre reinforced 2.39

42 ACCESSORIES SERIES 60 PLASTIC HANDLE Handle PA 0 Article no.: 5 Dimensions a = 90mm b = 32mm c = 0mm d =12mm e = Ø4,5mm Handle PA 1 Article no.: 60 Dimensions a = 136mm b = 4,5mm c = 1mm d =17mm e = Ø5,5mm Handle PA 160 Article no.: 70 a c b Dimensions a = 1mm b = 60mm c = 160mm d =2mm e = Ø,5mm d Ø e 70 Plastic PA, glass fibre reinforced COVER CAP FOR HANDLE Cover cap for handle PA 160 Article no.: 71 Plastic PA glass fibre reinforced 71 ASK HANDLE SYSTEM ASK handle system Article no.: Dimensions X = 0-500mm ASK Griffsystem Article no.: 50 Dimensions X = mm Plastic PA,glass fibre reinforced 2.

43 ACCESSORIES SERIES ~35 HANDLE 160, ANGLED Handle, angled 160 Article no.: Anodised EL (natural colour) 32 M HANDLE 1 Handle 1 Article no.: 3100 Aluminium, black 10 M 5 Ø 10 1 HANDLE 1, CURVED Handle 1 curved Article no.: 3101 Aluminium, black 10 M 5 Ø MOUNTING KIT FOR HANDLE AL1 Article no.: 3102 Scope of supply 2 straps 1, GD-Zn, black 2 countersunk screws DIN7991 M5x10, Steel galvanised 2.41

44 ACCESSORIES SERIES CARRIER ROLLER WITH BALL BEARING Carrier roller slot For linear movement in the profile slot s Article no.: Max. payload 150N Plastic PA glass fibre reinforced 7 ROLLER HOLDER slot slot 10 Roller holder Article no.: Roller holder ESD Article no.: Slot mm / 10mm Plastic PA, glass fibre reinforced Ø 6,5 SLIDING STRIP slot Sliding strip Article no.: Length Slot 00mm mm Plastic PA, glass fibre reinforced 12, 4 10 BALL CASTER BC 15 slot Ball caster 15 Article no.: Dimensions Ball Ø 15,0mm Housing: galvanised steel; Ball: stainless steel 21 9,5 2,0 6, Ø 24 Ø 31 Conductive material design per DIN EN ; suitable for use in ESD protected zones. 2.42

45 ACCESSORIES SERIES Rollenlänge=(EL-3) ROLLERS FOR ROLLER TRACK slot Installation length EL = up to 0mm Installation length EL = up to 500mm Article no.: 4170 Article no.: 4170 Installation length EL = up to 00mm Article no.: 4170 Sägelänge=(EL-) Einbaulänge=(AL-) Achslänge=(El+) Axis Tube Load bearing capacity per roller Roller length according to customer wishes, please quote when ordering: Ø mm Ø mm Max. 150 N Anodised aluminium AL = RL = EL = mm mm mm CLAMPING LEVER WITH RELEASE KNOB Clamping lever Mx12 Article no.: Clamping lever Mx16 Article no.: Clamping lever Mx Article no.: Clamping lever Mx25 Article no.: 3705 Clamping lever Mx Article no.: 3705 Clamping lever Mx55 Article no.: 3705 L Lever: Thermoplastic, thread: Steel galvanised M Ø,

46 9 9 ACCESSORIES SERIES JOINT slot 5 x Article no.: Ø 6, Ø 6, Slot 5mm Zinc die cast, powder-coated JOINT slot 6 x Article no.: x with clamping lever Article no.: Slot 6mm Zinc die cast, powder-coated JOINT slot x Article no.: x with clamping lever Article no.: 4260 Slot mm Zinc die cast, powder-coated SW 14 SW 14 Ø,3 Ø,3 Ø,3 Ø, , JOINT 0 slot x 0 Article no.: 4260 SW SW x 0 with clamping lever Article no.: 4260 Slot mm Zinc die cast, powder-coated Ø Ø,3,

47 ACCESSORIES SERIES SWIVEL FASTENING slot Article no.: 4150 R 50 R 65 Slot mm / mm Steel galvanised Ø,1 22,5 Ø,2 2,5 6,3 15,5,

48 ACCESSORIES SERIES COVER AND CLOSURE PROFILE slot 5 Slot 5 black Article no.: 4135 Length Panel thicknesses 00mm 1-3mm PP+TPE 0, , COVER AND CLOSURE PROFILE slot 6 Slot 6 black Article no.: Length Panel thicknesses 00mm 2-4mm PP+TPE 0, 6 7 9,1 COVER AND CLOSURE PROFILE slot Slot black Article no.: 4145 Slot transparent Article no.: Length Panel thicknesses 00mm 4-6mm PP+TPE 0,7 9,4 COVER AND CLOSURE PROFILE slot Slot transparent Article no.: 4147 Length Panel thicknesses 00mm 0,-3mm PP+TPE 11 0,7 9,4 SEALING PROFILE slot Sealing profile 4-6 Panel thicknesses Article no.: mm 7 11, Sealing profile 4-6 Panel thicknesses Article no.: mm Length Rolled goods TPE black

49 ACCESSORIES SERIES FASTENING OF SURFACE ELEMENTS slot 5 slot 6 slot FASTENING ELEMENT ARTICLE NO. SLOT L2 COMMENT Clamping block mm L1-11mm Closure profile mm 6mm mm mm mm L1 + 10mm L1 + 1mm L1 + 21mm L1 + 21mm L1 + 21mm Sealing profile mm mm L1 + 21mm L1 + 23mm Without (directly in the slot) 5mm 6mm mm L1 + 11mm L1 + 1mm L1 + 22mm Also sealing profile 2.47

50 ACCESSORIES SERIES MULTI-UNIBLOCK slot 5 slot 6 slot Slot 5 M4 Article no.: Slot 6 M5 Article no.: Slot M6 Article no.: Slot M6 Slot M6 with captive screw, incl. O-ring, dimensions identical to Article no.: Plastic PA glass fibre reinforced

51 ACCESSORIES SERIES 1 5 4,5 21 CLAMPING BLOCK slot Slot Article no.: Panel thicknesses 1-9mm Plastic PA, glass fibre reinforced 19,50 FASTENING OF SURFACE ELEMENTS slot 5 slot 6 slot 22 FASTENING ELEMENT ARTICLE NO. SLOT L2 COMMENT Multi-Uniblock mm 6mm mm L1-2mm L2 L , ,5 13, , M4 M5 M6 2.49

52 ACCESSORIES SERIES A CROSS-CABLE TIE BLOCK slot Slot Article no.: Plastic PA glass fibre reinforced 10 A 2 4,5 CABLE CARRIER WITH DIVIDER slot Slot Article no.: ,6 Plastic PA glass fibre reinforced 4,5 16 CABLE CARRIER WITHOUT DIVIDER slot Slot Article no.: Plastic PA glass fibre reinforced 16 4,5 COVER PROFILE PLASTIC slot Black Article no.: 4170 Light grey Article no.: , Slot Length mm 00mm Plastic PP 5,3 COVER PROFILE ALUMINIUM slot Slot Article no.: ,1 Length 00mm Anodised aluminium 4 6,6 7,9 2.50

53 74 ACCESSORIES SERIES 1,5 COVER PROFILE R0 ALUMINIUM Article no.: ,7 Length max. 0,55 kg/m 6000mm Anodised aluminium R54,7 74,1 4 COVER CAP R0 PLASTIC Article no.: PA, black 14,7 CLIP Article no.: Recommended quantity per m Steel galvanised 5 pieces per m 9,3 4 31,5 Slot Rolled goods 32 x 4 mm Article no.: ,5 Plastic, NBR black 9 13 Ø 6, 17,7 25,5 Symmetrical system slide Article no.: Asymmetrical system slide Article no.: Plastic PA Ø 6, 17, ,5 COVER PROFILE RUBBER slot FASTENING OF SURFACE ELEMENTS slot

54 CABLE DUCTS ALUMINIUM SERIES ALUMINIUM CABLE DUCT Cable duct x a=mm, b=37mm, c=35,5mm Article no.: Cable duct x 0 a=0mm, b=77mm, c=35,5mm Article no.: 5110 Cable duct 0 x 0 a=0mm, b=75mm, c=75mm Article no.: 5110 c Cable duct 0 x 1 a=1mm, b=115mm, c=75mm Article no.: Cable duct 0 x 160 a=160mm, b=115mm, c=75mm Length max. Article no.: mm Anodised aluminium b a COVER FOR ALUMINIUM CABLE DUCT Cover a=mm, b=10,5mm Article no.: a Cover 0 a=0mm, b=10,5mm Article no.: b Cover 1 a=1mm, b=10,5mm Article no.: Cover 160 a=160mm, b=10,5mm Article no.: Length max. 00mm Anodised aluminium 2.52

55 CABLE DUCTS ALUMINIUM SERIES COVER CAPS FOR CABLE DUCT Cover cap x a=mm, b=mm Article no.: b 2 4 Cover cap x 0 a=mm, b=0mm Article no.: Ø 4,5 Ø,5 Cover cap 0 x 0 a=0mm, b=0mm Article no.: Cover cap 0 x 1 a=0mm, b=1mm Article no.: Cover cap 0 x 160 a=0mm, b=160mm Article no.: a Plastic, PA black SCREW FOR COVER CAP DIN 791 4,2 x 9,5 Sheet metal screw Article no.: 3705 Dimensions 4,2 x 9,5mm Galvanised steel 2.53

56 BASE ELEMENTS SERIES PLASTIC PLATE WITH MOUNTING HOLES Plate Ø 0 with mounting holes incl. rubber plate Article no.: Hole circle (LK) 55mm, Plastic PA glass fibre reinforced PLASTIC PLATE incl. rubber plate Plate Ø Article no.: 5010 Plate Ø Article no.: Plate Ø Article no.: Plate Ø 50 Article no.: 5013 Plate Ø 50 Article no.: Plate Ø 60 Article no.: 5013 Plate Ø 60 Article no.: Plate Ø 0 Article no.: Plastic PA glass fibre reinforced TRAPEZOIDAL PLATE, zinc die cast incl. rubber plate Plate Ø 60 H=1 Article no.: Plate Ø 0 H= Article no.: Plate Ø 0 mit Bohrung H= Article no.: Zinc die cast, powder-coated black Conductive material design per DIN EN ; suitable for use in ESD protected zones. 2.54

57 BASE ELEMENTS SERIES Ø 15 THREADED ROD WITH BALL FOR ARTICULATED FOOT M x L35 SW14 Article no.: M x L0 Article no.: M M10 x L70 SW14 Article no.: 501 SW L M10 x L90 Article no.: M12 x L55 SW14 Article no.: 5010 M12 x L100 Article no.: M12 x L125 Article no.: 5014 M12 x L150 Article no.: 5014 M16 x L115 SW17 Article no.: M16 x L150 Article no.: Steel galvanised Ø M12 THREADED SLEEVE Threaded sleeve Ø Article no.: Ø 17 Application Steel, galvanised Fastening of adjustable feet Conductive material design per DIN EN ; suitable for use in ESD protected zones. 2.55

58 BASE ELEMENTS SERIES ARTICULATED FOOT, STEEL Articulated foot Ø D44 M12x5 Dimensions Max. load. Articulated foot Ø D5 M12x5 Dimensions Max. load.. Article no.: a = 37 mm N Article no.: a = 5 mm N M Articulated foot Ø D44 M16x145 Dimensions Max. load. Article no.: a = 145 mm 000 N a Articulated foot Ø D90 M16x5 Dimensions Max. load. Article no.: a = 5 mm 000 N Articulated foot Ø D90 M16x145 Dimensions Max. load. Article no.: a = 145 mm 000 N Ø D Articulated foot Ø D90 M16x0 Dimensions Max. load. Article no.: a = 0 mm 000 N Galvanised steel Conductive material design per DIN EN ; suitable for use in ESD protected zones. DAMPING RING FOR ARTICULATED FOOT Damping ring Ø 44 D1 D2 Article no.: mm 44 mm Damping ring Ø 5 D1 D2 Article no.: mm 5 mm A A Damping ring Ø 90 D1 D2 Article no.: mm 90 mm SCHNITT A-A Natural PUR Ø D2 Ø D

59 BASE ELEMENTS SERIES -M- ASK COMBINATION FOOT Combination foot Ø D M x 35 Dimensions Max. load Article no.: a = 32 mm, b = 67 mm 3500 N Combination foot Ø D M10 x 70 Dimensions Max. load Article no.: a = 32 mm, b = 102 mm 7700 N a b Combination foot Ø D60 M10 x 70 Dimensions Max. load. Article no.: 5016 a = 32 mm, b = 102 mm 7700 N Ø -D- Combination foot Ø D0 M10 x 70 Dimensions Max. load Article no.: 5016 a = 32 mm, b = 102 mm 7700 N a -M- Combination foot Ø D0 M16 x 115 Dimensions Max. load Article no.: a = 32 mm, b = 147 mm N b Scope of delivery inkl. threaded rod, plastic plate and rubber plate Ø -D- Threaded rod, galvanised steel; Plate, plastic PA glass fibre reinforced 2.57

60 x60 M t=12 (W x L) Artikel Nr.: A-A x60 M10 t=16 (W x L) Article no.: x0 M10 t=16 (W x L) Article no.: x0 M12 t=16 (W x L) Article no.: B t BASE ELEMENTS SERIES BASE PLATES (with thread for articulated feet) M6 (DIN 912) bzw. M (DIN794) M x0 M16 t=16 (W x L) Article no.: A L A x0 M10 t= 16 (W x L) Article no.: x0 M12 t=16 (W x L) Article no.: x0 M16 t=16 (W x L) Article no.: Screws (Not included in the scope of supply!) Zinc die cast, powder-coated black DIN794 Mx25 (x0/0x0) or DIN912 M6x (x60) 2.5

61 ,5 19,5 52 A A 27, BASE ELEMENTS SERIES 5005 STEEL FOUNDATION BRACKET 42 x 160 Article no.: x 0 Article no.: 5010 Steel galvanised Conductive material design per DIN EN ; suitable for use in ESD protected zones FOUNDATION BRACKET ZINC DIE CAST x 160 Article no.: 50 Zinc die cast, powder-coated black A-A 11,

62 5 BASE ELEMENTS SERIES 45 UNIVERSAL FLOOR SUPPORT slot Universal floor support gerade Variante Scope of supply Article no.: 5050 Floor support without fastening kit Steel galvanised Ø 9 1 UNIVERSAL FLOOR SUPPORT slot Universal floor support corner variant Article no.: , (4x),5 (4x) 25 26,75 Scope of supply Floor support without fastening kit Steel galvanised Ă FASTENING BRACKET for telescopic support R 5,10 10 Ø 10, Fastening bracket for telescopic profile 54x6 (Article no.: 11, page 1.16) Article no.: Ø,5 27 Steel galvanised 62 Conductive material design per DIN EN ; suitable for use in ESD protected zones. 73,

63 BASE ELEMENTS SERIES M ANCHOR BOLT Anchor bolt Ø / M a= Hole depth b= Effective anchoring depth c= Fastening height d= Thread length e= Total height Article no.: mm mm mm 45 mm 0 mm a c d b e Anchor bolt Ø 10 / M a= Hole depth b= Effective anchoring depth c= Fastening height d= Thread length e= Total height Article no.: mm 42-4 mm mm 45 mm 90 mm Galvanised steel 2.61

64 Ø 75 normal ESD Brake Unbrak. Brake Unbrak. Ø D2 = 11mm Ø D2 = 12,5mm Load bearing capacity 750 N 00 N 1000 N a 24 mm 43,5 mm I 3 mm I 43,5 mm I 3 mm 41 mm b 100 mm 135 mm 160 mm c 25 mm 32 mm 32 mm Ø D 75 mm 100 mm 125 mm a b c a b c WHEELS AND CASTERS FOR SERIES CASTERS WITH BOLT HOLE Ø 100 Ø 125 normal ESD normal ESD Brake Unbrak. Brake Unbrak Brake Unbrak. Brake Unbrak Conductive material design per DIN EN ; suitable for use in ESD protected zones. Ø D Ø D Ø D2 Ø D

65 12,2 WHEELS AND CASTERS FOR SERIES 36,5 LIFTING CASTER Load bearing capacity Article no.: N 2 Scope of supply incl. fastening kit Function Adjustable with levelling spindle max.10mm over caster level (without tools) Ø 71 Housing: Die cast aluminium, powder-coated; Roller: Polyamide PA6 Fixed caster: Aluminium, rubber 97 CASTER LIFTING WHEEL Article no.: Load bearing capacity Function N Wheel easily turns into a stable base by engaging the stop lever Ø 0 Wheel: PA 6, natural white Housing: Galvanised steel Base plate: Galvanised steel with rubber insert , Ø 15 SCHNITT A-A M Ø 9 12 MOUNTING PLATE Artikel Nr.: , , , A A 70 Funktion Mounting plate for Caster Lifting Wheel (502210) galvanised steel 77,50,

66 WHEELS AND CASTERS FOR SERIES CASTERS WITH SCREW-ON PLATE Ø 75 Ø 100 Ø 125 normal ESD normal ESD normal ESD Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Brake Unbrak. Swivel caster with screwon plate Fixed caster with screwon plate Load bearing capacity Dimensions a b c d e f g h i 750 N 25 mm 100 mm 4 mm 3 mm 25 mm 4 mm 3 mm 6,3 mm 60 mm j 60 mm ØD 75 mm 00 N 43,5 mm 3mm 43,5 mm 3 mm 135 mm 51,5 mm 46,5 mm 32 mm 61,5 mm 56 mm,5 mm 77 mm 67 mm 100 mm 1000 N 41 mm 160 mm 51,5 mm 46,5 mm 32 mm 61,5 mm 56 mm,5 mm 77 mm 67 mm 125 mm Conductive material design per DIN EN ; suitable for use in ESD protected zones. FASTENING KITS FOR WHEELS AND CASTERS Fastening kit for casters Ø 75 with bolt hole in slot 10 Article no.: Fastening kit for casters Ø 100 Ø 125 with bolt hole Ø 12.5 in core hole Article no.: Fastening kit for casters with screw-on plate (please cite profile) Article no.:

67 a 100 Ø Ø ,5 46, , Ø ,5 46, ,5 77 b 5035 Ø D i f g e d c j a b Ø D i f g d c j WHEELS AND CASTERS FOR SERIES CASTERS WITH SCREW-ON PLATE e h h FIXED CASTERS WITH SCREW-ON PLATE ,5,5 6,3 2.65

68 WHEELS AND CASTERS FOR SERIES HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 With brake Article no.: Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 2363g - C / +0 C Shore D60 Ø HEAVY DUTY CASTER WITH SCREW-ON PLATE Ø 160 Without brake Article no.: Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 25g - C / +0 C Shore D60 0 Ø FIXED CASTER HEAVY DUTY WITHOUT BRAKE Ø 160 Fixed caster without brake Article no.: Dynamic bearing capacity Static bearing capacity Net weight Temperature range Running surface hardness 00 N 000 N 1573 g - C / +0 C Shore D Ø Ø

69 2.67