GISMA UNDERWATER CONNECTORS SERIES 40

Transcription

1

2 CONTENTS SEITE / PAGE GENERAL 4 GENERAL ARRANGEMENT 5 DESIGN MECHANICAL FEATURES 7 FIBRE OPTIC FEATURS 7 ELECTRICAL FEATURES 7 REFERENCE SYSTEM 8 REFERENCE SYSTEM CONTACTS 9 CONTACT LAYOUTS 9 SUGGESTIONS FOR MATING OF PLUGS 9 RECEPTACLES 0 CABLE CONNECTING RECEPTACLES PLUGS ENDBELLS 2 SEALING / PROTECTING CAPS 3 QUALITY SYSTEM CERTIFICATE DIN/ISO This catalogue supersedes all previous catalogues. GISMA reserves the right to modify products because of technical improvements and development without prior notice. Dimensions are given for information purposes only and must be confirmed by GISMA. This catalogue is available as pdf-file as well. Katalog BR 40 Stand doc Seite / page - 3 -

3 GENERAL GISMA is today one of the leading manufacturers of high-performance electrical and fibre-optic underwater connectors. GISMA s success is based on:. A quality management system meeting the requirements of DIN ISO 900 with DNV (Det Norske Veritas) certificate. 2. Consistency in meeting the needs of the customer. 3. Short and absolutely reliable delivery times. 4. Diverse services ranging from advising individual customers to the delivery of fully-tested, terminated cable assemblies. Special orders are carried out quickly and efficiently using GISMA s own computer-aided design department, tooling and ultramodern computer controlled machines for production. With more than 95% of GISMA's production carried out in house, maximum flexibility is assured. GISMA connectors are used world-wide in submarines, the offshore and mining industries and for underwater research. GISMA offers an extensive family of standard connectors with contact numbers from - 30, voltages up to, kv and current ratings up to,000 A in 30 different series. All types of optical fibres, both single- and multi-mode, can be assembled with GISMA connectors. Certificates of approval from well known test organisations such as TÜV (Technical Supervision Association), GL (German LLoyd), DNV (Det Norske Veritas) etc. are available at extra charge. GISMA The series 40 described in this catalogue is designed for underwater fibre optic operations down to.000 metres' depth. 0 Low insertion loss is attained by direct connection. GISMA Series 40 receptacles are available for direct fibre fitting or with a receptacle on the rear. GISMA carry out the fitting of the fibre on request. Receptacles can be supplied with pigtail. For fitting the fibre to the contact special tools are required. Fibre and electrical contacts can be replaced by the customer. Therefor fibre and electrical contacts are available as single pieces. The endbells are removeable for maintenance. Endbells with strain relief e.g. kevlar armored cable are available on request. Katalog BR 40 Stand doc Seite / page - 4 -

4 GENERAL ARRANGEMENT removeable moulding-endbell with rubber boot outboard plug jam nut receptacle flange receptacle cable connecting receptacle with removeable moulding-endbell with rubber boot pressure watertight sealing cap pressure watertight sealing cap plastic protective cap splash watertight plastic protective cap splash watertight Katalog BR 40 Stand doc Seite / page - 5 -

5 DESIGN Kabel / cable Schellenband / clamp PUR-Verguß / PUR-moulding CR-Formteil / rubber boot Schellenband / clamp Epoxyschott / epoxy casting Gehäuseadapter / shell adapter LWL-Faser in Hohlader / f/o-fibre in plastic tube zweiteilige Hülse / two-piece tube Endgehäuseadapter / endbell adapter Steckergehäuse / plug shell Sicherungsschraube / safety screw Kontakt / contact Kontakt / contact Überwurfmutter / coupling nut Flanscheinbaudose / flange receptacle Katalog BR 40 Stand doc Seite / page - -

6 MECHANICAL FEATURES Pressure range: Size 0-5 min. 350 bars * Size 7 min. 300 bars * For extra high pressure ratings and inverse pressure receptacles, please contact GISMA application engineering. Shell material : - marine bronze (CW307G) (titanium on request) * Temperature range : C up to +80 C - connectors for different temperatures on request Mating operations : - min. 000 (clean environment) Shock : - 50 g ms FIBRE OPTIC FEATURES GISMA Series 40 connectors can be fitted with single- or multimode fibres. Attenuation (850 nm nm, dry) maximum (Basis to evaluate the typical layout of the amplifier) singlemode < 0,5 db < 0,7 db multimode < 0,5 db < 0,7 db Mating operations min : (clean environment) Return-loss (typical): - 40 db singlemode - 35 db multimode ELECTRICAL FEATURES Contact diameter : - 2 mm, gold plated mm, gold plated incl. AWG pigtails incl. AWG 20 pigtails 50 mm long 50 mm long Current max. : - 25 A 8 A Working voltage max. : - at clean environment at clean environment 30 V DC 000 V dc Contact resistance max. : - 3 m Ohm 5 m Ohm Test voltage : V dc 3000 V dc Insulation resistance: - > GΩ > GΩ Mating operations min. : We would like to particularly point out that special know-how and tools are essential for connecting LWL-fibre with the contact (ferrule). Special cabling instructions are available on request at GISMA. * The described pressure rates are only valid for standard components made of bronze. For extra high pressure ratings and other shell materials, please contact GISMA application engineering. For all Series 40 special product designs, please pay attention to separate data sheets. Katalog BR 40 Stand doc Seite / page - 7 -

7 REFERENCE SYSTEM RECEPTACLE, CABLE CONNECTING RECEPTACLE, PLUG series standard-receptacle 0 cable connecting receptacle receptacle with single rear receptacle 5 plug single fibre optic plug for rear receptacle 7 shell size - contact arrangement 0.0 contact.0 contact contacts 3.0 contacts contacts contacts contacts contacts contacts keyway type (if necessary) X keyway 44 Y keyway Z keyway 88 W keyway 0 00 standard 0 flange receptacle shell-material stainless-steel (.4404) 2 marine bronze (CW307G) 3 titanium N.B.: All series 40 connectors are supplied without contacts. Electrical resp. fibre-optic contacts must be ordered separately. ENDBELLS series standard version straight 0 angled 90 on request straight with central kevlar 3 strain relieve XXXX 4 outer cable-ø in mm (e.g. 0 mm = cable Ø 0 mm) shell size 0-7 removeable moulding endbell with rubber boot 0 PROTECTING CAPS series cap for receptacle, not watertight 20 cap for plug, not watertight 30 cap for receptacle, pressure watertight 08 cap for plug, pressure watertight 09 shell-material plastic (not watertight) 2 marine bronze (CW307G) 3 titanium 3 with fastening strap shell size 0-7 Katalog BR 40 Stand doc Seite / page - 8 -

8 SHELL SIZE / CONTACT ARRANGEMENT shell size 0 0 contact contact 04 contacts 0 contacts 08 contacts 2 contacts 7 9 contacts contacts contacts Numbering system plug backview Plugs and receptacles/cable connecting receptacles can be fitted with dummies, electrical- or fibre optic contacts. REFERENCE SYSTEM CONTACTS series contact multimode 0 singlemode electrical 2 dummy 3 locating tube dummy contact 0 electrical contact Ø 2 mm, max. 30 V/25 A (wire size AWG / 50 mm in length) 200 electrical contact Ø mm, max. 000 V/8 A (wire size AWG 20 / 50 mm in length) 30 standard-fibre Ø 25 µm electrical and dummy contact for plug electrical and dummy contact for receptacle fibre optic contact insert for (plug and receptacle identical) sparepart only! fibre optic contact for receptacle fibre optic contact for plug fibre optic contact for receptacle for rearside pressure fibre optic contact for plug for rearside pressure ATTENTION: Please quote following fibre cable Ø additional to contact part number: e.g.: 50 / 25 / 250 / 900 Ø µm Ø µm Ø µm Ø µm Core fibre coating buffer SUGGESTIONS FOR MATING OF PLUGS: - The connectors must be free of dirt and foreign matter. Check that locking sleeve moves freely. - Lightly grease the locking threads of the receptacle and the through bulkhead receptacle. - Insert the plug into the receptacle or bulkhead. Rotate until the keyway locks into position. Guide the plug through and turn the locking sleeve. - Tighten the locking sleeve with the corresponding wrench. Katalog BR 40 Stand doc Seite / page - 9 -

9 JAM NUT RECEPTACLE E F J max.8 pressure side ØB ØA 4,5 5,5 (4x) (4x) ØH ØC mounting hole SW D size contactarrangement Ø A Ø B Ø C +0,05 SW D E F H J 0 contact M23,5x , 0 contact M32x , contacts M3x ,2 0 3 contacts M39x , contacts M50x , contacts M0x, , contacts M80x, ,2 5 FLANGE RECEPTACLE E J L M F bore-circle ØK ØB ØA ØC mounting hole pressure side Ø,4 ØH size 0 with 4 mounting holes Ø 5,4 (4x90 ) 4x90 (size 0) x0 size contactarrangement A Ø B Ø C ±0,05 E F Ø H J K L M 0 contact M23,5x , ,5,4 3,4 contact M32x ,5 5 30, ,9 3,4 2 4 contacts M3x ,5 5 3, ,9 3,4 3 contacts M39x ,5 5 40, ,9 3,4 4 8 contacts M50x ,5 5 52, ,9 3,4 5 2 contacts M0x ,5 5 59, ,9 3,4 7 9 contacts M80x, , ,4 3,4 Katalog BR 40 Stand doc Seite / page - 0 -

10 CABLE CONNECTING RECEPTACLE E F H SW D ØB ØA size contact arrangement Ø A Ø B SW D E F H 0 contact M23,5x ,5 0 contact M32x , contacts M3x ,5 0 3 contacts M39x , contacts M50x , contacts M0x, , contacts M80x, ,5 5 5 OUTBOARD PLUG E D ØA ØC ØB size contact arrangement Ø A Ø B Ø C D E 0 contact M9x0,5 29,, ,5 contact M27x0, contact M27x0,5 44, contact M35x0, contact M45x0, contact M54x ,5 7 9 contacts M 8x Katalog BR 40 Stand doc Seite / page - -

11 ENDBELL D E ØA ØB ØC ØC 2 size contactarrangement A max. cable B min. Ø C min. C 2 min. D ca. E 0 contact contact contacts contacts contacts contacts contacts Katalog BR 40 Stand doc Seite / page - 2 -

12 SEALING / PROTECTING CAPS OUTBOARD CONNECTORS SEALING CAP for receptacle Ø A B SEALING CAP for plug Ø A B Ø C PLASTIC PROTECTING CAP (not pressure watertight) for receptacle ØA B PLASTIC PROTECTING CAP (not pressure watertight) for plug Ø A B C Size ØA B Part No. 0 29, 34, , ,5 34, , , , Size Ø A B C Part No M23,5x M32x M3x M39x M50x M0x, M80x, Size Ø A B Part No Size Ø A B C Part No. 0 30, Katalog BR 40 Stand doc Seite / page - 3 -