BTS GmbH. Postfach 1262 D Saarburg Max-Planck-Str. 1 D Saarburg
|
|
- Josephine Chambers
- 7 years ago
- Views:
Transcription
1 BTS GmbH Postfach 1262 D Saarburg Max-Planck-Str. 1 D Saarburg Tel.: 0049 (0) Sales: 0049 (0) Fax: 0049 (0) info@bts-saarburg.de Internet:
2
3
4
5
6
7
8
9
10
11
12 Our Beam Clamps type TK and TKN can be fixed in both directions, set screw on the load side and set screw opposite the load side. Please check our installation instruction for further information.
13
14
15 The Purlin Clips enable the suspension of building services from Z purlins.
16 PACKING: MATERIAL: DIMENSIONS: 100 pcs./box Steel, zinc plated acc. DIN EN ISO 4042, other surfaces on request The above mentioned dimensions are indicate only. They correspond to the average allowed during the production process.
17 PACKING: Material: DIMENSIONS: 100 pcs/box and 400 pcs/master box Steel min. 130 HB, zinc plated acc. to DIN EN ISO 4042, hot dip galvanised, other surfaces on request Stainless steel A4, pickeled, passivated; Aluminium (on request) The above mentioned dimensions are indicate only. They correspond to the average allowed during the production process. Ultimate Load Channel Nuts and Hammer Head Bolts Ultimate load for BTS Channel Nuts and BTS Hammer Head Bolts made of steel and stainless steel for channels 41 x in combination with threaded rod 4.6 and static load The ultimate load of the channels has to be considered. BTS can not give you any guaranty for the channels which are used by the customer.
18 Head dimension and Information about ultimate load for Hammer Head Bolts you will find on the page I Channel Nuts for channels 41x MATERIAL: DIMENSIONS: Steel min. 130 HB, zinc plated acc. to DIN EN ISO 4042, other surfaces on request Stainless steel A4 pickeled, passivated The above mentioned dimensions are indicate only. They correspond to the average allowed during the production process.
19 or according to customers samples or drawings with or without heax head nut DIN 934 and washer Hook Head Bolts Type: 40/22 50/30 72/48 or according to customers samples or drawings with or without heax head nut DIN 934 and washer Material: PACKING: Steel 4.6 or 8.8 zinc plated acc. to DIN EN ISO 4042 or hot dip galvanized Stainless steel A 2 or A 4, pickeled, passivated Commercial standard or according to customers request
20 Washers PACKING: MATERIAL: Wedge Nuts PACKING: Material: DIMENSIONS: 100 pcs/box and 600 pcs/master box Steel min. 130 HB, zinc plated acc. to DIN EN ISO 4042, other surfaces on request. Stainless steel A4 pickeled, passivated 100 pcs/master box Steel min. 130 HB, zinc plated, acc. to DIN EN ISO 4042, other surfaces on request The above mentioned dimensions are indicate only. They correspond to the average allowed during the production process.
21 Eye Nut AO 700 AO 701 AO 702 height approx. mm hole Ø approx. mm thread M 6 M 6 / M 8 M 6 / M 8 / M 10 packing unit 100 pcs. 50 pcs. 50 pcs. Hook AH 710 AH 711 height approx. mm hole Ø approx. mm thread M 6 / M 8 M 6 / M 8 packing unit 100 pcs. 100 pcs. Eye Nut BO 716 BO 718 height x width approx. mm 40 x x 24 hole Ø approx. mm 9 12 thread M6 / M8 M6 / M8 / M10 / M12 packing unit 100 pcs. 50 pcs.
22
23
24 - Spikes completely formed out as per DIN 1052, which is only possible due to production with natural sand in our foundry - Final check for cracks or missing spikes during bundling - High precision of the inner bore simplifying work and saving time during installation - Certificate 2.1 as per EN upon request - Made in Germany - CE - certificate can be downloaded on our website
25 Contact Sales department: Markus Becker Tel.: m.becker@bts-saarburg.de Languages: German/English/French/Italian Anastasia Onufrieva Tel.: a.onufrieva@bts-saarburg.de Languages: German/English/French/Russian Timo Thinnes David Weber Tel.: t.thinnes@bts-saarburg.de Languages: German/English Tel.: d.weber@bts-saarburg.de Languages: German/English Offers for refinishing: Werner Linster Tel.: w.linster@bts-saarburg.de Languages: German/English Purchasing department: Achim Hildebrand Tel. : a.hildebrand@bts-saarburg.de Languages: German/English Finance and Human Resources: Renate Klasen Tel. : r.klasen@bts-saarburg.de Languages: German/English Commercial management: Friedbert Theis Tel. : f.theis@bts-saarburg.de Languages: German/English Transport management: Alexandra Fenes Tel. : a.fenes@bts-saarburg.de Languages: German/English
26
27 How to find us B 51 from Trier B 51 from Mettlach
28 Edition: July 2014
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationHow to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationPRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationFlamco Stainless steel mountings
S TA I N L E S S S T E E L M O U N T I N G S 9 Flamco Stainless steel mountings BRS-A BSF - SS RAIL R - SS GP - SS Edition 2007 / UK Stainless steel mountings Flamco offers the best attachment options
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationHSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationMultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationSolar Mounting Catalogue
Solar Mounting Catalogue Tile roof, metal sheet roof, flat roof, whatever type of your roof is, we can supply you all rooftop mounting solutions. With high quality of anodized aluminium and galvanized
More informationGK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
More informationWOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationvalid as of 1 April 2014 Fradiflex metal water stop
FRANK Product List valid as of 1 April 2014 Fradiflex metal water stop Fradiflex metal water stop Stremafl ex Controlled crack component Sealing of joints in concrete structures requires a very reliable
More informationNarrow stile lock 1314
3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationData Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
More informationInstallation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale
Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationINSTRUCTIONS FOR USE
2/2013 ANCHOR BOLTS INSTRUCTIONS FOR USE - Threaded rebars ATP, AHP, AJP - Threaded high strength steel bolts ALP-L, ALP-P, AMP ATP AHP ALP-L ALP-P AMP Eurocode design according to EN1993-1-8 (2005) &
More informationCABLE SUPPORT SYSTEMS
CABLE SUPPORT SYSTEMS eaturing the CADDY CAT HP J-Hook System Why CADDY CAT HP? Why Choose CADDY CAT HP over tray? ast and Easy to Install Much faster installation compared to conventional cable or ladder
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationfor HACA fixed two-rail ladders with / without rear safety guard and fall arrest system
Instructions for assembly and use for HACA fixed two-rail ladders with / without rear safety guard and fall arrest system Englisch Please read before assembling! Caution: incorrect assembly can lead to
More informationHilti HIT-V and HAS Threaded Rod and Hilti HIT-Z Anchor Rod
, Monday, HAS March and HIT-Z 24, 2014 Hilti Rod Specifications and Technical Data Hilti and HAS Threaded Rod and Hilti HIT-Z Rod Specifications and Technical Data Hilti has provided threaded rod for many
More informationFilter Housing SG Standard
Page of 7 Filter Housing SG Standard The steel standard filter housings with econometer and pneumatic drain are designed for the purification of compressed air and gases. Due to the modular design of the
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationHLC A1... HLC B1... HLC F1... Data Sheet. Load cells. Special features. B2325-1.0 en
HLC B1... HLC F1... HLC A1... HLC B1... HLC F1... Load cells Special features -- Hermetically sealed (IP68) -- Max. capacities: 220 kg... 10 t -- Stainless steel -- Low overall height -- Meets EMC/ESD
More informationFeed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationDIVISIÓN DE ESTRUCTURAS ÁREA INDUSTRIAL- ÁREA ENERGÍA SOLAR
HIASA has supplied more than 430 Mw of Photovoltaic System on the world. The Photovoltaic Systems are designed 100% by HIASA according to the countries standards. Single axis tracker is formed by a group
More informationAll Weather Hall. Efficient, multipurpose & quick to build
All Weather Hall Efficient, multipurpose & quick to build ALL WEATHER HALL www.deboer.com www.deboer.com ALL WEATHER HALL A flexible solution for a multitude of needs All Weather halls from De Boer provide
More informationMetal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
More informationWELAND TERMINOLOGY LOAD BEARING BAR CROSS BAR GRATING TYPE SAF MESH OPENING GRATING. LENGTH, SPAN WIDTH or LENGTH OF LOAD BAR GRATING
GRATING Page Terminology 6-7 Pedestrian Walkway Multipanels from Stock 8-13 Duckboard 13 Vehicular Multipanels with Load Tables 14-15 Kerb Angle Frames 16-17 Entrance Mats 18-20 Special Grating 22 Mesh
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationEuropean Technical Assessment ETA-10/0153 of 10/06/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationPITCHED ROOF STRUCTURES
PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system
More informationwww.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet C-Flow Coriolis Mass Flow Meter Description The coriolis mass flow meters measure simultaneously mass
More informationProduct Catalogue HW-B150H
Product Catalogue Content 1 Coverage and Terminology... 4 1.1 Design Standards... 4 1.2 Load Criteria... 5 1.3 Definition of Terms... 6 1.3.1 Flood Barrier... 6 1.3.2 Flood Height, effective Flood Height,
More informationINSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More information7Čå.e.279(1Ì HEAVY DUTY ANCHOR
HEAVY DUTY ANCHOR HEAVY DUTY ANCHOR - HOW TO CHOOSE Produkt Product ETA ETA Strana Page Beton Concrete Cracked concrete Kámen Stone Plná cihla Solid brick Hollow brick bloky Hollow concrete block / Heavy
More informationALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
More informationPermanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions
ABS-Lock X / X - SR Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions The ABS-Lock X system was developed to provide both a secure single anchorage point for
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationIncorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract
More informationLOAD-CARRYING CAPACITY OF AXIALLY LOADED RODS GLUED-IN PERPENDICULAR TO THE GRAIN
LOAD-CARRYING CAPACITY OF AXIALLY LOADED RODS GLUED-IN PERPENDICULAR TO TE GRAIN Prof. Dr.-Ing..J. Blaß, Dipl.-Ing. B. Laskewitz Universität Karlsruhe (T), Germany Abstract Glued-in rods have been used
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationDECLARATION OF PERFORMANCE
DECLARATION OF PERFORMANCE No. 010.007-CPR-2013.09.04 By JSK - Approved on behalf of the manufacturer by Lars Tvete, Vingrom 04.09.2013 Product name : Product specifications : Material / Surface treatment
More informationN8LED Large Area Lighting
INDUSTRIAL LIGHTS N8LED Large Area Lighting The N8LED (= NachtLED) is a mobile, energy efficient large area LED light and is specially designed to illuminate all construction and assembly sites in industry
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationDirect steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support system Duct suspensions & Support systems lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Threaded rod OSB 0... Channels
More informationFAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
More information9. Direct screwing into plastics and metal
9. Direct screwing into plastics and metal 9.1 Direct screwing into plastics The use of plastics is gaining in importance through new application possibilities. Optimised thread pitch Advantages here are
More information7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME
7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved
More informationSchöck Isokorb type KST User Selection Guide. Schöck Isokorb type KST Blindtext
Blindtext Schöck Isokorb type KST User Selection Guide Schöck Ltd 2-4 High Street Kidlington, Oxfordshire OX5 2DH Tel: 01865 290 890 Fax: 01865 290 899 E-mail: design@schoeck.co.uk Web: www.schoeck.co.uk
More informationHVU with HAS/HAS-E rod adhesive anchor
HVU with HAS/HAS-E rod HVU with HAS/HAS-E rod adhesive anchor Mortar system Benefits Hilti HVU foil capsule HAS HAS-R HAS-HCR rod - suitable for non-cracked concrete C 20/25 to C 50/60 - high loading capacity
More informationI-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationIsover HVAC Application Handbook Installing fire protection insulation to metal ductwork
Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork HVAC - Fire protection of metal ductwork Fire protection Thermal insulation Isover ULTIMATE TM Protect - Fire protection
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More informationBest Practice Guide to Cable Ladder and Cable Tray Systems
Best Practice Guide to Cable Ladder and Cable Tray Systems Channel Support Systems and other Associated Supports November 2012 BEAMA Best Practice Guide to Cable Ladder and Cable Tray Systems Including
More informationPHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
More informationRINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
More information200 m 17,0±0,5kg. Malzeme : Product Specs
İç Tel : Core Wire Malzeme : Product Specs Sac : Sheet Rulo Uzunluğu : Roll Lenght Ağırlık : Weight Ø2,5±0,001 mm ÇELİK TEL (çekme kuvveti ~ 160 kg/mm²/galvaniz oranı ~ 200g/m2) : Ø2,5±0,001 mm STEEL WIRE
More informationEmbedded Parts Introduction - Anchors
In the plant construction or process plants such as chemical, petrochemical, gas or power plants various disciplines are brought into contact and built on each other. Civil, mechanical, electro technical
More informationPreface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationInsulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Aluminum Electrolytic Capacitors Accessories Mounting Kits
Insulated Version M8 Stud (M12 Stud) Non-Insulated Version M8 Stud (M12 Stud) Dimensions in mm. All of the above accessories may be ordered individually using the part number shown or as kits using the
More informationShaking Water Baths THERMOLAB
Shaking Water Baths THERMOLAB "Precision in series" - a synonym for a specialised range of four Shaking Water Baths that are in use all over the world Quality built on Tradition Users in research labs,
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationMERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
More informationElectro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
More informationV80 HEAD DETAIL - SECTION VIEW DRAWING SCALE 1:2. Dwg. No. V10101. 13mm min. 85mm. 72mm 95mm 65mm. 26mm. 10mm 60mm 75mm. 135mm.
13mm min. 72mm 95mm 65mm 85mm 26mm 10mm 60mm 75mm 135mm 145mm V80 HEAD DETAIL - SECTION VIEW Dwg. No. V10101 Manually operated blind with gearbox showing 90 & 45 degree crank penetrations in section view.
More informationCat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationWT WR. Lateral compression reinforcements EN 1995-1-1. Data sheet No. 09 3.04. Convincing advantages:
EN 1995-1-1 Lateral compression reinforcements WT WR WT WR Convincing advantages: Data sheet No. 09 3.04 substantial increase in ability to absorb shearing pressure material savings: purlin dimensions
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationwww.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters
www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass
More informationPressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
More informationSERIES NG 1800 STRUCTURAL STEELWORK
MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationPV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY
PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.
More informationHARDWARE SHOP COMPLETE INVENTORY TOTAL VALUE: 514.197,88
1 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x10 700 4,69 2 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x16 100 1,3 3 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x20 400 3,88 4 Screw TE 8.8 T.F. galvanized
More informationEuropean Technical Approval ETA-10/0153
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationS OUNTING INSTRUCTION M M o u n t i n g k i t 2 &
M O U N T I N G I N S T R U C T I O N S instructions This document is protected by copyright. The SICK AG company retains this right. Reproducing this document in whole or part is only permissible within
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More information