Tool Corp. Threading. Vol. 1.1
|
|
- Angela Pierce
- 7 years ago
- Views:
Transcription
1 Tool Corp. Threading Vol. 1.1
2 Table of Contents: Imperial (Fractional) s: High Speed Steel Hand Taps Pages 3-5 General Purpose HSS Hand Taps Pages 3-4 Spiral Point HSS Hand Taps Page 4 Production Grade Pipe Taps Page 4 Spiral Fluted Point HSS Hand Taps Page 5 Combination Drill and Taps Page 5 Solid Carbide ThreadMills Page 6-7 UN (Unified Thread) ThreadMills Page 6 BSPP ThreadMills Page 7 BSPT ThreadMills Page 7 NPT ThreadMills Page 7 NPTF ThreadMills Page 7 Technical Information: Tap Drill Recommendations Page 8 Metric s: High Speed Steel Hand Taps Pages 9-11 General Purpose HSS Hand Taps Pages 9 Spiral Point HSS Hand Taps Page 9 Spiral Fluted Point HSS Hand Taps Page 10 Combination Drill and Taps Page 10 Solid Carbide ThreadMills Page 11 Standard Helical ThreadMills Page 11 Coolant Through ThreadMills Page Tel:
3 High Speed Steel Hand Taps Fractional All of our High Speed Steel Hand Taps are of the highest quality with a finish, ground threads, and right hand features. General Purpose HSS Hand Taps Limit Tapered Bottom Set of H T P B S 1 64 H T P B S 1 72 H T P B S 2 56 H T P B S 2 64 H T P B S 3 48 H T P B S 3 56 H T P B S 4 36 H T P B S 4 40 H T P B S 4 48 H T P B S 5 40 H T P B S 5 44 H T P B S 6 32 H T P B S 6 40 H T P B S 8 32 H T P B S 8 36 H T P B S H T P B S H T P B S H T P B S H T P B S 1/4 20 H T P B S 1/4 28 H T P B S 5/16 18 H T P B S 5/16 24 H T P B S 3/8 16 H T P B S 3/8 24 H T P B S 7/16 14 H T P B S 7/16 20 H T P B S 1/2 13 H T P B S 1/2 20 H T P B S 9/16 12 H T P B S 9/16 18 H T P B S 5/8 11 H T P B S 5/8 18 H T P B S 11/16 11 H T P B S 11/16 16 H T P B S 3/4 10 H T P B S 3/4 16 H T P B S 7/8 9 H T P B S 7/8 14 H T P B S 1 8 H T P B S 1 12 H T P B S 1 14 H T P B S Fax:
4 High Speed Steel Hand Taps General Purpose HSS Hand Taps (Cont.d) Fractional 1-1/8 7 H T P B S 1-1/8 12 H T P B S 1-1/4 7 H T P B S 1-1/4 12 H T P B S 1-3/8 6 H T P B S 1-3/8 12 H T P B S 1-1/2 6 H T P B S 1-1/2 12 H T P B S 2 Spiral Point 3 Spiral Point 2 HSS Spiral Point Hand Taps for use on Steel Limit 0 80 H H H H H H H H H H H H H H H H H H H H /4 20 H /4 28 H /16 18 H /16 24 H HSS Spiral Point Hand Taps for use on Steel Limit 3/8 16 H /8 24 H /16 14 H /16 20 H /2 13 H /2 20 H /16 12 H /16 18 H /8 11 H /8 18 H /4 10 H /4 16 H Production Grade Pipe Taps HSS Production Grade Pipe Hand Taps for Steel applications NPT NPTF 1/ F 1/ F 1/ F 3/ F 1/ F 3/ F / F 1-1/4 11-1/ F 1-1/2 11-1/ F / ~ 4 Tel:
5 High Speed Steel Hand Taps Spiral Fluted Point Taps HSS Spiral Fluted Hand Taps with Ground Threads for use on Steel Limit Bottom 3 48 H P B 4 40 H P B 5 40 H P B 6 32 H P B 8 32 H P B H P B H P B H P B 1/4 20 H P B 1/4 28 H P B 5/16 18 H P B 5/16 24 H P B 3/8 16 H P B 3/8 24 H P B 7/16 14 H P B 7/16 20 H P B 1/2 13 H P B 1/2 20 H P B Fractional Overall (OAL) of Square (Inches) Thread Drill Combination Drill and Taps HSS Combination Drill and Taps for Steel applications NC NF Overall Drill Drill Shank Diameter (SH) Square (Inches) Thread Square of Square Shank Dia /8 1/ /8 3/ /8 1/ /8 3/ /16 9/ /32 3/ /16 9/ /32 3/ / /16 3/ / /16 3/ /8 3/ /2 1/ /8 3/ /2 1/ /8 13/ /8 1/ /8 13/ /8 1/ /8 15/ /32 9/ /8 15/ /32 9/ / /2 17/ /32 5/ / /2 17/ /32 5/ / /32 11/ /16 3/ / /32 11/ /16 3/ / /8 13/ /16 7/ / /8 13/ /16 7/ / / /4 13/ / / /4 13/ / /16 1 1/ /8 7/ / /16 1 1/ /8 7/ Drill (Inches) Fax:
6 Fractional Solid Carbide ThreadMills Overall (OAL) Lenth of Cut (LOC) Shank Diameter (SH) Cutting Diameter (DIA) UN (Unified Thread) ThreadMills Helical Multi-Helix x7/32x1/8x x1/4x1/8x x1/4x1/8x x5/16x3/16x x5/16x3/16x / x1/2x3/16x2-1/ / x1/2x3/16x2-1/ / x5/8x1/4x2-1/ / x5/8x1/4x2-1/ / x3/4x5/16x / x3/4x5/16x / x7/8x3/8x / x7/8x3/8x / x7/8x3/8x3-1/ / x7/8x3/8x3-1/ / x7/8x1/2x3-1/ / x7/8x1/2x3-1/ / x1-1/4x1/2x3-1/ / x1-1/4x1/2x3-1/ / x1-1/4x1/2x3-1/ / x1-1/4x1/2x3-1/ / x1-1/4x1/2x3-1/ / x1-1/4x5/8x3-1/ / x1-1/4x5/8x3-1/ x1-3/8x3/4x x1-3/8x3/4x Coating options: is Mastercut Tool Corp s new proprietary coating that surpasses the proven performance of AlTiN for superior extreme machining results. With a thermal stability above 1,600 F (900 C) this coating excels in high speed dry machining applications. Harder than our original AlTiN by 1000 HV, with an increase in thermal stability of 200 F (100 C), will ensure that heat buildup, friction, and edge breakdown are all greatly reduced, resulting in better cutting performance and longer tool life. As with it s predecessor, will be an excellent coating for applications involving tough-to-cut tool steels, stainless, cast iron and non-ferrous material, and it can also be used very effectively for interrupted cuts. can be run at more aggressive speeds and feeds than other coatings, and can be run without coolant in specific applications. continues to be the coating of choice for tough-to-cut materials. Hardness: 3800 HV, Coating Thickness: 2-4 Microns, Thermal Stability: 1,650 F or 900 C. 6 Tel:
7 Solid Carbide ThreadMills Fractional BSPP ThreadMills Helical Multi-Helix 1/16, 1/ x.572x1/4x2-1/ / x.737x5/16x / x1.143x1/2x3-1/ x1.546x5/8x BSPT ThreadMills Helical Multi-Helix 1/16, 1/ x.401x1/4x2-1/ / x.578x5/16x / x.785x1/2x3-1/ x1.546x5/8x NPT ThreadMills Helical Multi-Helix 1/ x7/16x1/4x2-1/ / x7/16x5/16x2-1/ / x5/8x3/8x / x5/8x3/8x / x7/8x1/2x3-1/ / x7/8x1/2x3-1/ x1-1/8x3/4x NPTF ThreadMills Helical Multi-Helix 1/ x7/16x1/4x2-1/ / x7/16x5/16x2-1/ / x5/8x3/8x / x5/8x3/8x / x7/8x1/2x3-1/ / x7/8x1/2x3-1/ x1-1/8x3/4x Fax:
8 8 Technical Information Tap Drill Recommendations Fractional s Metric s Drill Dec. Equiv / / / /16 18 F /16 24 I /8 16 5/ /8 24 Q /16 14 U / / / / / / / / / / / / / / / / / / / / / / /8 9 49/ / / / / / /8 7 63/ / / / / / / / / / / / / / / Drill Dec. Equiv (inches) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M Pipe Tap s Tel: Without Reamer Drill With Reamer 1/16 27 C (.242) A (.234) 1/8 27 Q (.332) 21/64 1/4 18 7/16 27/64 3/8 18 9/16 9/16 1/ /64 11/16 3/ /32 57/ /2 1-9/64 1-1/8 1-1/4 11-1/2 1-31/ /32 1-1/2 11-1/2 1-23/ / /2 2-3/ /64
9 Metric High Speed Steel Hand Taps Metric General Purpose HSS Hand Taps (MM) Limit Tapered Bottom Set of 3 M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S M D T P B S 2 Spiral Point 3 Spiral Point 2 HSS Spiral Point Hand Taps for use on Steel (MM) Limit M D M D M D M D M D M D M D M D M D HSS Spiral Point Hand Taps for use on Steel Fax: (MM) Limit M D M D M D M D M D M D
10 Metric Metric High Speed Steel Hand Taps Spiral Fluted Point Taps HSS Spiral Fluted Hand Taps with Ground Threads for use on Steel Limit Bottom M D P B M D P B M D P B M D P B M D P B M D P B M D P B M D P B Overall (OAL) of Square (Inches) Thread Drill Shank Diameter (SH) Drill (Inches) Square (Inches) Combination Drill and Taps HSS Combination Drill and Taps for Steel applications (MM) Overall Drill Drill Thread Square of Square Shank Dia 2 M /8 3/ /2 1/ M /8 13/ /8 1/ M /2 17/ /32 5/ M /32 11/ /16 3/ M / / M /16 1 1/ /8 7/ Tel:
11 Metric Solid Carbide ThreadMills Metric Standard Helical ThreadMills (MM) Helical M x8.4x4x M x10.4x4x M x12x4x M x16x6x M x16x6x M x16.25x6x M x20x8x M x21x8x M x24x10x M x24x10x M x24.5x10x M x28.5x12x M x32x12x M x40x16x M20, M x42x16x Coolant Through ThreadMills (MM) Single Hole Straight Multi-Hole Side M x13x6x M x17.5x6x M x17.5x6x M x17.5x6x M x21x8x M x21x8x M x24x10x M x26.25x10x M x26.25x10x M x34x12x M x34x12x M x40x16x M20, M x42x16x Num. of Holes Coating options: is Mastercut Tool Corp s new proprietary coating that surpasses the proven performance of AlTiN for superior extreme machining results. With a thermal stability above 1,600 F (900 C) this coating excels in high speed dry machining applications. Harder than our original AlTiN by 1000 HV, with an increase in thermal stability of 200 F (100 C), will ensure that heat buildup, friction, and edge breakdown are all greatly reduced, resulting in better cutting performance and longer tool life. As with it s predecessor, will be an excellent coating for applications involving tough-to-cut tool steels, stainless, cast iron and non-ferrous material, and it can also be used very effectively for interrupted cuts. can be run at more aggressive speeds and feeds than other coatings, and can be run without coolant in specific applications. continues to be the coating of choice for tough-to-cut materials. Hardness: 3800 HV, Coating Thickness: 2-4 Microns, Thermal Stability: 1,650 F or 900 C. Fax:
12 Don t Forget to Check Out All That Mastercut Has to Offer Mastercut Tool Corp. offers a full line of solid carbide cutting tools, both standards and special requests. Whether you are cutting wood, exotic metals, acrylic, or any other material, Mastercut has an ideal solution for all of your cutting tool needs. We can also sharpen your dull cutters, regardless of manufacturer. Call or us for more information. American Made, World Class Quality Wholesale and Dealer Discounts Available Proudly distributed by: Mastercut Tool Corp. 965 F. Harbor Lake Drive Safety Harbor, FL USA Telephone (727) Fax (727) sales@mastercuttool.com Tel: MFU-Vol-1.1
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationPROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationCNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
More informationCharts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
More information172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationNEW INTERCHANGEABLE REAMING HEAD SYSTEM FAST
August 2007 / NEW029.1 / PAGE 1 OF 7 NEW INTERCHANGEABLE REAMING HEA YTEM FAT ACCURATE GOO FINIH Ingersoll is introducing the QwikReam, a new high speed reaming system. The QwikReam consists of an interchangeable
More informationThree Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationModule 3 Machinability. Version 2 ME, IIT Kharagpur
Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development
More informationcomprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationPipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationCUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationWorking Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationStraight shank twist drills. Jobber drills. Jobber drills. DIN 338 GT 100 lh 1,300-10,200. DIN 338 N 2,36 lh 0,360-20,000. DIN 338 N lh 0,250-14,250
Jobber drills Jobber drills HSS 205 HSS 2456 DIN 338 N 2,36 rh 0,200-20,000 DIN 338 N rh 1,000-16,000 HSS 206 HSS 2457 DIN 338 H rh 0,200-20,000 DIN 338 GT 100 rh 1,000-15,000 HSS 207 HSCO 305 DIN 338
More informationPRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationThread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationMilling. COPYRIGHT 2008, Seco Tools AB 1/111
Milling 1/111 2/111 Milling A simple choice! Experts required? No Just follow some basic rules. 3/111 Face milling 4/111 Square shoulder milling 5/111 Disc milling 6/111 Copy milling 7/111 Plunge milling
More informationSummary of Insert Grades. Insert Lineup Turning Milling Drilling Insert Selection Table Grade Properties PCD CBN. Ceramic. Cell Fiber. Cermet.
1~15 Summary of Insert Lineup Milling Drilling Insert Selection Table Grade Properties PCD Ceramic Cell Fiber PVD Coated CVD Coated PVD Coated for PVD Coated for Milling and Drilling 2~7 2~3 4 5 5 6 7
More informationThis last dimension, the thread pitch diameter, is the most important as it is a reference from which all other thread measurements originate
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the design and use of various thread types and how they are produced.
More informationBonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
More informationHow To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
More informationNew cutting tools from Sandvik Coromant
Supplement to Main Catalogue 2006 New cutting tools from Sandvik Coromant TURNING - MILLING - DRILLING - ORING - TOOLHOLDING CoroPak 2006.1 790 new products introduced! No compromise! With the new generation
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationInno vation. Parting and grooving program HX Heavy duty machining - stability & process security
Inno vation Parting and grooving program HX Heavy duty machining - stability & process security EN Application - customer benefi ts Industries Power generation, turbine construction oll production Wind
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationGrade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics...
Products Grade Selection... Coated / CVD... Coated / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Uncoated Cemented Carbides... Ultra fine Grain Cemented Carbides... -2-4 -6-8 -0-2 - -4-5
More informationMACHINING OPERATIONS AND MACHINE TOOLS
MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and
More informationTurbine blade machining. Intelligent tooling solutions cutting your costs
Turbine blade machining Intelligent tooling solutions cutting your costs Your innovative partner We aim at improving the competitiveness of our customers by reducing the unit costs in the cutting processes.
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationGear Cutting Tools. Hobbing Gear Milling. Leitz Metalworking Technology Group
Gear Cutting Tools Hobbing Gear Milling Leitz Metalworking Technology Group Important information Important information 4 Services 5 An introduction to FETTE 6 Page Important information Product range
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationMETALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
More informationAbrasive Products for Grinding and Finishing of Hard Coatings
3 Abrasive Products for Grinding and Finishing of Hard Coatings Application Guide Life after chrome: It s not the same old grind. Increasing restrictions on the use of hexavalent chrome have hastened the
More informationTechnical Information
tapping Technical Information Troubleshooting Guide 115 TAP DOES NOT START Program depth: Tap drill size: Tap sharpness: Compression stroke may use up the entire program depth. Check for tap drill size.
More informationDRILLING MACHINES GENERAL INFORMATION
Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationVARDEX. Vardex Advanced Threading Solutions. Thread Milling. Thread Turning
VA R D E X I n d u s t r i a l S o l u t i o n s 2011-2012 METRIC VARDEX Vardex Advanced Threading Solutions VARGUS Ltd. is a world leading developer, manufacturer and supplier of high-quality, precision
More informationBrackets and Tenons. Product Specifications. PB Series
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
More informationTUBULAR Holing and Slotting Of Casing
TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA
More informationMeet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
More informationIcon Glossary. Icon Glossary. Technical Information N N. Number of Flutes. Center Cutting. Lengths. Coatings. Helix Angle. Ball Nose.
Icon Glossary Z3 Number of Flutes aterial Center Cutting Coatings Lengths Iron pecial Icon Glossary ALtima TiAlN TiCN TiN Fordlube Hardened (35-65Rc) 30 Helix Angle Ball Nose Non-Ferrous N N Neck Relief
More informationApplication Material Guide (AMG) Chart found on back cover 1-800-877-3745
Application Material Guide (AMG) Chart found on back cover Precision Dormer has expanded its range of high performance drills with the new. Manufactured with productivity and performance in mind, the HYDRA
More informationTHE ORIGINAL UNI-LOC PIN INSTALLATION PROCEDURE 321D REV03 5/19/08
THE ORIGINAL UNI-LO PIN INSTALLATION PROEDURE 321D 03 5/19/08 1 UNI-LO Pins are best installed during the latter stage of finishing the butt. It is suggested to maintain less than.002 run-out in the front
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationTurbine blade machining Intelligent tooling solutions cutting your costs...
Turbine blade machining Intelligent tooling solutions cutting your costs... www.unimerco.com Tooling solutions for turbine blades Your innovative partner We aim at improving the competitiveness of our
More informationARMSTRONG MOLD GRAPHITE DIE CASTING DIVISION
ARMSTRONG MOLD CORPORATION GRAPHITE DIE CASTING DIVISION Getting Started The Evolution of GDC The GDC technology was developed as a hybrid of traditional permanent mold, graphite mold and the die casting
More informationRotabroach. Products and Accessories WWW.HOUGEN.COM
Rotabroach Industrial Products and Accessories WWW.HOUGEN.COM take control of your toughest production applications Rotabroach - The Energy Saver Rotabroach Cutters require far less horsepower than twist
More information08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
More informationBritish Standard Pipe BSP
British Standard Pipe BSP BSP pipe, Like American National pipe (NPT, NPSM), is designated by trade size, rather than actual diameter, which is approximately equal to the thread's Major Diameter in the
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More informationHow To Design A 3D Print In Metal
DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS
More informationGM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationAlfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
More informationProduct Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
More informationLenntech. 1000 psi End port pressure vessels 2.5. User s Guide to: Phoenix Vessel Technology Limited. Model number: 1503
1 User s Guide to: Phoenix Vessel Technology Limited 1000 psi End port pressure vessels 2.5. Model number: 1503 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Phoenix
More informationYour technology partner for machining INNOVATIONS 2015
Your technology partner for machining INNOVATIONS 2015 When something exceptional develops between us: That's the MAPAL effect. You do not want to do everything differently. But many things better. Opening
More informationMueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationTECHNICAL MEMORANDUM SUMMARY REPORT:
Texas Transportation Institute The Texas A&M University System 3135 TAMU College Station, TX 77843-3135 979-845-6375 Fax: 979-845-6107 http://tti.tamu.edu TECHNICAL MEMORANDUM Contract No.: T4541-AO Test
More informationStatic and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
More informationVCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationUDDEHOLM ELMAX SUPERCLEAN
UDDEHOLM ELMAX SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationChapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
More informationSecolor Selection Guide. User s Manual. 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN
Secolor Selection Guide User s Manual 2007-11-21 Seco Business Solutions SECO TOOLS AB, SWEDEN 1 INTRODUCTION...3 2 FEATURES...3 2.1 SEARCH FUNCTIONALITY...4 2.1.1 ISO / ANSI...4 2.1.2 Insert designation...4
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More informationUp to Speed. When considering a modern CNC. Spindle speeders allow micromachining on lower-rpm machines
Up to Speed Spindle speeders allow micromachining on lower-rpm machines By Gerard Vacio, BIG Kaiser Precision Tooling Inc. As cutting tool manufacturers increase the recommended operating conditions for
More informationInvoMilling AGILE GEAR MANUFACTURING
InvoMilling AGILE GEAR MANUFACTURING Cutting lead times in gear manufacturing Machining gears normally requires dedicated tools for the specific gear profile. With the patented InvoMilling process it is
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationNIMS Machining Level I Preparation Guide. Milling
NIMS Machining Level I Preparation Guide Milling Table of Contents Overview page 2-5 Introduction page 2 Who Wrote the Questions page 2 How to Prepare for the Credentialing Exam page 3 Areas of Knowledge
More informationPresentation on CNC MACHINES. By: Hafiz Muhammad Rizwan
Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters
More informationGEOMETRY OF SINGLE POINT TURNING TOOLS
GEOMETRY OF SINGLE POINT TURNING TOOLS LEARNING OBJECTIVES Introduction to Features of single point cutting tool. Concept of rake and clearance angle and its importance System of description of Tool geometry
More informationUDDEHOLM BALDER UDDEHOLM BALDER UDDEHOLM STEEL FOR INDEXABLE INSERT CUTTING TOOLS
UDDEHOLM BALDER Reliable and efficient steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be considered,
More informationSection V Removing Frozen or Broken Fasteners & Taps
154 CHAPTER 6 THREADS & THREADING Section V Removing Frozen or Broken Fasteners & Taps Frozen or Broken Fastener Removal What are the common methods for removing frozen or broken threaded fasteners? Here
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More information