Straight shank twist drills. Jobber drills. Jobber drills. DIN 338 GT 100 lh 1,300-10,200. DIN 338 N 2,36 lh 0,360-20,000. DIN 338 N lh 0,250-14,250
|
|
|
- Kerry Gibson
- 7 years ago
- Views:
Transcription
1 Jobber drills Jobber drills HSS 205 HSS 2456 DIN 338 N 2,36 rh 0,200-20,000 DIN 338 N rh 1,000-16,000 HSS 206 HSS 2457 DIN 338 H rh 0,200-20,000 DIN 338 GT 100 rh 1,000-15,000 HSS 207 HSCO 305 DIN 338 W rh 0,200-20,000 DIN 338 N 2,36 rh 0,200-20,000 HSS 208 HSCO 308 DIN 338 N 2,36 lh 0,200-20,000 DIN 338 N 2,36 lh 0,360-20,000 HSS 209 HSCO 605 DIN 338 H lh 0,300-20,000 DIN 338 Ti rh 0,200-19,000 HSS 210 HSCO 608 DIN 338 W lh 0,250-20,000 DIN 338 Ti lh 1,000-9,500 HSS 240 HSCO 622 DIN 338 N rh 3,000-16,000 DIN 338 GT 100 2,36 rh 1,000-16,000 HSS 549 HSCO 657 DIN 338 GT 100 2,36 rh 0,600-16,000 DIN 338 Ti rh 0,500-14,500 HSS 550 HSCO 658 DIN 338 GT 100 2,36 lh 1,000-16,000 DIN 338 GT 100 rh 1,000-16,000 HSS 560 HSCO 1221 DIN 338 N rh 2,370-5,610 DIN 338 GT 100 rh 3,000-12,000 HSS 651 HSCO 1223 DIN 338 N rh 0,200-19,500 DIN 338 GT 100 rh 3,000-12,000 HSS 652 HSCO 1260 DIN 338 GT 100 rh 1,000-16,000 DIN 338 VA rh 1,000-13,000 HSS 664 HSCO 2047 DIN 338 N lh 0,250-14,250 DIN 338 P2000 rh 1,000-13,000 HSS 665 HSCO 2458 DIN 338 GT 100 lh 1,300-10,200 DIN 338 Ti rh 0,400-15, GUHRING and its products
2 Jobber drills Stub drills HSCO 2459 HSS 553 DIN 338 GT 100 rh 1,000-16,000 <Ø DIN 1897 GT 80 2,36 16,0 lh 1,000-20,000 HSCO 2997 HSS 653 DIN 338 N rh 1,000-14,500 DIN 1897 N rh 0,500-30,160 M HSS 672 DIN 338 N rh 0,500-16,000 DIN 1897 N lh 0,900-16,000 Carbide 710 HSS 2460 std. Duro 150 rh 3,000-14,000 DIN 1897 N rh 1,000-16, HSCO 329 std. N rh 1,000-12,000 DIN 1897 GV 120 2,36 rh 0,400-48, HSCO 330 std. N rh 1,000-12,000 DIN 1897 GV 120 2,36 lh 0,450-35,000 Stub drills HSCO 659 DIN 1897 GV 120 rh 0,500-15,500 HSS 223 HSCO 1228 DIN 1897 N 2,36 rh 0,350-48,000 DIN 1897 GT 80 rh 1,000-20,000 HSS 224 HSCO 1261 DIN 1897 H rh 0,690-22,000 DIN 1897 VA rh 1,000-12,000 HSS 225 HSCO 2048 DIN 1897 W rh 1,000-22,000 DIN 1897 P2000 rh 1,000-13,000 HSS 226 HSCO 2461 DIN 1897 N 2,36 lh 0,320-50,000 DIN 1897 GV 120 rh 1,000-20,000 HSS 227 HSCO 2498 DIN 1897 H lh 0,750-24,000 DIN 1897 GT 80 rh 1,000-16,000 HSS 228 M DIN 1897 W lh 1,000-20,000 DIN 1897 N rh 1,000-15,870 HSS <Ø DIN 1897 GT 80 2,36 16,0 rh 1,000-20,000 DIN 1897 GT 500 rh 1,000-14,000 GUHRING and its products 27
3 Stub drills Twist drills with oversize straight shank 730 HSCO 511 DIN 6539 N rh 0,500-16,000 std. GU 500 rh 2,000-20, DIN 6539 N rh 1,000-16,000 std. N rh 0,500-6, DIN 6537 K H rh 3,000-12,000 Jobber drills with 12.7 mm dia. shank 709 HSS 268 std. N rh 2,820-11,910 std. N rh 13,000-31,750 Set of jobber drills Stub drills with 16.0 mm dia. shank HSS/ HSCO 200 HSCO 128 DIN 338 N rh - std. N rh 16,000-40,000 Set of jobber drills in case Stub drills with 25.4 mm dia. shank HSCO 195 HSCO 129 DIN 338 VA rh - std. N rh 25,000-40,000 HSS/ HSCO 201 HSCO 136 DIN 338 N rh - std. N lh 25,000-39,000 DIN 338 P2000 rh - HSCO NC-spotting drills HSCO 2050 HSS 557 DIN 1897 P2000 rh - std. N rh 2,950-25,400 Twist drills with oversize straight shank HSS 568 std. N rh 3,000-25,400 HSCO std. GU 500 rh 2,000-20,000 std. N rh 5,000-20, HSS 559 std. GT 500 rh 2,000-13,000 std. N rh 6,350-25, GUHRING and its products
4 120 NC-spotting drills Micro-precision drills with oil feed HSS std. N rh 3,000-25,400 std. N rh 1,400-3,000 HSS std. N rh 3,000-25,400 std. N rh 1,400-3, std. N rh 5,000-20, NC-spotting drills std. N rh 4,000-20, Long series twist drills Straight shank drills double-ended HSS 204 DIN 340 N rh 2,950-25,250 HSS 554 HSS 217 std. DK 77 2,36 rh 1,500-10,500 DIN 340 N 2,36 rh 0,400-36,510 Micro-precision drills without oil feed HSS 218 DIN 340 H rh 0,500-18, HSS 219 DIN 1899 N rh 0,050-1,920 DIN 340 W rh 0,400-20, HSS 220 DIN 1899 N lh 0,130-1,945 DIN 340 N 2,36 lh 0,450-29, HSS 221 DIN 1899 N rh 0,128-1,900 DIN 340 H lh 0,430-15, HSS 501 std. N rh 0,200-1,400 DIN 340 GT50 rh 1,000-14, HSS 506 std. N rh 0,800-3,000 DIN 340 GT 100 2,36 lh 1,400-13, HSS 535 std. N rh 0,800-3,000 DIN 340 GT 100 2,36 rh 1,000-14,000 GUHRING and its products 29
5 Long series twist drills Extra length twist drills, series 1 HSS 667 HSCO 618 DIN 340 N rh 0,500-22,220 DIN 1869 GT 100 rh 2,700-10,000 HSS 668 DIN 340 GT 100 rh 1,000-14,000 Extra length twist drills, series 2 HSS 2462 HSS 236 DIN 340 GT 100 rh 1,000-10,000 DIN 1869 N rh 2,700-13,000 HSCO 317 HSS 503 DIN 340 N 2,36 rh 0,500-26,000 DIN 1869 GT 100 2,36 rh 2,000-13,000 HSCO 336 HSS 528 DIN 340 GT 100 2,36 rh 1,000-16,000 DIN 1869 GT50 rh 3,000-13,000 HSCO 396 HSS 671 DIN 340 GT 100 rh 1,000-12,000 DIN 1869 GT 100 rh 2,700-8,500 HSCO 617 HSCO 619 DIN 340 Ti rh 1,000-13,000 DIN 1869 GT 100 rh 3,000-10,000 HSCO 669 DIN 340 Ti rh 1,000-10,200 Extra length twist drills, series HSS 237 std. N rh 0,500-1,500 DIN 1869 N rh 3,500-13,000 Extra length twist drills, series 1 HSS 504 DIN 1869 GT 100 rh 2,500-13,000 HSS 235 HSS 529 DIN 1869 N 2,36 rh 1,600-13,000 DIN 1869 GT50 rh 2,500-13,000 HSS 502 DIN 1869 GT 100 2,36 rh 1,950-13,000 Extra length twist drills HSS 524 HSS 242 DIN 1869 GT50 rh 2,000-12,700 std. GT 100 rh 6,000-12,000 HSS 670 HSS 243 DIN 1869 GT 100 rh 1,980-12,700 std. GT 100 rh 8,000-12, GUHRING and its products
6 Extra length twist drills Carbide tipped spade drills HSS 244 Carbide 707 std. GT 100 rh 10,000-12,000 std. rh 3,000-12,000 Aircraft extension drills, 6 inches long Masonry drills HSS 577 Carbide 716 NAS 907 N rh 1,500-8,000 std. N rh 3,000-15,000 HSS 579 NAS 907 N 2,36 rh 1,500-8,000 Bushing length twist drills Aircraft extension drills, 12 inches long HSS 211 DIN 339 N 2,36 rh 0,800-20,000 HSS 578 HSS 561 NAS 907 N rh 1,500-8,000 DIN 339 N rh 2,400-5,000 HSS 580 HSS 666 NAS 907 N 2,36 rh 1,500-8,000 DIN 339 N rh 1,000-13,000 Taper pin drills HSCO 311 DIN 339 N 2,36 rh 1,100-19,000 HSS 531 DIN 1898 N 2,36 rh 1,000-12,000 Carbide-tipped twist drill Oil feed type Carbide 703 Oil feed drills DIN 8037 N rh 1,700-24,000 Carbide 704 HSCO 1131 DIN 8038 N rh 1,500-24,500 std. GT 80 IK rh axial 5,000-20,000 Kevlar drills HSCO 1132 std. GT 80 IK rh axial 5,000-20, HSS 390 std. N rh 2,500-12,000 std. N rh axial 3,000-13,000 GUHRING and its products 31
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results
CLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
1978-83 Malibu 1978-87 Monte Carlo 1978-87 El Camino
Important facts about this kit. 1. The dash panel used in this picture is used by permission of Covan's Classic. 2. This kit requires some modification to your original under dash wiring harness. It is
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
RAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
METALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
zeus Marking Technology
zeus Marking Technology Marking Tools Marking Rolls Engraving Technology Die Premium-Marke von Hommel+Keller zeus MARKING TECHNOLOGY zeus is a premium brand that stands for highest quality, precision,
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
This Addendum supplements and clarifies the contents of Service Bulletin SB 12-11-09
SERVICE BULLETIN 12-11-09 ADDENDUM Issue Date: 13-01-08 This Addendum supplements and clarifies the contents of Service Bulletin SB 12-11-09 NOTE: The service bulletin available for download has been updated
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014
Cotter bolts according to DIN EN 22340/ISO 2340 form A without pin holes form B with pin holes Example for ordering: form A: Bolt without pin holes according to DIN EN 22340/ISO 2340, d=10mm, l=30mm, electroplated
AISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
PRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
SDS PLUS 4 Claw (4 Cutting Edges) SDS-Plus
MASONRY DRILL BITS SDS-Plus Rotary Hammer with SDS chuck or SDS adapter 5/32"x6" to 1"x10" SDS-Plus Masonry Drill s are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
comprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
PRELIMINARY BROCHURE. Uddeholm Corrax
PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.
IN00419 (rev A) Aqua 6 Glide Quadrant and Off-set Quadrant Enclosure
IN00419 (rev A) Aqua 6 Glide Quadrant and Off-set Quadrant Enclosure Instruction suitable for both Quadrant & Off-set Quadrant variations. Instruction suitable for both Right and Left Hand fixing variations
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
400 x 8 HUBS 4 HOLE HUBS
400 x 8 HUBS HUB - 4001 400 x 8 Tire, Hub and Bearing HUB - S402 Spindle HUB - B403 Bearing - LM44643 HUB - R404 Race - BM44610 HUB - S405 Seal HUB - S406 Seal - HD203025 HUB - S407 Seal - CR HD12428 HUB
New Product Hotline - 800-336-3575
Dia. M12-1.25 (continued) 6-242 M12-1.25 12.56mm 37.5mm 11.5mm 6-375 M12-1.25 14.25mm 41.5mm 14mm 6-263 M12-1.25 12.83mm 32.5mm 7mm 6-320 M12-1.25 12.83mm 41.5mm 14mm 6-322 M12-1.25 14.27mm 30.5mm 6mm
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
ORDER /RENDELÉS : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62
/ : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62 ORIG. 001. X50000 1 mm DRILL METAL DECKER 1 mm METAL / / METAL DRILL INPUT RANGE OF QUALITY BRAND.
STAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
High speed steel Carbide tools Bud welded
Catalogus komcateng 01-2008 KIM Komeetstaal Postbus 51-7000 AB Doetinchem Fabriekstraat 42-7005 AR Doetinchem Tel: (0314) 343000 Fax: (0314) 332471 E-mail: info@komeetstaal.nl Site: www.komeetstaal.nl
Milling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
1970-72 Chevelle. 1970-72 Chevelle. (500645) Gauge Cluster Kit Installation Instructions. (500645) Gauge Cluster Kit Installation Instructions
1970-72 Chevelle (500645) Gauge Cluster Kit Installation Instructions 1970-72 Chevelle (500645) Gauge Cluster Kit Installation Instructions STEP 1: There are 4 small gauges. This is a photo of the bare
MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
UDDEHOLM ELMAX SUPERCLEAN
UDDEHOLM ELMAX SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our
Application Material Guide (AMG) Chart found on back cover 1-800-877-3745
Application Material Guide (AMG) Chart found on back cover Precision Dormer has expanded its range of high performance drills with the new. Manufactured with productivity and performance in mind, the HYDRA
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
Turbine blade machining Intelligent tooling solutions cutting your costs...
Turbine blade machining Intelligent tooling solutions cutting your costs... www.unimerco.com Tooling solutions for turbine blades Your innovative partner We aim at improving the competitiveness of our
KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.
KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.
172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT
-J00 REV. 00-- DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT GENERAL Kit Number -A, 0-, -, 0-, -, - 0, -0 Models These kits fit and later FXST, FXSTB, FXSTC, and and later FXDWG Harley-Davidson model
UDDEHOLM BALDER UDDEHOLM BALDER UDDEHOLM STEEL FOR INDEXABLE INSERT CUTTING TOOLS
UDDEHOLM BALDER Reliable and efficient steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be considered,
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Application Outboards Faria 5 Gauge Set* Publication No. Description Part Number Honda Code PII53606A White faced, flat lens 06300-ZW5-010ZB 6315410 Issue Date Black faced, flat
VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819
VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,
Cutting Processes. Simulation Techniques in Manufacturing Technology Lecture 7
Cutting Processes Simulation Techniques in Manufacturing Technology Lecture 7 Laboratory for Machine Tools and Production Engineering Chair of Manufacturing Technology Prof. Dr.-Ing. Dr.-Ing. E.h. Dr.
TECHNICAL BULLETIN SUBJECT: AFT FUSELAGE BULKHEAD 407-030-027-101 AT FS 231.4, INTRODUCTION OF.
TECHNICAL BULLETIN DATE REV No. 407-07-78 Date SEP 19, 2007 Page 1 of 17 MODEL AFFECTED: 407 SUBJECT: AFT FUSELAGE BULKHEAD 407-030-027-101 AT FS 231.4, INTRODUCTION OF. HELICOPTERS AFFECTED: Model 407
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
Product catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
Turbine blade machining. Intelligent tooling solutions cutting your costs
Turbine blade machining Intelligent tooling solutions cutting your costs Your innovative partner We aim at improving the competitiveness of our customers by reducing the unit costs in the cutting processes.
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
RAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
A Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
CNC Applications Speed and Feed Calculations
CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning
Accessories for Dial Indicators and Dial Comparators
Chapter - page Test Indicators Testing of Test Indicators, Dial Indicators and Dial Comparators 3-2 Test Indicators Puppitast 3-3 Accessories for Test Indicators 3-5 Dial Indicators Mechanical Dial Indicators
catalogotaglio02 cuttingtools02 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills
9 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese per cave End mills
MisMatched Unions have caused fatal accidents! Do you know :
MisMatched Unions have caused fatal accidents! Do you know : what are Weco Unions and who makes them? what are the Dowell Standards? of the potentially fatal hazards? how to eliminate the hazards? what
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
Industrial Strength Rocket Launcher
Industrial Strength Rocket Launcher Description: Instructions for the construction of an industrial strength rocket launcher for use with paper rockets. Materials: Schedule 40 PVC piping and bushings from
Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
Advantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Alroy Microwave & Electronics Limited
Alroy Microwave & Electronics Limited Waveguide flanges and hardware, tubing, straights, cast bends, swept bends, twists, tapers and accessories WG-coax transitions Rotating joints Flexibles Filters Cross
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
KELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
FACTORY INSTALLED OPTIONS:
Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,
CFF-1 Follow Focus One C1241-0001
CFF-1 Follow Focus One C1241-0001 Original Instructions: English Publication No. C1241-0001-800/1 Copyright 2011 All rights reserved throughout the world. No part of this document may be stored in a retrieval
550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement
T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs
Meter Units. Inch and Metric Threads. General. Application. How to Order 35470 R2 09/12
Meter Units Inch and Metric Threads General Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan
Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters
UDDEHOLM VANADIS 30 SUPERCLEAN
UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Driven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
technical The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob Mattias Svahn, Lars Vedmar and Carin Andersson Recently, a new type of hob with carbide
Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make the property profile
SAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
HOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
Drill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
IN00378 (rev A) Corner Entry
IN00378 (rev A) Corner Entry Before You Start Check that the tray has been installed correctly and that it is level (Fig. A), tiled down onto and sealed to the manufacturer s guidelines. Please Note: All
Weeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
Technical Information
tapping Technical Information Troubleshooting Guide 115 TAP DOES NOT START Program depth: Tap drill size: Tap sharpness: Compression stroke may use up the entire program depth. Check for tap drill size.
IDT TM IN-DIE TAPPING
IDT TM IN-DIE TAPPING In-Die Tapping PAGE NUMBER HY1024 Series 1 ME1024 Series 2 LP25M6 & LP516M8 Series 3 Accessories and Replacement Parts LP Extensions 4 Forming Taps 5 Pitch Inserts and Tapholders
Tooling concepts Gear milling
Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing
Static and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
SS-EN ISO 9001 SS-EN ISO 14001
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties
Milling Tools These are the tools currently available for use with the milling machine
Jason Ward Page 1 of 5 Milling Tools These are the tools currently available for use with the milling machine T1 Milling Tool The missile-shaped T1 milling tools are the highest precision of T-Tech's milling
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
COMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
MERCEDES 190-SERIES (W201)
190-SERIES (W201) 1982 / 1993 MRC-006 MRC-012 MRC-012 MRC-006 MRC-018 MRC-024 MRC-024 MRC-018 MRC-006 Tie Rod End Outer/ Rot Başı M12x1,5Lht 0003384510, 0008386010 MRC-012 Tie Rod End Inner / Rot Başı
Driven & Static CONTENT. Overview... Mazak Tooling... Mori Seiki Tooling... Nakamura Tooling... Driven & Static. Tooling Rebuild service...
205 CONTENT 207 Citizen Tooling.............. 209 Daewoo Tooling............. 217 Haas Tooling................ 221 Mazak Tooling............... 223 Mori Seiki Tooling.......... 249 Nakamura Tooling..........
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Uddeholm Sleipner. Uddeholm Sleipner
Uddeholm Sleipner 1 UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on our present
SECUREPAK DIGITAL TORQUE TESTER
SECUREPAK DIGITAL TORQUE TESTER Overview: The SecurePak Torque Tester is used to test and measure applied torque. The system firmware includes functions to automatically zero the unit when no torque is