System S 3 cliq seismic resistant. exposed, seismic resistant. OWAlifetime collection

Transcription

1 System S cliq seismic resistant exposed, seismic resistant OWAlifetime collection

2 System S cliq exposed, seismic resistant The system fulfills the requirements according to ASTM E 0MN-0a, Heavy Duty, according to ASTM C and all requirements according to EN. Stretched hanger wire, gauge (>.0 mm) and of three full turns (0 each) provided by the customer Main tee cliq--mr, slots at 00 mm,. mm or inch Cross tee cliq--ct, length 00 mm, mm or Cross tee cliq--ct, length 00 mm, 0 mm or Wall angle, for example no. / Space bar no., short Space bar no., long Screw or pop by customer Strut no. 0 or CD-Profile 0/ 0. mm by customer 0 Seismic perimeter clip no. spc0 Seismic joint coupling no. sjc0 for cliq--mr Seismic joint coupling no. sjc0 for cliq--ct short Wall perimeter no. /, / mm or similar Modul distance 00 The grid system S cliq fulfills the essential requirements according to ASTM E 0M-0a. The grid system is tested according to ASTM C - and EN by a notified body and ISO 0 certified Lab (LGA Nürnberg TÜV Rheinland, Germany). The tests for the pull out force of the cross tees were carried out with. kn (approx. kg) tension. This system achieved the highest load bearing classification according to ASTM C as Heavy Duty with more than.0 lb/linear feet (. kg/m) for the main tees. These are the essential requirements according to the seismic design categories D, E and F defined in ASTM E 0M-0a. 00 Section dimensions: Main tee cliq--mr Cross tee cliq--ct long / Cross tee cliq--ct short 0 0 < Technical data mineral tiles Edge details Thickness 00 / < 00 Maße 00 x 00 mm, x mm, x, 00 x 00 mm, 0 x mm, x Reaction to fire A-s,d0 in accordance with EN 0- / Class A in accordance with ASTM E Metal suspensions All profiles are zinc galvanized and exposed faces are white painted. For further details please consult our OWAlifetime collection price list < / / 0 / / Suspension depth mm (from underside of soffit). For ease of panel removal 0 mm is recommended. 00 < Approx. mm and 0 mm (OWAcoustic premium)

3 Installation examples (also for module mm and ): Areas m 00 The hanger fixings must be installed according to ASTM E 0M- 00 0a, paragraph... and / / < 00 / Areas > m 00 till m 00 0 / < Additional tasks for areas > m 0 00 / 00 < Lateral force bracings are required for all ceiling areas greater than 000 ft (approx. m ). / < distace: from the wall. m / centres of horizontal restraint points. m 0 / Four -gauge (>.0 mm) wires in all directions secured to the main runner. Angle should not exceed from the 0 plane of the ceiling. A strut must be installed in this area (for example section no. 0, see page ). 00 / 00 / < < / 0 Areas > m 00 < Additional tasks for areas > m < All ceiling areas exceeding 00 ft (approx. m ) must be None 0 separated by a seismic joint, bulkheads braced to structure of full height must partitions be moveable None 0 Separate seismic joints for each type of tees (MT, CT) None 0 None < 00 < 00 < < 00 < 00 < < < 00

4 Cross-section: Section: Wall perimeter: Wall perimeter A / / / / / / / / / / / / / / 0 0 / B Wall perimeter 0 Wall perimeter B / / / / / / / 00 / / 00 / / / / / / 00 / / / / 00 / / 00 For other examples of wall perimeters and installation see OWA-Installation guide no. 0 E and ASTM E 0/E 0M-0a. Wall perimeter A Alternative between wall perimeter B and B and tees with seismic perimeter clip no. spc0 and no. spc B: Cross-section / / / 00 / / 00 / 00 / / / 0 / / / Longitudinal section B: / / / / None None must be moveable None must be moveable No No mu No mu has mu has None fo has mustforc be has to b forc forc force-lo Installation of the seismic perimeter clip: None None must mustbe bemoveable moveable / / The seismic perimeter clip has to be attached by using a hammer.

5 System S cliq exposed, seismic resistant Lateral force bracing for horizontal restraint according to ASTM E 0/E 0M-0a: Type : Type : Lateral force bracing with stretched hanger wire according ot ASTM E 0/E 0M-0a for Type and : < 0 mm. To connect the profiles with the grid-system the The of the CD-Profiles must be lower end has to be notched. 00 / 0 00 / System-related accessories: < 0 < 0 < 0 < < 0 < 0 < 0 < 0 < 0 < 0 < 0 < Top view 0 < 0 < 0 0 seismic joint coupling 0 no. sjc0 and sjc0 (consist of pieces and small components). This but joint has to be suspended on both sides. / 0 0 None. The nut has to be fixed by a locknut. None None must be must moveable. be moveable. The nut The nut has to be has fixed to by be a fixed locknut. by a locknut. 0 seismic perimeter clip None no. spc0, locking of the main None runner and must cross be moveable. tee in the wall The nut area. has to be The fixed nut by a locknut. has to be fixed by a locknut. None must be moveable. The nut has to be fixed by a locknut. None. The nut has to be fixed by a locknut.

6 0 0 / / Material requirements per m (approximations): Dimensions in mm No. 0 Description 00 x 00* 0 cliq--mr Main tee 0. m cliq--ct Cross tee short 0. m cliq--ct Cross tee long. m Stretched hanger wire 0. Stück 0 Strut 0.0 Stück Space bar depending on room size and shape / Wall 00 angle depending on room size and shape / * other dimensions see brochure S cliq / Weight per m : x 00 0 Suspension system approx.. kg/m Tiles mm, appros.. kg/m Light fixtures: OWA can supply compatible light fixtures for this system. 0 For details of performance, installation and fire resistance please see OWA-brochure no. 0 e and OWA- Installation Guide no. 0 E. System description: System S cliq seismic resistant Quality Statement: OWAcoustic mineral panels are free from harmful materials such as asbestos and formaldehyde. A statement from the German institute for Building Technology is available. The mineral wool used in these panels is biodegradable. The criterions of the zero-ranking as a carcinogenic material in the chemical prohibition ordinance ( appendix) section bio-persistent fibres are complied with and therefore carries the RAL-Seal of mineral wool guarantees. Mineral tiles according to EN and DIN : Air Permeability Class pm Formaldehyde FH Class TVOC class TÜV Rheinland LGA Bautechnik GmbH Building Structure Diagnostics Certified acc. to DIN EN ISO 00 TEST CERTIFICATE No. BBMT000/0 Date: Jul nd 00 Purchaser: Odenwald Faserplattenwerk GmbH Dr. Freundt- Strasse Amorbach, Germany Order dated Jul th 00 Object of the Order: Deflection tests / Measuring of tees deflection of a suspended ceiling system Specimen material, or test sample: The test was performed on Jul th 00 The samples were received Jul th 00 Identification: suspended ceiling system consisting of: OWAconstruct main tees, OWAconstruct cross tees OWAconstruct cliq suspended ceiling sections; hangers: Nonius The present certificate contains text sheets and appendix. The certificate results solely refer to the specimen materials/test samples that are stated in the test report. The present certificate can be published in its complete formulation only. Any publishing of its shortened form or of an extract from it is only upon a prior permission by TUEV Rheinland LGA Bautechnik GmbH allowed. BBMT000_0_Prüfzeugnis_Owa_Cliq_E.doc / sheet of TÜV Rheinland LGA Bautechnik GmbH Registered at the Municipal Court of Nuremberg BBMT Tillystraße 0 Nuremberg Nuremberg HRB 0 Ph.: + (0) -00 Fax: + (0) - Managing Directors: Achim Blinne, Hans-Hermann Ueffing bautechnik@de.tuv.com Tax No. //0 VAT ID No. DE Installation: All integrated services should be secured separately. Installation should be carried out in accordance with the information contained in OWA-Installation guide 0 and ASTM E 0M-0a. Installation should be carried out in accordance with the information contained in system leaflet S cliq seismic resistant and OWA-Installation Guide no. 0 E. All components are CE labelled. Component list: OWAconstruct cliq--mr main tee OWAconstruct cliq--ct cross tee short OWAconstruct cliq--ct cross tee long OWAconstruct wall angle no. / OWAconstruct space bar no. OWAconstruct strut no. 0 OWAconstruct perimeter clip no. spc0 OWAconstruct seismic joint coupling no. sjc0 or no. sjc0 None The test must report be moveable. of TÜV The nut Rheinland has to LGA be fixed by a locknut. Bautechnik GmbH shows the tests of the loadbearing capacity and the seismic requirements according to ASTM E 0M-0a Product Warranties The information provided in this leaflet is based on the standards and data available at the time of publication. Any performance, warranties or guarantees provided, expressed or implied, are subject to the exclusive use of OWA components and the installation of those components in accordance with our recommendations. Failure to adhere to these conditions will result in the invalidation of any performance claims, warranties or guarantees and rejection of any liability. OWA reserves the right to make any technical improvements to the products, systems or services without prior notice. All goods and services are supplied in accordance with our current Terms and Conditions of Sale. Errors excepted! Odenwald Faserplattenwerk GmbH Dr.-F.-A.-Freundt-Straße Amorbach tel info@owa.de Brochure S cliq seismic resistant e 000